2015 300 2015 OWNER’S MANUAL FCA US LLC 15C481-126-AC Third Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA US LLC shall be deemed to be deleted and the name FCA Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated nondrinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS ! INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .4 ! VEHICLE IDENTIFICATION NUMBER . . . . . . . .6 ! HOW TO USE THIS MANUAL . . . . . . . . . . . . . .4 ! VEHICLE MODIFICATIONS/ALTERATIONS . . . .7 ! WARNINGS AND CAUTIONS . . . . . . . . . . . . . .
4 INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new FCA US LLC dealer knows your vehicle best, has factory-trained techvehicle. Be assured that it represents precision workman- nicians and genuine parts, and cares about your satisfaction. ship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS ! A WORD ABOUT YOUR KEYS . . . . . . . . . . . . .11 ▫ To Disarm The System . . . . . . . . . . . . . . . . . . .18 ▫ Keyless Push Button Ignition . . . . . . . . . . . . . .11 ▫ Security System Manual Override . . . . . . . . . . .19 ▫ Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 ! ILLUMINATED ENTRY — IF EQUIPPED . . . . . .19 ▫ Ignition Or Accessory On Message . . . . . . . . . .13 ! REMOTE KEYLESS ENTRY (RKE) . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ! REMOTE STARTING SYSTEM — IF EQUIPPED . .24 ! OCCUPANT RESTRAINT SYSTEMS . . . . . . . . . .42 ▫ How To Use Remote Start . . . . . . . . . . . . . . . .25 ▫ Important Safety Precautions . . . . . . . . . . . . . .42 ! DOOR LOCKS . . . . . . . . . . . . . . . . . . . . . . . . .27 ▫ Seat Belt Systems . . . . . . . . . . . . . . . . . . . . . .44 ▫ Manual Door Locks . . . . . . . . . . . . . . . . . . . . .27 ▫ Supplemental Restraint System (SRS) . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Keyless Push Button Ignition. Key Fob against the Engine START/STOP button and push to operate the ignition. 2 Keyless Push Button Ignition This feature allows the driver to operate the ignition with the push of a button as long as the Remote Keyless Entry (RKE) transmitter is in the passenger compartment.
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key Fob The Key Fob also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead. The emergency key is also for locking/unlocking the glove compartment. You can keep the emergency key with you when valet parking.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Ignition Or Accessory On Message Opening the driver’s door when the ignition is in ACC or ON (engine not running), a chime will sound to remind you to cycle the ignition to OFF. In addition to the chime, the ignition or accessory on message will display in the cluster.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • When leaving the vehicle, always remove the Key Fob from the vehicle and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 The system uses a Key Fob with a factory-mated Remote Should this occur, have the vehicle serviced as soon as Keyless Entry (RKE) transmitter, a Keyless Push Button possible by an authorized dealer. Ignition and a RF receiver to prevent unauthorized vehicle operation. Therefore, only Key Fobs that are CAUTION! programmed to the vehicle can be used to start and operate the vehicle.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When having the Sentry Key® Immobilizer System serviced, bring all vehicle keys with you to an authorized dealer. Replacement Keys NOTE: Only Key Fobs that are programmed to the vehicle electronics can be used to start and operate the Customer Key Programming vehicle. Once a Key Fob is programmed to a vehicle, it Programming Key Fobs or RKE transmitters may be cannot be programmed to any other vehicle. performed at an authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 VEHICLE SECURITY ALARM — IF EQUIPPED To Arm The System The Vehicle Security Alarm monitors the vehicle doors Follow these steps to arm the Vehicle Security Alarm: for unauthorized entry and the Keyless Enter-N-Go™ 1. Make sure the vehicles ignition is placed in the “OFF” START/STOP button for unauthorized operation.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Push the LOCK button on the Remote Keyless Entry NOTE: (RKE) transmitter. • The driver’s door key cylinder and the trunk button on the RKE transmitter cannot arm or disarm the Vehicle 3. If any doors are open, close them. Security Alarm. To Disarm The System The Vehicle Security Alarm can be disarmed using any of • When the Vehicle Security Alarm is armed, the interior power door lock switches will not unlock the doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 exterior lights will flash, the horn will sound. If this NOTE: occurs, disarm the Vehicle Security Alarm. • The front courtesy overhead console and door courtesy lights will turn on if the dimmer control is in the Security System Manual Override “Dome ON” position (extreme top position). The Vehicle Security Alarm will not arm if you lock the doors using the manual door lock plunger.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Driving at speeds 5 mph (8 km/h) and above To Unlock The Doors disables the system from responding to all RKE transmit- Push and release the UNLOCK button on the RKE ter buttons for all RKE transmitters. transmitter once to unlock the driver’s door or twice within five seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 If the vehicle is equipped with Passive Entry, refer to “Keyless Enter-N-Go™” under “Things To Know Before This feature will cause the turn signal lights to flash when Starting Your Vehicle” for further information. the doors are locked with the RKE transmitter. This feature can be turned on or turned off.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • You may need to be less than 35 ft (11 m) from the vehicle when using the RKE transmitter to turn off the To turn the Panic Alarm feature on or off, push and hold Panic Alarm due to the radio frequency noises emitted the PANIC button on the RKE transmitter for at least one by the system. second and release.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 1. Remove the emergency key by sliding the mechanical latch on the back of the RKE transmitter sideways with your thumb and then pull the key out with your other hand. of the RKE transmitter apart. Make sure not to damage the seal during removal. 2 Separating The RKE Transmitter Case 3. Remove the battery by turning the back cover over (battery facing downward) and tapping it lightly on a 2.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE on the battery to the + sign on the inside of the battery clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: • Battery at an acceptable charge level • The vehicle must be equipped with an automatic • transmission to be equipped with Remote Start. • • Obstructions between the vehicle and RKE transmitter • may reduce this range.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Abort Message The following messages will display in the instrument cluster if the vehicle fails to remote start or exits remote start prematurely: • Remote Start Aborted — Door Ajar • Remote Start Aborted — Hood Ajar • Remote Start Aborted — Trunk Ajar • Remote Start Aborted — Fuel Low • Remote Start Disabled — Start Vehicle To Reset The instrument cluster message stays active until the ignition is cycled to the ON/RUN position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • For security, power window and power sunroof op- To Exit Remote Start Mode And Drive The Vehicle eration (if equipped) are disabled when the vehicle is Before the end of 15-minute cycle, push and release the in the Remote Start mode. UNLOCK button on the RKE transmitter to unlock the • The engine can be started two consecutive times (two doors and disarm the Vehicle Security Alarm (if 15-minute cycles) with the RKE transmitter. However, equipped).
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Door Lock Knob If the door lock knob is down when you shut the door, the door will lock. Therefore, make sure the Key Fob is not inside the vehicle before closing the door. • For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children, and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode. A child could operate power windows, other controls, or move the vehicle. 2 Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you push the power door lock switch while the ignition is in the ACC or ON/RUN position, and any front door is open, the power locks will not operate. This prevents you from accidentally locking the Key Fob in the vehicle. Placing the ignition in the OFF position or closing the door will allow the locks to operate. If a door is open, and the ignition is in the ACC or ON/RUN position, a chime will sound as a reminder to remove the Key Fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Child-Protection Door Lock System — Rear Doors To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with Child-Protection Door Lock system. 2 To Engage Or Disengage The Child-Protection Door Lock System 1. Open the rear door. 2. Insert the tip of the emergency key into the lock and rotate to the LOCK or UNLOCK position. 3. Repeat steps 1 and 2 for the opposite rear door.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For emergency exit from the rear seats when the • If wearing gloves on your hands, or if it has been raining on the Passive Entry door handle, the unlock Child-Protection Door Lock System is engaged, manually sensitivity can be affected, resulting in a slower reraise the door lock knob to the unlocked position, roll sponse time. down the window, and open the door using the outside door handle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 To Unlock From The Passenger Side With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors automatically. The interior door panel lock knob will raise when the door is unlocked.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE FOBIK-Safe only executes in vehicles with passive entry. NOTE: The vehicle will only unlock the doors when the There are three situations that trigger a FOBIK-Safe doors are locked using the door panel switch, a valid search in any passive entry vehicle. Passive Entry RKE transmitter is detected inside the vehicle, and no valid Passive Entry RKE transmitter is 1. A lock request is made by a valid Passive Entry RKE detected outside the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 To Enter The Trunk With a valid Passive Entry RKE transmitter within 3 ft (1.0 m) of the deck lid, push the button on the right side of CHMSL (Center High Mounted Stop Light), which is located on the deck lid.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Vehicle’s Doors With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handles, push the door handle LOCK button to lock all four doors. Do NOT grab the door handle when pushing the door handle lock button. This could unlock the door(s).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 NOTE: • After pushing the door handle button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking. 2 • The Passive Entry system will not operate if the RKE transmitter battery is dead.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For vehicles equipped with the Uconnect®, the power window switches will remain active for up to 10 minutes after the ignition is placed in the OFF position. Opening either front door will cancel this feature. The time is programmable. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. WARNING! Never leave children unattended in a vehicle, and do not let children play with power windows.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 To close the window part way, lift the window switch to Reset Auto-Up the first detent and release it when you want the window Should the Auto Up feature stop working, the window to stop. may need to be reset. To reset Auto Up: NOTE: 1. Make sure the door is fully closed. • If the window runs into any obstacle during auto- 2.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE (setting it in the DOWN position). To enable the window controls and the rear sunscreen, push and release the window lockout button again (setting it in the UP position). Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 NOTE: The transmission must be in PARK before the With the ignition in the OFF position, the Trunk Open button will operate. symbol will display until the trunk is closed. Refer to “Keyless Enter-N-Go™” in “Things To Know The trunk lid can be released from Before Starting Your Vehicle” for further information on outside the vehicle by pushing the trunk operation with the Passive Entry feature.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Emergency Release OCCUPANT RESTRAINT SYSTEMS As a security measure, a Trunk Internal Emergency Release lever is built into the trunk latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be opened by actuating the glow-in-the-dark handle attached to the trunk latching mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 2. If a child from 2 to 12 years old (not in a rear-facing 6. All occupants should always wear their lap and child restraint) must ride in the front passenger seat, shoulder belts properly. move the seat as far back as possible and use the 7. The driver and front passenger seats should be moved proper child restraint. (Refer to “Child Restraints”) back as far as practical to allow the Advanced Front 3.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Never place a rear-facing child restraint in front of an air bag. A deploying passenger Advanced Front Air Bag can cause death or serious injury to a child 12 years or younger, including a child in a rearfacing child restraint. • Only use a rear-facing child restraint in a vehicle with a rear seat. ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 After the sequence completes, the Seat Belt Reminder Light remains illuminated until the respective seat belts are buckled. The driver should instruct all other occupants to buckle their seat belts. If an outboard front seat belt is unbuckled while traveling at speeds greater than 5 mph (8 km/h), BeltAlert will provide both audio and visual notification.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, the air bags won’t deploy at all. Always wear your seat belt even though you have air bags. • In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! (Continued) WARNING! (Continued) • A lap belt worn too high can increase the risk of injury in a collision. The seat belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap part of your seat belt as low as possible and keep it snug. • A twisted seat belt may not protect you properly. In a collision, it could even cut into you. Be sure the seat belt is flat against your body, without twists.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. You are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together. • A frayed or torn seat belt could rip apart in a collision and leave you with no protection. Inspect the seat belt system periodically, checking for cuts, frays, or loose parts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 3. When the seat belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 2 Positioning The Lap Belt Inserting Latch Plate Into Buckle 4. Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Position the shoulder belt across the shoulder and 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the seat belt webbing 180 degrees to chest with minimal, if any slack so that it is comfortcreate a fold that begins immediately above the latch able and not resting on your neck. The retractor will plate. withdraw any slack in the shoulder belt. 6. To release the seat belt, push the red button on the 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing or squeezing the release button. To verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage until it is locked into position.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • ONLY use a Seat Belt Extender if it is physically required in order to properly fit the original seat belt system. DO NOT USE the Seat Belt Extender if, when worn, the distance between the front edge of the Seat Belt Extender buckle and the center of the occupant’s body is LESS than 6 inches. • Using a Seat Belt Extender when not needed can increase the risk of serious injury or death in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 The pretensioners are triggered by the Occupant Re- Restraints” section of this manual. The table below straint Controller (ORC). Like the air bags, the preten- defines the type of feature for each seating position. sioners are single use items. A deployed pretensioner or a deployed air bag must be replaced immediately.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the passenger seating position is equipped with an ALR and is being used for normal usage, only pull the seat belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate the ALR. If the ALR is activated, you will hear a ratcheting sound as the seat belt retracts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 How To Disengage The Automatic Locking Mode Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode. WARNING! • The seat belt assembly must be replaced if the switchable Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee Impact Bolsters • Advanced Front Air Bags words “SRS AIRBAG” or “AIRBAG” are embossed on the air bag covers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Never place a rear-facing child restraint in front of an air bag.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • No objects should be placed over or near the air bag on the instrument panel or steering wheel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bags to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 On the other hand, depending on the type and location of impact, Advanced Front Air Bags may deploy in crashes with little vehicle front-end damage but that produce a severe initial deceleration. way as the air bags inflate to their full size. The Advanced Front Air Bags fully inflate in less time than it takes to blink your eyes. The air bags then quickly deflate while helping to restrain the driver and front passenger.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Driver Knee Air Bag This vehicle is equipped with a Supplemental Driver Knee Air Bag mounted in the instrument panel below the steering column. The Supplemental Driver Knee Air Bag provides enhanced protection during a frontal impact by working together with the seat belts, pretensioners, and Advanced Front Air Bags. Supplemental Side Air Bags Your vehicle is equipped with two types of side air bags: 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the SAB inflates. Children are at an even greater risk of injury from a deploying air bag.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE rollover events, in addition to the injury reduction potential provided by the seat belts and body structure. WARNING! The SABICs deploy downward, covering the side windows. An inflating SABIC pushes the outside edge of the trim out of the way and covers the window. The SABICs inflate with enough force to injure you if you are not belted and seated properly, or if items are positioned in the area where the SABICs inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 The SABICs and SABs (“Side Air Bags”) are designed to activate in certain side impacts and certain rollover events. The Occupant Restraint Controller (“ORC”) determines whether the deployment of the Side Air Bags in a particular side impact or rollover event is appropriate, based on the severity and type of collision. Vehicle damage by itself is not a good indicator of whether or not Side Air Bags should have deployed.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Relying on the Side Air Bags alone could lead to more severe injuries in a collision. The Side Air Bags work with your seat belt to restrain you properly. In some collisions, Side Air Bags won’t deploy at all. Always wear your seat belt even though you have Side Air Bags. deploys the left Side Air Bags only and a right side impact deploys the right Side Air Bags only.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 event may be in progress and whether deployment is If you do have a collision which deploys the air bags, any appropriate. A slower-developing event may deploy the or all of the following may occur: seat belt pretensioners on both sides of the vehicle.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE continues, see your doctor. If these particles settle on NOTE: your clothing, follow the garment manufacturer’s in• Air bag covers may not be obvious in the interior trim, structions for cleaning. but they will open during air bag deployment. Do not drive your vehicle after the air bags have de• After any collision, the vehicle should be taken to an ployed. If you are involved in another collision, the air authorized dealer immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Turn on the interior lights, which remain on as long as START or ON/RUN position. If the ignition switch is in the battery has power or until the ignition switch is the OFF position or in the ACC position, the air bag system is not on and the air bags will not inflate. turned to the “OFF” position. • Unlock the doors automatically.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE diagnostics also record the nature of the malfunction. While the air bag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the air bag system immediately. • The Air Bag Warning Light does not come on during the four to eight seconds when the ignition switch is first turned to the ON/RUN position. • The Air Bag Warning Light remains on after the four to eight-second interval.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Redundant Air Bag Warning Light If a fault with the Air Bag Warning Light is detected, which could affect the Supplemental Restraint System (“SRS”), the Redundant Air Bag Warning Light will illuminate on the instrument panel. The Redundant Air Bag Warning Light will stay on until the fault is cleared. In addition, a single chime will sound to alert you that the Redundant Air Bag Warning Light has come on and a fault has been detected.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, including your trim cover and cushion, needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are different sizes and types of restraints for NOTE: children from newborn size to the child almost large • For additional information, refer to enough for an adult safety belt. Always check the child www.seatcheck.org or call 1–866–SEATCHECK. Canaseat Owner’s Manual to make sure you have the correct dian residents should refer to Transport Canada’s seat for your child.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Summary Of Recommendations For Restraining Children In Vehicles Infants and Toddlers Small Children Larger Children Children Too Large for Child Restraints Child Size, Height, Weight Or Age Children who are two years old or younger and who have not reached the height or weight limits of their child restraint Children who are at least two years old or who have out-grown the height or weight limit of their rear-facing child restraint Children who have out-g
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints Safety experts recommend that children ride rear-facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear-facing child restraint. Two types of child restraints can be used rear-facing: infant carriers and convertible child seats. The infant carrier is only used rear-facing in the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Older Children And Child Restraints Children who are two years old or who have outgrown their rear-facing convertible child seat can ride forwardfacing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction are for children who are over two years old or who have outgrown the rear-facing weight or height limit of their rear-facing convertible child seat.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. • After a child restraint is installed in the vehicle, do not move the vehicle seat forward or rearward because it can loosen the child restraint attachments.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 2. Do the child’s knees bend comfortably over the front position. If the shoulder belt contacts the face or neck, of the vehicle seat – while they are still sitting all the move the child closer to the center of the vehicle, or use way back? a booster seat to position the seat belt on the child correctly. 3. Does the shoulder belt cross the child’s shoulder between their neck and arm? 4.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Child + Child Restraint Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child Restraint Forward-Facing Child Restraint Up to 65 lbs (29.5 kg) More than 65 lbs (29.5 kg) Up to 65 lbs (29.5 kg) More than 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Lower Anchors And Tethers For Children (LATCH) Restraint System Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle • • Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 What is the weight limit (child’s weight + weight of the child restraint) for using the LATCH anchorage system to attach the child restraint? 65 lbs (29.5 kg) Can the LATCH anchorages and the seat belt be used together to attach a rear-facing or forwardfacing child restraint? No Use the LATCH anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.5 kg).
