Owner's Manual

OK button. To reset the oil change indicator system (after

performing the scheduled maintenance), refer to the

following procedure.

1. Without pushing the brake pedal, push the ENGINE

START/STOP button and cycle the ignition to the

ON/RUN position (do not start the engine).

2. Fully push the accelerator pedal, slowly, three times

within 10 seconds.

3. Without pushing the brake pedal, push the ENGINE

START/STOP button once to return the ignition to the

OFF/LOCK position.

Secondary Method Of Navigating To The Oil Life

Screen In The DID And Holding OK

1. Without pushing the brake pedal, push the ENGINE

START/STOP button and cycle the ignition to the

ON/RUN position (do not start the engine).

2. Push and release the DOWN arrow button to scroll

downward through the main menu to “Vehicle Info.”

3. Push and release the RIGHT arrow button to access

the “Oil Life” screen.

4. Push and hold the OK button to reset of the Oil Life.

5. Push and release the UP arrow button to exit the

screen.

NOTE: If the indicator message illuminates when you

start the vehicle, the oil change indicator system did not

reset. If necessary, repeat this procedure.

Instrument Cluster Messages For (EVIC) And

(DID)

• Front Seatbelts Unbuckled

• Driver Seatbelt Unbuckled

• Passenger Seatbelt Unbuckled

UNDERSTANDING YOUR INSTRUMENT PANEL 367