2014 200 Convertible 2014 OWNER’S MANUAL Chrysler Group LLC 14C27-126-AA First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. Drunken driving is one of the most frequent causes of accidents. This manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .4 䡵 VEHICLE IDENTIFICATION NUMBER . . . . . . . .6 䡵 HOW TO USE THIS MANUAL . . . . . . . . . . . . . .4 䡵 VEHICLE MODIFICATIONS/ALTERATIONS . . . .7 䡵 WARNINGS AND CAUTIONS . . . . . . . . . . . . . .
4 INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained techCongratulations on selecting your new Chrysler Group nicians and genuine parts, and cares about your satisfacLLC vehicle. Be assured that it represents precision tion. workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A WORD ABOUT YOUR KEYS . . . . . . . . . . . . .12 ▫ To Disarm The System . . . . . . . . . . . . . . . . . . .20 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .12 䡵 ILLUMINATED ENTRY — IF EQUIPPED . . . . . .21 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .15 䡵 REMOTE KEYLESS ENTRY (RKE) . . . . . . . . . . .21 䡵 SENTRY KEY® . . . . . . . . . . . . . . . . . . . . . . . . .15 ▫ To Unlock The Doors. . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Battery Replacement . . . . . . . . . . . . . . . . . . . .27 䡵 OCCUPANT RESTRAINTS . . . . . . . . . . . . . . . .40 ▫ General Information . . . . . . . . . . . . . . . . . . . .28 ▫ Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . .44 䡵 REMOTE STARTING SYSTEM — IF EQUIPPED . .28 ▫ Lap/Shoulder Belt Untwisting Procedure . . . . .49 ▫ How To Use Remote Start . . . . . . . . . . . . . . . .29 ▫ Seat Belts In Passenger Seating Positions . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Supplemental Restraint System (SRS) — 䡵 SAFETY TIPS . . . . . . . . . . . . . . . . . . . . . . . Air Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 ▫ Transporting Passengers. . . . . . . . . . . . . . . ▫ Air Bag Deployment Sensors And Controls . . . .62 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . .69 ▫ Safety Checks You Should Make Inside The ▫ Child Restraints . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dealer for these numbers and keep them in a safe place. You can insert the double-sided keys into the locks with either side up. Vehicle Key Ignition Key Removal Place the shift lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: • If you try to remove the key before you place the shift lever into PARK, the key may become trapped temporarily in the ignition switch lock cylinder. If this occurs, place the shift lever in PARK, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to warn you that this safety feature is inoperable.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), the power window switches, radio, hands–free system (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time for this feature is programmable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 The system uses ignition keys which have an embedded electronic chip (transponder) to prevent unauthorized Opening the driver’s door when the key is in the ignition vehicle operation. Therefore, only keys that are prosounds a chime signal to remind you to remove the key. grammed to the vehicle can be used to start and operate NOTE: the vehicle.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE an invalid key to start the engine. Either of these condi- All of the keys provided with your new vehicle have tions will result in the engine being shut off after two been programmed to the vehicle electronics. seconds. Replacement Keys If the Vehicle Security Light turns on during normal NOTE: Only keys that have been programmed to the vehicle operation (vehicle running for longer than 10 vehicle electronics can be used to start the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 NOTE: When having the Sentry Key® Immobilizer 3. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position System serviced, bring all vehicle keys with you to an within 15 seconds. After ten seconds, a chime will authorized dealer. sound. In addition, the Vehicle Security Light will Customer Key Programming begin to flash.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Repeat this procedure to program up to eight keys. If you VEHICLE SECURITY ALARM — IF EQUIPPED do not have a programmed Sentry Key® contact your The Vehicle Security Alarm monitors the doors and trunk authorized dealer for details. for unauthorized entry and ignition switch for unauthorNOTE: If a programmed key is lost, see your authorized ized operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 horn after three minutes, turn off all of the visual signals 3. The Vehicle Security Light in the instrument cluster will flash for 16 seconds. This shows that the Vehicle after 15 minutes, and then the Vehicle Security Alarm will Security Alarm is arming. During this period, if a door rearm itself. is opened, the ignition switch is turned to ON/RUN, To Arm The System or the power door locks are unlocked in any manner, 1.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE of the previously described arming sequences has occurred, the Vehicle Security Alarm will arm regardless of Either press the UNLOCK button on the RKE transmitter whether you are in the vehicle or not. If you remain in the or insert a valid Sentry Key® into the ignition lock vehicle and open a door, the alarm will sound. If this cylinder and turn the key to the ON/START position. occurs, disarm the Vehicle Security Alarm.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 ILLUMINATED ENTRY — IF EQUIPPED NOTE: The courtesy lights will turn on when you press the • The front courtesy overhead console and door courunlock button on the Remote Keyless Entry (RKE) transtesy lights will turn on if the dimmer control is in the mitter or open any door. ⬙Dome ON⬙ position (extreme top position). This feature also turns on the approach lighting in the • The Illuminated Entry system will not operate if the outside mirrors (if equipped).
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • The line of transmission must not be blocked with metal objects when using the RKE transmitter. • Inserting the key into the ignition switch disables all buttons on the RKE transmitter. RKE Transmitter With Integrated Key To Unlock The Doors Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice to unlock both doors. The turn signal lights will flash to acknowledge the unlock signal.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Remote Key Unlock, Driver Door/All Doors First Press This feature lets you program the system to unlock either the driver’s door or both doors on the first press of the UNLOCK button on the RKE transmitter. To change the current setting, proceed as follows: 2. Release both buttons at the same time. 3.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transThe feature will cause the turn signal lights to flash when mitter with the ignition in the LOCK position and the the doors are locked or unlocked with the RKE transmitkey removed. ter. This feature can be turned on or turned off. To change the current setting, proceed as follows: 4. Repeat these steps if you want to return this feature to its previous setting.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 (Customer-Programmable Features)” in “Understand(EVIC). Refer to “Electronic Vehicle Information Center ing Your Instrument Panel” for further information. (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for • For vehicles not equipped with the EVIC, perform the further information. following steps: To Lock The Doors 1.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If there is no key in the ignition switch, pressing the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm System.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Battery Replacement The recommended replacement battery is CR2032. NOTE: 2 • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit board. 1. With the RKE transmitter buttons facing down, use a flat blade tool to pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, military base, and some This device complies with part 15 of FCC rules and with mobile or CB radios. RS-210 of Industry Canada. Operation is subject to the following conditions: REMOTE STARTING SYSTEM — IF EQUIPPED General Information 1. This device may not cause harmful interference.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 How To Use Remote Start • System not disabled from previous remote start event All of the following conditions must be met before the • Vehicle theft alarm not active engine will remote start: • Shift lever in PARK • Doors closed • Hood closed • Trunk closed • Hazard switch off • Brake switch inactive (brake pedal not pressed) • Ignition key removed from ignition switch • Battery at an acceptable charge level • RKE PANIC button not pressed WARNING! • Do not
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped To Enter Remote Start Mode The following messages will display in the EVIC if the vehicle fails to remote start or exits remote start prematurely: Press and release the REMOTE START button on the RKE transmitter twice within five seconds. The vehicle doors will lock, the parking lights will flash and the horn will chirp twice (if programmed).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 • If an engine fault is present the vehicle will start and NOTE: To avoid unintentional shut downs, the system will disable the one-time press of the remote start button then shut down 10 seconds later. for two seconds after receiving a valid remote start Remote start will also cancel if any of the following occur: request.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS Manual Door Locks To lock each door, push the door lock knob on each door trim panel downward. To unlock each door, pull the inside door handle. If the door lock knob is down when you shut the door, the door will lock. Make sure the keys are not inside the vehicle before closing the door. WARNING! • For personal security and safety in the event of an collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 WARNING! (Continued) • Do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. 2 Power Door Locks A door lock switch is located on the driver and passenger door trim panel. Press this switch to lock or unlock the doors. Power Door Lock Switch Automatic Door Locks — If Equipped The auto door lock feature default condition is enabled.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE auto door lock feature can be enabled or disabled by your Auto Unlock Door On Exit Programming authorized dealer. Please see your authorized dealer for The Automatic Unlock Doors On Exit feature can be service.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 4. A single chime will indicate the completion of the programming. NOTE: This feature will not be functional until the vehicle has been driven and the shift lever returned to the PARK position. 2 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Smart Glass Feature • If a fluttering noise is heard from the rear seat belts while driving with the windows down, safely bring the vehicle to a stop and buckle the rear seat belts over the empty seats. This will keep tension on the seat belts and remove the fluttering condition. The door window will lower slightly if the window is fully up when opening the door. The window will return to its full up position after closing the door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either door will cancel this feature. To reactivate the window Smart Glass Feature, perform the following steps after vehicle power is restored. 1. Lower all four windows to the full open position. 2.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE passenger door, press and release the window LOCK button (setting it in the down position). To enable the window control, press and release the window LOCK button again (setting it in the up position). Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with one window down in certain open or partially open positions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: The convertible top must be either closed and With the ignition switch in the ON/RUN position, the latched or open and latched to release the trunk. word “dECK” will display in the odometer indicating the trunk is open. The odometer display will reappear once the trunk is closed or if the trip button is pressed.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in the trunk, children can die from suffocation or heat stroke. Trunk Internal Emergency Release As a security measure, a Trunk Internal Emergency Release lever is built into the trunk latching mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 • Advanced Front Air Bags for driver and front passenger all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat • Supplemental Active Head Restraints (AHR) located on top of the front seats (integrated into the head Please pay close attention to the information in this restraint) — if equipped section.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the ride properly buckled up in the rear seat. Never allow risk of harm from a deploying air bag: children to slide the shoulder belt behind them or under their arm. 1. Children 12 years old and under should always ride If a child from 2 to 12 years old (not in a rear facing child buckled up in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 4. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between you and the door. 5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under ⴖIf You Need Assistanceⴖ. WARNING! • Relying on the air bags alone could lead to more severe injuries in a collision.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Buckle up even though you are an excellent driver, even lock and reduce the risk of you striking the inside of the on short trips. Someone on the road may be a poor driver vehicle or being thrown out. and cause a collision that includes you. This can happen far away from home or on your own street. WARNING! Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! (Continued) • Wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too. • Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Inserting Latch Plate Into Buckle WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is loose will not protect you properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. You are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together. 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap part of your seat belt as low as possible and keep it snug. • A twisted belt may not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 which are used to secure a child restraint system. For additional information, refer to “Installing Child ReUse the following procedure to untwist a twisted lap/ straints Using The Vehicle Seat Belt” under the “Child shoulder belt. Restraints” section. The chart below defines the type of 1. Position the latch plate as close as possible to the feature for each seating position. anchor point. Driver Center Passenger 2.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE to retract completely in this case and then carefully pull How To Engage The Automatic Locking Mode out only the amount of webbing necessary to comfort1. Buckle the combination lap and shoulder belt. ably wrap around the occupant’s mid-section. Slide the 2. Grasp the shoulder portion and pull downward until latch plate into the buckle until you hear a ⬙click.⬙ the entire belt is extracted. Automatic Locking Retractor Mode (ALR) — If Equipped 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 WARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in These head restraints are passive, deployable compocertain types of rear impacts. nents, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspec- NOTE: The Active Head Restraints (AHR) may or may tion of the head restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 CAUTION! All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. NOTE: For more information on properly adjusting and positioning the head restraint, refer to “Adjusting Active Head Restraints” in “Understanding The Features Of Your Vehicle”.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. Hand Positioning Points On AHR 2. Position the hands on the top of the deployed AHR at a comfortable position. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 2 AHR In Reset Position 3 — Final Downward Movement To Engage Locking Mechanism NOTE: 4. The AHR front soft foam and trim half should lock • If you have difficulties or problems resetting the Active into the back decorative plastic half. Head Restraints, see an authorized dealer.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For safety reasons, have the Active Head Restraints Light remains illuminated until the respective seat belts checked by a qualified specialist at an authorized are fastened. The driver should instruct all other occupants to fasten their seat belts. If a front seat belt is dealer. unbuckled while traveling at speeds greater than 5 mph Enhanced Seat Belt Use Reminder System (8 km/h), BeltAlert® will provide both audio and visual (BeltAlert®) notification.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 NOTE: Although BeltAlert® has been deactivated, the existing belt is not long enough. When it is not required, Seat Belt Reminder Light will continue to illuminate remove the extender, and store it. while the driver’s or front passenger (if equipped with BeltAlert®) seat belt remains unfastened. WARNING! Seat Belts And Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE instrument panel, above the glove compartment. The NOTE: These air bags are certified to the new Federal words SRS AIRBAG are embossed on the air bag covers. regulations for Advanced Air Bags. The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation that are based on several factors, including the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 protection for an occupant during a side impact. The • SABs are located in the outboard side of the front seats. • NOTE: • • Air Bag covers may not be obvious in the interior trim, • but they will open during air bag deployment. • • After any collision, the vehicle should be taken to an • authorized dealer immediately.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The first stage inflator is triggered immediately during an impact that requires air bag deployment. This low output is used in less severe collisions. A higher energy output is used for more severe collisions. WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 during a side impact. The SAB is marked with an air bag deploys independently; a left side impact deploys the left label sewn into the outboard side of the front seats. air bag only and a right-side impact deploys the right air bag only. NOTE: • Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • Being too close to the SAB during deployment could cause you to be severely injured or killed.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE properly, and use the appropriate sized child restraint, Along with seat belts and pretensioners, Advanced Front infant restraint or booster seat recommended for the size Air Bags work with the knee impact bolsters to provide improved protection for the driver and front passenger. and weight of the child.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 including the severity and type of collision. Advanced Seat belts are necessary for your protection in all colliFront Air Bags are not expected to reduce the risk of sions, and also are needed to help keep you in position, away from an inflating air bag. injury in rear, side, or rollover collisions.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE turns on the Air Bag Warning Light, either momentarily Driver And Passenger Advanced Front Air Bag or continuously. A single chime will sound if the light Inflator Units comes on again after initial startup.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 The Advanced Front Air Bag gas is vented through the could injure you if you are not seated properly, or if items vent holes in the sides of the air bag. In this way, the air are positioned in the area where the side air bag inflates. This especially applies to children. bags do not interfere with your control of the vehicle.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Turn on the interior lights, which remain on as long as • The nylon air bag material may sometimes cause abrasions and/or skin reddening to the driver and the battery has power or until the ignition key is front passenger as the air bags deploy and unfold. The removed. abrasions are similar to friction rope burns or those • Unlock the doors automatically. you might get sliding along a carpet or gymnasium floor. They are not caused by contact with chemicals.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 continues, see your doctor. If these particles settle on Maintaining Your Air Bag System your clothing, follow the garment manufacturer’s instructions for cleaning. WARNING! Do not drive your vehicle after the air bags have deployed. If you are involved in another collision, the air bags will not be in place to protect you. WARNING! Deployed air bags and seat belt pretensioners cannot protect you in another collision.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, including your trim cover and cushion, needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. Child Restraints enough for an adult safety belt. Always check the child seat Owner’s Manual to make sure you have the correct seat for your child.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 WARNING! In a collision, an unrestrained child can become a projectile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the child’s size.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Size, Height, Weight or Age Small Children Larger Children Children Too Large for Child Restraints Children who are at least two years old or who have out-grown the height or weight limit of their rear-facing child restraint Children who have out-grown their forward-facing child restraint, but are too small to properly fit the vehicle’s seat belt Children 12 years old or younger, who have out-grown the height or weight limit of their booster seat Rec
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 The infant carrier is only used rearward-facing in the WARNING! vehicle. It is recommended for children from birth until they reach the weight or height limit of the infant carrier. • Never place a rear facing infant seat in front of an Convertible child seats can be used either rearwardair bag. A deploying passenger Advanced Front Air facing or forward-facing in the vehicle.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Children Too Large For Booster Seats 3. Does the shoulder belt cross the child’s shoulder between their neck and arm? Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend 4. Is the lap part of the belt as low as possible, touching over the front of the seat when their back is against the the child’s thighs and not their stomach? seatback, should use the seat belt in a rear seat. Use this 5.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Child + Child Restraint Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child Restraint Forward-Facing Child Restraint Up to 65 lbs (29.5 kg) More than 65 lbs (29.5 kg) Up to 65 lbs (29.5 kg) More than 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Lower Anchors and Tethers for Children (LATCH) Restraint System Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 LATCH Positions For Installing Child Restraints What is the weight limit (child’s weight + weight of the child restraint) for using the LATCH anchorage system to attach the child restraint? 65 lbs (29.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage symbols on the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along gap between the seatback and seat cushion.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 tether anchors are underneath access covers in the carpet covering the back of the seat where you see the tether anchorage symbol. 2 Child Tether Anchor Child Tether Access Port Cover A — Cover B — Tether Strap Hook C — Attaching Strap D — Tether Anchor LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE anchorage and a way to tighten the connection to the To Install A LATCH-compatible Child Restraint anchorage. Forward-facing child restraints and some 1. If the selected seating position has a Switchable Autorear-facing infant restraints will also be equipped with a matic Locking Retractor (ALR) seat belt, stow the seat tether strap. The tether strap will have a hook at the end belt, following the instructions below.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 4. Attach the lower hooks or connectors of the child How To Stow An Unused ALR Seatbelt restraint to the lower anchorages in the selected seat- When using the LATCH attaching system to install a ing position. child restraint, stow all ALR seat belts that are not being 5. If the child restraint has a tether strap, connect it to the used by other occupants or being used to secure child top tether anchorage. See the section “Installing Child restraints.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the seat belt tight around the child restraint so that it is not necessary to use a locking clip. The ALR retractor can Improper installation of a child restraint to the be “switched” into a locked mode by pulling all of the LATCH anchorages can lead to failure of the re- webbing out of the retractor and then letting the webbing straint. The child could be badly injured or killed. retract back into the retractor.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle 2
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the Tether Anchor with the seat belt to attach a forward facing child restraint? 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 5. To lock the seat belt, pull down on the shoulder part of the belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing to retract Place the child seat in the center of the seating back into the retractor. As the webbing retracts, you position. For some second row seats, you may need to will hear a clicking sound.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. If the child restraint has a top tether strap and the Installing A Child Restraint With A Cinching seating position has a top tether anchorage, connect Latch Plate (CINCH) — If Equipped the tether strap to the anchorage and tighten the tether 1. Place the child seat in the center of the seating strap. Refer to “Lower Anchors and Tethers for Chilposition.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 5. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “Installing Child Restraints Using The Top Tether Anchorage” for directions to attach a tether anchor. facing out, away from the child restraint. Repeat steps 4 to 6, above, to complete the installation of the child restraint.