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Can two child restraints be attached using a common lower LATCH anchorage? No Can the rear-facing child restraint touch the back of the front passenger seat? Yes Can the head restraints be removed? Yes Never “share” a LATCH anchorage with two or more child restraints.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage symbols on the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating Tether Anchorages There are tether strap anchorages behind each rear seating position located in the panel between the rear seatback and the rear window. They are found under a plastic cover with the tether anchorage symbol on it. Tether Strap Anchorages LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 tether strap. The tether strap will have a hook at the end Always follow the directions of the child restraint manuto attach to the top tether anchorage and a way to tighten facturer when installing your child restraint. Not all child the strap after it is attached to the anchorage. restraint systems will be installed as described here.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE forward and rearward in the vehicle, you may wish to 6. Test that the child restraint is installed tightly by move it to its rear-most position to make room for the pulling back and forth on the child seat at the belt child seat. You may also move the front seat forward path. It should not move more than 1 inch (25.4 mm) to allow more room for the child seat. in any direction. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 WARNING! Installing Child Restraints Using The Vehicle Seat Belt • Improper installation of a child restraint to the LATCH anchorages can lead to failure of the restraint. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. • Child restraint anchorages are designed to withstand only those loads imposed by correctly-fitted child restraints.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle • ALR = Switchable Automatic Locking Retractor • Top Tether Anchorage Symbol
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 What is the weight limit (child’s weight + weight of the child restraint) for using the Tether Anchor with the seat belt to attach a forward facing child restraint? Can the rear-facing child restraint touch the back of the front passenger seat? Weight limit of the Child Restraint Can the head restraints be removed? Can the buckle stalk be twisted to tighten the seat belt against the belt path of the child restraint? Yes Yes No Always use the tether ancho
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. To lock the seat belt, pull down on the shoulder part of the belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing to retract 1. Place the child seat in the center of the seating back into the retractor. As the webbing retracts, you position. For some second row seats, you may need to will hear a clicking sound.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 strap. See the section “Installing Child Restraints Using the Top Tether Anchorage” for directions to attach a tether anchor. 9. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any direction. Any seat belt system will loosen with time, so check the seat belt occasionally, and pull it tight if necessary.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available. 2. Rotate or lift the cover to access the anchor directly behind the seat where you are placing the child restraint. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 5. Remove slack in the tether strap according to the child Transporting Pets restraint manufacturer’s instructions. Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly WARNING! injured, or injure a passenger during panic braking or in • An incorrectly anchored tether strap could lead to a collision. increased head motion and possible injury to the child.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as a problem.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 WARNING! (Continued) WARNING! (Continued) • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly. eventually poison you.
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle. Use only floor mats that leave the pedal area unobstructed and that are firmly secured so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly installed, if not equipped from the factory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ! MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 ▫ Power Folding Outside Mirrors — If Equipped . .115 ▫ Automatic Dimming Mirror — If Equipped . . .106 ▫ Heated Mirrors — If Equipped . . . . . . . . . . . .115 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . .112 ▫ Illuminated Vanity Mirrors — If Equipped . . .115 ▫ Outside Mirrors Folding Feature — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ! SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 ! TO OPEN AND CLOSE THE HOOD . . . . . . . . .144 ▫ Power Seats . . . . . . . . . . . . . . . . . . . . . . . . .127 ! LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 ▫ Power Lumbar — If Equipped . . . . . . . . . . . .130 ▫ Headlight Switch . . . . . . . . . . . . . . . . . . . . .145 ▫ Heated Seats — If Equipped . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 ▫ Multifunction Lever . . . . . . . . . . . . . . . . . . .151 ▫ Windshield Washers . . . . . . . . . . . . . . . . . . .159 ▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . .151 ▫ Headlights On With Wipers (Available With Automatic Headlights Only) . . . . . . . . . . . . .160 ▫ Lane Change Assist . . . . . . . . . . . . . . . . . . .152 ▫ High/Low Beam Switch . . . . . . . . . . . . . . . .152 ▫ Flash-To-Pass . . . . . . . . . . . . . . . .
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . .170 ▫ Setting The Following Distance In ACC . . . . . .182 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . .170 ▫ Overtake Aid . . . . . . . . . . . . . . . . . . . . . . . .186 ▫ To Accelerate For Passing . . . . . . . . . . . . . . . .172 ▫ ACC Operation At Stop . . . . . . . . . . . . . . . . .186 ! ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 ▫ Changing FCW And Active Braking Status. . . .202 ▫ Enabling And Disabling ParkSense® . . . . . . . .219 ▫ FCW Limited Warning . . . . . . . . . . . . . . . . . .203 ▫ Service The ParkSense® Park Assist System . . .220 ▫ Service FCW Warning . . . . . . . . . . . . . . . . . .203 ▫ Cleaning The ParkSense® System . . . . . . . . . .221 ! LANESENSE — IF EQUIPPED . . . . . . . . . . . . .203 ▫ ParkSense® System Usage Precautions. . . . . . .
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Programming A Non-Rolling Code . . . . . . . . .232 ▫ Opening Power Shade — Manual Mode . . . . .239 ▫ Canadian/Gate Operator Programming . . . . . .233 ▫ Closing Power Shade — Express . . . . . . . . . . .240 ▫ Using HomeLink® . . . . . . . . . . . . . . . . . . . .235 ▫ Closing Power Shade — Manual Mode . . . . . .240 ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . .235 ▫ Venting Sunroof — Express . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 ▫ Glove Compartment . . . . . . . . . . . . . . . . . . .249 ▫ Grocery Bag Hooks . . . . . . . . . . . . . . . . . . . .254 ▫ Console Features . . . . . . . . . . . . . . . . . . . . .249 ▫ Cargo Net . . . . . . . . . . . . . . . . . . . . . . . . . . .255 ▫ Door Storage . . . . . . . . . . . . . . . . . . . . . . . . .251 ! REAR WINDOW FEATURES . . . . . . . . . . . . . .255 ▫ Rear Seat Armrest Storage — If Equipped . . . .252 ▫ Rear Window Defroster . .
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Automatic Dimming Mirror feature can be turned on or off using the Uconnect® System. Refer to Automatic Dimming Mirror — If Equipped “Uconnect® Settings” in “Understanding Your InstruA single ball joint mirror is provided in the vehicle. It is ment Panel” for further information. a twist on mirror that has a fixed position at the windshield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 NOTE: The ASSIST and 9–1–1 features operate through • Vehicle Customer Care – Total support for all other the Uconnect® Access service. These buttons will only vehicle issues. operate as long as your Uconnect® Access service is 9-1-1 Call active. Refer to your “Uconnect® System supplement 1. Push the 9-1-1 Call button on the Rearview Mirror. manual” for further information.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Once a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit the following important vehicle information to a 9-1-1 operator: NOTE: Once a connection is made between the vehicle’s 9-1-1 Call system and the 9-1-1 operator, the 9-1-1 operator may be able to open a voice connection with the vehicle to determine if additional help is needed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 WARNING! WARNING! (Continued) • If anyone in the vehicle could be in danger (e.g., fire or smoke is visible, dangerous road conditions or location), do not wait for voice contact from a 9-1-1 operator. All occupants should exit the vehicle immediately and move to a safe location. • The 9-1-1 Call system is embedded into the vehicle’s electrical system. Do not add aftermarket electrical equipment to the vehicle’s electrical system.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the 9-1-1 Call system detects a malfunction, any of the following may occur at the time the malfunction is detected, and at the beginning of each ignition cycle: • The Rearview Mirror light located between the Assist and 9-1-1 buttons will continuously be illuminated red. • The Phone Screen will display the following message “Vehicle phone requires service. Please contact your dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Even if the 9-1-1 Call system is fully functional, factors • Wireless network congestion. beyond FCA US LLC’s control may prevent or stop the • Weather. 9-1-1 Call system operation. These include, but are not limited to, the following factors: • Buildings, structures, geographic terrain, or tunnels. • Delayed accessories mode is active. • • • • • • NOTE: Never place anything on or near the vehicle’s wireless and GPS antennas.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 The fourth LED supplies illuminated entry lighting, which turns on in both mirrors when you use the Remote This feature is controlled by the inside automatic dimKeyless Entry (RKE) transmitter or open any door. This ming mirror and will automatically adjust for headlight LED shines outward to illuminate the front and rear door glare when the inside mirror adjusts. handles.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE vehicle is shifted out of the REVERSE position. Each stored memory setting will have an associated Tilt Mirrors in Reverse position. NOTE: The Tilt Mirrors in Reverse feature is not turned on when delivered from the factory. The Tilt Mirrors in Reverse feature can be turned on and off using the Uconnect® System. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Using the mirror control switch, push on any of the four If the mirrors are in the folded position, and vehicle arrows for the direction that you want the mirror to speed is equal or greater than 10 mph (16 km/h), they will automatically unfold. move. Power mirror preselected positions can be controlled by Heated Mirrors — If Equipped the optional Memory Seat Feature.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE use the extender feature of the sun visor, grab the extender which is located at the rear of the visor and pull rearward. Illuminated Vanity Mirror “Slide-On-Rod” And Extender Features Of Sun Visor To use the “Slide-On-Rod” feature of the sun visor, rotate the sun visor downward and swing the sun visor so it is parallel to the side window, grab the sun visor and pull rearwards until the sun visor is in the desired position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 BLIND SPOT MONITORING (BSM) — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radarbased sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones from the rear/front/side of the vehicle.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE both sides of the vehicle when the vehicle speed reaches approximately 6 mph (10 km/h) or higher and will alert the driver of vehicles in these areas. NOTE: • The BSM system does NOT alert the driver about rapidly approaching vehicles that are outside the detection zones. • The BSM system detection zone DOES NOT change if your vehicle is towing a trailer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 The area on the rear fascia where the radar sensors are located must remain free of snow, ice, and dirt/road contamination so that the BSM system can function properly. Do not block the area of the rear fascia where the radar sensors are located with foreign objects (bumper stickers, bicycle racks, etc.).
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 m.p.h. (48 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Overtaking Traffic If you pass another vehicle slowly with a relative speed of less than 15 m.p.h. (24 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 15 m.p.h. (24 km/h), the warning light will not illuminate.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtaking/Passing The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 WARNING! (Continued) system is not designed to detect pedestrians, bicyclists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicle’s mirrors, glance over your shoulder, and use your turn signal before changing lanes. Failure to do so can result in serious injury or death. Rear Cross Path Opposing Traffic WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radio volume.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 turn signal is then activated, and it corresponds to an Three selectable modes of operation are available in the alert present on that side of the vehicle, an audible chime Uconnect® System. Refer to “Uconnect® Settings/ will also be sounded. Whenever a turn signal and detected object are present on the same side at the same Customer Programmable Features” in “Understanding time, both the visual and audio alerts will be issued.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Blind Spot Alert Off Operation is subject to the following two conditions: When the BSM system is turned off there will be no 1. The device may not cause harmful interference. visual or audible alerts from either the BSM or RCP 2. The device must accept any interference received, systems. including interference that may cause undesired opNOTE: The BSM system will store the current operating eration of the device. mode when the vehicle is shut off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 SEATS Power Seats Seats are a part of the Occupant Restraint System of the On models equipped with power seats, the switch is vehicle. located on the outboard side of the seat near the floor. Use this switch to move the driver’s seat up or down, forward or rearward or to recline the seatback. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Power Seat Switches 1 — Seat Control 2 — Seatback Control — (If Equipped) • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Adjusting The Seat Forward Or Rearward Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 The front driver and passenger heated seats are operated using the Uconnect® System. WARNING! Power Lumbar Switch Heated Seats — If Equipped On some models, the front and rear seats may be equipped with heaters in both the seat cushions and seatbacks.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE will change from HI to LO, indicating the change. The LO-level setting will turn OFF automatically after apThe front heated seats control buttons are located within proximately 45 minutes. the climate or controls screen of the touchscreen. NOTE: You can choose from HI, LO or OFF heat settings. The indicator lights in each switch indicate the level of heat in • Once a heat setting is selected, heat will be felt within use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Rear Heated Seats NOTE: On some models, the two outboard seats are equipped • Once a heat setting is selected, heat will be felt within with heated seats. The heated seat switches for these two to five minutes. seats are located on the rear of the center console. There that allow the rear • The engine must be running for the heated seats to are two heated seat switches operate. passengers to operate the seats independently.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The engine must be running for the ventilated Located in the seat cushion and seat back are small fans seats to operate. that draw the air from the passenger compartment and Vehicles Equipped With Remote Start move air through fine perforations in the seat cover to help keep the driver and front passenger cooler in higher On models that are equipped with remote start, the ambient temperatures.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision. The RHRs will automatically return to their normal position following a rear impact.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjustment Button 1 — Release Button 2 — Adjustment Button • A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed head restraints in a location outside the occupant compartment. • ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Rear Head Restraints The center head restraint has two adjustable positions, up or down. When the center seat is being occupied the head restraint should be in the raised position. When there are no occupants in the center seat the head restraint can be lowered for maximum visibility for the driver. 3 To raise the head restraint, pull upward on the head restraint.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • The head restraint should only be removed by qualified technicians, for service purposes only. If the center rear head restraints requires removal, see your authorized dealer. • The outboard head restraints are not adjustable. Folding Rear Seat The rear seatbacks can be folded forward to provide an additional storage area. To fold the rear seatback, pull on the loops located on the upper seatback. NOTE: These loops can be tucked away when not in use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 WARNING! Folded Rear Seatback When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap. • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED This feature allows the driver to store up to two different memory profiles for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat, side mirrors, adjustable pedals (if equipped), and power tilt and telescopic steering column (if equipped) and a set of desired radio station presets.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Programming The Memory Feature To create a new memory profile, perform the following: Linking And Unlinking The Remote Keyless Entry Transmitter To Memory Your RKE transmitters can be programmed to recall one of two pre-programmed memory profiles by pushing the 2. Adjust all memory profile settings to desired prefer- UNLOCK button on the RKE transmitter. ences (i.e.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If a memory profile has not already been set, Memory Position Recall refer to #Programming The Memory Feature# in this NOTE: The vehicle must be in PARK to recall memory section for instructions on how to set a memory profile. positions. If a recall is attempted when the vehicle is not 3. Once the profile has been recalled, push and release in PARK, a message will display in the DID (if equipped).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 • The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9 in (22.7 mm) This feature provides automatic driver seat positioning to forward of the rear stop. At this position, there is no enhance driver mobility when entering and exiting the benefit to the driver by moving the seat for Easy Exit vehicle. or Easy Entry.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. 1. Pull the hood release lever located under the left side of the instrument panel. 2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Hood Safety Latch Hood Release Lever Use the hood prop rod (if equipped) to secure the hood in the open position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 inches (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch counterclockwise to the AUTO position. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 is set to ON. In addition, the headlights will turn off If you turn the headlights or parking lights on, or place when the wipers are turned off if they were turned on by the ignition in ACC or RUN, the system will cancel the delay. this feature. NOTE: The Headlights On with Wipers feature can be turned on or off using the Uconnect® System.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, The Automatic High Beam Headlamp Control system and other obstructions on the windshield or camera provides increased forward lighting at night by automatlens will cause the system to function improperly. ing high beam control through the use of a digital camera mounted on the windshield.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 To Deactivate • The Adaptive Headlight System is active only when the vehicle is moving forward. 1. Pull the multifunction lever toward you (or rearward in car) to manually deactivate the system (normal The Adaptive Headlight System can be turned On or Off using the Uconnect® System, refer to “Uconnect® Setoperation of low beams). tings” in “Understanding Your Instrument Panel” for 2.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lights-On Reminder If the headlights or parking lights are on after the ignition is placed in the OFF position, a chime will sound to alert the driver when the driver’s door is opened. Fog Lights — If Equipped Front Fog Lights — If Equipped The front fog light switch is built into the headlight switch. Fog Light Switch To activate the front fog lights, turn on the parking lights or the low beam headlights and push the headlight switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 NOTE: The fog lights will operate with the low beam headlights or parking lights on. However, selecting the high beam headlights will turn off the fog lights. Multifunction Lever 3 The multifunction lever controls the operation of the turn signals, headlight beam selection and passing lights. The multifunction lever is located on the left side of the steering column.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: High/Low Beam Switch • If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. Push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever toward you to switch the headlights back to low beam.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 second time. The lights will also turn on when the The front map/reading lights are mounted in the over- UNLOCK button on the Remote Keyless Entry (RKE) is pushed. head console. Front Map/Reading Lights — If Equipped 3 Front Map/Reading Lights Each light can be turned on by pushing a switch on either side of the console. These buttons are backlit for night time visibility.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy Lights Ambient Light — If Equipped The courtesy lights can be turned on by pushing the top The overhead console is equipped with an ambient light corner of the lens. To turn the lights off, push the lens a feature. This light casts illumination for improved visibilsecond time. ity of the floor and center console area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Interior Lights Dimmer Controls The interior lights come on when a door is opened. The dimmer control is part of the headlight switch and is located on the left side of the instrument panel. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE With the parking lights or headlights on, rotating the left dimmer control upward will increase the brightness of the instrument panel lights and lighted cupholders (if equipped). Instrument Panel Dimmer Ambient Light Control Rotate the right dimmer control upward or downward to increase or decrease the brightness of the door handle lights and ambient light located in the overhead console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Dome Light Position WINDSHIELD WIPERS AND WASHERS Rotate the left dimmer control completely upward to the second detent to turn on the interior lights. The interior lights will remain on when the dimmer control is in this position. The multifunction lever operates the windshield wipers and washer when the ignition is placed in the ON/RUN or ACC position. The multifunction lever is located on the left side of the steering column.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the multifunction lever to the first detent position, and then turn the end of the lever to select the desired delay interval.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 If you activate the washer while the windshield wiper control is in the delay range, the wipers will operate for Rotate the end of the lever downward to the Mist two wipe cycles after releasing the lever and then resume position to activate a single wipe cycle to clear off road the intermittent interval previously selected. mist or spray from a passing vehicle.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights On With Wipers (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on after the wipers are turned on if the headlight switch is placed in the AUTO position and programmable feature is set to ON. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature. NOTE: The Headlights On with Wipers feature can be turned on or off using the Uconnect® System.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 NOTE: vehicle speed becomes greater than 0 mph (0 km/h) or the outside temperature rises above freezing. • The Rain Sensing feature will not operate when the wiper speed is in the low or high position.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column. To unlock the steering column, pull the lever downward. To tilt the steering column, move the steering wheel upward or downward as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 POWER TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The power tilt/telescoping steering column switch is located below the multifunction lever on the steering column. 3 Power Tilt/Telescoping Steering Switch To tilt the steering column, move the switch up or down as desired.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmitter or the memory switch on the driver’s door trim panel to return the tilt/telescopic steering column to preprogrammed positions. Refer to “Driver Memory Seat” in this section. WARNING! Do not adjust the steering column while driving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 NOTE: The engine must be running for the heated steering wheel to operate. Vehicles Equipped With Remote Start On models that are equipped with remote start, the heated steering wheel can be programmed to come on during a remote start through the Uconnect® system. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ADJUSTABLE PEDALS — IF EQUIPPED The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. This feature allows the brake and accelerator pedals to move toward or away from the driver to provide improved position with the steering wheel. The switch is located on the front side of the driver’s seat cushion side shield.