User Guide

FRONT SEATS

Power Seat

• The power seat switch controls forward/

back, up/down, and tilt adjustment.

•

The recline switch, located on the outboard

side of the seat, controls seatback adjustment.

Power Lumbar

• Push the switch forward to increase the lum-

bar support. Push the switch rearward to

decrease the lumbar support.

Manual Seat Adjustment

Forward/Rearward

• Lift up on the adjusting bar located at the

front of the seat near the floor and release it

when the seat is at the desired position.

Then, using body pressure, move forward

and backward on the seat to be sure that the

seat adjusters have latched.

Recliner

• Lift the recliner lever located on the out-

board side of the seat, lean back and release

at the desired position.

Memory Seat

• The memory seat feature allows you to

save two different driver seating positions,

driver's outside mirror, adjustable brake

and accelerator pedals, and radio station

preset settings. The memory seat buttons

are located on the driver's door panel.

• Adjust all memory profile settings, press the

SET button then press 1 or 2 within five

seconds.

• To program a Key Fob to the memory posi-

tion, press and release the LOCK button

within 10 seconds on the Key Fob to be

programmed.

• Place the ignition switch in the ON position, select Remote Linked to Memory in the

Electronic Vehicle Information Center (EVIC) and enter Yes.

• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key Fob.

GETTING STARTED