User's Manual
32
Chapter VI Attention to Disinfection Robot
I.
Matters needing attention in charging power supply
Always keep 1. charger dry when stored and used;
2.
as far as possible in the electricity 20-30% charge, the electricity can reach
90% robot can work, the purpose is to the battery can play a safe maintenance
and protection role;
3.
please use the charger equipped by the robot to charge, the charger is
forbidden to replace with other chargers, the replacement will cause serious
damage to the machine.
II.
Precautions for daily use
1.
do not boot state and operating state forced push the robot, forced push
will lead to the robot can not run properly;
2.
the shutdown state can be implemented robot move to other places, but
not too fast, slow push;
3.
in order to ensure that the robot can be used normally, please ensure that
the robot boot position is the boot point;
4.
the robot in the process of operation, please remove the robot to pass
through the obstacles in the route, especially stainless steel pipe twigs,