User guide

NOTE: Uconnect™ Phone and Voice Command are vehicle options which must be
ordered separately. The buttons on the radio will only be active if the vehicle has
been equipped with the option.
The radio sales code is located on the lower right side of the radio faceplate.
Unless otherwise noted, the information provided on the operation and
functionality of the radios in this section is common to all non-touch-screen radios.
Seek Up/Down Buttons
Press to seek through radio stations in AM, FM, or SAT bands. Seek through tracks
in CD.
Holding either button will bypass stations without stopping.
Audio Settings
Press the TUNE/SCROLL control knob and BASS, MID, TREBLE, BALANCE and FADE
will display. Rotate the TUNE/SCROLL control knob to select the desired setting.
Auxiliary Mode
The auxiliary (AUX) jack allows a portable device, such as an MP3 player or a
cassette player, to be plugged into the radio and utilize the vehicles audio system
to amplify the source and play through the vehicle speakers.
Pressing the AUX button will change the mode to auxiliary device if the AUX jack is
connected.
The control of the external device cannot be provided by the radio; use the device
controls instead.
Clock Setting
Press and hold the TIME button until the hours blink; turn the TUNE/SCROLL
control knob to set the hours.
Press the TUNE/SCROLL control knob until the minutes begin to blink; turn the
TUNE/SCROLL control knob to set the minutes.
Press the TUNE/SCROLL control knob to save the time change.
To exit, press any button/knob or wait five seconds.
Station Presets
Press the SET/RND button once and SET 1 will show in the display. Then select the
button (1–6).
A second station may be added to each push button. Press the SET/RND button
twice and SET 2 will show in the display, then select button (1–6).
31
ELECTRONICS