Download a FREE Vehicle Information App by visiting your application store, Keyword (Chrysler Concierge), or scanning the Microsoft Tag. To put Microsoft Tags to work for you, use your mobile phone’s browser or App store to download a Microsoft Tag reader, like the free one at www.gettag.mobi. Then follow the directions to scan the code. Get the free mobile app for your phone U.S. only http://gettag.
If you are the first registered retail owner of your vehicle, you may obtain a complimentary printed copy of the Owner’s Manual, Navigation/UCONNECT® Manuals or Warranty Booklet by calling 1-800-247-9753 (U.S.) or 1-800-387-1143 (Canada) or by contacting your dealer. The driver’s primary responsibility is the safe operation of the vehicle. Driving while distracted can result in loss of vehicle control, resulting in a collision and personal injury.
TA B L E O F CO N T E N T S INTRODUCTION/WELCOME WELCOME FROM CHRYSLER GROUP LLC . . . . . . . . . . . . . . . . . . 3 CONTROLS AT A GLANCE DRIVER COCKPIT . . . . . . . . . . . . . . . 6 INSTRUMENT CLUSTER . . . . . . . . . . . 8 GETTING STARTED KEY FOB . . . . . . . . . . . . . REMOTE START . . . . . . . . KEYLESS ENTER-N-GO™ . . . . THEFT ALARM . . . . . . . . . SEAT BELT . . . . . . . . . . . . SUPPLEMENTAL RESTRAINT SYSTEM (SRS) — AIR BAGS . . CHILD RESTRAINTS . . . . . . FRONT SEATS . . . . . . . . .
TA B L E O F CO N T E N T S CONSUMER ASSISTANCE CHRYSLER GROUP LLC CUSTOMER CENTER . . . . . . . . CHRYSLER CANADA INC. CUSTOMER CENTER . . . . . . . . ASSISTANCE FOR THE HEARING IMPAIRED . . . . . . . . . . . . . . . PUBLICATIONS ORDERING . . . . REPORTING SAFETY DEFECTS IN THE 50 UNITED STATES AND WASHINGTON, D.C. . . . . . . . . 2 MOPAR ACCESSORIES . . . . 131 AUTHENTIC ACCESSORIES BY MOPAR® . . . . . . . . . . . . . . . . . 133 . . . . 131 INDEX . . . . . . . . . . . . . . . . . . . 134 . . . .
INTRODUCTION/WELCOME WELCOME FROM CHRYSLER GROUP LLC Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. Your new Chrysler Group LLC vehicle has characteristics to enhance the driver's control under some driving conditions. These are to assist the driver and are never a substitute for attentive driving. They can never take the driver's place.
INTRODUCTION/WELCOME VEHICLES SOLD IN CANADA With respect to any vehicles sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution. WARNING! • • • • • 4 Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. Always make sure that objects cannot fall into the driver foot well while the vehicle is moving.
INTRODUCTION/WELCOME USE OF AFTERMARKET PRODUCTS (ELECTRONICS) The use of aftermarket devices including cell phones, MP3 players, GPS systems, or chargers may affect the performance of on-board wireless features including Keyless Enter-N-Go™ and Remote Start range. If you are experiencing difficulties with any of your wireless features, try disconnecting your aftermarket devices to see if the situation improves. If your symptoms persist, please see an authorized dealer.
DRIVER COCKPIT CO N T R O L S AT A G L A N C E 6
K. Power Outlets pg. 90 L. Speed Control pg. 33 F. Transmission Gear Selector G. Audio System (touch-screen-radio shown) pg. 44 R. Power Vent Windows • Electronic Stability Control J. VES/DVD Player pg. 82 Q. Power Door Locks • Power Inverter pg. 89 E. Instrument Cluster pg. 8 D. Electronic Vehicle Information Center (EVIC) Display pg. 85 P. Power Windows O. Power Mirrors • Hazard Switch • Economy Mode N. Parking Brake Release I. SWITCH PANEL B.
CO N T R O L S AT A G L A N C E INSTRUMENT CLUSTER Warning Lights - Low Fuel Warning Light - Charging System Light - Oil Pressure Warning Light - Anti-Lock Brake (ABS) Light** - Air Bag Warning Light** - Electronic Throttle Control (ETC) Light - Tire Pressure Monitoring System (TPMS) Light - Engine Temperature Warning Light - Seat Belt Reminder Light BRAKE - Brake Warning Light** - Malfunction Indicator Light (MIL)** - Electronic Stability Control (ESC) Activation/Malfunction Indicator Light* (See page 9
CO N T R O L S AT A G L A N C E Indicators - Turn Signal Indicators - High Beam Indicator - Front Fog Light Indicator - Electronic Speed Control ON Indicator - Electronic Speed Control Set Indicator - Vehicle Security Indicator* - Electronic Stability Control (ESC) Off Indicator* Odometer Messages door - Door Ajar gASCAP - Fuel Cap Fault gATE* - Liftgate Ajar LoCOOL - Low Coolant noFUSE* - Fuse Fault LoW tirE* - Low Tire Pressure CHAngE OIL* - Change Engine Oil * If equipped ** Bulb Check with Key On
G E T T I N G S TA R T E D KEY FOB Locking And Unlocking The Doors/Liftgate • Press the LOCK button once to lock all the doors and the liftgate. Press the UNLOCK button once to unlock the driver’s door only and twice within five seconds to unlock all the doors and liftgate. • All doors can be programmed to unlock on the first press of the UNLOCK button. Refer to Programmable Features in the Electronics section of this guide. Panic Alarm • Press the PANIC button once to turn the panic alarm on.
G E T T I N G S TA R T E D • In case the Key Fob battery is dead, use the emergency key to open the door. If the vehicle is equipped with Keyless Enter-N-Go™, remove the ENGINE START/STOP button by inserting the metal part of the emergency key under the chrome bezel at the 6 o’clock position and gently pry the button loose. NOTE: The ENGINE START/STOP button should only be removed or inserted with the ignition in the LOCK position (OFF position for Keyless Enter-N-Go™).
G E T T I N G S TA R T E D WARNING! • • • • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be severely injured or killed. Children should be warned not to touch the parking brake, brake pedal, or the shift lever. Do not leave the Key Fob inside the vehicle, or in a location accessible to children.
G E T T I N G S TA R T E D KEYLESS ENTER-N-GO™ • The Keyless Enter-N-Go™ system is an enhancement to the vehicle's Key Fob. This feature allows you to lock and unlock the vehicle's door(s) and liftgate without having to press the Key Fob lock or unlock buttons, as well as starting and stopping the vehicle with the press of a button. To Unlock From The Driver or Passenger Side: • With a valid Keyless Enter-N-Go™ Key Fob located outside the vehicle and within 5 ft (1.