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Push the switch rearward to move the pedals rearward • For vehicles equipped with Driver Memory Seat, you (toward the driver). can use your Remote Keyless Entry (RKE) transmitter or the memory switch on the driver’s door trim panel • The pedals can be adjusted with the ignition OFF. to return the adjustable pedals to pre-programmed • The pedals cannot be adjusted when the vehicle is in positions.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not adjust the pedals while the vehicle is moving. You could lose control and have an accident. Always adjust the pedals while the vehicle is parked. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The drivers preferred units can be selected through the instrument panel settings if equipped. Refer to “UnderA soft tap on the brake pedal, pushing the CANCEL standing Your Instrument Panel” for more information. button, or normal brake pressure while slowing the The speed increment shown is dependant on the chosen vehicle will deactivate the Electronic Speed Control withspeed unit of U.S. (mph) or Metric (km/h): out erasing the set speed from memory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Metric Speed (km/h) U.S. Speed (mph) • Pushing the SET + button once will result in a 1 km/h • Pushing the SET - button once will result in a 1 mph increase in set speed. Each subsequent tap of the decrease in set speed. Each subsequent tap of the button results in an increase of 1 km/h. button results in a decrease of 1 mph.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Accelerate For Passing Push the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Using Electronic Speed Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 ACC will allow you to keep cruise control engaged in The Cruise Control system has two control modes: light to moderate traffic conditions without the constant • Adaptive Cruise Control mode for maintaining an need to reset your cruise control. ACC utilizes a radar appropriate distance between vehicles. sensor and a forward facing camera designed to detect a vehicle directly ahead of you.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Adaptive Cruise Control (ACC) is a convenience system. It is not a substitute for active driving involvement. It is always the driver’s responsibility to be attentive of road, traffic, and weather conditions, vehicle speed, distance to the vehicle ahead; and, most importantly, brake operation to ensure safe operation of the vehicle under all road conditions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! (Continued) • When driving in fog, heavy rain, heavy snow, sleet, heavy traffic, and complex driving situations (i.e., in highway construction zones). • When entering a turn lane or highway off ramp; when driving on roads that are winding, icy, snowcovered, slippery, or have steep uphill or downhill slopes. • When towing a trailer up or down steep slopes. • When circumstances do not allow safe driving at a constant speed.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Any chassis/suspension or tire size modifications NOTE: You cannot engage ACC under the following to the vehicle will effect the performance of the Adaptive conditions: Cruise Control and Forward Collision Warning System. • When you apply the brakes. Activating Adaptive Cruise Control (ACC) • When the parking brake is set. You can only engage ACC if the vehicle speed is above • When the automatic transmission is in PARK, RE0 mph (0 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 To turn the system OFF, push and release the Adaptive Push and release the Adaptive Cruise Control (ACC) Cruise Control (ACC) ON/OFF button again. At this ON/OFF button. The ACC menu in the DID displays time, the system will turn off and the DID will display “Adaptive Cruise Control (ACC) Off.” “ACC Ready.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! NOTE: ACC cannot be set if there is a stationary vehicle in front of your vehicle in close proximity. Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have a collision. Always leave the system off when you are not using it. Remove your foot from the accelerator pedal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 • The shift lever/gear selector is removed from the To Turn Off Drive position. The system will turn off and erase the set speed in • The Electronic Stability Control/Traction Control Sys- memory if: tem (ESC/TCS) activates. • The Normal (Fixed Speed) Electronic Speed Control ON/OFF button is pushed. • The vehicle parking brake is applied. • Driver seatbelt is unbuckled at low speeds. • Driver door is opened at low speeds. NOTE: • The ignition is turned off.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To Vary The Speed Setting • If your vehicle stays at standstill for longer than two To Increase Speed seconds, then the system will cancel and the brake While ACC is set, you can increase the set speed by force will be ramped-out. The driver will have to apply pushing the SET + button. the brakes to keep the vehicle at a standstill.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Metric Speed (km/h) U.S. Speed (mph) • Pushing the SET + button once will result in a 1 km/h • Pushing the SET - button once will result in a 1 mph increase in set speed. Each subsequent tap of the decrease in set speed. Each subsequent tap of the button results in an increase of 1 km/h. button results in a decrease of 1 mph.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • When you override and push the SET + button or SET - buttons, the new Set Speed will be the current speed of the vehicle. • When you use the SET - button to decelerate, if the engine’s braking power does not slow the vehicle sufficiently to reach the set speed, the brake system will automatically slow the vehicle. • The ACC system decelerates the vehicle to a full stop when following a target vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 3 Distance Setting 4 Bars (Longest) Distance Setting 3 Bars (Long)
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Distance Setting 2 Bars (Medium) Distance Setting 1 Bar (Short) To increase the distance setting, push the Distance Setting — Increase button and release. Each time the button is pushed, the distance setting increases by one bar (longer).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 To decrease the distance setting, push the Distance Set- • The distance setting is changed. ting — Decrease button and release. Each time the button • The system disengages. (Refer to the information on is pushed, the distance setting decreases by one bar ACC Activation). (shorter). The maximum braking applied by ACC is limited; howIf there is no vehicle ahead, the vehicle will maintain the ever, the driver can always apply the brakes manually, if set speed.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtake Aid When driving with ACC engaged and following a vehicle, the system will provide an additional acceleration up to the ACC set speed to assist in passing the vehicle. This additional acceleration is triggered when the driver utilizes the left turn signal and will only be active when passing on the left hand side.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 A cancel message will display on the DID and produce a Adaptive Cruise Control (ACC) Menu warning chime. Driver intervention will be required at The DID displays the current ACC system settings. The this moment. DID is located in the center of the instrument cluster. The While ACC with Stop is holding your vehicle at a information it displays depends on ACC system status.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Push the SET + or the SET- button (located on the steering Display Warnings And Maintenance wheel) and the following will display in the DID: “Wipe Front Radar Sensor In Front Of Vehicle” ACC SET Warning When ACC is set, the set speed will display in the The “ACC/FCW Unavailable Wipe Front Radar Sensor” warning will display and also a chime will indicate when instrument cluster. conditions temporarily limit system performance.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 vehicle has left these areas. Under rare conditions, when • Do not remove any screws from the sensor. Doing so the radar is not tracking any vehicles or objects in its path could cause an ACC system malfunction or failure and this warning may temporarily occur. require a sensor realignment.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE obstructions, such as mud, dirt, or ice on windshield and fog on the inside of glass. In these cases, the DID will • If the “ACC/FCW Unavailable Wipe Front Radar display “ACC/FCW Limited Functionality Clean Front Sensor” message occurs frequently (e.g. more than Windshield” and the system will have degraded perforonce on every trip) without any snow, rain, mud, or mance.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 When the condition that created limited functionality is Precautions While Driving With ACC no longer present, the system will return to full function- In certain driving situations, ACC may have detection ality. issues. In these cases, ACC may brake late or unexpectNOTE: If the “ACC/FCW Limited Functionality Clean edly. The driver needs to stay alert and may need to Front Windshield” message occurs frequently (e.g. more intervene.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the vehicle is out of the curve the system will resume your original Set Speed. This is a part of normal ACC system functionality. NOTE: On tight turns ACC performance may be limited. Offset Driving Condition Example Turns And Bends When driving on a curve with ACC engaged, the system may decrease the vehicle speed and acceleration for stability reasons, with no target vehicle detected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Using ACC On Hills Lane Changing When driving on hills, ACC may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, ACC performance may be limited. ACC may not detect a vehicle until it is completely in the lane in which you are traveling.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Narrow Vehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There may not be sufficient distance to the vehicle ahead.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Stationary Objects And Vehicles General Information ACC does not react to stationary objects and stationary vehicles. For example, ACC will not react in situations where the vehicle you are following exits your lane and the vehicle ahead is stopped in your lane. Always be attentive and ready to apply the brakes if necessary.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Normal (Fixed Speed) Electronic Speed Control Mode In addition to Adaptive Cruise Control mode, a Normal (Fixed Speed) Electronic Speed Control mode is available for cruising at fixed speeds. The Normal (Fixed Speed) Electronic Speed Control mode is designed to maintain a set cruising speed without requiring the driver to operate the accelerator. Electronic Speed Control can only be operated if the vehicle speed is above 20 mph (32 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Once a speed has been set a message (CRUISE CON- U.S. Speed (mph) TROL SET TO MPH/KM) will appear indicating what • Pushing the SET + button once will result in a 1 mph speed was set. This light will turn on when the electronic increase in set speed. Each subsequent tap of the speed control is SET. button results in an increase of 1 mph.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Decrease Speed Metric Speed (km/h) When the Normal (Fixed Speed) Cruise Control is set, • Pushing the SET - button once will result in a 1 km/h you can decrease speed by pushing the SET - button. decrease in set speed. Each subsequent tap of the button results in a decrease of 1 km/h. The drivers preferred units can be selected through the instrument panel settings if equipped.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 • The vehicle parking brake is applied. • The Adaptive Cruise Control (ACC) On/Off button is pushed. • The braking temperature exceeds normal range (overheated). FORWARD COLLISION WARNING (FCW) WITH • The shift lever/gear selector is removed from the MITIGATION — IF EQUIPPED Drive position.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: FCW monitors the information from the forward event stops the vehicle completely, the system will hold looking sensors as well as the Electronic Brake Controller the vehicle at standstill for two seconds and then release (EBC), to calculate the probability of a forward collision. the brakes. When the system determines that a forward collision is probable, the driver will be provided with audible and visual warnings and may provide a brake jerk warning.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 When the system determines a collision with the vehicle in front of you is no longer probable, the warning message will be deactivated. NOTE: • The minimum speed for FCW activation is 1 mph (2 km/h). • The FCW alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the course prediction. This is expected and is a part of normal FCW activation and functionality.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the FCW system OFF, push the forward collision Changing FCW And Active Braking Status button once to turn the system OFF (led turns on). The FCW Sensitivity And Active Braking Settings are To turn the FCW system back ON, push the forward programmable through the Uconnect® System. Refer to collision button again to turn the system ON (led turns “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. off).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 fully available. Once the condition that limited the system performance is no longer present, the system will • The system will retain the last setting selected by the return to its full performance state. If the problem perdriver after ignition shut down. sists, see your authorized dealer.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LaneSense system uses a forward looking camera to remain within the lane. When only a single lane marking detect lane markings and measure vehicle position is detected, a haptic (torque) warning will not be prowithin the lane boundaries. vided.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 To turn the LaneSense system OFF, push the LaneSense button once to turn the system OFF (LED turns on). NOTE: The LaneSense system will retain the last system state ON or OFF from the last ignition cycle when the ignition is changed to the ON/RUN position. LaneSense Warning Message The LaneSense system will indicate the current lane drift condition through the Driver Information Display (DID). 7.
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When the LaneSense system senses the lane has been approached and is in a lane departure situation, the left thick lane line flashes yellow (on/off), the left thin line remains solid yellow and the LaneSense indicator changes from solid white to flashing yellow.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 • For example: If approaching the left side of the lane the steering wheel will turn to the right. 3 Lanes Sensed (White Lines/Green Indicator) • When the LaneSense system senses a lane drift situation, the left thick lane line and left thin line turn solid yellow. The LaneSense indicator changes from solid green to solid yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When the LaneSense system senses the lane has been approached and is in a lane departure situation, the left thick lane line flashes yellow (on/off) and the left thin line remains solid yellow. The LaneSense indicator changes from solid yellow to flashing yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Changing LaneSense Status • Use of the turn signal suppresses the warnings. The LaneSense system settings can be configured • The system will not apply torque to the steering wheel through the Uconnect® system screen. whenever a safety system engages. (anti-lock brakes, traction control system, electronic stability control, Follow these steps to change the LaneSense settings: forward collision warning, etc.) 1.
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® can be active only when the gear selector is in REVERSE or DRIVE. If ParkSense® is enabled at one of these gear selector positions, the system will remain active until the vehicle speed is increased to approximately 7 mph (11 km/h) or above. The system will become active again if the vehicle speed is decreased to speeds less than approximately 6 mph (9 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 ParkSense® Display Rear Park Assist the display will show the single arc moving closer to the vehicle and the tone will change from fast to continuous. When the vehicle is in REVERSE, the DID will display the park assist ready system status. 3 The system will indicate a detected obstacle by showing a single arc in one or more regions based on the obstacle’s distance and location relative to the vehicle.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Slow Tone/Solid Arc Slow Tone/Solid Arc
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 3 Fast Tone/Flashing Arc Fast Tone/Flashing Arc
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 WARNING ALERTS 59-47 in 47-39 in (150-120 (120-100 cm) cm) None None Rear Distance (in/cm) Arcs — Left Arcs — Center Arcs — Right Audible Alert Chime Greater than 79 in (200 cm) None 79-59 in (200-150 cm) None 6th Solid 5th Solid 4th Solid None None None None 3rd Flashing None None Radio Volume Reduced No Single 1/2Second Tone (for rear center only) Yes Slow (for rear center only) Yes Slow (for rear center only) Yes Fast (for rear center onl
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: ParkSense® will reduce the volume of the radio, If an obstacle is detected in the left and/or right front region, the display will show a single flashing arc in the if on, when the system is sounding an audio tone. left and/or right front region and will produce a fast Front Park Assist sound tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 3 Fast Tone/Flashing Arc Continuous Tone/Flashing Arc
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 Front Park Assist Audible Alerts Enabling And Disabling ParkSense® ParkSense® will turn off the Front Park Assist audible ParkSense® can be enabled and disabled with the alert (chime) after approximately three seconds when an ParkSense® switch, located on the switch panel below obstacle has been detected, the vehicle is stationary, and the Uconnect® display. brake pedal is applied.
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Service The ParkSense® Park Assist System During vehicle start up, when the ParkSense® System has detected a faulted condition, the instrument cluster will actuate a single chime, once per ignition cycle, and it will display the #PARKSENSE UNAVAILABLE WIPE REAR SENSORS#, #PARKSENSE UNAVAILABLE WIPE FRONT SENSORS#, or the #PARKSENSE UNAVAILABLE SERVICE REQUIRED# message for five seconds.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 • When you move the gear selector to the REVERSE position and ParkSense® is turned off, the instrument Clean the ParkSense® sensors with water, car wash soap cluster will display “PARKSENSE OFF” for as long as and a soft cloth. Do not use rough or hard cloths. Do not the vehicle is in REVERSE. scratch or poke the sensors. Otherwise, you could damage the sensors. • ParkSense®, when on, will reduce the volume of the radio when it is sounding a tone.
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system misinterpreting a close object as a sensor problem, causing the “PARKSENSE UNAVAILABLE SERVICE REQUIRED” message to be displayed in the instrument cluster. CAUTION! • ParkSense® is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 WARNING! (Continued) • Before using ParkSense®, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles because the hitch ball will be much closer to the obstacle than the rear fascia when the loudspeaker sounds the continuous tone.
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the Vehicle is shifted out of Reverse (with camera Different colored zones indicate the distance to the rear of delay turned OFF) the rear camera mode is exited and the the vehicle. last touchscreen appears again. The following table shows the approximate distances for When enabled, active guide lines are overlaid on the each zone: image to illustrate the width of the vehicle and its projected backup path based on the steering wheel position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 WARNING! CAUTION! Drivers must be careful when backing up even when using the ParkView® Rear Back Up Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death.
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE Front Map/Reading Lights — If Equipped The overhead console contains courtesy/reading lights and storage for sunglasses. Universal Garage Door Opener (HomeLink®) and power sunroof switches may also be included, if equipped. Lights are mounted in the overhead console. Each light can be turned on by pushing the switch on either side of the console. These buttons are backlit for night time visibility.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 To turn the lights off, push the switch a second time. The lights also turn on when a door is opened. The lights will also turn on when the UNLOCK button on the RKE is pushed. Front Map/Reading Light Switches Courtesy Lights The courtesy lights can be turned on by pushing the top corner of the lens. To turn the lights off, push the lens a second time.
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunglasses Bin Door GARAGE DOOR OPENER — IF EQUIPPED At the front of the console a compartment is provided for the storage of a pair of sunglasses. The storage compartment access is a “push/push” design. Push the chrome pad on the door to open. Push the chrome pad on the door to close. HomeLink® replaces up to three hand-held transmitters that operate devices such as garage door openers, motorized gates, lighting or home security systems.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink® system. To erase the channels place the ignition in the ON/RUN position and push and hold the two outside HomeLink® buttons (I and III) for up 20 seconds or until the red indicator flashes.
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming A Rolling Code For programming garage door openers that were manufactured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is attached to the garage door opener. It is NOT the button that is normally used to open and close the door. The name and color of the button may vary by manufacturer. Training The Garage Door Opener 1 — Door Opener 2 — Training Button 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. Firmly push and release the “LEARN” or “TRAINING” button. On some garage door openers/devices there may be a light that blinks when the garage door opener/device is in the LEARN/TRAIN mode. 3.
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator To reprogram a channel that has been previously trained, light in view. follow these steps: 3. Push and hold the Homelink® button you want to 1. Cycle the ignition to the ON/RUN position. program while you push and hold the hand-held 2. Push and hold the desired HomeLink® button until transmitter button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 • To program the two remaining HomeLink® buttons, Canadian/Gate Operator Programming repeat each step for each remaining button. DO NOT For programming transmitters in Canada/United States erase the channels. that require the transmitter signals to “time-out” after several seconds of transmission.
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. • If the indicator light stays on constantly, programming is complete and the garage door/device should activate when the HomeLink® button is pushed. • To program the two remaining HomeLink® buttons, repeat each step for each remaining button. DO NOT erase the channels. 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 3. Without releasing the button proceed with The HomeLink® Universal Transceiver is disabled when “Canadian/Gate Operator Programming” step 2 and the Vehicle Security Alarm is active. follow all remaining steps. Troubleshooting Tips Using HomeLink® If you are having trouble programming HomeLink®, To operate, push and release the programmed here are some of the most common solutions: HomeLink® button.
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run your vehicle in the garage while programming the transceiver. Exhaust gas can cause serious injury or death. • Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 COMMANDVIEW® SUNROOF WITH POWER SHADE — IF EQUIPPED The CommandView® sunroof switch is located to the left between the sun visors on the overhead console. 3 The power shade switch is located to the right between the sun visors on the overhead console.
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Never leave children unattended in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children. Do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 movement. The sunroof and sunshade will remain in a Opening Power Shade — Express partially opened condition until the switch is pushed and Push the shade switch rearward and release it within held rearward again. one-half second and the shade will automatically open to the halfway position and stop automatically.
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Closing Power Shade — Express Venting Sunroof — Express Push the switch forward and release it within one-half second and the shade will close automatically from any position. If the sunroof is completely closed the shade will close fully and stop automatically. This is called “Express Close”. During Express Close operation, any movement of the switch will stop the shade.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 NOTE: If three consecutive sunroof close attempts result Ignition OFF Operation in Pinch Protect reversals, the fourth close attempt will be The power sunroof switch will remain active for up to a Manual Close movement with Pinch Protect disabled. approximately ten minutes after the ignition switch is turned to the LOCK position. Opening either front door Wind Buffeting will cancel this feature.
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE with a “key” are powered when the ignition switch is in the ON or ACC position, while the outlets labeled with a “battery” are connected directly to the battery and powered at all times. NOTE: • All accessories connected to the “battery” powered outlets should be removed or turned off when the vehicle is not in use to protect the battery against discharge. • To ensure proper cigar lighter operation, a MOPAR® knob and element must be used.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 In addition to the front power outlet, there is also a power NOTE: If the Media Hub is in use, do not exceed the outlet located in the storage area of the center console. maximum power of 100 Watts (8 Amps) for the center console power outlet. When the Media Hub is not in use, the outlet can deliver up to 120 Watts (10 Amps). If the power rating is exceeded, the fuse protecting the system will need to be replaced.
