User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
11/48
Method of deleting/editing points:
Double-click the green triangle representing the point on the map, an edit box will pop up, click
Delete to remove the point, or fill in the information that needs to be modified, and click the OK
button.
Use the interface to calibrate the point at the specified location on the map or the current
position of the machine. For specific operations, please refer to the interface document: Delete
the marker point
The point calibration method is similar to the correction operation. Click on the page to select the
position. After clicking, continue to move the mouse to select the orientation. After releasing it, the
point attribute edit box will pop up.
Name: The name used for the current calibration point. This name can be used to make the machine
directly reach the corresponding coordinates through tasks.
Type: The chassis distinguishes some special points according to different types, so as to realize
some special operations. The specific distinctions are as follows:
Common
name
Types of Description Attributes
Property
description
Normal point 0 For the task of
moving to a
common point,
the machine will
only move to
make its
position and
orientation
coincide with
no no