Uconnect 8.4A/8.4AN ® 15UC84A-526-AC Third Edition Uconnect® 8.4A/8.
SECTION TABLE OF CONTENTS PAGE 1 IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 ALL ABOUT UCONNECT® ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 3 UCONNECT® 8.4A — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 3 4 UCONNECT® 8.4AN — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . .
IDENTIFYING YOUR RADIO CONTENTS ! IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . .4 ▫ Key Features . . . . . . . . . . . . . . . . . . . . . . . . . .
4 IDENTIFYING YOUR RADIO IDENTIFYING YOUR RADIO Key Features Uconnect® 8.4A/8.4AN The 8.4A and 8.4AN share some features between them, but the 8.4AN has some features that sets it apart. The below features are shared between them: • 8.4” Touchscreen • Hands-free/Bluetooth® • USB port, AUX port and SD Card slot — If Equipped • Touchscreen Climate Controls • SiriusXM Satellite Radio with 1yr Trial Included — If Equipped • Uconnect® Access — U.S.
IDENTIFYING YOUR RADIO 5 The 8.4AN sets itself apart by offering these unique NOTE: 3D Landmarks are visible at 250ft and below, 3D features: City Models are visible at 50ft and below and Digital Terrain is visible at 100mi and below. • HD Radio — U.S. Market Only • Navigation Standard • One-shot destination entry • 3D content (Select this option and zoom to an appropriate level.
ALL ABOUT Uconnect® ACCESS 2 CONTENTS ! INTRODUCTION TO Uconnect® ACCESS . . . . . .9 ▫ What Is Uconnect® Access? . . . . . . . . . . . . . . . .9 ▫ Included Trial Period For New Vehicles . . . . . . .13 ▫ Features And Packages . . . . . . . . . . . . . . . . . .15 ! GETTING STARTED WITH Uconnect® ACCESS . .15 ▫ Registration . . . . . . . . . . . . . . . . . . . . . . . . . .15 ▫ Set Up Your Uconnect® Payment Account . . . . .23 ▫ Download the Uconnect® Access App . . . . . . .26 ▫ Set up Via Mobile . . .
8 ALL ABOUT Uconnect® ACCESS ▫ WiFi Hotspot . . . . . . . . . . . . . . . . . . . . . . . . .71 ▫ SRT Performance Pages/SRT Performance Pages Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 ▫ Voice Texting . . . . . . . . . . . . . . . . . . . . . . . . .92 ▫ Remote Door Lock/Unlock. . . . . . . . . . . . . . .102 ▫ Remote Vehicle Start . . . . . . . . . . . . . . . . . . .108 ▫ Remote Horn And Lights . . . . . . . . . . . . . . . .113 ▫ Via Mobile Apps . . . . . . . . . . . . . . .
ALL ABOUT Uconnect® ACCESS 9 INTRODUCTION TO Uconnect® ACCESS Uconnect® Access provides: To unlock the full potential of Uconnect® Access in your • The ability to remotely lock/unlock your doors and vehicle, you first need to register with Uconnect® Access. start your vehicle (if equipped) from virtually anywhere, with the Uconnect® Access App, the Mopar What Is Uconnect® Access? Owner Connect website (moparownerconnect.com) Uconnect® Access enhances your ownership and driving and Uconnect® Care.
10 ALL ABOUT Uconnect® ACCESS 1. The ASSIST And 9-1-1 Buttons On Your Rearview Mirror The ASSIST Button is used for contacting Roadside Assistance, Vehicle Care and Uconnect® Care. The 9-1-1 button connects you directly to emergency services. 2. The Uconnect® “Apps” Button On The Menu Bar At The Bottom Right Corner Of The In-Vehicle Touchscreen This is where you can begin registration for Uconnect® Access, find the apps and purchase WiFi Hotspot on demand. 1 — Voice Recognition Button 3.
ALL ABOUT Uconnect® ACCESS 11 WARNING! ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so. Failure to do so may result in an accident involving serious injury or death.
12 ALL ABOUT Uconnect® ACCESS 1 — Steering Wheel Audio Controls (Left Rear Surface of Steering Wheel) 2 — Uconnect® Voice Command Button 3 — Uconnect® Phone Button 4 — Assist Button 5 — 9-1-1 Button 6 — Uconnect® Access 8.
ALL ABOUT Uconnect® ACCESS 13 Included Trial Period For New Vehicles Your new vehicle may come with an included trial period for use of the Uconnect® Access Services starting at the date of vehicle purchase*. To activate the trial, you must first register with Uconnect® Access. Once registered, Uconnect® Access customers can purchase additional services and Apps over the lifetime of their vehicle ownership. Radio Radio Sales Code Trial Period Included Trial on New Vehicles ONLY Uconnect® 8.
14 ALL ABOUT Uconnect® ACCESS There are a few quick ways for you to identify your radio. For a more complete description, please refer to the User Guide in your glove box or visit DriveUconnect.com. • Both the Uconnect® 8.4A and Uconnect® 8.4AN feature a large 8.4 inch full color touchscreen. • Only the Uconnect® 8.4AN will have the HD Radio icon when listening to FM or AM stations. The icon will be lit when it is receiving an HD Radio signal (not all stations currently broadcast an HD Radio signal).
ALL ABOUT Uconnect® ACCESS 15 NOTE: Should you require assistance anytime during the registration process, call Uconnect® Care at 1-855-792After the trial period, you can subscribe to continue 4241. your service by visiting the Uconnect® Store located within the Mopar Owner Connect website (moparownerconnect.com). If you need assistance, you can also call Uconnect® Care at 855-792-4241. For the latest information on packages and pricing information, visit DriveUconnect.com.
16 ALL ABOUT Uconnect® ACCESS 2. Press “Register” on the reminder screen or select the 3. The Uconnect® Access Registration App will open “Uconnect® Registration” button on the touchscreen and display step-by-step instructions to start your which appears in the “Favorites Tab” on the Apps list. registration.
ALL ABOUT Uconnect® ACCESS 17 4. Enter your email address into the radio touchscreen. 1 — Press To Enter Email Address 2 — Press To Re-enter Email Address 3 — Press To Send 5. This message will display on the touchscreen indicating your email submission was accepted. In a few minutes, you will receive an email which will allow you to register your vehicle for Uconnect® Access. You should open this email and begin your Uconnect® Access registration within 72 hours.
18 ALL ABOUT Uconnect® ACCESS 6. Check for an email from Uconnect® Access that contains your personalized registration link. If you don’t see it, check your spam or junk mail folder. Open the email and click on the link to continue registering. NOTE: For security reasons, this link is valid for 72 hours from the time you submitted your email address into the radio touchscreen.
ALL ABOUT Uconnect® ACCESS 19 2
20 ALL ABOUT Uconnect® ACCESS For additional registration assistance while in the vehicle, turn the ignition on and push the ASSIST button to contact Uconnect® Care. 7. To unlock the full potential of Uconnect® Access in your vehicle, you will need to create or validate an existing Mopar Owner Connect account (previously Owner Center).
ALL ABOUT Uconnect® ACCESS 21 2
22 ALL ABOUT Uconnect® ACCESS 8. Once you are logged in to your Mopar Owner Connect account, you will create a personal Uconnect® Security PIN. The Uconnect Security PIN will be required to authenticate you when accessing your account via Uconnect® Care or performing any remote services such as Remote Door Lock/Unlock, Remote Horn & Lights, or Remote Vehicle Start. 9. If your vehicle qualifies for a trial package it will be presented.
ALL ABOUT Uconnect® ACCESS 23 • Set up your Uconnect® Payment Account (provides the option to purchase WiFi Hotspot and renew your subscription). • Set up your Via Mobile profile on Mopar Owner Connect website (if equipped). Set Up Your Uconnect® Payment Account Setting up your Uconnect® Payment Account allows you to make purchases from your vehicle (such as WiFi Hotspot) and can be used to ensure uninterrupted service at the end of the included trial period.
24 ALL ABOUT Uconnect® ACCESS Setting up AFTER registration and Managing your Uconnect® Payment Account If you didn’t set up your Uconnect® Payment Account when you registered, or you want to make changes later on, just go to moparownerconnect.com to manage your account. 1. Log In to Mopar Owner Connect with your username/email and password. 2. In the upper-right corner of the screen, click on the “Edit Profile” button. 3.
ALL ABOUT Uconnect® ACCESS 25 • Reviewing your current subscriptions to packages and Apps • Changing your Uconnect® Payment PIN, or your Security Question • Viewing transaction history of purchases from the Uconnect® Store 2
26 ALL ABOUT Uconnect® ACCESS Download the Uconnect® Access App The Uconnect® Access smartphone app allows you to remotely lock or unlock your doors, start your engine (if equipped) and activate your horn and lights from virtually anywhere. The smartphone app also features Via Mobile (if equipped) which uses your smartphone’s data plan to access your personal Pandora®, iHeartRadio, Slacker Radio and Aha™ accounts and control them using your vehicle touchscreen.
ALL ABOUT Uconnect® ACCESS 27 2 The Uconnect® Access app is only compatible with select Once you’ve confirmed your smartphone is compatible, iPhone® and Android smartphones. Visit Android and iPhone® users should visit their respective UconnectPhone.com to confirm that your smartphone is app store and search for “Uconnect® Access”. compatible with Uconnect®.
28 ALL ABOUT Uconnect® ACCESS • Use Via Mobile to access your personal Pandora®, iHeartRadio, Slacker Radio and Aha™ from the veUnlike your key fob, the Uconnect® Access app on your hicle and control them using your vehicle touchscreen smartphone can send commands to your vehicle from any distance so long as your phone and vehicle are both in cellular range. The Uconnect® Security PIN that was set up during registration is required for remote services.
ALL ABOUT Uconnect® ACCESS 29 2
30 ALL ABOUT Uconnect® ACCESS To download the app to your smartphone, go to your • Your smartphone must be compatible with the respective app store and search for “Uconnect® Access” Uconnect® Access App (there is no charge to download and install the app to • Vehicle must be in range of a usable and authorized your smartphone).
ALL ABOUT Uconnect® ACCESS 31 3. Why can’t all phones use the Uconnect® Access App? The Uconnect® Access App has been designed 1. How much does the Uconnect® Access App cost? to work on most smartphones with the Apple and Uconnect® does not charge for the App, however to Android operating systems. Visit utilize the Remote Services (e.g., Remote Door Lock/ UconnectPhone.com to confirm that your smartUnlock) a subscription or trial is required to the phone is compatible with Uconnect®. Advantage Package. 4.
32 ALL ABOUT Uconnect® ACCESS NOTE: If you’ve already registered with Uconnect® After registration, link your app accounts to your Via Access, but have not set up your Via Mobile apps, you Mobile Profile on Mopar Owner Connect. If you already can come back to this page at any time by logging in to moparownerconnect.com. Click on “Via Mobile Prohave an account with these apps, click “set up” to enter file”. your information.
ALL ABOUT Uconnect® ACCESS 33 • Click on Help & Support > Select your Brand > System NOTE: When connecting multiple devices, Via Mobile audio will stream using the BT Hands Free Profile, not Updates the Media (A2DP) profile. If using an iPhone®, a USB Using Via Mobile cable may also be used for the data connection. Launch the Uconnect® Access app on your connected Data Usage smartphone and log in with your Mopar Owner Connect Username/Email and password.
34 ALL ABOUT Uconnect® ACCESS Connection Status The Via Mobile button provides a status indication of the smartphone connection for Via Mobile app use. Under “Settings” in the Uconnect® Access app on your smartphone, confirm that Via Mobile data has been turned on.
ALL ABOUT Uconnect® ACCESS 35 2
36 ALL ABOUT Uconnect® ACCESS Purchasing Apps And WiFi Hotspot For Your Vehicle Purchasing Apps And WiFi Hotspot From Within Your Vehicle: Apps and WiFi Hotspot can be purchased from the 1. With the vehicle parked and the radio powered on, Uconnect® Store from within your vehicle, and online at press the “Apps” button located near the bottom the Mopar Owner Connect website right-hand corner of the radio touchscreen. moparownerconnect.com. You must first register and set up a Uconnect® Payment account.
ALL ABOUT Uconnect® ACCESS 37 2. To launch the Uconnect® Store, select Apps > All Apps 3. From the Uconnect® Store, select the service you wish > Uconnect® Store. to purchase.
38 ALL ABOUT Uconnect® ACCESS 4. This will launch the selected service or package into 5. The Uconnect® Store will display a “Purchase Overpurchase mode along with providing additional inforview” message confirming the financial details for the mation. The purchase process begins when you press App you are about to purchase. Press the “Purchase” the “Buy” button on the touchscreen. button on the touchscreen to continue.
ALL ABOUT Uconnect® ACCESS 39 6. The User must select “AGREE” to complete the pur- 7. The Uconnect® Store will ask you to “Confirm Paychase. “DISAGREE” will cancel the purchase and ment” using your default payment method on file in re-direct customers back to the Uconnect® Store landyour Uconnect® Payment Account. Press the “Coming page. plete” button on the touchscreen to continue.
40 ALL ABOUT Uconnect® ACCESS 8. The Uconnect® Payment Account will then ask for your “Payment PIN.” After entering this four digit PIN, press the “Continue” button on the touchscreen to make the purchase. NOTE: Purchased Apps and services can take up to 30 minutes to download, depending on your vehicle’s cellular coverage at time of purchase. If your download takes more than 30 minutes, please contact Uconnect® 9.
ALL ABOUT Uconnect® ACCESS 41 Purchasing Apps Online From Mopar Owner Connect Website You can also purchase Apps or renew your subscription to a package from the Mopar Owner Connect website. Log In to the Mopar Owner Connect website moparownerconnect.com with your username/email and password, and click on the “Store” tab. 1. Log In to Mopar Owner Connect with your username/email and password. 2. Click on the tab that says “Shop.
42 ALL ABOUT Uconnect® ACCESS 3. Click on the link to the Uconnect® Store. 4. You can now browse through the various packages, features and Apps available for your vehicle. Look through your options, read the details, and if you find something you want for your vehicle click on the “Purchase” button.
ALL ABOUT Uconnect® ACCESS 43 Using Mopar Owner Connect The Mopar Owner Connect website moparownerconnect.com provides you with all the information you need, all in one place. You can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle’s features, and easily access your user guides and manuals. It is also where you can manage your Uconnect® Access account.
44 ALL ABOUT Uconnect® ACCESS 2. Edit Profile: To manage the details of your Uconnect® Access account, such as your contact information, password and PIN, click on the “Edit Profile” button to access the details of your account. 3. Shop: 5. Remote Services: For vehicles with an active Uconnect Access subscription, press one of these icons and enter your four-digit Uconnect® Security PIN to command your vehicle to remotely start, lock/unlock doors or sound the horn and lights.
ALL ABOUT Uconnect® ACCESS 45 8. Learn & Use: To get the Uconnect Access App from the Mopar Owner Click on the “Learn & Use” tab to find user guides and Connect website: other information about your vehicle. More specifi- 1. Log on to moparownerconnect.com using the cally, there is a dedicated Uconnect® Access tab in this username/email and password you used when regissection to learn all about your connected vehicle tering your Uconnect® Access system. capabilities.
46 ALL ABOUT Uconnect® ACCESS 5. You can enter up to five mobile phone and/or email addresses to your notifications, and you can customize which ones receive the types of messages. 6. If you add a mobile phone number, you will receive a confirmation text message asking to confirm and receive vehicle notifications. If you are OK with this, reply to the text message saying “yes” (message and data rates may apply, please see your mobile phone provider for details).
ALL ABOUT Uconnect® ACCESS 47 Get started with your Uconnect® Access Apps by pressing the Uconnect® “Apps” button on the menu bar at the Getting Started With Apps bottom right corner of the in-vehicle touchscreen. AvailApplications (Apps for short) in your Uconnect® Access able Apps and features are organized by the tabs on the system are designed to deliver the features and services left of the screen. that you want.
48 ALL ABOUT Uconnect® ACCESS Access features work using the built-in cellular connection. Only Voice Texting the Uconnect® Access App and Via Mobile Apps require a compatible smartphone to work with your Uconnect® Access system. Uconnect® Access In-Vehicle Assistance Features With Uconnect® Access, your vehicle has on-board assistance features located on the rear view mirror designed to enhance your driving experience if you should ever need assistance or support.
ALL ABOUT Uconnect® ACCESS 49 NOTE: In case the “9-1-1” Call button is accidentally pushed, there is a 10 second delay before the 9-1-1 call is placed. The system will verbally alert you that a call is about to be made. To cancel the 9-1-1 Call connection, push the “9-1-1” Call button on the Rearview Mirror or press the “Cancellation” button on the Phone Screen. 2.
50 ALL ABOUT Uconnect® ACCESS Even if the 9-1-1 Call system is fully functional, factors • Wireless network congestion. beyond Chrysler Group LLC’s control may prevent or • Weather. stop 9-1-1 Call system operation. These include, but are not limited to, the following factors: • Buildings, structures, geographic terrain, or tunnels. • The ignition key has been removed from the ignition If your vehicle loses battery power for any reason (inand the delayed accessories mode is active.
ALL ABOUT Uconnect® ACCESS 51 Requirements • This feature is available only on vehicles sold in the US. • Vehicle must be properly equipped with the Uconnect® Access System. • Vehicle must be in range of a usable and authorized cellular signal. • Vehicle must be powered in the ON/RUN or ACC (Accessory) position with a properly functioning electrical system. WARNING! • Never place anything on or near the vehicle’s wireless and GPS antennas.
52 ALL ABOUT Uconnect® ACCESS WARNING! (Continued) WARNING! (Continued) • The Occupant Restraint Controller (ORC) turns on the Air Bag Warning Light on the instrument panel if a malfunction in any part of the air bag system is detected. If the Air Bag Warning Light is illuminated, the air bag system may not be working properly and the 9-1-1 system may not be able to send a signal to a 9-1-1 operator. If the Air Bag Warning Light is illuminated, have an authorized dealer service your vehicle immediately.