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The instrument panel power outlet and dual rear console USB ports can be changed to “battery” powered all the time by moving the #12 20 Amp fuse from “IGN” to “B+”. Refer to “Rear Power Distribution Center Cover” in “Rear Power Distribution Center (Fuses)”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 CAUTION! CAUTION! (Continued) • Many accessories that can be plugged in draw power from the vehicle’s battery even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly.
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Seat Cupholders The cupholders are located in the forward edge of the center console. Front Cupholders Heated And Cooled Cupholders — If Equipped Retractable Cover Your vehicle may be equipped with heated and cooled cupholders. The cupholders are designed to help keep warm beverages warm and cool beverages cool.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 WARNING! Heated And Cooled Cupholder Switches Push the “Cold” symbol once to turn on the cupholder; push the symbol a second time to turn the cupholder off. Push the “Hot” symbol once to activate the cupholder; push the symbol a second time to turn off the cupholder. When using the cupholder in the “Hot” position, avoid contact with the heated portion of the cupholder in order to reduce the possibility of burns.
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE convenient access to beverage cans or bottles while Lighted Cupholders — If Equipped maintaining a resting place for the rear occupant’s el- On some vehicles the rear cupholders are equipped with bows. a light ring that illuminates the cupholders for the rear passengers. The light ring is controlled by the Dimmer Control. Refer to “Lights” in “Understanding The Features Of Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 STORAGE Console Features There is a cubby bin located forward of the gear selector. The cubby bin is covered with a push-push actuated The glove compartment is located on the passenger side door. Push inward on the door to open it, push the door of the instrument panel. a second time to close it. Glove Compartment Two separate storage compartments are also located underneath the center console armrest.
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE small items like an ipod or phone. Below the upper tray, the lower storage compartment is made for larger items, like CDs and tissue boxes. In addition, the 12 volt power outlet, USB and Aux jack are located here. Center Console Inside the center console armrest, there is a removable upper storage tray that can be slid forward/rearward on rails for access to the lower storage area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 WARNING! Do not operate this vehicle with a console compartment lid in the open position. Driving with the console compartment lid open may result in injury in a collision. Door Storage The door panels contain storage areas.
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Seat Armrest Storage — If Equipped Cargo Area — Vehicles Equipped With 60/40 For rear passengers there is a storage bin located in the Split-Folding Rear Seat armrest. Lift upward on the latch to open the storage The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling compartment. nylon tabs between the seatbacks and the bolsters.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 WARNING! WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES Trunk Mat — If Equipped A trunk mat covers the bottom of the cargo area. The trunk mat is used to protect the interior of the trunk from mud, snow, and debris. Grocery Bag Hooks The rear cargo area is equipped with grocery bag hooks, located on either side of the rear cargo area. Grocery Bag Hooks CAUTION! Do not exceed the maximum weight limit 50 lbs (22 kg) of the grocery bag hook. Damage may occur to hook and mounting surface.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 Cargo Net REAR WINDOW FEATURES The rear cargo area is equipped with a cargo net. Rear Window Defroster The rear window defroster button is located on the climate control. Push this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 10 minutes.
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 The power sunshade can also be operated by passengers in the rears seats. The power sunshade switch is located on the back of the center console between the heated seat switches. Push the switch once to raise the sunshade. Push the switch a second time to lower the sunshade. LOAD LEVELING SYSTEM — IF EQUIPPED The automatic load leveling system will provide a levelriding vehicle under most passenger and cargo loading conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ! INSTRUMENT PANEL FEATURES . . . . . . . . . .261 ! INSTRUMENT CLUSTER . . . . . . . . . . . . . . . . .262 ! INSTRUMENT CLUSTER DESCRIPTIONS . . . . .263 ! DRIVER INFORMATION DISPLAY (DID) . . . . .272 ▫ Engine Oil Life Reset . . . . . . . . . . . . . . . . . .274 ▫ DID Selectable Menu Items . . . . . . . . . . . . . .274 ! SETTING THE ANALOG CLOCK . . . . . . . . . . .277 ! Uconnect® SETTINGS . . . . . . . . . . . . . . . . . . .277 ▫ Buttons On The Faceplate.
260 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Dual Zone Automatic Climate Controls With Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . .304 ▫ Climate Control Functions . . . . . . . . . . . . . . .309 ▫ Automatic Temperature Control (ATC) . . . . . .311 ▫ Operating Tips . . . . . . . . . . . . . . . . . . . . . . .312 ! Uconnect® VOICE RECOGNITION QUICK TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316 ▫ Introducing Uconnect® . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 261 INSTRUMENT PANEL FEATURES 4 1 — Air Outlet 7 — Glove Compartment 2 — Driver Information Display (DID) Con- 8 — Uconnect® System Hard Controls trols 3 — Driver Information Display (DID) 9 — Switch Bank 4 — Speed Controls 10 — Climate Control Hard Controls 5 — Uconnect® System 11 — Engine Start/Stop Button 6 — Analog Clock 12 — Trunk Release Button 13 — Headlight Switch 14 — Adaptive Cruise Control 15 —Uconnect® Phone Controls
262 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 263 INSTRUMENT CLUSTER DESCRIPTIONS 1. Tachometer This gauge measures engine revolutions-per-minute (RPM x 1000). 2. High Beam Indicator This indicator shows that the high beam headlights are on. Push the multifunction lever forward to switch the headlights to high beam, and pull toward yourself (normal position) to return to low beam. 3.
264 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level conditions. The vehicle should have service performed, and the brake fluid level checked. Operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately two seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 dealer as soon as possible. Refer to “Occupant Restraints” the repair/service, so that you can be sure that it is in “Things To Know Before Starting Your Vehicle” for properly reset, or that the door jamb sticker is accurate if further information. the odometer must be reset at zero. The DID features an interactive display. Refer to “Driver Information Display (DID)” in this section for further The odometer display shows the total distance the veinformation.
266 UNDERSTANDING YOUR INSTRUMENT PANEL 8. Tire Pressure Monitoring Telltale Light — If Equipped reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle, to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. sensor to become inoperable.
268 UNDERSTANDING YOUR INSTRUMENT PANEL 11. Electronic Stability Control (ESC) Activation/ NOTE: Malfunction Indicator Light — If Equipped • The “ESC Off Indicator Light” and the “ESC Activation/Malfunction Indicator Light” come on The “ESC Activation/Malfunction Indicator momentarily each time the ignition switch is turned Light” in the instrument cluster will come on to ON/RUN. when the ignition switch is turned to the ON/RUN position.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 on, a continuous chime will sound to alert you to turn the If the ABS light is on, the brake system should be serviced signals off. If either indicator flashes at a rapid rate, check as soon as possible to restore the benefits of Anti-Lock for a defective outside light bulb. brakes. If the ABS light does not turn on when the ignition switch is turned to the ON/RUN position, have 13. Rear Fog Light Indicator the light inspected by an authorized dealer.
270 UNDERSTANDING YOUR INSTRUMENT PANEL The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 19. Vehicle Security Light — If Equipped This light will flash at a fast rate for approximately 15 seconds, when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed. 20. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an Onboard Diagnostic system, called OBD, that monitors engine and automatic transmission control systems.
272 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by The Driver Information Display (DID) features an inter- pushing the following buttons mounted on the steering active display which is located in the instrument cluster. wheel: DRIVER INFORMATION DISPLAY (DID) This system conveniently allows the driver to select a variety of useful information by pushing the arrow buttons located on the left side of the steering wheel.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 Up And Down Arrow Buttons: NOTE: Using the Up or Down arrows allows you to • Holding the Up/Down or Left/Right arrow buttons cycles through the Main Menu Items. will loop the user through the currently selected menu or options presented on the screen. Changes the Main Screen area and Menu Title area. • Main menu and submenu’s wrap for continuous scrolling.
274 UNDERSTANDING YOUR INSTRUMENT PANEL • Within each submenu layer, the up/down arrows will chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system allow the user to select the item of interest. is duty cycle based, which means the engine oil change • Pushing the OK button makes the selection and a interval may fluctuate, dependent upon your personal confirmation screen will appear (returning the user to driving style. the 1st page of the submenu).
UNDERSTANDING YOUR INSTRUMENT PANEL 275 Speedometer Driver Assist Push and release the OK button to toggle between MPH Fuel Economy and km/h. Push and release the UP or DOWN arrow button until Vehicle Info the Fuel Economy Menu item is highlighted in the DID.
276 UNDERSTANDING YOUR INSTRUMENT PANEL Trip Info Stored Messages Push and release the UP or DOWN arrow button until the Trip Menu item is highlighted in the DID (Toggle left or right to select Trip A or Trip B). The Trip information will display the following: Push and release the UP or DOWN arrow button until the Messages Menu item is highlighted in the DID. This feature shows the number of stored warning messages. Pushing the RIGHT arrow button will allow you to see what the stored messages are.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 SETTING THE ANALOG CLOCK Uconnect® SETTINGS To set the analog clock at the top center of the instrument The Uconnect® system uses a combination of buttons on panel, push and hold the button until the setting is the touchscreen and buttons on the faceplate located on correct. the center of the instrument panel that allows you to access and change the customer programmable features.
278 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons On The Faceplate Buttons on the faceplate are located below the Uconnect® system in the center of the instrument panel. In addition, there is a Scroll/Enter control knob located on the right side. Turn the control knob to scroll through menus and change settings (i.e., 30, 60, 90), push the center of the control knob one or more times to select or change a setting (i.e., ON, OFF).
UNDERSTANDING YOUR INSTRUMENT PANEL 279 Engine Off Options, Audio, Phone/Bluetooth®, SiriusXM Setup, Restore Settings, Clear Personal Data Buttons on the touchscreen are accessible on the and System Information. Uconnect® Touchscreen. NOTE: Buttons On The Touchscreen CAUTION! Do not attach any object to touchscreen, doing so can result in damage to the touchscreen. Customer Programmable Features — Uconnect® 8.
280 UNDERSTANDING YOUR INSTRUMENT PANEL the touchscreen to close out of the settings screen. Pressing the Up or Down Arrow button on the right side of the screen will allow you to toggle up or down through the available settings. • Display Brightness With Headlights ON When in this display, you may select the brightness with the headlights on.
UNDERSTANDING YOUR INSTRUMENT PANEL 281 NOTE: To make changes to the #Display Brightness with appears next to the language, showing that setting has Headlights OFF# setting, the headlights must be off and been selected. Press the back arrow button on the touchthe interior dimmer switch must not be in the #party# or screen to return to the previous menu. #parade# positions.
282 UNDERSTANDING YOUR INSTRUMENT PANEL appears next to the setting, showing that setting has been Units selected. Press the back arrow button on the touchscreen After pressing the “Units” button on the touchscreen you to return to the previous menu. may select each unit of measure independently displayed in the Driver Information Display (DID), and navigation • Navigation Turn-By-Turn In Cluster — If Equipped system (if equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL 283 • Temperature • Show Command List When in this display, you may change the Show Command List settings. To change the Show Command List After the desired setting has been selected, press the back settings, press the “Always,” “With Help” or “Never” arrow button on the touchscreen to return to the previous button on the touchscreen until a check-mark appears menu. next to the setting, showing that setting has been selected.
284 UNDERSTANDING YOUR INSTRUMENT PANEL setting has been selected. Press the back arrow button on • Time Format the touchscreen to return to the previous menu. This feature will allow you to select the time format • Set Time Hours display setting. Press the “Time Format” button on the This feature will allow you to adjust the hours. The “Sync touchscreen until a check-mark appears next to the 12hrs time with GPS” button on the touchscreen must be or 24hrs setting, showing that setting has been selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 285 For further information, refer to “Adaptive Cruise ConAfter pressing the “Safety & Driving Assistance” button trol (ACC)” in “Understanding The Features Of Your on the touchscreen the following settings will be avail- Vehicle”.
286 UNDERSTANDING YOUR INSTRUMENT PANEL For further information, refer to “Lane Departure Warning (LDW)” in “Understanding The Features Of Your When this feature is selected, it sets the distance at which Vehicle”. the steering wheel will provide feedback for potential lane departures. The LDW sensitivity can be set to • Steering Feel Options — If Equipped provide either an “Early,” “Medium,” or “Late” warning The Steering Feel Options feature will allow you to adjust zone start point.
UNDERSTANDING YOUR INSTRUMENT PANEL 287 on the touchscreen, until a check-mark appears next to setting, indicating that the setting had been selected. The ParkSense® system will scan for objects behind the Press the back arrow button on the touchscreen to return vehicle when the transmission shift lever is in REVERSE to the previous menu. ParkSense® will retain its last and the vehicle speed is less than 11 mph (18 km/h). It known configuration state through ignition cycles.
288 UNDERSTANDING YOUR INSTRUMENT PANEL • Tilt Side Mirrors In Reverse When “Lights & Chime” mode is activated, the Blind Spot Monitor (BSM) will show a visual alert in the exterior mirrors as well as an audible alert when the turn signal is on. When “Off” is selected, the Blind Spot Monitor (BSM) system is deactivated. To change the Blind Spot Alert status, press the “Off,” “Lights” or “Lights & Chime” button on the touchscreen. Then press the back arrow button on the touchscreen.
UNDERSTANDING YOUR INSTRUMENT PANEL 289 display whenever the shift lever is put into REVERSE. The image will be displayed on the radio touchscreen display along with a caution note to “check entire surroundings” across the top of the screen. After five seconds, this note will disappear. To make your selection, press the “ParkView Backup Camera Active Guidelines” button on the touchscreen, until a check-mark appears next to setting, indicating that the setting had been selected.
290 UNDERSTANDING YOUR INSTRUMENT PANEL your desired time interval, and choose either 0 sec, 30 sec, 60 sec or 90 seconds. Press the back arrow button on the When this feature is selected, the Hill Start Assist (HSA) touchscreen to return to the previous menu, or push the system is active. Refer to “Electronic Brake Control back button on the faceplate. System” in “Starting And Operating” for system function and operating information.
UNDERSTANDING YOUR INSTRUMENT PANEL 291 turned off if they were turned on by this feature. To make your selection, press the “Headlights With Wipers” button on the touchscreen, until a check-mark appears next to setting, indicating that the setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu, or push the back button on the faceplate.
292 UNDERSTANDING YOUR INSTRUMENT PANEL selected. Press the back arrow button on the touchscreen • Flash Lights With Lock to return to the previous menu, or push the back button When this feature is selected, the exterior lights will flash on the faceplate. when the doors are locked or unlocked with the Remote Doors & Locks Keyless Entry (RKE) transmitter, or when using the After pressing the “Doors & Locks” button on the touch- passive entry feature.
UNDERSTANDING YOUR INSTRUMENT PANEL 293 • Sound Horn With Remote Start When this feature is selected, the horn will sound when the remote start is activated. To make your selection, press the “Sound Horn with Remote Start” button on the touchscreen until a check-mark appears next to setting, showing that setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu.
294 UNDERSTANDING YOUR INSTRUMENT PANEL setting, showing that the setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu. Refer to “Keyless Enter-N-Go™” in “Things To Know Before Starting Your Vehicle”.
UNDERSTANDING YOUR INSTRUMENT PANEL 295 Vehicle Start” button to select from “Off,” “Remote Start” or “All Starts” until a check-mark appears next to setting, showing that setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu.
296 UNDERSTANDING YOUR INSTRUMENT PANEL press the “+” or “–” button on the touchscreen to select your the scale between the “+” and “–” buttons on the desired time interval. Press the back arrow button on the touchscreen. Press the back arrow button on the touchscreen to return to the previous menu. touchscreen to return to the previous menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 297 button on the touchscreen, select “On” or “Off.” Press the Phone/Bluetooth® back arrow button on the touchscreen to return to the After pressing the “Phone/Bluetooth®” button on the previous menu. touchscreen the following settings will be available: • AUX Volume Offset — If Equipped • Paired Phones This feature provides the ability to tune the audio level for portable devices connected through the AUX input.
298 UNDERSTANDING YOUR INSTRUMENT PANEL Press the “Subscription Info” button on the touchscreen After pressing the “SiriusXM Setup” button on the touch- to access the Subscription Information screen. screen, the following settings will be available: Write down the SIRIUS ID numbers for your receiver. To reactivate your service, either call the number listed on • Channel Skip the screen or visit the provider online.
UNDERSTANDING YOUR INSTRUMENT PANEL 299 select “Yes” to restore, or “Cancel” to exit. Once the System Information settings are restored, a pop up appears stating #settings After pressing the “System Information” button on the reset to default.# Press the okay button on the touchscreen touchscreen the following information will be available: to exit.
300 UNDERSTANDING YOUR INSTRUMENT PANEL iPod®/USB/MP3 CONTROL This feature allows an iPod® or an external USB device to be plugged into the USB port. iPod® control supports Mini, 4G, Photo, Nano, 5G iPod® and iPhone® devices. Some iPod® software versions may not fully support the iPod® control features. Please visit Apple’s website for software updates. The Media hub also allows the use of an SD card. For further information, refer to the Uconnect® Supplement Manual.
UNDERSTANDING YOUR INSTRUMENT PANEL 301 STEERING WHEEL AUDIO CONTROLS The remote sound system controls are located on the rear surface of the steering wheel at the three and nine o’clock positions. 4 Rear USB Charging Ports The USB “Charge Only” ports will recharge battery operated USB devices when connected.
302 UNDERSTANDING YOUR INSTRUMENT PANEL The right-hand control is a rocker-type switch with a push-button in the center and controls the volume and mode of the sound system. Pushing the top of the rocker switch will increase the volume, and pushing the bottom of the rocker switch will decrease the volume. The button located in the center of the left-hand control will tune to the next preset station that you have programmed in the radio preset button.
UNDERSTANDING YOUR INSTRUMENT PANEL 303 antenna, it is recommended that the radio volume be turned down or off during mobile phone operation when 7. Do not store the disc where temperatures may become not using Uconnect® (if equipped). too high. NOTE: If you experience difficulty in playing a particular CLIMATE CONTROLS 6. Do not expose the disc to direct sunlight. disc, it may be damaged (e.g.
304 UNDERSTANDING YOUR INSTRUMENT PANEL Dual Zone Automatic Climate Controls With Touchscreen Buttons On The Faceplate Buttons On The Touchscreen Buttons on the touchscreen are accessible on the Uconnect® system screen. The buttons on the faceplate are located below the Uconnect® screen. Uconnect® 8.
UNDERSTANDING YOUR INSTRUMENT PANEL 305 Button Descriptions (Applies To Both Buttons On The 4. AUTO Operation Button Faceplate And Buttons On The Touchscreen) Automatically controls the interior cabin temperature by 1. MAX A/C Button adjusting airflow distribution and amount. Performing Press and release to change the current setting, the this function will cause the system to switch between indicator illuminates when MAX A/C is ON. Performing manual mode and automatic modes.
306 UNDERSTANDING YOUR INSTRUMENT PANEL 6. Rear Defrost Button Press and release this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after 10 minutes. CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window.