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Push the tether strap and hook (B) through the access 4. Open the access cover (C) on the carpet covering the port and down into the trunk. Route the tether strap to back of the seat and attach the tether strap hook (D) to provide the most direct path from the child seat to the the anchor. anchor. Child Tether Anchor Child Tether Access Port Cover 5. Remove slack in the tether strap according to the child restraint manufacturer’s instructions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Air Bags deploying in the front seat could harm your pet. Wide-open throttle acceleration in low gear can be detriAn unrestrained pet will be thrown about and possibly mental and should be avoided. injured, or injure a passenger during panic braking or in a collision.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of difficulty. SAFETY TIPS Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 WARNING! (Continued) eventually poison you. To avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area. • If you are required to drive with the trunk/liftgate/ rear doors open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recirculation mode.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.). If there is any question regarding belt or retractor condition, replace the belt. feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 WARNING! (Continued) WARNING! (Continued) • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle. • Never put floor mats or other floor coverings on top of already installed floor mats. Additional floor mats and other coverings will reduce the size of the pedal area and interfere with the pedals.
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE lodged in the tread or sidewall. Inspect the tread for cuts Door Latches and cracks. Inspect sidewalls for cuts, cracks and bulges. Check for positive closing, latching, and locking. Check the wheel nuts for tightness. Check the tires Fluid Leaks (including spare) for proper cold inflation pressure. Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 CONVERTIBLE TOP OPERATION . . . . . . . . . .101 ▫ Power Convertible Top Usage Precautions . . . .102 ▫ Cargo Shield . . . . . . . . . . . . . . . . . . . . . . . . .106 ▫ Power Convertible Top Controls . . . . . . . . . . .108 ▫ Lowering the Power Convertible Top. . . . . . . .109 ▫ Raising The Power Convertible Top . . . . . . . . .110 ▫ Wind Stop — If Equipped . . . . . . . . . . . . . . .111 ▫ Power Convertible Top Operation And Warning Messages . .
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Uconnect® Phone — IF EQUIPPED . . . . . . . . . .128 䡵 SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .131 ▫ Power Seats . . . . . . . . . . . . . . . . . . . . . . . . .166 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . . .138 ▫ Heated Seats — If Equipped . . . . . . . . . . . . .167 ▫ Uconnect® Phone Features . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 ▫ Headlights And Parking Lights . . . . . . . . . . . .178 ▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . .183 ▫ Automatic Headlights — If Equipped . . . . . . .178 ▫ Battery Saver Feature . . . . . . . . . . . . . . . . . .184 ▫ Headlights With Wipers (Available With 䡵 WINDSHIELD WIPERS AND WASHERS . . . . . .184 Automatic Headlights Only) . . . . . . . . . . . . .179 ▫ Intermittent Wiper System . . . . . . . . . . . . . . .
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . .191 䡵 CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . ▫ To Vary The Speed Setting . . . . . . . . . . . . . . .191 䡵 CUPHOLDERS . . . . . . . . . . . . . . . . . . . . . . ▫ To Accelerate For Passing . . . . . . . . . . . . . . . .191 ▫ Front Seat Cupholder . . . . . . . . . . . . . . . . . 䡵 GARAGE DOOR OPENER — IF EQUIPPED . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 CONVERTIBLE TOP OPERATION CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: • Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force water past the weather strips. • Remove any standing water from the top and dry the surface before opening it.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When operating the power convertible top, the trunk lid will pivot at the rear of the vehicle, swing open by the rear window, and then pivot backward. This allows room for the top to retract into or unfold from its stowage area in the trunk. Spring-loaded flipper doors, which provide clearance for the linkage, close off notches in the quarter trim panels when the top is down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 micro-switches verify that operations are complete before allowing the next stage of lowering or raising operation. • Opening and closing the top consecutively without the engine running may run the battery down. • If a fluttering noise is heard from the rear seat belts while driving with the top down, safely bring the vehicle to a stop and buckle the rear seat belts over the empty seats.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! CAUTION! (Continued) Before operating the power top: • Always check on top of the tonneau cover area to be sure that it is clear of debris or other items. • Make sure the ambient temperature is above 0°F (-18°C). • Never attempt to lower a frozen convertible top. Wait until the top is thawed before lowering it into the stowage compartment. Lowering a cloth top at temperatures below 32°F (0°C) should be avoided.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 CAUTION! (Continued) CAUTION! (Continued) • Do not allow the top to remain in the suspended position. After approximately 10 minutes in the suspended position, the hydraulic pressure will release, which will allow the top and the trunk lid to lower. Pressing the power top switch will cancel this operation. • Always use a normal ice scraper to remove snow or ice from the rear window.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Before operating the power top, make sure that no moving parts of the convertible top can injure a person or animal. • Never place any extremities (hands, feet, etc.) near the convertible top components, the upper windshield area, the shelf area behind the rear seats, or the convertible top stowage area while raising or lowering the convertible top.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Positioning The Cargo Shield For Top Operation Pull the cargo shield toward you to begin unfolding the panels. Grasp the handle in the center of the outermost (top) panel and raise the cargo shield. Then, align and seat the tabs at each end of the cargo shield in the V slots in the trunk liner as shown in the illustration. 3 CAUTION! Do not place items on top of the cargo shield.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE in the trunk trim. Continue folding the upright panel Power Convertible Top Controls forward onto the horizontal panel, then grasp both The power top switch is located on the front of the center panels and lift them to the forward, upright position in console. the trunk. There is also a power top button on the Remote Keyless Entry (RKE) transmitter for remotely lowering the power convertible top.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Lowering the Power Convertible Top Using The Power Top Switch obstruction and the driver is alerted, the convertible top operation can be stopped by releasing the switch. Using The Remote Keyless Entry Transmitter NOTE: The power top switch will operate when the ignition switch is turned to the ON or ACC position and NOTE: Steps 1 – 3 must be performed within five seconds. when in the power accessory delay. 1.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Raising The Power Convertible Top Manually Closing the power convertible top manually is a complicated and physically demanding procedure, and it reNOTE: The power top switch will operate when the quires a special tool to do so. In the event that you ignition switch is turned to the ON or ACC position and experience a malfunction when operating the power when in the power accessory delay. convertible top: Using The Power Top Switch 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 3. Lay the small frame (1) flat on top of the large frame (2) and snap the two frames together by engaging the The Wind Stop installs in the backseat area of the vehicle. frame lock (3). The Wind Stop will not interfere with power top operation. Therefore, it can remain installed when the top is up. NOTE: The frames must lie flat on each other in order to However, when not in use, the Wind Stop folds to allow snap them together.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Pivot the small frame (1) away from the large frame (2) 5. Unfold both stems at the rear of the large frame. until the pivot lock (3) engages to lock the two frames in an L shape.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 6. Align and insert the stems into the slot in each trim panel. 7. Align the pins at the front of the large frame with the hole in each trim panel. Slide the pins outward until fully extended into each hole.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Removing And Storing The Wind Stop Power Convertible Top Operation And Warning Reverse the installation procedure to remove, fold, and Messages store the Wind Stop.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 EVIC Message⽧ CONVERTIBLE TOP NOT SECURED CONVERTIBLE TOP COMPLETE EVIC Message Display Time⽧ Until Operation is Complete Odometer Message (< 5 mph [8 km/h])⽧⽧ TOP nOT SECUrE Odometer Odometer Message Message Display (> 5 mph Time⽧⽧ [8 km/h])⽧⽧ Until Op- — eration is Complete Odometer Message Display Time⽧⽧ — Chime Condition Operator Action Required — — 9 sec. TOP DONE Display Scrolls for 6 sec.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC Message⽧ SECURE CARGO SHIELD EVIC Message Display Time⽧ 9 sec. Odometer Message (< 5 mph [8 km/h])⽧⽧ SET CARGO SHIELD Odometer Odometer Message Message Display (> 5 mph Time⽧⽧ [8 km/h])⽧⽧ Display — Scrolls for 9 sec.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 EVIC Message⽧ CONVERTIBLE TOP NOT SECURED EVIC Message Display Time⽧ Until Operation is Complete Odometer Message (< 5 mph [8 km/h])⽧⽧ TOP nOT SECUrE Odometer Odometer Message Message Display (> 5 mph Time⽧⽧ [8 km/h])⽧⽧ Until Op- TOP nOT eration is SECUrE Complete Odometer Message Display Time⽧⽧ Until Operation is Complete Chime Condition Operator Action Required Single Chime The System Fails to Complete Operation of Lowering or Raising the Top Cycl
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC Message⽧ SPEED TOO HIGH EVIC Message Display Time⽧ 9 sec. Odometer Message (< 5 mph [8 km/h])⽧⽧ SPEED TOO HIGH Odometer Odometer Message Message Display (> 5 mph Time⽧⽧ [8 km/h])⽧⽧ Display TOP Scrolls for 9 sec. Odometer Message Display Time⽧⽧ 6 sec. Chime Condition Operator Action Required Single Chime You Are Operating the Power Top at a Vehicle Speed Greater Than 0 mph (0 km/h) The Top Will Not Operate Unless the Vehicle is Stationary.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 EVIC Message⽧ TRUNK AJAR EVIC Message Display Time⽧ Continuous Odometer Message (< 5 mph [8 km/h])⽧⽧ DECK Odometer Odometer Message Message Display (> 5 mph Time⽧⽧ [8 km/h])⽧⽧ ContinuDECK ous Odometer Message Display Time⽧⽧ Continuous Chime Condition Operator Action Required Single Chime The Trunk Lid is Unlatched or Open The Top Will Not Operate Unless the Trunk Lid is Closed 3
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC Message⽧ CONVERTIBLE TOP MALFUNCTION EVIC Message Display Time⽧ 6 sec. Odometer Message (< 5 mph [8 km/h])⽧⽧ TOP FAIL Odometer Odometer Message Message Display (> 5 mph Time⽧⽧ [8 km/h])⽧⽧ Display TOP Scrolls for 6 Seconds Odometer Message Display Time⽧⽧ 6 sec.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 EVIC Message⽧ CONVERTIBLE TOP MALFUNCTION EVIC Message Display Time⽧ Until Fault is No Longer Detected or Repaired Odometer Message (< 5 mph [8 km/h])⽧⽧ TOP FAIL Odometer Odometer Message Message Display (> 5 mph Time⽧⽧ [8 km/h])⽧⽧ Display TOP Scrolls until Fault is No Longer Detected or Repaired Odometer Message Display Time⽧⽧ Display Flashes until Fault is No Longer Detected or Repaired Chime Condition Operator Action Required Single Chime The PTCM
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If you are trying to lower the top and ambient temperature is 0°F (-18°C) or lower, wait until the temperature rises and the top is thawed and dry before operating the power top. A soft top should not be lowered at temperatures below 32°F (0°C). • If you are trying to raise the top and ambient temperature is below -40°F (-40°C), wait until the temperature rises before operating the power top.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Emergency Bypass Mode (To Raise The Top Only) This procedure is only to be used to raise the top when the top cannot be returned to the UP (raised) position by pressing the POWER TOP switch or is in a position in which the vehicle cannot be driven. Please follow these emergency bypass instructions to return the top to the UP (raised) position. CAUTION! (Continued) • DO NOT exceed 40 mph (64 km/h).