ALL ABOUT Uconnect® ACCESS 53 FAQs Roadside Assistance Call 1. What Happens If I Accidentally Push The 9-1-1 Easy Call To Roadside Assistance 24/7 Using Assist Button On The Mirror? You have 10 seconds after Button pushing the 9-1-1 button to cancel the call. To cancel the call, either push the “9-1-1” button again, or press the “cancel” button on the in-vehicle touchscreen. 2.
54 ALL ABOUT Uconnect® ACCESS Uconnect® Access In-Vehicle Assistance Features • Vehicle Care — Total support for your Chrysler Group vehicle. With Uconnect® Access, your vehicle has on-board assistance features located on the rear view mirror designed to How It Works enhance your driving experience if you should ever need You or someone in the vehicle simply presses the ASSIST assistance or support. button located on the rear view mirror and you will be Description presented with your ASSIST options.
ALL ABOUT Uconnect® ACCESS 55 Requirements Disclaimers • This feature is available only on vehicles sold in the If Roadside Assistance is provided to your vehicle, you agree to be responsible for any additional roadside US. assistance service costs that you may incur. In order to • Vehicle must be properly equipped with the provide Uconnect® Services to you, we may record and Uconnect® Access System.
56 ALL ABOUT Uconnect® ACCESS FAQs Description 1. What Is The Phone Number For Roadside Assistance? The phone number is 800-521-2779. Yelp® is a familiar, widely used website and mobile app that connects people to great local businesses. Now with Uconnect® Access, Yelp® has been adapted for your vehicle, and on the go capability.
ALL ABOUT Uconnect® ACCESS 57 • The live and local search engine will scan 12 categories How It Works and millions of POIs to provide drivers with a local 1. Using the touchscreen, launch Yelp® by pressing guide for real word-of-mouth recommendations. Apps > All Apps > Yelp®. • With one press, select from the list to find location OR address, phone number, user ratings, hours of operabutton and Using voice recognition, push the tion (if available) and price ratings (if available). say “Launch Yelp®.
58 ALL ABOUT Uconnect® ACCESS Give It A Try! 5. Using the touchscreen, select a restaurant from the list of search results. button on the steering wheel and say 1. Push the 6. Navigate to the location by pressing “Go Now” (if “Launch Yelp®.” equipped with navigation) button on the steering wheel and say 2. Push the “Yelp® Search.” NOTE: Save your destination to Favorites. To find it again go to Nav > Where to > Favorites. 3. Uconnect® will prompt you to say something like, “car wash.
ALL ABOUT Uconnect® ACCESS 59 Action Touchscreen Open Yelp® Apps > All Apps > Yelp® Press inside the #search# field. Using the keypad, type what you are looking for.
60 ALL ABOUT Uconnect® ACCESS Action Find nearest Find nearest Find nearest Find nearest Find nearest Find nearest Find nearest Select a POI Touchscreen Hotels Banks Parking Shopping Drugstores Urgent Care Hospitals Add a Custom Search Category Delete a Custom Category Select Hotels Select Banks Select Parking Select Shopping Select Drugstores Select Urgent Care Select Hospitals Select from the list Press the star to add it Press the star to remove it Voice Command (VR button on steering wheel) H
ALL ABOUT Uconnect® ACCESS 61 Action Touchscreen Sort search results by Best Match, Rating or Distance Route to a POI (if equipped) Call a POI (via Bluetooth®) Press Best Match, Rating, or Distance Press Go Now Press How To Add And Delete Search Categories Voice Command (VR button on steering wheel) – Give It A Try! Press Rating – Press Go Now – Press Requirements Yelp® provides the ability to save cus- • Vehicle must be properly equipped with the tom search catego
62 ALL ABOUT Uconnect® ACCESS • Vehicle must be registered with Uconnect® Access and Safety Information have an active subscription that includes the applicable feature or App. • Vehicle must be powered in the ON/RUN or ACC (Accessory) position with a properly functioning electrical system. • Vehicle must have onboard navigation to use Go Now. • Mobile device must be paired with Bluetooth® and connected to call a POI directly. WARNING! • ALWAYS drive safely with your hands on the steering wheel.
ALL ABOUT Uconnect® ACCESS 63 Tips And Shortcuts • Distance will sort by the closest POI near you. button a • To improve your search results, use single search terms • To bypass the voice prompts hit the second time to barge in and state your desired like “coffee” rather than multiple words, which may command. deliver mixed results, for example, “home improvement and gardening stores.” • To exit Yelp®, press the “X” (close) button in the upper right corner of the touchscreen.
64 ALL ABOUT Uconnect® ACCESS 3. Will Yelp® allow me to make a phone call to my 8. What is the difference between Yelp® and onboard desired search result? Yes. Phone must be paired and navigation? Both experiences are slightly different, connected. but may yield the same results. For example, while both the onboard navigation system and Yelp® con4. How many search results does Yelp® generate at a veniently provide pre-defined search categories, time? Maximum of 20 listings.
ALL ABOUT Uconnect® ACCESS 65 9. Why doesn’t Yelp® recognize my Voice Command search request? To Search Yelp®, Uconnect® must establish a connection to the Yelp® cloud-based service, using the built in 3G connection in your Uconnect® Access system. Be sure to wait until AFTER the beep, before you speak your search request. Your voice command might not be fully captured if there is a misrecognition, resulting in inaccurate results.
66 ALL ABOUT Uconnect® ACCESS Should you receive a notification that your theft alarm 2. Once logged in you will find yourself on the Dashboard. Click on the “Edit Profile” button in the upperhas been set-off, please react with caution. There are a right corner of the page. number of reasons why your alarm may have been triggered, one of which could be that your vehicle was 3. Click on the “Notifications” tab on the left side of the stolen. If so, please see the details of the Stolen Vehicle page.
ALL ABOUT Uconnect® ACCESS 67 7. You’re all set. Should your theft alarm go off, a notification(s) will be sent to the number(s) and/or email(s) you provided. Requirements • Vehicle must be properly equipped with the Uconnect® Access System and a factory installed Theft Alarm system. • Vehicle must be in range of a usable and authorized 3G cellular signal. CAUTION! In the event your theft alarm is activated, use caution and evaluate the situation from a safe distance.
68 ALL ABOUT Uconnect® ACCESS 2. How can I change where I receive notifications? You can manage your notifications by going to the Mopar Owner Connect website (moparownerconnect.com) and log in with your username and password. Once there, you can click on “Edit Profile”, then the “Notifications” tab. 3. Can I receive a text message (SMS) when my Theft Alarm goes off? Yes. Text messages are a convenient and quick way to receive notifications.
ALL ABOUT Uconnect® ACCESS 69 4. Uconnect® Care will work with your local law enforcement to track and attempt to recover the vehicle. 1. If your vehicle is stolen, contact local law enforcement You will be contacted by law enforcement if your as soon as possible. They will work with you to file a vehicle is recovered. While the investigation is ongostolen vehicle report. ing, you should also contact your insurance company 2. Next, inform Uconnect® Care that your vehicle has to inform it of the situation.
70 ALL ABOUT Uconnect® ACCESS Disclaimers that someone is not tracking your vehicle for purposes other than at your request to locate it in the event it is stolen. • No security system is invincible, and vehicle thieves may develop ways to prevent your vehicle from being located. 3. How will I know if my vehicle is recovered? After you provide the Uconnect® Care Agent with the FAQs stolen vehicle report, the agent will work together 1.
ALL ABOUT Uconnect® ACCESS 71 WiFi Hotspot WARNING! Create A 3G WiFi Hotspot For Use In Your Vehicle Description Do Not use the WiFi Hotspot while operating the vehicle. Only use the WiFi Hotspot when it is safe to do so. WiFi Hotspot is on-demand WiFi + 3G • Enables all your passengers to be simultaneously connected to the web. connectivity that’s built-in and ready to go whenever you are. Once your • Connect several devices at one time.
72 ALL ABOUT Uconnect® ACCESS How It Works Give it a Try! The WiFi Hotspot feature provides the vehicle passengers 1. Purchase a subscription to the WiFi Hotspot feature with an internet access hot spot in the vehicle, using the for a day, a week, or a month. You can buy WiFi radio as an access point.
ALL ABOUT Uconnect® ACCESS 73 2
74 ALL ABOUT Uconnect® ACCESS 3. WiFi Hotspot should be turned on after purchasing a subscription. To disable WiFi Hotspot, simply press to uncheck the box to the right of the App (this feature is available while the vehicle is in motion). Optional: Give your hot spot a unique name by pressing Hotspot Name (key pad is not available while vehicle is in motion).
ALL ABOUT Uconnect® ACCESS 75 4. From your in-vehicle touchscreen, select the appropri• Type the network security key (this is called “pass phrase” and is found in Apps > All Apps > WiFi ate in-vehicle network and the desired security level Hotspot > View/Edit Pass phrase) setting. Each security level has different pass phrase constraints. Change the security level setting by select• Click OK ing the checkbox for any of the following security You are now connected! settings.
76 ALL ABOUT Uconnect® ACCESS • Vehicle must be registered with Uconnect® Access and have an active WiFi Hotspot subscription ( WiFi Outpost will be turned off if there is no active subscription). • Vehicle must be in the ON/RUN or ACC (Accessory) position and have a properly operating electrical system for any of the in-vehicle Uconnect® features to function.
ALL ABOUT Uconnect® ACCESS 77 • While the vehicle is in motion it is possible to enable or Tips And Shortcuts disable the WiFi Hotspot. Simply press to check or • Give your WiFi Hotspot a unique name by pressing uncheck the box to the right of the App. “Hotspot Name” within the WiFi Hotspot App. • For your own safety, it is not possible to use some of • To view a list of connected devices, press “View the touchscreen features while the vehicle is in motion.
78 ALL ABOUT Uconnect® ACCESS 4. What if I want to create a custom password for my connection? Select either WPA2/WPA or the WEP 1. How do I know if I have a good signal strength? setting and create a pass phrase by pressing Apps > There is a signal strength indicator on the Apps button All Apps > WiFi Hotspot > View/Edit Pass phrase. of the radio touchscreen. 5. I do not see the connection on my wireless laptop or 2.
ALL ABOUT Uconnect® ACCESS 79 SRT Performance Pages/SRT Performance Pages Plus How It Works From the Radio touchscreen Save And Share Your Best Performance Results With 1. Press the “SRT & Apps” button at the bottom of the The SRT Performance Pages App. (Available Only On screen. SRT Performance Vehicles.) 2. Select the “Information Apps” button on left side of Description screen. The SRT Performance Pages App gives SRT vehicle drivers the tools to become familiar with their vehicle’s 3.
80 ALL ABOUT Uconnect® ACCESS
ALL ABOUT Uconnect® ACCESS 81 5. You can navigate between the Menu item performance button tabs on the left side of screen.
82 ALL ABOUT Uconnect® ACCESS 6. If you chose the Timers tab, you will get an overview of vehicle run time stats. You can view and compare driving performance by choosing between your “Best,” “Last” and “Current” run times. This data can be saved, downloaded and shared.
ALL ABOUT Uconnect® ACCESS 83 2
84 ALL ABOUT Uconnect® ACCESS Downloading Timers Data Choosing the “Save” button on the touchscreen allows you to save your run ticket. Data saved will include date, time stamp, timer data, brake distance and brake speed. If you want to download the Timers information, a message on the ticket on the radio touchscreen will give you three options on where you want to download data: USB, SD Card or Website. NOTE: You will only have the option to download to the Web if you have SRT Performance Pages Plus.
ALL ABOUT Uconnect® ACCESS 85 Once the option to Save is selected, you will receive a confirmation notification. If you selected to save to the website, the URL will be provided where you can view performance data and download the ticket. Only the 10 most recent saved runs will be stored and available on the website, so the oldest run will be overwritten for another if there are already 10. Each saved run will be stored on the website until it is overwritten.
86 ALL ABOUT Uconnect® ACCESS 7. If you chose the G-Force tab, you will see displays of 8. If the Gauges 1 tab is chosen, you will see a display of the vehicle dynamics from G-Force page including vehicle gauges. Information displayed will be the information such as: same as on the instrument cluster such as: • Vehicle Drift Graphic — Vehicle graphic will adjust • Oil Temperature based on vehicle’s movement. • Battery Voltage • Current speed — Same as the instrument cluster.
ALL ABOUT Uconnect® ACCESS 87 9. If the Gauges 2 tab is chosen, you will see a display of vehicle gauges with information such as: • Oil Temperature • Battery Voltage • Oil Pressure • Coolant temperature • Intake Air Temperature 10. If the Engine tab is chosen, you will see a display of real-time engine data that will be the same as displayed on the instrument cluster such as: • Speedometer — Current speed reading. 11.
88 ALL ABOUT Uconnect® ACCESS NOTE: Graphic will represent the owner’s vehicle, e.g. Give It A Try! Viper or Grand Cherokee. 1. Bring the vehicle to a complete stop, but leave vehicle • Vehicle Color Options — Customize the color of the ON for the instrument gauges to be active. vehicle displayed on the home picture. 2. Select the “Apps” button at bottom of radio touch• Accept Button — Saves your selections. screen. 3. Select the “Information Apps” button on left side of radio. 4.
ALL ABOUT Uconnect® ACCESS 89 6. Bring the vehicle to a complete stop after reaching the • Vehicle must be powered in the ON/RUN or ACC target speed or distance. (Accessory) position with a properly functioning electrical system. 7.
90 ALL ABOUT Uconnect® ACCESS • Upon accessing the Timers screen after an ignition FAQs cycle and/or battery disconnect, the driver will see the 1. How do I get SRT Performance Pages? This App is “Best” set of values for all performance indicators, as pre-loaded from the factory. received from the cluster. 2. Do I turn Performance Pages “ON” or “OFF” at any • If accessing Timers screen after an ignition cycle time? No.
ALL ABOUT Uconnect® ACCESS 91 5. What is the difference between SRT Performance 9. What are “Timer Constraints” or criteria that needs to be met to show performance data? Pages and SRT Performance Pages Plus? SRT Performance Pages Plus gives you the additional option to • 0-60 MPH or 0-100 kph ET reached within 10 seconds save performance data to the web. • Distance of 1/4 mile and 1/8 mile • Brake timer when traveling > 30 MPH 6.
92 ALL ABOUT Uconnect® ACCESS UconnectPhone.com. iPhone® and some other smartAdd Free-Form Voice Texts To Your Voice Text Reply phones do not currently support Bluetooth® MAP. Ensure MAP is ON and incoming message notification is Feature enabled. Description How It Works This Voice Texting enhances the Voice Text Reply feature built into your Uconnect® Access 8.4A and 8.4AN radio.
ALL ABOUT Uconnect® ACCESS 93 Follow the steps below to see if your phone can set up to 1. Determine if your phone has been tested to support work with Voice Texting. Bluetooth® “Message Access Profile” (MAP) UconnectPhone.com. (Your phone may support Voice Texting even if not found on this website. Check with your phone manufacturer to see if it supports MAP protocol.) NOTE: If phone supports MAP, then ensure MAP is on and incoming message notification is enabled, (see UconnectPhone.
94 ALL ABOUT Uconnect® ACCESS 5. Select Advanced setting Sending A New Text Message From Radio 6. Ensure Message Access service is on (box checked) 1. Push 7. Select Message Access settings 2. Say “Send text message.” on the steering wheel. 3. The system will respond “Say the phone number or the full name and the phone type of the contact that 9. Hit the back button twice to return to the Bluetooth® you want to send a message to.” settings screen 4. Dictate message (“I will be home at eight.”) 10.
ALL ABOUT Uconnect® ACCESS 95 Dictate A Free-Form Reply To A Message From Radio 4. The system will repeat the message you dictated and (Voice Text Reply) state available commands. If your message was too long, the system will respond with “Your message was 1. Say “Reply to message n” too long. Your message was truncated.” Say “Send,” or n = the number of the message “Start Over” or “Continue.” OR 5.
96 ALL ABOUT Uconnect® ACCESS To Reply To A Message With A Pre-Formatted Re- 3. Select the pre-formatted response by pressing it (“I sponse (Voice Text Reply) can’t talk right now”) 4. Press “Send” Viewing Or Listening To Incoming Messages To Listen to a Message from Radio 1. Push the #Phone# button on the steering wheel. Say $Listen to message$ OR Press the #Listen# button on the touchscreen. NOTE: This function only operates while the vehicle is not in motion. 1. Press “View” next to the message 2.
ALL ABOUT Uconnect® ACCESS 97 Viewing Your Messages 1. Push the “Phone” button on the steering wheel.
98 ALL ABOUT Uconnect® ACCESS 2. Say “View message.” OR Press “View” on the in-vehicle touchscreen. Viewing A Specific Message 1. Press “View” next to the contact name/phone number of the message you want to be displayed. OR Say “Show message n” n = the number of the message Listening To A Message 1. Press “Listen” on the touchscreen or push the “Phone” button on the steering wheel and say “Listen,” the Uconnect® system will read the received text message over the vehicle audio system.
ALL ABOUT Uconnect® ACCESS 99 • Available on vehicles sold in the United States with a Uconnect® 8.4A (sales code RA3) or Uconnect® 8.4AN Barge-in is a feature that enables a user to say a valid (sales code RA4) radio equipped with Uconnect® command without waiting for the system to finish speakAccess. ing. When the system is “speaking” you can push the button on the steering wheel and say a valid com- • Vehicle must be registered with an active Uconnect® mand.
100 ALL ABOUT Uconnect® ACCESS Disclaimers • Not all Voice Texting features may be available on your phone. • Your MAP supported phone must be paired and connected to a compatible Uconnect® radio. • You must have an active cellular connection and be within cellular range to voice text. WARNING! ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect® features and applications in this vehicle.
ALL ABOUT Uconnect® ACCESS 101 2. Can I use voice texting while in my other Chrysler 5. Can a passenger voice text? Yes, however, voice recognition microphones are optimized for the driver, vehicle? The Voice Texting free text response feature is so the system may have difficulty hearing the passenavailable only on Uconnect® 8.4A (sales code RA3) or ger; also, the system will use the currently connected Uconnect® 8.4AN (sales code RA4) radios.
