2014 Town & Country 2014 OWNER’S MANUAL Chrysler Group LLC 14Y531-126-AD Fourth Edition Rev 1 Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. Drunken driving is one of the most frequent causes of accidents. This manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .4 䡵 VEHICLE IDENTIFICATION NUMBER . . . . . . . .6 䡵 HOW TO USE THIS MANUAL . . . . . . . . . . . . . .4 䡵 VEHICLE MODIFICATIONS/ALTERATIONS . . . .7 䡵 WARNINGS AND CAUTIONS . . . . . . . . . . . . . .
4 INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained techCongratulations on selecting your new Chrysler Group nicians and genuine parts, and cares about your satisfacLLC vehicle. Be assured that it represents precision tion. workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A WORD ABOUT YOUR KEYS . . . . . . . . . . . . .13 ▫ Rearming Of The System . . . . . . . . . . . . . . . . .19 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . .13 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . .19 ▫ Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 ▫ To Disarm The System . . . . . . . . . . . . . . . . . .20 ▫ Removing Key Fob From Ignition . . . . . . . . . .15 ▫ Tamper Alert . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Sound Horn With Remote Lock . . . . . . . . . . . .25 䡵 REMOTE STARTING SYSTEM — IF EQUIPPED . . .32 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . .26 ▫ How To Use Remote Start . . . . . . . . . . . . . . . .32 䡵 DOOR LOCKS . . . . . . . . . . . . . . . ▫ Power Open/Close Power Liftgate — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .27 ▫ Manual Door Locks . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 䡵 LIFTGATE . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 ▫ Seat Belt Extender . . . . . . . . . . . . . . . . . . . . .80 ▫ Power Liftgate — If Equipped . . . . . . . . . . . . .59 ▫ Supplemental Restraint System (SRS) — Air Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 䡵 OCCUPANT RESTRAINTS . . . . . . . . . . . . . . . .62 ▫ Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 䡵 SAFETY TIPS . . . . . . . . . . . . . . . . . . . . . . . . .123 ▫ Transporting Passengers . . . . . . . . . . . . . . . . .123 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . .123 ▫ Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124 ▫ Periodic Safety Checks You Should Make Outside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 A WORD ABOUT YOUR KEYS Your vehicle is equipped with a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the Key Fob into the ignition switch with either side up. When released from the START position, the switch automatically returns to the ON/RUN position.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key Fob The Key Fob operates the ignition switch. Insert the square end of the Key Fob into the ignition switch located on the instrument panel and rotate to the desired position. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE transmitter go dead.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Removing Key Fob From Ignition WARNING! (Continued) Place the shift lever in PARK. Turn the Key Fob to the OFF position and then remove the Key Fob. NOTE: Power window switches will also remain active for up to 10 minutes after the ignition switch has been turned to OFF, depending upon the accessory delay setting. Opening either front door will cancel this feature.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! An unlocked car is an invitation to thieves. Always remove the Key Fob from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder SENTRY KEY® The Sentry Key® Immobilizer system prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 the bulb check, it indicates that someone used an invalid Replacement Keys Key Fob to start the engine. Either of these conditions will NOTE: Only Key Fobs that are programmed to the result in the engine being shut off after two seconds. vehicle electronics can be used to start and operate the If the Vehicle Security Light turns on during normal vehicle.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location. This number is required for authorized dealer replacement of Key Fobs. Duplication of Key Fobs may be performed at an authorized dealer, this procedure consists of programming a blank Key Fob to the vehicle electronics. A blank Key Fob is one that has never been programmed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 VEHICLE SECURITY ALARM — IF EQUIPPED To Arm The System The Vehicle Security Alarm monitors the vehicle doors Follow these steps to arm the Vehicle Security Alarm: for unauthorized entry and the ignition switch for unau1. Make sure the vehicles ignition is cycled to the “OFF” thorized operation.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Push the LOCK button on the exterior Passive Entry • Cycle the vehicle ignition system out of the OFF position. Door Handle with a valid Key Fob available in the • For vehicles equipped with Keyless Enter-N-Go™, same exterior zone (refer to ⬙Keyless Enter-N-Go™⬙ push the Keyless Enter-N-Go™ START/STOP butin ⬙Things To Know Before Starting Your Vehicle⬙ for ton (requires at least one valid Key Fob in the further information). vehicle).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • When the Vehicle Security Alarm is armed, the interior Tamper Alert power door lock switches will not unlock the doors. If something has triggered the Vehicle Security Alarm in The Vehicle Security Alarm is designed to protect your your absence, the horn will sound three times and the vehicle; however, you can create conditions where the exterior lights blink three times when you unlock the system will give you a false alarm. If one of the previ- doors.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The lights will fade to off after approximately 30 seconds, REMOTE KEYLESS ENTRY (RKE) — IF or they will immediately fade to off once the ignition EQUIPPED switch is turned to ON/RUN from the OFF position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Using The RKE Transmitter Three-button RKE transmitters will provide basic UNLOCK, LOCK and PANIC functions. Key Fob With Three-Button RKE Transmitter Two RKE transmitters may be supplied with the vehicle.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE (optional), power sliding doors, Remote Start feature (optional). Some features can be programmed to the customers preferences. For example, flash headlights or sound horn on LOCK. Remote Unlock Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s side or twice to unlock all doors and liftgate. This will also turn on the Illuminated Entry system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • For vehicles not equipped with the EVIC, the Remote NOTE: Pressing the LOCK button on the RKE transmitUnlock feature can be enabled or disabled by perform- ter while you are inside the vehicle will activate the ing the following steps: Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. 1. Perform this operation while standing outside the Press the UNLOCK button to deactivate the Vehicle vehicle.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmitfollowing steps: ter while you are in the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security 1. Perform this operation while standing outside the Alarm activated will cause the alarm to sound. Press the vehicle. UNLOCK button to deactivate the Vehicle Security 2. Press the LOCK button on a programmed RKE trans- Alarm.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If equipped with a rear interior switch on the left rear pillar, pushing this switch once will close the liftgate only. • When you turn off the Panic Alarm by pressing the The liftgate cannot be opened from this switch. PANIC button a second time, you may have to move closer to the vehicle due to the Radio Frequency (RF) If the vehicle is locked and Vehicle Security Alarm is armed, using RKE transmitter to open the power liftgate noises of the system.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the vehicle is locked and the Vehicle Security Alarm is armed, pressing the LEFT Power Sliding Door button twice unlocks the power sliding door and disarms Vehicle Security Alarm. Power Open/Close Right Power Sliding Door — If Equipped Turn Off Flash Lights With RKE Lock — If Equipped This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter. This feature can be turned on or turned off.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 2. Press and hold the UNLOCK button on a programmed Programming Additional Transmitters RKE transmitter for at least 4 seconds, but no longer If you do not have a programmed RKE transmitter, than 10 seconds. Then, press and hold the LOCK contact your authorized dealer for details. button while still holding the UNLOCK button. Transmitter Battery Replacement 3. Release both buttons at the same time. The recommended replacement battery is one CR2032 4.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Remove the emergency key by sliding the mechanical 2. Insert the tip of the emergency key or a #2 flat blade latch at the top of the RKE transmitter sideways with screwdriver into the slot and gently pry the two halves your thumb and then pull the key out with your other of the RKE transmitter apart. Make sure not to damage hand. the seal during removal.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 4. To assemble the RKE transmitter case, snap the two halves together. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If your RKE transmitter fails to operate from a normal NOTE: distance, check for these two conditions: • The vehicle must be equipped with an automatic transmission to be equipped with Remote Start. 1. A weak battery in the transmitter. The expected life of the battery is a minimum of three years. • Obstructions between the vehicle and the Key Fob may reduce this range. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 • Ignition key removed from ignition switch • Battery at an acceptable charge level • RKE PANIC button not pressed • System not disabled from previous remote start event • Vehicle theft alarm not active • Ignition in Off position (Keyless Enter-N-Go™) WARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The EVIC message stays active until the ignition is turned • For security, power window and power sunroof operation (if equipped) are disabled when the vehicle is to the ON/RUN position. in the Remote Start mode. To Enter Remote Start Mode • The engine can be started times (two 15 minutes cycles) with the RKE transmitter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • For vehicles not equipped with the Keyless Enter-NGo™ feature, the ignition switch must be in the Before the end of the 15-minute cycle, press and release ON/RUN position in order to drive the vehicle. the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if • For vehicles not equipped with the Keyless Enter-Nequipped).
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Cancel Remote Start To Turn Off The Engine While In Remote Start Remote Starting will also cancel if any of the following Mode Press and release the REMOTE START button one time or occur: allow the engine to run for the entire 15 minute cycle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 DOOR LOCKS Manual Door Locks Lock the front doors by pushing down on the lock knobs on each door trim panel. 2 If the lock knob is down when you shut either front door, the door will lock. Make sure the keys are not inside the vehicle before closing the door. Manual Door Lock If the lock knob is rearward when you shut either side sliding door, the door will lock. Make sure the keys are not inside the vehicle before closing the door.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) Sliding Door Lock WARNING! • For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle. (Continued) • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 If you press the power door lock switch while the Key A power door lock switch is on each front door trim Fob is in the ignition, and any front door is open, the power locks will not operate. This prevents you from panel. Use this switch to lock or unlock the doors. accidentally locking your keys in the vehicle. Removing the Key Fob or closing the door will allow the locks to operate.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Door Locks — If Equipped When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The auto door lock feature can be enabled or disabled by your authorized dealer per written request of the customer. Please see your authorized dealer for service.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 On vehicles equipped with the optional Electronic Ve- NOTE: hicle Information Center (EVIC), refer to “Electronic • Passive Entry may be programmed ON/OFF; refer to Vehicle Information Center (EVIC)/Personal Settings “Electronic Vehicle Information Center (EVIC)/ (Customer-Programmable Features)” in “Understanding Personal Settings (Customer-Programmable FeaYour Instrument Panel” for further information.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Driver’s Side: With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the driver’s door handle, grab the driver’s front door handle to unlock the driver’s door automatically. The interior door panel lock knob will raise when the door is unlocked. NOTE: If “Unlock All Doors 1st Press” is programmed all doors will unlock when you grab hold of the driver’s front door handle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Preventing Inadvertent Locking Of Passive Entry RKE To Enter The Liftgate Transmitter In Vehicle With a valid Passive Entry RKE transmitter within 5 ft To minimize the possibility of unintentionally locking a (1.5 m) of the liftgate, cycle the handle to open the liftgate Passive Entry RKE transmitter inside your vehicle, the and pull the liftgate open with one fluid motion.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Vehicle’s Doors With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handle, press the door handle LOCK button to lock all four doors. Do NOT grab the door handle, when pressing the door handle lock button. This could unlock the door(s).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 NOTE: WINDOWS • After pressing the door handle LOCK button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Power Window switches will also remain active You can control either the front or rear windows using for up to 10 minutes after the ignition switch has been switches located on the driver’s door trim panel. The turned to OFF, depending upon the accessory delay setting. Opening a front door will cancel this feature.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 switches will operate only when the ignition switch is in the ON/RUN or ACC position and during power accessory delay. 2 Power Window Lockout Switch Front Passenger Power Window Switch There is a single switch on the front passenger’s door Front Passenger Power Door Switches trim panel which operates the passenger door window and a set of switches that lock and unlock all doors.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto-Down Feature — If Equipped To stop the window from going all the way up during the Auto Up operation, push down on the switch briefly. The front window switches may be equipped with an Auto-Down feature. Press the window switch past the To close the window part way, lift the window switch to detent, release, and the window will go down automatically. the first detent and release when you want the window to stop.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 WARNING! There is no anti-pinch protection when the window is almost closed. To avoid personal injury be sure to clear your arms, hands, fingers and all objects from the window path before closing. Sliding Side Door Power Window Switch — If Equipped Second row passengers may open and close the sliding door window by a single switch on the door handle assembly.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occurrence and can be minimized. If the rear windows are open and buffeting occurs, open the front and rear windows together to minimize the buffeting.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 To keep your door operating properly, observe the fol- NOTE: The left side sliding door cannot be opened lowing guidelines: while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the • Always open the door smoothly. fuel door. • Avoid high impacts against the door stop when opening the door.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Press the button on the RKE transmitter twice within five seconds to open a power sliding door. When the door is fully open, pressing the button twice within five seconds a second time will close the door. There are power sliding side door switches located on the B-pillar trim panel, just in front of the power sliding door for the rear seat passengers and in the overhead console for the driver and passengers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 To avoid unintentional operation of the power sliding • If the power sliding side door is not in the full open or close position, it will fully open when a power sliding doors from the rear seats, press the power sliding door door switch is pressed. To close the door, wait until it master lock button, located in the overhead console, to is fully open and then press the switch again. disable the switches and handles for the rear seat passengers.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Sliding Side Door Open Flash You can turn the feature back on by repeating the previous procedure. The left and right exterior hazard lights will flash for 12 seconds when either sliding door is opened. This will Power Sliding Side Door Master Lock Switch alert other drivers in the area that passenger(s) could be To provide a safer environment for small children riding entering or exiting the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Sliding Side Door Child Protection Lock To provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a Child Protection Door Lock system. NOTE: When the Child Protection Door Lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Engage The Child Protection Door Lock NOTE: • 2. Slide the Child Protection Door Lock control inward (toward the vehicle) to engage the Child Protection Door Lock. • 1. Open the sliding side door. Child Protection Door Lock 3. Repeat Steps 1 and 2 on the opposite sliding door. After engaging the Child Protection Door Lock, always test the door from the inside to make certain it is in the desired position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! Avoid trapping anyone in the vehicle in a collision. Remember that the sliding doors can only be opened from the outside door handle or the switches located on the B-Pillar trim panel just in front of the power sliding door when the Child Protection Door Locks are engaged. NOTE: • After setting the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE On vehicles equipped with power locks, the liftgate can be unlocked using the Remote Keyless Entry (RKE) transmitter button, or by activating the power door lock switches located on the front doors. To open the liftgate, press the liftgate release handle located on the underside of the license plate bar and pull the liftgate open with one fluid motion.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Power Liftgate — If Equipped The power liftgate may be opened manually or by using the button on the Remote Keyless Entry (RKE) transmitter. Press the button on the transmitter twice within five seconds, to open the power liftgate. When the liftgate is fully open, pressing the button twice within five seconds, a second time, will close the liftgate. 2 The power liftgate may also be opened and closed by pressing the button located on the overhead console.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power liftgate may be closed by pressing the button, and several audible beeps will occur to signal that the located in the upper left trim in the liftgate opening. liftgate is opening or closing. Pushing once will only close the liftgate. This button cannot be used to open the liftgate. WARNING! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • During power operation, whether liftgate is fully open • If the power liftgate encounters multiple obstructions or fully closed, the liftgate chime will beep several within the same cycle, the system will automatically stop and must be opened or closed manually. times indicating power operation is in progress. • The power liftgate must be in the full open or close positions for any of the buttons to operate.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • An energy-absorbing steering column and steering wheel Some of the most important safety features in your vehicle are the restraint systems: • Knee bolsters/blockers for front seat occupants OCCUPANT RESTRAINTS • Three-point lap and shoulder belts for all seating • Front seat belts incorporate pretensioners that may positions enhance occupant protection by managing occupant energy during an impact event • Advanced Front Air Bags for driver and front passen•
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and Tether for CHildren (LATCH) feature also can be used to hold infant and child restraint systems. For more information on LATCH, refer to Lower Anchors and Tether for CHildren (LATCH). WARNING! • Never place a rear facing infant seat in front of an air bag.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If a child from 2 to 12 years old (not in a rear facing child 5. If the air bag system in this vehicle needs to be seat) must ride in the front passenger seat, move the seat modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided as far back as possible and use the proper child restraint. under ⴖIf You Need Assistanceⴖ. (Refer to “Child Restraints”).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 WARNING! (Continued) WARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Supplemental Side Air Bag Inflatable Curtain (SABIC) and Seat-Mounted Side Air Bags (SAB) also need room to inflate.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Buckle up even though you are an excellent driver, even belt will lock and reduce the risk of you striking the on short trips. Someone on the road may be a poor driver inside of the vehicle or being thrown out. and cause a collision that includes you. This can happen far away from home or on your own street. WARNING! Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 WARNING! (Continued) • Wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too. • Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly. In a sudden stop you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly. 4. Position the lap belt across your thighs, below your abdomen.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt may not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Pull the strap down and secure the small latch plate of anywhere on the anchorage. To move the anchorage downthe lap belt into the small buckle until you hear a “click”. ward, squeeze the actuation buttons while simultaneously pushing down on the anchorage assembly. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average you will Second Row Bench Seat prefer a lower position, and if you are taller than average Driver you will prefer a higher position. When you release the First Row N/A anchorage, try to move it up or down to make sure that Second Row ALR it is locked in position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Second Row Captains Chairs First Row Second Row SnG Seating Third Row Driver N/A ALR Center N/A N/A Passenger ALR ALR ALR Cinch ALR out only the amount of webbing necessary to comfortably wrap around the occupant’s mid-section. Slide the latch plate into the buckle until you hear a ⬙click.⬙ Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically prelocked.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Seat Belt Pretensioners Supplemental Active Head Restraints (AHR) The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision. Pretensioners work for all size occupants, including those in child restraints.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact. However if during a front impact, a secondary rear impact occurs, the AHR may deploy based on the severity and type of the impact.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 CAUTION! 1. Grasp the deployed AHR from the rear seat. All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 3 — Final Downward Movement To Engage Locking Mechanism 1 — Downward Movement 2 — Rearward Movement 4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Enhanced Seat Belt Use Reminder System (BeltAlert®) BeltAlert® is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert®) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and remain on until both front seat belts are fastened.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front passenger seat BeltAlert® is not active when the front passenger seat is unoccupied. BeltAlert® may be triggered when an animal or heavy object is on the front passenger seat or when the seat is folded flat (if equipped). It is recommended that pets be restrained in the rear seat (if equipped) in pet harnesses or pet carriers that are secured by seat belts, and cargo is properly stowed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 WARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug and in the recommended seating positions. Remove and store the extender when not needed. 2 Supplemental Restraint System (SRS) — Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat belt restraint systems.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Driver and Passenger Advanced Front Air and rear passengers sitting next to a window. The SABIC Bags are certified to new Federal regulations. air bags are located above the side windows and their covers are also labeled: SRS AIRBAG. The Advanced Front Air Bags have a multistage inflator design.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 • Air Bag Warning Light Advanced Front Air Bag Features • Steering Wheel and Column The Advanced Front Air Bag system has multistage driver and front passenger air bags. This system provides output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), which may receive information from the front impact sensors.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only. NOTE: WARNING! Do not use accessory seat covers or place objects between you and the side air bags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Air Bag Inflatable Curtain (SABIC) • Being too close to the SAB and SABIC air bags during deployment could cause you to be severely injured or killed. SABIC air bags may offer side-impact and vehicle rollover protection to front and rear seat outboard occupants The system includes side impact sensors that are caliin addition to that provided by the body structure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 WARNING! (Continued) • Do not use accessory seat covers or place objects between you and the side air bags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury. • Your vehicle is equipped with SABIC air bags, do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE bags, SABs, Supplemental Driver Side Knee Air Bag, and front seat belt pretensioners, as required, depending on The Knee Impact Bolsters help protect the knees of the several factors, including the severity and type of impact. driver and front passenger, and position the front occupants for the best interaction with the Advanced Front Advanced Front Air Bags and Supplemental Driver Side Air Bags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Side Knee Air Bag may deploy in crashes with little The ORC contains a backup power supply system that vehicle front-end damage but that produce a severe may deploy the air bags even if the battery loses power or it becomes disconnected prior to deployment. initial deceleration. The side air bags will not deploy in all side collisions. Side air bag deployment will depend on the severity and type of collision.
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Supplemental Driver Side Knee Air Bag. The trim cover separates and folds out of the way allowing the air bag to inflate to the full size. The air bag fully inflates in about 15 to 20 milliseconds. at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the side air bag inflates. This especially applies to children.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE positioned in the area where the side curtain air bag event the ORC will determine whether to have the inflates. This especially applies to children. The side Enhanced Accident Response System perform the followcurtain air bag is only about 3-1/2 in (9 cm) thick when ing functions: it is inflated. • Cut off fuel to the engine.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system. If you do have a collision which deploys the air bags, any or all of the following may occur: bag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Air Bag System WARNING! (Continued) WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Air Bag Warning Light NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good.
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Whether or not the driver and passenger safety belts To read data recorded by an EDR, special equipment is were buckled/fastened; required, and access to the vehicle or the EDR is needed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 There are different sizes and types of restraints for • http://www.tc.gc.ca/eng/roadsafety/safedriverschildren from newborn size to the child almost large childsafety-index-53.htm enough for an adult safety belt. Always check the child seat Owner’s Manual to make sure you have the correct WARNING! seat for your child.
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Summary Of Recommendations For Restraining Children In Vehicles Infants and Toddlers Small Children Larger Children Children Too Large for Child Restraints Child Size, Height, Weight Or Age Children who are two years old or younger and who have not reached the height or weight limits of their child restraint Children who are at least two years old or who have out-grown the height or weight limit of their rear-facing child restraint Children who have out-g
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Infants And Child Restraints Safety experts recommend that children ride rearwardfacing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. Two types of child restraints can be used rearward-facing: infant carriers and convertible child seats. The infant carrier is only used rearward-facing in the vehicle.
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Older Children And Child Restraints Children who are two years old or who have outgrown their rear-facing convertible child seat can ride forwardfacing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction are for children who are over two years old or who have outgrown the rear-facing weight or height limit of their rear-facing convertible child seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Children Too Large For Booster Seats 5. Can the child stay seated like this for the whole trip? Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat.
102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Child + Child Restraint Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child Restraint Forward-Facing Child Restraint Up to 65 lbs (29.5 kg) More than 65 lbs (29.5 kg) Up to 65 lbs (29.5 kg) More than 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 Lower Anchors And Tethers For Children (LATCH) Restraint System Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle Second Row Bench Second Row Captains Chairs • • Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 Child Restraint LATCH Positions What is the weight limit (child’s weight + weight of the child restraint) for using the LATCH anchorage system to attach the child restraint? 65 lbs (29.
106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Can two child restraints be attached using a common lower LATCH anchorage? No Can the rear-facing child restraint touch the back of the front passenger seat? Yes Can the head restraints be removed? Yes Never “share” a LATCH anchorage with two or more child restraints.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages In addition, there are tether strap anchors located behind each rear seatback, near to the floor.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage. Forward-facing child restraints and some rear-facing infant restraints will also be equipped with a tether strap.
