Owner`s manual

Component Fluid, Lubricant, or Genuine Part Capacities
Transfer Case
We recommend you use MOPAR®
BorgWarner 44–40 Transfer Case.
—
Axle Front
We recommend you use API GL-5 SAE 75W90
Synthetic Gear Lubricant.
—
Axle Rear
We recommend you use API GL-5 SAE 75W140
Synthetic Gear Lubricant.
—
Brake Master Cylinder
We recommend you use MOPAR® DOT 3 and
SAE J1703. If DOT 3 is not available, then DOT 4
is acceptable.
—
Power Steering Reservoir
We recommend you use MOPAR® Power
Steering Fluid + 4, MOPAR® or ATF+4®
Automatic Transmission Fluid.
—
Fuel Selection – 3.6L Engine 87 Octane 19.1 Gallons (72 Liters) (Approximate)
Fuel Selection – 5.7L Engine
87 Octane Acceptable. 89 Octane Recommended.
19.1 Gallons (72 Liters) (Approximate)
SRT8
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant – 6.4L Engine
We recommend you use MOPAR® Antifreeze/
Coolant Ten Year/150,000 Mile Formula OAT
(Organic Additive Technology).
15.2 Quarts (14.4 Liters) Includes heater and
coolant recovery bottle filled to MAX level.
Engine Oil With Filter –6.4L Engine
For best performance and maximum protection
under all types of operating conditions, we recom-
mend full synthetic engine oils that meet the
American Petroleum Institute (API) categories of
SM or SM/CF. The manufacturer recommends
the use of a full synthetic SAE 0W-40 engine oil.
7 Quarts (6.6 Liters)
MAINTAINING YOUR VEHICLE
102