102 ALL ABOUT Uconnect® ACCESS 9. Can I use abbreviations and emoticons? Of course! Remote Door Lock/Unlock Just say the name of the most popular emoticon or Lock Or Unlock Your Vehicle From Virtually Anywhere abbreviation, e.g. smiley, frown, wink, & LOL. Using Your Computer Or Smartphone App. 10. Can I use Text Messaging if the “messaging” button Description doesn’t turn white? Only MAP compatible phones will work with Text Messaging.
ALL ABOUT Uconnect® ACCESS 103 How It Works Uconnect® Access App: 1. Download the Uconnect® Access App to a compatible smartphone and login using your username and password. 2 2. To lock the doors, push the button with the closed lock icon; to unlock the driver’s door push the button with the open lock icon. 3. A pop-up screen will appear asking for your Uconnect® Security PIN (this is the same 4- digit code established when your registered your Uconnect® Access system).
104 ALL ABOUT Uconnect® ACCESS 4. The Uconnect® Access App will confirm if your Mopar® Owner Connect website: command was sent (or not). Press “OK” to close the 1. Log on to the Mopar® Owner Connect website pop-up screen. (moparownerconnect.com) using the username and password you used when registering your Uconnect® 5. It will take a little while for the command to go Access system. through to your vehicle. The time it takes depends on a number of technical conditions.
ALL ABOUT Uconnect® ACCESS 105 Uconnect® Care: 1. If you need to unlock the doors of your vehicle, contact Uconnect® Care by calling 855-792-4241. NOTE: The Uconnect® Care agents are trained to help you with unlocking of your door (for example, in an accidental lock-out). All other Remote Services should be performed via the Mopar® Owner Connect website (moparownerconnect.com) or through the Uconnect® Access App on your compatible smartphone. 4.
106 ALL ABOUT Uconnect® ACCESS 3. After providing your Uconnect® Security PIN, you • Your request will typically take about to 3 minutes to process. If your vehicle has been parked for a while it can ask them to lock or unlock your vehicle. The agent can take up to 30 minutes for the request to reach your will send a command to your vehicle to get the task vehicle and perform the task. done.
ALL ABOUT Uconnect® ACCESS 107 • An ignition cycle is required for some remote com- 3. Will my vehicle be safe if I lose my smartphone? mands such as Remote Vehicle Start and Remote Door People sometimes lose their phone, which is why Lock/Unlock if following a Remote Horn and Lights security measures have been engineered into the activation. Uconnect® Access App. Asking for your username, password and Uconnect® Security PIN help to ensure FAQs that nobody can get into your vehicle if they happen to 1.
108 ALL ABOUT Uconnect® ACCESS to your vehicle. If your smartphone is in an area with • From the Mopar Owner Connect website (moparownerconnect.com). below average coverage, it will take longer to log in and send commands. You can also send a command to turn-off an engine that has been remote started. After 15 minutes if you have not Remote Vehicle Start entered your vehicle with the key, the engine will shut off Use Your Computer Or Smartphone App To Start The automatically.
ALL ABOUT Uconnect® ACCESS 109 2. To start the engine, press the “circular arrow”, to 3. A pop-up screen will appear asking for your turn-off an engine that has been remote started press Uconnect® Security PIN (this is the same 4- digit code the “cancel” button. established when your registered your Uconnect® Access system). Enter the Uconnect® Security PIN on the keypad and press “OK.” 4. The Uconnect® Access App will confirm if your command was sent (or not). Press “OK” to close the pop-up screen. 5.
110 ALL ABOUT Uconnect® ACCESS Mopar Owner Connect website: 1. Log on to the Mopar Owner Connect website (moparownerconnect.com) using the username and password you used when registering your Uconnect® Access system. NOTE: If you forgot your username or password, links are provided on the website to help you retrieve them. 2. If you have more than one vehicle registered into the Mopar Owner Connect website (moparownerconnect.com), select the vehicle you want to send the command by clicking on its image 4.
ALL ABOUT Uconnect® ACCESS 111 Uconnect® Care: Give It A Try! 1. If you need to unlock the doors of your vehicle, • Download the Uconnect® Access App to your smartphone. contact Uconnect® Care by calling 855-792-4241. NOTE: The Uconnect® Care Agents are trained to help • Enter the username and password that you established for the Mopar Owner Connect website you with unlocking of your door (for example, in an (moparownerconnect.com) during registration of accidental lock-out).
112 ALL ABOUT Uconnect® ACCESS Requirements FAQs • Vehicle must be properly equipped with the 1. How long does it take to remote start my vehicle? Depending on various conditions, it can take three Uconnect® Access System and factory installed Reminutes or more for the request to get through to your mote Start capabilities. vehicle, although Uconnect® is always striving to • Vehicle must be in range of a usable and authorized improve performance. cellular signal. 2.
ALL ABOUT Uconnect® ACCESS 113 4. Can someone drive off with my vehicle using the App? No. Driving your vehicle still requires the keys to be in the vehicle. The Remote Start feature simply starts the engine to warm-up or cool down the interior before you arrive, you cannot drive away without the keys. Remote Horn And Lights 5. Can I stop a vehicle that is being driven by canceling the engine start command? No. If a vehicle is driving down the road the cancel Remote Start button will not stop it.
114 ALL ABOUT Uconnect® ACCESS If you want, you can set-up notifications for your account 4. The Uconnect® Access App will confirm if your to receive an email or text (SMS) message every time a command was sent (or not). Press “OK” to close the command is sent to turn on the horn and lights. pop-up screen. How It Works 5. It will take a little while for the command to go through to your vehicle. The time it takes depends on 1.
ALL ABOUT Uconnect® ACCESS 115 2. If you have more than one vehicle registered into the Mopar Owner Connect website (moparownerconnect.com), select the vehicle you want to send the command by clicking on its image along the top. 2 3. Beneath the image of a vehicle like yours, you will see a row of icons. To turn on the horn and lights, press the “trumpet icon.” To turn off the horn and lights, press the “trumpet icon” again.
116 ALL ABOUT Uconnect® ACCESS 5. A message will appear on the screen to let you know Give It A Try! if the command was received by your vehicle. • Download the Uconnect® Access App to your smartUconnect® Care: phone. 1. If you need to unlock the doors of your vehicle, • Enter the username and password that you established contact Uconnect® Care by calling 855-792-4241. for the Mopar Owner Connect website (moparownerconnect.
ALL ABOUT Uconnect® ACCESS 117 Requirements • Vehicle must be properly equipped with the Uconnect® Access System. • Vehicle must be in range of a usable and authorized cellular signal. CAUTION! The Remote Horn and Lights feature is designed to be loud and get noticed. Please keep in mind the surroundings when using this feature. FAQs • Vehicle must be registered with Uconnect® Access and have an active subscription that includes the appli- 1.
118 ALL ABOUT Uconnect® ACCESS Uconnect® Access App. Asking for your username, Via Mobile Apps password and Uconnect® Security PIN help to ensure Pandora® — If Equipped that nobody can access your vehicle if they happen to Pandora® gives people the music and comedy they love find your smartphone. anytime, anywhere. Personalized stations launch in4.
ALL ABOUT Uconnect® ACCESS 119 • Pandora® offers personalized radio based on your How It Works favorite artists, or songs and can create a custom Via Mobile uses the Uconnect® Access smartphone app #station# playing similar music. Custom stations are and your smartphone’s data plan to access your personal created on the Pandora® website or the mobile app. Pandora® account from the vehicle and control it using • Listen to previously created stations in “shuffle” mode the vehicle touchscreen.
120 ALL ABOUT Uconnect® ACCESS If you’ve already registered with Uconnect® Access, log in to moparownerconnect.com to set up your Via Mobile profile. Click on “Via Mobile Profile.” 4. Next, connect your smartphone to the vehicle touchscreen. The Uconnect® Access app is compatible with select iPhone® and Android smartphones. Visit UconnectPhone.com to confirm that your smartphone is compatible with Uconnect®.
ALL ABOUT Uconnect® ACCESS 121 2
122 ALL ABOUT Uconnect® ACCESS Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®. A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content. Press “OK” to continue or the “X” to exit. NOTE: Many smartphones have a limit to how much data they can utilize before incurring additional charges.
ALL ABOUT Uconnect® ACCESS 123 3. To go back and select a different station, press the “Station List” button on the touchscreen. Requirements • Vehicle must be properly equipped with the Uconnect® Access System. • Your smartphone must be compatible with the Uconnect® Access App and properly connected to the vehicle. Give it a try! 1. From the vehicle touchscreen select Pandora® from button on the steering the apps list, or push the wheel and say, “launch Pandora® Via Mobile.” 2.
124 ALL ABOUT Uconnect® ACCESS • Vehicle must be equipped with Uconnect 8.4A/8.4AN. Not available on Uconnect 5.0. Tips and Shortcuts The Uconnect® Access App must be open and you must be logged in. A blue light indicates that it’s providing data to the vehicle. • If you recently changed your password for Pandora®, it may need to be updated on Mopar Owner Connect under the “Via Mobile” section. • Pandora® will launch with the last setting and play list you chose.
ALL ABOUT Uconnect® ACCESS 125 5. Can I customize my Pandora® stations? The 8. How do I block explicit content? Customers have the “Thumbs up” and “Thumbs down” buttons on the ability to block explicit content by adjusting their touchscreen are used to personalize stations based on settings through the Pandora® website at pandora.com or through the Pandora® mobile app. the currently playing track. Give a track the “thumbs up” to hear more tracks with similar qualities, or 9.
126 ALL ABOUT Uconnect® ACCESS iHeartRadio — If Equipped • Launch iHeartRadio using Voice Recognition (VR) or through touchscreen controls. iHeartRadio provides instant access to more than 1,500 live radio stations from across the country and allows • Browse, listen, and save radio stations for easy access. listeners to create custom music stations inspired by their • Browse and create custom stations (e.g. Zac Brown favorite artists or songs. Band).
ALL ABOUT Uconnect® ACCESS 127 3. Next, link app accounts to your Via Mobile profile by entering your login information for apps like iHeartVia Mobile uses the Uconnect® Access smartphone app Radio. and your smartphone’s data plan to access your personal If you’ve already registered with Uconnect® Access, iHeartRadio account from the vehicle and control it using log in to moparownerconnect.com to set up your Via the vehicle touchscreen. A compatible smartphone is Mobile profile.
128 ALL ABOUT Uconnect® ACCESS 5. Launch the Uconnect® Access app on your connected smartphone and log in with your Mopar Owner Connect Username/Email and password. From the vehicle touchscreen press the “Apps” button and select iHeartRadio from the list. iHeartRadio is located within the “All Apps” tab. To launch iHeartRadio using voice recognition, push the button on the steering wheel and say, “launch iHeartRadio Via Mobile.
ALL ABOUT Uconnect® ACCESS 129 2
130 ALL ABOUT Uconnect® ACCESS Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®. A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content. Press “OK” to continue or the “X” to exit. NOTE: Many smartphones have a limit to how much data they can utilize before incurring additional charges.
ALL ABOUT Uconnect® ACCESS 131 Give it a try! 2. The app will launch, presenting you with a convenient interface to use while in your vehicle. You will have four options to select from: • My Stations – Access stations you’ve saved and created. • Stations Near You – Listen to live radio stations broadcasting from your local area. • Live Radio – Displays live radio stations organized by state and city (“Stations by Location”) and genres (“Music” and “Talk Radio.
132 ALL ABOUT Uconnect® ACCESS 5. To find a local, live radio station, return to iHeartRadio Requirements Home and select “Stations Near You.” • Vehicle must be properly equipped with the • Select a station from the list Uconnect® Access System. • Your smartphone must be compatible with the Uconnect® Access App and properly connected to the vehicle. • Your connected smartphone must be in range of a usable cellular signal.
ALL ABOUT Uconnect® ACCESS 133 Tips and Shortcuts FAQs • Continually refine stations to your liking using the 1. Why can’t I get iHeartRadio Via Mobile to work? “Thumbs Up” or “Thumbs Down” buttons. Here are some things to consider: • Check to ensure you have linked your iHeartRadio • Press the “HOLD to Set” button on the top of the account credentials with Uconnect® Access. This is screen for three seconds to add current station as a usually done during registration and setup. Then, preset.
134 ALL ABOUT Uconnect® ACCESS 2. How do I personalize the music played on my 5. Can I create an iHeartRadio account during Uconnect® Access registration and set-up? There is a custom station? Press the “thumbs up” icon when link from the Via Mobile profile page where the music is played that you like, and the “thumbs down” customer can go to iHeartRadio’s website to create a icon when music is played that you do not like. Future new account.
ALL ABOUT Uconnect® ACCESS 135 9. How do I know how much data is being used? • Reduce the need to use your smartphone to access Slacker Radio so you can stay focused on driving. Uconnect® Access Via Mobile uses your smartphone’s existing data plan to stream content. Data usage varies • Launch Slacker Radio using Voice Recognition (VR) or by phone/device, content (e.g. videos), high quality through touchscreen controls. audio and several other factors.
136 ALL ABOUT Uconnect® ACCESS • Listen to customized stations based on your favorite 1. If you have not registered with Uconnect® Access, begin by pressing the “Apps” button on the touchartists and music. screen inside your vehicle, and then press “Uconnect • Continually refine stations to your liking using the Registration.” “Heart,” “Ban Artist” or “Ban Song” controls. 2.
ALL ABOUT Uconnect® ACCESS 137 4. Next, connect your smartphone to the vehicle touchscreen. The Uconnect® Access app is compatible with select iPhone® and Android smartphones. Visit UconnectPhone.com to confirm that your smartphone is compatible with Uconnect®. Once you’ve confirmed your smartphone is compatible, pair it to the vehicle touchscreen via Bluetooth® to use Via Mobile apps. If using an iPhone®, a USB cable may also be supported for the data connection. 5.
138 ALL ABOUT Uconnect® ACCESS
ALL ABOUT Uconnect® ACCESS 139 Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®. A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content. Press “OK” to continue or the “X” to exit. NOTE: Many smartphones have a limit to how much data they can utilize before incurring additional charges.
140 ALL ABOUT Uconnect® ACCESS Your chosen station will play. Use the “Heart” and “Ban” buttons on the touchscreen to quickly and easily customize your experience. Like a song? Heart it to hear it more often. Dislike a song? Ban it and the song or artist will be removed from your station. Slacker Radio makes it easy and personal. Requirements • Vehicle must be properly equipped with the Uconnect® Access System.
ALL ABOUT Uconnect® ACCESS 141 • Vehicle must be powered in the ON/RUN or ACC FAQs (Accessory) position with a properly functioning elec1. Why can’t I get Slacker Radio Via Mobile to work? trical system. Here are some things to consider: • Vehicle must be equipped with Uconnect 8.4A/8.4AN. • Check to ensure you have linked your Slacker Radio Not available on Uconnect 5.0. account credentials with Uconnect® Access. This is usually done during registration and setup.
142 ALL ABOUT Uconnect® ACCESS currently being played. Press the “like” icon to con- 5. Can I create a Slacker Radio account during firm what you want to hear more of, and the “dislike” Uconnect® Access registration and set-up? There is a icon to eliminate what you do not want to hear. link from the Via Mobile profile page where the customer can go to Slacker Radio’s website to create a 3. How do I know when Slacker Radio is playing one new account.
ALL ABOUT Uconnect® ACCESS 143 8. Should I have the Slacker Radio app downloaded to my smartphone to use Uconnect® Access Via Mobile? You do not need to have the Slacker Radio app on your smartphone to use Slacker Radio Via Mobile. However, the Uconnect® Access App is required. Description Aha™ lets you easily access and organize your favorite web content on your phone, then seamlessly integrates the experience with your vehicle. • Listen to audio updates from Facebook® or Twitter® 9.
144 ALL ABOUT Uconnect® ACCESS • Ability to perform location-based local searches (e.g. 1. If you have not yet registered with Uconnect® Access, “Hungry” and “Coffee”) and route to a point of begin by pressing the “Apps” icon on the touchscreen interest by sending the address to the navigation inside your vehicle, then pressing “Uconnect Registrasystem (if nav equipped). tion.” • Real-time traffic reports and audio books (read aloud). 2.
ALL ABOUT Uconnect® ACCESS 145 4. Next, connect your smartphone to the vehicle touchscreen. The Uconnect® Access app is compatible with select iPhone® and Android smartphones. Visit UconnectPhone.com to confirm that your smartphone is compatible with Uconnect. Once you have confirmed your smartphone is compatible, pair it to the vehicle touchscreen via Bluetooth® to use Via Mobile apps. If using an iPhone®, a USB cable may also be supported for the data connection. 5.
146 ALL ABOUT Uconnect® ACCESS
ALL ABOUT Uconnect® ACCESS 147 Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®. A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content. Touch “OK” to continue or the “X” to exit. NOTE: Many smartphones have a limit to how much data they can utilize before incurring additional charges.
148 ALL ABOUT Uconnect® ACCESS within the vehicle, from the Aha™ website, or through the Aha™ mobile app. Some stations may not be available on Aha™. Give it a try! 2. Select an Aha™ station. Your chosen station will play. Refine the content for select stations using the “Like” and “Dislike” buttons on the touchscreens.
ALL ABOUT Uconnect® ACCESS 149 You can associate your Aha™ account with your personal • Vehicle must be powered in the ON/RUN or ACC (Accessory) position with a properly functioning elecFacebook®, Twitter® and Slacker accounts. If you have trical system. the Aha™ app downloaded to your smartphone visit the Aha™ settings screen and look for “Associate Accounts.” • Vehicle must be equipped with Uconnect 8.4A/8.4AN. You can also associate your Aha™ account from Not available on Uconnect 5.0. aharadio.com.
150 ALL ABOUT Uconnect® ACCESS done during registration and setup. Then, check to location of your vehicle. As you drive, the search ensure you have properly connected your compatresults will change to reflect your vehicle’s current ible smartphone to the vehicle touchscreen. The location. Uconnect® Access App must be open and you must 4. How do I sync my Aha™ account with Facebook®, be logged in.