UNDERSTANDING YOUR INSTRUMENT PANEL 307 8. Passenger Temperature Control Down Button Provides the passenger with independent temperature control. Push the button on the faceplate for cooler temperature settings or on the touchscreen, press and slide the temperature bar button towards the blue arrow for cooler temperature settings. 10. Blower Control Blower control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available.
308 UNDERSTANDING YOUR INSTRUMENT PANEL Button On The Touchscreen Use the small blower icon to reduce the blower setting and the large blower icon to increase the blower setting. Blower can also be selected by pressing the blower bar area between the icons. 11. Modes direction. There is a shut off wheel located below the air vanes to shut off or adjust the amount of airflow from these outlets. • Bi-Level Mode Air comes from the instrument panel outlets and floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 309 • Mix Mode Air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. 12. Climate Control OFF Button 14. Driver Temperature Control Up Button Provides the driver with independent temperature control. Push the button on the faceplate for warmer temperature settings or on the touchscreen, press and slide the temperature bar button towards the red arrow for warmer temperature settings.
310 UNDERSTANDING YOUR INSTRUMENT PANEL adjust the blower and airflow mode settings. Also, make Press and release to toggle between MAX A/C and the sure to select only Panel, Bi-Level or Floor modes. prior settings. The button illuminates when MAX A/C is ON. NOTE: In MAX A/C, the blower level and mode position can be • If fog or mist appears on the windshield or side glass, adjusted to desired user settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 311 NOTE: In cold weather, use of recirculation mode may 2. Next, adjust the temperature you would like the system to maintain by adjusting the driver and paslead to excessive window fogging. The recirculation senger temperature control buttons. Once the desired feature may be unavailable (button on the touchscreen temperature is displayed, the system will achieve and greyed out) if conditions exist that could create fogging automatically maintain that comfort level.
312 UNDERSTANDING YOUR INSTRUMENT PANEL To provide you with maximum comfort in the Automatic mode, during cold start-ups the blower fan will remain on low until the engine warms up. The blower will increase in speed and transition into Auto mode. The operator can also select the direction of the airflow by selecting one of the available mode settings. A/C operation and Recirculation control can also be manually selected in Manual operation.
UNDERSTANDING YOUR INSTRUMENT PANEL 313 Summer Operation Vacation Storage The engine cooling system must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating. A solution of 50% OAT (Organic Additive Technology) coolant that meets the requirements of Chrysler Material Standard MS.90032 and 50% water is recommended. Refer to “Maintenance Procedures” in “Maintaining Your Vehicle” for proper coolant selection.
314 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes objectionable, increase blower speed to improve airflow and clearing of the side windows. Vehicle windows tend to fog on the inside in mild but rainy or humid weather.
UNDERSTANDING YOUR INSTRUMENT PANEL 315 Manual Control Setting Suggestions for Various Weather Conditions 4
316 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® VOICE RECOGNITION QUICK TIPS Introducing Uconnect® Start using Uconnect® Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect® 5.0 or 8.4A/8.4AN system. Uconnect® 8.4AN If you see the icon on your touchscreen, you have the Uconnect® 8.4AN system. If not, you have a Uconnect® 8.4A system.
UNDERSTANDING YOUR INSTRUMENT PANEL 317 Get Started All you need to control your Uconnect® system with your voice are the buttons on your steering wheel. 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing instructions. 4 2. Reduce background noise. Wind and passenger conversations are examples of noise that may impact recognition. 3. Speak clearly at a normal pace and volume while facing straight ahead.
318 UNDERSTANDING YOUR INSTRUMENT PANEL Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect® system. Push the VR button . After the beep, say: • Cancel to stop a current voice session • Help to hear a list of suggested Voice Commands • Repeat to listen to the system prompts again Notice the visual cues that inform you of your voice recognition system’s status. Cues appear on the touchscreen. Uconnect® 8.4A/8.
UNDERSTANDING YOUR INSTRUMENT PANEL 319 Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like to hear. (Subscription or included SiriusXM Satellite Radio trial required.) Push the VR button . After the beep, say: 4 • Tune to ninety-five-point-five FM • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, push the VR button and say “Help.” The system will provide you with a list of commands.
320 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Press the Browse button on the touchscreen to see all of the music on your iPod® or USB device. Your Voice Uconnect® offers connections via USB, SD, Bluetooth® Command must match exactly how the artist, album, and auxiliary ports (If Equipped). Voice operation is only song and genre information is displayed. available for connected USB and iPod® devices. (Remote CD player optional and not available on all vehicles.) Media .
UNDERSTANDING YOUR INSTRUMENT PANEL 321 Phone Making and answering hands-free phone calls is easy with Uconnect®. When the Phonebook button is illuminated on your touchscreen, your system is ready. Check UconnectPhone.com for mobile phone compatibility and pairing instructions. TIP: When providing a Voice Command, push the Phone button and say “Call,” then pronounce the name exactly as it appears in your phone book. When a contact has multiple phone numbers, you can say “Call John Smith work.” 4 .
322 UNDERSTANDING YOUR INSTRUMENT PANEL Voice Text Reply Uconnect® will announce incoming text messages. Push and say Listen. (Must have comthe Phone button patible mobile phone paired to Uconnect® system.) 1. Once an incoming text message is read to you, push . After the beep, say: “Reply.” the Phone button 2. Listen to the Uconnect® prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts. PRE-DEFINED VOICE TEXT REPLY RESPONSES Yes. Stuck in Traffic. See you later.
UNDERSTANDING YOUR INSTRUMENT PANEL 323 Climate (8.4A/8.4AN) Too hot? Too cold? Adjust vehicle temperatures handsfree and keep everyone comfortable while you keep moving ahead. (If vehicle is equipped with climate control.) . After the beep, say one of the Push the VR button following commands: 4 • Set driver temperature to 70 degrees • Set passenger temperature to 70 degrees TIP: Voice Command for Climate may only be used to adjust the interior temperature of your vehicle.
324 UNDERSTANDING YOUR INSTRUMENT PANEL Navigation (8.4A/8.4AN) The Uconnect® navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go. (Navigation is optional on the Uconnect® 8.4A system. See your dealer to activate navigation at any time.) 1. To enter a destination, push the VR button the beep, say: . After • For the 8.4A Uconnect® System, say: “Enter state.” • For the 8.
UNDERSTANDING YOUR INSTRUMENT PANEL 325 press the Apps button on the 8.4-inch touchscreen to get started. Detailed registration instructions can be found on the next page. Roadside Assistance Call Wi-Fi Hotspot*** **If vehicle is equipped. NOTE: Uconnect® Access is available only on equipped vehicles purchased within the continental United States ***Extra charges apply. and Alaska. Services can only be used where coverage is Register (8.4A/8.4AN) available; see coverage map for details. 1.
326 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Click on the link inside the email within 72 hours and complete the easy online registration process to create a personal Mopar® Owner Connect account linked to your vehicle. Mobile App (8.4A/8.4AN) Securely link your mobile device to your vehicle with the Uconnect® Access App. Once you have downloaded the App, you may start your vehicle or lock it from virtually any distance. (Vehicle must be properly equipped with factory-installed Remote Start.
UNDERSTANDING YOUR INSTRUMENT PANEL 327 Download the Uconnect® Access App to a compatible 2. Listen to the prompt. After the beep, dictate the Apple® or Android® mobile devices. All you need to do message you would like to send. Wait for Uconnect® is: to process your message. 1. After registering with Uconnect® Access, log on to 3. The Uconnect® system will repeat your message and your Mopar® Owner Connect account at provide a variety of options to add to, delete, send or moparownerconnect.com.
328 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Once you perform a search, you can reorganize the results by selecting either the Best Match, Rating or Once registered with Uconnect® Access, you can use Distance tab on the top of the touchscreen display. your voice to search for the most popular places or things around you. Yelp® (8.4A/8.4AN) 1. Press the “Apps” button on the touchscreen. 2. Press the “All Apps” button on the touchscreen. 3. Press the “Yelp” button on the touchscreen. 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 329 SiriusXM Travel Link™ (8.4A/8.4AN) Need to find a gas station, view local movie listings, check a sports score or the 5 - day weather forecast? SiriusXM Travel Link™ is a suite of services that brings a wealth of information right to your Uconnect® 8.4AN system. (Not available for 8.4A system.) 4 .
330 UNDERSTANDING YOUR INSTRUMENT PANEL General Information NOTE: This device complies with FCC rules Part 15 and Industry • The transmitter has been tested and it complies with FCC Canada RSS-210. Operation is subject to the following and IC rules. Changes or modifications not expressly two conditions: approved by the party responsible for compliance could void the user’s authority to operate the device. 1. This device may not cause harmful interference. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 331 Additional Information Uconnect® System Support: © 2015 FCA US LLC. All rights reserved. Mopar and Uconnect are registered trademarks and Mopar Owner Connect is a trademark of FCA US LLC. Android is a trademark of Google Inc. SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc. Yelp, Yelp logo, Yelp burst and related marks are registered trademarks of Yelp. • U.S. residents call DriveUconnect.
STARTING AND OPERATING CONTENTS ! STARTING PROCEDURES . . . . . . . . . . . . . . . .337 ▫ Key Ignition Park Interlock. . . . . . . . . . . . . . .344 ▫ Automatic Transmission . . . . . . . . . . . . . . . .337 ▫ Brake/Transmission Shift Interlock System . . .344 ▫ Keyless Enter-N-Go™ . . . . . . . . . . . . . . . . . .338 ▫ Eight-Speed Automatic Transmission . . . . . . .345 ▫ Normal Starting. . . . . . . . . . . . . . . . . . . . . . .338 ! AUTOSTICK — IF EQUIPPED . . . . . . . . . . . . .
334 STARTING AND OPERATING ▫ Shallow Standing Water . . . . . . . . . . . . . . . . .357 ▫ Rain Brake Support . . . . . . . . . . . . . . . . . . . .373 ! ELECTRIC POWER STEERING . . . . . . . . . . . . .359 ▫ ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light . . . . . . . . . . . . . . . .373 ! FUEL SAVER TECHNOLOGY 5.7L ENGINE ONLY — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . .360 ▫ Synchronizing ESC . . . . . . . . . . . . . . . . . . . .375 ! PARKING BRAKE . . .
STARTING AND OPERATING 335 ▫ Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . .390 ▫ General Information . . . . . . . . . . . . . . . . . . .412 ▫ Tire Types . . . . . . . . . . . . . . . . . . . . . . . . . . .391 ! FUEL REQUIREMENTS . . . . . . . . . . . . . . . . . .413 ▫ Run Flat Tires — If Equipped . . . . . . . . . . . . .393 ▫ 3.6L Engine — If Equipped. . . . . . . . . . . . . . .413 ▫ Spare Tires — If Equipped . . . . . . . . . . . . . . .393 ▫ 5.7L Engine — If Equipped. . . . . . .
336 STARTING AND OPERATING ▫ E-85 General Information . . . . . . . . . . . . . . .417 ▫ Gross Axle Weight Rating (GAWR) . . . . . . . . .425 ▫ Ethanol Fuel (E-85) . . . . . . . . . . . . . . . . . . . .418 ▫ Overloading . . . . . . . . . . . . . . . . . . . . . . . . .425 ▫ Fuel Requirements . . . . . . . . . . . . . . . . . . . .418 ▫ Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . .426 ▫ Selection Of Engine Oil For Flexible Fuel Vehicles ! TRAILER TOWING . . . . . . . . . . . . . . .
STARTING AND OPERATING 337 STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always make sure the ignition is in the OFF position, remove the Key Fob from the vehicle, and lock the vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
338 STARTING AND OPERATING CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal.
STARTING AND OPERATING 339 4. If you wish to stop the cranking of the engine prior to the engine starting, push the button again. NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. To Turn Off The Engine Using ENGINE START/STOP Button position. If the shift lever/gear selector is not in PARK and the ENGINE START/STOP button is pushed once, the DID will display a “Vehicle Not In Park” message and the engine will remain running.
340 STARTING AND OPERATING To change the ignition switch positions without starting If Engine Fails To Start the vehicle and use the accessories follow these steps: 1. Starting with the ignition in the OFF position: 2. Push the ENGINE START/STOP button once to change the ignition to the ACC position. 3. Push the ENGINE START/STOP button a second time to change the ignition to the RUN position. 4. Push the ENGINE START/STOP button a third time to return the ignition to the OFF position.
STARTING AND OPERATING 341 WARNING! (Continued) • If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done improperly. Refer to “Jump-Starting” in “What To Do In Emergencies” for further information. Clearing A Flooded Engine (Using ENGINE START/STOP Button) 2. Press the accelerator pedal all the way to the floor and hold it. 3.
342 STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded, three-wire extension cord. The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine. The engine block heater cord is routed under the hood on the driver side of the vehicle.
STARTING AND OPERATING 343 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, turn the engine OFF, and remove the Key Fob. When the ignition is in the OFF position, the transmission is locked in PARK, securing the vehicle against unwanted movement.
344 STARTING AND OPERATING CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into or out of PARK or REVERSE only after the vehicle has come to a complete stop. • Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly pressing the brake pedal. before the engine can be turned off.
STARTING AND OPERATING 345 Eight-Speed Automatic Transmission The transmission is controlled using a rotary electronic gear selector located on the center console. The transmission gear range (PRNDL/S) is displayed both above the gear selector and in the Driver Information Display (DID). To select a gear range, simply rotate the gear selector. To access the L or S position, push down on the gear selector and then rotate it.
346 STARTING AND OPERATING Standard Shifter Premium Shifter With AutoStick The standard transmission gear selector has PARK, REVERSE, NEUTRAL, DRIVE, and LOW shift positions. Using the LOW position manually downshifts the transmission to a lower gear based on vehicle speed. The premium transmission gear selector provides PARK, REVERSE, NEUTRAL, DRIVE, and SPORT shift positions. Manual shifts can be made using the AutoStick shift control (shift paddles mounted on the steering wheel).
STARTING AND OPERATING 347 PARK (P) This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a level surface, you may shift the transmission into PARK first, and then apply the parking brake. When parking on a hill, apply the parking brake before shifting the transmission to PARK.
348 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, turn the engine OFF, and remove the key fob. When the ignition is in the OFF position, the transmission is locked in PARK, securing the vehicle against unwanted movement.
STARTING AND OPERATING 349 NOTE: REVERSE (R) • Before moving the transmission gear selector out of This range is for moving the vehicle backward. Shift into PARK, you must start the engine and also press the REVERSE only after the vehicle has come to a complete brake pedal. Otherwise, damage to the gear selector stop. could result.
350 STARTING AND OPERATING CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause severe transmission damage. Refer to “Recreational Towing” in “Starting And Operating” and “Towing A Disabled Vehicle” in “What To Do In Emergencies” for further information. DRIVE (D) This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy.
STARTING AND OPERATING 351 access SPORT mode, push down on the gear selector and greatest amount of steering feel. This mode may be rotate it fully clockwise, or press the SPORT button in the activated and deactivated by pushing the Sport button on the instrument panel switch bank. center stack. LOW (L) — If Equipped Transmission Limp Home Mode Use this range for engine braking when descending very steep grades. In this range, the transmission will downshift for increased engine braking.
352 STARTING AND OPERATING In the event of a momentary problem, the transmission 6. Shift into the desired gear range. If the problem is no can be reset to regain all forward gears by performing the longer detected, the transmission will return to normal following steps: operation. NOTE: In cases where the instrument cluster message indicates the transmission may not re-engage after engine shutdown, perform this procedure only in a desired location (preferably, at your authorized dealer). 1.
STARTING AND OPERATING 353 can also provide you with more control during passing, lower gear, while using (+) to enter AutoStick will retain city driving, cold slippery conditions, mountain driving, the current gear. When AutoStick is active, the current trailer towing, and many other situations. transmission gear is displayed in the instrument cluster.
354 STARTING AND OPERATING • If AutoStick is engaged while the transmission gear • If a requested downshift would cause the engine to selector is in the SPORT position, manual gear selecover-speed, that shift will not occur. tion will be maintained until the gear selector is • The system will ignore attempts to upshift at too low returned to DRIVE, or as described below. The transof a vehicle speed.
STARTING AND OPERATING 355 conditions require increased levels of road traction, the vehicle automatically shifts into AWD mode. Automatic Do not downshift for additional engine braking on a AWD operation could be activated by outside temperaslippery surface. The drive wheels could lose their ture, wheel slip, or other predetermined conditions (there may be a slight delay for AWD engagement after a wheel grip and the vehicle could skid, causing a collision or slip condition occurs).
356 STARTING AND OPERATING CAUTION! WARNING! All wheels must have the same size and type tires. Unequal tire sizes must not be used. Unequal tire size may cause failure of the front differential and/or the transfer case. Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the rear wheels. You could lose control of the vehicle and possibly have a collision.
STARTING AND OPERATING 357 • Slow down if the road has standing water or puddles. Flowing/Rising Water • Replace tires when tread wear indicators first become visible. • Keep tires properly inflated. • Maintain sufficient distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop. Your vehicle may be equipped with a Limited Slip Differential (LSD) that reduces, but does not eliminate, the amount of wheel slip across a given axle for improved handling.
358 STARTING AND OPERATING WARNING! CAUTION! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
STARTING AND OPERATING 359 CAUTION! (Continued) • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
360 STARTING AND OPERATING WARNING! Continued operation with reduced assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. If the Steering icon is displayed and the “SERVICE POWER STEERING” or the “POWER STEERING ASSIST OFF – SERVICE SYSTEM” message is displayed within the Driver Information Display (DID), this indicates the vehicle needs to be taken to the dealer for service.
STARTING AND OPERATING 361 PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied and place the shift lever/gear selector in the PARK position. The foot operated parking brake is located below the lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully. To release the parking brake, press the park brake pedal a second time and let your foot up as you feel the brake disengage.
362 STARTING AND OPERATING NOTE: • When the parking brake is applied and the transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied. It does not show the degree of brake application.
STARTING AND OPERATING 363 WARNING! (Continued) CAUTION! • Do not leave the Key Fob in or near the vehicle (or in a location accessible to children), and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode. A child could operate power windows, other controls, or move the vehicle. • Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a collision.
364 STARTING AND OPERATING In the event power assist is lost for any reason (for example, repeated brake applications with the engine OFF) the brakes will still function. The effort required to brake the vehicle will be much greater than that required with the power system operating. NOTE: Your vehicle is equipped with a high performance braking system. The brake pads are a semimetallic compound, which offer superior fade resistance for consistent operation.
STARTING AND OPERATING 365 related motor noises. These noises are the system per- These are all normal characteristics of ABS. forming its self check cycle to ensure that the ABS is working properly. This self check occurs each time the WARNING! vehicle is started and accelerated past 7 mph (11 km/h). • The ABS contains sophisticated electronic equipABS is activated during braking under certain road or ment that may be susceptible to interference stopping conditions.
366 STARTING AND OPERATING WARNING! (Continued) • The ABS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning.
STARTING AND OPERATING 367 Brake Assist System (BAS) This system complements the ABS by optimizing the vehicle braking capability during emergency brake maneuvers. This system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances.
