User Guide

• If the shift lever is not in PARK, the ENGINE START/STOP button must be held for

two seconds and vehicle speed must be above 5 mph (8 km/h) before the engine will

shut off.

Accessory Positions with Engine Off

NOTE: The following functions are with the driver’s foot OFF the Brake Pedal (Transmission

in PARK or NEUTRAL Position).

Starting With The Ignition Switch In The OFF Position:

• Press the ENGINE START/STOP button once to change the ignition switch to the ACC

position.

• Press the ENGINE START/STOP button a second time to change the ignition switch to

the ON/RUN position.

• Press the ENGINE START/STOP button a third time to return the ignition switch to the

OFF position.

NOTE: If the ignition switch is left in the

ACC or ON/RUN (engine not running)

position and the transmission is in PARK, the

system will automatically time out after

30 minutes of inactivity and the ignition will

switch to the OFF position.

THEFT ALARM

To Arm

• Press the Keyless Enter-N-Go Start/Stop button until the Electronic Vehicle Information

Center (EVIC) indicates that the vehicle ignition is “OFF”. Press the power door lock

switch while the door is open, press the Key Fob LOCK button, or with one of the Key

Fobs located outside the vehicle and within 5 ft (1.5m) of the driver's and passenger front

door handles, press the Keyless Enter-N-Go LOCK button located on the door handle.

NOTE: After pressing the Keyless Enter-N-Go LOCK button, you must wait two seconds

before you can lock or unlock the vehicle via the door handle.

To Disarm

• Press the Key Fob UNLOCK button or with one of the Key Fobs located outside the

vehicle and within 5 ft (1.5m) of the driver's and passenger front door handles, grab the

Keyless Enter-N-Go door handle and enter the vehicle, then press the Keyless

Enter-N-Go Start/Stop button (requires at least one valid Key Fob in the vehicle).

OFF RUN

ACC

Press Press

Press

GETTING STARTED