ALL ABOUT Uconnect® ACCESS 151 Uconnect® Access. This is done during registration 10. How do I block explicit content? By default Aha™ automatically filters and blocks explicit content for and setup process. Then, ensure you have properly you. If you would like to enable the ability to listen to connected your compatible smartphone to the vehicle explicit podcasts, as well as comedy or usertouchscreen. The Uconnect® Access App must be generated shouts, you must visit the “Settings” open.
152 ALL ABOUT Uconnect® ACCESS MAINTAIN MY Uconnect® ACCESS ACCOUNT Reinstalling An App From the in-vehicle touchscreen do the following: 1. Press the Uconnect® “App” button and open the Uconnect® Store. Select “My Apps.
ALL ABOUT Uconnect® ACCESS 153 2. In “My Apps,” select “Settings” and then “Reinstall App” and “Continue.
154 ALL ABOUT Uconnect® ACCESS 3. Your Apps have been successfully re-installed.
ALL ABOUT Uconnect® ACCESS 155 How To Remove My Uconnect® Access Account To remove your Uconnect® Access account or cancel your Uconnect® Access subscription, follow the instructions below. You may also go to the Mopar Owner Connect website (moparownerconnect.com). On Mopar Owner Connect, go to Uconnect® Store, and click on “Remove My Vehicle.” For further assistance call Uconnect® Care at 855-7924241. 1. Press the Uconnect® “Apps” button and open the Uconnect® Store. Select “My Apps.
156 ALL ABOUT Uconnect® ACCESS 2. In “My Apps”, select “Settings” and then “Remove Uconnect® Account” and “Continue.
ALL ABOUT Uconnect® ACCESS 157 2
158 ALL ABOUT Uconnect® ACCESS 3. Your Apps have been successfully removed. a Vehicle. Connected vehicles must follow the secure registration process to be added to an account. Uconnect® CARE & FAQs For additional information about Uconnect® Access, push the ASSIST button on the rear view mirror and then select Uconnect® Care on your in-vehicle touchscreen to contact Uconnect® Care. Your call will be directed to a Uconnect® Care agent or held in a queue until an agent is available.
ALL ABOUT Uconnect® ACCESS 159 1. How Do I Register For My Uconnect® Access Ac- 4. What If I Forgot My Uconnect® Security PIN? If count? Press the “Apps” button on the in-vehicle you’ve already registered and forgot your Uconnect® touchscreen, then select Uconnect® Registration. Security PIN, you can reset the pin by selecting Edit Profile on the Mopar Owner Connect website 2. Why Do I Need An Email Address? Without an email (moparownerconnect.
160 ALL ABOUT Uconnect® ACCESS 7. What If I Forgot My Uconnect® Payment PIN? The 10. Can I Try Apps, Features Or Packages Before I Buy Them? Your new vehicle purchase may have come next time you are asked for your Uconnect® Payment with an included trial period for certain Apps and PIN, select “Forgot PIN?” and follow the steps to reset services. For more information please contact it. Uconnect® Care at 855-792-4241. 8.
ALL ABOUT Uconnect® ACCESS 161 14. Will I Be Notified When My Subscription Is Expired Or Will It Automatically Renew? There is no auto-renewal feature currently offered. You can find the expiration dates for all of your App and package subscriptions from your in-vehicle touchscreen, select Apps > All Apps > Uconnect® Store > My Apps. c. Follow the steps to enter your Uconnect® Payment PIN and complete the process. You can also go to the Uconnect® Store online at Mopar Owner Connect (moparownerconnect.
162 ALL ABOUT Uconnect® ACCESS 20. Which Apps Are Included With My Vehicle? Go to 25. Do I Have To Keep My Vehicle On During The App Uconnect® Store > My Apps to see Apps currently Download Process? Yes. available on your vehicle. 26. How Do I Re-Initiate A Download App If There 21. If I Delete/Remove A Package From My Screen, Was An Error? If you’re having issues with an App Does It Cancel My Subscription? Yes, this removes you can reinstall it.
ALL ABOUT Uconnect® ACCESS 163 27. What Should I Do If I Want To Sell My Vehicle? Before your vehicle is sold to a new owner, you’ll want to remove your account information. This process removes all personal information and returns the Uconnect® system to its original factory settings. To remove your account information from the Uconnect® system: 29. I Am Trading My Vehicle In. Can I Transfer Apps To My New Vehicle If I Have An Active Subscription? No.
164 ALL ABOUT Uconnect® ACCESS Safety Guidelines WARNING! ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. • Stop use of the system immediately if a problem occurs. Failure to do so may cause injury or damage to the product.
ALL ABOUT Uconnect® ACCESS 165 NOTE: Many features of this system are speed dependent. For your own safety, it is not possible to use some of the touchscreen features while the vehicle is in motion. isopropyl alcohol and water solution ratio of 50:50. Be sure to follow the solvent manufacturer’s precautions and directions. • Keep drinks, rain, and other sources of moisture away Disc Drive from your system.
166 ALL ABOUT Uconnect® ACCESS Modifications not expressly approved by the radio Increase the separation between the equipment and remanufacturer could void the user’s authority to operate ceiver. the equipment. Consult the dealer or an experienced radio technician for NOTE: This equipment has been tested and found to help. comply with the limits for a Class B digital device, Safety Information pursuant to Part 15 of the FCC Rules.
ALL ABOUT Uconnect® ACCESS 167 DEVICE CONNECTION AND AUDIO TIPS WITH Uconnect® • After all devices are connected/paired, when switching to a different audio source, audio will auto-play from the new source. • More than one phone or device can be paired to your vehicle. The connected device with the highest priority • Current audio (AM/FM/SXM/AUX) will continue to will be used. To transition between devices, Select play when switching to a non-media type App.
168 ALL ABOUT Uconnect® ACCESS • Incoming calls received while entering a nav destination (before pressing “Go”) will cancel the nav entry. The user is required to start over when the phone call has ended.
Uconnect® 8.4A — If Equipped CONTENTS ! Uconnect® 8.4A SYSTEM . . . . . . . . . . . . . . . . .171 ▫ SD Card Mode — If Equipped . . . . . . . . . . . .189 ! RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . .172 ▫ Bluetooth® Mode . . . . . . . . . . . . . . . . . . . . .191 ▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . .175 ! Uconnect® PHONE . . . . . . . . . . . . . . . . . . . . .193 ▫ SiriusXM Satellite Radio Mode — If Equipped. . . . . . . . . . . . . . . . . . . . . . . .
170 Uconnect® 8.4A — If Equipped ▫ General Information . . . . . . . . . . . . . . . . . . .220 ▫ Information. . . . . . . . . . . . . . . . . . . . . . . . . .268 ! NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . .220 ▫ Emergency . . . . . . . . . . . . . . . . . . . . . . . . . .272 ▫ Navigation Registration (Uconnect® 8.4A Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220 ! SECURITY FEATURES . . . . . . . . . . . . . . . . . . .277 ▫ Getting Started . . . . . . . . .
Uconnect® 8.4A — If Equipped 171 Uconnect® 8.4A SYSTEM 2. Media Press the “Media” button on the touchscreen to access media sources such as: Disc, USB Device and AUX as long as the requested media is present. 3. Controls Press the “Controls” button on the touchscreen to customize settings for heated seat and heated steering wheel. Also provides access to the “Settings” screen. 4. Climate Refer to Climate Controls in your vehicles Owner’s Manual for further details. 1. Radio 5.
172 Uconnect® 8.4A — If Equipped 6. Phone 10. SCREEN OFF Press the “Phone” button on the touchscreen to access the Push the SCREEN OFF button to turn the touchscreen OFF. To turn the screen back ON, just press the screen. Uconnect® Phone feature. 7. Apps 11. VOLUME/MUTE Press the “Apps” button on the touchscreen to access Rotate the rotary knob to adjust the Volume. Push the VOLUME/MUTE button to mute the system. Smartphone and Connected vehicle options. 8.
Uconnect® 8.4A — If Equipped 173 VOLUME/MUTE Control Screen Close Push the VOLUME/MUTE control knob to mute the The “X” button on touchscreen, located at the top right, radio. Push the VOLUME/MUTE control knob a second provides a means to close the Direct Tune Screen. The time to unmute the radio. Direct Tune Screen also auto closes if no activity occurs within 10 seconds. The electronic volume control turns continuously (360 degrees) in either direction, without stopping.
174 Uconnect® 8.4A — If Equipped the starting station after passing through the entire band Fast Seek Down two times, the radio will stop at the station where it Press and hold the “Seek Down” button on the began. touchscreen to advance the radio through the available stations or channel at a faster rate, the radio stops at the Fast Seek Up next available station or channel when the button on the Press and hold the “Seek Up” button on the touchtouchscreen is released.
Uconnect® 8.4A — If Equipped 175 When you are receiving a station that you wish to commit into memory, press and hold the desired numYou can backspace an entry by pressing the “Undo” bered button on the touchscreen for more that two button on touchscreen. seconds or until you hear a confirmation beep.
176 Uconnect® 8.4A — If Equipped Scrolling Preset List Return To Main Radio Screen Once in the Browse Presets screen, you can scroll the You can return to the Main Radio Screen, by pressing the preset list by rotation of the TUNE/SCROLL knob, or by “X” button on the touchscreen when in the Browse pressing the “Up and Down” arrow keys, located on the Presets screen. right of the screen.
Uconnect® 8.4A — If Equipped 177 Latino, offering 20 channels of commercial free music, related marks and logos are trademarks of Sirius XM news, talk, comedy, sports and more dedicated to Span- Radio Inc. Service available in Canada; see www.siriusxm.ca. ish language programming. Go to siriusxm.com/getallaccess for more information. SiriusXM services require subscriptions, sold separately after the 12-month trial included with your new vehicle purchase.
178 Uconnect® 8.4A — If Equipped • The SiriusXM function buttons on the touchscreens are displayed below the Program Information. To activate the SiriusXM Satellite Radio subscription, call 1-800-643-2112 for U.S. residents and 1-877-438-9677 for Tuning is done by operating the TUNE/SCROLL knob or Canadian residents. You will need to provide the Sirius by Direct Tune, similar to other Radio Bands, see Presets, ID (RID) located at the bottom of the Channel 0 screen. Browse, TUNE/SCROLL knob and Direct Tune.
Uconnect® 8.4A — If Equipped 179 You can exit by pressing the “Replay” button on the of the content can only be done when the content is touchscreen, any time during the Replay mode. previously rewound, and therefore, can not be done for live content. A continuous press of the “FW” button on Play/Pause the touchscreen also forwards the content.
180 Uconnect® 8.4A — If Equipped The favorites feature enables you to set a favorite artist, or song that is currently playing. The Radio then uses this information to alert you when either the favorite song, or favorite artist are being played at any time by any of the SiriusXM Channels. This Screen contains many sub menus. You can exit a sub menu to return to a parent menu by pressing the “Back Arrow.” All Press the “All” button at the left of the Browse Screen.
Uconnect® 8.4A — If Equipped 181 Presets Deleting A Preset Press the “Presets” button located at the left of the A Preset can be deleted in the Presets Browse screen by Browse screen. pressing the “Trash Can” Icon for the corresponding Preset. You can scroll the Presets list pressing the up and down arrows located at the right side of the screen. Scrolling Favorites can also be done by operating the TUNE/SCROLL Knob Press the “Favorites” button located at the left of the as well. Browse screen.
182 Uconnect® 8.4A — If Equipped Remove Favorites On Air Press the “Remove Favorites” tab at the top of the screen. Press the “Delete All” button on the touchscreen to delete all of the Favorites or press the “Trash Can” icon next to the Favorite to be deleted. Press the “On-Air” tab at the top of the screen. The On-Air list provides a list of Channels currently airing any of the items in the Selections list, and pressing any of the items in the list tunes the radio to that channel.
Uconnect® 8.4A — If Equipped 183 Alert Settings Balance/Fade Press the “Alert Setting” tab at the top of the screen. The Alert Settings menu allows you to choose from “Alert me to on-air games upon start” or “Alert upon score update” or both when one or more of your selections is airing on any of the SiriusXM channels. 3 Audio Press of the “Audio” button on the touchscreen to activate the Audio settings screen to adjust Balance\Fade, Equalizer, and Speed Adjusted Volume.
184 Uconnect® 8.4A — If Equipped Equalizer Speed Adjusted Volume Press the “Equalizer” button on the touchscreen to acti- Press the “Speed Adjusted Volume” button on the touchvate the Equalizer screen. screen to activate the Speed Adjusted Volume screen. Press the “+” or “–” buttons, or by pressing and dragging The Speed Adjusted Volume is adjusted by pressing of over the level bar for each of the equalizer bands.
Uconnect® 8.4A — If Equipped 185 the audio volume with variation to vehicle speed. Vol- A “Insert Disc” message will be displayed on the screen ume increases automatically as speed increase to com- in the Disc mode when a Disc is not present in the Radio. pensate for normal road noise. Seek Up /Down Surround Sound (If Equipped) Press and release the “right arrow” button on the Press the “On” button on the touchscreen to activate touchscreen for the next selection on the Disc.
186 Uconnect® 8.4A — If Equipped shows items and it’s sub-functions, which can be scrolled Info by pressing the “Up” and “Down” buttons to the right. Press the “Info” button on the touchscreen to display the The TUNE/SCROLL knob can also be used to scroll. current track information. Press the “Info” button on the Media Mode touchscreen a second time to cancel this feature. Press the “Media” button on the touchscreen to select the Tracks desired audio source: Disc.
Uconnect® 8.4A — If Equipped 187 contents of the USB device/iPod®. If supported by the device, you can browse by Folders, Artists, Playlists, Overview Albums, Songs, etc. Press the desired button on the left USB/iPod® Mode is entered by either inserting a USB side of the screen. The center of the browse window device or iPod® and cable into the USB Port or press the shows items and it’s sub-functions, which can be scrolled “iPod®” button on the left side of the display.
188 Uconnect® 8.4A — If Equipped the line above and below the track name) and then push Press the “Shuffle” button on the touchscreen to play the the ENTER/BROWSE knob to start playing that track. selections on the USB/iPod® device in random order to Pressing the “trks” button on the touchscreen while the provide an interesting change of pace. Press the “Shuffle” pop up is displayed will close the pop up. button on the touchscreen a second time to turn this Audio feature off.
Uconnect® 8.4A — If Equipped 189 ON and the radio ON, the unit will switch to AUX mode Audio and begin to play when you insert the device cable. Refer to Radio Mode for adjusting the audio settings. Controlling The Auxiliary Device SD Card Mode — If Equipped The control of the auxiliary device (e.g., selecting playOverview lists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead.
190 Uconnect® 8.4A — If Equipped Browse Repeat Press the “Browse” button on the touchscreen to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the SD Card. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Press the desired button on the left side of the screen.
Uconnect® 8.4A — If Equipped 191 Tracks Bluetooth® Mode Press the “trks” button on the touchscreen to display a pop up with the Song List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then push the ENTER/BROWSE knob to start playing that track.
192 Uconnect® 8.4A — If Equipped To access Bluetooth® mode, press the “Bluetooth®” selection, or return to the beginning of the previous selection if the Bluetooth® device is within the first button on the left side of the display. second of the current selection. Source Press the “Select Source” button on the touchscreen to select the desired audio source, USB/iPod®, SD Card, AUX or Bluetooth®. This screen will time out after a few seconds and return to the main radio screen if no selection is made.
Uconnect® 8.4A — If Equipped 193 Audio Refer to Radio Mode for adjusting the audio settings. Uconnect® PHONE Overview • Hands-Free Text Message Reply. (Forward one of 18 pre-defined SMS messages to incoming calls/text messages). • Redialing last dialed numbers (“Redial”). • Calling Back the last incoming call number (“Call Back”). Uconnect® Phone is a voice-activated, hands-free, invehicle communications system.
194 Uconnect® 8.4A — If Equipped Screen Activated Features • Dialing via Keypad using touchscreen. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect® Phone. • Viewing and Calling contacts from Phonebooks disFor Uconnect® customer support: played on the touchscreen. • U.S. residents - visit UconnectPhone.
Uconnect® 8.4A — If Equipped 195 WARNING! Uconnect® Phone Button The Uconnect® Phone button on your steering wheel is used to get into the phone mode and make calls, show recent, incoming, outgoing calls, view phonebook etc., When you press the button you will hear a BEEP. The beep is your signal to give a command. The Uconnect® Phone is driven through your Bluetooth® “Hands-Free Profile” mobile phone.
196 Uconnect® 8.4A — If Equipped The Uconnect® Phone is fully integrated with the vehi- • Prior to giving a voice command, one must wait for the beep, which follows the “Listen” prompt or another cle’s audio system. The volume of the Uconnect® Phone prompt. can be adjusted either from the radio volume control knob or from the steering wheel radio control (right • For certain operations, compound commands can be switch), if so equipped. used.
Uconnect® 8.4A — If Equipped 197 works best when you talk in a normal conversational The system utilizes continuous dialog; when the system tone, as if speaking to someone sitting a few feet/ requires more information from the user it will ask a question to which the user can respond without pushing meters away from you. the “Voice Command” button on your steering Natural Speech wheel. Your Uconnect® Phone Voice system uses a Natural Help Command Language Voice Recognition (VR) engine.
198 Uconnect® 8.4A — If Equipped Cancel Command At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu. or button on your steering You can also push the wheel when the system is listening for a command and be returned to the main or previous menu. Pair (Link) Uconnect® Phone To A Mobile Phone To begin using your Uconnect® Phone, you must pair your compatible Bluetooth® enabled mobile phone.
Uconnect® 8.4A — If Equipped 199 1. Push the “Phone” button on the touchscreen to begin. 5. When the pairing process has successfully completed, the system will prompt you to choose whether or not 2. If there is no phone currently connected with the this is your favorite phone. Selecting “Yes” will make system, a pop-up will appear. this phone the highest priority. This phone will take 3. Select “Yes” to begin the pairing process. Then, search precedence over other paired phones within range.