368 STARTING AND OPERATING power may also be reduced to assist in counteracting the condition of oversteer or understeer and help the vehicle maintain the desired path. The ESC uses sensors in the vehicle to determine the path that the driver intends to steer the vehicle and compares it to the actual path of the vehicle. When the actual path does not match the intended path, the ESC applies the brake of the appropriate wheel to assist in counteracting the condition of oversteer or understeer.
STARTING AND OPERATING 369 The “ESC Off” switch is located on the switch bank in the The ESC system has two or three available operating center of the instrument panel. To enter the “Partial Off” mode, momentarily push the “ESC Off” switch and the modes: #ESC off indicator light# will illuminate. To turn the ESC ESC On on again, momentarily push the “ESC Off” switch and This is the normal operating mode for the ESC. When- the #ESC off indicator light# will turn off.
370 STARTING AND OPERATING NOTE: • To improve the vehicle’s traction when driving with snow chains, or when starting off in deep snow, sand, or gravel, it may be desirable to switch to the “Partial Off” mode by momentarily pushing the “ESC Off” switch. Once the situation requiring “Partial Off” mode is overcome, turn the ESC on again by momentarily pushing the “ESC Off” switch. This may be done while the vehicle is in motion.
STARTING AND OPERATING 371 WARNING! In the ESC “Full Off” mode, the engine torque reduction and stability features are disabled. Therefore, the enhanced vehicle stability offered by ESC is unavailable. In an emergency evasive maneuver, the ESC system will not engage to assist in maintaining stability. $ESC Off$ mode is intended for off-highway or off-road use only. Hill Start Assist (HSA) The HSA system is designed to assist the driver when starting a vehicle from a stop on a hill.
372 STARTING AND OPERATING WARNING! WARNING! (Continued) There may be situations on minor hills with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling may occur. This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking the vehicle.
STARTING AND OPERATING 373 HSA Off Rain Brake Support If you wish to turn off the HSA system, it can be done in the Uconnect® Settings. Refer to #Uconnect® Settings# in #Understanding Your Instrument Panel# for further information. Rain Brake Support may improve braking performance in wet conditions. It will periodically apply a small amount of brake pressure to remove any water buildup on the front brake rotors.
374 STARTING AND OPERATING malfunction has been detected in the ESC system. If this NOTE: light remains on after several ignition cycles, and the • Each time the ignition is cycled ON, the ESC system vehicle has been driven several miles (kilometers) at will be ON even if it was cycled off previously. speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem • The ESC system will make buzzing or clicking sounds diagnosed and corrected. when it is active.
STARTING AND OPERATING 375 Synchronizing ESC TIRE SAFETY INFORMATION Tire Markings If the power supply is interrupted (battery disconnected or discharged), the “ESC Activation/Malfunction Indicator Light” may illuminate with the engine running. If this should occur, turn the steering wheel completely to the left and then to the right. The “ESC Activation/ Malfunction Indicator Light” should go out.
376 STARTING AND OPERATING • Temporary spare tires are designed for temporary emergency use only. Temporary high pressure com• P (Passenger) — Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards. P-Metric tires have the letter “P” the sidewall preceding the size designation. Example: molded into the sidewall preceding the size designaT145/80D18 103M. tion. Example: P215/65R15 95H. • High flotation tire sizing is based on U.S.
STARTING AND OPERATING 377 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or $....blank....$ = Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
378 STARTING AND OPERATING EXAMPLE: R = Construction code – #R# means radial construction, or – #D# means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions – The maximum speed corresponding to the speed symbol should only be
STARTING AND OPERATING 379 EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or • C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load – Maximum load indicates the maximum load this tire is designed to carry Maximum Pressure – Maximum pressure indicates the maximum permissible cold tir
380 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S.
STARTING AND OPERATING 381 Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
382 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
STARTING AND OPERATING 383 Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. Loading Tire And Loading Information Placard The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
384 STARTING AND OPERATING NOTE: Under a maximum loaded vehicle condition, Steps For Determining Correct Load Limit gross axle weight ratings (GAWRs) for the front and rear 1. Locate the statement “The combined weight of occuaxles must not be exceeded. For further information on pants and cargo should never exceed XXX lbs or GAWRs, vehicle loading, and trailer towing, refer to XXX kg” on your vehicle’s placard. “Vehicle Loading” in this section. 2.
STARTING AND OPERATING 385 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
386 STARTING AND OPERATING
STARTING AND OPERATING 387 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
388 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Fuel Economy Underinflated tires will increase tire rolling resistance resulting in higher fuel consumption.
STARTING AND OPERATING 389 Tire Inflation Pressures The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or rear edge of the driver’s side door. At least once a month: Inflation pressures specified on the placard are always “cold tire inflation pressure”. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
390 STARTING AND OPERATING inflation pressure should be increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition. Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. Tire Pressures For High Speed Operation WARNING! High speed driving with your vehicle under maximum load is dangerous. The added strain on your tires could cause them to fail.
STARTING AND OPERATING 391 Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (Spring, Summer, Fall and Winter). Traction levels may vary • The tire has not been driven on when flat. between different all season tires.
392 STARTING AND OPERATING Summer tires do not contain the all season designation or mountain/snowflake symbol on the tire sidewall. Use Summer tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. WARNING! Do not use Summer tires in snow/ice conditions. You could lose vehicle control, resulting in severe injury or death. Driving too fast for conditions also creates the possibility of loss of vehicle control.
STARTING AND OPERATING 393 Run Flat Tires — If Equipped Spare Tires — If Equipped Run Flat tires allow you the capability to drive 50 miles NOTE: For vehicles equipped with Tire Service Kit (80 km) at 50 mph (80 km/h) after a rapid loss of inflation instead of a spare tire, please refer to “Tire Service Kit” in pressure. This rapid loss of inflation is referred to as the “What To Do In Emergencies” for further information. Run Flat mode.
394 STARTING AND OPERATING rotation for your vehicle. If your vehicle has this option, Do not install a wheel cover or attempt to mount a refer to an authorized tire dealer for the recommended conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tire. tire rotation pattern. Do not install more than one compact spare tire and Compact Spare Tire — If Equipped wheel on the vehicle at any given time. The compact spare is for temporary emergency use only.
STARTING AND OPERATING 395 your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the The full size spare is for temporary emergency use only. first opportunity. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not. This spare WARNING! tire may have limited tread life. When the tread is worn to the tread wear indicators, the temporary use full size Limited-use spares are for emergency use only.
396 STARTING AND OPERATING Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires spin your vehicle’s wheels above 30 mph (48 km/h) or to help you in determining when your tires should be for longer than 30 seconds continuously without stop- replaced. ping. Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous.
STARTING AND OPERATING 397 These indicators are molded into the bottom of the tread • Performance tires, tires with a speed rating of V or higher, and Summer tires typically have a reduced grooves. They will appear as bands when the tread depth tread life. Rotation of these tires per the vehicle mainbecomes a 1/16 of an inch (2 mm). When the tread is tenance schedule is highly recommended. worn to the tread wear indicators, the tire should be replaced.
398 STARTING AND OPERATING Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressures. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed. Refer to the paragraph on “Tread Wear Indicator”.
STARTING AND OPERATING 399 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
400 STARTING AND OPERATING • Install on Rear Tires Only. • Due to limited clearance for a Rear Wheel Drive (RWD) vehicle, on P215/65R17, P225/60R18 and P235/55R18 tires with a Security Chain Company (SCC) Super Z6 low profile traction device or equivalent is recommended. • Due to limited clearance for an All Wheel Drive (AWD) vehicle, P245/45R20 tire with the use of a traction device that meets the SAE type “Class S” specification is recommended.
STARTING AND OPERATING 401 CAUTION! (Continued) • Observe the traction device manufacturer’s instructions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufacturer’s if it is less than 30 mph (48 km/h). • Do not use traction devices on a compact spare tire. TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions.
402 STARTING AND OPERATING The suggested rotation method is the “forward cross” shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be reversed. Tire Rotation TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.5°C).
STARTING AND OPERATING 403 also increase as the vehicle is driven - this is normal and may need to be driven for up to 20 minutes above 15 mph there should be no adjustment for this increased pres- (24 km/h) in order for the TPMS to receive this informasure. tion. The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire.
404 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Using aftermarket tire sealants may cause the Tire Pressure Monitoring System (TPMS) sensor to become inoperable.
STARTING AND OPERATING 405 • Seasonal temperature changes will affect tire pressure, The matching full size spare wheel and tire assembly (if and the TPMS will monitor the actual tire pressure in equipped) has a TPM sensor. The matching full size spare can be used in place of any of the four road tires. The the tire. TPMS will only monitor the pressure in the full size spare Base System when it is used in place of a road tire.
406 STARTING AND OPERATING pressure value as shown in the #Inflate to XX# message. 2. Installing aftermarket window tinting that contains materials that may block radio wave signals. Once the system receives the updated tire pressures, the system will automatically update and the TPM Telltale 3. Accumulation of snow or ice around the wheels or Light and #LOW TIRE# message will turn off. The vehicle wheel housings.
STARTING AND OPERATING 407 3. Driving the vehicle for up to 20 minutes above 15 mph 3. After driving the vehicle for up to 20 minutes above (24 km/h) will turn off the TPM Telltale Light and 15 mph (24 km/h), the #LOW TIRE# message will turn #LOW TIRE# message as long as no tire pressure is off and the TPM Telltale Light will flash on and off for below the low-pressure warning limit in any of the 75 seconds and then remain on solid. four active road tires. 4.
408 STARTING AND OPERATING Premium System — If Equipped The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors mounted to each wheel as part of the valve stem transmit tire pressure readings to the receiver module. The matching full size spare wheel and tire assembly (if equipped) has a TPM sensor. The full size spare can be used in place of any of the four road tires.
STARTING AND OPERATING 409 will automatically update, the graphic display in the DID will stop flashing or change color back to the original color, and the TPM Telltale Light will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information.
410 STARTING AND OPERATING 2. Installing aftermarket window tinting that contains materials that may block radio wave signals. If a system fault is detected, the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid. 3. Accumulation of snow or ice around the wheels or The system fault will also sound a chime. In addition, the wheel housings. DID will display a #SERVICE TPM SYSTEM# message for a minimum of five seconds and then display dashes (- -) 4.
STARTING AND OPERATING 411 Vehicles With Full Size Spare Vehicles With Compact Spare 1. The matching full size spare wheel and tire assembly 1. The compact spare tire does not have a TPM sensor. has a TPM sensor that can be monitored by the TPMS. Therefore, the TPMS will not monitor the pressure in the compact spare tire. 2. If you install the full size spare in place of a road tire that has a pressure below the low-pressure warning 2.
412 STARTING AND OPERATING 4. For each subsequent ignition switch cycle, a chime will sound, the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid, and the DID will display a #SERVICE TPM SYSTEM# message for a minimum of five seconds and then display dashes (- -) in place of the pressure value. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada.
STARTING AND OPERATING 413 FUEL REQUIREMENTS 3.6L Engine — If Equipped Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these symptoms, try another brand of gasoline before considering service for the vehicle. This engine is designed to meet all emissions regulations and provide excellent 5.
414 STARTING AND OPERATING making a heavy knocking sound, see your dealer imme- Gasoline/Oxygenate Blends diately. Use of gasoline with an octane number lower Some fuel suppliers blend unleaded gasoline with oxythan 87 can cause engine failure and may void or not be genates such as ethanol. covered by the New Vehicle Warranty. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations.
STARTING AND OPERATING 415 E-85 Usage In Non-Flex Fuel Vehicles Non-Flex Fuel Vehicles (FFV) are compatible with gasoline containing up to 10% ethanol (E10). Gasoline with higher ethanol content may void the New Vehicle Limited Warranty. If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: • Operate in a lean mode. • OBD II “Malfunction Indicator Light” on. • Poor engine performance. • Poor cold start and cold drivability.
416 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gasoline is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat.
STARTING AND OPERATING 417 Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
418 STARTING AND OPERATING CAUTION! Only vehicles with the E-85 fuel filler door label can operate on E-85. Ethanol Fuel (E-85) Fuel Requirements If your vehicle is E-85 compatible, it will operate on unleaded gasoline with any octane rating, or solely E-85 fuel, or any mixture of these fuels. For best results, avoid fueling patterns alternating between E-85 and unleaded gasoline. E-85 is a mixture of approximately 85% ethanol and 15% When switching fuel types: unleaded gasoline.
STARTING AND OPERATING 419 Chrysler Specification MS-6395. It is recommended that engine oils that are API Certified and meet the require• Use seasonally adjusted E-85 fuel (ASTM D5798). With ments of Material Standard MS-6395 be used.
420 STARTING AND OPERATING Cruising Range CAUTION! Because E-85 fuel contains less energy per gallon/liter than gasoline, an increase in fuel consumption will be Replacing fuel system components with non-ethanol experienced. The miles per gallon (mpg)/kilometers per compatible components can damage your vehicle. liter and the driving range will decrease by approxiMaintenance mately 30%, compared to gasoline operation.
STARTING AND OPERATING 421 ADDING FUEL 1. Press the fuel filler door release switch (located in the driver’s door map pocket). 5 Fuel Filler Door Fuel Filler Door Release Switch 2. Open the fuel filler door. NOTE: In certain cold conditions, ice may prevent the fuel door from opening. If this occurs, lightly push on the fuel door to break the ice buildup and re-release the fuel door using the inside release button. Do not pry on the door.
422 STARTING AND OPERATING 3. There is no fuel filler cap. A flapper door inside the pipe seals the system. 4. Insert the fuel nozzle fully into the filler pipe – the nozzle opens and holds the flapper door while refueling. NOTE: Only the correct size nozzle opens the latches allowing the flapper door to open. 5. Fill the vehicle with fuel – when the fuel nozzle “clicks” or shuts off the fuel tank is full. 6. Maintain nozzle in filler for 5 seconds to allow nozzle to drain. 7.
STARTING AND OPERATING 423 WARNING! 2. Remove the access cover (located on the left side inner trim panel). • Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the “Malfunction Indicator Light” to turn on. • A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned.
424 STARTING AND OPERATING 3. Pull the release cable. Do not exceed the specified Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Vehicle Certification Label Your vehicle has a Vehicle Certification Label affixed to the drivers side B-Pillar or the rear of the driver’s door.
STARTING AND OPERATING 425 Gross Vehicle Weight Rating (GVWR) Overloading The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
426 STARTING AND OPERATING Loading TRAILER TOWING To load your vehicle properly, first figure out its empty weight, axle-by-axle and side-by-side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving. If weighing the loaded vehicle shows that you have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight.
STARTING AND OPERATING 427 exceed the GVWR. Refer to “Vehicle Loading/Vehicle Gross Axle Weight Rating (GAWR) Certification Label” in “Starting And Operating” for The GAWR is the maximum capacity of the front and rear further information. axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or Gross Trailer Weight (GTW) rear GAWR.
428 STARTING AND OPERATING Tongue Weight (TW) Trailer Sway Control The tongue weight is the downward force exerted on the hitch ball by the trailer. The recommended tongue weight is 10% to 15% of the vehicle’s GTW for a conventional hitch. You must consider this as part of the load on your vehicle.
STARTING AND OPERATING 429 Weight-Distributing Hitch A weight-distributing system works by applying leverage through spring (load) bars. They are typically used for heavier loads to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer axle(s). When used in accordance with the manufacturer’s directions, it provides for a more level ride, offering more consistent steering and brake control thereby enhancing towing safety.
430 STARTING AND OPERATING Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.
STARTING AND OPERATING 431 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission 3.6L Automatic 5.7L Automatic Max. GTW (Gross Trailer Weight) 22 sq ft (2.04 sq m) 1,000 lbs (454 kg) 32 sq ft (2.97 sq m) 1,000 lbs (454 kg) Refer to local laws for maximum trailer towing speeds.
432 STARTING AND OPERATING Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer collisions.
STARTING AND OPERATING 433 NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “Tire And Loading Information” placard for the maximum combined weight of occupants and cargo for your vehicle.
434 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Safety chains must always be used between your vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners. • Vehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in PARK.
STARTING AND OPERATING 435 CAUTION! • Do not tow a trailer at all during the first 500 miles (805 km) the new vehicle is driven. The engine, axle or other parts could be damaged. • Then, during the first 500 miles (805 km) that a trailer is towed, do not drive over 50 mph (80 km/h) and do not make starts at full throttle. This helps the engine and other parts of the vehicle wear in at the heavier loads.
436 STARTING AND OPERATING Towing Requirements — Trailer Brakes • Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. • An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required.
STARTING AND OPERATING 437 CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety.
438 STARTING AND OPERATING Four-Pin Connector 1 — Female Pins 2 — Male Pin 3 — Ground 4 — Park 5 — Left Stop/Turn 6 — Right Stop/Turn Seven-Pin Connector 1 2 3 4 — — — — Battery Backup Lamps Right Stop/Turn Electric Brakes 5 — Ground 6 — Left Stop/Turn 7 — Running Lamps
STARTING AND OPERATING 439 Towing Tips Electronic Speed Control — If Equipped Before setting out on a trip, practice turning, stopping, • Do not use in hilly terrain or with heavy loads. and backing up the trailer in an area located away from • When using the speed control, if you experience speed heavy traffic. drops greater than 10 mph (16 km/h), disengage until Automatic Transmission you can get back to cruising speed. The DRIVE range can be selected when towing.
440 STARTING AND OPERATING • To prevent excess heat generation, avoid continuous driving at high RPM. Reduce vehicle speed as necessary to avoid extended driving at high RPM. Return to a higher gear or vehicle speed when grade and road conditions allow. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Two-Wheel Drive And All-Wheel Drive Recreational towing (with all four wheels on the ground, or using a tow dolly) is NOT ALLOWED.
WHAT TO DO IN EMERGENCIES CONTENTS ! HAZARD WARNING FLASHERS . . . . . . . . . . .442 ! JUMP-STARTING PROCEDURES . . . . . . . . . . .455 ! IF YOUR ENGINE OVERHEATS . . . . . . . . . . . .442 ▫ Preparations For Jump-Start . . . . . . . . . . . . . .455 ! WHEEL AND TIRE TORQUE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . .443 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . .457 ▫ Torque Specifications . . . . . . . . . . . . . . . . . . .444 ! JACKING AND TIRE CHANGING . . . . . . . .
442 WHAT TO DO IN EMERGENCIES NOTE: With extended use the Hazard Warning flashers The Hazard Warning flasher switch is located in the may wear down your battery. center of the instrument panel between the center air IF YOUR ENGINE OVERHEATS outlets. In any of the following situations, you can reduce the Push the switch to turn on the Hazard Warning potential for overheating by taking the appropriate acflashers. When the switch is activated, all direc- tion.
WHAT TO DO IN EMERGENCIES 443 • You can also turn the temperature control to maximum heat, the mode control to floor and the blower control to high. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle.
444 WHAT TO DO IN EMERGENCIES Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Bolt Size 130 Ft-Lbs (176 N·m) M14 x 1.50 Lug Nut/ Bolt Socket Size 22 mm **Use only your Authorized Dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Wheel Mounting Surface Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice.