G E T T I N G S TA R T E D • If “Unlock All Doors 1st Press” is programmed all doors and liftgate will unlock when you press the liftgate button. If “Unlock Driver Door 1st Press” is programmed only the liftgate will unlock when you press the liftgate button. To select between “Unlock Driver Door 1st Press” and “Unlock All Doors 1st Press”, refer to the Electronic Vehicle Information Center (EVIC) in your vehicles Owner's Manual on the DVD or Programmable Features in this guide for further information.
G E T T I N G S TA R T E D Engine Starting/Stopping Starting • With a valid Keyless Enter-N-Go™ Key Fob inside the vehicle. • Place the shift lever in PARK or NEUTRAL. • While pressing the brake pedal, press the ENGINE START/STOP button once. If the engine fails to start, the starter will disengage automatically after 10 seconds. • To stop the cranking of the engine prior to the engine starting, press the button again. Stopping • Bring the vehicle to a complete stop.
G E T T I N G S TA R T E D THEFT ALARM To Arm • Keyless Enter-N-Go™ button installed: Press the Keyless Enter-N-Go™ Start/Stop button until the Electronic Vehicle Information Center (EVIC) indicates that the vehicle ignition is “OFF”. Press the power door lock switch while the door is open, press the Key Fob LOCK button, or with one of the Key Fobs located outside the vehicle and within 5 ft (1.
G E T T I N G S TA R T E D SEAT BELT • Be sure everyone in your vehicle is in a seat and using a seat belt properly. • Position the lap belt across your thighs, below your abdomen. To remove slack in the lap portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. • Position the shoulder belt on your chest so that it is comfortable and not resting on your neck.
G E T T I N G S TA R T E D SUPPLEMENTAL RESTRAINT SYSTEM (SRS) — AIR BAGS • This vehicle has Advanced Front Air Bags for both the driver and right front passenger as a supplement to the seat belt restraint system. The Advanced Front Air Bags will not deploy in every type of collision. • Advanced Front Air Bags are designed to provide additional protection by supplementing the seat belts in certain frontal collisions depending on several factors, including the severity and type of collision.
G E T T I N G S TA R T E D CHILD RESTRAINTS • Children 12 years and under should ride properly buckled up in a rear seat, if available. According to crash statistics, children are safer when properly restrained in the rear seats rather than in the front. • Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. NOTE: • For additional information, refer to www.seatcheck.
G E T T I N G S TA R T E D Installing The Top Tether Strap (With Either Lower Anchors Or Vehicle Seat Belt): • Route the top tether strap under the adjustable head restraint between the steel posts. • Provide enough slack for the tether strap to reach the tether anchor located near the bottom of the seat back. • Clip tether hook to tether anchor. Ensure that the hook is firmly engaged and secure. • Remove all slack and tighten tether strap according to child restraint manufacturer’s instructions.
G E T T I N G S TA R T E D FRONT SEATS Power Seat • The power seat switch controls forward/ back, up/down, and tilt adjustment. • The recline switch, located on the outboard side of the seat, controls seatback adjustment. Power Lumbar • Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lumbar support.
G E T T I N G S TA R T E D CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. WARNING! • • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted, and you could be severely injured or killed.
G E T T I N G S TA R T E D • Pull upward on the seatback recliner lever located on the outboard side of the seat. • The non-adjustable head restraint and seatback will fold automatically during the seat tumble. • The seat will automatically tumble into position for easy storage. • Push the seat into the storage bin and close the storage bin cover. To Unstow Second Row Seats • Pull up on the storage bin latch to open the cover.
G E T T I N G S TA R T E D Third Row Seats Third Row Power Recliner • The power recline feature, located on the side of the seat cushion, adjusts the seatback angle forward/rearward for occupant comfort. Third Row Power Seat Switch NOTE: • Disconnect the center shoulder belt from the small buckle and lower the head restraints before attempting to fold/stow the power third row seats. • A one-touch power folding seat switch is located in the left rear trim panel as part of a switch bank.
G E T T I N G S TA R T E D Manually Folding Third Row Seats • Lower the center head restraint down to the seatback by pushing the button on the guide and pushing the head restraint down. • Lower the outboard head restraints by pulling on the release strap marked “1” located on the outboard side of the head restraint. • Pull release strap marked “2” located on the rear of the seat to lower the seatback. • Pull release strap marked “3” to release the anchors.
G E T T I N G S TA R T E D CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. WARNING! • • In a collision, serious injury could result if the seat storage bin covers are not properly latched. • Do not drive the vehicle with the storage bin covers open. • Keep the storage bin covers closed and latched while the vehicle is in motion. • Do not use a storage bin latch as a tie down.
G E T T I N G S TA R T E D WARNING! • • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical conditions must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat.
G E T T I N G S TA R T E D WARNING! Do not adjust the steering wheel while driving. The tilt adjustment must be locked while driving. Adjusting the steering wheel while driving or driving without the tilt adjustment locked could cause the driver to lose control of the vehicle. Failure to follow this warning may result in you and others being severely injured or killed.
O P E R AT I N G YO U R V E H I C L E ENGINE BREAK-IN RECOMMENDATIONS • A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. • Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. • While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in.
O P E R AT I N G YO U R V E H I C L E TURN SIGNAL /WIPER/WASHER/HIGH BEAM LEVER Turn Signal/Lane Change Assist • Tap the lever up or down once and the turn signal (right or left) will flash three times and automatically turn off. • Vehicles equipped with Blind Spot Monitoring will produce a visual alert and may be programmed to produce an audible alert when signaling a lane change; refer to your Owner’s Manual on the DVD for operation.
O P E R AT I N G YO U R V E H I C L E Mist • Push the end of the lever inward to the first detent when a single wipe is desired. NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be activated in order to spray the windshield with washer fluid. Washer Operation • Push the end of the lever inward to the second detent and hold for as long as spray is desired.
O P E R AT I N G YO U R V E H I C L E HEADLIGHT SWITCH AND HALO LIGHT SWITCH Automatic Headlights/Parking Lights/Headlights • Rotate the headlight switch, located on the instrument panel to the left of the steering wheel, to the first detent for parking and to the second detent for lights . headlights • With the parking lights or low beam headlights on, push the headlight switch once for fog lights. • Rotate the headlight switch to “AUTO” for AUTO headlights.
O P E R AT I N G YO U R V E H I C L E SPEED CONTROL • The Speed Control switches are located on the steering wheel. Cruise ON/OFF • Push the ON/OFF button to activate the Speed Control. will appear on the instrument • CRUISE cluster to indicate the Speed Control is on. • Push the ON/OFF button a second time to turn the system off. SET • With the Speed Control on, push and release the SET – button to set a desired speed.
