User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
16/48
other machines
in the narrow
area, the
current machine
will be in the
narrow area.
Wait for the
point to wait.
Reference for
the use of
narrow areas:
narrow areas
Deceleration
point
76 In the
deceleration
zone, the point
with an attribute
of 76 is the
deceleration
point. If there is
a ramp or road
sill on site, the
deceleration
zone can be
calibrated at the
corresponding
position. The
deceleration
zone point
calibration
method is
similar to the
gate &
electronic gate
calibration. It is
necessary to
ensure that the
point arrow and
the channel are
proportion
When the machine
enters the vicinity
of the deceleration
point, the speed
will be reduced to
the percentage of
the current full
speed.
distance
When the machine
approaches/leaves
the point, it starts
to decelerate.
One-way
deceleration
Only slow down
when approaching
the point, and
immediately
accelerate to full
speed after
passing the point.