110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Always follow the directions of the child restraint 3. Place the child seat between the lower anchorages for that seating position. For some second row seats, you manufacturer when installing your child restraint. Not may need to recline the seat and/or raise the head all child restraint systems will be installed as described restraint to get a better fit. If the rear seat can be moved here.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 6. Tighten all of the straps as you push the child restraint rearward and downward into the seat. Remove slack in the straps according to the child restraint manufacturer’s instructions. How To Stow An Unused ALR Seatbelt When using the LATCH attaching system to install a child restraint, stow all ALR seat belts that are not being used by other occupants or being used to secure child 7. Test that the child restraint is installed tightly by restraints.
112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • Child restraint anchorages are designed to withstand only those loads imposed by correctly-fitted child restraints.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113 Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle 2 Second Row Bench Second Row Captains Chair
114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems What is the weight limit (child’s weight + weight of the child restraint) for using the Tether Anchor with the seat belt to attach a forward facing child restraint? Can the rear-facing child restraint touch the back of the front passenger seat? Weight limit of the Child Restraint Can the head restraints be removed? Yes Can the buckle stalk be twisted to tighten the seat belt against the belt path of the child restraint? Yes Yes
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 115 5. To lock the seat belt, pull down on the shoulder part of the seat belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing Place the child seat in the center of the seating to retract back into the retractor. As the webbing position. For some second row seats, you may need to retracts, you will hear a clicking sound.
116 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 9. Test that the child restraint is installed tightly by 2. Next, pull enough of the seat belt webbing from the retractor to pass it through the belt path of the child pulling back and forth on the child seat at the seat belt restraint. Do not twist the belt webbing in the belt path. It should not move more than 1 inch (25.4 mm) path. in any direction. Any seat belt system will loosen with time, so check the 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117 6. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25 mm) in any direction. If the belt still cannot be tightened after you shorten the buckle, disconnect the latch plate from the buckle, turn the buckle around one half turn, and insert the latch plate into the buckle again.
118 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts. If not possible, lower the head restraint and pass the tether strap around the outboard side of the head restraint. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 119 WARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap. • If your vehicle is equipped with a split rear seat, make sure the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap.
120 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE COMMERCIAL CARGO VEHICLES (NO FACTORY INSTALLED REAR SEATS) — IF EQUIPPED Commercial cargo vehicles are not designed for use as a family vehicle and are not intended for carrying children in the front passenger seat. However, if you must carry a child in a vehicle without a rear seat, the passenger seat should be moved to the full rearward position and the child must be in a proper restraint system based on its age, size and weight.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 121 3. Using the hook attached to the child restraint tether strap, attach the child restraint tether strap to the metal anchor on the lower rear of the front passenger There are different sizes and types of restraints for seat. children from newborn size to the child almost large enough for an adult safety belt. Use the restraint that is 4. Following the child seat manufacturer’s instructions, correct for your child.
122 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 123 SAFETY TIPS WARNING! (Continued) Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
124 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • If you are required to drive with the trunk/liftgate/ rear doors open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recirculation mode. • If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. damaged, deteriorated, or mispositioned parts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 125 Air Bag Warning Light The light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Defroster Check operation by selecting the defrost mode and place the blower control on high speed.
126 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle. • Never put floor mats or other floor coverings on top of already installed floor mats. Additional floor mats and other coverings will reduce the size of the pedal area and interfere with the pedals.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 127 Periodic Safety Checks You Should Make Outside The Vehicle Door Latches Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 ▫ Inside Day/Night Mirror — If Equipped . . . .136 ▫ Automatic Dimming Mirror — If Equipped . . .137 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . .138 ▫ Driver’s Outside Automatic Dimming Mirror — If Equipped. . . . . . . . . . . . . . . . . . . . . . . . . .138 ▫ Outside Mirrors Folding Feature . . . . . . . . . .138 ▫ Power Mirrors — If Equipped . . . . . . . . . . . .
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Uconnect® PHONE — IF EQUIPPED . . . . . . . .152 䡵 SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . .154 ▫ Power Seats — If Equipped . . . . . . . . . . . . . .189 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . .161 ▫ Power Lumbar — If Equipped . . . . . . . . . . . .192 ▫ Uconnect® Phone Features . . . . . . . . . . . . . .164 ▫ Heated Seats — If Equipped . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 ▫ Manually Folding Third Row Seats — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .216 ▫ Plastic Grocery Bag Retainer Hooks. . . . . . . . .220 䡵 DRIVER MEMORY SEAT — IF EQUIPPED . . . .220 ▫ Setting Memory Positions And Linking RKE Transmitter To Memory . . . . . . . . . . . . . . . . .221 ▫ Easy Entry/Exit Seat (Available With Memory Seat ONLY) . . . . . . . . . . . . . . . . . . . . . . . . . .223 ▫ Headlight Delay — If Equipped . . . .
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 WINDSHIELD WIPER AND WASHERS . . . . . .235 ▫ To Set A Desired Speed . . . . . . . . . . . . . . . . .245 ▫ Intermittent Wiper System . . . . . . . . . . . . . . .236 ▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . .245 ▫ Windshield Wiper Operation . . . . . . . . . . . . .236 ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . .245 ▫ Windshield Washers. . . . . . . . . . . . . . . . . . . .236 ▫ To Vary The Speed Setting . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 ▫ Cleaning The ParkSense® System . . . . . . . . . .254 䡵 GARAGE DOOR OPENER — IF EQUIPPED . . .263 ▫ ParkSense® System Usage Precautions. . . . . . .254 ▫ Before You Begin Programming HomeLink® . .265 䡵 PARKVIEW® REAR BACK UP CAMERA — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . .256 ▫ Programming A Rolling Code . . . . . . . . . . . . .265 䡵 OVERHEAD CONSOLES . . . . . . . . . . . . . . . . .259 ▫ Front Overhead Console. . . . . . . . . .
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Closing Sunroof — Express. . . . . . . . . . . . . . .274 ▫ Super Console — If Equipped. . . . . . . . . . . . .283 ▫ Closing Sunroof — Manual Mode . . . . . . . . . .274 ▫ Premium Console Cupholders — If Equipped. . . . . . . . . . . . . . . . . . . . . . . . . .284 ▫ Pinch Protect Feature . . . . . . . . . . . . . . . . . . .274 ▫ Venting Sunroof — Express . . . . . . . . . . . . . .274 ▫ Sunshade Operation. . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 ▫ Coat Hooks . . . . . . . . . . . . . . . . . . . . . . . . .292 䡵 REAR WINDOW FEATURES . . . . . . . . . . . . . .301 ▫ Cargo Area Storage . . . . . . . . . . . . . . . . . . . .292 ▫ Rear Window Defroster . . . . . . . . . . . . . . . . .301 䡵 CONSOLE FEATURES . . . . . . . . . . . . . . . . . . .293 䡵 LOAD LEVELING SYSTEM — IF EQUIPPED . .302 ▫ Basic Console . . . . . . . . . . . . . . . . . . . . . . . .293 䡵 ROOF LUGGAGE RACK — IF EQUIPPED . . . .
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. 3 NOTE: This feature is disabled when the vehicle is moving in reverse.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors Driver’s Outside Automatic Dimming Mirror — If To receive maximum benefit, adjust the outside mirror(s) Equipped to center on the adjacent lane of traffic with a slight The driver’s outside mirror will automatically adjust for glare from vehicles behind you. This feature is controlled overlap of the view obtained on the inside mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 The power mirror controls consist of mirror select butThe power mirror controls are located on the driver-side tons and a four-way mirror control switch. To adjust a mirror, press either the L (left) or R (right) to select the door trim panel. mirror that you want to adjust. Power Mirrors — If Equipped NOTE: A light in the selected button will illuminate indicating the mirror is activated and can be adjusted.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature can be activated whenever you turn on the rear window defroster (if equipped). Refer to “Rear Window Features” in “Understanding The Features Of Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Resetting the Power Folding Outside Mirrors You may need to reset the power folding mirrors if the following occurs: • The mirrors are accidentally blocked while folding. • The mirrors are accidentally manually folded/ unfolded. • The mirrors come out of the unfolded position. • The mirrors shake and vibrate at normal driving speeds.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirrors — If Equipped BLIND SPOT MONITORING (BSM) — IF An illuminated vanity mirror is located on the sun visor. EQUIPPED To use the mirror, rotate the sun visor down and swing The Blind Spot Monitoring (BSM) system uses two radarthe mirror cover upward. The lights turn on automati- based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, cally.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Automatic Transmission Vehicles The BSM system sensors operate when the vehicle is in any forward gear or REVERSE and enters stand-by mode when the vehicle is in PARK. Manual Transmission Vehicles The BSM system sensors operate when the vehicle is in any gear and enters stand-by mode when the Park Brake is engaged, the vehicle is not in REVERSE, and the vehicle is stationary.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • The BSM system does NOT alert the driver about rapidly approaching vehicles that are outside the detection zones. • The BSM system detection zone DOES NOT change if your vehicle is towing a trailer. Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change. If the trailer or other object (i.e.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. 3 BSM Warning Light The BSM system monitors the detection zone from three different entry points (side, rear, front) while driving to see if an alert is necessary. The BSM system will issue an alert during these types of zone entries.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Rear Overtaking Traffic Vehicles that come up from behind your vehicle on either If you pass another vehicle slowly (with a relative speed of less than 15 mph (24 km/h) and the vehicle remains in side and enter the rear detection zone with a relative the blind spot for approximately 1.5 seconds, the warning speed of less than 30 mph (48 km/h). light will be illuminated.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicyclists, or animals.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radio volume.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Modes Of Operation Blind Spot Alert Lights/Chime Modes Of Operation With EVIC When operating in Blind Spot Alert Lights/Chime mode, the BSM system will provide a visual alert in the appropriate side view mirror based on a detected object. If the turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 When the system is in RCP, the system shall respond with both visual and audible alerts when a detected object is present. Whenever an audible alert is requested, the radio volume is reduced. Turn/hazard signal status is ignored; the RCP state always requests the chime.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect® PHONE — IF EQUIPPED Uconnect® Phone is a voice-activated, hands-free, invehicle communications system. Uconnect® Phone allows you to dial a phone number with your mobile phone using simple voice commands (e.g., “Call” ѧ “Mike” ѧ “Work” or “Dial” ѧ “248-555-1212”). Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect® Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation Voice commands can be used to operate the Uconnect® Phone and to navigate through the Uconnect® Phone menu structure. Voice commands are required after most Uconnect® Phone prompts. You will be prompted for a specific command and then guided through the available options. part of the command when you are asked for it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 To activate the Uconnect® Phone, simply push the The following are general phone to Uconnect® Phone button and follow the audible prompts for directions. pairing instructions: Uconnect® Phone sessions begin with a push of the 1. Push the button to begin. button on the radio control head. 2. After the “Ready” prompt and the following beep, say Cancel Command “Device Pairing.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You will then be asked to give your mobile phone a priority level between one and seven, with one being the highest priority. You can pair up to seven mobile phones to your Uconnect® Phone. However, at any given time, only one mobile phone can be in use, connected to your Uconnect® System. The priority allows the Uconnect® Phone to know which mobile phone to use if multiple mobile phones are in the vehicle at the same time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 or downloaded phonebook. To learn how to store a • Automatic download and update, if supported, begins as soon as the Bluetooth® wireless phone connection is name in the phonebook, refer to “Add Names to Your made to the Uconnect® Phone, for example, after you Uconnect® Phonebook.” start the vehicle.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • This downloaded phonebook cannot be edited or • When prompted, enter the number designation (e.g., “Home,” “Work,” “Mobile,” or “Other”). This will deleted on the Uconnect® Phone. These can only be allow you to store multiple numbers for each phoneedited on the mobile phone. The changes are transbook entry, if desired. ferred and updated to Uconnect® Phone on the next phone connection.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in NOTE: Editing phonebook entries is recommended the phonebook, call the number you just edited, or return when the vehicle is not in motion. Automatic downto the main menu. loaded phonebook entries cannot be deleted or edited. “Phonebook Edit” can be used to add another phone button to begin.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say “List Names” to hear a list of the entries in the phonebook from which you choose. To select one of the entries button while the from the list, press the Uconnect® Phone is playing the desired entry and say “Delete.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 List All Names In The Uconnect® Phonebook • Press the Phone Call Features The following features can be accessed through the Uconnect® Phone if the feature(s) are available on your • After the “Ready” prompt and the following beep, say mobile service plan. For example, if your mobile service “Phonebook List Names.” plan provides three-way calling, this feature can be • The Uconnect® Phone will play the names of all the accessed through the Uconnect® Phone.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer Or Reject An Incoming Call — Call Currently In Progress in progress. To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer to “Conference Call” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Conference Call Call Termination When two calls are in progress (one active and one on button until you hear a hold), press and hold the double beep indicating that the two calls have been joined into one conference call. To end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Continuation Uconnect® Phone Features Call continuation is the progression of a phone call on the Language Selection Uconnect® Phone after the vehicle ignition has been To change the language that the Uconnect® Phone is switched to OFF. Call continuation functionality availusing: able on the vehicle can be any one of three types: button to begin. • Press the 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Emergency Assistance NOTE: If you are in an emergency and the mobile phone is • The emergency number dialed is based on the country reachable: where the vehicle is purchased (911 for the U.S. and Canada and 060 for Mexico). The number dialed may • Pick up the phone and manually dial the emergency not be applicable with the available mobile service and number for your area. area.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To use your Uconnect® Phone System in an emergency, your mobile phone must be: • turned on, • paired to the Uconnect® System, • and have network coverage. Roadside Assistance/Towing Assistance If you need roadside assistance: • Press the button to begin. NOTE: You should program the desired Towing Assistance phone number using the Voice Command system. To do this, press the button and say “Setup,” followed by “Towing Assistance.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 “Send,” is also to be used for navigating through an automated customer service center menu structure, and This method is used in instances where one generally has to leave a number on a pager. to press numbers on the mobile phone keypad while navigating through an automated telephone system.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Barge In — Overriding Prompts Phone And Network Status Indicators The “Voice Command” button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “Would you like to pair a phone, clear a...,” you could press the button and say, “Pair a Phone” to select that option without having to listen to the rest of the voice prompt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect® Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List Paired Mobile Phone Names • Press the button to begin. • You can also press the button at any time while the list is being played, and then choose the phone that you wish to select. • After the “Ready” prompt and the following beep, say • The selected phone will be used for the next phone “Setup Phone Pairing.” call. If the selected phone is not available, the • When prompted, say “List Phones.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Things You Should Know About Your Uconnect® Phone Uconnect® Phone Tutorial • Press the button and say the “Voice Training,” “System Training,” or “Start Voice Training” command. To hear a brief tutorial of the system features, press the You can either press the Uconnect® Phone button to restore the factory setting or repeat the words and button and say “Uconnect® Tutorial.” phrases when prompted by the Uconnect® Phone.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE This will delete all phone pairing, phone book entries, • Low-to-medium vehicle speed and other settings in all language modes. The System will • Low road noise prompt you before resetting to factory settings. • Smooth road surface Voice Command • Fully closed windows • For best performance, adjust the rearview mirror to provide at least ½ inch (1 cm) gap between the • Dry weather condition overhead console (if equipped) and the mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 • It is not recommended to store similar sounding names Far End Audio Performance in the Uconnect® Phonebook. • Audio quality is maximized under: • Phonebook (Downloaded and Uconnect® Phone Lo• Low-To-Medium Blower Setting cal) name recognition rate is optimized when the • Low-To-Medium Vehicle Speed entries are not similar. • Numbers must be spoken in single digits. “800” must • be spoken “eight-zero-zero” not “eight hundred.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In a convertible vehicle, system performance may be 2. After the “Ready” prompt and the following beep, say “SMS Read” or “Read Messages.” compromised with the convertible top down Recent Calls 3. Uconnect® Phone will play the new text message for you. If your phone supports “Automatic Phonebook Download,” Uconnect® Phone can list your Outgoing, Incom- After reading a message, you can “Reply” or “Forward” ing and Missed Calls.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 To send a message, press the button while the 10. Thanks. system is listing the message and say “Send.” Uconnect® 11. See You in 15 minutes. Phone will prompt you to say the name or number of the person you wish to send the message to. 12. I am on my way. List of Preset Messages: 13. I’ll be late. 1. Yes. 14. Are you there yet? 2. No. 15. Where are we meeting? 3. Where are you? 16. Can this wait? 4. I need more direction. 17. Bye for now. 5. L O L.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Voice Text Reply Incoming Announcement ON/ Bluetooth® Communication Link OFF Mobile phones have been found to lose connection to the Turning the Voice Text Reply Incoming Announcement Uconnect® Phone. When this happens, the connection OFF will stop the system from announcing the new can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in incoming messages. Bluetooth® ON mode. button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 3
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 3
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Primary Alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location Voice Commands Primary Alternate (s) all call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Voice Commands Primary Alternate (s) help home language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book Voice Commands Primary Alternate (s) previous record again redial return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect® Tutorial voice training work yes 3
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information VOICE COMMAND — IF EQUIPPED This device complies with Part 15 of the FCC rules and Voice Command System Operation RSS 210 of Industry Canada.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 WARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. Pressing the Voice Command button while the system is speaking is known as “barging in.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To hear the first available Menu, press the Voice Com- Main Menu button and say “Help” or “Main Menu.” mand Start a dialogue by pressing the Voice Command button. You may say “Main Menu” to switch to the Commands main menu. The Voice Command system understands two types of commands, Universal commands and Local commands. In this mode, you can say the following commands: Universal commands are available at all times.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Radio AM • “Menu Radio” (to switch to the radio menu) To switch to the AM band, say “AM” or “Radio AM.” In • “Main Menu” (to switch to the main menu) this mode, you may say the following commands: Satellite Radio • “Frequency #” (to change the frequency) To switch to satellite radio mode, say “Sat” or “Satellite Radio.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Disc Mode Bluetooth® Streaming (BT) Mode To switch to the disc mode, say “Disc.” In this mode, you To switch to Bluetooth® Streaming (BT) mode, say may say the following commands: “Bluetooth Streaming.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 – “Continue” (to continue recording) • “Switch to system setup” – “Delete” (to delete the recording) • “Main menu setup” • “Play Memos” (to play previously recorded memos) — • “Switch to setup” During the playback you may press the Voice Com- In this mode, you may say the following commands: button to stop playing memos.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect® vehicle. Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 Power Seats — If Equipped Some models may be equipped with eight-way power seats for the driver and front passenger. The power seat switches are located on the outboard side of the seat. The switches control the movement of the seat cushion and the seatback.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions. Pull upward or push downward on the front or rear of the seat switch, the front or rear of the seat cushion will move in the direction of the switch. Release the switch when the desired position has been reached. Reclining The Seatback The angle of the seatback can be adjusted forward or rearward.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Power Lumbar — If Equipped Vehicles equipped with power driver or passenger seats may also be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Heated Seats — If Equipped Vehicles Equipped With Remote Start On some models, the front and rear seats may be On models that are equipped with remote start, the equipped with heaters located in the seat cushions. driver’s heated seat can be programmed through the Electronic Vehicle Information Center (EVIC) to come on during a remote start.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for HIGH, one for LOW and none for OFF. Press the switch once to select HIGH-level heating. Press the switch a second time to select LOW-level heating. Press the switch a third time to shut the heating elements OFF. Rear Heated Seats On some models, the second row seats are equipped with heaters.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 You can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for HIGH, one for LOW and none for OFF. Press the switch once to select HIGH-level heating. Press the switch a second time to select LOW-level heating. Press the switch a third time to shut the heating elements OFF.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE While sitting in the seat, pull up on the handle and slide Manual Reclining Seats — If Equipped the seat forward or rearward. Release the bar once you For models equipped with manual reclining seats, the have reached the desired position. Then, using body recline lever is located on the outboard side of the seat. pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 To recline, lean forward slightly, lift the lever, then push back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched. WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 For comfort the Active Head Restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer. • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things To Know Before Starting Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 Head Restraints — Third Row The head restraint in the center position can be raised and lowered for tether routing. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information. Stow ’n Go® Seating — If Equipped On vehicles equipped with Stow ’n Go® seating, the second and third row seats can be folded into the floor for convenient storage.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Seat will not stow in the storage bin unless the 5. Pull upward on the seatback recliner lever located on armrests are raised. the outboard side of the seat. 4. Slide the storage bin locking mechanism to the “LOCK” position and then pull up on the storage bin latch to open the cover.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 The non-adjustable head restraint and seatback will fold automatically during the seat tumble. No additional actuation is necessary.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The seat will automatically tumble into position for easy storage. Seat In Storage Bin 7. Close the storage bin cover. Tumbled Second Row Seat 6. Push the seat into the storage bin. CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 WARNING! In a collision, serious injury could result if the seat storage bin covers are not properly latched. • Do not drive the vehicle with the storage bin covers open. • Keep the storage bin covers closed and latched while the vehicle is in motion. • Do not use a storage bin latch as a tie down. To Unstow Second Row Seats 1. Pull up on the storage bin latch to open the cover. 2.
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Stow ’n Go® Seat — Folded And Latched Position To tumble or stow the seat from the folded and latched position: return the seatback and head restraint to the upright position. Then pull up on the seatback recliner lever on the outboard side of the seat to fold head rest and seatback and tumble seat forward. 1. Return the seatback to the upright position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 2. Return the head restraint to the upright position. Easy Entry Second Row The second row Stow ’n Go® seats allow easy entry to the third row seat or rear cargo area. Pull up on the seatback recliner lever on the outboard side of the seat. Raising The Head Restraint 3. Pull up on the seatback recliner lever on the outboard side of the seat to fold head rest and seatback and tumble seat forward.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The seat will automatically fold into position for easy entry into the third row. WARNING! In the event of a collision you could be injured if the seat is not fully latched. Quad Seats — If Equipped Both Quad seats are adjustable forward or rearward. The manual seat adjustment handle is located under the seat cushion at the front edge of each seat. Manual Seat Adjuster While sitting in the seat, pull up on the handle and slide the seat forward or rearward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold-Flat Easy Entry To fold the seat, lift the recliner lever to the full upward The Quad seats can be tilted forward for easy entry into position and push the seatback forward until it rests on the third row. With the Quad seat in the fold-flat position, the seat cushion. lift up on the easy entry lever located near the bottom of the seat and lift the seat forward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 For passengers seated in the third row, there is a pull strap located on the outboard side of the seat near the bottom of the seat back. Third row passengers can pull on the strap and push the Quad seat forward for folding the seatback and accessing the easy entry lever. Pull Strap For Third Row Passengers Removal The Quad seats can be removed if additional storage is needed.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Release levers are located on the rear leg assemblies, near While the bench seat does not stow in the floor, it is the floor. To remove the seat, squeeze each release handle and rotate downwards to deploy the wheels. A lock removable for added cargo space. indicator button pops up when the seat is unlocked. The seat assembly can now be removed from the vehicle and moved on its Easy Out® Rollers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 To reinstall the seat, align the seat into the detent positions on the floor. Squeeze the release handle and rotate upward until the lock indicator button returns into the handle. WARNING! 3 If not properly latched, the bench seats could become loose. Personal injuries could result. After reinstalling these seats, be sure the red indicator button on the release handles return into the handles.