200 Uconnect® 8.4A — If Equipped 4. Search for available devices on your Bluetooth® enabled mobile phone. When prompted on the phone, 1. Press the “Settings” button on the touchscreen from enter the name and PIN shown on the Uconnect® the Phone main screen, screen, 2. Next, press the “Phone/Bluetooth®” button on the 5. Uconnect® Phone will display an in process screen touchscreen, while the system is connecting, Pair Additional Mobile Phones 6.
Uconnect® 8.4A — If Equipped 201 You can also use the following VR commands to bring up 6. Uconnect® Phone will display an in process screen while the system is connecting, the Paired Phone screen from any screen on the radio: • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth® Streaming Audio Device 1. Press the “Media” button on the touchscreen to begin, 7. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite device.
202 Uconnect® 8.4A — If Equipped Connecting To A Particular Mobile Phone Or Audio Device After Pairing 2. Press the “Paired Phones” or “Paired Audio Devices” button on the touchscreen. Uconnect® Phone will automatically connect to the high- 3. Press the settings icon button located to the right of the est priority paired phone and/or Audio Device within device name. range. If you need to choose a particular phone or Audio 4. The options pop-up will be displayed. Device follow these steps: 5.
Uconnect® 8.4A — If Equipped 203 4. The options pop-up will be displayed. 5. Press the “Delete Device” button on the touchscreen. Phonebook Download (Automatic Phonebook Transfer From Mobile Phone) — If Equipped If equipped and specifically supported by your phone, Uconnect® Phone automatically downloads names (text names) and number entries from the mobile phone’s Making A Phone Or Audio Device A Favorite phonebook. Specific Bluetooth® Phones with Phone 1. Press the “Settings” button on the touchscreen.
204 Uconnect® 8.4A — If Equipped • A maximum of 2000 entries per phone will be down- Managing Your Favorites loaded and updated every time a phone is connected There are three ways you can add an entry to your to the Uconnect® Phone. Favorites. • Depending on the maximum number of entries down- 1. During an active call of a number to make a favorite, loaded, there may be a short delay before the latest press and hold the preset button on the touchscreen on downloaded names can be used.
Uconnect® 8.4A — If Equipped 205 3. From the Phone main screen, select phonebook. From the phonebook screen, select the “Favorites” button on the touchscreen and then select the settings icon button on the touchscreen located to the right of the phonebook record. Select an empty entry and press the settings icon on that selected entry. When the Options pop-up appears, press “Add from Mobile.” You will then be asked which contact and number to choose from your mobile phonebook.
206 Uconnect® 8.4A — If Equipped • Dial by pressing in the number Call By Saying A Phonebook Name • Favorites 2. After the “Listening” prompt and the following beep, say “Call John Doe Mobile.” • Recent Call Log 3. The Uconnect® Phone will dial the number associated with John Doe, or if there are multiple numbers it will ask which number you want to call for John Doe. Dial By Saying A Number Call Controls • Voice Commands (Dial by Saying a Name, Call by 1. Push the “Phone” begin.
Uconnect® 8.4A — If Equipped 207 • Mute/unmute • Transfer the call to/from the phone • Swap two active calls • Join two active calls together Touch-Tone Number Entry 1. Press the “Phone” button on the touchscreen. 2. Press the “Dial” button on the touchscreen. 3. The Touch-Tone screen will be displayed.
208 Uconnect® 8.4A — If Equipped NOTE: The Uconnect® Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can When you receive a call on your mobile phone, the only answer an incoming call or ignore it. Uconnect® Phone will interrupt the vehicle audio sysbutton on the steering wheel Making A Second Call While Current Call Is In tem. Push the “Phone” to accept the call.
Uconnect® 8.4A — If Equipped 209 Toggling Between Calls Redial If two calls are in progress (one active and one on hold), Press the “Redial” button on the touchscreen, or push the and after the “Listening” prompt and press the “Swap” button on the Phone main screen. Only “Phone” button the following beep, say “Redial.” one call can be placed on hold at a time. button to toggle The Uconnect® Phone will call the last number that was You can also press the “Phone” between the active and held phone call.
210 Uconnect® 8.4A — If Equipped Uconnect® Phone Features Voice Mail Calling Roadside Assistance/Towing Assistance To learn how to access your voice mail, refer to “Working with Automated Systems.” If you need roadside/towing assistance: 1. Push the button to begin. Working With Automated Systems This method is used in instances where one generally has 2.
Uconnect® 8.4A — If Equipped 211 if required to enter your PIN followed with a pound, (3 7 • You may not hear all of the tones due to mobile phone network configurations. This is normal. button and say, “Send 3 7 4 4 6 #), you can push the 6 #.
212 Uconnect® 8.4A — If Equipped Voice Response Length It is possible for you to choose between Brief and Detailed Voice Response Length. 1. Press the “More” button on the touchscreen (where available), then press the “Settings” button on the touchscreen. 2. Press the “Display” button on the touchscreen, then scroll down to Voice Response Length. 3. Select either “Brief” or “Detailed” by pressing the box next to the selection. A check-mark will appear to indicate your selection.
Uconnect® 8.4A — If Equipped 213 dialing a number with your connected Bluetooth® mobile phone, the audio will be played through your vehicle’s audio system. The Uconnect® Phone will work the same as if you dial the number using voice a command. Advanced Phone Connectivity Transfer Call To And From Mobile Phone The Uconnect® Phone allows ongoing calls to be transferred from your mobile phone to the Uconnect® Phone without terminating the call.
214 Uconnect® 8.4A — If Equipped Things You Should Know About Your Uconnect® Phone Voice Command • Low Road Noise • Smooth Road Surface • Fully Closed Windows • For best performance, adjust the rearview mirror to • Dry Weather Condition provide at least ½ inch (1 cm) gap between the overhead console (if equipped) and the mirror. Even though the system is designed for many languages and accents, the system may not always work for some. • Always wait for the beep before speaking.
Uconnect® 8.4A — If Equipped 215 Even though international dialing for most number com- Performance such as audio clarity, echo, and loudness to binations is supported, some shortcut dialing number a large degree rely on the phone and network, and not the Uconnect® Phone. combinations may not be supported. Audio quality is maximized under: Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume.
216 Uconnect® 8.4A — If Equipped “help”). Uconnect® will then read the pre-defined messages allowed. As soon as you hear the message you would like to send, you can interrupt the list of prompts by pushing the “Uconnect® Phone” button and saying the phrase. Uconnect® will confirm the message by and Here’s how: Push the “Uconnect® Phone” button reading it back to you. Then push the “Uconnect® wait for the beep, then say “reply.” Uconnect® will give Phone” button and say “Send.
Uconnect® 8.4A — If Equipped 217 Voice Texting Reply and Voice Texting features require a compatible mobile device enabled with Bluetooth® Message Access Profile (MAP). Some smartphones do not currently support Bluetooth® MAP. Visit UconnectPhone.com for system and device compatibility. Voice Texting (Must Be Registered With Uconnect® Access And Have A Current Subscription, U.S. Residents Only) WARNING! ALWAYS drive safely and obey all applicable laws.
218 Uconnect® 8.4A — If Equipped 3. Accept the Allow MAP profile request on your smart 6. Uconnect® will prompt you “Please say the message phone. (Please refer to device manufacturer instructhat you would like to send” (If you do not hear this tions for details). prompt, you may not have an active subscription with Uconnect® Access). To Send A Text Message: 7. Wait for the beep, and then dictate any message up to 1. Push the Uconnect® Phone button, 140 characters.
Uconnect® 8.
220 Uconnect® 8.4A — If Equipped Bluetooth® Communication Link • This device may not cause harmful interference. Mobile phones have been found to lose connection to the • This device must accept any interference received, Uconnect® Phone. When this happens, the connection including interference that may cause undesired opcan generally be re-established by switching the mobile eration. phone OFF/ON. Your mobile phone is recommended to NAVIGATION remain in Bluetooth® ON mode.
Uconnect® 8.4A — If Equipped 221 Main Menu • Press “Emergency” to search for Hospitals, Police and Fire Stations near your current location. You can also display your current location and save any Emergency facility location to your Favorites. • Press “Stop” to stop a route. • Press “Detour” to detour a route. • Press “Where To?” to find or route to a destination. • Press “View Map” to view the map. • Press “Information” to view Traffic, Where Am I? and Trip Computer information.
222 Uconnect® 8.4A — If Equipped Where To? Address Press this button on the touchscreen to search by a street address or a street name with house number. Recent Press this button on the touchscreen to access previously routed addresses or locations. Point of Interest Press this button on the touchscreen when you want to route to a point of interest. The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI).
Uconnect® 8.4A — If Equipped 223 Intersection Point on Map Press this button on the touchscreen to enter in two street Press this button on the touchscreen to select a destinanames as a destination. tion directly from the Map screen. By selecting a street segment or icon, you can quickly enter a destination Go Home without the need to input the city name or street. Press this button on the touchscreen to program or City Center confirm a route to the saved home address.
224 Uconnect® 8.4A — If Equipped Closest City Where To? — Address Press this button on the touchscreen to route to a nearby To enter a destination by Address, follow these steps: city. The screen will display an alphabetical listing of 1. While in the Nav Main Menu, press the “Where To?” nearby cities. The navigation system will calculate a route button on the touchscreen, then press the “Address” with the destination at the center of the nearby city. button on the touchscreen.
Uconnect® 8.4A — If Equipped 225 2. Press “Spell City” or “Spell Street” to begin entering the address of your destination. If you press “Spell Street,” you will have to enter and select/press the desired street name in the correct city and then you will have to enter the house number. To change the state and/or country, press the “state, country” button on the touchscreen and follow the prompts to change the state and/or country.
226 Uconnect® 8.4A — If Equipped Once the correct City, Street and Number has been If you are currently on a route guidance and you select entered, you will be asked to confirm your destination Recent, the system will ask you to choose one of the by pressing “OK.” following: 3. Press the “Yes” button on the touchscreen to confirm • Cancel previous route your destination and begin your route.
Uconnect® 8.4A — If Equipped 227 Where To? — Recent To route to a Recent destination, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Recent” button on the touchscreen. 2. Press the button on the touchscreen with the name of the desired destination.
228 Uconnect® 8.4A — If Equipped 3. Confirm the route with “Yes” to start the route guid- The following Options are available for each destination: ance. • Edit Name To delete a destination from the list, press the “Trash • Add Phone Number Can Icon” button on the touchscreen. To display the options for a destination press the • Move Up in the list “Options” button on the touchscreen that looks like a • Move Down in the list gear.
Uconnect® 8.4A — If Equipped 229 Where To? — Point of Interest You have the following POIs to choose from: To enter a destination by Point of Interest (POI), press the • Gas Stations “Where To?” button from the Nav Main Menu, then press • Restaurants the “Point of Interest” button on the touchscreen. • Hotels/Motels • ATM/Banking • All POIs • Spell POI Name The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI)s.
230 Uconnect® 8.4A — If Equipped • Near Destination (only available during route guidance) • Along Route (only available during route guidance) You can also change your POI search area, by pressing the “Change Search Area” button on the touchscreen. You will have the following options to change your search area: • Around Me • In a City NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
Uconnect® 8.4A — If Equipped 231 POI — Gas Stations 2. Press the “Gas Stations” button on the touchscreen. To select a Gas Station POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen.
232 Uconnect® 8.4A — If Equipped You can search for a gas station by the following categories, which are button tabs at the top of the screen. • Name • Distance • Type • ABC (Search) 3. Press the desired Gas Station and press “Yes” to confirm the destination.
Uconnect® 8.4A — If Equipped 233 POI — Restaurants 2. Press the “Restaurants” button on the touchscreen. To select a Restaurant POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 3 You can search for a restaurants by the following categories, which are button tabs at the top of the screen.
234 Uconnect® 8.4A — If Equipped 3. Press the desired Restaurant and press “Yes” to con- POI — Hotels/Motels firm the destination. To select a Hotel or Motel POI, follow these steps: If you are currently on a route guidance and you select a 1. While in the Nav Main Menu, press the “Where To?” Restaurant, the system will ask you to choose one of the button on the touchscreen, press the “Point of Interest” following: button on the touchscreen.
Uconnect® 8.4A — If Equipped 235 2. Press the “Hotels/Motels” button on the touchscreen. • Type • ABC (Search) 3. Press the desired hotel or motel and press “Yes” to confirm the destination.
236 Uconnect® 8.4A — If Equipped POI — ATM/Banking To select a ATM or Bank POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 2. Press the “ATM/Banking” button on the touchscreen. You can search for an ATM or Bank by the following categories, which are button tabs at the top of the screen.
Uconnect® 8.4A — If Equipped 237 3. Press the desired ATM or Bank and press “Yes” to All POIs confirm the destination. To select a POI type, follow these steps: If you are currently on a route guidance and you select an 1. While in the Nav Main Menu, press the “Where To?” ATM or Bank POI, the system will ask you to choose one button on the touchscreen, then press the “Point of of the following: Interest” button on the touchscreen.
238 Uconnect® 8.4A — If Equipped 2. Press “All POIs” button on the touchscreen. You can search through the available POI categories to find your desired POI.
Uconnect® 8.4A — If Equipped 239 If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. 3. Select a category and then select a subcategory if necessary.
240 Uconnect® 8.4A — If Equipped POI — Spell Name To select for a specific POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 3. A keyboard will appear on the screen. Type in the POI that you want to search and press the “List” button on the touchscreen to display available items. 4. Press the desired POI and press “Yes” to confirm the destination. 2.
Uconnect® 8.4A — If Equipped 241 If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination 3 • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — Favorite Destinations To route to a Favorite destination, follow these steps: 2.
242 Uconnect® 8.4A — If Equipped 4. To save a favorite destination, press the “Add Favor- If you are currently on a route guidance and you select a ite” button on the touchscreen and follow the steps to Favorite, the system will ask you to choose one of the route a destination. following: 5. To display the options for a favorite destination press • Cancel previous route the “Options” button on the touchscreen that looks • Add as first destination like a gear.
Uconnect® 8.4A — If Equipped 243 2. Press the “Spell Intersection” button on the touchscreen. To enter a destination by Intersection, follow these steps: Where To? — Intersection 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Intersection” button on the touchscreen. 3 This menu shows the default country and state setting.
244 Uconnect® 8.4A — If Equipped 3. If you press “Spell City,” enter and press the desired 4. Once the correct City and Intersection has been encity name, followed by the desired street name, then tered, you will be asked to confirm your destination. enter the intersection street. 5. Press the “Yes” button on the touchscreen to confirm If you press “Spell Street,” enter and press the desired your destination and begin your route.
Uconnect® 8.4A — If Equipped 245 Where To? — Go Home 2. To set your set your Home Address choose one of the following options: To enter your Home Address, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” NOTE: Refer to the individual section of the chosen button on the touchscreen then press the “Go Home” option for further information. button on the touchscreen.
246 Uconnect® 8.4A — If Equipped 3. Press the “Save” button on the touchscreen to confirm 3. Press “Clear Home” and then press “Yes” to clear/ your destination and begin the route to your Home delete your Home Address. Address. 4. To enter in a new Home Address, follow the Where 4. This address will be saved as your Home Address and To? – Go Home procedure. it can be accessed by pressing the “Go Home” button NOTE: You can press the “back arrow” button on the in the Where To? Menu.
Uconnect® 8.4A — If Equipped 247 Where To? — Trips 2. Press the “Trips” button on the touchscreen. To route to a saved Trip, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Recent” button on the touchscreen. 3 3. Press the button on the touchscreen with the name of the desired Trip and press the first destination in the list. 4. Confirm the route by pressing “Yes” to start the route guidance.
248 Uconnect® 8.4A — If Equipped To add a Trip, follow these steps: 1. Press the “Create new Trip” button on the touchscreen. 2. Type in the new Trip Name. • City Center • Closest Cities • Phone Number NOTE: Refer to the individual section of the chosen 3. Press “Add Destination” to add destinations to your option for further information. trip. 5. Add more needed destinations to your trip. 4.
Uconnect® 8.4A — If Equipped 249 The following Options are available for each trip: Where To? — GEO Coordinate • Edit Name To route to a saved Trip, follow these steps: • Move Up in the list • Move Down in the list NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “GEO Coordinate” button on the touchscreen.
250 Uconnect® 8.4A — If Equipped 2. Enter the Latitude by typing in the numbers. Use the 4. Enter the Longitude by typing in the numbers. Use the left and right arrows to select specific numbers in the left and right arrows to select specific numbers in the location shown. location shown. 5. Press “OK” to confirm the destination. 6. Press the “Yes” button on the touchscreen to confirm your destination and begin your route.
Uconnect® 8.4A — If Equipped 251 2. Use the touchscreen to drag the center of the cross over the desired destination. To enter a destination by Point on Map, follow these steps: Where To? — Point on Map 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Point on Map” button on the touchscreen. 3 3.
252 Uconnect® 8.4A — If Equipped 4. Press the “Yes” button on the touchscreen to confirm Where To? — City Center your destination and begin your route. To enter a destination by City Center, follow these steps: If you are currently on a route guidance and you select a 1. While in the Nav Main Menu, press the “Where To?” Point on Map, the system will ask you to choose one of button on the touchscreen then press the “City Center” the following: button on the touchscreen.
Uconnect® 8.4A — If Equipped 253 If you are currently on a route guidance and you select a City Center, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. 3. Press the desired city from the list. 4.
254 Uconnect® 8.4A — If Equipped Where To? — Closest City 2. Press the desired city from the list. To enter a destination by Closest City, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Closest City” button on the touchscreen. 3. Press the “Yes” button on the touchscreen to confirm your destination and begin your route.
Uconnect® 8.4A — If Equipped 255 If you are currently on a route guidance and you select a Closest City, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — Trails 2. Press “Start Trail Recording.” When starting to drive a trail you want to record, follow 3.
256 Uconnect® 8.4A — If Equipped 2. Enter the Phone Number of the destination you would like to route to. To enter a destination by Phone number, follow these steps: 3. Press the desired destination from the list. Where To? — Phone 1. While in the Nav Main Menu, press the “Where To?” 4. Press the “Yes” button on the touchscreen to confirm button on the touchscreen then press the “Phone your destination and begin your route. Number” button on the touchscreen.