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. 3 NOTE: This feature is disabled when the vehicle is moving in reverse.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When finished, return the knob to the center “O” (Off) The power mirror control is located on the driver’s door position to guard against accidentally moving a mirror position. trim. Power Mirrors Power Mirror Control To adjust a mirror, turn the control toward the left or right mirror positions indicated. Tilt the control in the direction you want the mirror to move.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Adjusting Side View Mirrors WARNING! (Continued) Outside Mirror — Driver Side Adjust the outside mirror to center on the adjacent lane of traffic, with a slight overlap of the view obtained on the inside mirror. Outside Mirror — Passenger Side collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror. Some vehicles will not have a convex passenger side mirror.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE not be equipped with rear window defroster, in this case the heated mirrors will still function as intended. Refer to “Rear Window Features” in “Understanding The Features Of Your Vehicle” for further information. Vanity Mirror — If Equipped A vanity mirror is attached to the inside face of the sun visor. To use the mirror, rotate the sun visor downward and flip the mirror cover upward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 mobile phone’s audio is transmitted through your vehi- The Uconnect® Phone is driven through your cle’s audio system; the system will automatically mute Bluetooth® “Hands-Free Profile” mobile phone. your radio when using the Uconnect® Phone.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) laws, including laws regarding phone use. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. Voice Command Button Actual button location may vary with the radio. The individual buttons are described in the “Operation” section. The Uconnect® Phone can be used with any Hands-Free Profile certified Bluetooth® mobile phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Operation Voice commands can be used to operate the Uconnect® Phone and to navigate through the Uconnect® Phone menu structure. Voice commands are required after most Uconnect® Phone prompts. You will be prompted for a specific command and then guided through the available options. • Prior to giving a voice command, one must wait for the beep, which follows the “Ready” prompt or another prompt.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The If you need assistance at any prompt, or if you want to Uconnect® website may also provide detailed instrucknow your options at any prompt, say “Help” following tions for pairing. the beep. The Uconnect® Phone will play some of the options at any prompt if you ask for help.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • For identification purposes, you will be prompted to Dial By Saying A Number give the Uconnect® Phone a name for your mobile • Press the button to begin. phone. Each mobile phone that is paired should be • After the “Ready” prompt and the following beep, say given a unique phone name. “Dial.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system will prompt you to say the name of the phonebook. Specific Bluetooth® Phones with Phone Book Access Profile may support this feature. See person you want to call. Uconnect® website for supported phones. • After the “Ready” prompt and the following beep, say the name of the person you want to call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 downloaded names can be used. Until then, if avail- • After the “Ready” prompt and the following beep, say “Phonebook New Entry.” able, the previously downloaded phonebook is available for use. • When prompted, say the name of the new entry. Use of long names helps the Voice Command and it is recom• Only the phonebook of the currently connected mobile mended. For example, say “Robert Smith” or “Robert” phone is accessible. instead of “Bob.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Uconnect® Phone will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations. Each language has a separate 32-name phonebook accessible only in that language. In addition, if equipped and supported by your phone, Uconnect® Phone automatically downloads your mobile phone’s phonebook.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 • Press the button to begin. • Note that only the phonebook entry in the current language is deleted. • After the “Ready” prompt and the following beep, say • Automatic downloaded phonebook entries cannot be “Phonebook Delete.” deleted or edited. • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish Delete/Erase “All” Uconnect® Phonebook Entries to delete.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Automatic downloaded phonebook entries cannot be • The selected number will be dialed. deleted or edited. Phone Call Features List All Names In The Uconnect® Phonebook The following features can be accessed through the Uconnect® Phone if the feature(s) are available on your • Press the button to begin. mobile service plan.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Answer Or Reject An Incoming Call — Call Currently In Progress in progress. To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer to “Conference Call” in this section.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE active call is terminated by the phone far end, a call on hold may not become active automatically. This is cell When two calls are in progress (one active and one on phone-dependent. To bring the call back from hold, press button until you hear a hold), press and hold the and hold the button until you hear a single beep. double beep indicating that the two calls have been joined into one conference call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 switched to OFF. Call continuation functionality avail- Uconnect® Phone Features able on the vehicle can be any one of three types: Language Selection • After the ignition is switched to OFF, a call can To change the language that the Uconnect® Phone is continue on the Uconnect® Phone either until the call using: ends, or until the vehicle battery condition dictates button to begin.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Assistance NOTE: If you are in an emergency and the mobile phone is • The emergency number dialed is based on the country reachable: where the vehicle is purchased (911 for the U.S. and Canada and 060 for Mexico). The number dialed may • Pick up the phone and manually dial the emergency not be applicable with the available mobile service and number for your area. area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 WARNING! To use you Uconnect® Phone System in an emergency, your mobile phone must be: • turned on, • paired to the Uconnect® System, • and have network coverage. Roadside Assistance / Towing Assistance NOTE: You should program the desired Towing Assistance phone number using the Voice Command system. To do this, press the button and say “Setup,” followed by “Towing Assistance.” When prompted say 1-800-5282069 for the U.S.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE “Send,” is also to be used for navigating through an automated customer service center menu structure, and This method is used in instances where one generally has to leave a number on a pager. to press numbers on the mobile phone keypad while navigating through an automated telephone system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 • Some paging and voice mail systems have system time • After the “Ready” prompt and the following beep, say one of the following: out settings that are too short and may not allow the use of this feature. – “Setup Confirmation Prompts On” Barge In — Overriding Prompts – “Setup Confirmation Prompts Off” The “Voice Command” button can be used when you wish to skip part of a prompt and issue your voice command immediately.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE dialing a number with your paired Bluetooth® mobile In order to un-mute the Uconnect® Phone: phone, the audio will be played through your vehicle’s • Press the button. audio system. The Uconnect® Phone will work the same • Following the beep, say “Mute off.” as if you dial the number using Voice Command. NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect® Phone to play it on the vehicle audio system, so you will not hear it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 If you would like to connect or disconnect the Bluetooth® Select Another Mobile Phone connection between your mobile phone and the This feature allows you to select and start using another Uconnect® Phone System, follow the instructions de- phone paired with the Uconnect® Phone. scribed in your mobile phone User’s Manual. button to begin.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say Phone Voice Training feature may be used. To enter this training mode, follow one of the two following proce“Setup Phone Pairing.” dures: • At the next prompt, say “Delete” and follow the From outside the Uconnect® Phone mode (e.g., from prompts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 This procedure may be repeated with a new user. The • Speak normally without pausing, just as you would speak to a person sitting a few feet/meters away from system will adapt to the last trained voice only. you. Reset • Make sure that no one other than you is speaking • Press the button. during a Voice Command period. • After the “Ready” prompt, and the following beep, say • Performance is maximized under: “Setup,” then “Reset.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When navigating through an automated system such • In a convertible vehicle, system performance may be as voice mail, or when sending a page, at the end of compromised with the convertible top down. speaking the digit string, make sure to say “Send.” Far End Audio Performance • Storing names in the phonebook when the vehicle is • Audio quality is maximized under: not in motion is recommended.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 • In a convertible vehicle, system performance may be • After the “Ready” prompt and the following beep, say “SMS Read” or “Read Messages.” compromised with the convertible top down. Recent Calls • Uconnect® Phone will play the new text message for you. If your phone supports “Automatic Phonebook Download,” Uconnect® Phone can list your Outgoing, Incom- After reading a message, you can “Reply” or “Forward” ing and Missed Calls.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE button while the 9. Call me later To send a message, press the system is listing the message and say “Send.” 10. Thanks Uconnect® Phone will prompt you to say the name or 11. See You in 15 minutes number of the person you wish to send the message to. 12. I am on my way List of Preset Messages: 13. I’ll be late 1. Yes 14. Are you there yet? 2. No 15. Where are we meeting? 3. Where are you? 16. Can this wait? 4. I need more direction. 17. Bye for now 5.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Turn Voice Text Reply Incoming Announcement ON/ Bluetooth® Communication Link OFF Mobile phones have been found to lose connection to the Turning the Voice Text Reply Incoming Announcement Uconnect® Phone. When this happens, the connection OFF will stop the system from announcing the new can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in incoming messages. Bluetooth® ON mode. button.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 3
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Voice Commands Primary Alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location Voice Commands Primary Alternate (s) all call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais 3
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Primary Alternate (s) help home language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book Voice Commands Primary Alternate (s) previous record again redial return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect® Tutorial voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 General Information VOICE COMMAND — IF EQUIPPED This device complies with Part 15 of the FCC rules and Voice Command System Operation RSS 210 of Industry Canada.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) laws. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. will be interrupted, and after the beep, you can add or change commands. This will become helpful once you start to learn the options. NOTE: At any time, you can say the words “Cancel,” “Help” or “Main Menu.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Commands Main Menu The Voice Command system understands two types of Start a dialogue by pressing the Voice Command button. You may say “Main Menu” to switch to the commands. Universal commands are available at all times. Local commands are available if the supported main menu. radio mode is active. In this mode, you can say the following commands: Changing the Volume • “Radio AM” (to switch to the radio AM mode) 1.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Radio AM • “Menu Radio” (to switch to the radio menu) To switch to the AM band, say “AM” or “Radio AM.” In • “Main Menu” (to switch to the main menu) this mode, you may say the following commands: Satellite Radio • “Frequency #” (to change the frequency) To switch to satellite radio mode, say “Sat” or “Satellite Radio.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Disc Mode Bluetooth® Streaming (BT) Mode To switch to the disc mode, say “Disc.” In this mode, you To switch to Bluetooth® Streaming (BT) mode, say may say the following commands: “Bluetooth Streaming.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE – “Delete” (to delete the recording) • “Main menu setup” or • “Play Memos” (to play previously recorded memos) — During the playback you may press the Voice Combutton to stop playing memos.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect® vehicle. Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. 2.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seats WARNING! The power seat switch is on the outboard side of the seat near the floor. Use the switch to move the seat up, down, forward, rearward, or to tilt the seat. • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Adjusting The Seat Forward Or Rearward Heated Seats — If Equipped The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. On some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE minutes of continuous operation. If LOW-level heating is selected, the system automatically turns the heater and the indicator light OFF after a maximum of 30 minutes of continuous operation. NOTE: Once a heat setting is selected, heat will be felt within two to five minutes.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Recliner Adjustment The recliner control is on the outboard side of the seat. To recline the seat, lean forward slightly and lift the lever. Then lean back to the position desired and release the lever. To return the seatback to its normal upright position, lean forward and lift the lever. Release the lever once the seatback is in the upright position.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 When returning the seat to its normal position, the memory feature restores the seat position and seatback The Easy Entry lever is located on upper seat belt anchor recline position to their current settings. cover. On the driver seat, pull the lever upward to move the seatback forward. Easy Entry System When returning the seatback to its normal position the memory feature restores the seatback recline position to its current setting.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 3 Push Button For comfort the Active Head Restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Active Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Restraint during sudden stops. Failure to follow this warning could cause personal injury if the Active Head Restraint is deployed.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Move to the outside of the vehicle and lift the secondary latch underneath the center front edge of the hood and raise the hood. Hood Prop Rod Before closing the hood, make sure to stow the prop rod in its proper location. Hood Safety Latch Location Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. passing light, fog lights, instrument panel light dimming and turn signals. The multifunction lever is located on the left side of the steering column. 3 WARNING! Be sure the hood is fully latched before driving your vehicle.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights And Parking Lights Automatic Headlights — If Equipped Turn the end of the multifunction lever to the first detent Turning the end of the multifunction lever to the third for parking light operation. Turn to the second detent for detent (AUTO), will activate the automatic headlight headlight operation. system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 With the engine running and the multifunction lever in Headlight Time Delay the AUTO position, the headlights will turn on and turn There is also a feature that delays turning off the vehicle off based on the surrounding light levels. lights for 30, 60 or 90 seconds after the ignition switch is Headlights With Wipers (Available With Automatic turned OFF.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If either light remains on and does not flash, or Move the multifunction lever up or down and the arrows there is a very fast flash rate, check for a defective outside on each side of the instrument cluster flash to show light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is proper operation of the front and rear turn signal lights. defective.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beam headlights until the lever is released. 3 NOTE: If the multifunction lever is held in the flash-topass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds for the next flash-to-pass operation.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the center portion of the lever upward to the next detent position to brighten the odometer and radio when The front turn signal lamps will turn on as Daytime the parking lights or headlights are on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Interior Lights Two courtesy/reading lights are located in the bottom of the rearview mirror. You can turn these lights on and off from the switches in the mirror or from the dimmer control in the multifunction lever. These lights are also controlled automatically by the Illuminated Entry System. 3 Courtesy/Reading Light Switches A courtesy light is also found in the rear of the center console.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Battery Saver Feature To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open. WINDSHIELD WIPERS AND WASHERS The wipers and washers are operated by a switch on the control lever. The lever is located on the right side of the steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE regulate the wipe interval from a minimum of one cycle Windshield Washers every second to a maximum of approximately 18 seconds To use the washer, pull the windshield wiper/washer between cycles. control lever toward you and hold it for as long as washer spray is desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 WARNING! (Continued) the windshield during freezing weather, warm the windshield with defroster before and during windshield washer use. Mist Feature Push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE column) is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature. The headlights with wipers feature can be turned on or off through the Electronic Vehicle Information Center (EVIC) — if equipped. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerProgrammable Features)” in “Understanding Your Instrument Panel” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 column in position, pull the lever upward until fully engaged. WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. To Activate Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time. The Cruise Indicator Light will turn off. The system should be turned off when not in use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 decrease until the button is released. Release the button when the desired speed is reached, and the new set speed To resume a previously set speed, push the RES (+) will be established. button and release. Resume can be used at any speed Pressing the SET (-) button once will result in a 1 mph above 20 mph (32 km/h). (1.6 km/h) decrease in set speed. Each subsequent tap of To Vary The Speed Setting the button results in a decrease of 1 mph (1.6 km/h).
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so The HomeLink® buttons, located on either the overhead it may be preferable to drive without Electronic Speed console, headliner or sunvisor, designate the three different HomeLink® channels. The HomeLink® indicator is Control. located above the center button. WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink® system. Erase all channels before you begin programming. To erase the channels place the ignition in the ON/RUN position and press and hold the two outside HomeLink® buttons (I and III) for up 20 seconds or until the red indicator flashes.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming A Rolling Code For programming garage door openers that were manufactured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is attached to the garage door opener. It is NOT the button that is normally used to open and close the door. The name and color of the button may vary by manufacturer. Training The Garage Door Opener 1 — Door Opener 2 — Training Button 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) 5. At the garage door opener motor (in the garage), away from the HomeLink® button you wish to prolocate the “LEARN” or “TRAINING” button. This can usually be found where the hanging antenna wire is gram while keeping the HomeLink® indicator light in attached to the garage door opener/device motor. view. Firmly press and release the “LEARN” or “TRAIN3.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To program the remaining two HomeLink® buttons, Programming A Non-Rolling Code repeat each step for each remaining button. DO NOT For programming Garage Door Openers manufactured erase the channels. before 1995. Reprogramming A Single HomeLink® Button 1. Turn the ignition switch to the ON/RUN position. To reprogram a channel that has been previously trained, 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 5. Press and hold the programmed HomeLink® button and observe the indicator light. • If the indicator light stays on constantly, programming is complete and the garage door/device should activate when the HomeLink® button is pressed. • To program the two remaining HomeLink® buttons, repeat each step for each remaining button. DO NOT erase the channels. 3.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. • If the indicator light stays on constantly, programming is complete and the garage door/device should activate when the HomeLink® button is pressed. • To program the two remaining HomeLink® buttons, repeat each step for each remaining button. DO NOT erase the channels. 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 3. Without releasing the button proceed with The HomeLink® Universal Transceiver is disabled when “Canadian/Gate Operator Programming” Step 2 and the Vehicle Security Alarm is active. follow all remaining steps. Troubleshooting Tips Using HomeLink® If you are having trouble programming HomeLink®, To operate, press and release the programmed here are some of the most common solutions: HomeLink® button.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 • The term IC before the certification/registration number only signifies that Industry Canada technical specifications were met. ELECTRICAL POWER OUTLETS 3 There are two 12 Volt (13 Amp) electrical power outlets on this vehicle. Both of the power outlets are protected by a fuse. The instrument panel power outlet, located below the climate control knobs, has power available only when the ignition is ON.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE A second power outlet is located inside the center con- NOTE: To ensure proper operation a MOPAR® knob sole. and element must be used. CAUTION! Center Console Power Outlet The center console power outlet is powered directly from the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting. • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 3 Front Cupholders Rear Seat Cupholders Cupholders for the rear seat occupants are located in the armrests. Each cupholder is capable of holding up to a 20 oz. (.5 L) bottle or can. Rear Cupholders WARNING! If containers of hot liquid are place in the cupholder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury.