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Lower the head restraint by pulling on the release strap marked “1” located on the outboard side of the head restraint. One Touch Folding Seat Third Row The rear switch bank allows multiple power folding and unfolding positions for the third row seats. Head Restraint Release Strap “1” Left and right third row seats can be folded individually The switch is only functional when the liftgate is open or together.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 NOTE: • Disconnect the center shoulder belt from the small buckle and lower the head restraints before attempting to fold/stow the power third row seats. • To abort seat operation while seat is in motion, press a different seat position selector switch to stop the seat. Once the seat stops moving, then the desired position can be selected.
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manually Folding Third Row Seats — If Equipped 1. Lower the center head restraint down to the seatback by pushing the button on the guide and pushing the head restraint down. 2. Lower the outboard head restraints by pulling on the release strap marked “1” located on the outboard side of the head restraint.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 3. Pull release strap marked “2” located on the rear of the 4. Pull release strap marked “3” to release the anchors. seat to lower the seatback.
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Pull release strap marked “4” and tumble the seat rearward into the storage bin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 To Unfold Third Row Seats WARNING! (Continued) 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 2. Pull release strap marked “2” to unlock the recliner. • Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the head restraints are in their upright positions when the seat is to be occupied. 3.
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all rear seats and some front seats. The floor supports the partial weight of the bagged goods. DRIVER MEMORY SEAT — IF EQUIPPED The Memory Buttons 1 and 2 on the driver’s door panel can be programmed to recall the driver’s seat, outside mirrors, adjustable brake and accelerator pedals, and radio station preset settings.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 Setting Memory Positions And Linking RKE Transmitter To Memory 6. Press and release the SET (S) button located on the driver’s door. NOTE: Each time the SET (S) button and a numbered 7. Within five seconds, press and release MEMORY button (1 or 2) is pressed, you erase the memory settings button 1 or 2 on the driver’s door. The next step must for that button and store a new one.
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 11. Repeat the above steps to set the next Memory 1, or 2). When a recall is cancelled, the driver’s seat, and position using the other numbered Memory button or the pedals stop moving. A delay of one second will occur before another recall can be selected. to link another RKE transmitter to memory. Memory Position Recall NOTE: Pressing the mirror adjust switch will cancel the memory mirror recall.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 To disable another RKE transmitter linked to either • When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) rearMemory Position, repeat Steps 1 to 5 for each RKE ward if the driver seat position is greater than or equal transmitter. to 2.7 in (67.7 mm) forward of the rear stop.
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Each stored memory setting will have an associated Easy Entry and Easy Exit Position. NOTE: The Easy Entry/Easy Exit feature can be enabled or disabled through the programmable features in the Electronic Vehicle Information Center (EVIC). If your vehicle is not equipped with an EVIC, your dealership can activate/deactivate this feature for you.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 12 in (30 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! Safety Lever Location Use the hood prop rod to secure the hood in the open position. Be sure the hood is fully latched before driving your vehicle.
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. The switch controls the operation of the headlights, parking lights, instrument panel lights, interior lights and the fog lights. Headlight Switch With Halo Control Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 Automatic Headlights — If Equipped This system automatically turns your headlights on or off based on ambient light levels. To turn the system on, turn the headlight switch to the extreme counterclockwise position aligning the indicator with the AUTO on the headlight switch. When the system is on, the Headlight Time Delay feature is also on. This means your headlights will stay on for up to 90 seconds after you turn the ignition switch OFF.
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When exiting the vehicle the driver can choose to have the headlights remain on for 30, 60 or 90 seconds or not remain on. To change the timer setting, see your authorized dealer. Lights-On Reminder If the headlights or the parking lights are left on, or if the dimmer control is in the extreme top position after the ignition switch is turned OFF, a chime will sound when The headlight delay time is programmable on vehicles the driver’s door is opened.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 Front Fog Lights — If Equipped To activate the front fog lights, turn on the parking lights or the low beam headlights and push in the headlight switch control knob. Pressing the headlight switch control knob in a second time will turn the front fog lights off. 3 Dimmer Controls The dimmer switch is located next to the headlight switch.
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The ignition must be cycled to the OFF position Rotate the left dimmer control completely upward to the for this feature to operate. second detent (extreme top position) to turn on the Interior Lighting Off interior lights. The interior lights will remain on when the Rotate the left dimmer control to the off position (extreme dimmer control is in this position. bottom).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 The Halo control switch is located to the right of the Multifunction Lever dimmer switch. The multifunction lever is located on the left side of the steering column. 3 Halo Control To activate the Halo lights, rotate the Halo switch control upward or downward to increase or decrease the lighting.
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The multifunction lever controls the: Turn Signal Warning • Turn Signals • Flash-To-Pass If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for about 1 mile (1.6 km) with the turn signals on, a chime will sound to alert the driver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 NOTE: Broken, muddy or obstructed headlights and taillights of vehicles in the field of view will cause You can signal another vehicle with your headlights by headlights to remain on longer (closer to the vehicle). lightly pulling the multifunction lever toward you.
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Push the multifunction lever away from you to switch 3. Rotate the headlight switch clockwise from the AUTO to the on position. the headlights to the high beam position. Refer to “Multifunction Lever” in this section for further inforBattery Protection mation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 NOTE: Always remove any buildup of snow that preThe wipers and washers are operated by a switch within vents the windshield wiper blades from returning to the the multifunction lever. Rotate the end of the multifunc- off position. If the windshield wiper switch is turned off and the blades cannot return to the off position, damage tion lever to select the desired wiper speed. to the wiper motor may occur.
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System Windshield Washers Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the multifunction lever to the first detent position, and then turn the end of the lever to select the desired delay interval.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 Rear Wiper And Washer Rotating the rotary ring to the first detent activates the rear intermittent wipers. To activate the washers, rotate the rotary ring fully forward and the washers will spray until the ring is released, and then resume the intermittent interval. NOTE: Rear window wipers function in the intermittent wiper speed only. Rain Sensing Wipers — If Equipped The sensitivity of the system is adjustable from the multifunction lever.
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Rain Sensing feature can be turned on and off • Neutral Wipe Inhibit — The Rain Sensing feature will through the EVIC (if equipped).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column. To unlock the steering column, push the lever downward (toward the floor). To tilt the steering column, move the steering wheel upward or downward as desired.
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The heated steering wheel switch is located on the switch The steering wheel contains a heating element that helps bank below the climate controls. warm your hands in cold weather. The heated steering Press the switch to turn on the heated wheel has only one temperature setting. Once the heated steering wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 Vehicles Equipped With Remote Start WARNING! (Continued) On models that are equipped with remote start, the heated steering wheel can be programed to come on during a remote start. Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further information. • Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material.
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The switch is located on the left side of the steering Press the switch rearward to move the pedals rearward column. (toward the driver). • The pedals can be adjusted with the ignition OFF. • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Control System is on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 NOTE: • Always adjust the pedals to a position that allows full pedal travel. • Further small adjustments may be necessary to find the best possible seat/pedal position. • For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmitter or the memory switch on the driver’s door trim panel to return the adjustable pedals to pre-programmed positions.
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Electronic Speed Control buttons are located on the NOTE: In order to ensure proper operation, the Elecright side of the steering wheel. tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it.
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The speed increment shown is dependant on the speed of • If the button is continually pressed, the set speed will U.S. (mph) or Metric (km/h) units: continue to increase until the button is released, then the new set speed will be established. U.S. Speed (mph) To Decrease Speed • Pressing the RES (+) button once will result in a 1 mph increase in set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 NOTE: The Electronic Speed Control system maintains speed up and down hills. A slight speed change on • Pressing the SET (-) button once will result in a 2 km/h moderate hills is normal. decrease in set speed. Each subsequent tap of the On steep hills, a greater speed loss or gain may occur so button results in a decrease of 2 km/h. it may be preferable to drive without Electronic Speed • If the button is continually pressed, the set speed will Control.
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKSENSE® REAR PARK ASSIST — IF EQUIPPED The ParkSense® Rear Park Assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.g. during a parking maneuver. Refer to “ParkSense® System Usage Precautions” for limitations of this system and recommendations.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 The ParkSense® Warning Display is located in the Instru- ParkSense® Display ment cluster’s EVIC display. It provides both visual and When the vehicle is in REVERSE, the warning display audible warnings to indicate the distance between the will turn ON indicating the system status. rear fascia/bumper and the detected obstacle.
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 3 Fast Tone Continuous Tone
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 Enabling/Disabling ParkSense® ParkSense® can be enabled and disabled through the Customer-Programmable Features section of the EVIC. The available choices are: OFF, Sound Only, or Sound and Display. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you move the shift lever to the REVERSE position and ParkSense® is turned OFF, the EVIC will Clean the ParkSense® sensors with water, car wash soap display “PARK ASSIST SYSTEM OFF” message for as and a soft cloth. Do not use rough or hard cloths. Do not long as the vehicle is in REVERSE. scratch or poke the sensors. Otherwise, you could damage the sensors. • ParkSense®, when on, will reduce the radio volume when it is sounding a tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 object as a sensor problem, causing the “SERVICE PARK ASSIST SYSTEM” message to be displayed in the EVIC. CAUTION! • ParkSense® is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity.
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Before using ParkSense®, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles because the hitch ball will be much closer to the obstacle than the rear fascia when the loudspeaker sounds the continuous tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 When displayed, static grid lines will illustrate the width that will help indicate the distance to the rear of the of the vehicle while a dashed center-line will indicate the vehicle. The following table shows the approximate center of the vehicle to assist with aligning to a hitch/ distances for each zone: receiver.
258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • To avoid vehicle damage, ParkView® should only be used as a parking aid. The ParkView® camera is unable to view every obstacle or object in your drive path. • To avoid vehicle damage, the vehicle must be driven slowly when using ParkView® to be able to stop in time when an obstacle is seen. It is recommended that the driver look frequently over his/her shoulder when using ParkView®.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 OVERHEAD CONSOLES Front Overhead Console Two versions of the overhead console are available. The base front overhead console model featured fixed incandescent courtesy/reading lights, flip-down sunglass storage and conversation mirror.
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy/Interior Lighting Sunglass Storage (Non-Sunroof Only) At the forward end of the console are two courtesy lights (standard dome light has two buttons). The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 The door will slowly rotate to the full open position. 3 Conversation Mirror Position NOTE: From the “conversation mirror” position, the From this position, the door can be fully closed or, by door can only be closed. rotating upward about 3/4 of the way and releasing, To return to the full open position, the door must first be positioned for conversation mirror use. closed and then opened by pressing the latch again to Full Open Position release.
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Courtesy/Reading Lights — If Equipped The overhead console has two sets of courtesy lights. The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed. The courtesy lights also function as reading lights. Press in on each lens to turn these lights on while inside the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 Rear Console Halo Lighting The rear overhead console has recessed halo lighting around the perimeter of the console base. This feature provides additional lighting options while traveling and is controlled by the headlight switch. Refer to “Lights/ Halo Lights — If Equipped” in “Understanding the Features Of Your Vehicle” for further information.
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink® buttons, located on either the overhead console, headliner or sunvisor, designate the three different HomeLink® channels. The HomeLink® indicator is located above the center button. HomeLink® Buttons/Sunvisor/Headliner NOTE: HomeLink® is disabled when the Vehicle Security Alarm is active.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 Before You Begin Programming HomeLink® NOTE: Be sure that your vehicle is parked outside of the garage • Erasing all channels should only be performed when before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. 3. Simultaneously press and hold both the HomeLink® button you want to program and the hand-held transmitter button. Training The Garage Door Opener 1 — Door Opener 2 — Training Button 1. Cycle the ignition to the ON/RUN position. 4. Continue to hold both buttons and observe the indicator light.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 Firmly press and release the “LEARN” or “TRAIN- Reprogramming A Single HomeLink® Button ING” button. On some garage door openers/devices To reprogram a channel that has been previously trained, there may be a light that blinks when the garage door follow these steps: opener/device is in the LEARN/TRAIN mode. 1. Turn the ignition switch to the ON/RUN position. NOTE: You have 30 seconds in which to initiate the next 2.
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. • To program the two remaining HomeLink® buttons, repeat each step for each remaining button. DO NOT erase the channels. 5. Press and hold the programmed HomeLink® button and observe the indicator light.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 3. Continue to press and hold the HomeLink® button, while you press and release (“cycle”), your hand-held For programming transmitters in Canada/United States transmitter every two seconds until HomeLink® has that require the transmitter signals to “time-out” after successfully accepted the frequency signal. The indiseveral seconds of transmission.
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you unplugged the garage door opener/device for Using HomeLink® programming, plug it back in at this time. To operate, press and release the programmed HomeLink® button. Activation will now occur for the Reprogramming A Single HomeLink® Button programmed device (i.e., garage door opener, gate operaTo reprogram a channel that has been previously trained, tor, security system, entry door lock, home/office lightfollow these steps: ing, etc.,).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 Troubleshooting Tips If you are having trouble programming HomeLink®, here are some of the most common solutions: • Replace the battery in the original hand-held transmitter. • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. • Did you unplug the device for programming and remember to plug it back in? If you have any problems, or require assistance, please call toll-free 1-800-355-3515 or, on the Internet at www.
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located between the sun Canada RSS-210. Operation is subject to the following visors on the overhead console. two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause undesired operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 WARNING! WARNING! (Continued) • Never leave children unattended in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children. Do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE movement. The sunroof and sunshade will remain in a Pinch Protect Feature partially opened condition until the switch is pushed and This feature will detect an obstruction in the opening of held rearward again. the sunroof during Express Close operation. If an obstruction in the path of the sunroof is detected, the Closing Sunroof — Express sunroof will automatically retract.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 Sunshade Operation Sunroof Maintenance The sunshade can be opened manually. However, the Use only a non-abrasive cleaner and a soft cloth to clean sunshade will open automatically as the sunroof opens. the glass panel. NOTE: The sunshade cannot be closed if the sunroof is Ignition Off Operation open.
276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLETS — IF EQUIPPED Two 12 Volt (13 Amp) power outlets are located on the lower instrument panel, below the open storage bin. The driver-side power outlet is controlled by the ignition switch and the passenger-side power outlet is connected directly to the battery. The driver-side power outlet will also operate a conventional cigar lighter unit (if equipped with an optional Smoker’s Package).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your New Vehicle Limited Warranty.
278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On vehicles equipped with the Super Console the power outlets are located under the retractable cover. To access the power outlets push down on the cover and slide it toward the instrument panel. The outlet in the rear quarter panel near the liftgate and the upper outlet in the instrument panel are both controlled by the ignition switch. Each of these outlets can support 160 Watts (13 Amps). Do not exceed 160 Watts (13 Amps) for each of these outlets.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! CAUTION! (Continued) • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will degrade the battery even more quickly.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts. Certain high-end video games, such as Playstation3 and XBox360 will exceed this power limit, as will most power tools. The power inverter is designed with built-in overload protection. If the power rating of 150 Watts is exceeded, the power inverter will automatically shut down.
282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled, it may cause an electric shock and failure. Instrument Panel Cupholders The instrument panel cupholders are located in a pull-out drawer just above the lower storage bin. CUPHOLDERS There are cupholders located throughout the interior.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 variety of container types and sizes. Press down on the For rear passengers two cupholders are located in the pull-out drawer, located in the back of the Super Console. container to engage the cupholder retention features. Pull the drawer out to the first position to use the Super Console — If Equipped cupholders. On models equipped with the Super Console, there are two cupholders located in the center of the console.
284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Premium Console Cupholders — If Equipped Interior Bottle Holders On models equipped with premium center consoles, There are four bottle holders located in the interior. One there are four cupholders located on the top of the bottle holder is molded into each front interior door trim console. panels, and one bottle holder is molded into each side sliding interior door trim panel. Each holder accommodates up to a 20 oz (.6 L) plastic bottle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 Smoker’s Package Kit — If Equipped With the optional authorized dealer-installed Smoker’s Package Kit, a removable ash receiver is inserted into one of the two cupholders in the center front instrument panel. To install the ash receiver, align the receiver so the thumb grip on the lid is facing rearward. Press the ash receiver into either of the cup wells to secure. Pull upward on the ash receiver to remove for cleaning and/or storage.
286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Upper Glove Compartment Lower Glove Compartment To open the upper compartment, press in on the button, To open the lower compartment pull out on the release located on the left side of the upper door. The door will handle. automatically open. Lower Compartment Upper Compartment To close the compartment door, push downward on the door’s surface to latch the door closed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 Door Trim Panel Storage Front Door Storage Both interior front door panels have multiple pockets for storage. 3 WARNING! If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury.
288 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Umbrella Holder Second Row Floor Storage Bins An umbrella holder has been conveniently molded into The area below the floor covers, located in front of the the left front door entry scuff molding. second row seats, is available for storage. Umbrella Holder Storage Bin Cover Lock Release Pull up on the storage bin latch to open the cover. Slide the storage bin locking mechanism to the ⬙unlocked⬙ position to allow greater access to the storage bin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 CAUTION! The storage bin cover must lay flat and be locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. WARNING! In a collision, serious injury could result if the seat storage bin covers are not properly latched. • Do not drive the vehicle with the storage bin covers open. • Keep the storage bin covers closed and latched while the vehicle is in motion.
290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not operate the storage bin covers while the vehicle is in motion. • Do not use a storage bin latch as a tie down. Seat Storage Bin Cover Emergency Release Lever As a security measure, the Seat Storage Bin Cover has an Emergency Release Lever built into the latching mechanism. CAUTION! The storage bin cover must be flat and locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pushing on the glow-in-the-dark lever attached to the storage bin cover latching mechanism. 3 Center And Rear Overhead Console Storage — If Equipped The overhead storage system comes in several options. Overhead Console Features 1 — DVD* 2 — Rear HVAC 3 — Courtesy Lights 4 — Storage * If equipped, otherwise storage.
292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Coat Hooks Coat hooks are located along the headliner for the second and third row seating positions. The coat hook load limit is 10 lbs (4.5 kg). Exceeding the recommended load limit can cause the coat hooks to break or disengage from the vehicle. Cargo Area Storage The liftgate sill plate has a raised line with the statement “Load To This Line”. This line indicates how far rearward cargo can be placed without interfering with liftgate closing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 293 CONSOLE FEATURES • The cupholders are removable to access a large storage bin. There are three consoles available: Basic, Premium and Super. • The basic console is removable from the vehicle for additional floor space by removing the cap and clip at WARNING! the console base. Do not operate this vehicle with a console compartment lid in the open position. Driving with the console compartment lid open may result in injury in a collision.
294 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Align the console until the front anchor cup plug hole Premium Console — If Equipped is centered on the winch hole. The three-compartment console with sliding storage bin, 4. Reinstall the clip first and then while pushing down- sliding upper tray with storage and large console storage ward on the console with slight pressure, reinstall the bin offers multiple configurations. cover plug. • Four cupholders with dishwasher safe liners for clean5.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 295 • Multiple adjustments • Removable from vehicle for additional floor space The top and center console sections slide forward and rearward to provide added user comfort. A one-piece cup holder insert for both cavities can easily be removed for cleaning. The cupholders will also accommodate large size cups and 20 oz (.6 L) bottles. 3 Position 1 shows the console closed with four cupholders and a convenient storage tray.
296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Position 2 shows the raised storage tray revealing a large Dual Storage Bins storage area below. Position 3 shows the top portion of the console in a rearward position. This is accomplished by lifting the upper most latch at the front of the console. This provides easy access to the storage area below and provides two of the four cupholders for the second row passengers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 297 Position 4 shows the complete console in its rearmost To Remove The Premium Floor Console position. Again, lifting second latch handle at the front of 1. Pull up on the bottom release handle in the front of the the console, allows complete access to a lower storage bin console. and provides additional cupholders for rear passengers. 2. Lift the rear of the console up several inches/ centimeters. 3. Pull rearward to disengage from floor and remove console.
298 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! In an accident, serious injury could result if the removable floor console is not properly installed. Always be sure the removable floor console is fully latched. Super Console — If Equipped The Super Console contains multiple storage areas, front lower pass through, top forward bin, top rearward bin and rear pull out drawer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 299 NOTE: The front cupholder light ring and pass through lighting is controlled by a dimming switch located on the instrument panel, refer to “Lights” in “Understanding The Features Of Your Vehicle” for further information. Located in the back of the super console is a storage drawer and cupholders for the rear passengers.
300 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES Rechargeable Flashlight The rechargeable flashlight is mounted on the right side of the cargo area. The flashlight snaps out of the bezel when needed. The flashlight features two bright LED light bulbs and is powered by a lithium battery that recharges when snapped back into place and the vehicle is either running or the key is in the accessory position. Press in on the flashlight to release it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 301 To operate the flashlight, press the switch once for high, REAR WINDOW FEATURES twice for low, and a third time to return to off. Rear Window Defroster The rear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on.
302 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 303 vehicle. Be sure the total load of cargo inside the vehicle The crossbars and side rails are designed to carry weight plus that on the external rack does not exceed the on vehicles equipped with a luggage rack. The load must maximum vehicle load capacity. not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars. NOTE: • Crossbars are error-proofed and cannot be deployed or stowed in the incorrect positions.
304 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Deploying The Crossbars CAUTION! To deploy the crossbars, completely loosen the thumb screws at both ends of the crossbar and lift the crossbar Use care when removing and handling the crossbars from its stowed position in the side rail. Repeat with to prevent damage to the vehicle. crossbar on the opposite side. Bend the crossbar supports at each end, taking care to keep hand clear of pivoting joint. Slide the thumb screw down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 305 NOTE: The crossbars are identical and can be placed in any two of the three deploy positions. 3 Deployed Position Then, position the crossbars across the roof.