O P E R AT I N G YO U R V E H I C L E ELECTRONIC RANGE SELECTION (ERS) • Electronic Range Select (ERS) allows you to limit the highest available transmission gear, and can be activated during any driving condition. When towing a trailer or operating the vehicle in off-road conditions, using ERS shift control will help you maximize both performance and engine braking. • To shift from DRIVE mode to ERS mode, move the shift lever to the left (-) once. The current gear will be maintained as the top gear.
O P E R AT I N G YO U R V E H I C L E FUEL ECONOMY (ECON) MODE • The Fuel Economy (ECON) mode can improve the vehicle’s overall fuel economy during normal driving conditions. • Press the “econ” switch in the center stack of the instrument panel and a green light will indicate the ECON mode is engaged. • When the Fuel Economy (ECON) Mode is engaged, the vehicle control systems will be able to change the following: • The transmission will upshift sooner and downshift later.
O P E R AT I N G YO U R V E H I C L E MANUAL CLIMATE CONTROLS Air Recirculation • • • • Use Recirculation for maximum A/C operation. For window defogging, turn the recirculation button off. Recirculation is allowed in floor mode. Recirculation is allowed in defrost/floor (mix modes) for approximately five minutes. Heated Mirrors • The mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster.
O P E R AT I N G YO U R V E H I C L E Air Recirculation • Use Recirculation for maximum A/C operation. • For window defogging, turn the recirculation button off. • Recirculation is allowed in floor mode. • Recirculation is allowed in defrost/floor (mix modes) for approximately five minutes. Heated Mirrors • The mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster.
O P E R AT I N G YO U R V E H I C L E THREE ZONE AUTOMATIC TEMPERATURE CONTROLS (ATC ) Automatic Operation • Push the AUTO mode button to activate the ATC system. • Select the desired temperature by pressing the temperature control buttons for the driver or passenger. • The system will maintain the set temperature automatically. Air Conditioning (A/C) • If the air conditioning button is pressed while in AUTO mode, the system will exit AUTO mode and stay in A/C.
O P E R AT I N G YO U R V E H I C L E Heated Mirrors • The mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster. Rear Window Defroster • Pressing the rear window defroster button will turn on the defroster for approximately 10 minutes. An indicator in the button will illuminate when the rear window defroster is on. For an additional ten minutes of operation, press the button a second time.
O P E R AT I N G YO U R V E H I C L E PARKSENSE® REAR PARK ASSIST • If an object is detected behind the rear bumper while the vehicle is in REVERSE, a warning will display in the instrument cluster and a tone will sound, (closer the object the faster the tone) that changes speed depending on the distance of the object from the bumper, will sound. • When the Instrument Cluster reads either “Clean Sensor” or “Blinded”, clean off the bumper sensors to see if the condition is corrected.
O P E R AT I N G YO U R V E H I C L E POWER SLIDING SIDE DOORS Automatic/Manual Operation • The power sliding door may be opened or closed manually or by using the buttons on the Key Fob, overhead console switch, or rear door switch. • Pulling the inside or outside power sliding door handle will also power open the power sliding doors.
O P E R AT I N G YO U R V E H I C L E POWER SUNROOF Manual Open/Close • Press and hold the switch rearward to open or forward to close the sunroof. Any release of the switch will stop the movement, and the sunroof will remain in a partially open or closed position until the switch is pressed again. Pinch Protection Feature • This feature will detect an obstruction in the opening of the sunroof during Express Close operation.
O P E R AT I N G YO U R V E H I C L E WARNING! • • • Never leave children unattended in a vehicle, and do not leave the key in the ignition switch (or leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/Run position). Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
ELECTRONICS YOUR VEHICLE'S SOUND SYSTEM 44
ELECTRONICS 45
ELECTRONICS Uconnect® 130 NOTE: Your radio has many features that add to the comfort and convenience of you and your passengers. Some of these radio features should not be used when driving because they take your eyes from the road or your attention from driving. Clock Setting • Press and hold the “TIME” button until the hours blink; turn the “TUNE/ SCROLL” control knob to set the hours.
ELECTRONICS Radio Operation Seek Up/Down Buttons • Press to seek through radio stations in AM or FM bands. • Hold either button to bypass stations without stopping. Store Radio Presets • Press the “SET/RND” button once and SET 1 will show in the display. Then select button (1–6). • A second station may be added to each push button. Press the “SET/RND” button twice and SET 2 will show in the display. Then select button (1–6). CD/DISC Operation Seek Up/Down Buttons • Press to seek through CD tracks.
ELECTRONICS Uconnect® 130 WITH SiriusXM SATELLITE RADIO NOTE: • Your radio may not be equipped with the Uconnect® Voice Command and Uconnect® Phone features. To determine if your radio has these features, press the Voice Command button on the radio. You will hear a voice prompt if you have the feature, or see a message on the radio stating “Uconnect Phone not available” if you do not. • Your radio has many features that add to the comfort and convenience of you and your passengers.
ELECTRONICS Radio Operation Seek Up/Down Buttons • Press to seek through radio stations in AM, FM, or SAT bands. • Hold either button to bypass stations without stopping. Store Radio Presets • Press the “SET/RND” button once and SET 1 will show in the display. Then select button (1–6). • A second station may be added to each push button. Press the “SET/RND” button twice and SET 2 will show in the display. Then select button (1–6). Music Type • Press the “MUSIC TYPE” button to activate this mode.
ELECTRONICS CD/DISC Operation Seek Up/Down Buttons • Press to seek through CD tracks. • Hold either button to bypass tracks without stopping. SET/RND Button (Random Play) • Press this button while the CD is playing to activate Random Play. • This feature plays the selections on the CD in random order to provide an interesting change of pace. LIST Button • Press the “LIST” button to bring up a list of all folders on the CD. Scroll up or down the list by turning the “TUNE/SCROLL” control knob.
ELECTRONICS Uconnect® 430/430N NOTE: • Your radio may not be equipped with the Uconnect® Voice Command and Uconnect® Phone features. To determine if your radio has these features, press the Voice Command button on the radio. You will hear a voice prompt if you have the feature, or see a message on the radio stating “Uconnect Phone not available” if you do not. • Your radio has many features that add to the comfort and convenience of you and your passengers.
ELECTRONICS Menu • Press the “MENU” hard-key to access the System Setup menu and the My Files menu. • Press the “MENU” hard-key in an active mode (SAT, CD, AUX, etc.) to change mode specific settings. Equalizer, Balance And Fade Audio Control Menu • Press the “AUDIO” hard-key on the right side of the radio. • Use either the arrow soft-keys or the crosshair on the screen to change Balance and Fade. The “CENTER” soft-key resets the settings.