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Glovebox Storage Compartment The glovebox storage compartment is located on the right side of the instrument panel. To open the glovebox, pull outward on the latch handle located on the front of the glovebox. Glovebox Storage Compartment CONSOLE FEATURES Storage The center console is located between the front driver and passenger seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 comfort. The center console can be used for storage and is also equipped with an electrical power outlet. Refer to “Power Outlets” in “Understanding The Feature of Your Vehicle” for further information. 3 Center Console Storage The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also contains a 12 Volt power outlet.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: CARGO AREA FEATURES • A notch in the front of the console base allows for use The 60/40 split-folding rear seat provides cargo-carrying of a cellular phone while it is plugged into the power versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When outlet with the armrest latched down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 WARNING! (Continued) • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion. They could be seriously injured in a collision. Children should be seated and using the proper restraint system. • To help protect against personal injury, passengers should not be seated in the rear cargo area.
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ski Pass-Through REAR WINDOW FEATURES There is a ski pass-through door located behind the rear Rear Window Defroster seat armrest that allows longer items, such as snow skis, to be stored in the rear cargo area. Lower the armrest and The rear window defroster button is located on pull downward on the latch to open the ski pass-through the climate control (Mode) knob. Press this button door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 INSTRUMENT PANEL FEATURES . . . . . . . . . .216 ▫ EVIC Main Menu . . . . . . . . . . . . . . . . . . . . .239 䡵 INSTRUMENT CLUSTER . . . . . . . . . . . . . . . . .217 ▫ Compass Display . . . . . . . . . . . . . . . . . . . . .239 䡵 INSTRUMENT CLUSTER DESCRIPTIONS . . . . .218 ▫ Average Fuel Economy. . . . . . . . . . . . . . . . . .242 䡵 MINI-TRIP COMPUTER — IF EQUIPPED . . . . .233 ▫ Distance To Empty (DTE) . . . . . . . . . . . . . . . .
214 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 SETTING THE ANALOG CLOCK . . . . . . . . . . .247 䡵 Uconnect® 130 WITH SATELLITE RADIO . . . . .257 䡵 Uconnect® 730N/430/430N CD/DVD/HDD/NAV — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . .247 ▫ Operating Instructions (Voice Command System) — If Equipped . . . . . . . . . . . . . . . . . . . . . . .247 ▫ Operating Instructions (Uconnect® Phone) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .247 䡵 Uconnect® 130 . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 215 ▫ Controlling The iPod® Or External USB Device 䡵 CD/DVD DISC MAINTENANCE . . . . . . . . . Using Radio Buttons . . . . . . . . . . . . . . . . . . .275 䡵 RADIO OPERATION AND MOBILE PHONES ▫ Play Mode . . . . . . . . . . . . . . . . . . . . . . . . . .275 䡵 CLIMATE CONTROLS . . . . . . . . . . . . . . . . . ▫ List Or Browse Mode . . . . . . . . . . . . . . . . . . .277 ▫ Manual Heating And Air Conditioning . . . . ▫ Bluetooth Streaming Audio (BTSA) . . . . . . . . .
216 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 5 — Air Outlet — Side Window Demister Outlet — Instrument Cluster — Ignition Switch — Analog Clock 6 — Radio 7 — Passenger Airbag 8 — Glove Compartment 9 — Heated Seat Switch – If Equipped 10 — Hazard Switch 11 — Storage Compartment 12 — Climate Control 13 — Trunk Release Button 14 — Power Outlet
UNDERSTANDING YOUR INSTRUMENT PANEL 217 INSTRUMENT CLUSTER 4
218 UNDERSTANDING YOUR INSTRUMENT PANEL removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant tempera- as a supplement to the radiator and aids in removing heat ture. Any reading below the red mark of the gauge shows from the engine cooling system. that the engine cooling system is operating properly. The 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 5. Low Fuel Light If jump starting is required, refer to “Jump Starting Procedures” in “What To Do In Emergencies”. When the fuel level drops to approximately 2.0 gallons (7.6 Liters), the fuel symbol will light and 7. Air Bag Warning Light a single chime will sound. This light will turn on for four to eight seconds as a bulb check when the ignition switch is first NOTE: This light will remain on until a minimum of turned to ON/RUN.
220 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to “Occupant 10. Engine Temperature Warning Light Restraints” in “Things To Know Before Starting Your This light warns of an overheated engine condiVehicle” for further information. tion. As engine coolant temperatures rise and the 9. Oil Pressure Warning Light gauge approaches H, this indicator will illuminate and a single chime will sound after reaching a set threshold. This light indicates low engine oil pressure.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 11. Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system. The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system.
222 UNDERSTANDING YOUR INSTRUMENT PANEL off unless the parking brake is applied or a brake fault is NOTE: You must apply the brakes before shifting from detected. If the light does not illuminate, have the light PARK. inspected by an authorized dealer. 14. Odometer / Trip Odometer Display Area The light also will turn on when the parking brake is The odometer display shows the total distance the veapplied with the ignition switch in the ON/RUN posihicle has been driven. tion. U.S.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 The two trip odometers show individual trip mileage. To switch from odometer to trip odometers, press and SET CARgO SHIELd . . . . The Convertible Top Cargo Shield Must Be Put In The Stowed Position release the Trip Odometer button. To reset a trip odometer, display the desired trip odometer to be reset then push and hold the button until the display resets (ap- SPEEd TOO HIgH . . . .
224 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the instrument cluster is equipped with the optional Electronic Vehicle Information Center (EVIC), then all warnings including ”Low Tire,” “Door Ajar” and “Trunk Ajar” will only display in the EVIC. (Refer to “Electronic Vehicle Information Center (EVIC)” for specific messages). HOTOIL When this message is displayed there is a engine oil over-temperature condition.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 the problem continues, the message will appear the next the oil change indicator system (after performing the time the vehicle is started. See your authorized dealer scheduled maintenance) perform the following procedure: service center as soon as possible. CHANgE OIL 1. Turn the ignition switch to the ON/RUN position (do not start the engine). Your vehicle is equipped with an engine oil change indicator system. The “CHAngE OIL” message will flash 2.
226 UNDERSTANDING YOUR INSTRUMENT PANEL 15. Cruise Indicator — If Equipped 17. Electronic Throttle Control (ETC) Indicator Light This indicator shows that the Electronic Speed Control System is ON. This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected, the light will come on 16. Odometer/Trip Odometer Reset Button while the engine is running.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 18. Park/Headlight ON Indicator — If Equipped This indicator will illuminate when the park lights or headlights are turned on. 21. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on. 22. Vehicle Security Light — If Equipped 19. Electronic Stability Control (ESC) OFF Indicator Light — If Equipped This light will flash rapidly for approximately 16 seconds when the alarm system is arming.
228 UNDERSTANDING YOUR INSTRUMENT PANEL the conventional brake system will continue to operate running, a malfunction has been detected in the ESC normally provided that the BRAKE warning light is not on. system.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 • The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive following the maneuver that caused the ESC activation. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
230 UNDERSTANDING YOUR INSTRUMENT PANEL illuminated. This sequence will continue upon subseCAUTION! (Continued) quent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the sys- equipped on your vehicle. Undesirable system operatem may not be able to detect or signal low tire pressure tion or sensor damage may result when using reas intended.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the light after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing. CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system.
232 UNDERSTANDING YOUR INSTRUMENT PANEL NEUTRAL and run the engine at idle or faster until the 28. High Beam Indicator light turns off. This light indicates that the headlights are on high beam. Pull the turn signal lever toward the steerCAUTION! ing wheel to switch the headlights to low beam. Continuous driving with the Transmission Tempera- 29.
UNDERSTANDING YOUR INSTRUMENT PANEL 233 MINI-TRIP COMPUTER — IF EQUIPPED Control Buttons The Mini-Trip Computer is located in the instrument cluster and features a driver-interactive trip information and temperature display. NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated temperature is displayed.
234 UNDERSTANDING YOUR INSTRUMENT PANEL RESET Button Trip A To reset the display shown, turn the ignition switch to the Shows the total distance traveled for Trip A since the last ON position, then press and hold the RESET button reset. located on the steering wheel. Trip B The following displays can be reset or changed: Shows the total distance traveled for Trip B since the last • Trip A reset. • Trip B Trip Odometer (ODO) This display shows the distance traveled since the last reset.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED The EVIC consists of the following: • The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the • instrument cluster. • Compass Heading Display (N, S, E, W, NE, NW, SE, SW) Mileage (Avg/MPG) Miles To Empty • Low Tire Information (Tire Pressure Monitor System (TPMS) Displays) — if equipped • Timer • Units • System Warnings (Door Ajar, etc.
236 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by • MENU Button pressing the following buttons mounted on the steering Press and release the MENU button to advance wheel: the display to each of the EVIC Main Menu features. Upon reaching the last item in the Main Menu the EVIC will advance to the first item in the Main Menu with the next MENU button press and release.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 • SELECT Button • RKE (Remote Keyless Entry) Battery Low (with a single chime) Press and release the SELECT Button to accept a selection. The SELECT Button also resets • various Trip Functions.
238 UNDERSTANDING YOUR INSTRUMENT PANEL • Remote start aborted — Hood ajar • Remote start aborted — Trunk ajar • Remote start aborted — Fuel low • Remote start disabled — System fault • Convertible Top Not Secured (with a single chime) • Convertible Top Complete (with a single chime) • Secure Cargo Shield (with a single chime) • Speed Too High (with a single chime) • Convertible Top Malfunction (with a single chime) • Oil Change Required (with a single chime) • Check TPM System (with a single chime) Refer
UNDERSTANDING YOUR INSTRUMENT PANEL 239 1. Turn the ignition switch to the ON position (Do not • Average Fuel Economy start the engine.) • Distance to Empty 2. Fully depress the accelerator pedal slowly three times • Tire Pressure Status display within 10 seconds. • Elapsed Time 3. Turn the ignition switch to the LOCK position. • EVIC Units Selection NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not • System Status reset.
240 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated temperature is displayed. Engine temperature can also affect the displayed temperature; therefore, temperature readings are not updated when the vehicle is not moving.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally. Compass Variance Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences, the variance should be set for the zone where the vehicle is driven, per the zone map. Once properly set, the compass will automatically compensate for the differences and provide the most accurate compass heading.
242 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press and release the DOWN button until “Compass Distance To Empty (DTE) Variance” and the current Variance Value displays in Shows the estimated distance that can be traveled with the EVIC. the fuel remaining in the tank. This estimated distance is 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 243 Tire PSI Elapsed Time Press and release the MENU button until ⬙Tire PSI⬙ is Shows the total elapsed time of travel since the last reset. displayed. Elapsed time will increment when the ignition switch is in the RUN or START position. Tire pressure information is displayed as follows: Elapsed time is displayed as follows: • If tire pressure is OK for all tires, TIRE and a vehicle graphic are displayed with tire pressure values in each • Hours corner or the graphic.
244 UNDERSTANDING YOUR INSTRUMENT PANEL EVIC Units Selection (UNITS IN Display) Personal Settings (Customer-Programmable Displays the units used for the Outside Temperature, Features) Average Fuel Economy, Distance to Empty and Tire Personal Settings allows the driver to set and recall Pressure features. Press and Release the SELECT button features when the automatic transaxle is in PARK. to toggle units between ⬙U.S.⬙ and ⬙METRIC⬙.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Auto Unlock On Exit Flash Lamp with LOCK When ON is selected and the transaxle is in the PARK or NEUTRAL position, all doors will unlock when the driver’s door is opened. To make your selection, press the SELECT button until ON or OFF appears. When ON is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the RKE transmitter. This feature may be selected with or without the Sound Horn with LOCK feature selected.
246 UNDERSTANDING YOUR INSTRUMENT PANEL headlights will also turn off when the wipers are turned off if they were turned on by this feature. To make your selection, press the SELECT button until ON or OFF appears. Illumin. Approach When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the remote keyless entry transmitter.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 SETTING THE ANALOG CLOCK Uconnect® 730N/430/430N CD/DVD/HDD/NAV — To set the analog clock, located at the top center of the IF EQUIPPED instrument panel, press and hold the button in until the Refer to your Uconnect® Supplement Manual for desetting is correct. The clock will adjust slowly at first and tailed operating instructions. then quicker the longer the button is held.
248 UNDERSTANDING YOUR INSTRUMENT PANEL Power Switch/Volume Control (Rotary) Uconnect® 130 Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning the ON/VOLUME control knob to the right increases the volume, and to the left decreases it.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 another selection. Holding either button will bypass 5. To exit, press any button/knob, or wait five seconds. stations without stopping, until you release it. RW/FF TIME Button Pressing the RW (Rewind) or FF (Fast Forward) buttons Press the TIME button to alternate display of the time causes the tuner to search for the next frequency in the and radio frequency. direction of the arrows. This feature operates in either AM or FM frequencies.
250 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the AM/FM Button mid-range tones. Press the buttons to select either AM or FM mode. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Operation Instructions — CD MODE For CD And MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC position to operate the radio.
252 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! (Continued) • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 SEEK Button AM/FM Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. Press the button to select either AM or FM mode.
254 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Media (Disc Types) The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. Supported Medium Formats (File Systems) display the file name and folder name, and will assign a number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.
256 UNDERSTANDING YOUR INSTRUMENT PANEL To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium single-session disc, enable the “Disc at Once” option before writing to the disc. contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 TIME Button (Auxiliary Mode) Operating Instructions — Radio Mode Press this button to change the display to time of day. The NOTE: The ignition switch must be in the ON or ACC time of day will display for five seconds (when ignition is position to operate the radio. OFF). Power Switch/Volume Control (Rotary) Uconnect® 130 WITH SATELLITE RADIO Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
258 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped With Press and release the SEEK buttons to search for the next Uconnect Phone” message will display on the radio listenable station in AM/FM mode. Press the right switch screen. to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make Phone Button Uconnect® Phone — If Equipped another selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 starting at Step 2. For vehicles not equipped with satellite radio, press the SETUP button and then follow the above 1. Press and hold the TIME button until the hours blink. procedure, starting at Step 2. 2. Adjust the hours by turning the right side TUNE/ INFO Button SCROLL control knob. Press the INFO button for an RDS station (one with call 3. After adjusting the hours, press the right side TUNE/ letters displayed).
260 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a fifth time and FADE will display. Turn the TUNE/SCROLL control Push the rotary TUNE/SCROLL control knob and BASS knob to the left or right to adjust the sound level between will display. Turn the TUNE/SCROLL control knob to the front and rear speakers. the right or left to increase or decrease the bass tones.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 Program Type No program type or undefined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies Personality 16-Digit Character Display None Adlt Hit Classicl Cls Rock College Country Language Inform Jazz News Nostalga Oldies Persnlty Program Type Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 16-Digit Character Display Public R&B Rel Mus
262 UNDERSTANDING YOUR INSTRUMENT PANEL station with the same selected Music Type name. The AM/FM Button Music Type function only operates when in the FM Press the button to select either AM or FM mode. mode. SET/RND Button — To Set the Pushbutton If a preset button is activated while in the Music Type Memory (Program Type) mode, the Music Type mode will be When you are receiving a station that you wish to exited and the radio will tune to the preset station.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 and 12 FM stations to be stored into pushbutton memory. Operation Instructions — CD MODE for CD and The stations stored in SET 2 memory can be selected by MP3 Audio Play pressing the pushbutton twice. NOTE: Every time a preset button is used, a corresponding • The ignition switch must be in the ON or ACC position button number will display. to operate the radio.
264 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! (Continued) • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 SEEK Button AM/FM Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. Press the button to select either AM or FM mode.
266 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Media (Disc Types) The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. Supported Medium Formats (File Systems) display the file name and folder name, and will assign a number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.
268 UNDERSTANDING YOUR INSTRUMENT PANEL To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium single-session disc, enable the “Disc at Once” option before writing to the disc. contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 Press the INFO button once more to return to ⬙elapsed AUX audio sounds distorted, turn the device’s volume down. time⬙ priority mode. Press and hold the INFO button for three seconds or TIME Button (Auxiliary Mode) more and the radio will display song titles for each file. Press this button to change the display to time of day.
