Owner's Manual

Display (DID) will display an ⬙Inflate to XX⬙ message and

a graphic showing the pressure values of each tire with

the low tire pressure values in a different color.

Should this occur, you should stop as soon as possible

and inflate the tires with low pressure (those in a

different color in the DID graphic) to the vehicle’s

recommended cold placard pressure value as shown in

the ⬙Inflate to XX⬙ message. Once the system receives the

updated tire pressures, the system will automatically

update, the pressure values in the graphic display in the

DID will return to their original color, and the “Tire

Pressure Monitoring Telltale Light” will turn off. The

vehicle may need to be driven for up to 20 minutes above

15 mph (24 km/h) in order for the TPMS to receive this

information.

SERVICE TPMS Warning

When a system fault is detected, the “Tire Pressure

Monitoring Telltale Light” will flash on and off for 75

seconds and then remain on solid. The system fault will

also sound a chime. In addition, the DID will display a

⬙SERVICE SYSTEM⬙ message for a minimum of five

seconds and then display dashes (- -) in place of the

pressure value to indicate which sensor is not being

received.

Tire Pressure Monitoring Low Pressure Warning

STARTING AND OPERATING 521