User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
13/48
point 3 to point internal and
4 in the external numbers
elevator. The of the elevator
position of need to be one to
attribute 4 one.
between
different floors
should be as
consistent as
possible with
respect to the
position of the
elevator!
Gate point 7 When the gate Gates & electronic
& electronic gates need to be
gate marked with the
communication corresponding id
module is of the control
installed in the
machine use
ID
module in the
point. If the id is
environment, abnormal, it will
you need to cause
calibrate the uncontrollable or
position of the wrong control of
gate & other equipment.
electronic gate
In the control gate
& electronic gate
parameters, you
can configure how
far away from the
point to start the
control module,
and how far away
from the point to
release the
module.
with the
attribute of 7 on
the map. It is
necessary to
ensure that the
point arrow and
distance
the channel are
at an angle of
90° during the
point calibration
of the gate.
One-way If a single gate &