270 UNDERSTANDING YOUR INSTRUMENT PANEL System Activation To access the ESN/SID, refer to the following steps: Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 decreased performance. Larger luggage items such as Operating Instructions - Uconnect® (Satellite) bikes should be placed as far rearward as possible, within Mode the loading design of the rack. Do not place items directly NOTE: The ignition switch must be in the ON/RUN or on or above the antenna. ACC position to operate the radio.
272 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button MUSIC TYPE Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if available). Also, pressing and holding the INFO button for an additional three seconds will make the radio display the Song Title all of the time (press and hold again to return to normal display). Pressing this button once will turn on the Music Type mode for five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 • Display Sirius ID number — Press the AUDIO/ pushbutton memory. The channels stored in SET 2 SELECT button to display the Sirius ID number. This memory can be selected by pressing the pushbutton number is used to activate, deactivate, or change the twice. Sirius subscription. Every time a preset button is used, a corresponding button number will display.
274 UNDERSTANDING YOUR INSTRUMENT PANEL iPod® control supports Mini, 4G, Photo, Nano, 5G iPod® and iPhone® devices. Some iPod® software versions may not fully support the iPod® control features. Please visit Apple’s website for software updates. NOTE: • If the radio has a USB port, refer to the appropriate Uconnect® Multimedia radio User’s Manual for iPod® or external USB device support capability.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 NOTE: If the audio device battery is completely discharged, it may not communicate with the iPod®/USB/ MP3 control system until a minimum charge is attained. Leaving the audio device connected to the iPod®/USB/ MP3 control system may charge it to the required level.
276 UNDERSTANDING YOUR INSTRUMENT PANEL during play mode will jump to the next track in the • Turning it clockwise (forward) by one click, while playing a track, skips to the next track or press the list, or press the VR button and say ⬙Next or Previous Track.⬙ VR button and say ⬙Next Track.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 SCAN button again. During Scan mode, pressing the << SEEK and SEEK>> buttons will select the previous and next tracks. • RND button (available on sales code RES radio only): Pressing this button toggles between Shuffle ON and Shuffle OFF modes for the iPod® or external USB device, or press the VR button and say ⬙Shuffle ON⬙ or ⬙Shuffle Off.⬙ If the RND icon is showing on the radio display, then the shuffle mode is ON.
278 UNDERSTANDING YOUR INSTRUMENT PANEL • MUSIC TYPE button: The MUSIC TYPE button is • Preset 4 – Genres another shortcut button to the genre listing on your • Preset 5 – Audiobooks audio device. • Preset 6 – Podcasts • Pressing a PRESET button will display the current CAUTION! list on the top line and the first item in that list on the second line.
UNDERSTANDING YOUR INSTRUMENT PANEL 279 WARNING! Do not plug in or remove the iPod® or external USB device while driving. Failure to follow this warning could result in an accident. Bluetooth Streaming Audio (BTSA) device first, then it will get streamed to the Uconnect® phone system. Seven devices can be paired to the Uconnect® phone system, but just one can be selected and played. Selecting A Different Audio Device 1. Press the PHONE button to begin.
280 UNDERSTANDING YOUR INSTRUMENT PANEL Previous Track STEERING WHEEL AUDIO CONTROLS — IF Use the SEEK DOWN button, or press the VR button on EQUIPPED the radio and say “Previous Track,” to jump to the previous music track on your cellular phone. Browse Browsing is not available on a Bluetooth Streaming Audio (BTSA) device. Only the current song that is playing will display info.
UNDERSTANDING YOUR INSTRUMENT PANEL 281 The remote sound system controls are located on the rear Radio Operation surface of the steering wheel, at the three and nine Pressing the top of the switch will SEEK up for the next o’clock positions. listenable station, and pressing the bottom of the switch The right-hand rocker switch has a pushbutton in the will SEEK down for the next listenable station.
282 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular To keep a CD/DVD in good condition, take the following disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, precautions: or have protection encoding. Try a known good disc 1. Handle the disc by its edge; avoid touching the before considering disc player service. surface. RADIO OPERATION AND MOBILE PHONES 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 283 The Manual Temperature Controls consist of a series of The air conditioning and heating system is designed to outer rotary dials and inner push knobs. make you comfortable in all types of weather. Blower Control CLIMATE CONTROLS Manual Heating And Air Conditioning Rotate this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position.
284 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Control Air Conditioning Control Press this button to engage the Air Conditioning. A light will illuminate when the Air Conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer temperatures. Rotate this control to regulate the temperature of the air inside the passenger compartment.
UNDERSTANDING YOUR INSTRUMENT PANEL 285 select Panel, Bi-Level or Floor mode and move the NOTE: The center instrument panel outlets can be aimed so that they are directed toward the rear seat passengers temperature control to the desired temperature. for maximum airflow to the rear. Mode Control (Air Direction) • Bi-Level Rotate this control to choose from several patterns of air distribution.
286 UNDERSTANDING YOUR INSTRUMENT PANEL • Mix • Recirculation Control Air is directed through the floor, defrost, and side Pressing the Recirculation Control button will temporarily put the system in recirculation window demist outlets. This setting works best in mode. This can be used when outside condicold or snowy conditions that require extra heat to the windshield. This setting is good for maintaining comfort tions such as smoke, odors, dust, or high humidity are present.
UNDERSTANDING YOUR INSTRUMENT PANEL 287 • The A/C will engage automatically to prevent fogging Automatic Temperature Control (ATC) — If when the recirculation button is pressed and the mode Equipped control is set to panel or Bi-Level. • Recirculated air is not allowed in Defrost modes. If the Recirculation button is pressed while in Defrost mode, the LED indicator will flash several times then go out. Recirculation will be disabled automatically when Defrost mode is selected.
288 UNDERSTANDING YOUR INSTRUMENT PANEL Operation of the system is quite simple. the “O” (OFF) position on the blower control stops the system completely and closes the outside air intake. 1. Turn the Mode Control knob (on the right) and the 72°F (22°C) is the recommended setting for maximum Blower Control knob (on the left) to AUTO comfort for the average person; however, this may vary. NOTE: The AUTO position performs best for front seat occupants only.
UNDERSTANDING YOUR INSTRUMENT PANEL 289 the radiator and through the condenser. Fabric front Manual Operation fascia protectors may reduce airflow to the condenser, This system offers a full complement of manual override reducing air conditioning performance. features, which consist of Blower Preferred Automatic, • While operating in AUTO, the system will not auto- Mode Preferred Automatic, or Blower and Mode Prematically sense the presence of fog, mist or ice on the ferred Automatic.
290 UNDERSTANDING YOUR INSTRUMENT PANEL
UNDERSTANDING YOUR INSTRUMENT PANEL 291 The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and • Panel side window demist outlets. Air is directed through the outlets in the instru- • Mix ment panel. These outlets can be adjusted to direct Air is directed through the floor, defrost, and side airflow.
292 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: Press this button to turn on the air • When the ignition switch is turned to the LOCK position, the recirculation feature will be cancelled. conditioning during manual operation only. When the air conditioning is • In cold weather, use of the Recirculation mode may turned on, cool dehumidified air will lead to excessive window fogging.
UNDERSTANDING YOUR INSTRUMENT PANEL 293 • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
294 UNDERSTANDING YOUR INSTRUMENT PANEL coolant that meets the requirements of Chrysler Material Standard MS-12106 and 50% water is recommended. Refer to “Maintenance Procedures” in “Maintaining Your Vehicle” for proper coolant selection. Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide sufficient heating.
UNDERSTANDING YOUR INSTRUMENT PANEL 295 Side Window Demisters A/C Air Filter — If Equipped A side window demister outlet is located at each end of the instrument panel. These non-adjustable outlets direct air toward the side windows when the system is in the FLOOR, MIX, or DEFROST mode. The air is directed at the area of the windows through which you view the outside mirrors. The A/C Filter prevents most dust and pollen from entering the cabin.
296 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions
STARTING AND OPERATING CONTENTS 䡵 STARTING PROCEDURES . . . . . . . . . . . . . . . .301 ▫ Normal Starting. . . . . . . . . . . . . . . . . . . . . . .301 ▫ Extreme Cold Weather (Below –20°F Or −29°C) . . . . . . . . . . . . . . . .302 ▫ After Starting . . . . . . . . . . . . . . . . . . . . . . . .302 䡵 ENGINE BLOCK HEATER — IF EQUIPPED . . .302 䡵 AUTOMATIC TRANSMISSION . . . . . . . . . . . .303 ▫ Key Ignition Park Interlock. . . . . . . . . . . . . . .304 ▫ Brake/Transmission Shift Interlock System . . .
298 STARTING AND OPERATING 䡵 DRIVING THROUGH WATER . . . . . . . . . . . . .322 ▫ Flowing/Rising Water . . . . . . . . . . . . . . . . . .323 ▫ Shallow Standing Water . . . . . . . . . . . . . . . . .323 䡵 POWER STEERING . . . . . . . . . . . . . . . . . . . . .324 ▫ Power Steering Fluid Check . . . . . . . . . . . . . .326 䡵 PARKING BRAKE . . . . . . . . . . . . . . . . . . . . . .327 䡵 ANTI-LOCK BRAKE SYSTEM (ABS) . . . . . . . . .329 䡵 ELECTRONIC BRAKE CONTROL SYSTEM . . . .
STARTING AND OPERATING 299 ▫ Run Flat Tires – If Equipped . . . . . . . . . . . . . .354 䡵 FUEL REQUIREMENTS . . . . . . . . . . . . . . . . . .370 ▫ Spare Tires – If Equipped . . . . . . . . . . . . . . . .354 ▫ Reformulated Gasoline . . . . . . . . . . . . . . . . .371 ▫ Tire Spinning . . . . . . . . . . . . . . . . . . . . . . . .357 ▫ Gasoline/Oxygenate Blends . . . . . . . . . . . . . .371 ▫ Tread Wear Indicators . . . . . . . . . . . . . . . . . .358 ▫ E-85 Usage In Non-Flex Fuel Vehicles . . .
300 STARTING AND OPERATING ▫ Fuel Requirements . . . . . . . . . . . . . . . . . . . .376 ▫ Gross Vehicle Weight Rating (GVWR) . . . . . . .382 ▫ Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles . . . . . . . . . . . . .377 ▫ Gross Axle Weight Rating (GAWR) . . . . . . . . .382 ▫ Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . .378 ▫ Cruising Range . . . . . . . . . . . . . . . . . . . . . . .378 ▫ Replacement Parts . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 301 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
302 STARTING AND OPERATING Tip Start ENGINE BLOCK HEATER — IF EQUIPPED Do not press the accelerator. Turn the ignition key briefly to START position, and release it. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds. If this occurs, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure.
STARTING AND OPERATING 303 AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly pressing the brake pedal.
304 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, turn the engine OFF, and remove the ignition key. Once the key is removed, the transmission is locked in PARK, securing the vehicle against unwanted movement.
STARTING AND OPERATING 305 when the ignition is in the LOCK position, and once Four-Speed Automatic Transmission — If removed, the transmission is locked in PARK. Equipped NOTE: If a malfunction occurs, the system will trap the key in the ignition switch to warn you that this safety feature is inoperable. The engine can be started and stopped but the key cannot be removed until you obtain service.
306 STARTING AND OPERATING the transmission locking mechanism may make it difficult to move the shift lever out of PARK. As an added DO NOT race the engine when shifting from PARK or precaution, turn the front wheels toward the curb on a NEUTRAL into another gear range. downhill grade and away from the curb on an uphill NOTE: After selecting any gear range, wait a moment to grade. allow the selected gear to engage before accelerating. This is especially important when the engine is cold.
STARTING AND OPERATING 307 WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal.
308 STARTING AND OPERATING CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • Look at the transmission gear position display and verify that it indicates the PARK position.
STARTING AND OPERATING 309 WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause severe transmission damage.
310 STARTING AND OPERATING During cold temperatures, transmission operation may be modified depending on engine and transmission temperature as well as vehicle speed. This feature improves warm up time of the engine and transmission to achieve maximum efficiency. Engagement of the torque converter clutch is inhibited until the transmission fluid is warm (refer to the “Note” under “Torque Converter Clutch” in this section).
STARTING AND OPERATING 311 PARK, REVERSE, and NEUTRAL will continue to operate. The Malfunction Indicator Light (MIL) may be illuminated. Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without damaging the transmission. NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur.
312 STARTING AND OPERATING • the engine coolant has reached an adequate tempera- is not shifting into Overdrive when cold. This is normal. Shifting between the DRIVE and 3 ranges, when the ture, transmission is sufficiently warm, will demonstrate that • vehicle speed is sufficiently high, and the transmission is able to shift into and out of Overdrive. • the driver is not heavily pressing the accelerator.
STARTING AND OPERATING 313 Only shift from DRIVE to PARK or REVERSE when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shifting between these gears. The transmission shift lever has PARK, REVERSE, NEUTRAL, DRIVE, and AutoStick® shift positions. Manual shifts can be made using the AutoStick® shift control (refer to “AutoStick®” in this section for further information).
314 STARTING AND OPERATING NOTE: After selecting any gear range, wait a moment to downhill grade and away from the curb on an uphill allow the selected gear to engage before accelerating. grade. This is especially important when the engine is cold. PARK (P) This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range.
STARTING AND OPERATING 315 WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal.
316 STARTING AND OPERATING CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • Look at the transmission gear position display and verify that it indicates the PARK position.
STARTING AND OPERATING 317 WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause severe transmission damage.
318 STARTING AND OPERATING During cold temperatures, transmission operation may be modified depending on engine and transmission temperature as well as vehicle speed. This feature improves warm up time of the engine and transmission to achieve maximum efficiency. Engagement of the torque converter clutch is inhibited until the transmission fluid is warm (refer to the “Note” under “Torque Converter Clutch” in this section).
STARTING AND OPERATING 319 NOTE: Even if the transmission can be reset, we recom- • The engine coolant has reached an adequate temperamend that you visit your authorized dealer at your ture. earliest possible convenience. Your authorized dealer has • The vehicle speed is sufficiently high. diagnostic equipment to determine if the problem could recur. • The driver is not heavily pressing the accelerator. If the transmission cannot be reset, authorized dealer Torque Converter Clutch service is required.
320 STARTING AND OPERATING is not shifting into Overdrive when cold. This is normal. Using the AutoStick® shift control, when the transmission is sufficiently warm, will demonstrate that the transmission is able to shift into and out of Overdrive. gear being used. Moving the shift lever to the left (-) triggers a downshift and to the right (+) an upshift. The current gear will be displayed in the instrument cluster.
STARTING AND OPERATING 321 • The transmission will automatically upshift when nec- AutoStick® position at any time without taking your foot essary to prevent engine over-speed. off the accelerator pedal. • If a requested downshift would cause the engine to over-speed, that shift will not occur. • Avoid using speed control when AutoStick® is engaged. • Transmission shifting will be more noticeable when AutoStick® is engaged. WARNING! Do not downshift for additional engine braking on a slippery surface.
322 STARTING AND OPERATING WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have a collision. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow, wet, mud, loose sand, etc.). Traction 2. Slow down if the road has standing water or puddles. 3. Replace the tires when tread wear indicators first become visible. 4. Keep tires properly inflated. 5.
STARTING AND OPERATING 323 Flowing/Rising Water WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly. Failure to follow this warning may result in injuries that are serious or fatal to you, your passengers, and others around you.
324 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
STARTING AND OPERATING 325 If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers. WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible.
326 STARTING AND OPERATING Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized dealer. CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components.
