User Guide

Mist

• Push the end of the lever inward to the first detent when a single wipe is desired.

NOTE:

The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on

the windshield. The wash function must be activated in order to spray the windshield with washer

fluid.

Washer Operation

• Push the end of the lever inward to the second detent and hold for as long as spray is desired.

Rear Wiper

• Rotate the center portion of the lever forward to the first detent for rear wiper operation.

Rear Washer

• Rotate the center portion of the lever past the first detent to activate the rear washer.

High Beams

• Push the lever away from you to activate the high beams.

• A high beam symbol will illuminate in the cluster to indicate the high beams are on.

NOTE:

For safe driving, turn off the high beams when oncoming traffic is present to prevent headlight

glare and as a courtesy to other motorists.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain on until the

lever is released.

OPERATING YOUR VEHICLE