Uconnect® 8.4A — If Equipped 257 Before Route Guidance Before confirming the route with the “Yes” button on the touchscreen, it is possible to select options different from the default route settings. • Options – Press the “Options” button on the touchscreen to display a list of options to alter your route. To make a selection press and release the desired setting until a check-mark appears.
258 Uconnect® 8.4A — If Equipped • Avoid – Press the “Avoid” button on the touchscreen • Save – Press the “Save” button on the touchscreen to to choose road types to avoid during your route. To save the destination as a Favorite. make a selection press and release the desired setting Press the “Yes” button on the touchscreen to confirm until a check-mark appears. your destination and to start your route guidance.
Uconnect® 8.4A — If Equipped 259 Menu Press the “View Map” button on the touchscreen from the Press this button on the touchscreen to return to the Nav Nav Main Menu to display a map of your current Main Menu. position. Zoom In +/ Zoom Out – View Map Press the Zoom In (+) or Zoom Out (–) buttons on the touchscreen to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels. (E.g. residential streets, lightly-traveled county roads.
260 Uconnect® 8.4A — If Equipped • Settings Press the area in the upper center part of the screen that Press this button on the touchscreen to view all the displays your next turn to see a Turn List for your current available settings. See View Map – Settings for more information. route. • Repeat Press a turn in the displayed Turn List for the following Press this button on the touchscreen to repeat the current options: voice prompt.
Uconnect® 8.4A — If Equipped 261 Where Am I? Press the area in the lower center part of the screen that displays your current location to view the Where Am I? view. Where Am I? displays the address and GEO Coordinates of your current location. 3 • Press the “GPS” button on the touchscreen to view the GPS information. • Press the “Save” button on the touchscreen to save the location in your Favorites.
262 Uconnect® 8.4A — If Equipped View Map — Settings The following Map Settings are available: • Map Setup — Press this button on the touchscreen to display items to customize how your map is viewed. Settings – Map Setup for more information. • Speed Limit — Press this button on the touchscreen to turn on/off speed limit warning announcements and to enter a pre-defined speed limit for your route. • Guidance Options — Press this button on the touchscreen to display items to customize your route guidance.
Uconnect® 8.4A — If Equipped 263 • GPS — Press this button on the touchscreen to change the GPS display. Press the desired button on the touchscreen. • Decimal • DMS • DM Copy device information to USB? (If Equipped) — Press this button on the touchscreen to copy your radio information to a USB jump drive through the available USB port.
264 Uconnect® 8.4A — If Equipped • Current Street Press this button on the touchscreen to turn on/off the current street display on the lower center of the Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. • AutoZoom Press this button on the touchscreen to change how the AutoZoom feature adjust the zoom level during guidance in Map View. Press the desired button on the touchscreen.
Uconnect® 8.4A — If Equipped 265 • Show POI Icons • Park Areas • POI Icon List • Railroads Press this button on the touchscreen to show the selected Point of Interest icons while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. Press this button on the touchscreen to display the available Point of Interest icons you would like displayed while in Map View.
266 Uconnect® 8.4A — If Equipped • River Names Press this button on the touchscreen to display River Names while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. The following Guidance options are available. • Play Voice Guidance Prompts Press this button on the touchscreen to enable Voice Guidance Prompts during route guidance.
Uconnect® 8.4A — If Equipped 267 • Junction View Manual Off Press this button on the touchscreen to enable Junction View during route guidance. Press and release the button • TMC Avoidance Types (IF Equipped) on the touchscreen until a check-mark appears, showing Press this button on the touchscreen to display the the setting has been selected. available Traffic Message Channel (TMC) Avoidance • Navigation Turn-by-Turn Displayed In Cluster Types you would like displayed while in route guidance.
268 Uconnect® 8.4A — If Equipped Information From the Nav Main Menu, press the “Information” button on the touchscreen and select one of the following options to view additional information. • Traffic • Where Am I? • Trip Computer NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
Uconnect® 8.4A — If Equipped 269 Information — Where Am I? 2. Press the “Where Am I?” button on the touchscreen. To select “Where Am I?” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen. 3 Where Am I? displays the address and GEO Coordinates of your current location. 3. Press the “GPS” button on the touchscreen to view the GPS information.
270 Uconnect® 8.4A — If Equipped 4. Press the “Save” button on the touchscreen to save the location in your Favorites. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information — Trip Computer To select “Trip Computer” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen.
Uconnect® 8.4A — If Equipped 271 2. Press the “Trip Computer” button on the touchscreen. • Overall average speed • Moving average speed • Maximum speed reached • Total time traveled • Travel time spent moving • Travel time spent stopped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the ‘X’ button on the touchscreen to exit.
272 Uconnect® 8.4A — If Equipped Emergency From the Nav Main Menu, press the “Emergency” button on the touchscreen and press one of the following options to search and route to a specific location.
Uconnect® 8.4A — If Equipped 273 Emergency — Hospital 2. Press the “Hospital” button on the touchscreen. To search for a Hospital close to your current location, follow these steps: 1. While in the Nav Main Menu, press the “Emergency” button on the touchscreen. 3 You can search for a Hospital by the following categories, which are button tabs at the top of the screen.
274 Uconnect® 8.4A — If Equipped NOTE: In case of emergency, please contact the facility to Emergency — Police verify their availability before proceeding. To search for a Police Station close to your current 3. Press the desired Hospital and press “Yes” to confirm location, follow these steps: the destination. 1.
Uconnect® 8.4A — If Equipped 275 2. Press the “Police” button on the touchscreen. NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. 3. Press the desired Police Station and press “Yes” to confirm the destination.
276 Uconnect® 8.4A — If Equipped 2. Press the “Fire Department” button on the touchscreen. To search for a Fire Departmentclose to your current location, follow these steps: Emergency — Fire Department 1. While in the Nav Main Menu, press the “Emergency” button on the touchscreen. You can search for a Fire Department by the following categories, which are button tabs at the top of the screen.
Uconnect® 8.4A — If Equipped 277 NOTE: In case of emergency, please contact the facility to SECURITY FEATURES verify their availability before proceeding. The following Security Related options are available: 3. Press the desired Fire Department and press “Yes” to • 9–1–1 Call confirm the destination.
278 Uconnect® 8.4A — If Equipped conversations are initiated through the Uconnect® Services in your vehicle, or via a landline or mobile telephone, and may share information obtained through such recording and monitoring in accordance with regulatory requirements. You acknowledge, agree and consent to any recording, monitoring or sharing of information obtained through any such call recordings.
Uconnect® 8.4A — If Equipped 279 4. You should be able to speak with the 9-1-1 operator 6. If a connection between the vehicle and a 9-1-1 operathrough the vehicle audio system to determine if tor is made, the 9-1-1 Call system may transmit certain additional help is needed. vehicle information to a 9-1-1 operator, including the last known GPS coordinates of your vehicle.
280 Uconnect® 8.4A — If Equipped WARNING! If anyone in the vehicle could be in danger (e.g., fire or smoke is visible, dangerous road conditions or location), do not wait for voice contact from a 9-1-1 operator. All occupants should exit the vehicle immediately and move to a safe location. WARNING! Do not add any aftermarket electrical equipment to the vehicle’s electrical system. This may prevent your vehicle from sending a signal to initiate an emergency call.
Uconnect® 8.4A — If Equipped 281 WARNING! • Ignoring the Rearview Mirror light could mean you may not have 9-1-1 Call capability if needed. If the Rearview Mirror light is illuminated, have an authorized dealer service the 9-1-1 Call system immediately. • The Occupant Restraint Controller (ORC) turns on the Air Bag Warning Light on the instrument panel if a malfunction is detected in any part of the air bag system.
282 Uconnect® 8.4A — If Equipped • Operator error by the 9-1-1 operator. • Wireless network congestion. • Weather. • Buildings, structures, geographic terrain, or tunnels. WARNING! Never place anything on or near the vehicle’s wireless and GPS antennas. You could prevent wireless and GPS signal reception, which can prevent your vehicle from placing an emergency call. Wireless and GPS signal reception is required for the 9-1-1 Call system to function properly.
Uconnect® 8.4AN — If Equipped CONTENTS ! Uconnect® 8.4AN SYSTEM . . . . . . . . . . . . . . . .285 ▫ SD Card Mode — If Equipped . . . . . . . . . . . .304 ! RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . .286 ▫ Bluetooth® Mode . . . . . . . . . . . . . . . . . . . . .306 ▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . .289 ! Uconnect® PHONE . . . . . . . . . . . . . . . . . . . . .308 ▫ SiriusXM Satellite Radio Mode — If Equipped. . . . . . . . . . . . . . . . . . . . . . . .
284 Uconnect® 8.4AN — If Equipped ! NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . .333 ▫ Getting Started . . . . . . . . . . . . . . . . . . . . . . .333 ▫ Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . .333 ▫ Where To?. . . . . . . . . . . . . . . . . . . . . . . . . . .334 ▫ View Map . . . . . . . . . . . . . . . . . . . . . . . . . . .371 ▫ View Map — Settings. . . . . . . . . . . . . . . . . . .374 ▫ Information. . . . . . . . . . . . . . . . . . . . . . . . . .
Uconnect® 8.4AN — If Equipped 285 Uconnect® 8.4AN SYSTEM 2. Media Press the “Media” button on the touchscreen to access media sources such as: Disc (If Equipped), USB Device, AUX, Bluetooth®, and SD Card (If Equipped) as long as the requested media is present. 3. Controls Press the #Controls# button on the touchscreen to adjust the auto-dimming mirror, heated & vented seats, heated & vented steering wheel (if equipped). 4. Climate 1.
286 Uconnect® 8.4AN — If Equipped 6. Phone 10. SCREEN OFF Press the “Phone” button on the touchscreen to access the Push the SCREEN OFF button to turn the touchscreen Uconnect® Phone feature. OFF. To turn the screen back ON, just press the screen. 7. Apps 11. VOLUME/MUTE Press the “Apps” button on the touchscreen to access Rotate the rotary knob to adjust the Volume. Push the Smartphone and Connected vehicle options. VOLUME/MUTE button to mute the system. 8. ENTER/BROWSE & TUNE/SCROLL 12.
Uconnect® 8.4AN — If Equipped 287 Press the RADIO button on the touchscreen, bottom left corner, to enter the Radio Mode. The different tuner modes; AM, FM, and SXM, can then, be selected by pressing the corresponding buttons in the Radio mode. Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection.
288 Uconnect® 8.4AN — If Equipped or channels at a faster rate, the radio stops at the next available station or channel when the button on the The Seek Up and Down functions are activated by touchscreen is released. pressing the double arrow buttons on the touchscreen to the right and left of the radio station display, or by Seek Down pressing the left “Steering Wheel Audio Control” (if Press and release the “Seek Down” button on the equipped) up or down.
Uconnect® 8.4AN — If Equipped 289 Direct Tune GO Press the “Tune” button on the touchscreen located at the bottom of the radio screen. The Direct Tune button on the touchscreen is available in AM, FM and SXM radio modes and can be used to direct tune the radio to a desired station or channel. Once the last digit of a station has been entered, the DIRECT TUNE screen will close and the system will automatically tune to that station.
290 Uconnect® 8.4AN — If Equipped You can switch between the two radio presets by pressing When selected, the radio tunes to the station stored in the the “arrow button” located in the upper right of the radio Preset and returns to the main radio screen. touchscreen.
Uconnect® 8.4AN — If Equipped 291 SiriusXM All Access Package • MySXM – allowing you to personalize your favorite music channels All satellite radio equipped vehicles come with a one year trial to the SiriusXM All Access package, providing Go to siriusxm.com/getallaccess for more information over 160 channels of the best programming for all the SiriusXM services require subscriptions, sold separately places life takes you.
292 Uconnect® 8.4AN — If Equipped This functionality is only available for radios equipped Canadian residents. You will need to provide the with a Satellite receiver. In order to receive satellite radio, SiriusXM ID (RID) located at the bottom of the Channel the vehicle needs to be outside with a clear view to the 0 screen. sky. The Satellite Mode is activated by a press of the “SXM” If the screen shows Acquiring Signal, you might have to button on the touchscreen.
Uconnect® 8.4AN — If Equipped 293 Tuning is done by operating the Tune Knob or by Direct Play/Pause Tune, similar to other Radio Bands, see Presets, browse, Press the “Pause/Play” button on the touchscreen to Tune Knob, and Direct Tune. pause the playing of live or rewound content at any time. In addition to the tuning Operation functions common to Play can be resumed again by pressing of the “Pause/ all Radio modes, the replay, Traffic/Weather Jump, and Play” button on the touchscreen.
294 Uconnect® 8.4AN — If Equipped the touchscreen also forwards the content. The Radio The maximum number of favorites that can be stored in begins playing the content at the point at which the press the Radio is 50. is release. Fav. Artist: While the song is playing to set a Favorite Artist, press the “fav.” button on the touchscreen and Live then the Fav. Artist button on the touchscreen. Press the “Live” button on the touchscreen to resume Fav.
Uconnect® 8.4AN — If Equipped 295 If the Traffic & Weather alert City is not set, you are list by pressing the “Up and Down arrows”, located on presented with a pop up to allow you to select the the right side of the screen. Scrolling can also be done by operating the TUNE/SCROLL knob. favorite city using the Browse Screen.
296 Uconnect® 8.4AN — If Equipped The Favorites menu provides a means to Edit the Favorites list and to configure the Alert Settings, along with A Preset can be selected by pressing any of the listed providing a list of Channels currently airing any of the “Presets”, or by pushing the ENTER/BROWSE button on items in the Favorites list. the TUNE/SCROLL knob to select the currently highlighted Preset.
Uconnect® 8.4AN — If Equipped 297 alert or Audible and Visual alert when one of your then you can select a team by pressing the corresponding favorites is airing on any of the SiriusXM channels. box. A check mark appears for all teams that are chosen. Game Zone Remove Selection Press the “Game Zone” button, located at the left of the Press the “Remove Selection” tab at the top of the screen. Browse screen.
298 Uconnect® 8.4AN — If Equipped Audio Balance/Fade Press the “audio” button on the touchscreen to activate the audio settings screen to adjust Balance\Fade, Equalizer and Speed Adjusted Volume. You can return to the Radio screen by pressing the “X” located at the top right. Press the “Balance/Fade” button on the touchscreen to Balance audio between the front speakers or fade the audio between the rear and front speakers.
Uconnect® 8.4AN — If Equipped 299 Equalizer Speed Adjusted Volume 4 Press the “Equalizer” button on the touchscreen to acti- Press the “Speed Adjusted Volume” button on the touchvate the Equalizer screen. screen to activate the Speed Adjusted Volume screen. Press the “+” or “–” buttons on the touchscreen, or by The Speed Adjusted Volume is adjusted by pressing of pressing and dragging over the “Level Bar” for each of the “+ and –” buttons or by pressing and dragging over the equalizer bands.
300 Uconnect® 8.4AN — If Equipped the audio volume with variation to vehicle speed. Vol- A “Insert Disc” message will be displayed on the screen ume increases automatically as speed increase to com- in the Disc mode when a Disc is not present in the Radio. pensate for normal road noise. Seek Up /Down Surround System — If Equipped Press and release the “right arrow” button on the Press the “On” button on the touchscreen to activate touchscreen for the next selection on the Disc.
Uconnect® 8.4AN — If Equipped 301 shows items and it’s sub-functions, which can be scrolled Info by pressing the “Up” and “Down” buttons to the right. Press the “Info” button on the touchscreen to display the The TUNE/SCROLL knob can also be used to scroll. current track information. Press the “Info” button on the Media Mode touchscreen a second time to cancel this feature. Press the “Media” button on the touchscreen to select the Tracks desired audio source: Disc.
302 Uconnect® 8.4AN — If Equipped contents of the USB device/iPod®. If supported by the device, you can browse by Folders, Artists, Playlists, Overview Albums, Songs, etc. Press the desired button on the left USB/iPod® Mode is entered by either inserting a USB side of the screen. The center of the browse window device or iPod® and cable into the USB Port or press the shows items and it’s sub-functions, which can be scrolled “iPod®” button on the left side of the display.
Uconnect® 8.4AN — If Equipped 303 the line above and below the track name) and then push Press the “Shuffle” button on the touchscreen to play the the ENTER/BROWSE knob to start playing that track. selections on the USB/iPod® device in random order to Pressing the “trks” button on the touchscreen while the provide an interesting change of pace. Press the “Shuffle” pop up is displayed will close the pop up. button on the touchscreen a second time to turn this Audio feature off.
304 Uconnect® 8.4AN — If Equipped ON and the radio ON, the unit will switch to AUX mode Audio and begin to play when you insert the device cable. Refer to Radio Mode for adjusting the audio settings. Controlling The Auxiliary Device SD Card Mode — If Equipped The control of the auxiliary device (e.g., selecting playOverview lists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead.
Uconnect® 8.4AN — If Equipped 305 Browse Repeat Press the “Browse” button on the touchscreen to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the SD Card. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Press the desired button on the left side of the screen.
306 Uconnect® 8.4AN — If Equipped Tracks Bluetooth® Mode Press the “trks” button on the touchscreen to display a pop up with the Song List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then push the ENTER/BROWSE knob to start playing that track.
Uconnect® 8.4AN — If Equipped 307 To access Bluetooth® mode, press the “Bluetooth®” selection, or return to the beginning of the previous selection if the Bluetooth® device is within the first button on the left side of the display. second of the current selection. Media Mode Press the “Media” button on the touchscreen to select the desired audio source: Bluetooth®. Tracks If the Bluetooth® device supports this feature, press the “trks” button on the touchscreen to display a pop up with the Song List.