306 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Make sure the directional arrows on the crossbars align with the directional arrows on the side rails. Set the crossbars into the deployed positions. Tightening Crossbar Stowing The Crossbars Reverse the procedure to stow the crossbars, again, taking care to keep hand clear of pivoting joint. Crossbars Once the crossbars are set into position, tighten the are identical and can be stowed in either rail nest. Once thumb screws completely.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 307 NOTE: Load should always be secured to crossbars first, with rail tie down loops used as additional securing points if needed. Tie loops are intended as supplementary tie down points only. Do not use ratcheting mechanisms with the tie loops. Rail Tie Loops CAUTION! • Check deployed crossbars frequently and retighten thumb screws as necessary. • To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity of 150 lb (68 kg).
308 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Long loads which extend over the windshield, such as wood panels or surfboards, or loads with large frontal area should be secured to both the front and rear of the vehicle. • Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift to a load.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 309 Gently pull up on the tab to raise the sun screen. To lower the sun screen, gently lift the tab upward to Continue pulling the sun screen until the tab is near the disengage the hooks, and feed the screen back into the top of the window. base sill. Once the screen is completely to the top of the window, extend the top bar of the sun screen over the two hooks attached to the top of the window.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 INSTRUMENT PANEL FEATURES . . . . . . . . . .316 ▫ EVIC Red Telltale Lights . . . . . . . . . . . . . . . .340 䡵 INSTRUMENT CLUSTER — BASE . . . . . . . . . .317 ▫ Oil Change Required . . . . . . . . . . . . . . . . . . .342 䡵 INSTRUMENT CLUSTER — PREMIUM . . . . . . .318 ▫ Fuel Economy . . . . . . . . . . . . . . . . . . . . . . . .343 䡵 INSTRUMENT CLUSTER DESCRIPTIONS . . . . .319 ▫ Vehicle Speed . . . . . . . . . . . . . . . . . . . . . . . .
312 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .346 䡵 Uconnect® 130 . . . . . . . . . . . . . . . . . . . . . . . .356 ▫ Vehicle Info (Customer Information Features) . . .346 ▫ Operating Instructions — Radio Mode . . . . . .356 ▫ Messages # . . . . . . . . . . . . . . . . . . . . . . . . . .347 ▫ Operation Instructions — CD MODE For CD And MP3 Audio Play . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 313 ▫ Operating Instructions (Uconnect® Phone) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .381 䡵 SETTING THE ANALOG CLOCK . . . . . . . . . . .382 䡵 iPod®/USB/MP3 CONTROL — IF EQUIPPED . .382 ▫ Connecting The iPod® Or External USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . .383 ▫ Using This Feature. . . . . . . . . . . . . . . . . . . . .384 ▫ Controlling The iPod® Or External USB Device Using Radio Buttons . . . . . . . . . . .
314 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ VES™ Remote Control — If Equipped . . . . . . .407 ▫ Information Mode Display . . . . . . . . . . . . . . .419 ▫ Blu-ray™ Player Remote Control — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .410 ▫ Numeric Keypad Menu . . . . . . . . . . . . . . . . .420 ▫ Remote Control Storage . . . . . . . . . . . . . . . . .412 ▫ Locking The Remote Control . . . . . . . . . . . . .413 ▫ Replacing The Remote Control Batteries. . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 315 䡵 CD/DVD/Blu-ray™ Disc MAINTENANCE . . . .436 ▫ Summer Operation . . . . . . . . . . . . . . . . . . . .455 䡵 RADIO OPERATION AND MOBILE PHONES . .437 ▫ Winter Operation. . . . . . . . . . . . . . . . . . . . . .455 䡵 CLIMATE CONTROLS . . . . . . . . . . . . . . . . . . .437 ▫ Vacation/Storage . . . . . . . . . . . . . . . . . . . . . .456 ▫ Manual Heating And Air Conditioning System — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . .
316 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 — Air Vents — Instrument Cluster — Shift Lever — Radio 5 — Analog Clock 6 — Upper Glove Compartment 7 — Lower Glove Compartment 8 — Climate Controls 9 — DVD – If Equipped 10 — Storage Bin 11 — Cup Holders 12 — Switch Bank 13 14 15 16 — — — — Ignition Switch Hood Release Dimmer Switch Headlight Switch
UNDERSTANDING YOUR INSTRUMENT PANEL 317 INSTRUMENT CLUSTER — BASE 4
318 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — PREMIUM
UNDERSTANDING YOUR INSTRUMENT PANEL 319 INSTRUMENT CLUSTER DESCRIPTIONS 1. Tachometer 4. Turn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated. This gauge measures engine revolutions per minute If the vehicle is driven more than 1 mile (1.6 km) (RPM x 1000). Before the pointer reaches the red area, with either turn signal on, a continuous chime will sound ease up on the accelerator to prevent engine damage. to alert you to turn the signal off.
320 UNDERSTANDING YOUR INSTRUMENT PANEL U.S. Federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service.
UNDERSTANDING YOUR INSTRUMENT PANEL 321 NOTE: Some of the above warnings will be displayed in noFUSE the Electronic Vehicle Information Center Display Area If the vehicle diagnostic system determines that the located in the instrument cluster. Ignition Off Draw (IOD) fuse is improperly installed, or Refer to ”Electronic Vehicle Information Center (EVIC) damaged, a “noFUSE” message will display in the odometer display area. For further information on fuses and Display — If Equipped” for further information.
322 UNDERSTANDING YOUR INSTRUMENT PANEL position. To reset the oil change indicator system (after 7. Anti-Lock Brake (ABS) Light performing the scheduled maintenance), perform the This light monitors the Anti-Lock Brake System following steps. (ABS). The light will turn on when the ignition 1. Turn the ignition switch to the ON/RUN position (do switch is turned to the ON/RUN position and not start the engine). may stay on for as long as four seconds. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 323 8. Tire Pressure Monitoring Telltale Light — If Equipped Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
324 UNDERSTANDING YOUR INSTRUMENT PANEL TPMS malfunction telltale after replacing one or more 9. Malfunction Indicator Light (MIL) tires or wheels on your vehicle, to ensure that the The Malfunction Indicator Light (MIL) is part of replacement or alternate tires and wheels allow the TPMS an Onboard Diagnostic system, called OBD, that to continue to function properly. monitors engine and automatic transmission control systems.
UNDERSTANDING YOUR INSTRUMENT PANEL 325 CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system. It also could affect fuel economy and driveability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions.
326 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: 12. Speedometer • The “ESC Off Indicator Light” and the “ESC Indicates vehicle speed. Activation/Malfunction Indicator Light” come on 13. Fuel Door Reminder momentarily each time the ignition switch is turned to ON/RUN. The arrow in this symbol is a reminder that the Fuel Filler Door is located on the left side of the • Each time the ignition is turned to ON/RUN, the vehicle. ESC system will be ON, even if it was turned off previously. 14.
UNDERSTANDING YOUR INSTRUMENT PANEL 327 dealer as soon as possible. Refer to “Occupant Restraints” 17. Vehicle Security Light — If Equipped in “Things To Know Before Starting Your Vehicle” for This light will flash at a fast rate for approxifurther information. mately 15 seconds, when the vehicle security 16. Shift Lever Indicator alarm is arming, and then will flash slowly until the vehicle is disarmed. The Shift Lever Indicator is self-contained within the instrument cluster.
328 UNDERSTANDING YOUR INSTRUMENT PANEL In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake and a brake pedal pulsation may be felt during each stop. The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system.
UNDERSTANDING YOUR INSTRUMENT PANEL 329 The light also will turn on when the parking brake is 20. Temperature Gauge applied with the ignition switch in the ON/RUN posiThe temperature gauge shows engine coolant temperation. ture. Any reading within the normal range indicates that NOTE: This light shows only that the parking brake is the engine cooling system is operating satisfactorily. applied. It does not show the degree of brake application.
330 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealer for service if your vehicle overheats. If you decide to look under the hood yourself, see “Maintaining Your Vehicle”. Follow the warnings under the Cooling System Pressure Cap paragraph. 21. Low Fuel Light switch is first turned to ON/RUN and remain on briefly as a bulb check.
UNDERSTANDING YOUR INSTRUMENT PANEL 331 Do not operate the vehicle until the cause is corrected. 25. Electronic Throttle Control (ETC) Light This light does not indicate how much oil is in the engine. This light informs you of a problem with the The engine oil level must be checked under the hood. Electronic Throttle Control (ETC) system. The 24.
332 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Transmission Temperature Warning Light During sustained high speed driving or trailer towing up long grades on hot days, the automatic transmission oil may become too hot. When the transmission overheat warning light turns on, you will experience reduced vehicle performance until the automatic transmission cools down. Once the transmission has cooled down and the light turns off, you may continue to drive normally.
UNDERSTANDING YOUR INSTRUMENT PANEL 333 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED The EVIC Menu items consists of the following: • Fuel Economy The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the • Vehicle Speed instrument cluster.
334 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by • UP Button pressing the following buttons mounted on the steering Press and release the UP button to scroll upwheel: ward through the main menu items (Fuel Economy, Vehicle Info, Tire PSI, Cruise, Messages, Units, System Setup). • DOWN Button Press and release the DOWN button to scroll downward through the main menu items.
UNDERSTANDING YOUR INSTRUMENT PANEL 335 Once the RIGHT button has been selected for 3. The reconfigurable telltales section below the odometer line. the desired submenu list, follow the EVIC prompts to properly select the desired sub- The main display area will normally display the main menu EVIC features menu or the screens of a selected feature of the main menu.
336 UNDERSTANDING YOUR INSTRUMENT PANEL • Unstored Messages The Reconfigurable Telltales section is divided into the white telltales area on the right, amber telltales in the This message type is displayed indefinitely or until the middle, and red telltales on the left. condition that activated the message is cleared. Examples of this message type are ⬙Turn Signal On⬙ (if a turn signal When the appropriate conditions exist, the EVIC displays is left on) and ⬙Lights On⬙ (if driver leaves the vehicle).
UNDERSTANDING YOUR INSTRUMENT PANEL 337 Wrong Key RKE Battery Low Damaged Key Service Keyless System Key not programmed Low Washer Fluid Vehicle Not in Park Oil Change Required Key Left Vehicle Check Gascap Key Not Detected Left Front Turn Signal Light Out Press Brake Pedal and Push Button to Start Left Rear Turn Signal Light Out Liftgate Ajar (chime will sound when vehicle starts Right Front Turn Signal Light Out moving) Right Rear Turn Signal Light Out Low Tire Pressure Park Assist Disabled
338 UNDERSTANDING YOUR INSTRUMENT PANEL Blind Spot System Off — This message is displayed when EVIC White Telltale Lights the ignition is turned to ON to indicate the Blind Spot This area will show reconfigurable white caution tellSystem has been turned off. tales.
UNDERSTANDING YOUR INSTRUMENT PANEL 339 • Electronic Speed Control SET • Loose Gascap Indicator If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a loose gascap indicator will display in the telltale display area. Tighten the fuel filler cap properly and press the SELECT button EVIC Amber Telltale Lights to turn off the message.
340 UNDERSTANDING YOUR INSTRUMENT PANEL EVIC Red Telltale Lights This area will show reconfigurable red telltales. These telltales include: • Charging System Light This light shows the status of the electrical charging system. The light should come on when the ignition switch is first turned ON and remain on briefly • Door Ajar as a bulb check.
UNDERSTANDING YOUR INSTRUMENT PANEL 341 • Electronic Throttle Control (ETC) Light • Engine Temperature Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. The light will come on when the ignition is first turned ON and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer. This light warns of an overheated engine condition.
342 UNDERSTANDING YOUR INSTRUMENT PANEL • Transmission Temperature Warning Light This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage, such as trailer towing. If this light turns on, safely pull over and stop the vehicle. Then, shift the transmission into NEUTRAL and run the engine at idle or faster until the light turns off.
UNDERSTANDING YOUR INSTRUMENT PANEL 343 Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position or cycle the ignition to the ON/RUN position if equipped with Keyless Enter-N-Go™. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance) refer to the following procedure. Vehicles Not Equipped With Keyless Enter-N-Go™ 1.
344 UNDERSTANDING YOUR INSTRUMENT PANEL • Distance To Empty (DTE) • Miles Per Gallon (MPG) Average Fuel Economy Shows the average fuel economy since the last reset. The Average Fuel Economy can be reset by following the prompt in the EVIC to use the SELECT button. When the fuel economy is reset, the display will read “zero” for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset.
UNDERSTANDING YOUR INSTRUMENT PANEL 345 NOTE: Significant changes in driving style or vehicle SELECT button. Press the SELECT button to display the loading will greatly affect the actual drivable distance of current speed in mph or km/h. Pressing the SELECT button a second time will toggle the unit of measure the vehicle, regardless of the DTE displayed value. between mph or km/h.
346 UNDERSTANDING YOUR INSTRUMENT PANEL Trip B Shows the total distance traveled for Trip B since the last reset. Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON or START position. To Reset A Trip Function button to view a graphic of the vehicle with a tire pressure value at each corner of the graphic.
UNDERSTANDING YOUR INSTRUMENT PANEL 347 • Coolant Temp Messages # Displays the actual coolant temperature. Select from Main Menu using the UP or DOWN buttons. This feature shows the number of stored warning messages (in the # place holder). Pressing the SELECT button will allow you to see what the stored messages are. Press and release the UP and DOWN buttons if there is more than one message to step through the remaining stored messages. Pressing the BACK button takes you back to the Main Menu.
348 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: A good calibration requires a level surface and an environment free from large metallic objects such as The compass readings indicate the direction the vehicle is buildings, bridges, underground cables, railroad tracks, facing. The EVIC will display one of eight compass etc. readings and the outside temperature.
UNDERSTANDING YOUR INSTRUMENT PANEL 349 4. Press and release the SELECT button to start the NOTE: Keep magnetic materials away from the top of calibration. The “CAL” indicator will be displayed in the instrument panel, such as iPod’s, Mobile Phones, Laptops and Radar Detectors. This is where the compass the EVIC. module is located, and it can cause interference with the 5. Complete one or more 360–degree turns (in an area compass sensor, and it may give false readings.
350 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Turn the ignition switch ON. Customer-Programmable Features (System Setup) 2. Press the UP or DOWN button until the Setup (Customer-Programmable Features) menu is reached, Personal Settings allows you to set and recall features when the transmission is in PARK. If the transmission is then press the SELECT button. out of PARK or the vehicle begins moving, a warning 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 351 through the language choices. Press the SELECT button to select English, Spanish (Español), French (Français). Then, as you continue, the information will display in the selected language. Auto Unlock Doors When this feature is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK or NEUTRAL position and the driver’s door is opened.
352 UNDERSTANDING YOUR INSTRUMENT PANEL To make your selection, press and release the RIGHT arrow button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. Remote Start Comfort Sys. When this feature is selected and the remote start is activated, the heated steering wheel and driver heated seat features will automatically turn on in cold weather.
UNDERSTANDING YOUR INSTRUMENT PANEL 353 Flash Lamps With Lock Headlamp Off Delay When selected, the front and rear turn signals will flash when the doors are locked with the RKE transmitter. To make your selection, press and release the RIGHT arrow button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated.
354 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Turning the headlights on during the daytime causes the instrument panel lights to dim. To increase the brightness, refer to “Lights” in “Understanding The Features Of Your Vehicle.” Illuminated Approach When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the RKE transmitter.
UNDERSTANDING YOUR INSTRUMENT PANEL 355 Flashers With Sliding Door Easy Exit Seat When this feature is selected the signal lamps activate when power or manual sliding doors are in operation, signaling other drivers that someone may be exiting or entering the vehicle. To make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated.
356 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® 730N/430/430N CD/DVD/HDD/NAV — IF EQUIPPED Uconnect® 130 Refer to your Uconnect® Supplement Manual for detailed operating instructions. Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” for further details. Operating Instructions (Uconnect® Phone) — If Equipped Refer to “Uconnect® Phone” for further details.
UNDERSTANDING YOUR INSTRUMENT PANEL 357 Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio. Push the ON/VOLUME control knob a second and radio frequency. time to turn off the radio. Clock Setting Procedure Electronic Volume Control 1. Press and hold the TIME button until the hours blink. The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning 2.
358 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL Pressing the RW (Rewind) or FF (Fast Forward) buttons control knob to the right or left to increase or decrease the causes the tuner to search for the next frequency in the treble tones. direction of the arrows. This feature operates in either AM or FM frequencies. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 359 SET/RND Button — To Set The Pushbutton Memory Every time a preset button is used, a corresponding button number will display. When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button. The symbol SET 1 will now show in the display window. Select the button (1 to 6) you wish to lock onto this station and press and release that button.
360 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC position seconds. Play will begin at the start of track 1. to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 361 EJECT Button — Ejecting A CD Press the EJECT button to eject the CD. the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button If you have ejected a disc and have not removed it within Press this button to change the display from a large CD 10 seconds, it will be reloaded. If the CD is not removed, playing time display to a small CD playing time display.
362 UNDERSTANDING YOUR INSTRUMENT PANEL SET/RND Button (Random Play Button) Supported Media (Disc Types) Press this button while the CD is playing to activate The MP3 file recording media supported by the radio are Random Play. This feature plays the selections on the CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. compact disc in random order to provide an interesting Supported Medium Formats (File Systems) change of pace.
UNDERSTANDING YOUR INSTRUMENT PANEL 363 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.) writing⬙ are most likely multisession discs.
364 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Playback Of MP3 Files Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 When a medium containing MP3 data is loaded, the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL 365 Operation Instructions — Auxiliary Mode Uconnect® 130 WITH SATELLITE RADIO The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or iPod®, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the DISC/AUX button will change the mode to auxiliary device if the AUX jack is connected.
366 UNDERSTANDING YOUR INSTRUMENT PANEL Power Switch/Volume Control (Rotary) another selection. Holding either button will bypass stations without stopping, until you release it. Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second Voice Command System (Radio) — If Equipped time to turn off the radio. Refer to “Voice Command” for further details.
UNDERSTANDING YOUR INSTRUMENT PANEL 367 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes Press this button to operate the Uconnect® Phone feature will begin to blink. (if equipped). Refer to “Uconnect® Phone” for further details. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL conIf your vehicle is not equipped with or this feature is not trol knob to save time change.
368 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL Press the INFO button for an RDS station (one with call control knob to the right or left to increase or decrease the letters displayed). The radio will return a Radio Text mid-range tones. message broadcast from an FM station (FM mode only). Push the rotary TUNE/SCROLL control knob a third RW/FF time and TREBLE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 369 MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
370 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 16-Digit Character Display Soft Soft Rck Soft R&B Sports Talk Top 40 Weather SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob. After adjusting the hours, press the TUNE/SCROLL control knob to set the minutes.
UNDERSTANDING YOUR INSTRUMENT PANEL 371 button. The symbol SET 1 will now show in the display window. Select the button (1–6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not be stored into pushbutton memory.
372 UNDERSTANDING YOUR INSTRUMENT PANEL Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display. If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded.
UNDERSTANDING YOUR INSTRUMENT PANEL 373 EJECT Button — Ejecting A CD Press the EJECT button to eject the CD. the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within playing time display to a small CD playing time display. 10 seconds, it will be reloaded.
374 UNDERSTANDING YOUR INSTRUMENT PANEL SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Press this button while the CD is playing to activate Random Play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
UNDERSTANDING YOUR INSTRUMENT PANEL 375 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙.⬙ and a threecharacter extension) • Level 2: 31 (including a separator ⬙.⬙ and a threecharacter extension) Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files). Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs.
376 UNDERSTANDING YOUR INSTRUMENT PANEL ID3 Tag information for artist, song title, and album title • Number of files and folders - Loading times will increase with more files and folders are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. To increase the speed of disc loading, it is recommended Playlist files are not supported. MP3 Pro files are not to use CD-R media and single-session discs. To create a single-session disc, enable the “Disc at Once” option supported.
UNDERSTANDING YOUR INSTRUMENT PANEL 377 INFO Button — CD Mode For MP3 Play Pressing the AUX button will change the mode to auxiliary device if the AUX jack is connected. Pressing the INFO button repeatedly will scroll through the following TAG information: Song Title, Artist, File NOTE: The AUX device must be turned on and the Name, and Folder Name (if available). device’s volume set to the proper level.
378 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Sirius service is not available in Hawaii and has 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). limited coverage in Alaska. System Activation 2. Your Vehicle Identification Number. Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL 379 Satellite Antenna To ensure optimum reception, do not place items on the roof around the rooftop antenna location. Metal objects placed within the line of sight of the antenna will cause decreased performance. Larger luggage items such as bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly on or above the antenna.
380 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button TUNE Control (Rotary) Pressing the SCAN button causes the tuner to search for Turn the rotary TUNE/SCROLL control knob clockwise the next channel, pausing for eight seconds before con- to increase or counterclockwise to decrease the channel. tinuing to the next. To stop the search, press the SCAN MUSIC TYPE Button button a second time. Pressing this button once will turn on the Music Type INFO Button mode for five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 381 SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number. This number is used to activate, deactivate, or change the Sirius subscription. SET Button — To Set The Pushbutton Memory You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window.
382 UNDERSTANDING YOUR INSTRUMENT PANEL SETTING THE ANALOG CLOCK iPod®/USB/MP3 CONTROL — IF EQUIPPED To set the analog clock at the top center of the instrument NOTE: This section is for Uconnect® 130/230 radios panel, press and hold the button until the setting is only. For Uconnect® 430/430N, 730N, 731N, 735N or 431 correct. touchscreen radio iPod®/USB/MP3 control feature, refer to the separate Supplement Manual. iPod®/USB/MP3 control is available only if equipped as an option with these radios.
UNDERSTANDING YOUR INSTRUMENT PANEL 383 NOTE: • If the radio has a USB port, refer to the appropriate Uconnect® Multimedia radio User’s Manual for iPod® or external USB device support capability. • Connecting an iPod® or consumer electronic audio device to the AUX port located in the radio faceplate, plays media, but does not use the iPod® / MP3 control feature to control the connected device.
384 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The glove compartment will have a position where the iPod® or consumer electronic audio device cable can be routed through without damaging the cable when closing the lid. This allows routing of the cable without damaging it while closing the lid. If a cut out is not available in the glove compartment, route the cable away from the lid latch and in a place that will allow the lid to close without damaging the cable.
UNDERSTANDING YOUR INSTRUMENT PANEL 385 • Turning it clockwise (forward) by one click, while Controlling The iPod® Or External USB Device playing a track, skips to the next track or press the VR Using Radio Buttons button and say ⬙Next Track.