WHAT TO DO IN EMERGENCIES 445 JACKING AND TIRE CHANGING WARNING! Torque Patterns WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
446 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack Location/Spare Tire Stowage The jack and spare tire are both stowed under an access cover in the trunk. Follow these steps to access the jack and spare tire.
WHAT TO DO IN EMERGENCIES 447 6 Spare Tire Fastener 4. Remove the spare tire. 5. Remove the fastener securing the jack. Jack Fastener 6. Remove the jack and lug wrench assembly from under the spare tire. Turn the jack screw to the left to loosen the lug wrench, and remove the wrench from the jack assembly.
448 WHAT TO DO IN EMERGENCIES WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately. 2. Turn on the Hazard Warning flasher. 3. Set the parking brake. 4. Place the shift lever/gear selector into PARK. 5. Turn OFF the ignition. 6.
WHAT TO DO IN EMERGENCIES 449 Jacking And Changing A Tire WARNING! (Continued) WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Turn on the Hazard Warning flasher. • Block the wheel diagonally opposite the wheel to be raised.
450 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare tire, jack, and lug wrench. 2. If equipped with aluminum wheels where the center cap covers the lug nuts, use the lug wrench to pry the center cap off carefully before raising the vehicle. 3.
WHAT TO DO IN EMERGENCIES 451 6 Front Jacking Location Rear Jacking Location 5. Raise the vehicle just enough to remove the flat tire and install the spare tire.
452 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and tire. 7. Mount the spare tire. CAUTION! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly.
WHAT TO DO IN EMERGENCIES 453 9. Lower the vehicle to the ground by turning the jack handle counterclockwise. • For vehicles so equipped, do not attempt to install a center cap or wheel cover on the compact spare. 10. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased • Refer to “Compact Spare Tire” and to “Limited-Use leverage. Tighten the lug nuts in a star pattern until Spare” under “Tires—General Information” in each nut has been tightened twice.
454 WHAT TO DO IN EMERGENCIES WARNING! WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. Road Tire Installation 3.
WHAT TO DO IN EMERGENCIES 455 JUMP-STARTING PROCEDURES WARNING! If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in Do not attempt jump-starting if the battery is frozen. another vehicle or by using a portable battery booster It could rupture or explode and cause personal injury. pack. Jump-starting can be dangerous if done improperly Preparations For Jump-Start so please follow the procedures in this section carefully.
456 WHAT TO DO IN EMERGENCIES WARNING! Remote Battery Post Locations 1 — Remote Positive (+) Post 2 — Remote Negative (-) Post • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You could be seriously injured.
WHAT TO DO IN EMERGENCIES 457 3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure WARNING! Failure to follow this jump-starting procedure could result in personal injury or property damage due to battery explosion.
458 WHAT TO DO IN EMERGENCIES WARNING! Do not connect the jumper cable to the negative (-) post of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. Only use the specific ground point, do not use any other exposed metal parts. Disconnecting The Jumper Cables 1. Disconnect the negative (-) jumper cable from the remote negative (-) post of the vehicle with the discharged battery. 2.
WHAT TO DO IN EMERGENCIES 459 CAUTION! Accessories plugged into the vehicle power outlets draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough without engine operation, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved using a rocking motion.
460 WHAT TO DO IN EMERGENCIES NOTE: Push the #ESC Off# switch, to place the Electronic Stability Control (ESC) system in #Partial Off# mode, before rocking the vehicle. Refer to “Electronic Brake Control” in “Starting And Operating” for further information. Once the vehicle has been freed, push the #ESC Off# switch again to restore #ESC On# mode.
WHAT TO DO IN EMERGENCIES 461 WARNING! (Continued) allow your vehicle to roll away if it is not secured by the parking brake or by proper connection to a tow vehicle. Activating the Manual Park Release on an unsecured vehicle could lead to serious injury or death for those in or around the vehicle. 2. Remove the console storage bin to access the Manual Park Release lever.
462 WHAT TO DO IN EMERGENCIES 3. Using a small screwdriver or similar tool, fish the 5. While holding the locking tab in the disengaged tether strap up through the opening in the console position, pull the tether strap to rotate the lever up and base. rearward, until it locks in place in the vertical position. The vehicle is now out of PARK and can be towed. 4.
WHAT TO DO IN EMERGENCIES 463 To Reset The Manual Park Release: 1. Push the latch (at the base of the lever, on the rear side) rearward (away from the lever) to unlatch the lever. 4. Tuck the tether strap into the base of the console. Reinstall the console storage bin. TOWING A DISABLED VEHICLE 2. Rotate the Manual Park Release lever forward and This section describes procedures for towing a disabled down, to its original position, until the locking tab vehicle using a commercial towing service.
464 WHAT TO DO IN EMERGENCIES Towing Condition Flat Tow Wheels OFF The Ground RWD MODELS AWD MODELS NONE NOT ALLOWED Wheel Lift or Dolly Tow Front Rear If transmission is operable: • Transmission in NEUTRAL • 30 mph (48 km/h) max speed • 30 miles (48 km) max distance NOT RECOMMENDED (but, if used, same limitations as above) NOT RECOMMENDED ALL BEST METHOD Flatbed NOT ALLOWED NOT RECOMMENDED, but, if used: • Ignition in ON/RUN position • Transmission in NEUTRAL (NOT in Park) BEST METHOD
WHAT TO DO IN EMERGENCIES 465 Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for this purpose, following equipment manufacturer’s instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to main structural members of the vehicle, not to bumpers or associated brackets. State and local laws regarding vehicles under tow must be observed. If you must use the accessories (wipers, defrosters, etc.
466 WHAT TO DO IN EMERGENCIES All Wheel Drive (AWD) Models The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a flatbed. If the transmission and drivetrain are operable, AWD models can also be towed with the ignition in the ON/RUN position, the transmission in NEUTRAL (not in PARK!), and the rear wheels OFF the ground with no limitation on speed or distance.
WHAT TO DO IN EMERGENCIES 467 Rear-Wheel Drive (RWD) Models The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a flatbed. CAUTION! Towing this vehicle in violation of the above requirements can cause severe transmission damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE CONTENTS ! ENGINE COMPARTMENT — 3.6L . . . . . . . . . .471 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . .481 ! ENGINE COMPARTMENT — 5.7L . . . . . . . . . .472 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . .481 ! ONBOARD DIAGNOSTIC SYSTEM — OBD II . .473 ▫ Air Conditioner Maintenance . . . . . . . . . . . . .483 ! EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . .473 ▫ A/C Air Filter . . . . . . . . . . . .
470 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission . . . . . . . . . . . . . . . .499 ▫ Front Turn Signal Lamps . . . . . . . . . . . . . . . .525 ▫ All Wheel Drive (AWD) — If Equipped . . . . .500 ▫ Front Fog Lamp . . . . . . . . . . . . . . . . . . . . . .525 ▫ Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . .501 ▫ Front/Rear Side Marker Lamp . . . . . . . . . . . .526 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 471 ENGINE COMPARTMENT — 3.
472 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 5.
MAINTAINING YOUR VEHICLE 473 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
474 MAINTAINING YOUR VEHICLE NOTE: If you crank or start the engine, you will have to For states that require an Inspection and Maintestart this test over. nance (I/M), this check verifies the “Malfunction Indicator Light (MIL)” is functioning and is not 2. As soon as you cycle the ignition switch to the ON on when the engine is running, and that the OBD II position, you will see the Malfunction Indicator Light system is ready for testing. (MIL) symbol come on as part of a normal bulb check.
MAINTAINING YOUR VEHICLE 475 If your OBD II system is not ready, you should see your authorized dealer or repair facility. If your vehicle was recently serviced or had a battery failure or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD II system to update. A recheck with the above test routine may then indicate that the system is now ready.
476 MAINTAINING YOUR VEHICLE WARNING! CAUTION! You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly maintain your vehicle or perform repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle performance.
MAINTAINING YOUR VEHICLE 477 Checking Oil Level — 5.7L Engine Engine Oil To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at To assure proper engine lubrication, the engine oil must regular intervals, such as every fuel stop. The best time to be maintained at the correct level. Check the oil level at check the engine oil level is about five minutes after a regular intervals, such as every fuel stop.
478 MAINTAINING YOUR VEHICLE Change Engine Oil American Petroleum Institute (API) Engine Oil The oil change indicator system will remind you that it is Identification Symbol time to take your vehicle in for scheduled maintenance. This symbol means that the oil has Refer to the “Maintenance Schedule” for further informabeen certified by the American tion. Petroleum Institute (API).
MAINTAINING YOUR VEHICLE 479 Engine Oil Viscosity — 3.6L Engine Engine Oil Viscosity — 5.7L Engine MOPAR® SAE 5W-20 engine oil approved to Chrysler Material Standard MS-6395 such as Pennzoil®, Shell Helix® or equivalent is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. MOPAR® SAE 5W-20 engine oil or equivalent such as Pennzoil® or Shell Helix® is recommended for all operating temperatures.
480 MAINTAINING YOUR VEHICLE Lubricants that do not have both, the engine oil certifi- indiscriminately discarded, can present a problem to the cation mark and the correct SAE viscosity grade number environment. Contact your authorized dealer, service station or governmental agency for advice on how and should not be used. where used oil and oil filters can be safely discarded in Synthetic Engine Oils your area.
MAINTAINING YOUR VEHICLE 481 Engine Air Cleaner Filter Engine Air Cleaner Filter Selection Refer to the “Maintenance Schedule” for the proper The quality of replacement engine air cleaner filters maintenance intervals. varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR® engine air cleaner filters are a high quality filter and are recomWARNING! mended. The air induction system (air cleaner, hoses, etc.
482 MAINTAINING YOUR VEHICLE WARNING! Battery Location • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE 483 CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.
484 MAINTAINING YOUR VEHICLE CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components. Such damage is not covered by the New Vehicle Limited Warranty. Refrigerant Recovery And Recycling R134a — If Equipped R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product.
MAINTAINING YOUR VEHICLE 485 1. Remove the access door in the cowl screen by pressing the retaining clips. 7 Filter Access Cover 3. Remove the used filter. Access Door 2. Unsnap both ends and lift the filter access cover. 4. Install the new filter with arrows pointing in the direction of airflow, which is toward the rear of the vehicle (text and arrows on the filter will indicate this).
486 MAINTAINING YOUR VEHICLE Body Lubrication A/C Air Filter 5. Close the filter access cover. Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, decklid, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR® Spray White Lube to assure quiet, easy operation and to protect against rust and wear.
MAINTAINING YOUR VEHICLE 487 Windshield Wiper Blades Adding Washer Fluid Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level at regular intervals.
488 MAINTAINING YOUR VEHICLE The fluid reservoir will hold nearly 1 gallon (4 liters) of have an authorized technician inspect the complete exwasher fluid when the message “Low Washer Fluid” haust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams appears in the Driver Information Display (DID). or loose connections could permit exhaust fumes to seep into the passenger compartment.
MAINTAINING YOUR VEHICLE 489 WARNING! (Continued) CAUTION! (Continued) • A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
490 MAINTAINING YOUR VEHICLE NOTE: Intentional tampering with emissions control • Do not idle the engine with any spark plug wires systems can result in civil penalties being assessed disconnected or removed, such as when diagnostic against you. testing, or for prolonged periods during very rough idle or malfunctioning operating conditions. In unusual situations involving grossly malfunctioning engine operation, a scorching odor may suggest severe Cooling System and abnormal catalyst overheating.
MAINTAINING YOUR VEHICLE 491 If the cap is sealing properly, the engine coolant (antiCheck engine coolant (antifreeze) protection every 12 freeze) will begin to drain from the coolant recovery months (before the onset of freezing weather, where bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. applicable).
492 MAINTAINING YOUR VEHICLE Selection Of Coolant Refer to “Fluids, Lubricants, And Genuine Parts” in “Maintaining Your Vehicle” for further information. CAUTION! • Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
MAINTAINING YOUR VEHICLE 493 miles (240,000 km) before replacement. To prevent reduc- • Mix a minimum solution of 50% OAT engine coolant ing this extended maintenance period, it is important that that meets the requirements of Chrysler Material Stanyou use the same engine coolant (OAT coolant conformdard MS.90032 and distilled water. Use higher concening to MS.90032) throughout the life of your vehicle. trations (not to exceed 70%) if temperatures below −34° F (−37° C) are anticipated.
494 MAINTAINING YOUR VEHICLE NOTE: • Some vehicles require special tools to add coolant properly. Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system please contact your local authorized dealer. • Mixing engine coolant (antifreeze) types is not recommended and can result in cooling system damage.
MAINTAINING YOUR VEHICLE 495 with your local authorities to determine the disposal rules for your community. To prevent ingestion by animals or children, do not store ethylene glycol-based engine coolant in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate.
496 MAINTAINING YOUR VEHICLE If an examination of your engine compartment shows no • Make sure that the coolant expansion bottle overflow evidence of radiator or hose leaks, the vehicle may be hoses are not kinked or obstructed. safely driven. The vapor will soon dissipate. • Keep the front of the radiator clean. If your vehicle is • Do not overfill the coolant expansion bottle. equipped with air conditioning, keep the front of the condenser clean.
MAINTAINING YOUR VEHICLE 497 WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency. Clean the top of the master cylinder area before removing the cap. Add fluid to bring the level up to the top of the “FULL” mark on the side of the master cylinder reservoir.
498 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, And Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir.
MAINTAINING YOUR VEHICLE 499 Automatic Transmission Special Additives Selection Of Lubricant The manufacturer strongly recommends against using any special additives in the transmission. It is important to use the proper transmission fluid to ensure optimum transmission performance and life. Use only the manufacturer’s specified transmission fluid. Refer to “Fluids, Lubricants, And Genuine Parts” in this section for fluid specifications.
500 MAINTAINING YOUR VEHICLE Fluid Level Check Fluid And Filter Changes The fluid level is preset at the factory and does not require adjustment under normal operating conditions. Routine fluid level checks are not required, therefore the transmission has no dipstick. Your authorized dealer can check your transmission fluid level using special service tools. Under normal operating conditions, the fluid installed at the factory will provide satisfactory lubrication for the life of the vehicle.
MAINTAINING YOUR VEHICLE 501 case fluid level, remove the fill/inspection plug. The fluid level. Refer to “Fluids, Lubricants, And Genuine fluid level should be even with the bottom of the hole. Parts” in “Maintaining Your Vehicle” for further information. Use this plug to add fluid as required. The front differential fill plug is located on the outer cover near the halfshaft attachment. To inspect the differential fluid level, remove the fill plug.
502 MAINTAINING YOUR VEHICLE passable in snow and ice, and chemicals that are sprayed on trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and underbody protection. • Insects, tree sap and tar. • Salt in the air near seacoast localities.
MAINTAINING YOUR VEHICLE 503 CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner.
504 MAINTAINING YOUR VEHICLE Wheel And Wheel Trim Care • All wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • To remove heavy soil and/or excessive brake dust, use MOPAR® Wheel Cleaner. NOTE: If your vehicle is equipped with Dark Vapor or Black Satin Chrome wheels DO NOT USE wheel cleaners, abrasives or polishing compounds.
MAINTAINING YOUR VEHICLE 505 • For tough stains, apply MOPAR® Total Clean, or a Your leather upholstery can be best preserved by regular mild soap solution to a clean, damp cloth and remove cleaning with a damp soft cloth. Small particles of dirt stain. Use a fresh, damp towel to remove soap residue. can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth.
506 MAINTAINING YOUR VEHICLE CAUTION! Direct contact of air fresheners, insect repellents, suntan lotions, or hand sanitizers to the plastic, painted, or decorated surfaces of the interior may cause permanent damage. Wipe away immediately. CAUTION! Damage caused by these type of products may not be covered by your New Vehicle Limited Warranty. CAUTION! Do not use Alcohol and Alcohol-based and/or Keton based cleaning products to clean leather seats, as damage to the seat may result.
MAINTAINING YOUR VEHICLE 507 cleaner. Use caution when cleaning the inside rear window equipped with electric defrosters or windows equipped with radio antennas. Do not use scrapers or other sharp instrument that may scratch the elements. Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric.
508 MAINTAINING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.). rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material. Failure to use proper fuses may result in serious personal injury, fire and/or property damage.
MAINTAINING YOUR VEHICLE 509 Front Power Distribution Center (Fuses) The Front Power Distribution Center is located in the engine compartment. This module contains fuses and relays. Front Power Distribution Center CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
510 MAINTAINING YOUR VEHICLE Cavity 1 2 3 Cartridge Fuse – 40 Amp Green 50 Amp Red Mini-Fuse – – – 4 5 6 7 8 9 10 30 Amp Pink 40 Amp Green 30 Amp Pink – 20 Amp Blue – – – – – – – 20 Amp Yellow 10 Amp Red 11 12 13 – – – 20 Amp Yellow 10 Amp Red – Description Fuse – Spare Radiator Fan #1 – If Equipped Power Steering #1 / Radiator Fan (6.
MAINTAINING YOUR VEHICLE 511 Cavity 14 15 16 18 19 Cartridge Fuse – – – 50 Amp Red 50 Amp Red Mini-Fuse – 20 Amp Yellow 20 Amp Yellow – – 20 21 30 Amp Pink 30 Amp Pink – – 22 23 24 28 29 40 Amp Green / 20 Amp Blue – Police 20 Amp Blue 20 Amp Blue – – – – – – 15 Amp Blue Description Fuse – Spare Left HID – If Equipped Right HID – If Equipped Radiator Fan #2 – If Equipped Power Steering #2 / Radiator Fan (6.
512 MAINTAINING YOUR VEHICLE Cavity 30 31 32 33 34 35 36 37 Cartridge Fuse – – – – – – – – Mini-Fuse – 25 Amp Clear – – 25 Amp Clear 20 Amp Yellow 10 Amp Red 10 Amp Red 38 39 48 – – – 10 Amp Red 10 Amp Red 10 Amp Red 49 50 – – – – Description Fuse – Spare Engine Module Fuse – Spare Fuse – Spare Powertrain #1 Powertrain #2 Anti-Lock Brake Module Engine Controller/Rad Fan Relays – If Equipped Airbag Module Power Steering Module/AC Clutch Relay AWD Module/Front Axle Disconnect (LX) / Adaptive Cruise
MAINTAINING YOUR VEHICLE 513 Cavity 51 52 53 Cartridge Fuse – – – Mini-Fuse 20 Amp Yellow 5 Amp Tan – Description Vacuum Pump Adaptive Cruise (LD/LX) – If Equipped Fuse – Spare Rear Power Distribution Center (Fuses) There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays.
514 MAINTAINING YOUR VEHICLE CAUTION! Rear Power Distribution Center Cavity 2 3 Cartridge Fuse 60 Amp Yellow — • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating.
