2011 200 2011 OWNER’S MANUAL Chrysler Group LLC 11C41-126-AA First Edition 200 Printed in U.S.A. 291697.ps 11C41-126-AA Chrysler 1" gutter 09/17/2010 16:27:50 2011 200 2011 OWNER’S MANUAL Chrysler Group LLC 11C41-126-AA First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents.
INTRODUCTION 5
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 䡵 Vehicle Security Alarm — If Equipped . . . . . . . . 18 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ Rearming The System . . . . . . . . . . . . . . . . . . 18 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . 14 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 18 ▫ Locking The Doors With The Key . . . . . . . . . . 14 ▫ To Disarm The System . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Remote Open Window Feature — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 25 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 25 ▫ Programming Additional Transmitters . . . . . . 25 ▫ Transmitter Battery Replacement . . . . . . . . . . 25 ▫ General Information . . . . . . . . . . . . . . . . . . . 26 䡵 Remote Start System — If Equipped . . . . . . . . . 27 ▫ How To Use Remote Start . . . . . . . . . . . . . . . 27 䡵 Door Locks . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Rear Seat Belts . . . . . . . . . . . . . . . . . . . . . . . 49 ▫ Air Bag System Components . . . . . . . . . . . . . 59 ▫ Seat Belts In Passenger Seating Positions . . . . . 49 ▫ Advanced Front Air Bag Features . . . . . . . . . . 60 ▫ Automatic Locking Retractor Mode (ALR) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 49 ▫ Air Bag Deployment Sensors And Controls . . . 64 ▫ Energy Management Feature . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dealer for these numbers and keep them in a safe place. You can insert the double-sided keys into the locks with either side up. Vehicle Key Ignition Key Removal Automatic Transaxle Place the shift lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: • If you try to remove the key before you place the shift lever in PARK, the key may become trapped temporarily in the ignition switch lock cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to warn you that this safety feature is inoperable.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Electronic Vehicle InCAUTION! formation Center (EVIC), the power window switches, radio, hands–free system (if equipped), and power An unlocked car is an invitation to thieves. Always outlets will remain active for up to 10 minutes after the remove key from the ignition and lock all doors ignition switch is turned to the LOCK position. Open- when leaving the vehicle unattended. ing either front door will cancel this feature.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE You can insert the key with either side up. To lock the door, turn the key rearward. To unlock the door, turn the key forward. For door lock lubrication, see “Maintenance Procedures” in “Maintaining Your Vehicle” of this manual. SENTRY KEY姞 The Sentry Key威 Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). The Sentry Key威 Immobilizer system is not compat- The PIN is required for authorized dealer replacement of ible with some after-market remote starting systems. keys. Duplication of keys may be performed at an Use of these systems may result in vehicle starting authorized dealer or by using the Customer Key Programming procedure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key. 17 The new Sentry Key威 is programmed. The Remote Keyless Entry (RKE) transmitter will also be programmed during this procedure. Repeat this procedure to program up to eight keys.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • This device must accept any interference that may be Rearming The System received, including interference that may cause unde- If something triggers the alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn off the sired operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Security Alarm is arming. During this period, if a door is NOTE: opened, the ignition switch is turned to ON/RUN, or the • The driver’s door key cylinder and the trunk button on the RKE transmitter cannot arm or disarm the Vehicle power door locks are unlocked in any manner, the Security Alarm. Vehicle Security Alarm will automatically disarm.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Vehicle Security Alarm is armed and the battery becomes disconnected the Vehicle Security Alarm will remain armed when the battery is reconnected. The exterior lights will flash, and the horn will sound. If this occurs, disarm the Vehicle Security Alarm. The interior lights will fade to off after approximately 30 seconds or they will immediately fade to off once the ignition switch is turned to ON/RUN from the OFF position..