386 UNDERSTANDING YOUR INSTRUMENT PANEL • Use the << SEEK and SEEK >> buttons to jump to the • Press the SCAN button to use iPod®/USB/MP3 deprevious or next track. Pressing the SEEK >> button vice scan mode, which will play the first ten seconds of each track in the current list and then forward to the during play mode will jump to the next track in the next song.
UNDERSTANDING YOUR INSTRUMENT PANEL 387 • During all List modes, the iPod® displays all lists in “wrap-around” mode. So if the track is at the bottom of During Play mode, pressing any of the buttons described the list, just turn the wheel backward (counterclockbelow, will bring up List mode. List mode enables wise) to get to the track faster. scrolling through the list of menus and tracks on the audio device.
388 UNDERSTANDING YOUR INSTRUMENT PANEL • Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • To exit List mode without selecting a track, press the same PRESET button again to go back to Play mode. • LIST button: The LIST button will display the top level menu of the iPod® or external USB device. • Turn the TUNE control knob to list the top-menu item to be selected and press the TUNE control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL 389 Bluetooth® Streaming Audio (BTSA) Selecting A Different Audio Device Music can be streamed from your cellular phone to the 1. Press the PHONE button to begin. Uconnect® phone system. 2. After the ⬙Ready⬙ prompt and following the beep, say Controlling BTSA Using Radio Buttons ⬙Setup⬙, then say ⬙Select Audio Devices.⬙ To enter BTSA mode, press either “AUX” button on the 3.
390 UNDERSTANDING YOUR INSTRUMENT PANEL Browse Getting Started Browsing is not available on a Bluetooth® Streaming • Screen(s) located in the overhead console: Unfold the Audio (BTSA) device. Only the current song that is overhead LCD screen(s) by pushing the button on the playing will display info. overhead console behind the screen(s).
UNDERSTANDING YOUR INSTRUMENT PANEL 391 • Your vehicle may be equipped with either a standard • The system can be controlled by the front seat occuDVD player or a Blu-ray™ Disc Player. If equipped pants using either the touchscreen radio, the DVD or Blu-ray™ Disc Player, or by the rear seat occupants with a Blu-ray™ Disc Player, the icon will be present using the remote control. on the Player.
392 UNDERSTANDING YOUR INSTRUMENT PANEL • Touch the 1 soft-key to select an audio channel, then • Not all Blu-ray™, CD or DVD discs will automatically touch the VES™ Disc soft-key in the media column. restart from where you left off at when turned off.
UNDERSTANDING YOUR INSTRUMENT PANEL 393 When connecting an external source to the AUX input, be sure to follow the standard color coding for the VES™ jacks: NOTE: Certain high-end video games, such as Playstation3 and XBox360 will exceed the power limit of the vehicle’s Power Inverter. Refer to the Power Inverter section in your vehicle’s Owner’s Manual for more information.
394 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Remote Control Using The Touchscreen Radio Controls 1. Press the MODE button on the Remote Control. 1. Press the MENU hard-key on the radio faceplate. 2. While looking at the video screen, highlight VES™ 2. Touch the Rear VES™ soft-key to display the Rear VES™ Controls. If a channel list is displayed, press the HIDE AUX 1, by either pressing Up/Down/Left/Right butLIST soft-key to display the Rear VES™ Controls screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 395 3. Touch the 1 soft-key and then touch either AUX 1 or AUX 2 in the VES™ column (depending which AUX input is used). To exit press the back arrow soft-key at the top of the screen. Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1 Ensure the Remote Control and Headphone switch is on Channel 2. Using The Remote Control 1.
396 UNDERSTANDING YOUR INSTRUMENT PANEL 2. While looking at the video screen, either press Up/ Using The Touchscreen Radio Controls Down/Left/Right on the Remote Control to highlight 1. Press the MENU hard-key on the radio faceplate. the desired audio source or repeatedly press the SOURCE button on the remote until the desired audio 2. Touch the Rear VES™ soft-key to display the Rear VES™ Controls. If a channel list is displayed, press the HIDE source appears on the screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 397 3. To listen to an audio source on Channel 2 while a Dual Video Screen video is playing on Channel 1, touch the 2 soft-key and NOTE: Typically there are two different ways to operate choose an audio source. To exit touch the back arrow the features of the Video Entertainment System (VES™). soft-key at the top left of the left screen.
398 UNDERSTANDING YOUR INSTRUMENT PANEL 3. To watch a DVD on Screen 1 for second row passengers, ensure the Remote Control and Headphone switch is on Channel 1. 4. To watch a DVD on Screen 2 for third row passengers, ensure the Remote Control and Headphone switch is on Channel 2. Using The Remote Control 1. Press the SOURCE button on the Remote Control. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 399 Using The Touchscreen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 3. Touch the 1 or 2 soft-key and then the DISC soft-key in the MEDIA column. To exit touch the back arrow at the top left of the screen. 2. Touch the Rear VES™ soft-key to display the Rear VES™ NOTE: Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES™ Controls screen.
400 UNDERSTANDING YOUR INSTRUMENT PANEL Play A DVD Using The VES™ Player — If Equipped Using The Remote Control 1. Press the SOURCE button on the Remote Control. 1. Insert the DVD with the label facing up. The VES™ 2. While looking at Screen 1 or 2, highlight VES™ DISC player automatically selects the appropriate mode by either pressing Up/Down/Left/Right buttons or after the disc is recognized and starts playing the by repeatedly pressing the SOURCE button, then press DVD.
UNDERSTANDING YOUR INSTRUMENT PANEL 401 NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen. • Channel/Screen 2 select mode information is shown on the right side of the screen. • The VES™ will retain the last setting when turned off. 4 Using The Touchscreen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES™ soft-key to display the Rear VES™ Controls.
402 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Touch the 1 or 2 soft-key and then the DISC soft-key in NOTE: the VES™ column. To exit touch the back arrow • To view a DVD on the radio press the RADIO/MEDIA soft-key at the top left of the screen. hard-key, on the radio faceplate, then touch the DISC tab soft-key and then the VIEW VIDEO soft-key. • Viewing a DVD on the Touchscreen radio screen is not available in all states/provinces.
UNDERSTANDING YOUR INSTRUMENT PANEL 403 NOTE: The Blu-ray™ Player has basic control functions NOTE: such as Menu, Play, Pause, FF, RW and Stop. • Channel/Screen 1 select mode information is shown on the left side of the screen. 2. To watch a Blu-ray™ Disc on Screen 1 for second row passengers, ensure the Remote Control and Head• Channel/Screen 2 select mode information is shown phone switch is on Channel 1. on the right side of the screen. 3.
404 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Listen To An Audio Source While A Video Is Playing • To view a Blu-ray™ Disc on the radio press the RADIO/MEDIA hard-key, on the radio faceplate, then Ensure the Remote Control and Headphone switch are on touch the VES™ Disc tab soft-key and then the VIEW the same channel. If watching a video on Screen 1 (second row), then Channel 2 could be used for audio. If VIDEO soft-key.
UNDERSTANDING YOUR INSTRUMENT PANEL 405 Using The Touchscreen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES™ soft-key to display the Rear VES™ Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES™ Controls screen.
406 UNDERSTANDING YOUR INSTRUMENT PANEL 3. To listen to an audio source on Channel 2 while a Important Notes For Dual Video Screen System video is playing on Channel 1, touch the 2 soft-key and • VES™ is able to transmit two channels of stereo audio choose an audio source. To exit touch the back arrow and video simultaneously. soft-key at the top left of the left screen. • The Blu-ray™ Disc Player can play CDs, DVDs and Blu-ray™ Discs. • The DVD Player can play CDs and DVDs.
UNDERSTANDING YOUR INSTRUMENT PANEL 407 • Selecting a video source on Channel 2, the video VES™ Remote Control — If Equipped source will display on the third row screen or Screen 2 Controls And Indicators and can be heard on Channel 2. • The 2nd row screen and 3rd row screen of the Video Entertainment System can play two separate discs by utilizing the touchscreen radio DVD player and Bluray™ Disc Player. 4 • Audio can be heard through the headphones even when the screen(s) are closed.
408 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Channel Selector Indicators – When a button is 6. 䉲 / Prev – In radio modes, press to select to the pressed, the currently affected channel or channel previous station. In disc modes, press to advance to the button is illuminated momentarily. start of the current or previous audio track or video chapter. In menu modes, use to navigate in the menu. 3. Light – Turns the remote control backlighting on or off. The remote backlighting turns off automatically after 7.
UNDERSTANDING YOUR INSTRUMENT PANEL 409 listening to a disc in a radio with a multiple-disc changer, PROG Up selects the next disc and PROG Down selects the previous disc. is selected and the disc is stopped, press the SETUP button to access the DVD Setup menu. (see the DVD Setup Menu of this manual.) 11. MUTE – Press to mute the headphone audio output 16. BACK – When navigating in menu mode, press to for the selected channel. return to the previous screen.
410 UNDERSTANDING YOUR INSTRUMENT PANEL Blu-ray™ Player Remote Control — If Equipped audio while the screen is closed, press the Power button to turn the headphone transmitter on. 2. Channel Selector Indicators – When a button is pressed, the currently affected channel or channel button is illuminated momentarily. 3. SOURCE – Press to enter Source Selection screen. Blu-ray™ Player Remote Control Controls And Indicators 1.
UNDERSTANDING YOUR INSTRUMENT PANEL 411 6. SETUP – Press to access the Blu-ray™ Setup menu 11. KEYPAD – Press to navigate chapters or titles. screen. When a disc is loaded in the Blu-ray™ player 12. ▪ (Stop) – Stops disc play. (if equipped) and the VES™ mode is selected and the disc is stopped, press the SETUP button to access the 13. 䉳䉳 – Press and release to jump to the previous Blu-ray™ Setup menu. audio track or video chapter. Press and hold to fast rewind through the current audio track or video 7.
412 UNDERSTANDING YOUR INSTRUMENT PANEL Remote Control Storage The video screen(s) come with a built in storage compartment for the remote control which is accessible when the screen is opened. To remove the remote, use your index finger to pull and rotate the remote towards you. Do not try to pull the remote straight down as it will be very difficult to remove.
UNDERSTANDING YOUR INSTRUMENT PANEL 413 Locking The Remote Control All remote control functionality can be disabled as a parental control feature. • To disable the Remote Control from making any changes, press the Video Lock button on the DVD player (if equipped). If the vehicle is not equipped with a DVD player, follow the radio’s instructions to turn Video Lock on. The radio and the video screen(s) indicate when Video Lock is active.
414 UNDERSTANDING YOUR INSTRUMENT PANEL Blu-ray™ Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. Front seat occupants receive some headphone audio coverage to allow them to adjust the headphone volume for the young rear seat occupants that may not be able to do so for themselves.
UNDERSTANDING YOUR INSTRUMENT PANEL 415 Controls The headphone power indicator and controls are located on the right ear cup. NOTE: The rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video system is turned off. Changing The Audio Mode For Headphones Blu-ray™ VES™ Headphones 1 — Power Button 2 — Volume Control 3 — Channel Selection Switch 1.
416 UNDERSTANDING YOUR INSTRUMENT PANEL 5. To cancel out of the Mode Selection menu, press the BACK button on the remote control. • When both switches are on Channel 1, the Remote is controlling Channel 1 and the headphones are tuned Replacing The Headphone Batteries to the audio of the VES™ Channel 1. Each set of headphones requires two AAA batteries for • When both switches are on Channel 2, the Remote is operation.
UNDERSTANDING YOUR INSTRUMENT PANEL 417 How Long Does The Coverage Last? This warranty lasts as long as you own the Product. What Does This Warranty Cover? Except as specified below, this warranty covers any Product that in normal use is defective in workmanship or materials. What Does This Warranty Not Cover? This warranty does not cover any damage or defect that results from misuse, abuse or modification of the Product other than by Unwired.
418 UNDERSTANDING YOUR INSTRUMENT PANEL System Information Shared Modes This allows the VES™ to output radio sources to the headphones and the radio to output VES™ sources to the vehicle speakers. When the radio and VES™ channel 1 or 2 are in the same (shared) mode, a VES™ icon will be visible on the radio’s display for that channel, and the shared icon will be visible on the VES™ screen. When in shared mode, the same audio source is heard in the shared headphone channel 1 or channel 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 419 Information Mode Display 5. Channel 2 Shared Status 6. Channel 2 Audio Only/Mute 7. Channel 1 ENTER/OK Button Action 8. Channel 2 ENTER/OK Button Action 9. Clock 10. Video Lock 11. Not Available / Error Information Mode Video Screen Display 1. Channel 1 Mode 2. Channel 1 Shared Status 3. Channel 1 Audio Only/Mute 4.
420 UNDERSTANDING YOUR INSTRUMENT PANEL Numeric Keypad Menu 1. Press the remote control’s navigation buttons (䉱, 䉲, 䉴, 䉳) to navigate to the desired digit. 2. When the digit is highlighted, press the remote control’s ENTER/OK button to select the digit. Repeat these steps until all digits are entered. 3. To delete the last digit, navigate to the Del button and press the remote control’s ENTER/OK button. 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 421 Disc Menu Display Settings When watching a video source (DVD Video with the disc in Play mode, Aux Video, etc.), pressing the remote control’s SETUP button activates the Display Settings menu. These settings control the appearance of the video on the screen. The factory default settings are already set for optimum viewing, so there is no need to change these settings under normal circumstances.
422 UNDERSTANDING YOUR INSTRUMENT PANEL Listening To Audio With The Screen Closed Disc Formats To listen to only audio portion of the channel with the The DVD player is capable of playing the following types screen closed: of discs (12 cm or 8 cm diameter): • Set the audio to the desired source and channel. • Close the video screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 423 • Other compression formats such as Xvid and RMP4 will not play. The Blu-Ray™ Player will automatically • DVD/CD: MP3, WMA, AAC, DivX (versions 3 – 6) skip the file and begin playing the next available file. profile 3.0 • For the lack of indexes DivX files, “Resume Play,” “Fast Compressed Video Files (DivX) Forward” and “Fast Rewind” cannot be supported.
424 UNDERSTANDING YOUR INSTRUMENT PANEL DVD/Blu-ray™/BD Region Codes Recorded Discs The DVD player/Blu-ray™ Player and many DVD/Bluray™ Discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the DVD/Blu-ray™ Disc does not match the region code for the player, the disc will stop playing and a warning will be displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 425 • For CD Data (or CD-ROM) discs, always use the ISO-9660 (Level 1 or Level 2), Joliet, or Romeo format. Other formats (such as HFS, or others) are not supported. The recommended method for labeling recordable discs (CD-R, CD-RW, and DVD-R) is with a permanent marker. Do not use adhesive labels as they may separate from the disc, become stuck, and cause permanent damage to the DVD player.
426 UNDERSTANDING YOUR INSTRUMENT PANEL • For MP3 files, only version 1 ID3 tag data (such as artist name, track title, album, etc.) are supported. supported. For both formats, the recommended sample rate is either 44.1 kHz or 48 kHz. • For Blu-ray™ files, only version 1.0 / 1.1 / 2.2 / 2.3 • To change the current file, use the DVD player’s 䉱 button to advance to the next file, or the 䉲 button to and 2.4 ID3 tag data (such as artist name, track title, album, etc.) are supported.
UNDERSTANDING YOUR INSTRUMENT PANEL 427 skipping forward 1.0 to 3.0 seconds at a time. If the end Display of the disc is reached, the DVD player will return to the Other Language Setup beginning of the disc and attempt to play the start of the first track. The DVD player may shut down during extremely hot conditions, such as when the vehicle’s interior temperature is above 120° F (49° C). The Blu-ray™ Player may shut down when the vehicle’s interior temperature exceeds 140° F (60° C).
428 UNDERSTANDING YOUR INSTRUMENT PANEL All of the Language settings have a special ⬙Other⬙ setting to accommodate languages other than Japanese or English. These languages are selected using a special four-digit code. selecting the digit, press the remote control’s Right cursor button to select the next digit. Repeat this digit selection sequence for all four digits. To enter a new language code, activate the DVD Setup • When the entire four-digit code is entered, press the Menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 429 Rating And Password Setup The Rating and Password settings work together to control the types of DVDs that your family watches. Most DVDVideo discs have a rating (from 1 to 8) assigned to them where lower numbers are designated for all audiences and higher numbers are designated for more adult audiences. The default rating is Level 8 (play all discs without a password) and the default password is 0000.
430 UNDERSTANDING YOUR INSTRUMENT PANEL To set the password, activate the DVD Setup Menu and • After the four-digit password is entered, press the remote follow these additional instructions: control’s ENTER/OK button to accept the change. • Using the remote control Left and Right cursor buttons, select the Rating tab. • Highlight ⬙Change Password⬙, and then press the remote control’s ENTER/OK button. • Enter the current password.
UNDERSTANDING YOUR INSTRUMENT PANEL 431 To set the rating, activate the DVD Setup Menu and Product Agreement follow these additional instructions: Software • Using the remote control’s Left and Right cursor This product contains software licensed under GNU buttons, select the Rating tab. General Public License (GPL) or GNU Lesser General • Highlight ⬙Change Rating⬙, and then press the remote Public License (LGPL), etc.
432 UNDERSTANDING YOUR INSTRUMENT PANEL • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (⬙AVC VIDEO⬙) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
UNDERSTANDING YOUR INSTRUMENT PANEL 433 Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA. viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. • Manufactured under license under U.S.
434 UNDERSTANDING YOUR INSTRUMENT PANEL ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certi- Trademark fied® device must be registered in order to play pur• Blu-ray Disc™, Blu-ray™ and the logos are trademarks chased DivX Video-on-Demand (VOD) movies. To obtain of the Blu-ray Disc Association. your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more • Java is a registered trademark of Oracle and/or its information on how to complete your registration. affiliates.
UNDERSTANDING YOUR INSTRUMENT PANEL 435 STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The right-hand rocker switch has a pushbutton in the center, and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume. Pressing the bottom of the rocker switch will decrease the volume. Pressing the center button changes the operation of the radio from AM to FM, or to CD mode, depending on which radio is in the vehicle.
436 UNDERSTANDING YOUR INSTRUMENT PANEL Radio Operation CD/DVD/Blu-ray™ Disc MAINTENANCE Pressing the top of the switch will SEEK up for the next To keep a CD/DVD/Blu-ray™ Disc in good condition, listenable station, and pressing the bottom of the switch take the following precautions: will SEEK down for the next listenable station. 1. Handle the disc by its edge; avoid touching the The button located in the center of the left-hand switch surface. will tune to the next preset station that you have pro2.
UNDERSTANDING YOUR INSTRUMENT PANEL 437 NOTE: If you experience difficulty in playing a particular disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. CLIMATE CONTROLS The Climate Control system allows you to regulate the temperature, amount, and direction of air circulating throughout the vehicle.
438 UNDERSTANDING YOUR INSTRUMENT PANEL The primary control for the rear blower is on the front climate control unit located on the instrument panel. When the front control is in any position other than rear, the front control operates all the rear functions. The rear airflow modes will mirror the front unit operation. Rear Panel mode is automatically selected when the front control is in the Panel mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 439 2. Rear Blower Control — If Equipped 5. Right Front Temperature Control Use this control to regulate the amount of air forced through the rear system in any mode you select. The rear blower speed increases as you move the control to the right from the “O” (Off) position. There are seven blower speeds. To allow the rear overhead control, turn blower knob fully to the left, past The ⬙O⬙ off position into the “REAR” control position.
440 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The air conditioning compressor may operate in NOTE: Mix and Defrost, even if the A/C button is not pressed. • You can turn off the heated mirror feature at anytime This dehumidifies the air to help dry the windshield. To by pressing the rear window defroster switch a improve fuel economy, use these modes only when second time. necessary. • To prevent excessive battery drain, use the rear win8.
UNDERSTANDING YOUR INSTRUMENT PANEL 441 CAUTION! (Continued) • Do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window. • Keep all objects a safe distance from the window. 9. Recirculation Control Button Press this button to choose between outside air intake or recirculation of the air inside the vehicle. An indicator light will illuminate when you are in Recirculation mode.
442 UNDERSTANDING YOUR INSTRUMENT PANEL 10. Air Conditioning (A/C) Button Press and release to change the current setting. The indicator illuminates when ON. 12. Bi-Level Mode Button Air is directed through the panel and floor outlets. NOTE: There is a difference in temperature (in any conditions other than full cold or full hot), between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets. This feature gives improved comfort during sunny but cool conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL 443 The rear blower and temperature controls for the rear seat passengers are located in the headliner, near the If ECONOMY mode is desired, press the A/C button to center of the vehicle. turn off the indicator light and the A/C compressor. Rotate the temperature control knob to the desired temperature. Also, make sure to select only Panel, Bi-Level or Floor modes. Economy Mode Max A/C 4 For maximum cooling use the A/C and Recirculation mode buttons at the same time.
444 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Blower Control Rear Temperature Control The rear blower control knob can be manually set to off, or any fixed blower speed, by rotating the knob from low to high. This allows the rear seat occupants to control the volume of air circulated in the rear of the vehicle. To change the temperature in the rear of the vehicle, rotate the temperature knob counterclockwise to lower the temperature, and clockwise to increase the temperature.
UNDERSTANDING YOUR INSTRUMENT PANEL 445 • When occupants in the vehicle select the AUTO mode operation, a comfort temperature can be set by using Air comes from both the headliner outlets and the the temperature up and down buttons, and the auto floor outlets. blower operation will be set automatically. NOTE: In many temperature positions, the Bi-Level • The system can be controlled manually, if desired.
446 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Left Front Seat Occupant Temperature Display This display shows the temperature setting for the left front seat occupant. 3. Mode Display This display shows the current Mode selection (Panel, Bi-Level, Floor, Mix). 4. Blower Control Display This display shows the current Blower speed selection. 5. Front Auto Indicator Front ATC Panel 1. Air Conditioning (A/C) Button This indicates when the system is in Front Auto mode. 6.
UNDERSTANDING YOUR INSTRUMENT PANEL 447 7. Right Front Seat Occupant Temperature Display rear climate control screen and allow the front seat occupants control over the rear climate settings. This display shows the temperature setting for the right 11. Rear Lock front seat occupant. 8. Front Defrost Button Press and release to change the current setting, the indicator illuminates when ON. Performing this function will cause the ATC to switch into manual mode.
448 UNDERSTANDING YOUR INSTRUMENT PANEL 14. Blower Control 18. Driver Temperature Control Up/Down Button There are seven blower speeds, the blower speed in- Provides the driver with independent temperature concreases as you move the control to the right from the trol. Push the top button for warmer temperatures or the lowest blower setting. Performing this function will lower button for cooler temperature settings. cause the ATC to switch into manual mode. Automatic Operation 15. Mode Control Button 1.