ELECTRONICS Radio Operation • To access Radio Mode, touch the “RADIO” hard-key on the left side of the faceplate, then touch the “AM,” “FM” or “SAT” soft-key at the top of the screen to select the band. Seek Up/Seek Down • Press the “Seek Up” or “Seek Down” soft-keys to seek through radio stations in AM, FM, or SAT bands. Hold either Seek to bypass stations without stopping. Store Radio Presets • Select the radio band by touching either the “AM,” “FM,” or “SAT” soft-key.
ELECTRONICS CD/DVD Disc Operation • Press the “MEDIA” hard key to display the media source tabs at the top of the screen. Select the source by touching the “HDD,” “DISC,” or “AUX” media source soft-key tab. NOTE: Your Touch-Screen Radio will usually automatically switch to the appropriate mode when something is first connected or inserted into the system. Insert a CD/DVD Disc • To insert a disc, press the “LOAD” hard-key. • With the printed side upwards, insert the disc into the disc slot of the radio.
ELECTRONICS Audio Jack Operation • The AUX/Audio Jack provides a means to connect a portable audio device, such as an MP3 player or an iPod®, to the vehicles sound system. This requires the use of a 3.5 mm stereo audio patch cable. • Pressing the “MEDIA” hard-key and then the “AUX” soft-key to change the mode to auxiliary device if the Audio Jack is connected, allowing the music from your portable device to play through the vehicle's speakers.
ELECTRONICS Copying Music From USB • The USB port on the radio face plate allows you to copy files to your hard drive. To access, lift up on the cover. • Insert a USB device (e.g. thumb drive or memory stick), then select “MY MUSIC soft-key.” • Touch the “Add Music Files to HDD” soft-key, then touch the “Front USB” soft-key in the next screen. • Select the folders or titles you would like to copy, then touch the “DONE” soft-key to start the copy process.
ELECTRONICS Playing Music From The HDD • Press the “MEDIA” hard key to display the media source tabs at the top of the screen. Touch the “HDD” soft-key tab. Touch the desired track soft-key to play or touch the “SEARCH/ BROWSE” soft-key to search by artist, by album, by song, by genre, from a folder, or from Favorites. Cleaning Your Touch-Screen Radio • Do not spray any liquid or caustic chemicals directly on the screen. Use a clean and dry micro fiber lens cleaning cloth to clean the touch-screen.
ELECTRONICS Garmin® Navigation • Uconnect® 430N integrates Garmin’s consumer-friendly navigation into your vehicle. Garmin® Navigation includes a database with over 6 million points of interest. • Touch the “NAV” soft-key in the upper right corner of the screen to access the Navigation system. Changing the Navigation Voice Prompt Volume 1. Program a destination. 2. While traveling on your route, touch the upper left area of the map screen where your next turn is displayed. 3.
ELECTRONICS Entering A Destination Address • From the main Navigation menu touch the “Where To?” soft-key, then touch the “Address” soft-key. • Follow the on-screen prompts to enter the address then touch the “Go” soft-key. Searching Near Another Location • From the main Navigation menu touch the “Where To?” soft-key. Next, touch a destination then touch the “Near” soft-key. • Select an option from the available choices.
ELECTRONICS Following Your Route • Your route is marked with a magenta line on the map. If you depart from the original route, your route is recalculated. A speed limit icon could appear as you travel on major roadways. Adding A Via Point • To add a stop between the current location and the end destination (Via Point) you must be navigating a route. • Touch the “back arrow icon” multiple times to return to the Main Navigation menu. • Touch the “Where To?” soft-key, then search for the additional stop.
ELECTRONICS Uconnect® 730N NOTE: Your radio has many features that add to the comfort and convenience of you and your passengers. Some of these radio features should not be used when driving because they take your eyes from the road or your attention from driving. Clock Setting • Turn the radio on, then touch the screen where the time is displayed. • Touch the “USER CLOCK” soft-key. • To adjust the hours, touch either the “HOUR FORWARD” or “HOUR BACKWARD” soft-key.
ELECTRONICS Equalizer, Balance And Fade Audio Control Menu • Press the “MENU” hard-key on the right side of the radio. Then press the “Audio Control” soft-key to get to the audio control menu. • Use either the arrow soft-keys or the crosshair on the screen to change Balance and Fade. The “CENTER” soft-key resets the settings. • Touch the “Equalizer” soft-key and use either the arrow soft-keys or the sliders on the screen to adjust BASS, MID, and/or TREBLE.
ELECTRONICS Radio Operation • To access Radio Mode, touch the “RADIO/MEDIA” hard-key on the left side of the faceplate repeatedly until AM/FM/SAT appears at the top of the screen, then touch the “AM,” “FM” or “SAT” soft-key to select the band. Seek Up/Seek Down • Press the “Seek Up” or “Seek Down” hard-keys to seek through radio stations in AM, FM, or SAT bands. Hold either Seek to bypass stations without stopping.
ELECTRONICS CD/DVD Disc Operation • Press the “RADIO/MEDIA” hard key until the media source tabs are displayed at the top of the screen. Select the source by touching the “HDD,” “DISC,” or “AUX” media source soft-key tab. NOTE: Your Touch-Screen Radio will usually automatically switch to the appropriate mode when something is first connected or inserted into the system. Insert a CD/DVD Disc • To insert a disc, press the “OPEN/CLOSE” hard-key.
ELECTRONICS Audio Jack Operation • The AUX/Audio Jack provides a means to connect a portable audio device, such as an MP3 player or an iPod®, to the vehicles sound system. This requires the use of a 3.5 mm stereo audio patch cable. • Pressing the “RADIO/MEDIA” hard-key and then the “AUX” soft-key to change the mode to auxiliary device if the Audio Jack is connected, allowing the music from your portable device to play through the vehicle's speakers.
ELECTRONICS Copying Music From USB • The USB port on the radio face plate allows you to copy files to your hard drive. To access, lift up on the cover. • Insert a USB device (e.g. thumb drive or memory stick), then select “MY FILES”. • Touch the “MY MUSIC” soft-key, then touch the “Add Music Files” to HDD soft-key. • Touch the “From USB” soft-key, then select the folders or titles you would like to copy, and then touch the “SAVE” soft-key to start the copy process.
ELECTRONICS Playing Music From The HDD • Press the “RADIO/MEDIA” hard key until the media source tabs are displayed at the top of the screen. Touch the “HDD” soft-key tab. Touch the desired track soft-key to play or touch the “SEARCH/BROWSE” soft-key to search by artist, by album, by song, by genre, from a folder, or from Favorites. Cleaning Your Touch-Screen Radio • Do not spray any liquid or caustic chemicals directly on the screen.
