User's Manual
ENEN
15 16
Direct Arm/Disarm by RFID Tag
When direct Arm/Disarm by RFID tag is enabled, users can directly
tap RFID tags to Arm/Disarm the system. However, the function
consumes power greatly. It is suggested to disable the function,
that is, set the keypad is in sleeping state. Users need to press the
[*] key before tapping RFID tags.
Disable Direct Arm/Disarm by RFID Tag
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful. After the setting, you need to
press the [*] before arming/disarming the system.
Enable Direct Arm/Disarm by RFID Tag
User can Arm/Disarm the system by RFID tag directly, which is
convenient but consumes more power.
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Note: Default setting: 1, enable the function of direct Arm/Disarm by RFID tag.