STARTING AND OPERATING 327 possible. To release the parking brake, pull the lever up slightly, press the center button, then lower the lever Before leaving the vehicle, make sure that the parking completely. brake is fully applied. Also, be certain to leave the transmission in PARK. When the parking brake is applied with the ignition switch ON, the “Brake Warning Light” in the instrument cluster will illuminate.
328 STARTING AND OPERATING from the curb on an uphill grade. Apply the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. The parking brake should always be applied whenever the driver is not in the vehicle. WARNING! • Never use the PARK position as a substitute for the parking brake.
STARTING AND OPERATING 329 WARNING! (Continued) • Do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. CAUTION! If the “Brake Warning Light” remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately.
330 STARTING AND OPERATING WARNING! (Continued) • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the user’s safety or the safety of others. The “Anti-Lock Brake Warning Light” monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
STARTING AND OPERATING 331 ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops. You also may experience the following when the brake system goes into anti-lock: • The ABS motor running (it may continue to run for a short time after the stop). • The clicking sound of solenoid valves.
332 STARTING AND OPERATING systems work together to enhance vehicle stability and control in various driving conditions and are commonly referred to as ESC. Anti-Lock Brake System (ABS) WARNING! (Continued) very slippery surfaces, or hydroplaning. The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others. This system aids the driver in maintaining vehicle control under adverse braking conditions.
STARTING AND OPERATING 333 This feature remains active even if TCS and ESC are in the “Partial Off” mode. Refer to “Electronic Stability Control (ESC)” in this section of this manual. Brake Assist System (BAS) WARNING! • The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
334 STARTING AND OPERATING the brake of the appropriate wheel to assist in counteracting the over/under steer condition. Engine power may also be reduced to help the vehicle maintain the desired path. ESC uses sensors in the vehicle to determine the vehicle path intended by the driver and compares it to the actual path of the vehicle.
STARTING AND OPERATING 335 Full On This is the normal operating mode for ESC. Whenever the vehicle is started the ESC system will be in this mode. This mode should be used for almost all driving situations. ESC should only be turned to “Partial Off” for specific reasons as noted below. Partial Off This mode is entered by momentarily pressing the “ESC Off” switch (located in the lower switch bank below the heater/air conditioning controls).
336 STARTING AND OPERATING WARNING! When in “Partial Off” mode, the TCS functionality of ESC (except for the limited slip feature described in the TCS section) has been disabled and the “ESC Off Indicator Light” will be illuminated. When in “Partial Off” mode, the engine power reduction of TCS is disabled, and the enhanced vehicle stability offered by the ECS system is reduced.
STARTING AND OPERATING 337 flashes when TCS is active. If the “ESC Activation/ • The ESC system will make buzzing or clicking sounds Malfunction Indicator Light” begins to flash during acwhen it is active. This is normal; the sounds will stop celeration, ease up on the accelerator and apply as little when ESC becomes inactive following the maneuver throttle as possible. Be sure to adapt your speed and that caused the ESC activation. driving to the prevailing road conditions.
338 STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation.
STARTING AND OPERATING 339 • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure comstandards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall. Example: 31x10.5 R15 LT. the sidewall preceding the size designation. Example: T145/80D18 103M. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ...
340 STARTING AND OPERATING EXAMPLE: R = Construction code — ⬙R⬙ means radial construction — ⬙D⬙ means diagonal or bias construction 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved und
STARTING AND OPERATING 341 EXAMPLE: Load Identification: ⴖ....blank....
342 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation — This symbol certifies that the tire is in compliance with the U.S.
STARTING AND OPERATING 343 Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
344 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
STARTING AND OPERATING 345 Tire And Loading Information Placard This placard tells you important information about the: 1) Number of people that can be carried in the vehicle. 2) Total weight your vehicle can carry. 3) Tire size designed for your vehicle. 4) Told tire inflation pressures for the front, rear, and spare tires. Loading Tire and Loading Information Placard The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
346 STARTING AND OPERATING NOTE: Under a maximum loaded vehicle condition, Steps For Determining Correct Load Limit gross axle weight ratings (GAWRs) for the front and rear 1. Locate the statement “The combined weight of occuaxles must not be exceeded. For further information on pants and cargo should never exceed XXX lbs or GAWRs, vehicle loading, and trailer towing, refer to XXX kg” on your vehicle’s placard. “Vehicle Loading” in this section. 2.
STARTING AND OPERATING 347 5. Determine the combined weight of luggage and cargo NOTE: being loaded on the vehicle. That weight may not • The following table shows examples on how to calcusafely exceed the available cargo and luggage load late total load, cargo/luggage, and towing capacities capacity calculated in Step 4. of your vehicle with varying seating configurations 6. If your vehicle will be towing a trailer, load from your and number and size of occupants.
348 STARTING AND OPERATING
STARTING AND OPERATING 349 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
350 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy stability of the vehicle and can produce a feeling of sluggish response or over responsiveness in the steering. NOTE: • Unequal tire pressures from side to side may cause erratic and unpredictable steering response.
STARTING AND OPERATING 351 judgement when determining proper inflation. Tires Check tire pressures more often if subject to a wide range may look properly inflated even when they are under- of outdoor temperatures, as tire pressures vary with inflated. temperature changes. • Inspect tires for signs of tire wear or visible damage. CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap.
352 STARTING AND OPERATING Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds and WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
STARTING AND OPERATING 353 Consult an authorized tire dealer for tire repairs and Summer Or Three Season Tires – If Equipped additional information. Summer tires provide traction in both wet and dry Damaged Run Flat tires, or Run Flat tires that have conditions, and are not intended to be driven in snow or experienced a loss of pressure should be replaced imme- on ice.
354 STARTING AND OPERATING Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph (120 km/h). For speeds above 75 mph (120 km/h) refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures. Run Flat mode. A Run Flat mode occurs when the tire inflation pressure is of/or below 14 psi (96 kPa).
STARTING AND OPERATING 355 CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with a compact, full size or limited-use temporary spare installed. Damage to the vehicle may result. Spare Tire Matching Original Equipped Tire And Wheel – If Equipped Your vehicle may be equipped with a spare tire and wheel equivalent in look and function to the original equipment tire and wheel found on the front or rear axle of your vehicle.
356 STARTING AND OPERATING Do not install more than one compact spare tire and spare tire needs to be replaced. Since it is not the same as wheel on the vehicle at any given time. your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity. WARNING! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life.
STARTING AND OPERATING 357 WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressures listed on your Tire and Loading Information Placard located on the driver’s side B-Pillar or the rear edge of the driver’s side door.
358 STARTING AND OPERATING These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer replaced. to “Replacement Tires” in this section for further information.
STARTING AND OPERATING 359 WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. Information placard or the Vehicle Certification Label for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall.
360 STARTING AND OPERATING WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
STARTING AND OPERATING 361 The suggested rotation method is the “rearward cross” shown in the following diagram. This rotation pattern The tires on the front and rear of your vehicle operate at does not apply to some directional tires that must not be different loads and perform different steering, driving, reversed. and braking functions. For these reasons, they wear at unequal rates. TIRE ROTATION RECOMMENDATIONS These effects can be reduced by timely rotation of tires.
362 STARTING AND OPERATING also increase as the vehicle is driven - this is normal and there should be no adjustment for this increased presThe Tire Pressure Monitor System (TPMS) will warn the sure. driver of a low tire pressure based on the vehicle recommended cold placard pressure.
STARTING AND OPERATING 363 to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information. For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 23 psi (158 kPa).
364 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in • The TPMS is not intended to replace normal tire care the tire. and maintenance, or to provide warning of a tire Base System failure or condition. NOTE: • The TPMS should not be used as a tire pressure gauge The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to while adjusting your tire pressure.
STARTING AND OPERATING 365 Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster, a ⬙LOW TIRE⬙ message will be displayed for a minimum of five seconds and a chime will sound when tire pressure is low in one or more of the four active road tires. An ⬙Inflate to XX⬙ message will also be displayed.
366 STARTING AND OPERATING 4. For each subsequent ignition key cycle, a chime will sound and the “Tire Pressure Monitoring Telltale NOTE: Light” will flash on and off for 75 seconds and then remain on solid. 1. The compact spare tire (if equipped) does not have a tire pressure monitoring sensor. Therefore, the TPMS 5. Once you repair or replace the original road tire, and will not monitor the pressure in the compact spare tire.
STARTING AND OPERATING 367 monitor tire pressure levels. Sensors, mounted to each Tire Pressure Monitoring Low Pressure Warnings wheel as part of the valve stem, transmit tire pressure readings to the Receiver Module.
368 STARTING AND OPERATING The vehicle may need to be driven for up to 20 minutes 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the above 15 mph (24 km/h) in order for the TPMS to receive TPM sensors. this information. Check TPMS Warning 2. Installing some form of aftermarket window tinting that affects radio wave signals. When a system fault is detected, a chime will sound and the “Tire Pressure Monitoring Telltale Light” will flash on 3.
STARTING AND OPERATING 369 The system still needs to be serviced as long as the 3. After driving the vehicle for up to 20 minutes above ⬙CHECK TPM SYSTEM⬙ message is displayed. 15 mph (24 km/h), the “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and NOTE: then remain on solid. In addition, the EVIC will display a ⬙CHECK TPM SYSTEM⬙ message for a 1. The compact spare tire (if so equipped) does not have a tire pressure monitoring sensor.
370 STARTING AND OPERATING 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically. In addition, the “Tire Pressure Monitoring Telltale Light” will turn OFF and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long no tire pressure is below the low-pressure warning limit in any of the four active road tires.
STARTING AND OPERATING 371 Light spark knock at low engine speeds is not harmful to your engine. However, continued heavy spark knock at high speeds can cause damage and immediate service is required. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these symptoms, try another brand of gasoline before considering service for the vehicle.
372 STARTING AND OPERATING CAUTION! (Continued) blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the “Malfunction Indicator Light” to illuminate. Pump labels should clearly communicate if a fuel contains greater than 10% Ethanol. • Operate in a lean mode. • OBD II “Malfunction Indicator Light” on. • Poor engine performance. • Poor cold start and cold drivability.
STARTING AND OPERATING 373 MMT In Gasoline Materials Added To Fuel MMT (Methylcyclopentadienyl Manganese Tricarbonyl) is a manganese-containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles.
374 STARTING AND OPERATING CAUTION! (Continued) • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact your authorized dealer for service assistance. • The use of fuel additives, which are now being sold as octane enhancers, is not recommended.
STARTING AND OPERATING 375 WARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. FLEXIBLE FUEL (3.6L ENGINE ONLY) — IF EQUIPPED 5 E-85 General Information The information in this section is for Flexible Fuel vehicles only.
376 STARTING AND OPERATING WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smoking materials lit in or near the vehicle when removing the fuel filler tube cap (gas cap) or filling the tank. Do not use E-85 as a cleaning agent and never use it near an open flame.
STARTING AND OPERATING 377 When you do switch fuel types it is recommended that: • You do not add less than 5 gallons (19 Liters) when refueling. engine. To eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as MOPAR® Injector Cleanup or Techron may be used. • You drive the vehicle immediately after refueling for at Selection Of Engine Oil For Flexible Fuel Vehicles least 5 miles (8 km).
378 STARTING AND OPERATING Starting Replacement Parts The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C). In the range of 0°F (-18°C) to 32°F (0°C), you may experience an increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up. Many components in your Flexible Fuel Vehicle (FFV) are designed to be compatible with ethanol.
STARTING AND OPERATING 379 ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.
380 STARTING AND OPERATING After removing the gas cap, place the gas cap tether cable NOTE: If the gas cap is lost or damaged, be sure the over a hook on the inside of the fuel door. This keeps the replacement cap is for use with this vehicle. gas cap suspended away from and protects the vehicle’s surface. CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap).
STARTING AND OPERATING 381 WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and doing so may cause the MIL to turn on. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling.
382 STARTING AND OPERATING appear the next time the vehicle is started. This might • Type of Vehicle indicate a damaged cap. If the problem is detected twice • Month Day and Hour of Manufacture (MDH) in a row, the system will turn on the MIL. Resolving the The bar code allows a computer scanner to read the VIN. problem will turn the MIL off. VEHICLE LOADING Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo.
STARTING AND OPERATING 383 WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have a collision. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
384 STARTING AND OPERATING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting and Operating” for In this section you will find safety tips and information further information. on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully Gross Trailer Weight (GTW) review this information to tow your load as efficiently The GTW is the weight of the trailer plus the weight of all and safely as possible.
STARTING AND OPERATING 385 evenly. Make sure that you do not exceed either front or Frontal Area rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica- The frontal area is the maximum height multiplied by the tion Label” in “Starting and Operating” for further maximum width of the front of a trailer. information. Weight-Carrying Hitch WARNING! It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded.
386 STARTING AND OPERATING Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.
STARTING AND OPERATING 387 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission 2.4L/Auto 3.6L/Auto Max. Frontal Area Max. Gross Trailer Wt. (GTW) 1,000 lbs (450 kg) 11 sq.ft. (1.0 sq.m) (See Note 2) 22 sq.ft. (2.0 sq.m) 1,000 lbs (450 kg) Refer to local laws for maximum trailer towing speeds.
388 STARTING AND OPERATING Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer collisions.
STARTING AND OPERATING 389 NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “Tire and Loading Information” placard for the maximum combined weight of occupants and cargo for your vehicle.
390 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Make certain that the load is secured in the trailer and it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision. • When hauling cargo or towing a trailer, do not overload your vehicle or trailer.
STARTING AND OPERATING 391 Towing Requirements – Tires • Do not attempt to tow a trailer while using a compact spare tire. replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GAWR limits. Towing Requirements – Trailer Brakes • Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.
392 STARTING AND OPERATING CAUTION! WARNING! (Continued) If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. • Towing any trailer will increase your stopping distance. When towing you should allow for additional space between your vehicle and the vehicle in front of you.
STARTING AND OPERATING 393 Automatic Transmission The DRIVE range can be selected when towing. However, if frequent shifting occurs while in DRIVE, select the ⬙3⬙ range (with four-speed transmission), or select a lower gear using the AutoStick® shift control (with six-speed transmission). NOTE: Check the transmission fluid level (four-speed transmission only) before towing. The six-speed transmission does not require a fluid level check before towing.
394 STARTING AND OPERATING Electronic Speed Control – If Equipped City Driving • Do not use in hilly terrain or with heavy loads. When stopped for short periods of time, shift the transmission into NEUTRAL and increase engine idle speed. • When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until Highway Driving you can get back to cruising speed. Reduce speed.
STARTING AND OPERATING 395 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Flat Tow Dolly Tow On Trailer Wheels OFF the Ground NONE Front Rear ALL All Models NOT ALLOWED OK NOT ALLOWED OK 3. Firmly apply the parking brake. Place the transmission in PARK. Recreational towing is allowed ONLY if the front wheels are OFF the ground. This may be accomplished using a 4.
396 STARTING AND OPERATING CAUTION! • DO NOT flat tow this vehicle. Damage to the drivetrain will result. • Towing this vehicle in violation of the above requirements can cause severe transmission damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 HAZARD WARNING FLASHERS . . . . . . . . . . .398 ▫ Road Tire Installation . . . . . . . . . . . . . . . . . . .408 䡵 IF YOUR ENGINE OVERHEATS . . . . . . . . . . . .398 䡵 JUMP-STARTING . . . . . . . . . . . . . . . . . . . . . .411 ▫ Engine Oil Overheating — 2.4L Engine Only (If Equipped). . . . . . . . . . . . . . . . . . . . . . . . .399 䡵 JACKING AND TIRE CHANGING . . . . . . . . . .400 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . .
398 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all direc- • On the highways — slow down.