UNDERSTANDING YOUR INSTRUMENT PANEL 449 3. When the system is set up for your comfort level, it is on low until the engine warms up. The fan will engage not necessary to change the settings. You will experi- immediately if the Defrost mode is selected, or by changence the greatest efficiency by simply allowing the ing the front blower knob setting. system to function automatically.
450 UNDERSTANDING YOUR INSTRUMENT PANEL outlets. If Economy mode is desired, press the A/C To change the rear system settings: button to turn off the A/C mode in the ATC display and • Press ⬙REAR⬙ button to change control to rear control deactivate the A/C system. mode, Rear display (below) will appear. Control functions now operate rear system.
UNDERSTANDING YOUR INSTRUMENT PANEL 451 1. Mode Display This display shows the current Mode selection. 2. Rear Temperature Display Bi-Level Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, the Bi-Level This display shows the temperature setting for the rear mode is designed to provide cooler air out of the headseat occupants. liner outlets and warmer air from the floor outlets. 3.
452 UNDERSTANDING YOUR INSTRUMENT PANEL The rear system temperature control is on the front ATC panel located on the instrument panel. Pressing the Rear Temperature Lock button on the front ATC panel, illuminates a lock symbol in the rear display. The rear temperature and air source are controlled from the front ATC panel. Rear second row occupants can only adjust the rear ATC control when the Rear Temperature Lock button is turned off.
UNDERSTANDING YOUR INSTRUMENT PANEL 453 2. Rotate the Rear Blower, Rear Temperature and the Rear Mode Control knobs to suit your comfort needs. customer-programmable feature. Refer to the “Electronic Vehicle Information Center (EVIC) — CustomerProgrammable Features” in this Section. 3. ATC is selected by adjusting the rear blower knob Rear Blower Control counterclockwise to AUTO. Once the desired temperature is displayed, the ATC System will automatically achieve and maintain that comfort level.
454 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Temperature Control Headliner Mode To change the temperature in the rear of the vehicle, Air comes from the outlets in the headliner. Each rotate the temperature knob counterclockwise to lower of these outlets can be individually adjusted to the temperature, and clockwise to increase the tempera- direct the flow of air. Moving the air vanes of the outlets ture. The rear temperature settings are displayed in the to one side will shut off the airflow.
UNDERSTANDING YOUR INSTRUMENT PANEL 455 Recirculation Control Summer Operation When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, you may wish to recirculate interior air by pressing the Recirculation control button. Recirculation mode should only be used temporarily. The recirculation LED will illuminate when this button is selected. Push the button a second time to turn off the Recirculation mode LED and allow outside air into the vehicle.
456 UNDERSTANDING YOUR INSTRUMENT PANEL Vacation/Storage Outside Air Intake Before you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes, in fresh air with the blower setting on high. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again.
STARTING AND OPERATING CONTENTS 䡵 STARTING PROCEDURES . . . . . . . . . . . . . . . .461 ▫ Key Ignition Park Interlock. . . . . . . . . . . . . . .470 ▫ Automatic Transmission . . . . . . . . . . . . . . . .461 ▫ Brake/Transmission Shift Interlock System . . .470 ▫ Keyless Enter-N-Go™ — If Equipped . . . . . . .462 ▫ Fuel Economy (ECON) Mode . . . . . . . . . . . . .470 ▫ Normal Starting. . . . . . . . . . . . . . . . . . . . . . .463 ▫ Six-Speed Automatic Transmission . . . . . . . . .
458 STARTING AND OPERATING 䡵 POWER STEERING . . . . . . . . . . . . . . . . . . . . .484 ▫ Tire Identification Number (TIN). . . . . . . . . . .504 ▫ Power Steering Fluid Check . . . . . . . . . . . . . .484 ▫ Tire Terminology And Definitions . . . . . . . . . .505 䡵 PARKING BRAKE . . . . . . . . . . . . . . . . . . . . . .485 ▫ Tire Loading And Tire Pressure . . . . . . . . . . .506 䡵 ANTI-LOCK BRAKE SYSTEM (ABS) . . . . . . . . .488 䡵 TIRES — GENERAL INFORMATION . . . . . . . .
STARTING AND OPERATING 459 ▫ Life Of Tire . . . . . . . . . . . . . . . . . . . . . . . . .519 ▫ Materials Added To Fuel . . . . . . . . . . . . . . . .536 ▫ Replacement Tires . . . . . . . . . . . . . . . . . . . . .520 ▫ Fuel System Cautions. . . . . . . . . . . . . . . . . . .536 䡵 TIRE CHAINS (TRACTION DEVICES) . . . . . . .522 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . .537 䡵 TIRE ROTATION RECOMMENDATIONS . . . . .523 䡵 FLEXIBLE FUEL — IF EQUIPPED . . . . . . . . . . .
460 STARTING AND OPERATING 䡵 ADDING FUEL . . . . . . . . . . . . . . . . . . . . . . . .542 ▫ Common Towing Definitions . . . . . . . . . . . . .547 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . .542 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . .557 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . .543 䡵 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) . . . . . . . . . . . . . . . . . . .559 䡵 VEHICLE LOADING . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 461 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
462 STARTING AND OPERATING CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal.
STARTING AND OPERATING 463 Installing And Removing The ENGINE START/STOP Button Installing The Button 1. Remove the key fob from the ignition switch. NOTE: The ENGINE START/STOP button should only be removed or inserted with the ignition in the OFF position (OFF position for Keyless Enter-N-Go™). Normal Starting 2. Insert the ENGINE START/STOP button into the Using The ENGINE START/STOP Button ignition switch with the lettering facing up and read- 1. The transmission must be in PARK or NEUTRAL. able. 2.
464 STARTING AND OPERATING NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position and the transmission is in PARK, the system will automatically time out after 30 1. Place the shift lever/gear selector in PARK, then press minutes of inactivity and the ignition will switch to the and release the ENGINE START/STOP button. OFF position. 2. The ignition switch will return to the OFF position. Keyless Enter-N-Go™ Functions — With Driver’s 3.
STARTING AND OPERATING 465 3. Press the ENGINE START/STOP button a second time If Engine Fails To Start to change the ignition switch to the RUN position (EVIC displays “IGNITION MODE RUN”), WARNING! 4. Press the ENGINE START/STOP button a third time to return the ignition switch to the OFF position (EVIC displays “IGNITION MODE OFF”).
466 STARTING AND OPERATING WARNING! (Continued) • If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done improperly. Refer to “Jump Starting” in “What To Do In Emergencies” for further information. Clearing A Flooded Engine (Using ENGINE START/STOP Button) 3. Press and release the ENGINE START/STOP button once.
STARTING AND OPERATING 467 The starter motor will disengage automatically in 10 seconds. Once this occurs, release the accelerator pedal, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure. CAUTION! To prevent damage to the starter, wait 10 to 15 seconds before trying again. ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather.
468 STARTING AND OPERATING AUTOMATIC TRANSMISSION NOTE: You must press and hold the brake pedal while shifting out of PARK. CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed.
STARTING AND OPERATING 469 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, turn the engine OFF, and remove the Key Fob.
470 STARTING AND OPERATING Key Ignition Park Interlock Brake/Transmission Shift Interlock System This vehicle is equipped with a Key Ignition Park Interlock which requires the transmission to be in PARK before the ignition switch can be turned to the LOCK position. The key fob can only be removed from the ignition when the ignition is in the LOCK position, and the transmission is locked in PARK whenever the ignition switch is in the LOCK position.
STARTING AND OPERATING 471 • The torque converter clutch may engage at lower engine speeds and remain on longer. • The engine idle speed will be lower. • The overall driving performance will be more conservative. • Some ECON mode functions may be temporarily inhibited based on temperature and other factors. Six-Speed Automatic Transmission The transmission gear position display (located in the instrument cluster) indicates the transmission gear range.
472 STARTING AND OPERATING The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers). Only shift from DRIVE to PARK or REVERSE when the accelerator pedal is released and the vehicle is stopped.
STARTING AND OPERATING 473 PARK (P) This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a level surface, you may shift the transmission into PARK first, and then apply the parking brake.
474 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal.
STARTING AND OPERATING 475 WARNING! (Continued) • Allowing children to be alone in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. • Do not leave the Key Fob in or near the vehicle (or in a location accessible to children), and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode.
476 STARTING AND OPERATING REVERSE (R) This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL (N) CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause severe transmission damage. Refer to “Recreational Towing” in “Starting And Operating” and “Towing A Disabled Vehicle” in “What To Do In Emergencies” for further information.
STARTING AND OPERATING 477 while towing heavy trailers), use the Electronic Range Select (ERS) shift control (described below) to select a lower gear range. Under these conditions, using a lower gear range will improve performance and extend transmission life by reducing excessive shifting and heat buildup. During cold temperatures, transmission operation may be modified depending on engine and transmission temperature as well as vehicle speed.
478 STARTING AND OPERATING 4. Wait approximately 10 seconds. Electronic Range Select (ERS) Operation 5. Restart the engine. The Electronic Range Select (ERS) shift control allows the driver to limit the highest available gear when the shift lever is in the DRIVE position. For example, if you shift the transmission into 3 (third gear), the transmission will not shift above third gear (except to prevent engine overspeed), but will shift down into second and first gears normally. 6.
STARTING AND OPERATING 479 To exit ERS mode, simply press and hold the shift lever to the right (+) until “D” is once again displayed in the instrument cluster. Transmission Gear Position Display Actual Gear(s) Allowed WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury.
480 STARTING AND OPERATING Overdrive Operation The automatic transmission includes an electronically controlled Overdrive (sixth gear). The transmission will automatically shift into Overdrive if the following conditions are present: • • • • • Torque Converter Clutch A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds.
STARTING AND OPERATING 481 DRIVING ON SLIPPERY SURFACES Traction Acceleration When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is hydroplaning and may cause partial or complete loss of vehicle control and stopping ability.
482 STARTING AND OPERATING DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Cautions safety and prevent damage to your vehicle. and Warnings before doing so. Flowing/Rising Water WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off).
STARTING AND OPERATING 483 CAUTION! CAUTION! (Continued) • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water. • Do not exceed 5 mph (8 km/h) when driving through standing water. This will minimize wave effects.
484 STARTING AND OPERATING POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers.
STARTING AND OPERATING 485 CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the New Vehicle Limited Warranty. WARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturer’s recommended power steering fluid.
486 STARTING AND OPERATING NOTE: • When the parking brake is applied and the automatic transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied. It does not show the degree of brake application.
STARTING AND OPERATING 487 WARNING! WARNING! (Continued) • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.
488 STARTING AND OPERATING ANTI-LOCK BRAKE SYSTEM (ABS) • Brake pedal pulsations. The Anti-Lock Brake System (ABS) provides increased • A slight drop or fall away of the brake pedal at the end vehicle stability and brake performance under most of the stop. braking conditions. The system operates with a separate computer to modulate hydraulic pressure to prevent WARNING! wheel lock-up and help avoid skidding on slippery • The Anti-Lock Brake System contains sophistisurfaces.
STARTING AND OPERATING 489 WARNING! (Continued) • The Anti-Lock Brake System cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the user’s safety or the safety of others.
490 STARTING AND OPERATING Warning Light” does not come on when the ignition Traction Control System (TCS) switch is turned to the ON position, have the bulb The Traction Control System (TCS) monitors the amount repaired as soon as possible. of wheel spin of each of the driven wheels.
STARTING AND OPERATING 491 your speed and driving to the prevailing road conditions, Brake Assist System (BAS) and do not switch off the ESC or TCS. The Brake Assist System (BAS) is designed to optimize the vehicle’s braking capability during emergency brakWARNING! ing maneuvers.
492 STARTING AND OPERATING WARNING! • The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • The BAS cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. • The capabilities of a BAS-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others.
STARTING AND OPERATING 493 WARNING! The Electronic Stability Control System (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent all accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. ESC also cannot prevent accidents resulting from loss of vehicle control due to inappropriate driver input for the conditions.
494 STARTING AND OPERATING When in the “Partial Off” mode, the TCS portion of ESC, WARNING! (Continued) except for the “limited slip” feature described in the TCS When in ⴖPartial Offⴖ mode, the engine power section, has been disabled and the “ESC OFF Indicator reduction feature of TCS is disabled, and the Light” will be illuminated. When in the “Partial Off” enhanced vehicle stability offered by the ESC sysmode, ESC will operate without engine torque managetem is reduced. ment.
STARTING AND OPERATING 495 ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should turn off with the engine running. If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
496 STARTING AND OPERATING Trailer Sway Control (TSC) TSC uses sensors in the vehicle to recognize an excessively swaying trailer and will take the appropriate actions to attempt to stop the sway. The system may reduce engine power and apply the brake of the appropriate wheel(s) to counteract the sway of the trailer. TSC will become active automatically once an excessively swaying trailer is recognized. Note that TSC cannot stop all trailers from swaying.
STARTING AND OPERATING 497 HSA Activation Criteria The following criteria must be met in order for HSA to activate: • Vehicle must be stopped. • Vehicle must be on a 6% (approximate) grade or greater hill. WARNING! There may be situations on minor hills with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling may occur. This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking the vehicle.
498 STARTING AND OPERATING For vehicles not equipped with the EVIC, perform the following steps: within 20 seconds. The “ESC Activation/Malfunction Indicator Light” should turn on and turn off two times. NOTE: You must complete Steps 1 through 8 within 90 seconds. 8. Rotate the steering wheel back to center and then an additional half-turn to the right. 1. Center the steering wheel (front wheels pointing straight forward). 9. Turn the ignition switch to the OFF position and then back to the ON position.
STARTING AND OPERATING 499 WARNING! WARNING! (Continued) • If you use a trailer brake controller with your trailer, your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released, there may not be enough brake pressure to hold the vehicle and trailer on a hill and this could cause a collision with another vehicle or object behind you.
500 STARTING AND OPERATING TIRE SAFETY INFORMATION NOTE: Tire Markings • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation.
STARTING AND OPERATING 501 • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure comstandards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall. Example: 31x10.5 R15 LT. the sidewall preceding the size designation. Example: T145/80D18 103M. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ...
502 STARTING AND OPERATING EXAMPLE: 65 = Aspect ratio in percent (%) – Ratio of section height to section width of tire 10.
STARTING AND OPERATING 503 EXAMPLE: Load Identification: ⴖ....blank....
504 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING 505 Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
506 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. B-Pillar Location For Tire And Loading Information Placard 2.
STARTING AND OPERATING 507 To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of 4. Cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires. XXX kg” on the Tire and Loading Information placard. The combined weight of occupants, cargo/luggage and Loading trailer tongue weight (if applicable) should never exceed The vehicle maximum load on the tire must not exceed the weight referenced here.
508 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
STARTING AND OPERATING 509 5
510 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING 511 WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Ride Comfort And Vehicle Stability Proper tire inflation contributes to a comfortable ride. Over-inflation produces a jarring and uncomfortable ride.
512 STARTING AND OPERATING At least once a month: mile (1.6 km) after a three hour period. The cold tire inflation pressure must not exceed the maximum infla• Check and adjust tire pressure with a good quality tion pressure molded into the tire sidewall. pocket-type pressure gauge. Do not make a visual judgement when determining proper inflation.
STARTING AND OPERATING 513 Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds and WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
514 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and Summer Or Three Season Tires — If Equipped additional information. Summer tires provide traction in both wet and dry Damaged Run Flat tires, or Run Flat tires that have conditions, and are not intended to be driven in snow or experienced a loss of pressure should be replaced imme- on ice.
STARTING AND OPERATING 515 If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Run Flat Tires — If Equipped Run Flat tires allow you the capability to drive 50 miles (80 km) at 50 mph (80 km/h) after a rapid loss of inflation pressure. This rapid loss of inflation is referred to as the Run Flat mode.
516 STARTING AND OPERATING rotation for your vehicle. If your vehicle has this option, refer to an authorized tire dealer for the recommended NOTE: For vehicles equipped with TIREFIT instead of a tire rotation pattern. spare tire, please refer to “TIREFIT KIT” in “What To Do Compact Spare Tire — If Equipped In Emergencies” for further information.
STARTING AND OPERATING 517 Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tire. Do not install more than one compact spare tire and wheel on the vehicle at any given time. WARNING! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life.
518 STARTING AND OPERATING WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressures listed on your Tire and Loading Information Placard located on the driver’s side B-Pillar or the rear edge of the driver’s side door.
STARTING AND OPERATING 519 These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer replaced. to “Replacement Tires” in this section for further information.
520 STARTING AND OPERATING WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. Information placard or the Vehicle Certification Label for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall.
STARTING AND OPERATING 521 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
522 STARTING AND OPERATING TIRE CHAINS (TRACTION DEVICES) Use of traction devices require sufficient tire-to-body clearance. Follow these recommendations to guard against damage: • Traction device must be of proper size for the tire, as recommended by the traction device manufacturer. • Install on front tires only. • On a 225/65R16 100H use of a traction device that meets the SAE type “Class S” specification is recommended.
STARTING AND OPERATING 523 CAUTION! (Continued) • Install device as tightly as possible and then retighten after driving about ½ mile (0.8 km). • Do not exceed 30 mph (48 km/h). • Drive cautiously and avoid severe turns and large bumps, especially with a loaded vehicle. • Do not drive for a prolonged period on dry pavement. • Observe the traction device manufacturer’s instructions on the method of installation, operating speed, and conditions for use.
524 STARTING AND OPERATING The suggested rotation method is the “rearward cross” shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be reversed. Tire Rotation TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure based on the cold inflation tire placard pressure requirements found on the tire placard label located on the driver’s-side B-Pillar.
STARTING AND OPERATING 525 The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low pressure warning threshold for any reason, including low temperature effects, or natural air pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above recommended cold tire placard pressure.
526 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Using aftermarket tire sealants may cause the Tire Pressure Monitoring System (TPMS) sensor to become inoperable.
STARTING AND OPERATING 527 • Seasonal temperature changes will affect tire pressure, Tire Pressure Monitoring Low Tire Pressure and the TPMS will monitor the actual tire pressure in Warnings the tire. Base System The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the Receiver Module.
528 STARTING AND OPERATING NOTE: The vehicle may need to be driven for up to 20 • Accumulation of excessive snow and/or ice around minutes above 15 mph (24 km/h) to receive this inforthe wheels or wheel housings. mation. • Using tire chains on the vehicle. The “Tire Pressure Monitoring Telltale Light” will flash • Using wheels/tires not equipped with TPMS sensors. on and off for 75 seconds, and remain on solid when a system fault is detected.
STARTING AND OPERATING 529 • After driving for up to 20 minutes above 15 mph (24 km/h), the “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and then remain on solid. Premium System — If Equipped The TPMS uses wireless technology with wheel rimmounted electronic sensors to monitor tire pressure levels.
530 STARTING AND OPERATING NOTE: The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this inforThe “Tire Pressure Monitoring Telltale Light” will illumimation. nate in the instrument cluster, and an audible chime will be activated when one or more of the four active road tire SERVICE TPM SYSTEM Message pressures are low.
STARTING AND OPERATING 531 message will not be present, and a pressure value will be message is then followed by a graphic display with displayed instead of dashes. A system fault can occur by pressure values still shown. This indicates that the pressure values are still being received from the TPM sensors any of the following scenarios: but they may not be in the correct vehicle position.
532 STARTING AND OPERATING pressure value instead of dashes (- -), as long no tire • After driving the vehicle for up to 20 minutes above pressure is below the low pressure warning limit in 15 mph (24 km/h), the “Tire Pressure Monitoring any of the four active road tires. Telltale Light” will flash on and off for 75 seconds and then remain on solid.
STARTING AND OPERATING 533 The TPM sensors are regulated under one of the follow- Light spark knock at low engine speeds is not harmful to your engine. However, continued heavy spark knock at ing licenses: high speeds can cause damage and immediate service is United States MRXC4W4MA4 required. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations.
534 STARTING AND OPERATING Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline.” Reformulated gasoline contain oxygenates and are specifically blended to reduce vehicle emissions and improve air quality. The manufacturer supports the use of reformulated gasoline. Properly blended reformulated gasoline will provide excellent performance and durability of engine and fuel system components.
STARTING AND OPERATING 535 E-85 Usage In Non-Flex Fuel Vehicles • Disconnect and reconnect the battery to reset the engine controller memory. Non-Flex Fuel Vehicles (FFV) are compatible with gasoline containing 10% ethanol (E10). Gasoline with higher ethanol More extensive repairs will be required for prolonged exposure to E-85 fuel. content may void the New Vehicle Limited Warranty.
536 STARTING AND OPERATING Materials Added To Fuel CAUTION! (Continued) All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law.
STARTING AND OPERATING 537 Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
538 STARTING AND OPERATING FLEXIBLE FUEL — IF EQUIPPED E-85 General Information The information in this section is for Flexible Fuel vehicles only. These vehicles can be identified by a unique fuel filler door label that states Ethanol (E-85) or Unleaded Gasoline Only. This section only covers those subjects that are unique to these vehicles. Please refer to the other sections of this manual for information on features that are common between Flexible Fuel and gasoline-only powered vehicles.
STARTING AND OPERATING 539 WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smoking materials lit in or near the vehicle when removing the fuel filler tube cap (gas cap) or filling the tank. Do not use E-85 as a cleaning agent and never use it near an open flame. Fuel Requirements E-85 Badge Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline.
540 STARTING AND OPERATING For best results, a refueling pattern that avoids alternat- • Some additives used in regular gasoline are not fully ing between E-85 and unleaded gasoline is recomcompatible with E-85 and may form deposits in your engine. To eliminate driveability issues that may be mended.
STARTING AND OPERATING 541 Starting Replacement Parts The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C). In the range of 0°F (-18°C) to 32°F (0°C), you may experience an increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up. Many components in your Flexible Fuel Vehicle (FFV) are designed to be compatible with ethanol.
542 STARTING AND OPERATING NOTE: The driver’s side sliding door cannot be opened while the fuel door is open. This feature operates only Fuel Filler Cap (Gas Cap) when the sliding door is fully closed prior to opening the The gas cap is located behind the fuel filler door on the fuel door. left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.
STARTING AND OPERATING 543 WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the MIL to turn on. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling.
