User Manual

MANUAL：
1.Read Code:
By reading the car trouble code With Dr.Driver, you can see a brief description of the trouble code
and code generated by the vehicle. We also provide the function to clear the trouble code. This
will give you instant insight into the current condition of your car.
2.Freeze Frame:
Use Dr.Driver to freeze frame data to view frozen frame data, which can be used to provide vehicle
data when the check engine indicator is lit. Or you can switch to the Mode01 segment function,
which is a data that can measure all vehicle mode 01 support.
3.Smog Check :
We can carry out smoke inspections for your car and use Dr.Driver to scan your car for partial
emissions testing. The test results will tell you if you can pass the smoke test. In addition to
providing manual repetitive testing, we also offer automatic scanning for continuous repetitive
scanning, allowing you to test on the road without touching your phone.
4.Mode6:
Mode 6 refers to the advanced test results of the on-board diagnostic monitoring system. For
example, the monitor includes an oxygen sensor and a misfire counter. Mode 6 will tell you if your
car has passed the test and if its value is within acceptable limits. Dr.Driver offers 2 different data
formats, raw data and formatted data, which you can switch between options as needed.