Owner`s manual

SPEED CONTROL

• The speed control switches are located on

the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button to activate the

Speed Control.

• CRUISE READY

will appear on the

instrument cluster to indicate the Speed

Control is on.

• Push the ON/OFF button a second time to

turn the system off.

Set

• With the Speed Control on, push and release

the SET – button to set a desired speed.

Accel/Decel

• Once a speed is set, pushing the RES + button once or the SET – button once will increase or

decrease the set speed approximately 1 mph (1.6 km/h).

• Push and hold the RES + button to accelerate in 5 mph (8 km/h) increments or push and hold

the SET – button to decelerate in 5 mph (8 km/h) increments; release the button to save the

new set speed.

Resume

• To resume a previously selected set speed in memory, push the RES + button and release.

Cancel

• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain the set

speed memory.

• Push the ON/OFF button to turn the system off and erase the set speed memory.

OPERATING YOUR VEHICLE