2012 200 Sedan 2012 OWNER’S MANUAL Chrysler Group LLC 12C41-126-AA 906108 200 Sedan OM cover.indd 1 First Edition 200 Sedan Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. This manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents.
INTRODUCTION 5
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 䡵 Vehicle Security Alarm — If Equipped . . . . . . . . 18 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ Rearming The System . . . . . . . . . . . . . . . . . . 18 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . 15 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 19 ▫ Locking The Doors With The Key . . . . . . . . . . 15 ▫ To Disarm The System . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 25 ▫ Auto Window Down — If Equipped . . . . . . . 36 ▫ Programming Additional Transmitters . . . . . . 25 ▫ Auto Window Up With Anti-Pinch Protection — If Equipped . . . . . . . . . . . . . . . 37 ▫ Transmitter Battery Replacement . . . . . . . . . . 26 ▫ General Information . . . . . . . . . . . . . . . . . . . 27 䡵 Remote Start System — If Equipped . . . . . . . . . 27 ▫ How To Use Remote Start .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belts In Passenger Seating Positions . . . . . 50 ▫ Advanced Front Air Bag Features . . . . . . . . . . 60 ▫ Automatic Locking Retractor Mode (ALR) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 51 ▫ Air Bag Deployment Sensors And Controls . . . 64 ▫ Energy Management Feature . . . . . . . . . . . . . 52 ▫ Seat Belt Pretensioners . . . . . . . . . . . . . . . . . 52 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dealer for these numbers and keep them in a safe place. You can insert the double-sided keys into the locks with either side up. Vehicle Key Ignition Key Removal Automatic Transaxle Place the shift lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to warn you that this safety feature is inoperable. The engine can be started and stopped, but the key cannot be removed until you obtain service.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The time for this feature is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/ Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. WARNING! • Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the key fob from the ignition. When leaving the vehicle, always lock your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Key-In-Ignition Reminder SENTRY KEY姞 Opening the driver’s door when the key is in the ignition The Sentry Key威 Immobilizer System prevents unauthorsounds a signal to remind you to remove the key. ized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation NOTE: is automatic, regardless of whether the vehicle is locked • The Key-In-Ignition reminder only sounds when the or unlocked.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seconds for a bulb check. If the light remains on after the bulb check, it indicates that there is a problem with the electronics. In addition, if the light begins to flash after the bulb check, it indicates that someone used an invalid key to start the engine. Either of these conditions will result in the engine being shut off after two seconds. All of the keys provided with your vehicle have been programmed to the vehicle electronics.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 3. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After ten seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and NOTE: When having the Sentry Key威 Immobilizer remove the second key. System serviced, bring all vehicle keys with you to the 4. Insert a blank Sentry Key威 into the ignition switch.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Repeat this procedure to program up to eight keys. If you VEHICLE SECURITY ALARM — IF EQUIPPED do not have a programmed Sentry Key威 contact your The Vehicle Security Alarm monitors the doors and trunk for unauthorized entry and ignition switch for unauthorauthorized dealer for details. ized operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 NOTE: • During the 16-second arming period, if a door is 1. Remove the keys from the ignition switch and get out opened or the ignition switch is turned to ON/RUN, of the vehicle. the Vehicle Security Alarm will automatically disarm. 2.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Vehicle Security Alarm remains armed during trunk entry. Pressing the trunk button will not disarm the Vehicle Security Alarm. If someone enters the vehicle through the trunk and opens any door, the alarm will sound. Tamper Alert If the alarm was triggered, but the warning signals have timed out, the park and taillights flash three times, and the horn will chirp three times, when unlocking the vehicle with a valid RKE transmitter to alert the driver.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 NOTE: • Inserting the key into the ignition switch disables all • The front courtesy overhead console and door courbuttons on the RKE transmitter. tesy lights will remain on if the dimmer control is in the ⬙Dome ON⬙ position (extreme top position). • The Illuminated Entry system will not operate if the dimmer control is in the “Dome defeat” position (extreme bottom position).
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock The Doors Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door, or twice to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The Illuminated Entry system (if equipped) will also turn on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If there is no key in the ignition switch, pressing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle Security Alarm system. Opening a door with the system activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm system. Flash Lights With Lock The feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If there is no key in the ignition switch, pressing the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle Security Alarm system. Opening a door with the system activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm system. Sound Horn With Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 3. Test the feature while outside of the vehicle by press- second and release. When the Panic Alarm is on, the ing the LOCK button on the RKE transmitter with the headlights turn on, the park lights will flash, the horn will pulse on and off, and the Illuminated Entry system ignition in the LOCK position and the key removed. (if equipped) will turn on. 4.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Replacement The recommended replacement battery is CR2032. NOTE: Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate 1. With the RKE transmitter buttons facing down, use a flat blade screwdriver to pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal. Separating RKE Transmitter Halves 2. Remove and replace the battery.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 2. Closeness to a radio transmitter such as a radio station General Information This device complies with part 15 of FCC rules and with tower, airport transmitter, military base, and some mobile RS-210 of Industry Canada. Operation is subject to the or CB radios. following conditions: REMOTE START SYSTEM — IF EQUIPPED 1. This device may not cause harmful interference. This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conve2.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Hood closed • Trunk closed • Hazard switch off • Brake switch inactive (brake pedal not pressed) • Ignition key removed from ignition switch • Battery at an acceptable charge level, and • RKE PANIC button not pressed • System not disabled from previous remote start event • Vehicle theft alarm not active WARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Remote Start Aborted — Hood Ajar • Remote Start Aborted — Trunk Ajar 29 • For security, power window operation is disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times (two 15 minute cycles) with the RKE transmitter.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Exit Remote Start Mode Without Driving The DOOR LOCKS Vehicle Manual Door Locks Press and release the REMOTE START button one time or To lock each door, push the door lock knob on each door allow the engine to run for the entire 15 minute cycle. trim panel downward. To unlock each door, pull the NOTE: To avoid unintentional shut downs, the system inside door handle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WARNING! WARNING! (Continued) • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE when the vehicle’s speed exceeds 15 mph (24 km/h). The Power Door Locks A door lock switch is located on the driver and passenger auto door lock feature can be enabled or disabled by your door panel. Press this switch to lock or unlock the doors. authorized dealer. Please see your authorized dealer for service. Auto Unlock On Exit The doors will unlock automatically on vehicles with power door locks if: 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 3. Press the power door unlock switch to unlock the Auto Unlock On Exit Programming The Automatic Unlock Doors On Exit feature can be doors. enabled or disabled as follows: 4. A single chime will indicate the completion of the • For vehicles equipped with the Electronic Vehicle programming. Information Center (EVIC), refer to “Electronic Vehicle 5.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child-Protection Door Lock System — Rear Doors To provide a safer environment for children riding in the rear seat, the rear doors of your vehicle have a ChildProtection Door Lock system. The Child-Protection Door Locks are located inside the rear edge of the door. Insert the tip of the ignition key or similar flat-bladed object into the lock and rotate approximately one-quarter turn to the lock or unlock position (as indicated by the stamped icons).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged. 2 NOTE: For emergency exit with the system engaged, move the lock knob up (UNLOCKED position), roll down the window, and open the door with the outside door handle.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! To cancel the Auto-Down movement, operate the switch either in the up or down direction and release the switch. Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Auto Window Up With Anti-Pinch Protection — If • Any impact due to rough road conditions may trigger Equipped the auto reverse function unexpectedly during autoLift the window switch fully upward to the second closure. If this happens, pull the switch lightly to the detent, release, and the window will go up automatically. first detent and hold to close window manually.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, press the window LOCK button. To enable the window controls, press the window control button again. Window Lockout Switch Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: The shift lever must be in PARK for this button TRUNK SAFETY WARNING to operate. To unlatch the trunk lid from outside the vehicle, press and release the TRUNK button on the RKE transmitter two times. With the ignition switch in the ON/RUN position, the word “dECK ” will display in place of the odometer display indicating that the trunk is open. The odometer display will reappear once the trunk is closed or if the trip button is depressed.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Internal Emergency Release As a security measure, a Trunk Internal Emergency Release lever is built into the trunk latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be simply opened by pulling on the glow-in-the-dark handle attached to the trunk latching mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 • Knee bolsters/blockers for front seat occupants If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and Tether • Front seat belts incorporate pretensioners that may for CHildren (LATCH) feature also can be used to hold enhance occupant protection by managing occupant infant and child restraint systems.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Infants in rear facing child restraints should never ride in the front seat of a vehicle with a passenger Advanced Front Air Bag. An air bag deployment can cause severe injury or death to infants in that position. Children that are not big enough to wear the vehicle seat belt properly (see section on Child Restraints) should be secured in the rear seat in child restraints or beltpositioning booster seats.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under ⴖIf You Need Assistanceⴖ. WARNING! • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, the air bags won’t deploy at all. Always wear your seat belts even though you have air bags.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Buckle up even though you are an excellent driver, even conditions. However, in a collision the belt will lock and on short trips. Someone on the road may be a poor driver reduce your risk of striking the inside of the vehicle or and cause a collision that includes you. This can happen being thrown out. far away from home or on your own street. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too. • Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during a collision.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt may not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Lap/Shoulder Belt Untwisting Procedure Adjustable Upper Shoulder Belt Anchorage Use the following procedure to untwist a twisted lap/ In the front seat, the shoulder belt can be adjusted shoulder belt. upward or downward to position the belt away from your neck. Push anchorage button to release the anchor1. Position the latch plate as close as possible to the age, and move it up or down to the position that serves anchor point. you best. 2.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will Driver prefer a lower position, and if you are taller than average, First Row N/A you will prefer a higher position. When you release the Second Row ALR anchorage, try to move it up or down to make sure that • N/A — Not Applicable it is locked in position. Rear Seat Belts The shoulder belt anchorages of the rear three-point belts are nonadjustable for outboard and center rear passengers on sedans.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically prelocked. The belt will still retract to remove any slack in the shoulder belt. The Automatic Locking Mode is available on all passenger-seating positions with a combination lap/shoulder belt. Use the Automatic Locking Mode anytime a child safety seat is installed in a seating position that has a belt with this feature.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Energy Management Feature This vehicle has a safety belt system with an Energy Management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on collision. This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner. This feature is designed to help reduce the belt force acting on the occupant’s chest.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 How The Active Head Restraints (AHR) Work The Occupant Restraint Controller (ORC) determines whether the severity, or type of rear impact will require the Active Head Restraints (AHR) to deploy. If a rear impact requires deployment, both the driver and front passenger seat AHRs will be deployed. When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! 1. Grasp the deployed AHR from the rear seat. All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 2 1 — Downward Movement 2 — Rearward Movement 3 — Final Downward Movement To Engage Locking Mechanism
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. The AHR front soft foam and trim half should lock • For safety reasons, have the Active Head Restraints into the back decorative plastic half. checked by a qualified specialist at an authorized dealer. Enhanced Seat Belt Use Reminder System (BeltAlert姞) BeltAlert威 is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert威) to fasten their seat belts. The feature is active whenever the ignition is on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Light remains illuminated until the respective seat belts are fastened. The driver should instruct all other occupants to fasten their seat belts. If a front seat belt is unbuckled while traveling at speeds greater than 5 mph (8 km/h), BeltAlert威 will provide both audio and visual notification.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE extender should be used only if the existing belt is not instrument panel, above the glove compartment. The long enough. When it is not required, remove the ex- words SRS AIRBAG are embossed on the air bag covers. tender, and store it. WARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 NOTE: The Driver and Front Passenger Advanced Front This vehicle is equipped with Supplemental Side Air Bag Air Bags are certified to the new Federal regulations for Inflatable Curtains (SABIC) to protect the driver, front, and rear passengers sitting next to a window. If the Advanced Air Bags. vehicle is equipped with SABIC, they are located above The Advanced Front Air Bags have a multistage inflator the side windows.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag System Components • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, Your vehicle may be equipped with the following air bag and Seat Track Position Sensors system components: Advanced Front Air Bag Features • Occupant Restraint Controller (ORC) The Advanced Front Air Bag system has multistage driver and front passenger air bags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only. Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system includes side impact sensors that are calibrated to deploy the side air bags during impacts that require air bag occupant protection. WARNING! • If your vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front Air Bags work with the knee bolsters to provide improved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Also, the ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Air Bag Warning Light will turn off.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Based on several factors, including the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating SAB exits through the seat seam into the space between the occupant and the door. The SAB fully inflate in about 10 milliseconds.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System In the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether to have the Enhanced Accident Response System perform the following functions: If A Deployment Occurs The Advanced Front Air Bags are designed to deflate immediately after deployment. • Cut off fuel to the engine.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • As the air bags deflate, you may see some smoke-like particles. The particles are a normal by-product of the process that generates the non-toxic gas used for air bag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Air Bag System WARNING! (Continued) WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light You will want to have the air bags ready to inflate for your protection in a collision. The Air Bag Warning Light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components. While the air bag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the air bag system immediately.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Whether or not the driver and passenger safety belts To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the child’s size.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE held in the vehicle by the lap/shoulder belt or the as long as possible, up to the highest weight or height LATCH child restraint anchor system. Refer to “Lower allowed by the child seat. These child seats are also held Anchors and Tether for CHildren (LATCH)”. in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system. Refer to “Lower AnWARNING! chors and Tether for CHildren (LATCH)”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • All passenger seating positions contain automatic • Buckle the child into the seat according to the child locking retractors. However, any seat belt system will restraint manufacturer’s directions. loosen with time, so check the belt occasionally and WARNING! pull it tight if necessary.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors and Tether for CHildren (LATCH) Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tether for CHildren. The LATCH system provides for the installation of the child restraint without using the vehicle seat belt. All rear seating positions have lower anchorages that are capable of accommodating LATCH-compatible child seats having flexible, webbingmounted lower attachments.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Rear Seat LATCH Anchors Child restraints systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage, have been available for some time. In fact, many child restraint manufacturers will provide add-on tether strap kits for some of their older products. Tether anchorage kits are also available for most older vehicles.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 have tether straps, and you are urged to take advantage Installing The LATCH-Compatible Child Restraint of all of the available attachments provided with your System We urge you to carefully follow the directions of the child restraint in any vehicle. manufacturer when installing your child restraint. Not all NOTE: When using the LATCH attaching system to child restraint systems will be installed as described here.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE window. These tether strap anchorages are under a provide the most direct path between the anchor and the child restraint. Finally, tighten all three straps as you plastic cover with this symbol on it.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle. 2 WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE route the tether strap under the head restraint and between the two posts. If not possible, lower the head restraint and pass the tether strap around the outboard side of the head restraint. Installing Child Restraints Using The Vehicle Seat Belts The seat belts in the passenger seating positions are equipped with an Automatic Locking Retractor to secure a Child Restraint System (CRS). These types of seat belts 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE First Row Second Row Driver CRS Lock N/A ALR Center CRS Lock N/A ALR Passenger CRS Lock ALR ALR 83 2. Finally, pull on any excess webbing to tighten the lap portion around the child restraint. Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the lap/shoulder belt in a rear seat. Make sure that: • The child is upright in the seat. Transporting Pets Air Bags deploying in the front seat could harm your pet.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur. For the recommended viscosity and quality grades, refer to “Maintenance Procedures” in “Maintaining Your Vehicle”. CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 inspect the exhaust system each time the vehicle is raised authorized dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authofor lubrication or oil change. Replace as required. rized dealer. Safety Checks You Should Make Inside The Vehicle Defroster Check operation by selecting the defrost mode and place Seat Belts the blower control on high speed.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 䡵 Uconnect™ Phone — If Equipped . . . . . . . . . . 100 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 96 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . 102 ▫ Automatic Dimming Mirror — If Equipped . . . 96 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . 109 ▫ Power Mirrors . . . . . . . . . . . . . . . . . . . . . . .
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Voice Command — If Equipped . . . . . . . . . . . 130 ▫ Fold-Flat Passenger Seatback . . . . . . . . . . . . 145 ▫ Voice Command System Operation . . . . . . . . 130 ▫ Folding Rear Seat . . . . . . . . . . . . . . . . . . . . 146 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 131 ▫ Folding Rear Seat Center Armrest . . . . . . . . 147 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . 135 䡵 To Open And Close The Hood . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 ▫ Fog Lights — If Equipped . . . . . . . . . . . . . . 153 䡵 Electronic Speed Control — If Equipped . . . . . 161 ▫ Daytime Running Lights — If Equipped . . . . 153 ▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . 162 ▫ Lights On Reminder . . . . . . . . . . . . . . . . . . 154 ▫ To Set A Desired Speed . . . . . . . . . . . . . . . . 162 ▫ Instrument Panel Dimmer . . . . . . . . . . . . . . 154 ▫ To Deactivate . . . . . . . . . . . . . .
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Using HomeLink威 . . . . . . . . . . . . . . . . . . . 170 ▫ Sunroof Maintenance . . . . . . . . . . . . . . . . . 175 ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 ▫ Ignition Off Operation . . . . . . . . . . . . . . . . . 175 ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . 171 䡵 Electrical Power Outlets . . . . . . . . . . . . . . . . . 176 ▫ General Information . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 䡵 Cargo Area Features . . . . . . . . . . . . . . . . . . . 184 䡵 Rear Window Features . . . . . . . . . . . . . . . . . . 186 ▫ Ski Pass-Through . . . . . . . . . . . . . . . . . . . . 186 ▫ Rear Window Defroster . . . . . . . . . . . . . . . .
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. NOTE: This feature is disabled when the vehicle is moving in reverse. Automatic Dimming Mirror 97 CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Mirrors The power mirror controls are located on the driver’s door trim panel. Mirror Directions Power Mirror Switch To adjust a mirror, turn the control wand toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. When you are finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Adjusting Sideview Mirrors Exterior Mirrors Folding Feature All exterior mirrors are hinged and may be moved either Outside Mirror — Driver Side forward or rearward to resist damage. The hinges have Adjust the outside mirror to center on the adjacent lane of three detent positions: full forward, full rearward and traffic, with a slight overlap of the view obtained on the normal. inside mirror.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on each sun visor. To use the mirror, lower the sun visor and rotate the mirror cover upward. The lights will turn on automatically. Closing the mirror cover turns off the lights. Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, invehicle communications system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • www.jeep.com/uconnect • or call 1–877–855–8400 Uconnect™ Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. 101 system. Only one linked (or paired) mobile phone can be used with the system at a time. The system is available in English, Spanish, or French languages.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command Button Actual button location may vary with the radio. The individual buttons are described in the “Operation” section. Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice command “Phonebook New Entry”, or you can break the compound form command into two voice commands: “Phonebook” and “New Entry”. Please remember, the Uconnect™ Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, after the beep, say “Pair a Device” and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. phone to use if multiple mobile phones are in the vehicle at the same time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Call By Saying A Name Add Names To Your Uconnect™ Phonebook • Press the NOTE: Adding names to the Uconnect™ Phonebook is recommended when the vehicle is not in motion. button to begin. • After the “Ready” prompt and the following beep, say • Press the “Call”. button to begin. • The system will prompt you to say the name of the • After the “Ready” prompt and the following beep, say person you want to call. “Phonebook New Entry”.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After you are finished adding an entry into the phone- • To call a name from the Uconnect™ Phonebook or book, you will be given the opportunity to add more downloaded Phonebook, follow the procedure in phone numbers to the current entry or to return to the “Call by Saying a Name” section. main menu.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 • Only the mobile phone’s phonebook is downloaded. • After the “Ready” prompt and the following beep, say SIM card phonebook is not part of the Mobile phone“Phonebook Edit Entry”. book. • You will then be asked for the name of the phonebook entry that you wish to edit. • This downloaded phonebook cannot be edited or deleted on the Uconnect™ Phone. These can only be • Next, choose the number designation (home, work, edited on the mobile phone.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE mobile and a home number, but you can add “John • After you enter the name, the Uconnect™ Phone will Doe’s” work number later using the “Phonebook Edit ask you which designation you wish to delete: home, Entry” feature. work, mobile, other, or all. Say the designation you wish to delete. Delete Uconnect™ Phonebook Entry • Note that only the phonebook entry in the current NOTE: Editing phonebook entries is recommended language is deleted.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • Note that only the phonebook in the current language • The Uconnect™ Phone will then prompt you as to the is deleted. number designation you wish to call. • Automatic downloaded phonebook entries cannot be • The selected number will be dialed. deleted or edited. Phone Call Features List All Names In The Uconnect™ Phonebook The following features can be accessed through the Uconnect™ Phone if the feature(s) are available on your button to begin.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE call, press and hold the button until you hear a single beep, indicating that the incoming call was rejected. Answer Or Reject An Incoming Call — Call Currently In Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your button to place the current mobile phone. Press the call on hold and answer the incoming call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Conference Call When two calls are in progress (one active and one on button until you hear a hold), press and hold the double beep indicating that the two calls have been joined into one conference call. Call Termination To end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Continuation Call continuation is the progression of a phone call on the Uconnect™ Phone after the vehicle ignition key has been switched to OFF. Call continuation functionality available on the vehicle can be any one of three types: Uconnect™ Phone Features Language Selection To change the language that the Uconnect™ Phone is using: • Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Assistance If you are in an emergency and the mobile phone is reachable: 113 Canada and 060 for Mexico). The number dialed may not be applicable with the available mobile service and area. • Pick up the phone and manually dial the emergency • If supported, this number may be programmable on button and say number for your area. some systems. To do this, press the “Setup”, followed by “Emergency”.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Towing Assistance If you need towing assistance: Paging To learn how to page, refer to “Working with Automated Systems”. Paging works properly except for pagers of • Press the button to begin. certain companies, which time out a little too soon to • After the “Ready” prompt and the following beep, say work properly with the Uconnect™ Phone. “Towing Assistance”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE When calling a number with your Uconnect™ Phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can press the button and say the sequence you wish to enter, followed by the word “Send”. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can button and say, “3 7 4 6 # Send”.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts ON/OFF Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ Phone will not repeat a phone number before you dial it). Dialing Using The Mobile Phone Keypad You can dial a phone number with your mobile phone keypad and still use the Uconnect™ Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mute/Un-Mute (Mute OFF) When you mute the Uconnect™ Phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the Uconnect™ Phone: • Press the button. • Following the beep, say “Mute”. In order to un-mute the Uconnect™ Phone: • Press the button. • Following the beep, say “Mute off”.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say “List Phones”. • The selected phone will be used for the next phone call. If the selected phone is not available, the • The Uconnect™ Phone will play the phone names of Uconnect™ Phone will return to using the highest all paired mobile phones in order from the highest to priority phone present in or near (approximately the lowest priority. To “Select” or “Delete” a paired within 30 ft (9 m)) the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Things You Should Know About Your Uconnect™ Phone Uconnect™ Phone Tutorial To hear a brief tutorial of the system features, press the button and say “Uconnect™ Tutorial.” 119 You can either press the Uconnect™ Phone button to restore the factory setting or repeat the words and phrases when prompted by the Uconnect™ Phone.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command • fully closed windows, • dry weather condition. • For best performance, adjust the rearview mirror to provide at least 1⁄2 in (1 cm) gap between the overhead • Even though the system is designed for users speaking console (if equipped) and the mirror. in North American English, French, and Spanish ac• Always wait for the beep before speaking. cents, the system may not always work for some.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • You can say “O” (letter “O”) for “0” (zero). 121 • fully closed windows, • dry weather conditions, and • operation from the driver’s seat.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: SMS Uconnect™ Phone can read or send new messages on You can send messages using Uconnect™ Phone. To send a new message: your phone. • Press the button. Read Messages: If you receive a new text message while your phone is • After the “Ready” prompt and the following beep, say connected to Uconnect™ Phone, an announcement will “SMS Send” or “Send Message.” be made to notify you that you have a new text message.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE List of Preset Messages: 11. See You in 15 minutes 1. Yes 12. I am on my way 2. No 13. I’ll be late 3. Where are you? 14. Are you there yet? 4. I need more direction. 15. Where are we meeting? 5. L O L 16. Can this wait? 6. Why 17. Bye for now 7. I love you 18. When can we meet 8. Call me 19. Send number to call 9. Call me later 20. Start without me 10.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming messages. • Press the button. Bluetooth威 Communication Link Mobile phones have been found to lose connection to the Uconnect™ Phone. When this happens, the connection can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in Bluetooth威 ON mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 3
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 3
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no other pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book 129 Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes 3
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winbutton, listen dows are closed, and the heater/air conditioning fan is options, press the Voice Command set to low. for the beep, and say your command. button while the Pressing the Voice Command system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM volume to a comfortable level while the Voice Command To switch to the AM band, say “AM” or “Radio AM”. In system is speaking. Please note the volume setting for this mode, you may say the following commands: Voice Command is different than the audio system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) 133 Disc To switch to the disc mode, say “Disc”. In this mode, you may say the following commands: Satellite Radio • “Track” (#) (to change the track) To switch to satellite radio mode, say “Sat” or “Satellite Radio”.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE − “Continue” (to continue recording) • “Switch to system setup” − “Delete” (to delete the recording) • “Change to setup” • “Play Memos” (to play previously recorded memos) • “Main menu setup” or — During the playback you may press the Voice • “Switch to setup” button to stop playing memos.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect™ vehicle. Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. 2.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seats — If Equipped The power seat switches are on the outboard side of the seat near the floor. Use the bottom switch to move the seat up, down, forward, rearward, or to tilt the seat. The top switch controls the seatback recliner. Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining The Seatback The angle of the seatback can be adjusted forward or backward. Push the seatback switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position is reached. 137 WARNING! (Continued) • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can choose from HIGH, LOW or OFF heat settings. to one, indicating the change. The LOW-level setting will Amber indicator lights in each switch indicate the level of turn OFF automatically after a maximum of 45 minutes. heat in use. Two indicator lights will illuminate for WARNING! HIGH, one for LOW and none for OFF. Press the switch once to select HIGH-level heating. Press the switch a second time to select LOW-level heating.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Pull the bar upward to move the seat forward or rearManual Front Seat Adjustment The manual seat adjustment bar is at the front of the seat, ward. Release the bar once the seat is in the position near the floor. desired. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched. WARNING! Adjusting a seat while the vehicle is moving is dangerous.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver Seat Manual Height Adjuster — If Equipped A lever style height adjustment feature enhances comfort for petite as well as tall drivers. A lever with a ratcheting mechanism, located on the outboard side of the seat, raises and lowers it. Total travel is 2.2 in (56 mm). Reclining Seats The recliner control is located on the side of the seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 3 Push Button For comfort the Active Head Restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Active Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Restraint during sudden stops. Failure to follow this warning could cause personal injury if the Active Head Restraint is deployed.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The hard seatback features a work surface and a molded When returning the rear seatback to the upright position, be sure the seatback is latched. rim for retaining items stored on the seatback panel. Fold-Flat Front Passenger Seat Folding Rear Seat To provide additional storage area, the rear seatback can be folded forward. Pull on the loops shown in the picture to fold down either or both seatbacks.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 WARNING! The rear cargo area of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children. They could be seriously injured in a collision. Children should be seated and using the proper restraint system. 3 Folding Rear Seat Center Armrest The rear seat is equipped with a folding armrest with cupholders.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. 1. Pull the hood release lever located under the left side of the instrument panel. Hood Safety Catch Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the left underside of the hood. Hood Release Lever 2. Then lift the secondary latch located under the front edge of the hood, near the center and raise the hood.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. 3 WARNING! Hood Prop Rod Hole Location Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE passing light, fog lights, instrument panel light dimming Headlights And Parking Lights and turn signals. The multifunction lever is located on Turn the end of the multifunction lever to the first detent for parking light operation. Turn to the second detent for the left side of the steering column. headlight operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 With the engine running and the multifunction lever in Automatic Headlights — If Equipped Turning the end of the multifunction lever to the third the AUTO position, the headlights will turn on and turn detent (AUTO), will activate the automatic headlight off based on the surrounding light levels. system. Headlight Time Delay There is also a feature that delays turning off the vehicle lights for 30, 60 or 90 seconds after the ignition switch is turned OFF.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beam headlights until the lever is released. 3 NOTE: If the multifunction lever is held in the flash-topass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds for the next flash-to-pass operation.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE is running, the headlight switch is off, the parking brake Rotate the center portion of the lever upward to the next is released and the shift lever is in any position except detent position to brighten the odometer and radio when the parking lights or headlights are on. PARK.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Map/Reading/Interior Lights These lights are mounted between the sun visors above the rearview mirror. Each light can be turned on by pressing the barrel. Press the barrel a second time to turn the light off. Both of these lights can swivel so that the light can be aimed at a specific spot, if desired. The lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open. To restore interior light operation, either turn the ignition switch ON or cycle the light switch. WINDSHIELD WIPERS AND WASHERS The wipers and washers are operated by a switch on the control lever.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE regulate the wipe interval from a minimum of one cycle Windshield Washers every second to a maximum of approximately 18 seconds To use the washer, pull the windshield wiper/washer control lever toward you and hold it for as long as between cycles. washer spray is desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 WARNING! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with defroster before and during windshield washer use. Mist Feature Push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray from Mist Control a passing vehicle.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE column) is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature. The headlights with wipers feature can be turned on or off through the Electronic Vehicle Information Center (EVIC) — if equipped. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerProgrammable Features)” in “Understanding Your Instrument Panel” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 outward or push it inward as desired. To lock the steering The Electronic Speed Control buttons are located on the column in position, pull the lever upward until fully right side of the steering wheel. engaged. WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. To Activate Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time. The Cruise Indicator Light will turn off. The system should be turned off when not in use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 decrease until the button is released. Release the button To Resume Speed To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release. Resume can be used at any speed will be established. above 20 mph (32 km/h). Pressing the SET (-) button once will result in a 1 mph (2 km/h) decrease in set speed.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so The HomeLink威 buttons, located on either the overhead it may be preferable to drive without Electronic Speed console, headliner or sunvisor, designate the three differControl. ent HomeLink威 channels. The HomeLink威 indicator is located above the center button. WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Before You Begin Programming HomeLink姞 Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink威 system. Erase all channels before you begin programming.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance. Programming A Rolling Code For programming garage door openers that were manufactured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is attached to the garage door opener.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 3. Simultaneously press and hold both the Homelink威 NOTE: You have 30 seconds in which to initiate the next button you want to program and the hand-held transmit- step after the LEARN button has been pressed. ter button. 6. Return to the vehicle and press the programmed 4. Continue to hold both buttons and observe the indi- HomeLink威 button twice (holding the button for two cator light. The Homelink威 indicator will flash slowly seconds each time).
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press and hold the desired HomeLink威 button until 4. Continue to hold both buttons and observe the indithe indicator light begins to flash after 20 seconds. Do not cator light. The Homelink威 indicator will flash slowly and then rapidly after Homelink威 has received the frerelease the button. quency signal from the hand-held transmitter. Release 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 to pick up the signal during programming. Similar to this Reprogramming A Single HomeLink威 Button To reprogram a channel that has been previously trained, Canadian law, some U.S. gate operators are designed to time-out in the same manner. follow these steps: It may be helpful to unplug the device during the cycling process to prevent possible overheating of the garage 2. Press and hold the desired HomeLink威 button until door or gate motor.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Watch for the HomeLink威 indicator to change flash Reprogramming A Single HomeLink威 Button rates. When it changes, it is programmed. It may take up To reprogram a channel that has been previously trained, to 30 seconds or longer in rare cases. The garage door follow these steps: may open and close while you are programming. 1. Turn the ignition switch to the ON/RUN position. 5. Press and hold the programmed HomeLink威 button 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Security Troubleshooting Tips It is advised to erase all channels before you sell or turn If you are having trouble programming HomeLink威, here in your vehicle. are some of the most common solutions: To do this, press and hold the two outside buttons for • Replace the battery in the original hand-held transmitter. 20 seconds until the red indicator flashes. Note that all channels will be erased.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The sunroof controls are mounted between the dome/ reading lights. Power Sunroof Switch 173 WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express Press the switch rearward and release it within one-half second and the sunroof will open automatically from any position. The sunroof will open fully and stop automatically. This is called “Express Open”. During Express Open operation, any movement of the sunroof switch will stop the sunroof. position. The sunroof will close fully and stop automatically. This is called “Express Close”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 NOTE: Pinch protection is disabled while the switch is windows down, or the sunroof (if so equipped) is in certain open or partially open positions. This is a normal pressed. occurrence and can be minimized. If the buffeting occurs Venting Sunroof — Express with the rear windows open, then open the front and rear Press and release the Vent button within one half second windows together to minimize the buffeting.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For vehicles equipped with the EVIC, the power sunroof switch will remain active for up to 10 minutes after the ignition switch is turned OFF. Opening either front door will cancel this feature. The time is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/ Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 A second power outlet is located inside the center con- The center console power outlet is powered directly from sole. the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting. NOTE: To ensure proper operation a MOPAR威 knob and element must be used.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your New Vehicle Limited Warranty.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 WARNING! CAUTION! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED An optional ash receiver is available from your authorized dealer and will fit in the center console front cupholder. The optional ash receiver also comes with a cigar lighter that can be used with the power outlets. Refer to “Power Outlets” in “Understanding the Features of Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 3 Rear Cupholders Rear Seat Bottle Holder There are built-in bottle holders located in both rear door trim panels. Rear Bottle Holder WARNING! If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE CONSOLE FEATURES Glovebox Storage Compartment The glovebox storage compartment is located on the right side of the instrument panel. To open the glovebox, pull outward on the latch handle located on the front of the glovebox. Storage The center console is located between the front driver and passenger seats. The center console armrest slides forward from design position to provide added user comfort.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 3 Center Console Center Console Storage Two separate storage compartments are also located The top compartment holds small items, such as a pen underneath the armrest. and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also contains a 12 Volt power outlet. The console’s front opening lid allows for easy access to these compartments.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • A notch in the front of the console base allows for use of a cellular phone while it is plugged into the power outlet with the armrest latched down. CARGO AREA FEATURES The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion. They could be seriously injured in a collision. Children should be seated and using the proper restraint system. • To help protect against personal injury, passengers should not be seated in the rear cargo area.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ski Pass-Through REAR WINDOW FEATURES There is a ski pass-through door located behind the rear Rear Window Defroster seat armrest that allows longer items, such as snow skis, The rear window defroster button is located on the to be stored in the rear cargo area. Lower the armrest and climate control (Mode) knob. Press this button to pull downward on the latch to open the ski pass-through turn on the rear window defroster and the heated outside door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! 187 CAUTION! (Continued) Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 192 ▫ EVIC Main Menu . . . . . . . . . . . . . . . . . . . . 213 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 193 ▫ Compass Display . . . . . . . . . . . . . . . . . . . . 214 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 194 ▫ Average Fuel Economy . . . . . . . . . . . . . . . . 217 䡵 Mini-Trip Computer — If Equipped . . . . . . . . 207 ▫ Distance To Empty (DTE) . . . . .
190 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Setting The Analog Clock . . . . . . . . . . . . . . . . 221 䡵 Media Center 230 (REQ) — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . 222 ▫ Operating Instructions - Radio Mode . . . . . . 222 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video) . . . 230 ▫ Notes On Playing MP3/WMA Files . . . . . . . 232 ▫ List Button (Disc Mode For MP3/WMA Play) . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operation Instructions — CD Mode For CD And MP3 Audio Play . . . . . . . . . . . . . . . . . 256 ▫ Notes On Playing MP3 Files . . . . . . . . . . . . 258 191 ▫ List Or Browse Mode . . . . . . . . . . . . . . . . . 269 ▫ Bluetooth Streaming Audio (BTSA) . . . . . . . . 271 ▫ List Button (CD Mode For MP3 Play) . . . . . . 260 䡵 Steering Wheel Audio Controls — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 272 ▫ Info Button (CD Mode For MP3 Play) . .
192 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 5 — Air Outlet — Side Window Demister Outlet — Instrument Cluster — Ignition Switch — Analog Clock 6 — Radio 7 — Passenger Airbag 8 — Glove Compartment 9 — Heated Seat Switch – If Equipped 10 — Hazard Switch 11 — Storage Compartment 12 — Climate Control 13 — Trunk Release Button 14 — Power Outlet
UNDERSTANDING YOUR INSTRUMENT PANEL 193 INSTRUMENT CLUSTER 4
194 UNDERSTANDING YOUR INSTRUMENT PANEL the engine cooling system and turning off the A/C removes this heat. You can also turn the Temperature 1. Temperature Gauge control to maximum heat, the Mode control to Floor and The temperature gauge shows engine coolant temperathe Fan control to High. This allows the heater core to act ture.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 If jump starting is required, refer to “Jump Starting 5. Low Fuel Light When the fuel level drops to approximately 2.0 gal- Procedures” in “What To Do In Emergencies”. lons (7.6 Liters), the fuel symbol will light and a 7. Air Bag Warning Light single chime will sound. This light will turn on for four to eight seconds NOTE: This light will remain on until a minimum of as a bulb check when the ignition switch is first turned to ON/RUN.
196 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to “Occupant 10. Engine Temperature Warning Light Restraints” in “Things To Know Before Starting Your This light warns of an overheated engine condition. As engine coolant temperatures rise and the Vehicle” for further information. gauge approaches H , this indicator will illuminate 9. Oil Pressure Warning Light and a single chime will sound after reaching a set This light indicates low engine oil pressure. The threshold.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 If brake failure is indicated, immediate repair is neces11. Brake Warning Light This light monitors various brake functions, sary. including brake fluid level and parking brake WARNING! application. If the brake light turns on it may indicate that the parking brake is applied, that Driving a vehicle with the brake light on is dangerthe brake fluid level is low, or that there is a problem with ous. Part of the brake system may have failed.
198 UNDERSTANDING YOUR INSTRUMENT PANEL off unless the parking brake is applied or a brake fault is NOTE: You must apply the brakes before shifting from detected. If the light does not illuminate, have the light PARK. inspected by an authorized dealer. 14. Odometer Display/Trip Odometer Display The light also will turn on when the parking brake is The odometer display shows the total distance the veapplied with the ignition switch in the ON/RUN posi- hicle has been driven. U.S.
UNDERSTANDING YOUR INSTRUMENT PANEL The two trip odometers show individual trip mileage. To switch from odometer to trip odometers, press and release the Trip Odometer button. To reset a trip odometer, display the desired trip odometer to be reset then push and hold the button until the display resets (approximately 2 seconds). Refer to “Trip Odometer Button” for additional information.
200 UNDERSTANDING YOUR INSTRUMENT PANEL gASCAP If the vehicle diagnostic system detects a leak or change in the evaporative system, or the fuel filler cap is loose, improperly installed, or damaged, the words “gASCAP” will display in the odometer display area. If this occurs, tighten the fuel filler cap properly and press the odometer reset button to turn off the “gASCAP” message. (Refer to “Onboard Diagnostic System — OBDII” in “Maintaining Your Vehicle” for further information).
UNDERSTANDING YOUR INSTRUMENT PANEL 201 4. For vehicles equipped with the Electronic Vehicle 17. Electronic Throttle Control (ETC) Indicator Light This light informs you of a problem with the Information Center (EVIC), refer to “Electronic Vehicle Electronic Throttle Control (ETC) system. If a Information Center (EVIC)”. problem is detected, the light will come on 15. Cruise Indicator — If Equipped while the engine is running.
202 UNDERSTANDING YOUR INSTRUMENT PANEL 21. Front Fog Light Indicator — If Equipped 18. Park/Headlight ON Indicator — If Equipped This indicator will illuminate when the park This indicator will illuminate when the front fog lights are on. lights or headlights are turned on. 22. Vehicle Security Light — If Equipped This light will flash rapidly for approximately 19. Electronic Stability Control (ESC) OFF Indicator 16 seconds when the alarm system is arming.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 If the ABS light remains on or comes on during driving, 24.
204 UNDERSTANDING YOUR INSTRUMENT PANEL • Each time the ignition is turned to ON/RUN, the ESC As an added safety feature, your vehicle has been system will be ON, even if it was turned off previously. equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when • The ESC system will make buzzing or clicking sounds one or more of your tires is significantly under-inflated. when it is active.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 Your vehicle has also been equipped with a TPMS CAUTION! malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is The TPMS has been optimized for the original combined with the low tire pressure telltale. When the equipment tires and wheels.
206 UNDERSTANDING YOUR INSTRUMENT PANEL the bulb does not come on when turning the key from LOCK to ON/RUN, have the condition checked promptly. Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the light after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Continuous driving with the Transmission Temperature Warning Light illuminated will eventually cause severe transmission damage or transmission failure. WARNING! If the Transmission Temperature Warning Light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. 207 29.
208 UNDERSTANDING YOUR INSTRUMENT PANEL Control Buttons RESET Button To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel. The following displays can be reset or changed: • Trip A • Trip B Trip Odometer (ODO) This display shows the distance traveled since the last reset. Press and release the STEP button on the instrument cluster to switch from odometer, to Trip A or Trip B.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 The EVIC consists of the following: ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED • Compass Heading Display (N, S, E, W, NE, NW, SE, The Electronic Vehicle Information Center (EVIC) feaSW) tures a driver-interactive display that is located in the • Mileage (Avg/MPG) instrument cluster. • Miles To Empty • Low Tire Information (Tire Pressure Monitor System (TPMS) Displays) — if equipped • Timer • Units • System Warnings (Door Ajar, etc.
210 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by pressing the following buttons on the instrument panel switch bank located below the climate controls: Press and release the MENU button to advance the display to each of the EVIC Main Menu features. Upon reaching the last item in the MENU Main Menu the EVIC will advance to the first Button item in the Main Menu with the next MENU button press and release.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 Press and release the SELECT Button to accept • Right Rear Turn Signal Lamp Out (with a single a selection. The SELECT Button also resets chime) various Trip Functions.
212 UNDERSTANDING YOUR INSTRUMENT PANEL • Key In Ignition • Remote start aborted — Door ajar • Remote start aborted — Hood ajar • Remote start aborted — Trunk ajar • Remote start aborted — Fuel low • Remote start disabled — System fault • Oil Change Required (with a single chime) • Low Tire (with a graphic of the car showing which tire(s) is/are low - with a single chime). Refer to ⬙Tire Pressure Monitoring System⬙ in ⬙Starting and Operating⬙.
UNDERSTANDING YOUR INSTRUMENT PANEL 2. Fully depress the accelerator pedal slowly three times • within 10 seconds. • 3. Turn the ignition switch to the LOCK position. • NOTE: If the indicator message illuminates when you • start the vehicle, the oil change indicator system did not • reset. If necessary repeat this procedure. EVIC Main Menu To step to each main menu feature press and release the MENU button once for each step.
214 UNDERSTANDING YOUR INSTRUMENT PANEL After three seconds without pressing SELECT, RESET Automatic Compass Calibration ALL will return to RESET and only the selected feature This compass is self-calibrating, which eliminates the need to calibrate the compass manually. When the vewill have been reset. hicle is new, the compass may appear erratic and the Compass Display EVIC will flash the “CAL” indicator until the compass is The compass heading indicates the direction calibrated.
UNDERSTANDING YOUR INSTRUMENT PANEL Manual Compass Calibration If the compass appears erratic or inaccurate, and the variance has been properly set, you may wish to manually recalibrate the compass. To manually calibrate the compass: 215 5. Drive the vehicle slowly (under 5 mph / 8 km/h), completing one or more circles (in an area free from large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally. Compass Variance 1. Start the engine.
216 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Magnetic and battery powered devices, (such as cell phones, iPod’s, radar detectors, PDA’s and laptops) should be kept away from the top of the instrument panel. This is where the compass module is located and such devices may interfere and cause false compass readings. To Change Compass Variance: 1. Turn the ignition switch to the ON position. Leave the shift lever in PARK. 2. Press and release the MENU button until “Personal Settings” displays in the EVIC.
UNDERSTANDING YOUR INSTRUMENT PANEL Average Fuel Economy 217 When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of ⬙LOW FUEL”. This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the LOW FUEL text and a new DTE value will display. Shows the average fuel economy since the last reset.
218 UNDERSTANDING YOUR INSTRUMENT PANEL • If the Tire Pressure System requires service, ⬙Check EVIC Units Selection (UNITS IN Display) TPM System⬙ is displayed. Tire PSI is an information Displays the units used for the Outside Temperature, only function and cannot be reset. Average Fuel Economy, Distance to Empty and Tire Elapsed Time Pressure features. Press and Release the SELECT button to toggle units between ⬙U.S.⬙ and ⬙METRIC⬙. Shows the total elapsed time of travel since the last reset.
UNDERSTANDING YOUR INSTRUMENT PANEL Personal Settings (Customer-Programmable Features) Personal Settings allows the driver to set and recall features when the automatic transaxle is in PARK. 219 Auto Unlock on Exit When ON is selected and the transaxle is in the PARK or NEUTRAL position, all doors will unlock when the driver’s door is opened. To make your selection, press the SELECT button until ON or OFF appears.
220 UNDERSTANDING YOUR INSTRUMENT PANEL Sound Horn with Lock When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This feature may be selected with or without the Flash Lamp with Lock feature. To make your selection, press and release the SELECT button until ON or OFF appears.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Opening either front vehicle door will cancel this feature. SETTING THE ANALOG CLOCK To make your selection, press the SELECT button until To set the analog clock, located at the top center of the Off, 45 sec., 5 min., or 10 min. appears. instrument panel, press and hold the button in until the Illumin. Approach setting is correct.
222 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate. Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped With Uconnect Phone” message will display on the radio screen.
224 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure INFO Button Press the INFO button for an RDS station (one with call 1. Press and hold the TIME button until the hours blink. letters displayed). The radio will return a Radio Text 2. Adjust the hours by turning the right side TUNE/ message broadcast from an FM station (FM mode only). SCROLL control knob. RW/FF 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be sePush the rotary TUNE/SCROLL control knob a third lected.
226 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Information Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk 16-Digit Character Display Inform Jazz News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R & B Sports Talk Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will b
UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote control to scroll up and down the menu (if equipped). 227 • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped).
228 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Home Clock - Pressing the SELECT button allows you to set the clock. Turn the TUNE/SCROLL control knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the minutes. Press the TUNE/SCROLL control knob again to save changes. Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc).
UNDERSTANDING YOUR INSTRUMENT PANEL Audio DRC — If Equipped Selecting this item allows you to limit maximum audio dynamic range. The default is set to ⬙High,⬙ and under this setting, dialogues will play at 11 db higher than if the setting is ⬙Normal.⬙ 229 a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-preferred settings. AM and FM Buttons Press the buttons to select AM or FM mode.
230 UNDERSTANDING YOUR INSTRUMENT PANEL both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play, DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton position to operate the radio. with the corresponding number (1-6) where the LOAD Button — Loading Compact Disc(s) CD was loaded and the disc will unload and Press the LOAD button and the pushbutton with the move to the entrance for easy removal.
232 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (CD MODE) Notes On Playing MP3/WMA Files Press the SCAN button to scan through each track on the The radio can play MP3/WMA files; however, acceptable CD currently playing. MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the TIME Button (CD MODE) following restrictions. Press this button to change the display from a large CD playing time display to a small CD playing time display.
UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 233 If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files • Maximum number of characters in file/folder names: named with the *.
234 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48 160, 128, 144, 112, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 WMA Specification Sampling Frequency (kHz) Bit Rate (kbps) 44.1 and 48 48, 64, 96, 128, 160, 192 VBR WMA Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files).
236 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. Operating Instructions — Voice Command System (If Equipped) For the radio, Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details.
UNDERSTANDING YOUR INSTRUMENT PANEL Macrovision This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. 237 NOTE: Sirius service is not available in Hawaii and has limited coverage in Alaska.
238 UNDERSTANDING YOUR INSTRUMENT PANEL placed within the line of sight of the antenna will cause decreased performance. Larger luggage items such as To access the ESN/SID, refer to the following steps: bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly ESN/SID Access With the ignition switch in the ON/RUN or ACC posi- on or above the antenna.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 Operating Instructions - Uconnect™ Multimedia (Satellite) Mode INFO Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if availNOTE: The ignition switch must be in the ON/RUN or able). Also, pressing and holding the INFO button for an ACC position to operate the radio.
240 UNDERSTANDING YOUR INSTRUMENT PANEL or turning the TUNE/SCROLL control knob within five SET Button – To Set the Pushbutton Memory seconds will allow the program format type to be selected. When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. Toggle the MUSIC TYPE button again to select the music The symbol SET 1 will now show in the display window. type.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 Buttons 1 - 6 MEDIA CENTER 130 (SALES CODE RES) These buttons tune the radio to the channels that you NOTE: The radio sales code is located on the lower right commit to pushbutton memory (12 Satellite stations). side of the radio faceplate. MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ RHB) CD/DVD/HDD/NAV — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate.
242 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio. to seek up and the left switch to seek down. The radio Power Switch/Volume Control (Rotary) will remain tuned to the new station until you make Push the ON/VOLUME control knob to turn on the another selection. Holding either button will bypass radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 243 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the knob to save time change. mid-range tones. 5. To exit, press any button/knob, or wait five seconds. Push the rotary TUNE/SCROLL control knob a third RW/FF time and TREBLE will display.
244 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory. exit setting tone, balance, and fade. The stations stored in SET 2 memory can be selected by AM/FM Button pressing the pushbutton twice. Press the buttons to select either AM or FM mode. Every time a preset button is used, a corresponding SET/RND Button — To Set the Pushbutton button number will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC seconds. Play will begin at the start of track 1. position to operate the radio.
246 UNDERSTANDING YOUR INSTRUMENT PANEL If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold the FF (Fast Forward) button and the CD player will begin to fast forward until FF is released, or the radio will reinsert the CD but will not play it. RW or another CD button is pressed. The RW (Reverse) A disc can be ejected with the radio and ignition OFF. button works in a similar manner.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 Notes on Playing MP3 Files • Maximum number of files: 255 The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited. For large numbers writing MP3 files, pay attention to the following restricof files and/or folders, the radio may be unable to tions.
248 UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
250 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio. side of the radio faceplate. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. 251 Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature (if equipped). Refer to “Uconnect™ Phone” in “Understanding The Features Of Your Vehicle”.
252 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, press the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text will begin to blink. message broadcast from an FM station (FM mode only). 4. Adjust the minutes using the right side TUNE/ SCROLL control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be sePush the rotary TUNE/SCROLL control knob a third lected.
254 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Information Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk 16-Digit Character Display Inform Jazz News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be
UNDERSTANDING YOUR INSTRUMENT PANEL hours, press the TUNE/SCROLL control knob to set the minutes. The minutes will begin to blink. Adjust the minutes using the right side TUNE/SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. AM/FM Button Press the button to select either AM or FM mode. SET/RND Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button.
256 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC seconds. Play will begin at the start of track 1. position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or the radio will reinsert the CD but will not play it. another CD button is pressed. The RW (Reverse) button A disc can be ejected with the radio and ignition OFF. works in a similar manner.
258 UNDERSTANDING YOUR INSTRUMENT PANEL Notes On Playing MP3 Files • Maximum number of files: 255 The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited. For large numbers writing MP3 files, pay attention to the following restricof files and/or folders, the radio may be unable to tions.
UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
260 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to ⬙elapsed time⬙ display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. 261 TIME Button (Auxiliary Mode) Press this button to change the display to time of day.
262 UNDERSTANDING YOUR INSTRUMENT PANEL radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at www.siriuscanada.ca for Canadian residents. using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will • The vehicle is parked in an underground parking remain tuned to the new channel until you make another structure or under a physical obstacle. selection.
264 UNDERSTANDING YOUR INSTRUMENT PANEL By pressing the SEEK button when the Music Type RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons function is active, the radio will be tuned to the next causes the tuner to search for the next channel in the channel with the same selected Music Type name. direction of the arrows.
UNDERSTANDING YOUR INSTRUMENT PANEL Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within five seconds after pressing the SET button, the channel will continue to play but will not be stored into pushbutton memory. You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2.
266 UNDERSTANDING YOUR INSTRUMENT PANEL iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威 and iPhone威 devices. Some iPod威 software versions may not fully support the iPod威 control features. Please visit Apple’s website for software updates. NOTE: • If the radio has a USB port, refer to the appropriate Uconnect™ Multimedia radio User’s Manual for iPod威 or external USB device support capability.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 NOTE: If the audio device battery is completely discharged, it may not communicate with the iPod威/USB/ MP3 control system until a minimum charge is attained. Leaving the audio device connected to the iPod威/USB/ MP3 control system may charge it to the required level.
268 UNDERSTANDING YOUR INSTRUMENT PANEL • Turning it clockwise (forward) by one click, while playing a track, skips to the next track or press the VR button and say ⬙Next Track⬙. during play mode will jump to the next track in the list, or press the VR button and say ⬙Next or Previous Track⬙.
UNDERSTANDING YOUR INSTRUMENT PANEL SCAN button again. During Scan mode, pressing the << SEEK and SEEK >> buttons will select the previous and next tracks. • RND button (available on sales code RES radio only): Pressing this button toggles between Shuffle ON and Shuffle OFF modes for the iPod威 or external USB device, or press the VR button and say ⬙Shuffle ON⬙ or ⬙Shuffle Off⬙. If the RND icon is showing on the radio display, then the shuffle mode is ON.
270 UNDERSTANDING YOUR INSTRUMENT PANEL • Preset 2 – Artists • Preset 3 – Albums • Preset 4 – Genres • Preset 5 – Audiobooks • Preset 6 – Podcasts • Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • To exit List mode without selecting a track, press the same PRESET button again to go back to Play mode. • LIST button: The LIST button will display the top level menu of the iPod威 or external USB device.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 Play Mode When switched to BTSA mode, some audio devices can Do not plug in or remove the iPod威 or external USB start playing music over the vehicle’s audio system, but device while driving. Failure to follow this warning some devices require the music to be initiated on the device first, then it will get streamed to the Uconnect™ could result in an accident. phone system.
272 UNDERSTANDING YOUR INSTRUMENT PANEL Next Track STEERING WHEEL AUDIO CONTROLS — IF Use the SEEK UP button, or press the VR button on the EQUIPPED radio and say “Next Track” to jump to the next track music on your cellular phone. Previous Track Use the SEEK DOWN button, or press the VR button on the radio and say “Previous Track” to jump to the previous track music on your cellular phone. Browse Browsing is not available on a BTSA device. Only the current song that is playing will display info.
UNDERSTANDING YOUR INSTRUMENT PANEL The right-hand rocker switch has a pushbutton in the center, and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume. Pressing the bottom of the rocker switch will decrease the volume. Pressing the center button changes the operation of the radio from AM to FM, or to CD mode, depending on which radio is in the vehicle.
274 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particuCD/DVD DISC MAINTENANCE To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known 1. Handle the disc by its edge; avoid touching the good disc before considering disc player service. surface. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL Manual Heating And Air Conditioning 275 Blower Control Rotate this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position. There are four blower speeds. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left in the “O” (Off) position.
276 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Control Mode Control (Air Direction) Rotate this control to regulate the temRotate this control to choose from sevperature of the air inside the passenger eral patterns of air distribution. You compartment. Rotating the dial left can select either a primary mode as into the blue area of the scale indicates identified by the symbols on the concooler temperatures, while rotating trol, or a blend of two of these modes.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 NOTE: For all settings, except full cold or full hot, there Defrost is a difference in temperature between the upper and Air is directed through the windshield and side window demist outlets. Use this mode with maxilower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but mum blower and temperature settings for best windshield and side window defrosting. cool conditions.
278 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • When the ignition switch is turned to the LOCK • Continuous use of the Recirculation mode may make position, the recirculation feature will be cancelled. the inside air stuffy and window fogging may occur. Air Conditioning Control Extended use of this mode is not recommended. Press this button to engage the Air • The use of the Recirculation mode in cold or damp Conditioning.
UNDERSTANDING YOUR INSTRUMENT PANEL 279 • ECONOMY MODE If economy mode is desired, press the A/C button to turn OFF the indicator light and the A/C compressor. Then, move the temperature control to the desired temperature. Automatic Operation The Automatic Temperature Control system automatically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger. Automatic Temperature Control (ATC) — If Equipped Operation of the system is quite simple. 1.
280 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Dial in the temperature you would • Pressing the Air Conditioning Control button while in like the system to maintain by rotating AUTO mode will cause the LED in the control button the Temperature Control knob. Once to flash three times and then turn off. This indicates the comfort level is selected, the systhat the system is in AUTO mode and requesting the tem will maintain that level automatiair conditioning is not necessary. cally using the heating system.
UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control For full automatic operation or for automatic blower operation, turn the knob to the AUTO position. In manual mode there are seven blower speeds that can be individual selected. In off position the blower will shut off. Manual Operation This system offers a full complement of manual override features, which consist of Blower Preferred Automatic, 281 Mode Preferred Automatic, or Blower and Mode Preferred Automatic.
282 UNDERSTANDING YOUR INSTRUMENT PANEL
UNDERSTANDING YOUR INSTRUMENT PANEL 283 The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets. • Panel Air is directed through the outlets in the instrument • Mix Air is directed through the floor, defrost, and side panel. These outlets can be adjusted to direct airflow.
284 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • Air Conditioner Control Press this button to turn on the air • When the ignition switch is turned to the LOCK position, the recirculation feature will be cancelled. conditioning during manual operation only. When the air conditioning is • In cold weather, use of the Recirculation mode may turned on, cool dehumidified air will lead to excessive window fogging.
UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
286 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather.
UNDERSTANDING YOUR INSTRUMENT PANEL 287 Control Setting Suggestions for Various Weather Conditions 4
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 294 䡵 Automatic Transmission . . . . . . . . . . . . . . . . . 297 ▫ Automatic Transmission . . . . . . . . . . . . . . . 294 ▫ Automatic Transmission Ignition Interlock Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 294 ▫ Extreme Cold Weather (Below –20°F Or ⫺29°C) . . . . . . . . . . . . . . . 295 ▫ If Engine Fails To Start . . . .
290 STARTING AND OPERATING ▫ Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 308 䡵 Anti-Lock Brake System (ABS) . . . . . . . . . . . . 324 䡵 AutoStick威 — If Equipped . . . . . . . . . . . . . . . 315 䡵 Electronic Brake Control System . . . . . . . . . . . 326 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . 315 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . 327 ▫ General Information . . . . . . . . . . . . . . . . . . 316 ▫ Traction Control System (TCS) . . . . . . .
STARTING AND OPERATING 䡵 Tires — General Information 291 . . . . . . . . . . . . . 341 䡵 Tire Chains . . . . . . . . . . . . . . . . . . . . . . . . . . 350 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . 341 䡵 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 351 ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . 342 䡵 Tire Rotation Recommendations . . . . . . . . . . . 351 ▫ Radial-Ply Tires . . . . . . . . . . . . . . . . . . . . .
292 STARTING AND OPERATING ▫ Fuel System Cautions . . . . . . . . . . . . . . . . . 363 䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 368 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . 364 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . 368 䡵 Flexible Fuel (3.6L Engine Only) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 365 ▫ Loose Filler Cap Message . . . . . . . . . . . . . . 371 ▫ E-85 General Information . . . . . . . . . . . . . . .
STARTING AND OPERATING 293 ▫ Trailer Towing Weights 䡵 Recreational Towing (Maximum Trailer Weight Ratings) . . . . . . . . 376 (Behind Motorhome, Etc.) . . . . . . . . . . . . . . . . 383 ▫ Trailer And Tongue Weight . . . . . . . . . . . . . 377 ▫ Towing Requirements . . . . . . . . . . . . . . . . . 378 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . 382 ▫ Towing This Vehicle Behind Another Vehicle . . . . . . . . . . . . . . . . 383 ▫ Recreational Towing – All Models . . . . . . . .
294 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
STARTING AND OPERATING 295 For vehicles equipped with Tip Start (Six-Speed Trans- If Engine Fails To Start mission), turn the ignition switch to the START position WARNING! and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage auto• Never pour fuel or other flammable liquids into matically when the engine is running.
296 STARTING AND OPERATING Without Tip Start If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” procedures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded.
STARTING AND OPERATING 297 CAUTION! The engine block heater must be plugged in at least one hour to have an adequate warning effect on the engine. To prevent damage to the starter, wait 10 to 15 seconds before trying again. WARNING! After Starting The idle speed will automatically decrease as the engine warms up. Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution.
298 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly pressing on the brake pedal. • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed.
STARTING AND OPERATING WARNING! (Continued) 299 Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Interlock which requires the shift lever to be placed in PARK before the ignition switch can be turned to the LOCK/ OFF position. The key fob can only be removed from the ignition when the ignition is in the LOCK/OFF position and once removed the shift lever is locked in PARK. • Unintended movement of a vehicle could injure those in and near the vehicle.
300 STARTING AND OPERATING Four-Speed Automatic Transmission — If Equipped The shift lever position display (located in the instrument panel cluster) indicates the transmission gear range. You must press the brake pedal to move the shift lever out of the PARK position (refer to “Brake/Transmission Shift Interlock System” in this section). To drive, move the shift lever from PARK or NEUTRAL to the DRIVE position.
STARTING AND OPERATING 301 WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Your vehicle could move and injure you and others if it is not completely in PARK. Check by trying to move the shift lever rearward (with the brake pedal released) after you have placed it in PARK. Make sure the transmission is in PARK before leaving the vehicle.
302 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the ignition key. Once the key is removed, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
STARTING AND OPERATING CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. 303 • With brake pedal released, verify that the shift lever will not move out of PARK. REVERSE This range is for moving the vehicle backward.
304 STARTING AND OPERATING CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage. Refer to “Recreational Towing” in “Starting And Operating” and “Towing A Disabled Vehicle” in What To Do In Emergencies” for further information. DRIVE This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy.
STARTING AND OPERATING 305 limited to second gear only. Normal operation will re- Transmission Limp Home Mode sume once the transmission temperature has risen to a Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could suitable level. result in transmission damage, Transmission Limp Home DRIVE 3 Mode is activated. In this mode, the transmission remains This range eliminates shifts into fourth gear.
306 STARTING AND OPERATING 4. Wait approximately 10 seconds. Overdrive Operation The automatic transmission includes an electronically 5. Restart the engine. controlled Overdrive (fourth gear). The transmission will 6. Shift into the desired gear range. If the problem is no automatically shift into the Overdrive gear if the followlonger detected, the transmission will return to normal ing conditions are present: operation.
STARTING AND OPERATING 307 Torque Converter Clutch A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in the upper gears. When the vehicle speed drops or during some accelerations, the clutch automatically disengages.
308 STARTING AND OPERATING Shifting from DRIVE to PARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears. The transmission shift lever has PARK, REVERSE, NEUTRAL, DRIVE, and AutoStick威 shift positions. Manual shifts can be made using the AutoStick威 shift control (refer to “AutoStick威” in “Starting And Operating” for further information).
STARTING AND OPERATING PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the PARK position first, and then apply the parking brake.
310 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal.
STARTING AND OPERATING 311 WARNING! (Continued) CAUTION! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.
312 STARTING AND OPERATING • With brake pedal released, verify that the shift lever will not move out of PARK. REVERSE This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage.
STARTING AND OPERATING When frequent transmission shifting occurs (such as when operating the vehicle under heavy loading conditions, in hilly terrain, traveling into strong head winds, or while towing heavy trailers), use the AutoStick威 mode (refer to “AutoStick威” in “Starting And Operating” for further information) to select a lower gear range. Under these conditions, using a lower gear range will improve performance and extend transmission life by reducing excessive shifting and heat buildup.
314 STARTING AND OPERATING 2. Shift the transmission into PARK. 3. Turn the ignition switch to the LOCK/OFF position. 4. Wait approximately 10 seconds. 5. Restart the engine. Overdrive Operation The automatic transmission includes an electronically controlled Overdrive (sixth gear). The transmission will automatically shift into the Overdrive gear if the following conditions are present: • the shift lever is in the DRIVE position, 6. Shift into the desired gear range.
STARTING AND OPERATING A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in the upper gears. When the vehicle speed drops or during some accelerations, the clutch automatically disengages. NOTE: The torque converter clutch will not engage until the transmission fluid and engine coolant are warm [usually after 1 to 3 miles (1.6 to 4.8 km) of driving].
316 STARTING AND OPERATING AutoStick威 is deactivated when the shift lever is moved • The transmission will automatically shift up when from the AutoStick (+/-) position into the DRIVE maximum engine speed is reached while AutoStick威 is position. engaged. General Information • Transmission shifting will be more noticeable when AutoStick威 is engaged. • You can start out, from a stop, in any gear except sixth.
STARTING AND OPERATING WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have a collision. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow, wet, mud, loose sand, etc.). Traction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface.
318 STARTING AND OPERATING Flowing/Rising Water WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly. Failure to follow this warning may result in injuries that are serious or fatal to you, your passengers, and others around you.
STARTING AND OPERATING 319 CAUTION! (Continued) WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
320 STARTING AND OPERATING POWER STEERING • Upon initial start-up in cold weather, the power steerThe standard power steering system will give you good ing pump may make noise for a short amount of time. vehicle response and increased ease of maneuverability This is due to the cold, thick fluid in the steering in tight spaces. The system will provide mechanical system. This noise should be considered normal, and it steering capability if power assist is lost.
STARTING AND OPERATING Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized dealer. CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components.
322 STARTING AND OPERATING PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave the transmission in PARK. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible. To release the parking brake, pull the lever up slightly, press the center button, then lower the lever completely.
STARTING AND OPERATING When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. Apply the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. The parking brake should always be applied whenever the driver is not in the vehicle. WARNING! • Never use the PARK position as a substitute for the parking brake.
324 STARTING AND OPERATING CAUTION! WARNING! If the “Brake Warning Light” remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer. Just press firmly on your brake pedal when you need to slow down or stop.
STARTING AND OPERATING 325 • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the user’s safety or the safety of others. If the “Anti-Lock Brake Warning Light” is on, the brake system should be serviced as soon as possible to restore the benefits of anti-lock brakes. If the “Anti-Lock Brake Warning Light” does not come on when the ignition switch is turned to the ON position, have the bulb repaired as soon as possible.
326 STARTING AND OPERATING ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops.
STARTING AND OPERATING 327 vehicle stability and control in various driving conditions brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. and are commonly referred to as ESC. This feature remains active even if TCS and ESC are in Anti-Lock Brake System (ABS) the “Partial Off” mode. Refer to “Electronic Stability This system aids the driver in maintaining vehicle control Control (ESC)” in this section of this manual.
328 STARTING AND OPERATING WARNING! • The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning.
STARTING AND OPERATING WARNING! Electronic Stability Control (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. ESC also cannot prevent accidents resulting from loss of vehicle control due to inappropriate driver input for the conditions.
330 STARTING AND OPERATING reduction. This mode is intended to be used if the vehicle To turn ESC on again, momentarily press the “ESC Off” is in deep snow, sand, or gravel conditions and more switch. This will restore the normal “ESC On” mode of wheel spin than ESC would normally allow is required to operation. gain traction. WARNING! In partial ESC mode, the engine power reduction feature of ESC is disabled. Therefore, enhanced vehicle stability offered by the ESC system is reduced.
STARTING AND OPERATING ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running. If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
332 STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation.
STARTING AND OPERATING 333 compact spare tires have the letter “T” or “S” molded • High flotation tire sizing is based on U.S. design into the sidewall preceding the size designation. Exstandards and it begins with the tire diameter molded ample: T145/80D18 103M. into the sidewall. Example: 31x10.5 R15 LT. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....
334 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. 335 Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
336 STARTING AND OPERATING Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
STARTING AND OPERATING Tire Loading And Tire Pressure 337 Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
338 STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard and in the “Vehicle Loading” section of this manual.
STARTING AND OPERATING 339 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if “XXX” • The following table shows examples on how to calculate total load, cargo/luggage, and towing capacities amount equals 1,400 lbs (635 kg) and there will be five of your vehicle with varying seating configurations 150 lb (68 kg) passengers in your vehicle, the amount of and number and size of occupants.
340 STARTING AND OPERATING
STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
342 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Tire Inflation Pressures The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or rear edge of the driver’s side door.
STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. 343 Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
344 STARTING AND OPERATING Tire Pressures For High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
STARTING AND OPERATING 345 vehicle. If your vehicle has this option refer to an Compact Spare Tire – If Equipped authorized tire dealer for the recommended tire rotation The compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a pattern.
346 STARTING AND OPERATING WARNING! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control.
STARTING AND OPERATING WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressure listed on your Tire and Loading Information Placard located on the driver’s side door opening. Replace (or repair) the original equipment tire at the first opportunity and reinstall it on your vehicle.
348 STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced.
STARTING AND OPERATING 349 Keep dismounted tires in a cool, dry place with as little It is recommended to replace the two front tires or two exposure to light as possible. Protect tires from contact rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling. If you ever replace a with oil, grease, and gasoline. wheel, make sure that the wheel’s specifications match Replacement Tires those of the original wheels.
350 STARTING AND OPERATING WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
STARTING AND OPERATING 351 poorer than that of non-studded tires. Some states proSNOW TIRES Some areas of the country require the use of snow tires hibit studded tires; therefore, local laws should be during the winter. All season tires can be identified by the checked before using these tire types. M+S designation on the tire sidewall.
352 STARTING AND OPERATING The suggested rotation method is the “rearward cross” shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be reversed. Tire Rotation TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.5°C).
STARTING AND OPERATING The TPM System will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The TPM System will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure.
354 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
STARTING AND OPERATING 355 • Seasonal temperature changes will affect tire pressure, Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will and the TPMS will monitor the actual tire pressure in illuminate in the instrument cluster, a ⬙LOW TIRE⬙ the tire.
356 STARTING AND OPERATING Check TPMS Warning The “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and then remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. The “Tire Pressure Monitoring Telltale Light” will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 5.
STARTING AND OPERATING 357 4. For each subsequent ignition key cycle, a chime will NOTE: It is particularly important for you to check the sound and the “Tire Pressure Monitoring Telltale Light” tire pressure in all of the tires on your vehicle monthly will flash on and off for 75 seconds and then remain on and to maintain the proper pressure. solid. The TPMS consists of the following components: 5.
358 STARTING AND OPERATING more of the four active road tires. In addition, the Electronic Vehicle Information Center (EVIC) will display a graphic showing the pressure values of each tire with the low tire pressure values flashing. addition, the EVIC will display a ⬙CHECK TPM SYSTEM⬙ message for a minimum of five seconds and then display dashes (- -) in place of the pressure value to indicate which sensor is not being received.
STARTING AND OPERATING 359 3. Lots of snow or ice around the wheels or wheel 2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning housings. limit, upon the next ignition key cycle, the “Tire Pressure 4. Using tire chains on the vehicle. Monitoring Telltale Light” will remain ON, a chime will 5. Using wheels/tires not equipped with TPM sensors.
360 STARTING AND OPERATING 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically. In addition, the “Tire Pressure Monitoring Telltale Light” will turn OFF and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long no tire pressure is below the low-pressure warning limit in any of the four active road tires.
STARTING AND OPERATING 361 as hard starting, stalling, and hesitations. If you experi- The manufacturer supports the use of reformulated gasoence these symptoms, try another brand of gasoline line. Properly blended reformulated gasoline will provide excellent performance and durability of engine and before considering service for the vehicle. fuel system components.
362 STARTING AND OPERATING Problems that result from using gasoline containing To fix a Non-FFV vehicle inadvertently fueled once with Methanol or gasoline containing more than 10% Ethanol E-85 perform the following: are not the responsibility of the manufacturer and may • change the engine oil and oil filter not be covered under warranty.
STARTING AND OPERATING 363 therefore, you should ask your gasoline retailer whether Fuel System Cautions the gasoline contains MMT. It is even more important to CAUTION! look for gasoline without MMT in Canada, because MMT can be used at levels higher than those allowed in the Follow these guidelines to maintain your vehicle’s United States. MMT is prohibited in Federal and Califorperformance: nia reformulated gasoline. • The use of leaded gas is prohibited by Federal law.
364 STARTING AND OPERATING CAUTION! (Continued) • The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer. NOTE: Intentional tampering with the emissions control system can result in civil penalties being assessed against you.
STARTING AND OPERATING WARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. • Keep the trunk closed when driving your vehicle to prevent carbon monoxide and other poisonous exhaust gases from entering the vehicle.
366 STARTING AND OPERATING CAUTION! Only vehicles with the E-85 fuel filler door label can operate on E-85. Fuel Requirements Your vehicle will operate on both unleaded gasoline with an octane rating of 87, or E-85 fuel, or any mixture of these two. For best results, a refueling pattern that alternates between E-85 and unleaded gasoline should be avoided.
STARTING AND OPERATING 367 NOTE: • When the ambient temperature is above 90° F (32° C), you may experience hard starting and rough idle following start up even if the above recommendations are followed. requirements of Material Standard MS-6395. MS-6395 contains additional requirements, developed during extensive fleet testing, to provide additional protection to Chrysler Group LLC engines. Use MOPAR威 or an equivalent oil meeting the specification MS-6395.
368 STARTING AND OPERATING Cruising Range Maintenance Because E-85 fuel contains less energy per gallon/liter CAUTION! than gasoline, you will experience an increase in fuel consumption. You can expect your miles per gallon Do not use ethanol mixture greater than 85% in your (mpg)/miles per liter and your driving range to decrease vehicle. It will cause difficulty in cold starting and by about 30%, compared to gasoline operation. may affect driveability.
STARTING AND OPERATING 369 5 Fuel Filler Door Tether Cable After removing the gas cap, place the gas cap tether cable NOTE: If the gas cap is lost or damaged, be sure the over a hook on the inside of the fuel door. This keeps the replacement cap is for use with this vehicle. gas cap suspended away from and protects the vehicle’s surface.
370 STARTING AND OPERATING CAUTION! WARNING! (Continued) • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on. • To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. • Never add fuel when the engine is running.
STARTING AND OPERATING Loose Filler Cap Message If the vehicles diagnostic system determines that the fuel filler cap in loose, improperly installed, or damaged, a “gASCAP” message will be displayed in the instrument cluster. Tighten the gas cap until a “clicking” sound is heard. This is an indication that the gas cap is properly tightened. Press the trip odometer reset button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started.
372 STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GAWR.
STARTING AND OPERATING Loading To load your vehicle properly, first figure out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving. If weighing the loaded vehicle shows that you have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight.
374 STARTING AND OPERATING rear GAWR. Refer to “Vehicle Loading/Vehicle CertificaGross Trailer Weight (GTW) The GTW is the weight of the trailer plus the weight of all tion Label” in “Starting and Operating” for further cargo, consumables and equipment (permanent or tem- information. porary) loaded in or on the trailer in its ⬙loaded and WARNING! ready for operation⬙ condition. The recommended way to measure GTW is to put your fully loaded trailer on a vehicle scale.
STARTING AND OPERATING Weight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the truck. These kinds of hitches are the most popular on the market today and they are commonly used to tow small- and mediumsized trailers. 375 Trailer Hitch Classification Definitions Class Max.
376 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum Trailer Weight Ratings Max. GTW Max. Trailer Tongue Wt. Engine/Transmission Max. Frontal Area (Gross Trailer Wt.) (See Note 1) 11 sq.ft. (1.0 sq.m) 2.4L/Auto 1,000 lbs (450 kg) 100 lbs (45 kg) (See Note 2) 3.6L/Auto 22 sq.ft. (2.0 sq.
STARTING AND OPERATING 377 CAUTION! Towing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme conditions. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
378 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to “Tire Safety Information/Tire and Loading Information Placard” in “Starting and Operating” for the maximum combined weight of occupants and cargo for your vehicle.
STARTING AND OPERATING WARNING! 379 WARNING! (Continued) Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and that it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision.
380 STARTING AND OPERATING WARNING! (Continued) 3. GAWR 4. Trailer tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve 10% of trailer tongue weight as a percentage of total trailer weight). • Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tires – General Information” in “Starting and Operating” for information on tread wear indicators and for proper inspection procedure.
STARTING AND OPERATING • An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. • Trailer brakes are recommended for trailers over 1,000 lbs (450 kg) and required for trailers in excess of 2,000 lbs (907 kg).
382 STARTING AND OPERATING If you REGULARLY TOW a trailer for more than 45 minutes of continuous operation, then change the automatic transmission fluid and filter according to the interval specified for “police, taxi, fleet, or frequent trailer towing.” Refer to the “Maintenance Schedule” for the proper Make sure all trailer and vehicle lights are working maintenance intervals. properly — including hazard flashers.
STARTING AND OPERATING 383 Cooling System • Highway Driving To reduce potential for engine and transmission over- Reduce speed. heating, take the following actions: • Air Conditioning Turn off temporarily. • City Driving When stopped for short periods of time, shift the transmission into NEUTRAL and increase engine idle speed. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.
384 STARTING AND OPERATING Recreational Towing – All Models Recreational towing is allowed ONLY if the front wheels are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this procedure: 1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer’s instructions. 2. Drive the front wheels onto the tow dolly. 3. Firmly apply the parking brake. Place the transmission in PARK. 4.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 386 ▫ Road Tire Installation . . . . . . . . . . . . . . . . . 396 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 386 䡵 Jump-Starting . . . . . . . . . . . . . . . . . . . . . . . . 398 ▫ Engine Oil Overheating (2.4L Engine Only) — If Equipped . . . . . . . . . . . . . . . . . . . . . . 387 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 388 ▫ Jack Location . . . . . . . . . . . . . . . . . .
386 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional • On the highways — Slow down.
WHAT TO DO IN EMERGENCIES 387 NOTE: There are steps that you can take to slow down Engine Oil Overheating (2.4L Engine Only) — If an impending overheat condition: Equipped During sustained high-speed driving or trailer tow up • If your air conditioner (A/C) is on, turn it off. The A/C long grades on a hot day, the engine oil temperature may system adds heat to the engine cooling system and become too hot. If this happens, the “HOTOIL” message turning the A/C off can help remove this heat.
388 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
WHAT TO DO IN EMERGENCIES 389 WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on the Hazard Warning flashers. 3. Set the parking brake. 4. Place the shift lever into PARK (automatic transmission) or REVERSE (manual transmission). Spare Tire and Jack Stowage Preparations For Jacking 1. Park the vehicle on a firm, level surface.
390 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES WARNING! (Continued) • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. Jack Warning Label 391 CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle.
392 WHAT TO DO IN EMERGENCIES NOTE: The jack handle attaches to the side of the jack with two attachment points. When the jack is partially expanded, the tension between the two attachment points holds the jack handle in place. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3. Removing Jack Handle From Jack 2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground.
WHAT TO DO IN EMERGENCIES 393 3. There is a front and rear jacking location on each side of the vehicle. 6 Rear Jacking Location Front Jacking Location 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. Do not raise the vehicle until you are sure the jack is securely engaged.
394 WHAT TO DO IN EMERGENCIES WARNING! CAUTION! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench.
WHAT TO DO IN EMERGENCIES WARNING! • To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. • To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. 7. Lower the vehicle by turning the jack screw to the left. 8. Finish tightening the nuts. Push down on the wrench while at the end of the handle for increased leverage.
396 WHAT TO DO IN EMERGENCIES Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem. Install the lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts.
WHAT TO DO IN EMERGENCIES 397 4. Install the remaining lug nuts with the cone shaped 7. After 25 miles (40 km) check the lug nut torque with a end of the nut toward the wheel. Lightly tighten the lug torque wrench to ensure that all lug nuts are properly nuts. seated against the wheel. WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 5.
398 WHAT TO DO IN EMERGENCIES 4. Finish tightening the lug nuts. Push down on the NOTE: When using a portable battery booster pack wrench while at the end of the handle for increased follow the manufacturer’s operating instructions and leverage. Tighten the lug nuts in a star pattern until each precautions. nut has been tightened twice. The correct tightness of CAUTION! each lug nut is 100 ft/lbs (135 N·m).
WHAT TO DO IN EMERGENCIES shield. To allow jump-starting there are remote battery posts located on the left side of the engine compartment. 399 WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured.
400 WHAT TO DO IN EMERGENCIES 3. Remove the protective cover over the remote positive (+) battery post. To remove the cover, press the locking tab and pull upward on the cover. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure WARNING! Failure to follow this procedure could result in personal injury or property damage due to battery explosion. CAUTION! Locking Tab 4.
WHAT TO DO IN EMERGENCIES 401 1. Connect the positive (+) end of the jumper cable to the 5. Start the engine in the vehicle that has the booster remote positive (+) post of the discharged vehicle. battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery. Once the engine is started, remove the jumper cables in the reverse sequence: 3.
402 WHAT TO DO IN EMERGENCIES 10. Reinstall the protective cover over the remote posi- front wheels. Then shift back and forth between DRIVE tive (+) battery post of the discharged vehicle. and REVERSE. Using minimal accelerator pedal pressure to maintain the rocking motion, without spinning the If frequent jump-starting is required to start your vehicle wheels, is most effective. you should have the battery and charging system inspected at your authorized dealer.
WHAT TO DO IN EMERGENCIES 403 CAUTION! WARNING! • When “rocking” a stuck vehicle by moving between DRIVE and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no transmission shifting occurring). Fast spinning tires can be dangerous.
404 WHAT TO DO IN EMERGENCIES 3. Turn the ignition to the ON/RUN position without 6. Move the shift lever into the NEUTRAL position. starting the engine. 7. The vehicle may then be started in NEUTRAL. 4. Press and maintain firm pressure on the brake pedal. 8. Reinstall the cupholder liner. 5. Insert a screwdriver or similar tool into the hole at the front of the cupholder and push and hold the override lever forward.
WHAT TO DO IN EMERGENCIES Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for the purpose, following equipment manufacturer’s instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to main structural members of the vehicle, not to bumpers or associated brackets. State and local laws applying to vehicles under tow must be observed. If you must use the accessories (wipers, defrosters, etc.
406 WHAT TO DO IN EMERGENCIES If flatbed equipment is not available, and the transmission Without The Ignition Key is operable, the vehicle may be flat towed (with all four Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flatbed towing is wheels on the ground) under the following conditions: the preferred towing method. However, if a flatbed • The shift lever must be in NEUTRAL.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.4L . . . . . . . . . . . . . 409 䡵 Maintenance Procedures . . . . . . . . . . . . . . . . . 414 䡵 Engine Compartment — 3.6L . . . . . . . . . . . . . 410 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 415 䡵 Onboard Diagnostic System — OBD II . . . . . . 411 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 418 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 411 ▫ Engine Air Cleaner Filter . . . . . . . . . .
408 MAINTAINING YOUR VEHICLE ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . 425 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 450 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . 425 ▫ Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . 450 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . 428 ▫ Front Turn Signal . . . . . . . . . . . . . . . . . . . . 452 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 433 ▫ Front Fog Lamp . . . . . .
MAINTAINING YOUR VEHICLE 409 ENGINE COMPARTMENT — 2.
410 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
412 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the “Malfunction Indicator Light (MIL).” Resolving the problem will turn the MIL light off. Normally, the OBD II system will be ready. The OBD II system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacement.
MAINTAINING YOUR VEHICLE 413 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a. The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
414 MAINTAINING YOUR VEHICLE DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
416 MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill cap is replaced and tightened after adding oil.
MAINTAINING YOUR VEHICLE CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty. 417 Lubricants which do not have both the engine oil certification mark and the correct SAE viscosity grade number should not be used. Engine Oil Viscosity (SAE Grade) – 3.6L Engine SAE 5W-30 engine oil is preferred for all operating temperatures.
418 MAINTAINING YOUR VEHICLE Lubricants which do not have both, the engine oil certi- Disposing Of Used Engine Oil And Oil Filters fication mark and the correct SAE viscosity grade num- Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, ber should not be used. indiscriminately discarded, can present a problem to the Synthetic Engine Oils environment.
MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
420 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components. Such damage is not covered by the New Vehicle Limited Warranty.
422 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a air conditioning refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. The A/C Air Filter is located in the fresh air inlet behind the glove box.
MAINTAINING YOUR VEHICLE 423 CAUTION! The A/C Air Filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8. Reinstall the glove box door dampener and glove box. A/C Air Filter Replacement 6. Remove the A/C Air Filter by pulling it straight out of the housing. 7. Install the A/C Air Filter with the arrow on the filter pointing toward the floor.
424 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring.
MAINTAINING YOUR VEHICLE 425 Adding Washer Fluid WARNING! The windshield washer and the rear window washer share the same fluid reservoir. The fluid reservoir is Commercially available windshield washer solvents located in the engine compartment. Be sure to check the are flammable. They could ignite and burn you. Care fluid level in the reservoir at regular intervals. Fill the must be exercised when filling or working around reservoir with windshield washer solvent (not radiator the washer solution.
426 MAINTAINING YOUR VEHICLE into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as required. WARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information.
MAINTAINING YOUR VEHICLE 427 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
428 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE Selection Of Coolant Use only the manufacturer’s recommended coolant. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. CAUTION! • Mixing of engine coolant (antifreeze) other than specified HOAT engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
430 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid Please note that it is the owner’s responsibility to mainOrganic Additive Technology (HOAT) engine coolant tain the proper level of protection against freezing according to the temperatures occurring in the area where (antifreeze). When adding engine coolant (antifreeze): the vehicle is operated.
MAINTAINING YOUR VEHICLE WARNING! 431 rules for your community. To prevent ingestion by animals or children, do not store ethylene glycol based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution.
432 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for engine coolant (antifreeze) freeze point or replacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. 433 WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
434 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Fluid level can be expected to fall as the brake pads wear. Brake fluid level should be checked when pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed.
MAINTAINING YOUR VEHICLE 435 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure. This could result in a collision.
436 MAINTAINING YOUR VEHICLE Selection Of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only the manufacturer’s recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid.
MAINTAINING YOUR VEHICLE 437 driven at least 15 miles (24 km). Hot fluid cannot be held Fluid Level Check – Four-Speed Automatic comfortably between the fingertips. Cold fluid is at a Transmission Use the following procedure to check the automatic temperature below 80° F (27° C). transmission fluid level properly: 7. Wipe the dipstick clean and reinsert until seated. Then, 1. Park the vehicle on level ground. remove dipstick and note the reading. 2.
438 MAINTAINING YOUR VEHICLE CAUTION! • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will require more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. • Dirt and water in the transmission can cause serious damage.
MAINTAINING YOUR VEHICLE 439 road surfaces on which the vehicle is operated, extreme • Atmospheric fallout/industrial pollutants. hot or cold weather and other extreme conditions will Washing have an adverse effect on paint, metal trim, and under• Wash your vehicle regularly. Always wash your vebody protection.
440 MAINTAINING YOUR VEHICLE CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner.
MAINTAINING YOUR VEHICLE 441 Wheel And Wheel Trim Care Cleaning Headlights Your vehicle has plastic headlights that are lighter and • All wheels and wheel trim, especially aluminum and less susceptible to stone breakage than glass headlights. chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed.
442 MAINTAINING YOUR VEHICLE • Blot any remaining stain with a clean, damp towel. use protectants or other products, which may cause undesirable reflections. Use soap and warm water to • For tough stains, apply MOPAR威 Total Clean or restore the low glare surface. equivalent, or a mild soap solution to a clean, damp cloth and remove the stain. Use a fresh, damp towel to Cleaning Interior Trim Interior Trim should be cleaned starting with a damp remove soap residue.
MAINTAINING YOUR VEHICLE 443 and MOPAR威 Total Clean or equivalent. Care should be taken to avoid soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean your leather upholstery. Application of a leather conditioner is not required to maintain the original condition. quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments, which may scratch the elements.
444 MAINTAINING YOUR VEHICLE Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. the liner from the water and dip it back into the water about six times. This will loosen any remaining debris. Rinse the liner thoroughly under warm running water. Shake the excess water from the liner and dry the outer surfaces with a clean soft cloth.
MAINTAINING YOUR VEHICLE Cartridge Fuse Mini Fuse 3 — 10 Amp Red 4 — 5 — 6 — Cavity Integrated Power Module Cavity 1 2 Cartridge Fuse 40 Amp Green — Mini Fuse Description 7 — — Power Top Module – If Equipped 8 — 20 Amp Yellow Brake Vacuum Pump 9 40 Amp Green 10 Amp Red 20 Amp Yellow 10 Amp Red 30 Amp Green 30 Amp Green 445 Description Center High Mounted Stop Light (CHMSL)/Brake Switch Ignition Switch Trailer Tow – If Equipped Power Mirror Switch/Climate Controls Ignition Off D
446 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini Fuse 10 — 20 Amp Yellow 11 — 15 Amp Lt Blue 12 — 13 — 14 — 15 40 Amp Green 16 — — 20 Amp Yellow 10 Amp Red — 15 Amp Lt.
MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse 23 — Mini Fuse 15 Amp Lt. Blue 25 Amp Natural 24 — 25 — 10 Amp Red 26 — 15 Amp Lt.
448 MAINTAINING YOUR VEHICLE Cavity 33 Cartridge Fuse — Mini Fuse 10 Amp Red 34 30 Amp Pink — 35 40 Amp Green — Description Switch Bank/ Diagnostic Link Connector/ Powertrain Control Module (PCM) Anti-Lock Brakes (ABS) Module – If Equipped/Electronic Stability Control (ESC) Module – If Equipped Anti-Lock Brakes (ABS) Module – If Equipped/Electronic Stability Control (ESC) Module – If Equipped Cavity Cartridge Fuse Mini Fuse 36 30 Amp Pink — 37 — 25 Amp Natural Description Passenger Do
MAINTAINING YOUR VEHICLE CAUTION! (Continued) • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected. 449 • Anytime you store your vehicle, or keep it out of service (i.e.
450 MAINTAINING YOUR VEHICLE NOTE: For lighted switches, see your authorized dealer NOTE: It may be necessary to remove the air cleaner for replacement. filter housing and position the totally integrated power module aside prior to replacing the low beam headlamp LIGHT BULBS – Exterior Bulb No. on the driver’s side of the vehicle. Bi-Halogen Headlamp . . . . . . . . . . . . . . . . . . . . HIR2 2. Reach into engine compartment and from behind the Front Turn Signal Lamp. . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 451 3. Rotate bulb and connector one-quarter turn and pull 4. Pull the bulb out of the socket and replace the bulb. outward from assembly. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. 5. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Reinsert the bulb and socket assembly and rotate clockwise one-quarter turn to secure.
452 MAINTAINING YOUR VEHICLE Front Turn Signal 1. Raise and prop open the hood. 1. Rotate the bulb’s electrical connector one-quarter turn counterclockwise and remove it from the fog lamp housing. 2. Rotate the bulb’s electrical connector one-quarter turn 2. Remove the bulb from the connector socket and install counterclockwise and remove it from the headlamp the replacement bulb. housing. 3. Remove the bulb from the connector socket and install the replacement bulb. 4.
MAINTAINING YOUR VEHICLE 453 NOTE: Placing a small flat head screwdriver or similar tool between the lamp outboard ball stud and plastic 1. Open the trunk and gently pull back the trunk liner grommet from inside the trunk can help to disengage the behind the tail lamp (requires removal of a push pin outboard edge of the tail lamp. holding the trunk trim in place near the tail lamp). 3. Grasp the tail lamp by both the outboard and inboard 2.
454 MAINTAINING YOUR VEHICLE NOTE: It is normal to hear a loud sound when the lower 4. Twist and remove socket from lamp. tail lamp area unsnaps from the vehicle mounting 5. Remove bulb from socket and replace. bracket during tail lamp removal. 6. Reinstall the tail lamp, fasteners, and trunk liner. License Plate Lamp 1. Using a small screwdriver, press inward the locking tab on the side of the lamp assembly and pull down on the lamp assembly for removal. 2.
MAINTAINING YOUR VEHICLE 455 FLUID CAPACITIES U.S. Fuel (Approximate) All Engines — (Except 2.4L PZEV) 16.9 Gallons 2.4L PZEV (Partial Zero Emissions Vehicle) 18.5 Gallons Engine Oil with Filter 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 3.6L Engine (SAE 5W-30, API Certified) 6 Quarts Cooling System* 2.4L Engine (MOPAR威 Antifreeze/Coolant 7.7 Quarts 5 Year/100,000 Mile Formula or equivalent) 3.6L Engine (MOPAR威 Antifreeze/Coolant 11.
456 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 2.4L Engine Engine Oil – 3.6L Engine Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade.
MAINTAINING YOUR VEHICLE 457 Chassis Component Automatic Transmission – Four-Speed Automatic Transmission – Six-Speed (62TE) Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not available, then DOT 4 is acceptable.
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 460 ▫ Required Maintenance Intervals . . . . . . . . . .
M A I N T E N A N C E 460 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done S anytime a malfunction is suspected.
MAINTENANCE SCHEDULES NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated.
M A I N T E N A N C E 462 MAINTENANCE SCHEDULES Once A Month • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required. • Check the fluid levels of coolant reservoir, brake master cylinder, and transmission and add as needed. S C H • Check all lights and other electrical items for correct E operation.
MAINTENANCE SCHEDULES 8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 463 M 16,000 Miles (26,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 464 MAINTENANCE SCHEDULES A I 24,000 Miles (39,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 24,000 miles (39 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule 48,000 Miles (78,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center 465 M Date Dealer Code ❏ Change the engine oil and engine oil filter.
M 466 MAINTENANCE SCHEDULES A I 56,000 Miles (91,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 56,000 miles (91 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 72,000 Miles (117,000 km) or 54 Months Maintenance Service Schedule 80,000 Miles (130,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
M 468 MAINTENANCE SCHEDULES A I 88,000 Miles (143,000 km) or N T 66 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 88,000 miles (143 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 104,000 Miles (169,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ Replace the spark plugs (2.4L PZEV Engine Only). ❏ Flush and replace the engine coolant at 104,000 miles (169 000 km) or 60 months whichever comes first.
M 470 MAINTENANCE SCHEDULES A I 120,000 Miles (195,000 km) or N T 90 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 120,000 miles (195 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system. ❏ Change the automatic transmission fluid and filter(s).
MAINTENANCE SCHEDULES 136,000 Miles (221,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 136,000 miles (221 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 471 M 144,000 Miles (234,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 472 MAINTENANCE SCHEDULES A I 152,000 Miles (247,000 km) or N T 114 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 152,000 miles (247 000 km).
MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 479 ▫ Prepare For The Appointment . . . . . . . . . . . 477 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 479 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 477 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
476 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 483 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 483 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 483 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 477 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
478 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 Auburn Hills, MI 48321–8004 solved with this process. Phone: (800) 247–9753 • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center P.O. Box 1621 ship. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
480 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 481 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
482 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC vemaintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. 483 significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
484 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
486 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . 322 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . 324 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 429 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 425 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 363 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 419 Air Conditioner Maintenance . . . . . . . . . .
INDEX 487 Body Mechanism Lubrication . . . . . . . . . . . . . . . 423 Brake Assist System . . . . . . . . . . . . . . . . . . . . . . 327 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . . 324 Fluid Check . . . . . . . . . . . . . . . . . . . . . 433,457 Master Cylinder . . . . . . . . . . . . . . . . . . . . . 433 Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 Warning Light . . . . . . . . . . . . . . . . .
488 INDEX Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . 409,417 Power Steering . . . . . . . . . . . . . . . . . . . . . . 321 Radiator (Coolant Pressure) . . . . . . . . . . . . . 430 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439 Carbon Monoxide Warning . . . . . . . . . . . . . . . 86,364 Cellular Phone . . . . . . . . . . . . . . . . . . . . . . . 100,274 Chains, Tire . . . . . . . . . .
INDEX Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 430 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 428 Adding Coolant (Antifreeze) . . . . . . . . . . . . . 429 Coolant Capacity . . . . . . . . . . . . . . . . . . . . . 455 Coolant Level . . . . . . . . . . . . . . . . . . . . 428,431 Disposal of Used Coolant . . . . . . . . . . . . . . . 431 Drain, Flush, and Refill . . . . . . . . . . . . . . . . 428 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . .
490 INDEX Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409 Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . . 316 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 419 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . 297 Through Flowing, Rising, or Shallow Break-In Recommendations . . . . . . . . . . . . . . 84 Standing Water . . . . . . . . . . . . . . . . . . . . . . 317 Checking Oil Level . . . . . . . . . . . . . . . . . . . 415 E-85 Fuel .
INDEX 491 Filters Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 419 Air Conditioning . . . . . . . . . . . . . . . . . . 286,422 Automatic Transmission . . . . . . . . . . . . . . . . 438 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . 418,456 Engine Oil Disposal . . . . . . . . . . . . . . . . . . . 418 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 Hazard Warning . . . . . . . . . .
492 INDEX Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 455 Fluid Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Fluid Level Checks Automatic Transmission . . . . . . . . . . . . . 437,438 Brake . . . . . . . . . . . . . . . . . . . . . . . . . . 433,457 Cooling System . . . . . . . . . . . . . . . . . . . . . . 428 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 415 Power Steering . . . . . . . . . . . . . . . . . . . 321,457 Fluids . . . . . . . . .
INDEX 493 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . 141 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 Bulb Replacement . . . . . . . . . . . . . . . . . . . . 450 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 441 High Beam . . . . . . . . . . . . . . . . . . . . . . 152,207 High Beam/Low Beam Select Switch . . . . . . 152 On With Wipers . . . . . . . . . . . . . . . . . . . . . 159 Passing . . . . . . . . . . . . . . . . . . . . . . . . . .
494 INDEX Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ignition Key Removal . . . . . . . . . . . . . . . . . . . . . 12 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . . 20 Immobilizer (Sentry Key) . . . . . . . . . . . . . . . . . . . 15 Infant Restraint . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . 360 Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348 Light Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . 89,449 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
496 INDEX Malfunction Indicator Light (Check Engine) . . 205,412 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 481 Map/Reading Lights . . . . . . . . . . . . . . . . . . . . . 155 Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . 433 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Mini-Trip Computer . . . . . . . . . . . . . . . . . . . 207,213 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Automatic Dimming . . . . . . . .
INDEX Occupant Restraints . . . . . . . . . . . . . . . . . . . . . 64,68 Occupant Restraints (Sedan) . . . . . . . . . 40,61,62,64,67 Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . . . 360 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . 198,201 Oil Change Indicator . . . . . . . . . . . . . . . . . . 200,212 Oil Change Indicator, Reset . . . . . . . . . . . . . . 200,212 Oil Filter, Change . . . . . . . . . . . . . .
498 INDEX Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . 274 Radio Remote Controls . . . . . . . . . . . . . . . . . . . . 272 Rear Cupholder . . . . . . . . . . . . . . . . . . . . . . . . . 181 Rear Seat, Folding . . . . . . . . . . . . . . . . . . . . 146,147 Rear Window Defroster . . . . . . . . . . . . . . . . . . . 186 Rear Window Features . . . . . . . . . . . . . . . . . . . . 186 Rearview Mirrors . . . . . . . . . . . . . . . . . . . . . . . . 96 Recorder, Event Data . . . . . .
INDEX 499 Remote Trunk Release . . . . . . . . . . . . . . . . . . . . . 38 Seat Belt Maintenance . . . . . . . . . . . . . . . . . . . . 444 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . . . . 449 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . . . 56 Replacement Keys . . . . . . . . . . . . . . . . . . . . . . . . 16 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Adjustable Shoulder Belt . . . . . . . . . . . . . . . . 49 Replacement Parts . . . . . .
500 INDEX Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Lumbar Support . . . . . . . . . . . . . . . . . . . . . 141 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Rear Folding . . . . . . . . . . . . . . . . . . . . . 146,147 Reclining . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Security Alarm (Theft Alarm) . . . . . . . . . . . . . . . . 18 Selection of Coolant (Antifreeze) . . . . . . . . . . 429,456 Selection of Oil . . . . . . . . . . . . . . . . .
INDEX Steering Wheel Mounted Sound System Controls . . . . . . . . . . . . . . . . . . . . . . . . . 272 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182,449 Storage, Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 285 Stuck, Freeing . . . . . . . . . . . . . . . . . . . . . . . . . . 402 Sun Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 Supplemental Restraint System - Airbag . . . . . . . . 58 Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . .
502 INDEX Quality Grading . . . . . . . . . . . . . . . . . . . . . 483 Radial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Replacement . . . . . . . . . . . . . . . . . . . . . . . . 349 Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . 351 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 332,341 Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . 351 Spare Tire . . . . . . . . . . . . . . .
INDEX Transmitter, Garage Door Opener (HomeLink®) . . 164 Transporting Pets . . . . . . . . . . . . . . . . . . . . . . . . 84 Tread Wear Indicators . . . . . . . . . . . . . . . . . . . . 348 Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Trip Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 198 Trip Odometer Reset Button . . . . . . . . . . . . . . . . 201 Trunk Lid (Deck Lid) . . . . . . . . . . . . . . . . . . . . . . 38 Trunk Release Remote Control . . . . . . . . .
504 INDEX Washer Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . 425 Washers, Windshield . . . . . . . . . . . . . . . . 156,158,425 Washing Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 439 Water Driving Through . . . . . . . . . . . . . . . . . . . . . 317 Wheel and Wheel Trim . . . . . . . . . . . . . . . . . . . . 441 Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 441 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 38,175 Window Fogging . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 12C41-126-AE 5th Edition Printed in U.S.A.