WHAT TO DO IN EMERGENCIES 399 supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. Turn off the air conditioning and wait until the pointer drops back into the normal range.
400 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
WHAT TO DO IN EMERGENCIES 401 Spare Tire Removal Preparations For Jacking Lift up the load floor cover and remove the hold down. 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on the Hazard Warning flashers. 3. Set the parking brake. Spare Tire And Jack Storage 4.
402 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES 403 WARNING! (Continued) • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle.
404 WHAT TO DO IN EMERGENCIES 3. There is a front and rear jacking location on each side of the vehicle. The plastic trim has been cut away to expose the jacking locations on the body. Removing Jack H3andle From Jack 2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3.
WHAT TO DO IN EMERGENCIES 405 6 Rear Jacking Location 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged to the jacking location on the wheel to be changed. Do not raise the vehicle until you are sure the jack is securely engaged.
406 WHAT TO DO IN EMERGENCIES 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability. 6. Remove the wheel nuts, and pull the wheel and wheel covers (where applicable) off the hub. Install the spare wheel and wheel nuts with the cone shaped end of the nuts toward the wheel. Lightly tighten the nuts.
WHAT TO DO IN EMERGENCIES 407 WARNING! • To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. • To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. 7. Lower the vehicle by turning the jack screw to the left. Mounting Spare Tire 8. Finish tightening the nuts.
408 WHAT TO DO IN EMERGENCIES 9. Lower the jack until it is free. Remove the wheel Road Tire Installation blocks. Reassemble the lug wrench to the jack assemVehicles Equipped With Wheel Covers bly and stow it in the spare tire area. Secure the assembly using the means provided. Release the park- 1. Mount the road tire on the axle. ing brake before driving the vehicle. 2.
WHAT TO DO IN EMERGENCIES 409 3. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover. 4. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts.
410 WHAT TO DO IN EMERGENCIES 6. Finish tightening the lug nuts. Push down on the WARNING! wrench while at the end of the handle for increased leverage. Tighten the lug nuts in a star pattern until To avoid the risk of forcing the vehicle off the jack, each nut has been tightened twice. The correct tight- do not tighten the wheel nuts fully until the vehicle ness of each lug nut is 100 ft/lbs (135 N·m). If in doubt has been lowered.
WHAT TO DO IN EMERGENCIES 411 5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are properly seated against the wheel. JUMP-STARTING If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully.
412 WHAT TO DO IN EMERGENCIES Preparations For Jump-Start The battery in your vehicle is located between the left front headlight assembly and the left front wheel splash shield. To allow jump-starting there are remote battery posts located on the left side of the engine compartment.
WHAT TO DO IN EMERGENCIES 413 WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
414 WHAT TO DO IN EMERGENCIES 4. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1.
WHAT TO DO IN EMERGENCIES 415 WARNING! 8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle. 10. Reinstall the protective cover over the remote posi5.
416 WHAT TO DO IN EMERGENCIES CAUTION! (Continued) CAUTION! the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the engine to idle with the transmission in NEUTRAL for at least one minute after every five rocking-motion cycles.
WHAT TO DO IN EMERGENCIES 417 CAUTION! WARNING! (Continued) • When “rocking” a stuck vehicle by shifting between DRIVE and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no transmission shifting occurring). explode and injure someone.
418 WHAT TO DO IN EMERGENCIES 4. Turn the ignition to the ACC or ON/RUN position, 7. Move the shift lever to the NEUTRAL position. but do not start the engine. 8. The vehicle may then be started in NEUTRAL. 5. Press and maintain firm pressure on the brake pedal. 9. Reinstall the cupholder liner. 6. Insert a screwdriver or similar tool into the access hole (at the front of the cupholder) and push and hold the override release lever forward.
WHAT TO DO IN EMERGENCIES 419 Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for this purpose, following equipment manufacturer’s instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to main structural members of the vehicle, not to bumpers or associated brackets. State and local laws regarding vehicles under tow must be observed. If you must use the accessories (wipers, defrosters, etc.
420 WHAT TO DO IN EMERGENCIES If flatbed equipment is not available, and the transmission Without The Ignition Key is operable, the vehicle may be flat towed (with all four Special care must be taken when the vehicle is towed wheels on the ground) under the following conditions: with the ignition in the LOCK/OFF position. Flatbed • The transmission must be in NEUTRAL. towing is the preferred towing method. However, if a • The towing distance must not exceed 15 mi (24 km).
MAINTAINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMPARTMENT — 2.4L . . . . . . . . . .423 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . .432 䡵 ENGINE COMPARTMENT — 3.6L . . . . . . . . . .424 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . .432 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .425 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . .433 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . .425 ▫ Air Conditioner Maintenance . . . . . . . . . . . . .
422 MAINTAINING YOUR VEHICLE ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . .448 䡵 BULB REPLACEMENT . . . . . . . . . . . . . . . . . .471 ▫ Automatic Transmission . . . . . . . . . . . . . . . .450 ▫ Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . .471 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .454 ▫ Front Turn Signal . . . . . . . . . . . . . . . . . . . . .474 ▫ Cleaning Center Console Cupholders. . . .
MAINTAINING YOUR VEHICLE 423 ENGINE COMPARTMENT — 2.
424 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.
MAINTAINING YOUR VEHICLE 425 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
426 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the “Malfunction Indicator Light (MIL).” Resolving the problem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS serviced, recently had a dead battery or a battery replacement. If the OBD II system should be determined not ready for the I/M test, your vehicle may fail the test.
MAINTAINING YOUR VEHICLE 427 3. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced • The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
428 MAINTAINING YOUR VEHICLE available which include detailed service information for MAINTENANCE PROCEDURES your vehicle. Refer to these Service Manuals before The pages that follow contain the required maintenance attempting any procedure yourself. services determined by the engineers who designed your NOTE: Intentional tampering with emissions control vehicle.
MAINTAINING YOUR VEHICLE 429 CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
430 MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill cap is replaced and tightened after adding oil.
MAINTAINING YOUR VEHICLE 431 CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty. Lubricants that do not have both, the engine oil certification mark and the correct SAE viscosity grade number should not be used. Engine Oil Viscosity – 3.
432 MAINTAINING YOUR VEHICLE station or governmental agency for advice on how and where used oil and oil filters can be safely discarded in You may use synthetic engine oils provided the recomyour area. mended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes Engine Oil Filter are followed. The engine oil filter should be replaced with a new filter Materials Added To Engine Oil at every engine oil change.
MAINTAINING YOUR VEHICLE 433 WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
434 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE 435 Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components.
436 MAINTAINING YOUR VEHICLE Protection Agency and is an ozone-saving product. How- 1. Open the glove box and remove all contents. ever, the manufacturer recommends that air conditioning 2. Push in on the sides of the glove box and lower the service be performed by authorized dealer or other door. service facilities using recovery and recycling equipment. 3. Disconnect the glove box door dampener from the slot NOTE: Use only manufacturer approved A/C system on the side of the box.
MAINTAINING YOUR VEHICLE 437 7. Install the A/C Air Filter with the arrow on the filter pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover. CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. A/C Air Filter Replacement 8. Reinstall the glove box door dampener and glove box. 6.
438 MAINTAINING YOUR VEHICLE MOPAR® Spray White Lube to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function.
MAINTAINING YOUR VEHICLE 439 reservoir with windshield washer solvent (not radiator Exhaust System antifreeze) and operate the system for a few seconds to The best protection against carbon monoxide entry into flush out the residual water. the vehicle body is a properly maintained engine exhaust When refilling the washer fluid reservoir, apply some system. washer fluid to a cloth or towel and wipe the wiper If you notice a change in the sound of the exhaust system; blades clean.
440 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information. • A hot exhaust system can start a fire if you park over materials that can burn.
MAINTAINING YOUR VEHICLE 441 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
442 MAINTAINING YOUR VEHICLE Coolant Checks Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator.
MAINTAINING YOUR VEHICLE 443 Cooling System – Drain, Flush, And Refill If the engine coolant (antifreeze) is dirty or contains visible sediment, have an authorized dealer clean and flush with OAT coolant (antifreeze) (conforming to MS12106). Refer to the “Maintenance Schedule” for the proper maintenance intervals. Selection Of Coolant Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information.
444 MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator. • This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended.
MAINTAINING YOUR VEHICLE 445 (antifreeze) solution. The use of lower quality water The cap should be inspected and cleaned if there is any will reduce the amount of corrosion protection in the accumulation of foreign material on the sealing surfaces. engine cooling system. Please note that it is the owner’s responsibility to maintain the proper level of protection against freezing according to the temperatures occurring in the area where the vehicle is operated.
446 MAINTAINING YOUR VEHICLE Six-Cylinder Engines – the level of the engine coolant (antifreeze) in the pressurized coolant bottle should be Used ethylene glycol-based engine coolant (antifreeze) is between the “COLD” and “FULL” range on the bottle a regulated substance requiring proper disposal. Check when the engine is cold. with your local authorities to determine the disposal rules for your community.
MAINTAINING YOUR VEHICLE 447 • If frequent engine coolant (antifreeze) additions are required, the cooling system should be pressure tested NOTE: When the vehicle is stopped after a few miles/ for leaks. kilometers of operation, you may observe vapor coming from the front of the engine compartment.
448 MAINTAINING YOUR VEHICLE result in unsatisfactory engine coolant (antifreeze) Master Cylinder – Brake Fluid Level Check performance, poor gas mileage, and increased emis- Check the fluid level in the master cylinder immediately sions. if the brake system warning light indicates system failure. Brake System In order to assure brake system performance, all brake Check the fluid level in the master cylinder when persystem components should be inspected periodically. forming underhood services.
MAINTAINING YOUR VEHICLE 449 Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. WARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance.
450 MAINTAINING YOUR VEHICLE WARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Automatic Transmission Selection Of Lubricant NOTE: No chemical flushes should be used in any transmission; only the approved lubricant should be used.
MAINTAINING YOUR VEHICLE 451 Automatic Transmission Fluid (ATF) is an engineered 2. Run the engine at normal idle speed for at least 60 seconds, and leave the engine running for the rest of product and its performance may be impaired by supplethis procedure. mental additives. Therefore, do not add any fluid additives to the transmission. The only exception to this 3. Fully apply the parking brake, and press the brake policy is the use of special dyes for diagnosing fluid pedal. leaks.
452 MAINTAINING YOUR VEHICLE cannot be held comfortably between the fingertips. transmission before rechecking the fluid level. Cold fluid is at a temperature of approximately 80° F 8. Check for leaks. Release the parking brake. (27° C). To prevent dirt and water from entering the transmission 7. Wipe the dipstick clean and reinsert it until seated. after checking or replenishing fluid, make sure that the Then, remove the dipstick and note the fluid level on dipstick cap is properly reseated. both sides.
MAINTAINING YOUR VEHICLE 453 CAUTION! (Continued) • Dirt and water in the transmission can cause serious damage. To prevent dirt and water from entering the transmission after checking or replenishing fluid, make sure that the dipstick cap is re-seated properly. Fluid Level Check – Six-Speed Transmission an improper fluid level can cause severe transmission damage. CAUTION! • If a transmission fluid leak occurs, visit your authorized dealer immediately. Severe transmission damage may occur.
454 MAINTAINING YOUR VEHICLE Appearance Care And Protection From Corrosion What Causes Corrosion? Protection Of Body And Paint From Corrosion Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. Vehicle body care requirements vary according to geographic locations and usage. Chemicals that make roads passable in snow and ice and those that are sprayed on trees and road surfaces during other seasons are highly corrosive to the metal in your vehicle.
MAINTAINING YOUR VEHICLE 455 • If insects, tar, or other similar deposits have accumu- Special Care lated on your vehicle, use MOPAR® Super Kleen Bug • If you drive on salted or dusty roads or if you drive and Tar Remover to remove. near the ocean, hose off the undercarriage at least once a month. • Use a high quality cleaner wax, such as MOPAR® Cleaner Wax to remove road film, stains and to protect • It is important that the drain holes in the lower edges your paint finish.
456 MAINTAINING YOUR VEHICLE • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use MOPAR® Touch Up Paint on scratches as soon as possible. Your authorized dealer has touch up paint to match the color of your vehicle.
MAINTAINING YOUR VEHICLE 457 To minimize the possibility of scratching the lenses and • For grease stains, apply MOPAR® Multi-Purpose Cleaner to a clean, damp cloth and remove stain. Use reducing light output, avoid wiping with a dry cloth. To a fresh, damp towel to remove soap residue. remove road dirt, wash with a mild soap solution followed by rinsing. • Do not use any harsh solvents or any other form of protectants on Stain Repel products.
458 MAINTAINING YOUR VEHICLE if absolutely necessary. Do not use harsh cleaners or Armor All®. Use MOPAR® Total Clean or equivalent to clean vinyl upholstery Cleaning Leather Upholstery WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. MOPAR® Total Clean or equivalent is specifically recomGlass Surfaces mended for leather upholstery.
MAINTAINING YOUR VEHICLE 459 Cleaning Plastic Instrument Cluster Lenses Replace the belts if they appear frayed or worn or if the buckles do not work properly. The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care Cleaning Center Console Cupholders must be taken to avoid scratching the plastic. Removal 1. Clean with a wet soft rag.
460 MAINTAINING YOUR VEHICLE Installation CAUTION! (Continued) Align the liner in the cupholder and press down firmly. Convertible Top Care CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: • Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force past the weather strips. • Remove any standing water from the top and dry the surface before opening it.
MAINTAINING YOUR VEHICLE 461 CAUTION! CAUTION! Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force water past the weather strips. Never use an abrasive type cleaner or bleaches. Cleaners should not contain silicones, organic solvents, petroleum distillates, or plasticizers. Always wait until the top is thoroughly dry before lowering it into the storage area.
462 MAINTAINING YOUR VEHICLE Additional Cleaning Procedure For additional cleaning assistance in removing stubborn stains, apply MOPAR® Convertible Cloth Top Cleaner or equivalent to the complete stain, extending 2 inches (50 mm) beyond the stain. With a soft bristle brush, scrub in all directions over the stain. Avoid heavy scrubbing. Rinse the area with warm water. If the stain is still apparent, repeat the cleaning procedure. When the stain is no longer showing, rinse the complete top with warm water.
MAINTAINING YOUR VEHICLE 463 FUSES WARNING! WARNING! • When replacing a blown fuse, always use an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material. Failure to use proper fuses may result in serious personal injury, fire and/or property damage.
464 MAINTAINING YOUR VEHICLE Integrated Power Module The Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover. Refer to the graphic below for FUSES/TIPM location.
MAINTAINING YOUR VEHICLE 465 2 Cartridge Fuse — 3 — Cavity 4 — 5 — 6 — Mini Fuse 20 Amp Yellow 10 Amp Red 10 Amp Red 20 Amp Yellow 10 Amp Red Description Brake Vacuum Pump Center High Mounted Stop Light (CHMSL)/ Brake Switch Ignition Switch Trailer Tow – If Equipped Power Mirror Switch/Climate Controls 7 Cartridge Fuse — 8 — 9 40 Amp Green 10 — Cavity 11 — Mini Fuse 30 Amp Green 30 Amp Green 20 Amp Yellow 15 Amp Lt Blue Description Ignition Off Draw (IOD) Sense 1 Ignition Off Dra
466 MAINTAINING YOUR VEHICLE 12 Cartridge Fuse — 13 — 14 — 15 40 Amp Green — Cavity 16 Mini Fuse Description 20 Amp Yellow 20 Amp Yellow 10 Amp Red — — Radiator Fan Relay 15 Amp Lt. Blue Sunroof – If Equipped Ignition/Cigar Lighter Instrument Panel Cavity 17 18 Cartridge Fuse — 19 40 Amp Green — 20 — 21 — Mini Fuse 10 Amp Red — 20 Amp Yellow 15 Amp Lt.