308 Uconnect® 8.4AN — If Equipped Uconnect® PHONE Overview • Redialing last dialed numbers (“Redial”). • Calling Back the last incoming call number (“Call Back”). Uconnect® Phone is a voice-activated, hands-free, invehicle communications system. Uconnect® Phone al- • View Call logs on screen (“Show incoming calls,” lows you to dial a phone number with your mobile “Show Outgoing calls,” “Show missed Calls,” “Show phone. Recent Calls”).
Uconnect® 8.4AN — If Equipped 309 Screen Activated Features • Dialing via Keypad using touchscreen. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect® Phone. • Viewing and Calling contacts from Phonebooks disFor Uconnect® customer support: played on the touchscreen. • U.S. residents - visit UconnectPhone.
310 Uconnect® 8.4AN — If Equipped WARNING! Uconnect® Phone Button The Uconnect® Phone button on your steering wheel is used to get into the phone mode and make calls, show recent, incoming, outgoing calls, view phonebook etc., When you press the button you will hear a BEEP. The beep is your signal to give a command. The Uconnect® Phone is driven through your Bluetooth® “Hands-Free Profile” mobile phone.
Uconnect® 8.4AN — If Equipped 311 The Uconnect® Phone is fully integrated with the vehi- • Prior to giving a voice command, one must wait for the beep, which follows the “Listen” prompt or another cle’s audio system. The volume of the Uconnect® Phone prompt. can be adjusted either from the radio volume control knob or from the steering wheel radio control (right • For certain operations, compound commands can be switch), if so equipped. used.
312 Uconnect® 8.4AN — If Equipped works best when you talk in a normal conversational do you want to call?” in the case where a phone call was tone, as if speaking to someone sitting a few feet/ requested but the specific name was not recognized. meters away from you.
Uconnect® 8.4AN — If Equipped 313 Cancel Command At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu. or button on your steering You can also push the wheel when the system is listening for a command and be returned to the main or previous menu. 4 Pair (Link) Uconnect® Phone To A Mobile Phone To begin using your Uconnect® Phone, you must pair your compatible Bluetooth® enabled mobile phone.
314 Uconnect® 8.4AN — If Equipped 1. Push the “Phone” button on the touchscreen to begin. 5. When the pairing process has successfully completed, the system will prompt you to choose whether or not 2. If there is no phone currently connected with the this is your favorite phone. Selecting “Yes” will make system, a pop-up will appear. this phone the highest priority. This phone will take 3. Select “Yes” to begin the pairing process. Then, search precedence over other paired phones within range.
Uconnect® 8.4AN — If Equipped 315 4. Search for available devices on your Bluetooth® enabled mobile phone. When prompted on the phone, 1. Press the “Settings” button on the touchscreen from enter the name and PIN shown on the Uconnect® the Phone main screen, screen, 2. Next, press the “Phone/Bluetooth®” button on the 5. Uconnect® Phone will display an in process screen touchscreen, while the system is connecting, Pair Additional Mobile Phones 6.
316 Uconnect® 8.4AN — If Equipped You can also use the following VR commands to bring up 6. Uconnect® Phone will display an in process screen while the system is connecting, the Paired Phone screen from any screen on the radio: • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth® Streaming Audio Device 1. Press the “Media” button on the touchscreen to begin, 7.
Uconnect® 8.4AN — If Equipped 317 Connecting To A Particular Mobile Phone Or Audio Device After Pairing 2. Press the “Paired Phones” or “Paired Audio Devices” button on the touchscreen. Uconnect® Phone will automatically connect to the high- 3. Press the “Settings” button located to the right of the est priority paired phone and/or Audio Device within device name. range. If you need to choose a particular phone or Audio 4. The options pop-up will be displayed. Device follow these steps: 5.
318 Uconnect® 8.4AN — If Equipped 4. The options pop-up will be displayed. 5. Press the “Delete Device” button on the touchscreen. Phonebook Download (Automatic Phonebook Transfer From Mobile Phone) — If Equipped If equipped and specifically supported by your phone, Uconnect® Phone automatically downloads names (text names) and number entries from the mobile phone’s Making A Phone Or Audio Device A Favorite phonebook. Specific Bluetooth® Phones with Phone 1.
Uconnect® 8.4AN — If Equipped 319 • A maximum of 1000 entries per phone will be down- Managing Your Favorites loaded and updated every time a phone is connected There are three ways you can add an entry to your to the Uconnect® Phone. Favorites. • Depending on the maximum number of entries down- 1. During an active call of a number to make a favorite, loaded, there may be a short delay before the latest press and hold the preset button on the touchscreen on downloaded names can be used.
320 Uconnect® 8.4AN — If Equipped 3. From the Phone main screen, select phonebook. From 3. Press the #Settings# button next to the Favorite you would like to remove. the phonebook screen, select the “Favorites” button on the touchscreen and then select the #Settings# button 4. The Options pop-up will display, press “Remove from on the touchscreen located to the right of the phoneFavs.” book record. Phone Call Features 4. Select an empty entry and press the #Settings# button on that selected entry.
Uconnect® 8.4AN — If Equipped 321 • Dial by pressing in the number Call By Saying A Phonebook Name • Favorites 2. After the “Listening” prompt and the following beep, say “Call John Doe Mobile.” • Recent Call Log 3. The Uconnect® Phone will dial the number associated with John Doe, or if there are multiple numbers it will ask which number you want to call for John Doe. Dial By Saying A Number Call Controls • Voice Commands (Dial by Saying a Name, Call by 1. Push the “Phone” begin.
322 Uconnect® 8.4AN — If Equipped • Mute/unmute • Transfer the call to/from the phone steering wheel to send a touch-tone and say “Send 1234#” or you can say “Send Voicemail Password” if Voicemail password is stored in your mobile phonebook. • Swap two active calls Recent Calls • Join two active calls together Touch-Tone Number Entry You may browse up to 31 of the most recent of each of the following call types: 1. Press the “Phone” button on the touchscreen. • All Calls 2.
Uconnect® 8.4AN — If Equipped 323 NOTE: Incoming can also be replaced with “Outgoing,” NOTE: The Uconnect® Phone compatible phones in the market today do not support rejecting an incoming call “Recent” or “Missed.” when another call is in progress. Therefore, the user can Answer Or Ignore An Incoming Call — No Call only answer an incoming call or ignore it.
324 Uconnect® 8.4AN — If Equipped Toggling Between Calls Redial If two calls are in progress (one active and one on hold), Press the “Redial” button on the touchscreen, or push the and after the “Listening” prompt and press the “Swap” button on the Phone main screen. Only “Phone” button the following beep, say “Redial.” one call can be placed on hold at a time. button to toggle The Uconnect® Phone will call the last number that was You can also press the “Phone” between the active and held phone call.
Uconnect® 8.4AN — If Equipped 325 Advanced Phone Connectivity Transfer Call To And From Mobile Phone Things You Should Know About Your Uconnect® Phone The Uconnect® Phone allows ongoing calls to be trans- Voice Command ferred from your mobile phone to the Uconnect® Phone • For best performance, adjust the rearview mirror to without terminating the call.
326 Uconnect® 8.4AN — If Equipped • Low Road Noise • Smooth Road Surface • Fully Closed Windows Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. Far End Audio Performance • Dry Weather Condition Audio quality is maximized under: Even though the system is designed for many languages • Low-To-Medium Blower Setting and accents, the system may not always work for some.
Uconnect® 8.4AN — If Equipped 327 Performance such as audio clarity, echo, and loudness to text message, and read it to you over the vehicle audio a large degree rely on the phone and network, and not system. You can reply to the message using Voice Recognition, by selecting, or saying one of the 18 pre-defined the Uconnect® Phone. messages. Echo at the far end can sometimes be reduced by Here’s how: Push the “Uconnect® Phone” button and lowering the in-vehicle audio volume.
328 Uconnect® 8.4AN — If Equipped “Yes.” “No.” “Call me.” “Okay.” “I’ll call you later.” “I can’t talk right now.” “I’m on my way.” “I’ll be late.” “Thanks.” “Start without me.” “Where are you?” “Stuck in traffic.” “Are you there yet?” “See you later.” “I’m lost.” “I need directions.” “See you in minutes.” “I will be minutes late.
Uconnect® 8.4AN — If Equipped 329 Want to dictate a personal message? Register with 3. Accept the Allow MAP profile request on your smart phone. (Please refer to device manufacturer instrucUconnect® Access to take advantage of a new, cloudtions for details). based Voice Texting service, an enhancement to Voice Text Reply. To Send A Text Message: Voice Texting allows you to compose a new text or reply 1. Push the Uconnect® Phone button, to an incoming text message.
330 Uconnect® 8.4AN — If Equipped 6. Uconnect® will prompt you “Please say the message 9. Uconnect® will prompt you: To add to your message, that you would like to send” (If you do not hear this say “Continue”; to delete the current message and prompt, you may not have an active subscription with start over, say “Start Over”; to send the current Uconnect® Access). message, say “Send”; to hear the message again, say “Repeat.” 7. Wait for the beep, and then dictate any message up to 140 characters.
Uconnect® 8.
332 Uconnect® 8.4AN — If Equipped Bluetooth® Communication Link General Information Mobile phones have been found to lose connection to the Uconnect® Phone. When this happens, the connection can generally be re-established by switching the mobile phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth® ON mode. This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada.
Uconnect® 8.4AN — If Equipped 333 NAVIGATION Getting Started • Press “Where To?” to find or route to a destination. • Press “View Map” to view the map. To access the Navigation system, press the #Nav# button • Press “Information” to view Traffic, Where Am I? and on the bottom of the touchscreen. Trip Computer information. Main Menu • Press “Emergency” to search for Hospitals, Police and Fire Stations near your current location.
334 Uconnect® 8.4AN — If Equipped Where To? Address Press this button on the touchscreen to search by a street address or a street name with house number. Recent Press this button on the touchscreen to access previously routed addresses or locations. Point of Interest Press this button on the touchscreen when you want to route to a point of interest. The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI).
Uconnect® 8.4AN — If Equipped 335 Intersection Point on Map Press this button on the touchscreen to enter in two street Press this button on the touchscreen to select a destinanames as a destination. tion directly from the Map screen. By selecting a street segment or icon, you can quickly enter a destination Go Home without the need to input the city name or street. Press this button on the touchscreen to program or City Center confirm a route to the saved home address.
336 Uconnect® 8.4AN — If Equipped Closest City Where To? — Address Press this button on the touchscreen to route to a nearby To enter a destination by Address, follow these steps: city. The screen will display an alphabetical listing of 1. While in the Nav Main Menu, press the “Where To?” nearby cities. The navigation system will calculate a route button on the touchscreen, then press the “Address” with the destination at the center of the nearby city. button on the touchscreen.
Uconnect® 8.4AN — If Equipped 337 2. Press “Spell City” or “Spell Street” to begin entering the address of your destination. If you press “Spell Street,” you will have to enter and select/press the desired street name in the correct city and then you will have to enter the house number. To change the state and/or country, press the “state, country” button on the touchscreen and follow the prompts to change the state and/or country.
338 Uconnect® 8.4AN — If Equipped Once the correct City, Street and Number has been If you are currently on a route guidance and you select entered, you will be asked to confirm your destination Recent, the system will ask you to choose one of the by pressing “OK.” following: 3. Press the “Yes” button on the touchscreen to confirm • Cancel previous route your destination and begin your route.
Uconnect® 8.4AN — If Equipped 339 Where To? — Recent To route to a Recent destination, follow these steps: 2. Press the button on the touchscreen with the name of the desired destination. 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Recent” button on the touchscreen. 4 3. Confirm the route with “Yes” to start the route guidance. To delete a destination from the list, press the “Trash Can Icon” button on the touchscreen.
340 Uconnect® 8.4AN — If Equipped To display the options for a destination press the The following Options are available for each destination: “Options” button on the touchscreen that looks like a • Edit Name gear. • Add Phone Number • Move Up in the list • Move Down in the list • Place Pin on the location (saves the spot on the list) NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
Uconnect® 8.4AN — If Equipped 341 You have the following POIs to choose from: To enter a destination by Point of Interest (POI), press the • Gas Stations “Where To?” button from the Nav Main Menu, then press • Restaurants • Hotels/Motels the “Point of Interest” button on the touchscreen. • ATM/Banking • All POIs • Spell POI Name Where To? — Point of Interest The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI)s.
342 Uconnect® 8.4AN — If Equipped You can also change your POI search area, by pressing the “Change Search Area” button on the touchscreen. You will have the following options to change your search area: • Around Me • In a City • Near Destination (only available during route guidance) • Along Route (only available during route guidance) NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
Uconnect® 8.4AN — If Equipped 343 POI — Gas Stations 2. Press the “Gas Stations” button on the touchscreen. To select a Gas Station POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen.
344 Uconnect® 8.4AN — If Equipped You can search for a gas station by the following categories, which are button tabs at the top of the screen. • Name • Distance • Type • ABC (Search) 3. Press the desired Gas Station and press “Yes” to confirm the destination.
Uconnect® 8.4AN — If Equipped 345 POI — Restaurants 2. Press the “Restaurants” button on the touchscreen. To select a Restaurant POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 4 You can search for a restaurants by the following categories, which are button tabs at the top of the screen.
346 Uconnect® 8.4AN — If Equipped 3. Press the desired Restaurant and press “Yes” to con- POI — Hotels/Motels firm the destination. To select a Hotel or Motel POI, follow these steps: If you are currently on a route guidance and you select a 1. While in the Nav Main Menu, press the “Where To?” Restaurant, the system will ask you to choose one of the button on the touchscreen, press the “Point of Interest” following: button on the touchscreen.
Uconnect® 8.4AN — If Equipped 347 2. Press the “Hotels/Motels” button on the touchscreen. • Type • ABC (Search) 3. Press the desired hotel or motel and press “Yes” to confirm the destination.
348 Uconnect® 8.4AN — If Equipped POI — ATM/Banking To select a ATM or Bank POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 2. Press the “ATM/Banking” button on the touchscreen. You can search for an ATM or Bank by the following categories, which are button tabs at the top of the screen.
Uconnect® 8.4AN — If Equipped 349 3. Press the desired ATM or Bank and press “Yes” to All POIs confirm the destination. To select a POI type, follow these steps: If you are currently on a route guidance and you select an 1. While in the Nav Main Menu, press the “Where To?” ATM or Bank POI, the system will ask you to choose one button on the touchscreen, then press the “Point of of the following: Interest” button on the touchscreen.
350 Uconnect® 8.4AN — If Equipped 2. Press “All POIs” button on the touchscreen. You can search through the available POI categories to find your desired POI.
Uconnect® 8.4AN — If Equipped 351 If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. 3. Select a category and then select a subcategory if necessary.
352 Uconnect® 8.4AN — If Equipped POI — Spell Name To select for a specific POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 3. A keyboard will appear on the screen. Type in the POI that you want to search and press the “List” button on the touchscreen to display available items. 4. Press the desired POI and press “Yes” to confirm the destination. 2.
Uconnect® 8.4AN — If Equipped 353 If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination 4 NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — Favorite Destinations To route to a Favorite destination, follow these steps: 2.
354 Uconnect® 8.4AN — If Equipped 4. To save a favorite destination, press the “Add Favor- If you are currently on a route guidance and you select a ite” button on the touchscreen and follow the steps to Favorite, the system will ask you to choose one of the route a destination. following: 5. To display the options for a favorite destination press • Cancel previous route the “Options” button on the touchscreen that looks • Add as first destination like a gear.
Uconnect® 8.4AN — If Equipped 355 2. Press the “Spell Intersection” button on the touchscreen. To enter a destination by Intersection, follow these steps: Where To? — Intersection 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Intersection” button on the touchscreen. 4 This menu shows the default country and state setting.
356 Uconnect® 8.4AN — If Equipped 3. If you press “Spell City,” enter and press the desired 4. Once the correct City and Intersection has been encity name, followed by the desired street name, then tered, you will be asked to confirm your destination. enter the intersection street. 5. Press the “Yes” button on the touchscreen to confirm If you press “Spell Street,” enter and press the desired your destination and begin your route.
Uconnect® 8.4AN — If Equipped 357 Where To? — Go Home To enter your Home Address, follow these steps: If there is no Home Address entered, press “Yes” to enter it now. 2. To set your set your Home Address choose one of the 1. While in the Nav Main Menu, press the “Where To?” following options: button on the touchscreen then press the “Go Home” button on the touchscreen. NOTE: Refer to the individual section of the chosen option for further information.
358 Uconnect® 8.4AN — If Equipped Once you have generated your Home Address, you will Change/Delete Your Home Address be asked to Save it. To change or delete your current Home Address perform 3. Press the “Save” button on the touchscreen to confirm the following: your destination and begin the route to your Home 1. Press the “Go Home” button in the Where To? Menu. Address. 2. Press the “Options” button at the bottom of the 4. This address will be saved as your Home Address and displayed map.
Uconnect® 8.4AN — If Equipped 359 Where To? — Trips To route to a saved Trip, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Recent” button on the touchscreen. 4 3. Press the button on the touchscreen with the name of the desired Trip and press the first destination in the list. 4. Confirm the route by pressing “Yes” to start the route guidance. 2. Press the “Trips” button on the touchscreen.
360 Uconnect® 8.4AN — If Equipped To add a Trip, follow these steps: • Phone Number 1. Press the “Create new Trip” button on the touchscreen. NOTE: Refer to the individual section of the chosen option for further information. 2. Type in the new Trip Name. 5. Add more needed destinations to your trip. 3. Press “Add Destination” to add destinations to your trip. NOTE: Each destination will be listed in order, with the last destination being the final destination. 4.
Uconnect® 8.4AN — If Equipped 361 • Move Down in the list NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — GEO Coordinate To route to a saved Trip, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “GEO Coordinate” button on the touchscreen.
362 Uconnect® 8.4AN — If Equipped 2. Enter the Latitude by typing in the numbers. Use the 4. Enter the Longitude by typing in the numbers. Use the left and right arrows to select specific numbers in the left and right arrows to select specific numbers in the location shown. location shown. 5. Press “OK” to confirm the destination. 6. Press the “Yes” button on the touchscreen to confirm your destination and begin your route.