544 STARTING AND OPERATING VEHICLE LOADING • Vehicle Identification Number (VIN) As required by National Highway Traffic Safety Admin- • Type of Vehicle istration regulations, your vehicle has a certification label • Month Day and Hour of Manufacture (MDH) affixed to the driver’s side door or B-Pillar. The bar code allows a computer scanner to read the VIN. If seats are removed for carrying cargo, do not exceed the Gross Vehicle Weight Rating (GVWR) specified GVWR and GAWR.
STARTING AND OPERATING 545 WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have a collision. Inflation Pressure This is the cold tire inflation pressure for your vehicle for all loading conditions up to full GAWR.
546 STARTING AND OPERATING The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation. Weigh it on a commercial scale to ensure that it is not over the GVWR. have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight. Improper weight distribution can have an adverse effect on the way your vehicle steers and handles and the way the brakes operate.
STARTING AND OPERATING 547 Common Towing Definitions Gross Axle Weight Rating (GAWR) The following trailer towing related definitions will assist The GAWR is the maximum capacity of the front and rear you in understanding the following information: axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear Gross Vehicle Weight Rating (GVWR) GAWR.
548 STARTING AND OPERATING Frontal Area Weight-Carrying Hitch The frontal area is the maximum height multiplied by the A weight-carrying hitch supports the trailer tongue maximum width of the front of a trailer. weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle.
STARTING AND OPERATING 549 Trailer sway control and a weight distributing (load equalizing) hitch are recommended for heavier Tongue Weights (TW) and may be required depending on vehicle and trailer configuration/loading to comply with Gross Axle Weight Rating (GAWR) requirements. Weight Distribution hitched are recommended for loads in excess of 5,000 lbs (2,268 kg).
550 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ Transmission GCWR (Gross Combined Weight Rating) 8,750 lbs (3 969 kg) Frontal Area Up to 2 persons & Luggage 3,600 lbs (1 633 kg)* 8,750 lbs (3 969 kg) 40 sq ft (3.72 sq m) 3 to 5 persons & Luggage 3,350 lbs (1 519 kg)* 8,750 lbs (3 969 kg) 40 sq ft (3.
STARTING AND OPERATING 551 NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information” in “Starting and Operating” for further information. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
552 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “Tire and Loading Information” placard for the maximum combined weight of occupants and cargo for your vehicle. Towing Requirements CAUTION! • Do not tow a trailer at all during the first 500 miles (805 km) the new vehicle is driven.
STARTING AND OPERATING 553 WARNING! WARNING! (Continued) Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision.
554 STARTING AND OPERATING WARNING! (Continued) • Total weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. GVWR 2. GTW 3. GAWR 4. Tongue weight rating for the trailer hitch utilized. • Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “Tires – General Information” in “Starting And Operating” for proper tire inflation procedures.
STARTING AND OPERATING 555 Towing Requirements — Trailer Brakes • Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. • An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required.
556 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and sevenpin wiring harness. Use a factory approved trailer harness and connector. NOTE: Do not cut or splice wiring into the vehicles wiring harness.
STARTING AND OPERATING 557 Towing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. Automatic Transmission The DRIVE gear can be selected when towing. However, if frequent shifting occurs while in DRIVE, use the Electronic Range Select (ERS) shift control to select a lower gear range.
558 STARTING AND OPERATING If you REGULARLY tow a trailer for more than 45 minutes of continuous operation, then change the transmission fluid and filter as specified for “police, taxi, fleet, or frequent trailer towing.” Refer to the “Maintenance Schedule” for the proper maintenance intervals. Cooling System Electronic Speed Control — If Equipped When stopped for short periods, shift the transmission into NEUTRAL and increase engine idle speed. • Do not use in hilly terrain or with heavy loads.
STARTING AND OPERATING 559 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.
560 STARTING AND OPERATING Recreational Towing — All Models Recreational towing is allowed ONLY if the front wheels are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this procedure: 1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer’s instructions. 2. Drive the front wheels onto the tow dolly. 3. Firmly apply the parking brake. Place the transmission in PARK. 4.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 HAZARD WARNING FLASHERS . . . . . . . . . . .563 䡵 JACKING AND TIRE CHANGING — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . 䡵 IF YOUR ENGINE OVERHEATS . . . . . . . . . . . .563 ▫ Jack Location . . . . . . . . . . . . . . . . . . 䡵 TIREFIT KIT — IF EQUIPPED . . . . . . . . . . . . .564 ▫ Spare Tire Removal . . . . . . . . . . . . . . ▫ TIREFIT Storage . . . . . . . . . . . . . . . . . . . . . .565 ▫ To Access Spare Tire Winch Drive Nut.
562 WHAT TO DO IN EMERGENCIES ▫ Road Tire Installation . . . . . . . . . . . . . . . . . . .595 䡵 FREEING A STUCK VEHICLE . . . . . . . . . . . . .601 䡵 JUMP-STARTING . . . . . . . . . . . . . . . . . . . . . .597 䡵 SHIFT LEVER OVERRIDE . . . . . . . . . . . . . . . .602 ▫ Preparations For Jump-Start . . . . . . . . . . . . . .598 䡵 TOWING A DISABLED VEHICLE . . . . . . . . . . .604 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . .
WHAT TO DO IN EMERGENCIES 563 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the In any of the following situations, you can reduce the lower center area of the instrument panel. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning • On the highways — slow down. flasher.
564 WHAT TO DO IN EMERGENCIES CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately, and call for service. WARNING! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator.
WHAT TO DO IN EMERGENCIES 565 TIREFIT Storage 1. Open the liftgate. The TIREFIT kit is stowed behind the rear left side trim 2. Turn the two rear left side trim panel latches to release panel in the rear cargo area. the trim panel.
566 WHAT TO DO IN EMERGENCIES TIREFIT Kit Components And Operation Using The Mode Select Knob And Hoses Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only. Use the Black Air Pump Hose (7) when selecting this mode.
WHAT TO DO IN EMERGENCIES 567 Using The Power Button Push and release the Power Button (4) once to turn On the TIREFIT kit. Push and release the Power Button (4) again to turn Off the TIREFIT kit. Using The Deflation Button Press the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated.
568 WHAT TO DO IN EMERGENCIES • When the TIREFIT sealant is in a liquid form, clean • Do not lift or carry the TIREFIT kit by the hoses. water, and a damp cloth will remove the material from the vehicle or tire and wheel components. Once the WARNING! sealant dries, it can easily be peeled off and properly • Do not attempt to seal a tire on the side of the discarded. vehicle closest to traffic.
WHAT TO DO IN EMERGENCIES 569 WARNING! (Continued) WARNING! (Continued) – If you are unsure of the condition of the tire or the wheel. • Keep TIREFIT away from open flames or heat source. • A loose TIREFIT kit thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the TIREFIT kit in the place provided. Failure to follow these warnings can result in injuries that are serious or fatal to you, your passengers, and others around you.
570 WHAT TO DO IN EMERGENCIES Sealing A Tire With TIREFIT (B) Setting Up To Use TIREFIT: (A) Whenever You Stop To Use TIREFIT: 1. Push in the Mode Select Knob (5) and turn to the Sealant Mode position. 1. Pull over to a safe location and turn on the vehicle’s Hazard Warning flashers. 2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the end of the hose. 2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground. 3.
WHAT TO DO IN EMERGENCIES 571 (C) Injecting TIREFIT Sealant Into The Deflated Tire: • Always start the engine before turning ON the TIREFIT kit. the Sealant Hose (6) to the valve stem. Check that the Mode Select Knob (5) is in the Sealant Mode position and not Air Mode. Press the Power Button (4) to turn On the TIREFIT kit. 2. Connect the Power Plug (8) to a different 12 Volt power outlet in your vehicle or another vehicle, if available.
572 WHAT TO DO IN EMERGENCIES If the sealant (white fluid) does flow through the If the tire does not inflate to at least 26 psi (1.8 Bar) Sealant Hose (6): pressure within 15 minutes: 1. Continue to operate the pump until sealant is no longer flowing through hose (typically takes 30 - 70 seconds). As the sealant flows through the Sealant Hose (6), the Pressure Gauge (3) can read as high as 70 psi (4.8 Bar). The Pressure Gauge (3) will decrease quickly from approximately 70 psi (4.
WHAT TO DO IN EMERGENCIES 573 3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location. Quickly proceed to (D) “Drive Vehicle.” CAUTION! • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully.
574 WHAT TO DO IN EMERGENCIES (E) After Driving: If the tire pressure is 19 psi (1.3 Bar) or higher: Pull over to a safe location. Refer to “Whenever You Stop 1. Press the Power Button (4) to turn on TIREFIT and to Use TIREFIT” before continuing. inflate the tire to the pressure indicated on the tire and loading information label on the driver-side door 1. Push in the Mode Select Knob (5) and turn to the Air opening. Mode position. 2.
WHAT TO DO IN EMERGENCIES 575 5. Replace the Sealant Bottle (1) and Sealant Hose (6) 5. Position the new Sealant Bottle (1) in the housing so that the Sealant Hose (6) aligns with the hose slot in assembly at your authorized dealer as soon as posthe front of the housing. Press the bottle into the sible. Refer to (F) “Sealant Bottle and Hose Replacehousing. An audible click will be heard indicating the ment”. bottle is locked into place.
576 WHAT TO DO IN EMERGENCIES Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Bolt Size 100 Ft-Lbs (135 N·m) M12 x 1.25 Lug Nut/ Bolt Socket Size 19 mm **Use only Chrysler recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Wheel Mounting Surface Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice.
WHAT TO DO IN EMERGENCIES 577 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. JACKING AND TIRE CHANGING — IF EQUIPPED WARNING! Torque Patterns After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
578 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • Never start or run the engine while the vehicle is on a jack. • The jack is designed to be used as a tool for changing tires only.
WHAT TO DO IN EMERGENCIES 579 Spare Tire Removal The spare tire is stowed inside a protective cover located under the center of the vehicle between the front doors by means of a cable winch mechanism. The “spare tire drive” nut is located on the floor, under a plastic cap at the front of the floor console or under front super console forward bin liner.
580 WHAT TO DO IN EMERGENCIES To Access Spare Tire Winch Drive Nut To access the spare tire winch drive nut and lower the spare tire, you will need to refer to one of the following center console configurations. Super Console For vehicles equipped with the Super Console, the spare tire winch assembly drive nut is located beneath the console. Super Console 1 — Lower Drawer 2 — Front Drawer 3 — Front Drawer Liner 1.
WHAT TO DO IN EMERGENCIES 581 2. Open the front drawer to expose the storage compart- Premium/Base/Cargo Center Console ment. Pull the Winch Cover assembly plug (if equipped) to 3. Remove the liner from the console’s storage compart- access the winch drive nut. ment to access the spare tire winch drive nut.
582 WHAT TO DO IN EMERGENCIES Spare Tire Tools The tool pouch contains three pieces and can be assembled into a spare tire hook; to remove the compact spare tire/cover assembly from under the vehicle, or a Winch T-handle; to raise/lower the compact spare tire/ cover assembly.
WHAT TO DO IN EMERGENCIES 583 Spare Tire Removal Instructions The spare tire is located under the vehicle beneath the center console area. 6 Assembling The Spare Tire Hook A — Spare Tire Hook/T-handle B — Extension 1 C — Extension 2 Spare Tire And Cover 1. Assemble the spare tire tools into a T-handle and place the square end over the spare tire winch drive nut.
584 WHAT TO DO IN EMERGENCIES 2. Rotate the nut to the left until the winch mechanism stops turning freely. This will allow enough slack in the cable to allow you to pull the spare tire out from underneath the vehicle. CAUTION! The winch mechanism is designed for use with the winch T-handle only. Use of an air wrench or other power tools is not recommended and can damage the winch. 3.
WHAT TO DO IN EMERGENCIES 585 4. Stand the tire/cover assembly upright and remove the Preparations For Jacking wheel spacer by squeezing the winch retaining tabs 1. Park the vehicle on a firm, level surface. Avoid ice or together. Push the retainer through the spare tire to slippery areas. release it from the wheel. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid being hit when operating the jack or changing the wheel. 2.
586 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally Jacking Instructions opposite of the jacking position. For example, if changing the right front WARNING! tire, block the left rear wheel. Carefully follow these tire changing warnings to NOTE: Passengers should not remain help prevent personal injury or damage to your in the vehicle when the vehicle is vehicle: being jacked.
WHAT TO DO IN EMERGENCIES 587 WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic.
588 WHAT TO DO IN EMERGENCIES 2. There are two jack engagement locations on each side Rear jack locations are between a pair of down-facing of the vehicle body. These locations are on the sill tabs on the sill flange of the vehicle side body. flange of the vehicle body. Jack Locations CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated.
WHAT TO DO IN EMERGENCIES 589 6 Rear Jack Engaged Front jack location is on the sill flange of the vehicle body and is located 6 in (150 mm) from door edge.
590 WHAT TO DO IN EMERGENCIES WARNING! Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. Front Jack Engaged 3. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location.
WHAT TO DO IN EMERGENCIES 591 WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Remove the wheel lug nuts, for vehicles with wheel covers, remove the cover from the wheel by hand. Do not pry the wheel cover off. Then pull the wheel off the hub. 6. Install the compact spare tire. Lightly tighten the lug nuts.
592 WHAT TO DO IN EMERGENCIES NOTE: Do not install the wheel cover on the compact 10. Place the deflated (flat) tire and compact spare tire spare. cover assembly in the rear cargo area. Do not stow the deflated tire in the compact spare tire location. 7. Lower the vehicle by turning the jack screw to the left. Have the full-sized tire repaired or replaced, as soon 8. Refer to “Torque Specifications” in this section for as possible. proper wheel lug nut torque. 11.
WHAT TO DO IN EMERGENCIES 593 Securing The Compact Spare Tire CAUTION! 1. Assemble the winch handle extensions to form a T-handle and fit the winch T-handle over the drive The winch mechanism is designed for use with the nut. Rotate the nut to the left until the winch mecha- winch T-handle only. Use of an air wrench or other nism stops turning freely. This will allow enough slack power tools is not recommended and can damage the in the cable to allow you to pull the wheel spacer out winch.
594 WHAT TO DO IN EMERGENCIES CAUTION! The compact spare tire/cover assembly must be used when the compact spare tire is stored. Failure to use this cover could drastically reduce the life of the compact spare tire. WARNING! Verify that both retainer tabs of the wheel spacer have been properly extended through the center of the wheel and compact spare tire/cover assembly.
WHAT TO DO IN EMERGENCIES 595 Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem. Install the lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts.
596 WHAT TO DO IN EMERGENCIES 3. Align the valve notch in the wheel cover with the 6. Refer to “Torque Specifications” in this section for valve stem on the wheel. Install the cover by hand, proper wheel lug nut torque. snapping the cover over the two lug nuts. Do not use 7. After 25 miles (40 km) check the lug nut torque with a a hammer or excessive force to install the cover. torque wrench to ensure that all lug nuts are properly 4.
WHAT TO DO IN EMERGENCIES 597 3. Lower the vehicle to the ground by turning the jack NOTE: When using a portable battery booster pack follow the manufacturer’s operating instructions and handle counterclockwise. precautions. 4. Refer to “Torque Specifications” in this section for proper wheel lug nut torque. CAUTION! 5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are properly seated against the wheel.
598 WHAT TO DO IN EMERGENCIES Preparations For Jump-Start The battery in your vehicle is located on the left side of the engine compartment. Positive Battery Post WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You could be seriously injured.
WHAT TO DO IN EMERGENCIES 599 3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle.
600 WHAT TO DO IN EMERGENCIES 4. Connect the opposite end of the negative (-) jumper 6. Once the engine is started, remove the jumper cables cable to a good engine ground (exposed metal part of in the reverse sequence: the discharged vehicle’s engine) away from the battery Disconnecting The Jumper Cables and the fuel injection system. 1. Disconnect the negative (-) end of the jumper cable from the engine ground of the vehicle with the disWARNING! charged battery.
WHAT TO DO IN EMERGENCIES 601 CAUTION! CAUTION! Accessories plugged into the vehicle power outlets draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough without engine operation, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. Racing the engine or spinning the wheels may lead to transmission overheating and failure.
602 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! (Continued) • When “rocking” a stuck vehicle by shifting between DRIVE and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no transmission shifting occurring). explode and injure someone.
WHAT TO DO IN EMERGENCIES 603 3. Using a small screwdriver or similar tool, remove the 4. Press and maintain firm pressure on the brake pedal. shift lever override access cover (located near the top 5. Insert the screwdriver or similar tool into the access right of the shift lever in the instrument panel). hole, and push and hold the override release lever forward. 6. Move the shift lever to the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL. 8.
604 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service.
WHAT TO DO IN EMERGENCIES 605 Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for this purpose, following equipment manufacturer’s instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to main structural members of the vehicle, not to bumpers or associated brackets. State and local laws regarding vehicles under tow must be observed. If you must use the accessories (wipers, defrosters, etc.
606 WHAT TO DO IN EMERGENCIES The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a flatbed. If flatbed equipment is not available, and the transmission is operable, the vehicle may be flat towed (with all four wheels on the ground) under the following conditions: • The transmission must be in NEUTRAL. • The towing distance must not exceed 15 miles (24 km). • The towing speed must not exceed 25 mph (40 km/h).
MAINTAINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMPARTMENT — 3.6L . . . . . . . . . .609 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . .617 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .610 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . .618 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . .610 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . .620 䡵 EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . .
608 MAINTAINING YOUR VEHICLE ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . .637 ▫ Cleaning The Instrument Panel Cupholders . .643 䡵 FUSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .644 ▫ Totally Integrated Power Module . . . . . . . . . .644 䡵 VEHICLE STORAGE . . . . . . . . . . . . . . . . . . . .651 䡵 REPLACEMENT BULBS . . . . . . . . . . . . . . . . .652 䡵 BULB REPLACEMENT . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 609 ENGINE COMPARTMENT — 3.
610 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
MAINTAINING YOUR VEHICLE 611 “Electronic Vehicle Information Center (EVIC)” in ”Understanding Your Instrument Panel” for further information. Tighten the gas cap until a ⬙clicking⬙ sound is heard. This is an indication that the gas cap is properly tightened. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration.
612 MAINTAINING YOUR VEHICLE Your vehicle has a simple ignition actuated test, which • The MIL will not flash at all and will remain fully illuminated until you turn OFF the ignition or start the you can use prior to going to the test station. To check if engine. This means that your vehicle’s OBD II system your vehicle’s OBD II system is ready, you must do the is ready and you can proceed to the I/M station. following: 1.
MAINTAINING YOUR VEHICLE 613 NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil Use of genuine MOPAR® parts for normal/scheduled penalties being assessed against you. maintenance and repairs is highly recommended to ensure the designed performance. Damage or failures WARNING! caused by the use of non-MOPAR® parts for maintenance and repairs will not be covered by the New Vehicle You can be badly injured working on or around a Limited Warranty.
614 MAINTAINING YOUR VEHICLE Besides those maintenance items specified in the fixed “Maintenance Schedule”, there are other components which may require servicing or replacement in the future. CAUTION! • Failure to properly maintain your vehicle or perform repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle performance. Immediately have potential malfunctions examined by an authorized dealer or qualified repair center.
MAINTAINING YOUR VEHICLE 615 Change Engine Oil Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. To assure proper engine lubrication, the engine oil must Refer to the “Maintenance Schedule” for further informabe maintained at the correct level. Check the oil level at tion. regular intervals, such as every fuel stop.
616 MAINTAINING YOUR VEHICLE American Petroleum Institute (API) Engine Oil Identification Symbol Engine Oil Viscosity — 3.6L Engine MOPAR® SAE 5W-20 engine oil approved to Chrysler Material Standard MS-6395 such as Pennzoil®, Shell This symbol means that the oil has Helix® or equivalent is recommended for all operating been certified by the American temperatures. This engine oil improves low temperature Petroleum Institute (API). The starting and vehicle fuel economy.
MAINTAINING YOUR VEHICLE 617 station or governmental agency for advice on how and where used oil and oil filters can be safely discarded in You may use synthetic engine oils provided the recomyour area. mended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes Engine Oil Filter are followed. The engine oil filter should be replaced with a new filter Materials Added To Engine Oil at every engine oil change.
618 MAINTAINING YOUR VEHICLE WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
MAINTAINING YOUR VEHICLE 619 WARNING! CAUTION! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information. • A hot exhaust system can start a fire if you park over materials that can burn.
620 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
MAINTAINING YOUR VEHICLE 621 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. Refer to “Jump-Starting Procedures” in “What To Do In Emergencies” for further information. • Battery gas is flammable and explosive.
622 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance WARNING! (Continued) For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. • The air conditioning system contains refrigerant under high pressure.
MAINTAINING YOUR VEHICLE 623 The A/C air filter is located in the fresh air inlet behind R-134a Air Conditioning Refrigerant is a hydrofluoro- the glove box. Perform the following procedure to recarbon (HFC) that is endorsed by the Environmental place the filter: Protection Agency and is an ozone-saving product. How- 1. Open the glove compartment and remove all contents. ever, the manufacturer recommends that air conditioning service be performed by authorized dealer or other 2.
624 MAINTAINING YOUR VEHICLE CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. 7. Rotate the glove compartment door back into position. Body Lubrication A/C Air Filter Replacement 5. Remove the A/C air filter by pulling it straight out of the housing. 6. Install the A/C air filter with the arrow on the filter pointing toward the floor.
MAINTAINING YOUR VEHICLE 625 components to ensure proper function. When performing Avoid using the wiper blades to remove frost or ice from other underhood services, the hood latch, release mecha- the windshield. Keep the blade rubber out of contact with nism and safety catch should be cleaned and lubricated. petroleum products such as engine oil, gasoline, etc. The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring.
626 MAINTAINING YOUR VEHICLE The washer fluid reservoir will hold a full gallon of fluid Cooling System when the Low Washer Fluid Light illuminates. WARNING! WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. After the engine has warmed, operate the defroster for a few minutes to reduce the possibility of smearing or freezing the fluid on the cold windshield.
MAINTAINING YOUR VEHICLE 627 Coolant Checks Check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty, the system should be drained, flushed, and refilled with fresh OAT coolant (conforming to MS-12106) only by an authorized dealer. Check the front of the A/C condenser for any accumulation of bugs, leaves, etc.
628 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze).
MAINTAINING YOUR VEHICLE 629 you use the same engine coolant (OAT coolant conform- • Use only high purity water such as distilled or deioning to MS-12106) throughout the life of your vehicle. ized water when mixing the water/engine coolant (antifreeze) solution. The use of lower quality water Please review these recommendations for using Organic will reduce the amount of corrosion protection in the Additive Technology (OAT) engine coolant (antifreeze) engine cooling system.
