User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
22/48
2.1.2.7 Global Path
In the task state, after selecting the global path button, the planned path from the current machine
position to the target point will be displayed on the page in real time. If it is not displayed, it may be
obstructed by obstacles between the machine reaching the target point, making it impossible to plan
a driving path.
The global path will only be generated in the task state, and the path will not be displayed even
if it is selected in the non-task state.
2.1.2.8 Soft emergency stop
After selection, the machine enters the soft emergency stop state. In the emergency stop state, the
motor loses power and can be driven at will. Soft emergency stop and hard emergency stop are
controlled separately, and they cannot be offset by each other.
In the emergency stop state, the machine motor will enter a disabled state. Do not use it on a
ramp or at an inclined position.
2.1.3 Toolbar
The lower left corner of the monitoring page is the operation bar, from left to right are
2.1.3.1 Network settings
2.1.3.1.1 Wireless network (obsolete)
Used to bridge WiFi, the latest chassis is bridged through a router, please refer to router settings .
2.1.3.1.2 Wired network