Operation Manual

Commands
The Voice Command understands two types of com-
mands. Universal commands are available at all times.
Local commands are available if the supported radio
mode is active.
Changing the Volume
1. Start a dialogue by pressing the Voice Command
hard-key.
2. Say a command (e.g., HELP).
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice Command
system is speaking.
Main Menu
Start a dialogue by pressing the Voice Command
hard-key.
You may say MAIN MENU to switch to the main menu.
• In this mode you can say the following commands:
• RADIO (to switch to the radio mode)
• HARD DRIVE (to switch to the HDD mode)
• DISC (to switch to the disc mode)
• VES (to switch to the VES™ mode)
• MEMO (to switch to the memo recorder)
• NAVIGATION (to switch to the navigation mode)
• SYSTEM SETUP (to display the system setup menu)
Radio Menu
You may say RADIO to switch to AM, FM, or SAT.
Say RADIO MENU.
• In this mode you may say the following commands:
• RADIO AM (to switch to the AM band)
NAVIGATION 87