MAINTAINING YOUR VEHICLE 467 22 Cartridge Fuse — 23 — 24 — 25 — 26 — Cavity Mini Fuse 10 Amp Red 15 Amp Lt. Blue 25 Amp Natural 10 Amp Red 15 Amp Lt.
468 MAINTAINING YOUR VEHICLE Cavity 30 31 32 33 Cartridge Fuse — — 30 Amp Pink — Mini Fuse 20 Amp Yellow — — 10 Amp Red Description Cavity Ignition Run – Heated Seats – If Equipped Spare Auto Shutdown (ASD) Relay 1 Switch Bank/ Diagnostic Link Connector/ Powertrain Control Module (PCM) 34 35 Cartridge Fuse 30 Amp Pink 40 Amp Green Mini Fuse — — Description Anti-Lock Brakes (ABS) Module – If Equipped/ Electronic Stability Control (ESC) Module – If Equipped Anti-Lock Brakes (ABS) Module – If Eq
MAINTAINING YOUR VEHICLE 469 Cavity 36 37 Cartridge Fuse 30 Amp Pink — Mini Fuse — 25 Amp Natural Description Passenger Door Module (PDM)/ Driver Door Module (DDM) Power Top Module – If Equipped CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure.
470 MAINTAINING YOUR VEHICLE VEHICLE STORAGE REPLACEMENT BULBS If you will not be using your vehicle for more than 21 days, you may want to take steps to preserve your Interior Bulbs Bulb Number battery. 578/W5W • Disengage the mini-fuse in the Power Distribution Front Courtesy/Reading Lamp Center labeled IOD (Ignition Off-Draw). Center Courtesy/Reading 578/W5W • Or disconnect the negative cable from the battery. Lamp • Anytime you store your vehicle, or keep it out of Visor Vanity Lamp A6220 service (i.
MAINTAINING YOUR VEHICLE 471 Exterior Bulbs Bi-Halogen Headlamp Front Turn Signal Lamp Front Park Lamp Front Fog Lamp Center High Mounted Stop (CHMSL) Lamp Rear Tail/Stop/Turn Signal Lamp Backup Lamp License Lamp BULB REPLACEMENT Bulb Number HIR2 3157NAK LED (Serviced at Authorized Dealer) H11 LED (Serviced at Authorized Dealer) LED (Serviced at Authorized Dealer) 921 W5W NOTE: Lens fogging can occur under certain atmospheric conditions.
472 MAINTAINING YOUR VEHICLE 2. To begin removal of the driver side headlamp, reach in To begin removal of the passenger side headlamp, reach through the inner fender headlamp access door and in through the inner fender headlamp access door and grasp the bulb cover. grasp the bulb cover.
MAINTAINING YOUR VEHICLE 473 3. Rotate bulb cover and one-quarter turn and pull 4. Rotate bulb and connector one-quarter turn and pull outward from assembly. outward from assembly. 7 CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
474 MAINTAINING YOUR VEHICLE 5. Pull the bulb out of the socket and replace the bulb. 8. Place bulb cover back and rotate one-quarter turn clockwise to secure. Front Turn Signal 1. Raise and prop open the hood. 2. Rotate the bulb’s electrical connector one-quarter turn counterclockwise and remove it from the headlamp housing. 3. Remove the bulb from the connector socket and install the replacement bulb. 6.
MAINTAINING YOUR VEHICLE 475 Front Fog Lamp NOTE: Access to the lamps through the lower fascia cutout is limited. We recommend you access the lamps by turning the steering wheel to allow access and remove the inner fender shield. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 1.
476 MAINTAINING YOUR VEHICLE 2. Remove the two plastic wing nuts from the tail lamp 3. Grasp the tail lamp by both the outboard and inboard housing. sides, and pull firmly to disengage the tail lamp from the vehicle. NOTE: It is normal to hear a loud sound when the lower tail lamp area unsnaps from the vehicle mounting bracket during tail lamp removal.
MAINTAINING YOUR VEHICLE 477 4. Twist and remove socket from lamp. License Plate Lamp 5. Remove bulb from socket and replace. 1. Using a small screwdriver, press inward the locking tab on the side of the lamp assembly and pull down on the lamp assembly for removal. 6. Reinstall the tail lamp, fasteners, and trunk liner. 2. Pull bulb from socket, replace, and reinstall the lamp assembly into place ensuring the locking tab is secure. FLUID CAPACITIES Fuel (Approximate) All Engines — (Except 2.
478 MAINTAINING YOUR VEHICLE U.S. Cooling System* 2.4L Engine (MOPAR® Antifreeze/Engine Coolant 10 7.7 Quarts Year/150,000 Mile Formula or equivalent) 3.6L Engine (MOPAR® Antifreeze/Engine Coolant 10 11.6 Quarts Year/150,000 Mile Formula or equivalent) * Includes heater and coolant recovery bottle filled to MAX level. Metric 7.
MAINTAINING YOUR VEHICLE 479 Component Engine Oil – 2.4L Engine Engine Oil – 3.6L Engine Engine Oil Filter Spark Plugs – 2.4L Engine except PZEV* Spark Plugs – 2.4L with PZEV* Fluid, Lubricant, or Genuine Part We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade.
480 MAINTAINING YOUR VEHICLE Component Spark Plugs – 3.6L Engine Fuel Selection * PZEV = Partial Zero Emission Vehicle Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Spark Plugs (Gap 0.043 in [1.1 mm]). 87 Octane Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part Use only ATF+4® Automatic Transmission Fluid. Failure to use ATF+4® fluid may affect the function or performance of your transmission.
M A I N T E N A ▫ Maintenance Chart. . . . . . . . . . . . . . . . . . . . .484 N C E MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE . . . . . . . . . . . . .
M A I N T E N A N C E S C H E D U L E S 8 482 MAINTENANCE SCHEDULES your authorized dealer, the message can be reset by referring to the steps described under “Electronic Vehicle InforYour vehicle is equipped with an automatic oil change mation Center (EVIC)/Oil Change Required” in “Underindicator system. The oil change indicator system will standing Your Instrument Panel” for further information. remind you that it is time to take your vehicle in for scheduled maintenance.
MAINTENANCE SCHEDULES 483 M Required Maintenance Intervals. Refer to the maintenance schedules on the following page for the required maintenance intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System: • Change oil and filter. • Rotate the tires. Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. • Inspect battery and clean and tighten terminals as required.
8 Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals and replace if necessary. Inspect the brake linings, replace as necessary.
Additional Maintenance Replace engine air filter. Replace cabin/air conditioning filter. Replace spark plugs (2.4L Engine). ** Replace spark plugs (2.4L PZEV Engine Only). ** Replace spark plugs (3.6L Engine).
S C H E D U L E S 8 Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Change automatic transmission fluid and filter if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing. Change automatic transmission fluid and filter. Inspect and replace PCV valve if necessary.
MAINTENANCE SCHEDULES 487 M WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . .491 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY). . . . . . . . . . . . . . . . . . .493 ▫ Prepare For The Appointment. . . . . . . . . . . . .491 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . .493 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . .491 䡵 WARRANTY INFORMATION . . . . . . . . . . . . .
490 IF YOU NEED CONSUMER ASSISTANCE 䡵 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES . . . . . . . . . . . . . . . . .497 ▫ Treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .497 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . .497 ▫ Temperature Grades. . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 491 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment Be Reasonable With Requests If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with the service advisor and list the items in order of priority. At many authorized dealer, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it is advisable to make these arrangements when you call for an appointment.
492 IF YOU NEED CONSUMER ASSISTANCE facilities, factory-trained technicians, special tools, and • Owner’s telephone number (home and office) the latest information to ensure the vehicle is fixed • Authorized dealer name correctly and in a timely manner. • Vehicle Identification Number (VIN) This is why you should always talk to an authorized dealer service manager first. Most matters can be re- • Vehicle delivery date and mileage solved with this process.
IF YOU NEED CONSUMER ASSISTANCE 493 Mexico, D. F. Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered by Bell Canada. For TTY teletypewriter users, dial 711 and for Voice callers, dial 1 800 855-0511 to connect with a Bell Relay Service operator.
494 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract. If you purchased a service contract that is not a manufacturer’s service contract, and you require service after the manufacturer’s New Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in those documents.
IF YOU NEED CONSUMER ASSISTANCE 495 campaign. However, NHTSA cannot become involved in individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recommended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– operating at its best. 9153), or go to http://www.safercar.
496 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations.
IF YOU NEED CONSUMER ASSISTANCE 497 Call toll free at: Treadwear • 1–800–890–4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
498 IF YOU NEED CONSUMER ASSISTANCE concrete. A tire marked C may have poor traction perfor- passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A repremance. sent higher levels of performance on the laboratory test wheel, than the minimum required by law. WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
INDEX 10
500 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . .327 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . . .329 Accessory Delay, Power. . . . . . . . . . . . . . . . . . . . . .12 Adding Engine Coolant (Antifreeze) . . . . . . . . . . . .444 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .379 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . .438 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .373 Airbag. . . . . . . . . .
INDEX 501 Automatic Transmission . . . . . . . . . . . . . . . . . . . .303 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . . . .451 Fluid and Filter Changes . . . . . . . . . . . . . . . . . .453 Fluid Level Check . . . . . . . . . . . . . . . . . . . . . . .451 Fluid Type . . . . . . . . . . . . . . . . . . . . . . . . . . . .450 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . .306 Special Additives . . . . . . . . . . . . . . . . . . . . . . .450 Autostick . . . . . . . . . .
502 INDEX Certification Label. . . . . . . . . . . . . . . . . . . . . . . . .382 Chains, Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . .360 Changing A Flat Tire . . . . . . . . . . . . . . . . . . . . . . .400 Chart, Tire Sizing . . . . . . . . . . . . . . . . . . . . . . . . .339 Check Engine Light (Malfunction Indicator Light) . .426 Checking Your Vehicle For Safety . . . . . . . . . . . . . . .92 Checks, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 Child Restraint . .
INDEX 503 Pressure Cap . . . . . . . . . . . . . . Radiator Cap . . . . . . . . . . . . . . Selection of Coolant (Antifreeze) . Corrosion Protection . . . . . . . . . . . Cruise Light . . . . . . . . . . . . . . . . . Cupholders . . . . . . . . . . . . . . . . . Customer Assistance . . . . . . . . . . . Customer Programmable Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
504 INDEX Electronic Speed Control (Cruise Control) . . . . . . . .189 Electronic Stability Control (ESC) . . . . . . . . . . . . . .333 Electronic Vehicle Information Center (EVIC) . . . . . .235 Emergency, In Case of Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .400 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . .411 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .418 Emission Control System Maintenance . . . . . . . . . .426 Engine . . . . . . .
INDEX 505 Exterior Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Fabric Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .457 Filler Location Fuel . . . . . . . . . . . . . . . . . . . . . . . .218 Filters Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . .432 Air Conditioning . . . . . . . . . . . . . . . . . . . . . . .295 Automatic Transmission . . . . . . . . . . . . . . . . . .453 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . .
506 INDEX Filler Cap (Gas Cap) . Filler Door (Gas Cap) Gasoline . . . . . . . . . . Gauge . . . . . . . . . . . Light . . . . . . . . . . . . Materials Added . . . . Methanol . . . . . . . . . Octane Rating . . . . . . Requirements . . . . . . Tank Capacity . . . . . . Fuel, Flexible . . . . . . . . Fueling . . . . . . . . . . . . Fuel System Caution . . . Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 507 Bulb Replacement . . . . . . . . . . . . . . . . . . . . Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . High Beam . . . . . . . . . . . . . . . . . . . . . . . . . High Beam/Low Beam Select Switch . . . . . . On With Wipers . . . . . . . . . . . . . . . . . . . . . Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing . . . . . . . . . . . . . . . . . . . . . . . . . . Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . Head Restraints . . . . . . . . .
508 INDEX Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Jacking Instructions . Jack Location . . . . . Jack Operation . . . . Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .402 .400 .400 .411 Key-In Reminder . . . . . . Keyless Entry System . . . Key, Programming . . . . . Key, Replacement . . . . . .
INDEX 509 Fog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . .178 Headlights On With Wipers . . . . . . . . . . . . . . . .179 Headlight Switch . . . . . . . . . . . . . . . . . . . . . . .178 High Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 High Beam Indicator . . . . . . . . . . . . . . . . . . . . .232 High Beam/Low Beam Select . . . . . . . . . . . . . . .180 Illuminated Entry . . . . . . . . . .
510 INDEX Maintenance Free Battery. . . . . . . . . . . . . . . . . . . .433 Maintenance Procedures . . . . . . . . . . . . . . . . . . . .428 Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . .482 Malfunction Indicator Light (Check Engine). . . . . . .230 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . .496 Map/Reading Lights . . . . . . . . . . . . . . . . . . . . . . .183 Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . . .448 Memory Feature (Memory Seat) . . .
INDEX 511 Passenger Seat Back Tilt (Easy Entry System). . . . . .171 Passing Light . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Personal Settings. . . . . . . . . . . . . . . . . . . . . . . . . .244 Pets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 Phone, Cellular . . . . . . . . . . . . . . . . . . . . . . . . . . .128 Phone, Hands-Free (Uconnect®) . . . . . . . . . . . . . . .128 Placard, Tire and Loading Information . . . . . . . . . .
512 INDEX Remote Control Pretensioners Security Alarm . . . . . . . . . . . . . . . . . . . . . . . . . .18 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Starting System . . . . . . . . . . . . . . . . . . . . . . . . .28 Programmable Electronic Features . . . . . . . . . . . . .244 Programming Transmitters (Remote Keyless Entry) . .21 Remote Keyless Entry (RKE) . . . . . . . . . . . . . . . . . .21 Remote Sound System (Radio) Controls . . . . . . . . .280 Radial Ply Tires . . .
INDEX 513 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . . .95 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . . .495 Safety, Exhaust Gas. . . . . . . . . . . . . . . . . . . . . . . . .92 Safety Information, Tire . . . . . . . . . . . . . . . . . . . . .338 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 Satellite Radio Antenna . . . . . . . . . . . . . . . . . . . . .270 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . .
514 INDEX Settings, Personal . . . . . . . . . . . . . . . . . . . . . . . . .244 Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . .247 Shift Lever Override . . . . . . . . . . . . . . . . . . . . . . .417 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Side Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Side Window Demisters (Defrosters) . . . . . . . . . . . .295 Signals, Turn . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 515 Time Delay, Headlight . . . . . . . . . . . . . . . . . . . . . .179 Tip Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302 Tire and Loading Information Placard . . . . . . . . . . .344 Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . .338 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Aging (Life of Tires) . . . . . . . . . . . . . . . . . . . . .358 Air Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . .
516 INDEX Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .387 Towing Assistance. . . . . . . . . . . . . . . . . . . . . . . . .143 Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .321 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . .384 Cooling System Tips . . . . . . . . . . . . . . . . . . . . .394 Hitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .386 Minimum Requirements . . . . . . . . . . . . . . . . . .389 Tips . . . . .
INDEX 517 Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . .241 Vehicle Certification Label . . . . . . . . . . . . . . . . . . .382 Vehicle Identification Number (VIN) . . . . . . . . . . . . .6 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . . . . .345 Vehicle Modifications/Alterations . . . . . . . . . . . . . . .7 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . . . . .294 Vehicle Theft Alarm (Security Alarm) . . . . . . . . . . . .18 Viscosity, Engine Oil . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2014 200 Convertible 2014 OWNER’S MANUAL Chrysler Group LLC 14C27-126-AA First Edition Printed in U.S.A.
