User's Manual
LED Indication
Steady Red: System Armed
Steady Blue: System in Home Mode
Steady Green: System Disarmed
Blink once every 3 seconds: Low battery, please change the battery.
Tamper Switch
Anti-tampering protection ensures that any attempts to move the
Keypad off the Back Cover results in an alarm and push notication.
Non-numeric Keys
Non-numeric Keys are used to set the password for changing the
status of K1 system. The default password is shown as below and
can be changed in app.
;6ɑ
;6ɑ
Press the key at the left top 6 times
How to Use After Pairing
Make sure the UP mark on the Back Cover points up before putting
the Keypad on a at surface.
Arm
Rotate the Keypad Ring to the right, and then enter the Keypad
password (if you have not changed the default password, Press the
left top key 6 times). The indicators will turn to Red.
Home Mode
Rotate the Keypad Ring to the right rst, then to the left, and then
enter the Keypad password (if you have not changed the default
password, Press the left top key 6 times). The indicators will turn to
Blue.