ELECTRONICS NAVIGATION • Your navigation system receives GPS signals from up to 16 satellites to display the position of your vehicle. Map and database information is supplied through a hard disk drive. • Touch the “NAV” hard-key on the radio face plate to access the Navigation system and the NAV – Main Menu. Changing the Navigation Guidance Prompt Volume 1. From the Navigation Map screen, touch the Menu hard-key and then touch the Guidance Prompts soft-key 2.
ELECTRONICS Main Navigation Menu Finding Points Of Interest • From the NAV main menu, touch the “Points of Interest” soft-key. • Select a Category and then a subcategory, if necessary. • Select your destination and touch “GO.” Finding A Place By Entering The Street Address • From the NAV main menu, touch “New Destination,” then touch “Street Address.” NOTE: If the State and/or Country displayed are incorrect, touch the corresponding soft-key to make the correction.
ELECTRONICS Entering Your Home Location • Press the “NAV” hard-key on the right side of the radio. • From the Nav – Main Menu, touch “Guide Me Home” to enter your home address. If no home address has been set, touch “YES” to access the Enter Home Address menu. • Touch “Street Address” to enter your address. Touch the soft-key with your state’s name and enter your street name into the speller. • Once the street name has been input, touch “CONTINUE” to confirm. Enter the house number into the next screen.
ELECTRONICS Route Guidance • After starting route guidance, the system calculates the route and announces: “Follow the arrows on the display.” You will receive navigation recommendations by voice messages and screen displays. Route Options • After pressing the “OPTIONS” soft-key in the Route Guidance Menu, the following information is displayed: • In the left half of the screen, the current position and the current routing method are displayed. • “Take Detour” will allow you to calculate a different route.
ELECTRONICS SiriusXM SATELLITE RADIO/TRAVEL LINK • SiriusXM Travel Link requires a subscription, sold separately after the 1 year trial subscription included with your vehicle purchase. • SiriusXM Travel Link is only available in the United States. • The following describes features that are available when in SiriusXM Satellite Radio mode. • To access SiriusXM Satellite Radio, press the “RADIO/MEDIA” or “RADIO” and then touch the “SAT” soft-key tab.
ELECTRONICS • You will see a favorite star indicator in the upper right side of the screen below the SAT soft-key and a pop up will alert you that a favorite song or artist is currently playing on one of the SiriusXM satellite radio channels. NOTE: Refer to your Uconnect® 730N or 430/430N User's Manual for more information. Display SAT Favorites List • Touch the “Search/Browse” soft-key and select “Favorites” from the SAT Browse screen.
ELECTRONICS SiriusXM Travel Link (Uconnect® 730N & Uconnect® 430N Only) NOTE: • SiriusXM Travel Link requires a subscription, sold separately after the 1 year trial subscription included with your vehicle purchase. • SiriusXM Travel Link is only available in the United States. • SiriusXM Travel Link brings a wealth of useful information into your vehicle and right to your fingertips. • To access Travel Link, press the MENU hard-key, then the Travel Link soft-key.
ELECTRONICS STEERING WHEEL AUDIO CONTROLS • The steering wheel audio controls are located on the rear surface of the steering wheel. Right Switch • Press the switch up or down to increase or decrease the volume. • Press the button in the center to change modes AM/FM/CD/SXM. Left Switch • Press the switch up or down to search for the next listenable station or select the next or previous CD track.
ELECTRONICS iPod®/USB/MP3 CONTROL • There are many ways to play music from iPod®/MP3 players or USB devices through your vehicle's sound system. • The remote USB port, located within the upper glove box, allows you to plug an iPod® into the vehicle's sound system. NOTE: If equipped with the Uconnect® 730N, the USB port on the faceplate allows the same functions as the remote USB port.
ELECTRONICS Uconnect® Phone • To determine if your vehicle is equipped with Uconnect® Phone, press the “Uconnect® Phone” located on the radio faceplate. If your vehicle has this feature, you will hear a voice button prompt. If not, you will see a message on the radio “Uconnect phone not available”. • The Uconnect® Phone is a voice-activated, hands-free, in-vehicle communications system with Voice Command Capability (see Voice Command section). NOTE: . After the BEEP, say “tutorial.
ELECTRONICS • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your mobile phone. You can say any four-digit PIN. You will not need to remember this PIN after the initial pairing process. • You will then be prompted to give the phone pairing a name (each phone paired should have a unique name).
ELECTRONICS Making A Phone Call • Press the “Phone” button . • After the BEEP, say “dial” (or “call” a name). • After the BEEP, say number (or name). Receiving A Call – Accept (And End) • When an incoming call rings/is announced on Uconnect®, press the Phone button • To end a call, press the Phone button . . Mute (Or Unmute) Microphone During Call • During a call, press the “Voice Command” button . • After the BEEP, say “mute” (or “mute off”).
ELECTRONICS Uconnect® VOICE COMMAND Voice Command Operation • The Uconnect® Voice Command system allows you to control your AM, FM radio, satellite radio, disc player, HDD, Uconnect® Phone, a memo recorder, and supported portable media devices. • When you press the “Voice Command” button located on the radio faceplate or steering wheel, you will hear a beep. The beep is your signal to give a command. If you do not say a command within a few seconds, the system will present you with a list of options.
ELECTRONICS While In: SiriusXM Satellite Radio Mode Disc Mode Memo Mode Voice Command Example: “Channel Number” (to change the channel by its spoken number) “Next Channel” (to select the next channel) “Previous Channel” (to select the previous channel) “List Channel” (to hear a list of available channels) "Channel Name" (to change the channel by its spoken name) “Select Name” (to say the name of a channel) “Radio Menu” (to switch to the radio menu) “Main Menu” (to switch to the main menu) “Track” (#) (
ELECTRONICS NOTE: To access the tutorial, press the “Voice Command” button . After the BEEP, say “tutorial”. Press any hard-key/button or touch the display (Touch-Screen radio) to cancel the tutorial. WARNING! Any voice commanded system should be used only in safe driving conditions following applicable laws regarding phone use. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing you and others to be severely injured or killed.
ELECTRONICS • The video screen displays information in a split screen format. The left side of the screen is referred to as Channel 1 and the right side of the screen is referred to as Channel 2. All modes except video modes are displayed in a split screen format. • To use the headphones, press the power button located on the right ear cup. Select the channel on the headphones (1 or 2) which corresponds to the channel selected on the desired video screen.
ELECTRONICS ELECTRONIC VEHICLE INFORMATION CENTER (EVIC ) • The EVIC features a driver interactive display that is located in the instrument cluster. Pressing the controls on the left side of the steering wheel allows the driver to select vehicle information and Personal Settings. For additional information, refer to “Programmable Features” located in this guide.
ELECTRONICS PROGRAMMABLE FEATURES Electronic Vehicle Information Center (EVIC) – If Equipped • The EVIC can be used to program the following Personal Settings. Press and release the to scroll MENU button until Personal Settings displays, then press the DOWN button to change the setting. through the settings. Press the SELECT button • Language • Nav-Turn By Turn • Enable/Disable the Rear Park Assist System • Auto Unlock Doors • Remote Unlock Sequence • RKE Linked To Memory • Remote Start Comfort Sys.
ELECTRONICS Auto Unlock Doors On Exit • To have all of the vehicle doors unlock when any door is opened: • Enter your vehicle and close all the doors, and fasten your seat belt. • Cycle the ignition switch between the LOCK and ON position four times, ending in the LOCK position (do not start the engine). • Press the power door UNLOCK switch to unlock the doors. A single chime will indicate that programming is complete.
ELECTRONICS Before You Begin Programming HomeLink® • Ensure that your vehicle is parked outside of the garage before you begin programming. • For efficient programming and accurate transmission of the radio-frequency signal, it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink® system. • Erase all channels before you begin programming.
ELECTRONICS Programming A Non-Rolling Code • For programming Garage Door Openers manufactured before 1995. • Turn the ignition switch to the ON/RUN position. • Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. • Simultaneously press and hold both the HomeLink® button you want to program and the hand-held transmitter button. • Continue to hold both buttons and observe the indicator light.
ELECTRONICS POWER INVERTER • There is a 115 Volt, 150 Watt power inverter outlet located on the left rear trim panel immediately behind the second row left passenger seat. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts. • Press the switch located in the center of the instrument panel to turn the power to the outlet on. • Press the switch again to turn the power off.
ELECTRONICS POWER OUTLETS • Two 12 Volt (13 Amp) power outlets are located on the lower instrument panel, below the open storage bin. The driver-side power outlet is controlled by the ignition switch and the passenger-side power outlet is connected directly to the battery. The driver-side power outlet will also operate a conventional cigar lighter unit (if equipped with an optional Smoker's Package).
ELECTRONICS NOTE: • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded, the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlet as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your new vehicle warranty.
UTILITY IN-FLOOR STORAGE – STOW'N GO® Second Row Seat Storage Bins • Storage bins are located in the floor in front of the second row seats that can be used when the second row seat is in the upright position. Pull up on the storage bin latch to open the cover. Slide the storage bin locking mechanism to the "Lock" position to allow greater access to the storage bin. Cargo Area Storage • The liftgate sill plate has a raised line with the statement “Load To This Line”.
On Trailer Dolly Tow Towing Condition Flat Tow Wheels OFF the Ground NONE Front Rear ALL RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) NOT ALLOWED OK All Models NOT ALLOWED OK NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Frontal Area Max. GTW Max. Tongue Wt. (Gross Trailer Wt.) Up to 2 persons & Luggage 8,750 lbs (3,969 kg) 40 sq ft (3.
W H AT TO D O I N E M E R G E N C I E S ROADSIDE ASSISTANCE • Dial toll-free 1-800-521-2779 for U.S. Residents or 1-800-363-4869 for Canadian Residents. • Provide your name, vehicle identification number, license plate number, and your location, including the telephone number from which you are calling. • Briefly describe the nature of the problem and answer a few simple questions. • You will be given the name of the service provider and an estimated time of arrival.
W H AT TO D O I N E M E R G E N C I E S • Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue each time the vehicle is restarted as long as the malfunction exists.
W H AT TO D O I N E M E R G E N C I E S BRAKE - Brake Warning Light • The Brake Warning light illuminates when there is either a system malfunction or the parking brake is applied. If the light is on and the parking brake is not applied, it indicates a possible brake hydraulic malfunction, brake booster problem or an Anti-Lock Brake System problem. • Please have your vehicle serviced immediately. WARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed.
W H AT TO D O I N E M E R G E N C I E S - Electronic Throttle Control (ETC) Indicator Light • This light informs you of a problem with the Electronic Throttle Control (ETC) system. • If a problem is detected, the light will come on while the engine is running. Cycle the ignition when the vehicle has completely stopped and the shift lever is placed in the PARK position; the light should turn off.
W H AT TO D O I N E M E R G E N C I E S IF YOUR ENGINE OVERHEATS • In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. • On the highways — slow down. • In city traffic — while stopped, place the transmission in NEUTRAL, but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off.
W H AT TO D O I N E M E R G E N C I E S JACKING AND TIRE CHANGING Jack Location • The jack, jack handle and winch handle tools are stowed behind the rear left side trim panel in the rear cargo area. Turn the two cover latches to release the cover. • Remove the pouch containing the scissors jack, jack handle, and tools. Spare Tire Removal • The spare tire is stowed inside a protective cover located under the center of the vehicle between the front doors by means of a cable winch mechanism.
W H AT TO D O I N E M E R G E N C I E S 2. Open the front drawer to expose the storage compartment. 3. Remove the liner from the console's storage compartment to access the spare tire winch drive nut. Premium/Base/Cargo Center Console • Pull the Winch Cover assembly plug (if equipped) to access the winch drive nut.
W H AT TO D O I N E M E R G E N C I E S Spare Tire Tools • The tool pouch contains three pieces and can be assembled into a spare tire hook; to remove the compact spare tire/cover assembly from under the vehicle, or a Winch T-handle; to raise/lower the compact spare tire/cover assembly.
W H AT TO D O I N E M E R G E N C I E S Spare Tire Removal Instructions • The spare tire is located under the vehicle beneath the center console area. 1. Assemble the spare tire tools into a T-handle and place the square end over the spare tire winch drive nut. 2. Rotate the nut to the left until the winch mechanism stops turning freely. This will allow enough slack in the cable to allow you to pull the spare tire out from underneath the vehicle. 3.
W H AT TO D O I N E M E R G E N C I E S Preparations For Jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. 2. Turn on the Hazard Warning flasher. 3. Set the parking brake. 4. Place the shift lever into PARK. 5. Turn OFF the ignition. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked. • Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel.
W H AT TO D O I N E M E R G E N C I E S Jacking Instructions 1. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. There are two jack engagement locations on each side of the vehicle body. These locations are on the sill flange of the vehicle body.
W H AT TO D O I N E M E R G E N C I E S Rear jack locations are between a pair of down-facing tabs on the sill flange of the vehicle side body. Front jack location is on the sill flange of the vehicle body and is located 6 in (150 mm) from door edge. NOTE: In some situations the jack may need to be placed on its side in order to be pushed under the vehicle. Return the jack to its correct orientation once it is under the vehicle. 3.
W H AT TO D O I N E M E R G E N C I E S 5. Remove the wheel lug nuts, for vehicles with wheel covers, remove the cover from the wheel by hand. Do not pry the wheel cover off. Then pull the wheel off the hub. 6. Install the compact spare tire. Lightly tighten the lug nuts. NOTE: • Do not install the wheel cover on the compact spare. • Do not use a hammer or force to install the wheel covers. 7. Lower the vehicle by turning the jack screw to the left. 8. Finish tightening the lug nuts.
W H AT TO D O I N E M E R G E N C I E S 3. Turn the compact spare tire so that the valve stem is down, and place the tire into the spare tire/cover assembly. Slide the wheel spacer through the center of the wheel and spare tire/cover assembly, so that the two retainer tabs snap out and engage the spare tire cover on the opposite side. 4. Using the winch T-handle, rotate the drive nut to the right until the compact spare tire/cover assembly is drawn into place against the underside of the vehicle. 5.
W H AT TO D O I N E M E R G E N C I E S Vehicles Without Wheel Covers 1. Mount the road tire on the axle. 2. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts. 3. Lower the vehicle to the ground by turning the jack handle counterclockwise. 4. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened twice.
W H AT TO D O I N E M E R G E N C I E S WARNING! • • • • • • • • • • • • • • • • • • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
W H AT TO D O I N E M E R G E N C I E S JUMP-STARTING • If your vehicle has a discharged battery it can be jump-started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. • Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully. NOTE: When using a portable battery booster pack follow the manufacturer’s operating instructions and precautions.
W H AT TO D O I N E M E R G E N C I E S • Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. • Disconnect the positive (+) end of the jumper cable from the positive (+) post of the discharged vehicle. • If frequent jump-starting is required to start your vehicle you should have the battery and charging system inspected at your authorized dealer.
W H AT TO D O I N E M E R G E N C I E S SHIFT LEVER OVERRIDE • If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: • To access the shift lever override, remove the cover located to the top right of the shift lever in the instrument panel. • Firmly set the parking brake. • Turn the ignition switch to the ACC or ON position without starting the engine.
Flatbed Front ALL Rear NONE Flat Tow Wheel lift Wheels OFF the Ground Towing Condition TOWING A DISABLED VEHICLE ALL MODELS If transmission is operable: • Transmission in NEUTRAL • 25 mph (40 km/h) max speed • 15 miles (24 km) max distance OK BEST METHOD W H AT TO D O I N E M E R G E N C I E S 113
W H AT TO D O I N E M E R G E N C I E S FREEING A STUCK VEHICLE • If your vehicle becomes stuck in mud, sand or snow, it can often be moved using a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE and REVERSE while gently pressing the accelerator. Use the least amount of accelerator pedal pressure that will maintain the rocking motion, without spinning the wheels or racing the engine.
W H AT TO D O I N E M E R G E N C I E S EVENT DATA RECORDER (EDR) • This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
M A I N TA I N I N G YO U R V E H I C L E OPENING THE HOOD • Pull the hood release lever located on the instrument panel, below the steering column. • Raise the hood and locate the safety catch lever, in the middle of the hood opening. • Move the safety latch while lifting the hood at the same time. • Insert the support rod into the slot on the hood. • To close the hood, remove the support rod and place it in the retaining clip, then lower the hood slowly.
M A I N TA I N I N G YO U R V E H I C L E ADDING FUEL Fuel Filler Cap (Gas Cap) • The gas cap is located behind the fuel filler door on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. • When the fuel nozzle “clicks” or shuts off, the fuel tank is full. • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is properly tightened.
118 3.
M A I N TA I N I N G YO U R V E H I C L E FLUIDS AND CAPACITIES Component Engine Coolant– 3.6L Engine Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Antifreeze/ Coolant 10–Year/150,000 Mile Formula OAT (Organic Additive Technology). Engine Oil with Filter– 3.6L Engine We recommend you use API certified 5W-20 engine oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your il filler cap for correct SAE grade. Engine Oil Filter– 3.
M A I N TA I N I N G YO U R V E H I C L E CAUTION! • • • Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze).
M A I N TA I N I N G YO U R V E H I C L E Your authorized dealer will reset the oil change indicator message after completing the scheduled oil change. If a scheduled oil change is performed by someone other than your authorized dealer, the message can be reset by referring to the steps described under “Electronic Vehicle Information Center (EVIC)/Oil Change Required” in “Understanding Your Instrument Panel” for further information.
30,000 X Change automatic transmission fluid and filter(s) if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing. X X X X X X X X X X X X X Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. X X Replace spark plugs (3.6L engine). ** Replace cabin/air conditioning filter. Replace engine air filter. X Inspect the brake linings, parking brake function.
80,000 64,000 48,000 20,000 32,000 Or Kilometers: 30,000 • • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
124 20,000 Miles (32,000 km) or 2 Years 30,000 Miles (48,000 km) or 3 Years 40,000 Miles (64,000 km) or 4 Years 50,000 Miles (80,000 km) or 5 Years 60,000 Miles (96,000 km) or 6 Years 70,000 Miles (112,000 km) or 7 Years 80,000 Miles (128,000 km) or 8 Years Odometer Date Signature, Authorized Service Center MAINTENANCE RECORD 90,000 Miles (144,000 km) or 9 Years 100,000 Miles (160,000 km) or 10 Years 110,000 Miles (176,000 km) or 11 Years 120,000 Miles (192,000 km) or 12 Years 130,000 Miles (208,000 km
FUSES M A I N TA I N I N G YO U R V E H I C L E 125
M A I N TA I N I N G YO U R V E H I C L E Integrated Power Module (fuses) • The Integrated Power Module (fuses) is located in the engine compartment near the battery. This center contains cartridge fuses, mini-fuses and relays.