MAINTAINING YOUR VEHICLE 515 Cavity 4 5 6 7 8 9 10 11 12 Cartridge Fuse 60 Amp Yellow 30 Amp Pink 40 Amp Green 40 Amp Green 30 Amp Pink 40 Amp Green 30 Amp Pink 30 Amp Pink — Mini-Fuse — — — — — — — — 20 Amp Yellow 15 16 17 18 19 40 Amp Green 20 Amp Blue — 30 Amp Pink — — — — — — Description Front PDC Feed #2 Sunroof / Dome Lamp – Police Exterior Lighting #1 Exterior Lighting #2 Interior Lighting Power Locks Driver Door Control Module Passenger Door Control Module Dual USB Center Console Rear/ Cigar
516 MAINTAINING YOUR VEHICLE Cavity 20 21 22 Cartridge Fuse — 30 Amp Pink (6.2L Supercharged) 25 Amp Clear (LD STD) — 23 24 — — 25 26 — — Mini-Fuse — — Description Fuse — Spare Fuel Pump (6.2L Supercharged) Fuel Pump (LD STD) 20 Amp Yellow – Police 10 Amp Red – LA 10 Amp Red 15 Amp Blue Right Spot Lamp – Police Integrated Center Stack – LA Fuel Door/Diagnostic Port Integrated Center Stack – LD/LX Tire Pressure Monitor Transmission / Electronic Shift Module (LD/LX) Fuel Pump (LA) Fuel Pump (LA 6.
MAINTAINING YOUR VEHICLE 517 Cavity 27 31 32 33 Cartridge Fuse — — — — Mini-Fuse 25 Amp Clear 25 Amp Breaker 15 Amp Blue 15 Amp Blue 34 — 10 Amp Red 35 36 — — 5 Amp Tan 15 Amp Blue 37 38 — — 20 Amp Yellow 15 Amp Blue – LD/LX 20 Amp Yellow – LA Description Amplifier – If Equipped Power Seats HVAC Module/Cluster Ignition Switch/RF hub Module/Steering Column Lock-LX If Equipped Steering Column Module/ Clock/Spare – Police Battery Sensor Electronic Exhaust Valve – If Equipped Radio Console Power Ou
518 MAINTAINING YOUR VEHICLE Cavity 40 41 42 43 Cartridge Fuse — — 30 Amp Pink — Mini-Fuse — — — 20 Amp Yellow 44 — 10 Amp Red 45 — 15 Amp Blue 46 47 — — — 10 Amp Red 48 49 — — 20 Amp Yellow — Description Fuse — Spare Fuse — Spare Rear Defrost Rear Heated Seats/Steering Wheel Module Park Assist / Blind Spot / Rear View Camera Cluster / Rearview Mirror / Compass(LDLX)/Humidity Sensor Fuse — Spare Adaptive Front Lighting / Auto High BEAM / Day Time Running Lamps- If Equipped Active Suspension
MAINTAINING YOUR VEHICLE 519 Cavity 50 51 Cartridge Fuse — — Mini-Fuse — 20 Amp Yellow 52 — 10 Amp Red 53 — 10 Amp Red 54 55 56 57 58 59 60 — — — — — — — 10 Amp Red — — — 10 Amp Red 20 Amp Yellow 5 Amp Tan Description Fuse — Spare Front Heated Seats – If Equipped Heated Cupholders/Rear Heated Seat Switches – If Equipped HVAC Module/In Car Temperature Sensor Airbag Module (LA) Fuse — Spare Fuse — Spare Fuse — Spare Airbag Module (LD/LX) Adjustable Pedals – Police Heated Washer Nozzles (LD) 7
520 MAINTAINING YOUR VEHICLE Cavity 61 Cartridge Fuse — Mini-Fuse 20 Amp Yellow 62 63 64 65 66 67 68 — — — — — — — — — 25 Amp Breaker 10 Amp Red — 10 Amp Red 10 Amp Red 69 70 — — — — Description Cigar Lighter (LA) – If Equipped Fuse — Spare Fuse — Spare Rear Windows (LD/LX) Airbag Module Fuse — Spare Rain and Light Sensor/Sunroof Dual USB Power Outlet – R/A Sense (LD/LX) Rear Sunshade (LD/LX) Fuse — Spare Fuse — Spare
MAINTAINING YOUR VEHICLE 521 VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery. • Disconnect the negative cable from the battery. in the fresh air and high blower setting. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again.
522 MAINTAINING YOUR VEHICLE Bulb Number Shift Indicator Lamp JKLE14140 Optional Door Map Pocket/Cupholder LED (Serviced at Authorized Dealer) For lighted switches, see your authorized dealer for replacement instructions.
MAINTAINING YOUR VEHICLE 523 Backup Lamp Center High Mount Stop Lamp (CHMSL) License Rear Fog Lamp – If Equipped LED LED LED LED Bulb Number (Serviced at Authorized (Serviced at Authorized (Serviced at Authorized (Serviced at Authorized Dealer) Dealer) Dealer) Dealer) headlamp switch off and the ignition turned to the OFF position. Because of this, you should not attempt to service NOTE: Lens fogging can occur under certain atmoa headlamp bulb yourself.
524 MAINTAINING YOUR VEHICLE NOTE: On vehicles equipped with HID headlamps, 5. Disconnect the bulb from the wiring assembly and install the replacement bulb. when the headlamps are turned on, there is a blue hue to the lights. This diminishes and becomes more white after 6. Reinstall the bulb and wiring assembly into the headapproximately 10 seconds, as the system charges. lamp assembly, and then turn it clockwise. Standard Low Beam And High Beam Headlamp 7.
MAINTAINING YOUR VEHICLE 525 Front Turn Signal Lamps 1. Open the hood. 5. Disconnect the bulb from the wiring connector and install the replacement bulb. 6. Install the bulb and connector assembly straight into NOTE: Removal of the air cleaner filter housing may be the lamp until it locks in place. necessary prior to replacing bulbs in the headlamp assembly on the driver side of the vehicle. 7. Install the turn signal bulb cap in the headlamp housing and rotate clockwise to lock in place. 2.
526 MAINTAINING YOUR VEHICLE Front/Rear Side Marker Lamp License Lamp The Side Markers use LED lamps that are not serviceable The License Lamp uses an LED source that is not separately. The Side Markers must be replaced as an serviceable separately. The License Lamp must be reassembly, see your authorized dealer. placed as an assembly, see your authorized dealer.
MAINTAINING YOUR VEHICLE 527 FLUID CAPACITIES U.S. Fuel (Approximate) All Engines 18.5 Gallons Engine Oil With Filter 3.6 Liter Engine (SAE 5W-20, API Certified) 6 Quarts 5.7 Liter Engine (SAE 5W-20, API Certified) 7 Quarts Cooling System * 3.6 Liter Engine – We recommend you use MOPAR® Antifreeze/Engine 10 Quarts Coolant 10 Year/150,000 Mile Formula or equivalent. 5.7 Liter Engine without Severe Duty II Cooling System – We recommend 14.
528 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection – 3.6L Engine Fuel Selection – 5.7L Engine Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®.
MAINTAINING YOUR VEHICLE 529 CAUTION! CAUTION! (Continued) • Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze).
530 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission – 8-Speed Transmission Brake Master Cylinder Front Axle Rear Axle Transfer Case Fluid, Lubricant, Or Genuine Part Use only MOPAR® ZF 8&9 Speed ATF™ Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. We recommend you use MOPAR® DOT 3 and SAE J1703. If DOT 3 brake fluid is not available, then DOT 4 is acceptable.
MAINTENANCE SCHEDULES CONTENTS ! MAINTENANCE SCHEDULE . . . . . . . . . . . . .532 ▫ Maintenance Chart. . . . . . . . . . . . . . . . . . . . .
532 MAINTENANCE SCHEDULES The “Oil Change Required” message will be displayed in Your vehicle is equipped with an automatic oil change the DID and a single chime will sound, indicating that an indicator system. The oil change indicator system will oil change is necessary. remind you that it is time to take your vehicle in for Your authorized dealer will reset the oil change indicator scheduled maintenance. message after completing the scheduled oil change.
MAINTENANCE SCHEDULES 533 Once A Month Or Before A Long Trip: • Check engine oil level • Check windshield washer fluid level • Check tire pressure and look for unusual wear or damage. Rotate tires at the first sign of irregular wear, even if it occurs before your next scheduled service. • Check the fluid levels of the coolant reservoir, brake master cylinder, and power steering (if equipped) and fill as needed. • Check function of all interior and exterior lights Required Maintenance Intervals.
534 MAINTENANCE SCHEDULES Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary. Inspect the rear axle fluid. Inspect the front axle fluid (All Wheel Drive Only). Inspect the brake linings, replace as necessary. Adjust park brake on vehicles equipped with four wheel disc brakes. Inspect transfer case fluid (All Wheel Drive Only).
Additional Maintenance Replace engine air filter. Replace cabin/air conditioning filter. Replace spark plugs.** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Inspect the transfer case fluid. Change the transfer case fluid; if using your vehicle for any of the following: police, taxi, fleet, off-road, or frequent trailer towing. (All Wheel Drive Only).
30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 2 3 4 5 6 7 8 9 10 11 12 13 14 15 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Or Years: Or Kilometers: 20,000 Mileage or time passed (whichever comes first) 32,000 536 MAINTENANCE SCHEDULES Change the rear axle fluid and on models equipped with All Wheel Drive (AWD) change the front axle fluid if using your vehic
MAINTENANCE SCHEDULES 537 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ! WARRANTY INFORMATION . . . . . . . . . . . . .543 ! SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . .540 ! MOPAR® PARTS . . . . . . . . . . . . . . . . . . . . . . .544 ▫ Prepare For The Appointment. . . . . . . . . . . . .540 ! REPORTING SAFETY DEFECTS . . . . . . . . . . . .544 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . .540 ▫ In The 50 United States And Washington, D.C. . .
540 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment Be Reasonable With Requests If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it is advisable to make these arrangements when you call for an appointment.
IF YOU NEED CONSUMER ASSISTANCE 541 facilities, factory-trained technicians, special tools, and • Authorized dealer name the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer service manager first. Most matters can be re- FCA US LLC Customer Center solved with this process. P.O.
542 IF YOU NEED CONSUMER ASSISTANCE Mexico, D. F. Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered by Bell Canada. For TTY teletypewriter users, dial 711 and for Voice callers, dial 1-800-855-0511 to connect with a Bell Relay Service operator.
IF YOU NEED CONSUMER ASSISTANCE 543 The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract. If you purchased a service contract that is not a manufacturer’s service contract, and you require service after the manufacturer’s New Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in those documents.
544 IF YOU NEED CONSUMER ASSISTANCE campaign. However, NHTSA cannot become involved in individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recommended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1-888-327-4236 (TTY: 1-800-424- 9153), operating at its best. or go to http://www.safercar.
IF YOU NEED CONSUMER ASSISTANCE 545 PUBLICATION ORDER FORMS Diagnostic Procedure Manuals To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations.
546 IF YOU NEED CONSUMER ASSISTANCE Call toll free at: Treadwear • 1-800-890-4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
IF YOU NEED CONSUMER ASSISTANCE 547 WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10
550 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . .361 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . . .364 Adaptive Cruise Control (ACC) (Cruise Control) . . .172 Adding Engine Coolant (Antifreeze) . . . . . . . . . . . .492 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .421 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . .487 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .415 Adjustable Pedals . . . . . . . . . .
INDEX 551 Alarm System (Security Alarm) . . . . . . . . . . . . . . . .17 All Wheel Drive (AWD). . . . . . . . . . . . . . . . . . . . .355 Alterations/Modifications, Vehicle . . . . . . . . . . . . . . .7 Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . . . .492 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .494 Anti-Lock Brake System (ABS) . . . . . . . . . . . . . . . .364 Anti-Lock Warning Light . . . . . . . . . . . . . . . . . . . .263 Appearance Care . . . . . . . . . .
552 INDEX Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . .530 Brake, Parking . . . . . . . . . . . . . . . . . . . . . . . . . . .361 Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .363 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . .363 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . . . . .364 Fluid Check . . . . . . . . . . . . . . . . . . . . . . . . . . .497 Master Cylinder . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 553 How To Stow An Unused ALR Seat Belt . . . . . . . .86 Infants And Child Restraints . . . . . . . . . . . . . . . .74 Install A LATCH-Compatible Child Restraint . . . .85 Lower Anchors And Tethers For Children . . . . . . .79 Older Children And Child Restraints . . . . . . . . . .75 Seating Positions . . . . . . . . . . . . . . . . . . . . . . . .78 Child Safety Locks . . . . . . . . . . . . . . . . . . . . . . . . .31 Clean Air Gasoline . . . . . . . . . . . . . . . . . . . . . . . .
554 INDEX Customer Programmable Features . . . . . . . . . . . . .277 Door Locks Child-Protection Door Lock — Rear Doors . . . . . .31 Data Recorder, Event . . . . . . . . . . . . . . . . . . . . . . .70 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Daytime Brightness, Interior Lights. . . . . . . . . . . . .157 Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Daytime Running Lights . . . . . . . . . . . . . . . . . . . .149 Key Fob Emergency Key . . . . . . .
INDEX 555 Electric Rear Window Defrost. . . . . . . . . . . . . . . . .255 Electric Remote Mirrors . . . . . . . . . . . . . . . . . . . . .114 Electronic Brake Control System . . . . . . . . . . . . . . .364 Brake Assist System . . . . . . . . . . . . . . . . . . . . .367 Traction Control System . . . . . . . . . . . . . . . . . . .366 Electronic Power Distribution Center (Fuses) . . . . . .509 Electronic Speed Control (Cruise Control) . . . . . . . .168 Electronic Stability Control (ESC) . . . . . . . .
556 INDEX Temperature Gauge . . . . . . . . . . . . . . . . . . . . . .263 Flashers Engine Oil Viscosity . . . . . . . . . . . . . . . . . . . . . . .479 Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . .442 Engine Oil Viscosity Chart . . . . . . . . . . . . . . . . . . .479 Turn Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Enhanced Accident Response Feature . . . . . . . . . . . .66 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 557 Cooling System . . . . . . . . . . . . . . . Engine Oil . . . . . . . . . . . . . . . . . . Transfer Case . . . . . . . . . . . . . . . . Fluids, Lubricants And Genuine Parts . Fog Lights . . . . . . . . . . . . . . . . . . . . Folding Rear Seat . . . . . . . . . . . . . . . Forward Collision Warning . . . . . . . . Freeing A Stuck Vehicle . . . . . . . . . . . Fuel . . . . . . . . . . . . . . . . . . . . . . . . . Additives . . . . . . . . . . . . . . . . . . . Clean Air . . . . . . . . . . . .
558 INDEX GVWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .425 Head Rests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134 Heated Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . .115 Hazard Heated Seats. . . . . . . . . . . . . . . . . . . . . . . . . . . . .131 Driving Through Flowing, Rising, Or Shallow Heater, Engine Block . . . . . . . . . . . . . . . . . . . . . . .342 Standing Water . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 559 Interior Appearance Care . . . . . . . . . . . . . . . . . . . .505 Key-In Reminder . . . . . . . . . . . . . . . . . . . . . . . . . .13 Interior Lights . . . . . . . . . . . . . . . . . . . . . . . . . . .155 Keyless Enter-N-Go . . . . . . . . . . . . . . . . . . . . . . . .32 Intermittent Wipers (Delay Wipers). . . . . . . . . . . . .158 Keyless Enter-N-Go™ . . . . . . . . . . . . . . . . . . . . . . .32 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
560 INDEX Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . . .413 Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Life Of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . .397 Light Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Lights . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 561 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . .263 Security Alarm . . . . . . . . . . . . . . . . . . . . . . . . .263 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .521 Service Engine Soon (Malfunction Indicator) . . . .263 Tire Pressure Monitoring (TPMS) . . . . . . . . . . . .263 Traction Control . . . . . . . . . . . . . . . . . . . . . . . .373 Turn Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Vanity Mirror . . . . . . . . . . . . . .
562 INDEX Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Rearview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 Vanity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 Modifications/Alterations, Vehicle . . . . . . . . . . . . . . .7 Monitor, Tire Pressure System . . . . . . . . . . . . . . . .402 MOPAR® Parts. . . . . . . . . . . . . . . . . . . . . . . . . . .475 MTBE/ETBE . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 563 Panic Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Parking Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . .361 ParkSense® System, Rear. . . . . . . . . . . . . . . . . . . .209 Passing Light . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 Passive Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Pedals, Adjustable. . . . . . . . . . . . . . . . . . . . . . . . .166 Pets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
564 INDEX Rear Window Features . . . . . . . . . . . . . . . . . . . . .255 Recorder, Event Data . . . . . . . . . . . . . . . . . . . . . . .70 Recreational Towing . . . . . . . . . . . . . . . . . . . . . . .440 Reformulated Gasoline . . . . . . . . . . . . . . . . . . . . .414 Refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .484 Release, Hood. . . . . . . . . . . . . . . . . . . . . . . . . . . .144 Reminder, Lights On . . . . . . . . . . . . . . . . . . . . . . .
INDEX 565 Rocking Vehicle When Stuck . . . . . . . . . . . . . . . . .459 Seat Belt System . . . . . . . . . . . . . . . . . . . . . . . . .42 Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . .401 Seat Belt Maintenance . . . . . . . . . . . . . . . . . . . . . .507 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . . . . .44 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . .96 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
566 INDEX Height Adjustment . . . . . . . . . . . . . . . . . . . . . .127 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 Rear Folding . . . . . . . . . . . . . . . . . . . . . . . . . .138 Seatback Release . . . . . . . . . . . . . . . . . . . . . . . .138 Tilting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 Security Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 567 Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Starting And Operating . . . . . . . . . . . . . . . . . . . . .337 Starting Procedures . . . . . . . . . . . . . . . . . . . . . . . .337 Steering Column Controls . . . . . . . . . . . . . . . . . . . . . . .151 Column Lock . . . . . . . . . . . . . . . . . . . . . . . . . .162 Tilt Column . . . . . . . . . . . . . . . . . . . . . . . . . . .162 Wheel, Heated . . . . . . . . . . . . . . . . . . . . . . . . .164 Wheel, Tilt .
568 INDEX Jacking . . . . . . . . . . . . . . . . . . . Life Of Tires . . . . . . . . . . . . . . . Load Capacity . . . . . . . . . . . . . Pressure Monitor System (TPMS) Pressure Warning Light . . . . . . . Quality Grading . . . . . . . . . . . . Radial . . . . . . . . . . . . . . . . . . . Replacement . . . . . . . . . . . . . . . Rotation . . . . . . . . . . . . . . . . . . Safety . . . . . . . . . . . . . . . . . . . Sizes . . . . . . . . . . . . . . . . . . . . Snow Tires . . . . . . . . . . . . . . .
INDEX 569 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .501 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . .345 Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . .345 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .499 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .499 Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .342 Transmitter Battery Service (Remote Keyless Entry) . .
570 INDEX Vehicle Security Alarm (Security Alarm) . . . . . . . . . .17 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . . . . .313 Viscosity, Engine Oil . . . . . . . . . . . . . . . . . . . . . . .479 Voice Recognition System (VR) . . . . . . . . . . . . . . . .316 Warning Flasher, Hazard . . . . . . . . . . . . . . . . . . . .442 Warning Lights (Instrument Cluster Description) . . .263 Warnings And Cautions . . . . . . . . . . . . . . . . . . . . . .6 Warranty Information . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2015 300 2015 OWNER’S MANUAL FCA US LLC 15C481-126-AC Third Edition Printed in U.S.A.