630 MAINTAINING YOUR VEHICLE • Mixing engine coolant (antifreeze) types is not recommended and can result in cooling system damage. If HOAT and OAT coolant are mixed in an emergency, have a authorized dealer drain, flush, and refill with OAT coolant (conforming to MS-12106) as soon as possible. Cooling System Pressure Cap The cap must be fully tightened to prevent loss of engine coolant (antifreeze), and to ensure that engine coolant (antifreeze) will return to the radiator from the coolant recovery tank.
MAINTAINING YOUR VEHICLE 631 unless checking for engine coolant (antifreeze) freeze point or replacing coolant. Advise your service attendant Used ethylene glycol-based engine coolant (antifreeze) is of this. As long as the engine operating temperature is a regulated substance requiring proper disposal. Check satisfactory, the coolant bottle need only be checked once with your local authorities to determine the disposal a month. rules for your community.
632 MAINTAINING YOUR VEHICLE If an examination of your engine compartment shows no • Make sure that the coolant expansion bottle overflow evidence of radiator or hose leaks, the vehicle may be hoses are not kinked or obstructed. safely driven. The vapor will soon dissipate. • Keep the front of the radiator clean. If your vehicle is • Do not overfill the coolant expansion bottle. equipped with air conditioning, keep the front of the condenser clean.
MAINTAINING YOUR VEHICLE 633 WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency. Master Cylinder — Brake Fluid Level Check Clean the top of the master cylinder area before removing the cap.
634 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir.
MAINTAINING YOUR VEHICLE 635 WARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Automatic Transmission CAUTION! Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder, and will require more frequent fluid and filter changes.
636 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission components. Such damage is not covered by the New Vehicle Limited Warranty. If a transmission fluid leak occurs, visit your authorized dealer immediately. Severe transmission damage may occur. Your authorized dealer has the proper tools to adjust the fluid level accurately.
MAINTAINING YOUR VEHICLE 637 Appearance Care And Protection From Corrosion What Causes Corrosion? Protection Of Body And Paint From Corrosion Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. Vehicle body care requirements vary according to geographic locations and usage. Chemicals that make roads passable in snow and ice and those that are sprayed on trees and road surfaces during other seasons are highly corrosive to the metal in your vehicle.
638 MAINTAINING YOUR VEHICLE • If insects, tar, or other similar deposits have accumu- Special Care lated on your vehicle, use MOPAR® Super Kleen Bug • If you drive on salted or dusty roads or if you drive and Tar Remover to remove. near the ocean, hose off the undercarriage at least once a month. • Use a high quality cleaner wax, such as MOPAR® Cleaner Wax to remove road film, stains and to protect • It is important that the drain holes in the lower edges your paint finish.
MAINTAINING YOUR VEHICLE 639 • If you carry special cargo such as chemicals, fertilizers, To remove heavy soil and/or excessive brake dust, use de-icer salt, etc., be sure that such materials are well MOPAR® Wheel Cleaner or equivalent or select a nonabrasive, non-acidic cleaner. packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • For chrome wheels, use MOPAR® Chrome Cleaner (Part#04318013) or equivalent.
640 MAINTAINING YOUR VEHICLE Stain Repel Fabric Cleaning Procedure — If Equipped Interior Care Instrument Panel Surfaces Stain Repel seats may be cleaned in the following man- The instrument panel cover has a low glare surface, ner: which minimizes reflections in the windshield. Do not • Remove as much of the stain as possible by blotting use protectants or other products which may cause undesirable reflections. Use soap and warm water to with a clean, dry towel. restore the low glare surface.
MAINTAINING YOUR VEHICLE 641 Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOPAR® Total Clean or equivalent. Care should be taken to avoid soaking your leather upholstery with any liquid.
642 MAINTAINING YOUR VEHICLE 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive All glass surfaces should be cleaned on a regular basis with cleaners. If soap is used, wipe clean with a clean damp MOPAR® Glass Cleaner, or any commercial householdrag. type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the inside rear window equipped 2. Dry with a soft cloth.
MAINTAINING YOUR VEHICLE 643 WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.).
644 MAINTAINING YOUR VEHICLE FUSES WARNING! (Continued) WARNING! • When replacing a blown fuse, always use an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material. Failure to use proper fuses may result in serious personal injury, fire and/or property damage.
MAINTAINING YOUR VEHICLE 645 CAUTION! Totally Integrated Power Module • When installing the Totally Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating.
646 MAINTAINING YOUR VEHICLE The numbers inside the TIPM cover correspond to the following table.
MAINTAINING YOUR VEHICLE 647 Cavity J12 J13 J14 J15 J17 J18 J19 J20 J21 J22 M1 M2 M3 M4 M5 Cartridge Fuse 30 Amp Pink 60 Amp Yellow 40 Amp Green 40 Amp Green 40 Amp Green 20 Amp Blue 60 Amp Yellow 30 Amp Pink 20 Amp Blue 25 Amp Natural — — — — — Mini-Fuse — — — — — — — — — 15 Amp Blue 20 Amp Yellow 20 Amp Yellow 10 Amp Red 25 Amp Natural Description HVAC Rear Blower, Radiator Fan Motor Ignition Off Draw (IOD) – Main Rear Window Defogger Front Blower Starter Solenoid Powertrain Control Module Trans Range
648 MAINTAINING YOUR VEHICLE Cavity M6 Cartridge Fuse — Mini-Fuse 20 Amp Yellow M7 — 20 Amp Yellow M8 M9 M10 — — — 20 Amp Yellow 20 Amp Yellow 15 Amp Blue M11 M12 M13 — — — 10 Amp Red 30 Amp Green 20 Amp Yellow M14 — 20 Amp Yellow Description Power Outlet #1 (ACC), Rain Sensor, Cigar Lighter (Instrument Panel or with Console Rear) Power Outlet #2 (BATT/ACC SELECT) – Center Seat or with Console Rear Front Heated Seat – If Equipped Rear Heated Seat – If Equipped Ignition Off Draw — Video Syste
MAINTAINING YOUR VEHICLE 649 Cavity M15 Cartridge Fuse — Mini-Fuse 20 Amp Yellow M16 M17 M18 M19 M20 — — — — — 10 Amp Red 15 Amp Blue 15 Amp Blue 25 Amp Natural 15 Amp Blue M21 M22 M23 M24 M25 M26 — — — — — — 20 Amp Yellow 10 Amp Red 10 Amp Red 25 Amp Natural 20 Amp Yellow 10 Amp Red Description Rear View Mirror, Instrument Cluster, MultiFunction Control Switch, Tire Pressure Monitor, Glow Plug Module – If Equipped Airbag Module/Occupant Classification Module Left Tail/License/Park Lamp, Running L
650 MAINTAINING YOUR VEHICLE Cavity M27 M28 M29 M30 M31 M32 M33 M34 Cartridge Fuse — — — — — — — — Mini-Fuse 10 Amp Red 10 Amp Red 10 Amp Red 15 Amp Blue 20 Amp Yellow 10 Amp Red 10 Amp Red 10 Amp Red M35 M36 — — 10 Amp Red 20 Amp Yellow Description Wireless Control Module, Keyless Entry Module Powertrain, Transmission Control Module Occupant Classification Module Rear Wiper Module, Power Folding Mirror Back-Up Lamps Airbag Module, THATCHUM – If Equipped Powertrain Park Assist, Heater Climate Control
MAINTAINING YOUR VEHICLE 651 Cavity M37 Cartridge Fuse — Mini-Fuse 10 Amp Red M38 — 25 Amp Natural Description Antilock Brakes, Stability Control, Stop Lamp, Fuel Pump Door Lock/Unlock Motors, Liftgate Lock/Unlock Motors The power windows are fused by a 25 Amp circuit • Or, disconnect the negative cable from the battery. breaker located in the Totally Integrated Power Module.
652 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS Interior Bulbs Center & Rear Dome Lamp Center & Rear Reading Lamps Front Door Courtesy Lamp Front Header Reading Lamps – If Equipped Instrument Cluster Lamps Liftgate Lamp(s) Overhead Console Reading Lamps Bulb Number 578 578 578 578 PC74 578 PC579 Removable Console Lamp – If Equipped Visor Vanity Lamps Bulb Number 194 6501966 NOTE: For lighted switches, see your authorized dealer for replacement instructions.
MAINTAINING YOUR VEHICLE 653 Rear Turn Signal Lamp Rear Tail, Stop, and Side Marker Lamp Center High-Mounted Stop Lamp Backup Lamp License Bulb Number 3757A LED (Serviced at Authorized Dealer) LED (Serviced at Authorized Dealer) 3157 168 BULB REPLACEMENT NOTE: Lens fogging can occur under certain atmospheric conditions. This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the lamps on will usually accelerate the clearing process.
654 MAINTAINING YOUR VEHICLE NOTE: On vehicles equipped with High Intensity Discharge (HID) headlamps, when the headlamps are turned on, there is a blue hue to the lamps. This diminishes and becomes more white after approximately 10 seconds, as the system charges. Quad Headlamps 1. Raise the hood to access the high or low beam bulbs at the rear of the headlamp housing. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
MAINTAINING YOUR VEHICLE 655 Front Side Marker Lamp Front Fog Lamp 1. Raise the hood to access the rear of the headlamp NOTE: Access to the fog lamp bulb is from the rear of the housing. fascia. On the left rear side of the fascia, remove the push pin and lower the hinged access door on the air dam. NOTE: Access is somewhat limited. You may have to remove the inner fender well or remove the headlamp 1.
656 MAINTAINING YOUR VEHICLE Rear Turn Signal And Backup Lamp 1. Raise the liftgate. 2. Remove the tail lamp assembly by removing the two screws from the inboard side. Use a fiber stick or similar tool to gently pry the light on the outboard side to disengage the two ball studs. NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint. • The PRY location is best closest to the studs while dislodging them separately. 3.
MAINTAINING YOUR VEHICLE 657 Center High-Mounted Stop Lamp (CHMSL) License Lamp The CHMSL uses LED lamps that are not serviceable The license plate lamp is located under the tailgate light separately. The CHMSL must be replaced as an assembly, bar and above the license plate. see your authorized dealer. 1. Using a small screwdriver, press inward the locking tab on the outboard side of the lamp assembly and pull down on the lamp assembly for removal. 2.
658 MAINTAINING YOUR VEHICLE FLUID CAPACITIES U.S. Metric Fuel (Approximate) 20 Gallons 76 Liters Engine Oil with Filter 3.6L Engine (SAE 5W-20, API Certi6 Quarts 5.6 Liters fied). Cooling System * 3.6L Engine (MOPAR® Antifreeze/ 13.4 Quarts 12.6 Liters Engine Coolant 10 Year/150,000 Mile Formula or equivalent) meeting the requirements of Chrysler Material Standard MS-12106. * Includes heater and coolant recovery bottle filled to MAX level. Add 2.9 Qts (2.8 L) if equipped with a rear heater.
MAINTAINING YOUR VEHICLE 659 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106.
660 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part Use Only ATF+4® Automatic Transmission Fluid. Failure to use ATF+4® fluid may affect the function or performance of your transmission. We recommend MOPAR® ATF+4® Fluid. We recommend you use MOPAR® DOT 3. If DOT 3 brake fluid is not available, then DOT 4 is acceptable.
M A I N T E N A ▫ Maintenance Chart . . . . . . . . . . . . . . . . . . . .664 N C E MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE . . . . . . . . . . . . .
M A I N T E N A N C E S C H E D U L E S 8 662 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE Your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This means that service is required for your vehicle.
MAINTENANCE SCHEDULES 663 M Once A Month Or Before A Long Trip: • Check engine oil level. • Check windshield washer fluid level. • Check tire pressure and look for unusual wear or damage. Rotate tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. • Check the fluid levels of the coolant reservoir, brake master cylinder, and power steering and fill as needed. • Check function of all interior and exterior lights . Required Maintenance Intervals.
M A I N T E N A N C E 664 MAINTENANCE SCHEDULES S C H E D U L E S Or Years: Or Kilometers: 8 Maintenance Chart Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary. Inspect the brake linings, replace as necessary.
Additional Maintenance Replace engine air filter. Replace cabin/air conditioning filter. Replace spark plugs (3.6L engine). ** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.
S C H E D U L E S 8 Change automatic transmission fluid and filter if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing. Change automatic transmission fluid and filter. Inspect and replace PCV valve if necessary.
MAINTENANCE SCHEDULES 667 M WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . .671 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY). . . . . . . . . . . . . . . . . . .673 ▫ Prepare For The Appointment. . . . . . . . . . . . .671 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . .673 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . .671 䡵 WARRANTY INFORMATION . . . . . . . . . . . . .
670 IF YOU NEED CONSUMER ASSISTANCE 䡵 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES . . . . . . . . . . . . . . . . .677 ▫ Treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .677 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . .677 ▫ Temperature Grades. . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 671 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment Be Reasonable With Requests If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it is advisable to make these arrangements when you call for an appointment.
672 IF YOU NEED CONSUMER ASSISTANCE facilities, factory-trained technicians, special tools, and • Authorized dealer name the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer service manager first. Most matters can be re- Chrysler Group LLC Customer Center solved with this process. P.O.
IF YOU NEED CONSUMER ASSISTANCE 673 Mexico, D. F. Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered by Bell Canada. For TTY teletypewriter users, dial 711 and for Voice callers, dial 1-800-855-0511 to connect with a Bell Relay Service operator.
674 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract. If you purchased a service contract that is not a manufacturer’s service contract, and you require service after the manufacturer’s New Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in those documents.
IF YOU NEED CONSUMER ASSISTANCE 675 campaign. However, NHTSA cannot become involved in individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recommended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), operating at its best. or go to http://www.safercar.
676 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations.
IF YOU NEED CONSUMER ASSISTANCE 677 Call toll free at: Treadwear • 1–800–890–4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
678 IF YOU NEED CONSUMER ASSISTANCE concrete. A tire marked C may have poor traction perfor- passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A repremance. sent higher levels of performance on the laboratory test wheel, than the minimum required by law. WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
INDEX 10
680 INDEX Adding Engine Coolant (Antifreeze) . . . . . . . . . . . .628 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .542 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . .625 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .536 Adjustable Pedals . . . . . . . . . . . . . . . . . . . . . . . . .241 Airbag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 Airbag Deployment . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 681 Automatic Headlights . . . . . . . . . . . . . . . . . . . . . .227 Automatic Temperature Control (ATC) . . . . . . . . . .445 Automatic Transmission . . . . . . . . . . . . . . . . . . . .468 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . . . .636 Fluid and Filter Changes . . . . . . . . . . . . . . . . . .636 Fluid Change . . . . . . . . . . . . . . . . . . . . . . . . . .636 Fluid Level Check . . . . . . . . . . . . . . . . . . . . . . .636 Fluid Type . . . . . . . . . . . . . . .
682 INDEX Radiator (Coolant Pressure) . . . . . . . . . . . . . . . .630 Carbon Monoxide Warning . . . . . . . . . . . . . . . . . .123 Cargo Area Features . . . . . . . . . . . . . . . . . . . . . . .300 Cargo Compartment . . . . . . . . . . . . . . . . . . . . . . .300 Luggage Carrier . . . . . . . . . . . . . . . . . . . . . . . .302 Cargo (Vehicle Loading) . . . . . . . . . . . . . . . . . . . .292 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .637 Cellular Phone . . . . . . . . .
INDEX 683 Universal Consumer Interface (UCI) Conserving Fuel . . . . . . . . . . . . . . . . Console . . . . . . . . . . . . . . . . . . . . . . Console, Floor . . . . . . . . . . . . . . . . . Console, Overhead . . . . . . . . . . . . . . Console, Removable . . . . . . . . . . . . . Contract, Service . . . . . . . . . . . . . . . . Coolant Pressure Cap (Radiator Cap) . Cooling System. . . . . . . . . . . . . . . . . Adding Coolant (Antifreeze) . . . . . Coolant Capacity . . . . . . . . . . . . .
684 INDEX Door Locks Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Remote Keyless Entry (RKE) . . . . . . . . . . . . . . . .37 Door Opener, Garage. . . . . . . . . . . . . . . . . . . . . . .263 Driving Through Flowing, Rising, or Shallow Standing Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 685 Filler Location Fuel . . . . Filters Air Cleaner . . . . . . . Air Conditioning . . . Engine Oil . . . . . . . . Engine Oil Disposal . Flashers Hazard Warning . . . . Turn Signal . . . . . . . Flash-To-Pass . . . . . . . . Flexible Fuel Vehicles Cruising Range . . . . . Engine Oil . . . . . . . . Fuel Requirements . . Maintenance . . . . . . . Replacement Parts . . . Starting . . . . . . . . . . Flooded Engine Starting Fabric Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
686 INDEX Fluid Capacities . . . . . . . . . . . . . . . Fluid Leaks . . . . . . . . . . . . . . . . . . Fluid Level Checks Automatic Transmission . . . . . . . Brake . . . . . . . . . . . . . . . . . . . . . Cooling System . . . . . . . . . . . . . . Power Steering . . . . . . . . . . . . . . Fluids, Lubricants and Genuine Parts Fog Lights . . . . . . . . . . . . . . . . . . . Fog Light Service . . . . . . . . . . . . . . Fold in Floor (Stow ⬘n Go) Seating . . Freeing A Stuck Vehicle . . . . . . . . . .
INDEX 687 Gasoline, Clean Air . . . . . . . Gasoline (Fuel) . . . . . . . . . . Conserving . . . . . . . . . . . Gasoline, Reformulated . . . . Gauges Coolant Temperature . . . . Fuel . . . . . . . . . . . . . . . . Speedometer . . . . . . . . . Tachometer . . . . . . . . . . . Gear Ranges . . . . . . . . . . . . Gear Select Lever Override . General Information . . . . . . Glass Cleaning . . . . . . . . . . Gross Axle Weight Rating . . Gross Vehicle Weight Rating. GVWR . . . . . . . . . . . . . . . . . .
688 INDEX Hood Release . . . . . . . . . . . . . . . . . . . . . . . . . . . .224 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Hook, Coat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292 iPod®/USB/MP3 Control Bluetooth® Streaming Audio . . . . . . . . . . . . . . .186 Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Jack Location . . . . . . . . . . . . . . . . . .
INDEX 689 Lane Change Assist . . . . . . . . . . . . . . . . . . . . . . . .232 Lap/Shoulder Belts. . . . . . . . . . . . . . . . . . . . . . . . .66 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224 Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . . .533 Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . .
690 INDEX Passing . . . . . . . . . . . . . . . . . . . . . . . . . . Reading . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Servicing . . . . . . . . . . . . . . . . . . . . . Rear Tail . . . . . . . . . . . . . . . . . . . . . . . . . Seat Belt Reminder . . . . . . . . . . . . . . . . . . Security Alarm . . . . . . . . . . . . . . . . . . . . . Service . . . . . . . . . . . . . . . . . . . . . . . . . . . Service Engine Soon (Malfunction Indicator) Side Marker . . . . . . . . . . . . . . . . .
INDEX 691 Exterior Folding . . . . . . . . . . . . . . . . . . . . . . . .138 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220 Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Rearview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Vanity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142 Mode Fuel Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . .
692 INDEX Outside Rearview Mirrors . . . . . . . . . . . . . . . . . . .136 Overhead Console. . . . . . . . . . . . . . . . . . . . . . . . .259 Overhead Travel Information Center . . . . . . . . . . . .259 Overheating, Engine . . . . . . . . . . . . . . . . . . . . . . .329 Owner’s Manual (Operator Manual) . . . . . . . . . . . . .4 Paint Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .637 Panic Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Parking Brake. . . . . . .
INDEX 693 Rear Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . .256 Rear Cross Path . . . . . . . . . . . . . . . . . . . . . . . . . .148 Rear Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . .443 Rear ParkSense System . . . . . . . . . . . . . . . . . . . . .248 Rearview Mirrors . . . . . . . . . . . . . . . . . . . . . . . . .136 Rear Window Features . . . . . . . . . . . . . . . . . . . . .301 Reclining Front Seats . . . . . . . . . . . . . . . . . . . . . . .
694 INDEX Satellite Radio Antenna . . . . . . . . . . . . . . . . . . . . .379 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . .662 Seat Belt Maintenance . . . . . . . . . . . . . . . . . . . . . .642 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . . . . .79 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Adjustable Shoulder Belt . . . . . . . . . . . . . . . . . . .71 Adjustable Upper Shoulder Anchorage . . . . . . . . .71 And Pregnant Women . . . .
INDEX 695 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Side Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 Signals, Turn . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 Sliding Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 SmartBeams . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233 Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . . .522 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
696 INDEX Temperature Control, Automatic (ATC) . Temperature Gauge, Engine Coolant . . . Tilt Steering Column . . . . . . . . . . . . . . Tire and Loading Information Placard . . TIREFIT . . . . . . . . . . . . . . . . . . . . . . . Tire Markings . . . . . . . . . . . . . . . . . . . Tires . . . . . . . . . . . . . . . . . . . . . . . . . Aging (Life of Tires) . . . . . . . . . . . . Air Pressure . . . . . . . . . . . . . . . . . . Chains . . . . . . . . . . . . . . . . . . . . . . Changing . . . . . . . .
INDEX 697 Recreational . . . . . . . . . . . . . . . . Weight . . . . . . . . . . . . . . . . . . . . Towing Assistance. . . . . . . . . . . . . . Towing Vehicle Behind a Motorhome Traction . . . . . . . . . . . . . . . . . . . . . Traction Control . . . . . . . . . . . . . . . Traction Control Switch . . . . . . . . . . Trailer Sway Control (TSC) . . . . . . . Trailer Towing . . . . . . . . . . . . . . . . Cooling System Tips . . . . . . . . . . Hitches . . . . . . . . . . . . . . . . . . .
698 INDEX . . . .360 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . . . . .507 . . . .356 Vehicle Modifications/Alterations . . . . . . . . . . . . . . .7 . . . .362 Vehicle Security Alarm Arming . . . . . . . . . . . . . . . .19 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . . . . .651 . . . .377 Viscosity, Engine Oil . . . . . . . . . . . . . . . . . . . . . . .616 . . . .365 Voice Command Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 . . . .
INDEX 699 Water Driving Through . . . . . . . . . . . . . . . . . . . . . . . .482 Wind Buffeting. . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . .456 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Rear Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Windshield Defroster. . . . . . . . . . . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2014 Town & Country 2014 OWNER’S MANUAL Chrysler Group LLC 14Y531-126-AD Fourth Edition Rev 1 Printed in U.S.A.
