User's Manual

30
Chapter 4: The Use of Routine Disinfection
Robot
I. Processes and Steps for the Daily Use of Robots
Push the robot to the starting point;
Click on the power switch to turn on the robot;
After the robot opens, wake up the robot and say to the robot "Hello
creation ";
After the robot wakes up, select the task in the screen and click the "execute"
button;
The robot starts executing the planned disinfection path;
After the robot completes the disinfection, the task is over, if the disinfection
state is interrupted halfway, click on the robot screen "end the task ", button
robot back to the boot point;
Press the power switch to turn off the robot.