User's Manual

2-2.2 m

(6.6’-7.3’)

Mounted on wall or

corner at a height of 2-2.2

meters (6.6'-7.3') from the

oor.

The best installation placement

is when the MD-20 is facing

90°to the walking direction

or pathway of any would-be

intruders.

est

Set the K1 system to T

est

Mode (from the K1, within

the smanos home app),

and then trigger the Motion

Sensor by pressing the

tampering switch on the

back of the sensor (MD-

20 mounting plate must be

removed), the K1 Hub will

sound 3 beeps to conrm

the connection and range

with K1 Hub is good.

Mounting

Impor

tant: Make sure the UP mark on the Back Cover is pointing up

before mounting the MD-20 on a at surface. Once level, mount

the mounting bracket to the wall using either the double face take

or the mounting screws with mollys, both of which are included in

the package.

Notice: Removing the Back Cover will result in an alarm; you

can disarm the alarm with the KP-20 or through your K1 app

in the smanos home and then continue the installation in peace

& quiet.

Specications

Model: MD-20

ower: 3V CR123A Li-Mn battery x 2 pcs

Frequency: 915MHz

Wireless range: ≤ 80 m (in open area)

Operating conditions:

0-50°C/ 32° - 122°F, humidity < 90% RH (non-condensing)

Dimensions (L x W x H): 85 x 85 x 36mm / 3.35" x 3.35" x 1.42"