User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
18/48
Elevator waiting point:
When there are multiple devices on site and there is only one elevator, you need to calibrate
the No. 8 attribute waiting point on different equipment at different locations outside the
elevator. When there is one device in the elevator, other devices wait in the No. 8 waiting
point. The elevator is free. In other cases, there is no need to calibrate the 8th point.
Charging pile point:
The point calibration time of the charging pile needs to be consistent with the actual
placement position of the charging pile on the map, and the direction of the point arrow
needs to be consistent with the opening position of the V-shaped groove of the charging
pile. If multiple charging piles need to be placed in the same scene, it is necessary to
ensure that the distance between the two charging piles is at least 80cm. At the same time,
other obstacles cannot be placed within 50cm on the left and right sides of the charging
pile to prevent the device from recharging.
Deceleration point:
When the deceleration point is calibrated, the bottom and top corners of the point triangle
should be calibrated horizontally in the middle of the gate or gate. The point and the
channel are at an angle of 90 degrees. As shown
2.1.2.3 Forbidden line
Calibration method: