User Guide

5. Remove the fastener securing the jack.

6. Remove the scissors jack and lug wrench

from the spare wheel as an assembly. Turn

the jack screw to the left to loosen the lug

wrench, and remove the wrench from the

jack assembly.

Preparations For Jacking

1. Park the vehicle on a firm, level surface as far from the edge of the roadway as possible.

Avoid icy or slippery areas.

2. Turn on the Hazard Warning flasher.

3. Set the parking brake.

4. Place the shift lever into PARK.

5. Turn OFF the ignition.

Block the front and rear of the wheel diagonally

opposite of the jacking position. For example,

if changing the right front tire, block the left

rear wheel.

NOTE: Passengers should not remain in the

vehicle when the vehicle is being jacked.

WHAT TO DO IN EMERGENCIES