Uconnect® 8.4AN — If Equipped 363 2. Use the touchscreen to drag the center of the cross over the desired destination. To enter a destination by Point on Map, follow these steps: Where To? — Point on Map 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Point on Map” button on the touchscreen. 4 3.
364 Uconnect® 8.4AN — If Equipped 4. Press the “Yes” button on the touchscreen to confirm Where To? — City Center your destination and begin your route. To enter a destination by City Center, follow these steps: If you are currently on a route guidance and you select a 1. While in the Nav Main Menu, press the “Where To?” Point on Map, the system will ask you to choose one of button on the touchscreen then press the “City Center” the following: button on the touchscreen.
Uconnect® 8.4AN — If Equipped 365 2. Enter the name of the City you would like to route to. If you are currently on a route guidance and you select a City Center, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. 3. Press the desired city from the list. 4.
366 Uconnect® 8.4AN — If Equipped Where To? — Closest City 2. Press the desired city from the list. To enter a destination by Closest City, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Closest City” button on the touchscreen. 3. Press the “Yes” button on the touchscreen to confirm your destination and begin your route.
Uconnect® 8.4AN — If Equipped 367 If you are currently on a route guidance and you select a Closest City, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — Trails 2. Press “Start Trail Recording.” When starting to drive a trail you want to record, follow 3.
368 Uconnect® 8.4AN — If Equipped 2. Enter the Phone Number of the destination you would like to route to. To enter a destination by Phone number, follow these steps: 3. Press the desired destination from the list. Where To? — Phone 1. While in the Nav Main Menu, press the “Where To?” 4. Press the “Yes” button on the touchscreen to confirm button on the touchscreen then press the “Phone your destination and begin your route. Number” button on the touchscreen.
Uconnect® 8.4AN — If Equipped 369 Before Route Guidance Before confirming the route with the “Yes” button on the touchscreen, it is possible to select options different from the default route settings. • Options – Press the “Options” button on the touchscreen to display a list of options to alter your route. To make a selection press and release the desired setting until a check-mark appears.
370 Uconnect® 8.4AN — If Equipped • Avoid – Press the “Avoid” button on the touchscreen • Save – Press the “Save” button on the touchscreen to to choose road types to avoid during your route. To save the destination as a Favorite. make a selection press and release the desired setting Press the “Yes” button on the touchscreen to confirm until a check-mark appears. your destination and to start your route guidance.
Uconnect® 8.4AN — If Equipped 371 With the map displayed you have the following features Press the “View Map” button from the Nav Main Menu available: to display a map of your current position. Menu View Map Press this button on the touchscreen to return to the Nav Main Menu. Zoom In +/Zoom Out – Press the “Zoom In (+) or Zoom Out (–)” buttons on the touchscreen to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels. (E.g.
372 Uconnect® 8.4AN — If Equipped Time of Arrival/Time to Destination/Distance (only Options (only during route guidance) during route guidance) Press the “Options” button on the touchscreen to display Press the button in the upper right area of the screen to the following options. Press the desired button on the the display items available. Press the desired option touchscreen. button on the touchscreen. • 2D North Up/Map View 2D/Map View 3D (3D • Time of Arrival Available On 8.
Uconnect® 8.4AN — If Equipped 373 • Turn List Press this button on the touchscreen to view the turn list for the current route. • Stop Guidance Press this button on the touchscreen to stop route guidance. Where Am I? Press the area in the lower center part of the screen that displays your current location to view the Where Am I? view.
374 Uconnect® 8.4AN — If Equipped View Map — Settings The following Map Settings are available: Map Setup Press this button on the touchscreen to display items to customize how your map is viewed. Settings – Map Setup for more information. Speed Limit Press this button on the touchscreen to turn on/off speed limit warning announcements and to enter a pre-defined speed limit for your route. Guidance Press this button on the touchscreen to display items to customize your route guidance.
Uconnect® 8.4AN — If Equipped 375 GPS Press this button on the touchscreen to change the GPS display. Press the desired button on the touchscreen. • Decimal • DMS • DM Settings — Map Setup With the Map displayed, press the “Options” button on the touchscreen, then press the “Settings” button on the touchscreen and then the “Map Setup” button on the The following Map Setup options are available: touchscreen. You can also access this menu by pressing the “Settings” button lower right of the Nav Main Menu.
376 Uconnect® 8.4AN — If Equipped • 3D (3D Map View Is Only Available On Uconnect Destination Information 8.4AN. Must Select 3D City Models Or 3D Landmarks Press this button on the touchscreen to change the For 3D Map View To Display.) Destination Information that is displayed in the upper • 2D right corner of the Map View. Press the desired button on the touchscreen. Orientation • Time of Arrival Press this button on the touchscreen to change how the Map Orientation is displayed.
Uconnect® 8.4AN — If Equipped 377 • Near POI Icon List • Off Press this button on the touchscreen to display the available Point of Interest icons you would like displayed Vehicle Icon while in Map View. Press and release the desired selecPress this button on the touchscreen to change the vehicle tion button on the touchscreen until a check-mark apicon that is displayed while in Map View. Press Previous pears, showing the setting has been selected. or Next to view the available icons.
378 Uconnect® 8.4AN — If Equipped 3D City Models (Available On The Uconnect 8.4AN) Park Areas Press this button on the touchscreen to display 3D city models while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. Press this button on the touchscreen to display Park Areas while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.
Uconnect® 8.4AN — If Equipped 379 River Names The following Guidance options are available. Press this button on the touchscreen to display River Names while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. • Play Voice Guidance Prompts Press this button on the touchscreen to enable Voice Guidance Prompts during route guidance.
380 Uconnect® 8.4AN — If Equipped • Junction View By Delay Time Manual Off Press this button on the touchscreen to enable Junction View during route guidance. Press and release the button on the touchscreen until a check-mark appears, showing • TMC Avoidance Types (IF Equipped) the setting has been selected.
Uconnect® 8.4AN — If Equipped 381 NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information From the Nav Main Menu, press the “Information” button on the touchscreen and select one of the following options to view additional information.
382 Uconnect® 8.4AN — If Equipped Information — Where Am I? To select “Where Am I?” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen. Where Am I? displays the address and GEO Coordinates of your current location. 3. Press the “GPS” button on the touchscreen to view the GPS information. 2. Press the “Where Am I?” button on the touchscreen. 4. Press the “Save” button on the touchscreen to save the location in your Favorites.
Uconnect® 8.4AN — If Equipped 383 NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information — Trip Computer To select “Trip Computer” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen.
384 Uconnect® 8.4AN — If Equipped 2. Press the “Trip Computer” button on the touchscreen. • Overall average speed • Moving average speed • Maximum speed reached • Total time traveled • Travel time spent moving • Travel time spent stopped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the ‘X’ button on the touchscreen to exit.
Uconnect® 8.4AN — If Equipped 385 • Police – Search and route to a Police Station close to Press the “Save” button on the touchscreen to save your your current location current location in Favorites. • Fire Department – Search and route a Fire Department NOTE: You can press the “back arrow” button on the close to your current location touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
386 Uconnect® 8.4AN — If Equipped Emergency — Hospital To search for a Hospital close to your current location, follow these steps: 1. While in the Nav Main Menu, press the “Emergency” button on the touchscreen. 2. Press the “Hospital” button on the touchscreen. You can search for a Hospital by the following categories, which are button tabs at the top of the screen.
Uconnect® 8.4AN — If Equipped 387 NOTE: In case of emergency, please contact the facility to Emergency — Police verify their availability before proceeding. To search for a Police Station close to your current 3. Press the desired Hospital and press “Yes” to confirm location, follow these steps: the destination. 1.
388 Uconnect® 8.4AN — If Equipped 2. Press the “Police” button on the touchscreen. NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. 3. Press the desired Police Station and press “Yes” to confirm the destination.
Uconnect® 8.4AN — If Equipped 389 2. Press the “Fire Department” button on the touchscreen. To search for a Fire Departmentclose to your current location, follow these steps: Emergency — Fire Department 1. While in the Nav Main Menu, press the “Emergency” button on the touchscreen. 4 You can search for a Fire Department by the following categories, which are button tabs at the top of the screen.
390 Uconnect® 8.4AN — If Equipped • ABC (Search) Map Updates NOTE: In case of emergency, please contact the facility to The map data available in your vehicle is the most up-to-date information that was available when your verify their availability before proceeding. vehicle was built. Map data is updated periodically as 3. Press the desired Fire Department and press “Yes” to map information changes. Follow the steps below if you confirm the destination. wish to obtain an update for your vehicle.
Uconnect® 8.4AN — If Equipped 391 3. Or, if you wish, you can also visit your dealer or place 1. Detailed information on traffic speed, accidents, construction, and road closings. a phone call to request your Map Update. US/CAN General Consumer Support (888-628-6277), Chrysler 2. Traffic information from multiple sources, including Dealer Garmin Support (877-628-4480), or Chrysler police and emergency services, cameras and road Consumer FreshMaps (866-422-8171). sensors. SiriusXM TRAFFIC — U.S.
392 Uconnect® 8.4AN — If Equipped • Weather — Check variety of local and national • To access SiriusXM Travel Link, press the Apps button weather information from radar maps to current and on the touchscreen, then the SiriusXM Travel Link five day forecast. button on the touchscreen. • Fuel Prices — Check local gas and diesel prices in your NOTE: area and route to the station of your choice.
Uconnect® 8.4AN — If Equipped 393 such recording and monitoring in accordance with reguIf your vehicle is equipped with this feature and within latory requirements. You acknowledge, agree and concellular range, you may be able to connect to Roadside sent to any recording, monitoring or sharing of information obtained through any such call recordings. Assistance, Uconnect® Care and Vehicle Care by pressing the “Assist” button on the Rearview Mirror of your 9-1-1 Call — If Equipped vehicle.
394 Uconnect® 8.4AN — If Equipped NOTE: In case the 9-1-1 Call button is pushed in error, there will be a 10 second delay before the 9-1-1 Call system initiates a call to a 9-1-1 operator. To cancel the 9-1-1 Call connection, push the “9-1-1 Call” button on the Rearview Mirror or press the “cancellation” button on the Phone Screen. Termination of the 9-1-1 Call will turn the green LED light on the Rearview Mirror off. 2.
Uconnect® 8.4AN — If Equipped 395 6. If a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit certain vehicle information to a 9-1-1 operator, including the last known GPS coordinates of your vehicle. If a connection is made between a 9-1-1 operator and your vehicle, you understand and agree that 9-1-1 operators may record conversations and sounds in your car upon connection and consent to such recordings.
396 Uconnect® 8.4AN — If Equipped WARNING! Do not add any aftermarket electrical equipment to the vehicle’s electrical system. This may prevent your vehicle from sending a signal to initiate an emergency call. To avoid interference that can cause the 9-1-1 Call system to (Continued) WARNING! (Continued) fail, never add aftermarket equipment (e.g., two way mobile radio, CB radio, data recorder, etc.) to your vehicle’s electrical system or modify the antennas on your vehicle.
Uconnect® 8.4AN — If Equipped 397 WARNING! • Ignoring the Rearview Mirror light could mean you may not have 9-1-1 Call capability if needed. If the Rearview Mirror light is illuminated, have an authorized dealer service the 9-1-1 Call system immediately. • The Occupant Restraint Controller (ORC) turns on the Air Bag Warning Light on the instrument panel if a malfunction is detected in any part of the air bag system.
398 Uconnect® 8.4AN — If Equipped • Operator error by the 9-1-1 operator. • Wireless network congestion. • Weather. • Buildings, structures, geographic terrain, or tunnels. WARNING! Never place anything on or near the vehicle’s wireless and GPS antennas. You could prevent wireless and GPS signal reception, which can prevent your vehicle from placing an emergency call. Wireless and GPS signal reception is required for the 9-1-1 Call system to function properly.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS CONTENTS ! Uconnect® VOICE RECOGNITION . . . . . . . . . .400 ▫ Voice Text Reply . . . . . . . . . . . . . . . . . . . . . .407 ▫ Introducing Uconnect® . . . . . . . . . . . . . . . . .400 ▫ Uconnect® Access* . . . . . . . . . . . . . . . . . . . .408 ▫ Get Started . . . . . . . . . . . . . . . . . . . . . . . . . .400 ▫ Register . . . . . . . . . . . . . . . . . . . . . . . . . . . .409 ▫ Basic Voice Commands. . . . . . . . . . . . . . . . . .
400 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Uconnect® VOICE RECOGNITION Introducing Uconnect® If you see the icon on your touchscreen, you have the Uconnect® 8.4AN system. If not, you have a Uconnect® 8.4A system. Start using Uconnect® Voice Recognition with these Get Started helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect® 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing 8.4A or 8.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 401 5. You can interrupt the help message or system prompts by pressing the VR or Phone button and saying a Voice Command from current category. All you need to control your Uconnect® system with your voice are the buttons on your steering wheel.
402 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect® system. Press the VR button .
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 403 • Tune to ninety-five-point-five FM • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, press the VR button and say “Help.” The system will provide you with a list of commands. 5 Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio® stations you would like to hear. (Subscription or included SiriusXM Satellite Radio trial required.) Press the VR button .
404 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS TIP: Press the Browse button on the touchscreen to see all of the music on your iPod® or USB device. Your Voice Uconnect® offers connections via USB, SD, Bluetooth® Command must match exactly how the artist, album, and auxiliary ports. Voice operation is only available for song and genre information is displayed. connected USB and iPod® devices. (Remote CD player optional and not available on all vehicles.) Media .
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 405 Climate Too hot? Too cold? Adjust vehicle temperatures handsfree and keep everyone comfortable while you keep moving ahead. (If vehicle is equipped with climate control.) Press the VR button following commands% .
406 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS . After 1. To enter a destination, press the VR button the beep, say% • For the 8.4A Uconnect® System, say... “Enter state” • For the 8.4AN Uconnect® System, say... “Navigate to 800 Chrysler Drive Auburn Hills, Michigan” 2. Then follow the system prompts. TIP: To start a POI search, press the VR button After the beep, say “ Find nearest coffee shop.” . Phone Making and answering hands-free phone calls is easy with Uconnect®.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 407 Press the Phone button following commands% . After the beep, say one of the • Call John Smith • Dial 123-456-7890 and follow the system prompts • Redial (call previous outgoing phone number) • Call back (call previous incoming phone number) TIP: When providing a Voice Command, press the Phone and say “Call,” then pronounce the name button exactly as it appears in your phone book.
408 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 2. Listen to the Uconnect® prompts. After the beep, TIP: Your mobile phone must have the full implementarepeat one of the pre-defined messages and follow the tion of the Message Access Profile (MAP) to take advansystem prompts. tage of this feature. For details about MAP, visit UconnectPhone.com. Apple iPhone® iOS6 or later supports reading incoming text messages only. PRE-DEFINED VOICE TEXT REPLY RESPONSES Yes. Stuck in Traffic. See you later.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 409 Register 1. Press the Apps button on the bottom of the 8.4-inch touchscreen. 9-1-1 Call Theft Alarm Notification Remote Door Lock/Unlock 2. If a pop-up message appears, press Register or go to the Favorite Apps menu and press Uconnect® Registration. Stolen Vehicle Assistance Remote Vehicle Start** Yelp® Search Remote Horn and Lights Voice Texting Roadside Assistance Call Wi-Fi Hotspot*** **If vehicle is equipped. ***Extra charges apply. 3.
410 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 5. Click on the link inside the email within 72 hours and Mobile App complete the easy online registration process to create Securely link your mobile device to your vehicle with the a personal Mopar® Owner Connect account linked to Uconnect® Access App. Once you have downloaded the your vehicle. App, you may start your vehicle or lock it from virtually any distance. (Vehicle must be properly equipped with factory-installed Remote Start.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 411 Download the Uconnect® Access App to compatible Voice Texting Apple® or Android® mobile devices. All you need to do 1. To send a message, press the Phone button . After is: the beep, say % Send message to John Smith 1. After registering with Uconnect® Access, log on to 2. Listen to the prompt. After the beep, dictate the your Mopar® Owner Connect account at message you would like to send. Wait for Uconnect® moparownerconnect.com to process your message.
412 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS TIP: • Messages are limited to 140 characters. • The Messaging button on the touchscreen must be illuminated to use the feature. YELP® Once registered with Uconnect® Access, you can use your voice to search for the most popular places or things around you. 1. Press the VR button “Launch YELP” . After the beep, say% 2. Once the YELP® home screen appears on the touch, then say% “YELP screen, press the VR button search” 3.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 413 SiriusXM Travel Link™ Need to find a gas station, view local movie listings, check a sports score or the 5 - day weather forecast? SiriusXM Travel Link™ is a suite of services that brings a wealth of information right to your Uconnect® 8.4AN system. (Not available for 8.4A system.) Press the VR button following commands% TIP: Traffic alerts are not accessible with Voice Command. .
414 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Uconnect® Access Services Support 1-855-792-4241. Please have your Uconnect® Security PIN ready when © 2014 Chrysler Group LLC. All rights reserved. Mopar® you call. and Uconnect® are registered trademarks and Mopar Owner Connect is a trademark of Chrysler Group LLC. Android is a trademark of Google Inc. SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc.
SAFETY GUIDELINES CONTENTS ! SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . .
416 SAFETY GUIDELINES SAFETY GUIDELINES WARNING! ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. • Glance at the screen only when safe to do so. If prolonged viewing of the screen is necessary, park in a safe location and set the parking brake.
SAFETY GUIDELINES 417 • Permanent hearing loss may occur if you play your • Do not spray any liquid or caustic chemicals directly music or the system at loud volumes. Exercise caution on the screen! Use a clean and dry micro fiber lens when setting the volume on your system. cleaning cloth in order to clean the touchscreen. • Keep drinks, rain, and other sources of moisture away • If necessary, use a lint-free cloth dampened with a from your system.
418 SAFETY GUIDELINES FCC Declaration This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
SAFETY GUIDELINES 419 The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones.
Uconnect 8.4A/8.4AN ® 15UC84A-526-AC Third Edition Uconnect® 8.4A/8.
