Owner's Manual

To apply the park brake manually, pull up on the switch

momentarily. You may hear a slight whirring sound from

the back of the vehicle while the park brake engages.

Once the park brake is fully engaged, the BRAKE warn-

ing lamp in the instrument cluster and an indicator on

the switch will illuminate. If your foot is on the brake

pedal while you apply the park brake, you may notice a

small amount of brake pedal movement. The park brake

can be applied even when the ignition switch if OFF,

however, it can only be released when the ignition switch

in the RUN position.

NOTE: The EPB fault lamp will illuminate if the EPB

switch is held for longer than 20 seconds in the applied

position or 90 seconds in the released position. The light

will extinguish upon releasing the switch.

If the Auto Park Brake feature is enabled, the parking

brake will automatically engage whenever the transmis-

sion is placed into PARK. Once the park brake is en-

gaged, the BRAKE warning lamp in the instrument

cluster and the LED indicator on the switch will illumi-

nate. If your foot is on the brake pedal, you may notice a

small amount of brake pedal movement while the park-

ing brake is engaging.

Electric Park Brake Switch

STARTING AND OPERATING 469