M A I N TA I N I N G YO U R V E H I C L E Cavity M8 M9 M10 Cartridge Fuse Mini-Fuse 20 Amp Yellow 20 Amp Yellow 15 Amp Blue M11 M12 M13 10 Amp Red 30 Amp Green 20 Amp Yellow M14 M15 20 Amp Yellow 20 Amp Yellow M16 10 Amp Red M17 15 Amp Blue M18 15 Amp Blue M19 M20 25 Amp Natural 15 Amp Blue M21 M22 M23 20 Amp Yellow 10 Amp Red 10 Amp Red M24 M25 25 Amp Natural 20 Amp Yellow Description Front Heated Seat (If Equipped) Rear Heated Seat (If Equipped) Ignition Off Draw — Vehicle Entertainmen
M A I N TA I N I N G YO U R V E H I C L E Cavity M26 Cartridge Fuse Mini-Fuse 10 Amp Red M27 10 Amp Red M28 10 Amp Red M29 M30 10 Amp Red 15 Amp Blue M31 M32 20 Amp Yellow 10 Amp Red M33 10 Amp Red M34 10 Amp Red M35 M36 M37 10 Amp Red 20 Amp Yellow 10 Amp Red M38 25 Amp Natural 128 Description Power Mirror Switch (PWR MIRR SW), Driver Window Switch (DRVR WIND SW) Wireless Ignition Module, Keyless Entry Module Next Generation Controller (NGC), PCM, Transmission Feed (TRANS FEED), TCM Oc
M A I N TA I N I N G YO U R V E H I C L E TIRE PRESSURES • Check the inflation pressure of each tire, including the spare tire, at least monthly and inflate to the recommended pressure for your vehicle. • The tire pressures recommended for your vehicle are found on the “Tire and Loading Information” label located on the driver’s side door opening. NOTE: Refer to the Owner's Manual on the DVD for more information regarding tire warnings and instructions.
M A I N TA I N I N G YO U R V E H I C L E WHEEL AND WHEEL TRIM CARE • All wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleans regularly with a mild soap and water to prevent corrosion. • To remove heavy soil and/or excessive brake dust the following MOPAR® wheel cleaners are recommended or select a non-abrasive, non acidic cleaner. • For chrome wheels, use MOPAR® Chrome Cleaner (Part# 04318013) or equivalent.
CO N S U M E R A S S I S TA N C E CHRYSLER GROUP LLC CUSTOMER CENTER P.O. Box 21–8004 Auburn Hills, MI 48321–8004 Phone: 1–800–247–9753 CHRYSLER CANADA INC. CUSTOMER CENTER P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: 1–800–465–2001 (English) Phone: 1–800–387–9983 (French) ASSISTANCE FOR THE HEARING IMPAIRED • To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center.
CO N S U M E R A S S I S TA N C E REPORTING SAFETY DEFECTS IN THE 50 UNITED STATES AND WASHINGTON, D.C. • If you believe that your vehicle has a defect that could cause a collision or cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying the manufacturer.
M O PA R ACC E S S O R I E S AUTHENTIC ACCESSORIES BY MOPAR® • The following highlights just some of the many Authentic Chrysler Accessories by Mopar featuring a fit, finish, and functionality specifically for your Chrysler Town & Country. • In choosing Authentic Accessories you gain far more than expressive style, premium protection, or extreme entertainment, you also benefit from enhancing your vehicle with accessories that have been thoroughly tested and factory-approved.
INDEX Airbag . . . . . . . . . . . . . . . . . . .18 Arming Theft System (Security Alarm). . .16 Automatic Headlights . . . . . . . . . . .32 Automatic Temperature Control (ATC) . . .38 Automatic Transmission Fluid Type . . . . . . . . . . . . . .119 Auxiliary Audio/Video Input Jacks . . . . .83 Axle Fluid . . . . . . . . . . . . . . . . .119 Back-Up Camera . . . . . . . . . . . . .40 Belts, Seat . . . . . . . . . . . . . . . . .17 Blind Spot Monitoring . . . . . . . . . . .40 Brake Fluid . . . . . . . . .
INDEX Intermittent Wipers (Delay Wipers) . . . .30 Introduction . . . . . . . . . . . . . . . . .3 Inverter Outlet (115V) . . . . . . . . . . .89 Inverter, Power . . . . . . . . . . . . . . .89 iPod®/USB/MP3 Control. . . . . . . . . .76 Bluetooth Streaming Audio . . . . . .82 Jack Location . . . . . . . . . . . . . . .99 Jack Operation . . . . . . . . . . . . . .99 Jump Starting . . . . . . . . . . . . . . .110 Key Fob . . . . . . . . . . . . . Key Fob Programmable Features Keyless Enter-N-Go . . . . . . .
INDEX Speed Control Accel/Decel . . . . . . . . . . . . . .33 Cancel . . . . . . . . . . . . . . . . .33 Distance Setting (ACC Only) . . . . .33 Starting Remote . . . . . . . . . . . . . . . .12 Steering Tilt Column . . . . . . . . . . . . . .27 Wheel, Heated . . . . . . . . . . . .27 Steering Wheel Audio Controls . . . . . .75 Stow `n Go (Fold in Floor) Seats. . . . . .22 Stuck, Freeing . . . . . . . . . . . . . . .114 Sun Roof. . . . . . . . . . . . . . . . . .42 Supplemental Restraint System - Airbag. .
F A Q ( H o w To ? ) FREQUENTLY ASKED QUESTIONS GETTING STARTED • How do I install my LATCH Equipped Child Seat? pg. 19 • How do I program my Front Seat Memory? pg. 21 OPERATING YOUR VEHICLE • How does the Electronic Range Select (ERS) operate? pg. 34 ELECTRONICS • Which radio is in my vehicle? • Uconnect® 130 pg. 46 • Uconnect® 130 WITH Sirius XM™ SATELLITE RADIO pg. 48 • Uconnect® 430/430N pg. 51 • Uconnect® 730N pg. 61 • How do I activate the Audio Jack? • Uconnect® 130 pg.
F A Q ( H o w To ? ) UTILITY • How do I know how much I can tow with my Chrysler Town & Country? pg. 93 WHAT TO DO IN EMERGENCIES • What do I do if my TPMS warning light is blinking? pg. 94 • How do I change a flat tire? pg. 104 • How do I Jump-Start my vehicle? pg. 110 MAINTAINING YOUR VEHICLE • Where is my Fuse Block located? pg. 126 • What type of oil do I use? pg. 119 • How often should I change my engine’s oil? pg. 120 • What should my tire pressure be set at? pg.
NOTES 139
NOTES 140
NOTES 141
NOTES 142
NOTES 143
NOTES 144
If you are the first registered retail owner of your vehicle, you may obtain a complimentary printed copy of the Owner’s Manual, Navigation/UCONNECT® Manuals or Warranty Booklet by calling 1-800-247-9753 (U.S.) or 1-800-387-1143 (Canada) or by contacting your dealer. The driver’s primary responsibility is the safe operation of the vehicle. Driving while distracted can result in loss of vehicle control, resulting in a collision and personal injury.
Download a FREE Vehicle Information App by visiting your application store, Keyword (Chrysler Concierge), or scanning the Microsoft Tag. To put Microsoft Tags to work for you, use your mobile phone’s browser or App store to download a Microsoft Tag reader, like the free one at www.gettag.mobi. Then follow the directions to scan the code. Get the free mobile app for your phone U.S. only http://gettag.