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 NOTE: To Unlock The Doors • The line of transmission must not be blocked with Press and release the UNLOCK button on the RKE metal objects. transmitter once to unlock the driver’s door, or twice to unlock all doors. The turn signal lights will flash to • Inserting the key into the ignition switch disables all acknowledge the unlock signal. The Illuminated Entry buttons on the RKE transmitter. system (if equipped) will also turn on.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: If there is no key in the ignition switch, pressing following procedure: the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle Security Alarm 1. Press and hold the LOCK button on a programmed system. Opening a door with the system activated will RKE transmitter for at least four seconds, but not longer cause the alarm to sound.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the NOTE: If there is no key in the ignition switch, pressing following procedure: the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle Security Alarm 1. Press and hold the UNLOCK button on a programmed system. Opening a door with the system activated will RKE transmitter for at least four seconds, but not longer cause the alarm to sound.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn With Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. This feature can be turned on or off. To change the current setting, proceed as follows: 3. Test the feature while outside of the vehicle by pressing the LOCK button on the RKE transmitter with the ignition in the LOCK position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 The Panic Alarm will stay on for three minutes unless Remote Open Window Feature — If Equipped The RKE remotely lowers both driver and passenger you turn it off by pressing the PANIC button a second front windows simultaneously. Lowering the front win- time or if the vehicle speed is 5 mph (8 km/h) or greater.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. With the RKE transmitter buttons facing down, use a flat blade screwdriver to pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal. 2. Remove and replace the battery. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 3. To assemble the RKE transmitter case, snap the two halves together.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If your RKE transmitter fails to operate from a normal How To Use Remote Start All of the following conditions must be met before the distance, check for these two conditions. engine will remote start: 1. Weak battery in the RKE transmitter. The expected life • Shift lever in PARK of a battery is five years. 2.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless. Carbon Monoxide is poisonous and can cause serious injury or death when inhaled. • Keep Remote Keyless Entry (RKE) transmitters away from children. Operation of the Remote Start System, windows, door locks or other controls could cause serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • For security, power window operation is disabled To Exit Remote Start Mode Without Driving The when the vehicle is in the Remote Start mode. Vehicle Press and release the REMOTE START button one time or • The engine can be started two consecutive times (two allow the engine to run for the entire 15 minute cycle. 15 minute cycles) with the RKE transmitter.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks To lock each door, push the door lock knob on each door trim panel downward. To unlock each door, pull the inside door handle. Manual Lock Knob • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key from the ignition lock, and lock your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. 2 Power Door Locks A door lock switch is located on the driver and passenger door panel. Press this switch to lock or unlock the doors. Power Door Lock Switch Automatic Door Locks — If Equipped When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Unlock On Exit Auto Unlock On Exit Programming The doors will unlock automatically on vehicles with The Automatic Unlock Doors On Exit feature can be power door locks if: enabled or disabled as follows: 1. The Automatic Unlock Doors On Exit feature is en- • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to “Electronic Vehicle abled. Information Center (EVIC)/Personal Settings (Cus2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. 2 NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws. Child-Protection Door Lock System — Rear Doors To provide a safer environment for children riding in the rear seat, the rear doors of your vehicle have a ChildProtection Door Lock system.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Child-Protection Door Locks are located inside the rear edge of the door. Insert the tip of the ignition key or similar flat-bladed object into the lock and rotate approximately one-quarter turn to the lock or unlock position (as indicated by the stamped icons). WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. Auto Window Down — If Equipped The front window controls on the driver and passenger door trim panels have an Auto-Down feature.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To cancel the Auto-Down movement, operate the switch Auto Window Up — If Equipped either in the up or down direction and release the switch. Lift the window switch fully upward to the second detent, release, and the window will go up automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! When the window is almost closed, there is no anti-pinch protection. To avoid personal injury, be sure to clear your arms, hands, fingers and all objects from the window path before closing. Reset Auto Up Anytime the vehicle battery goes dead, the Auto Up function will be disabled.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, then open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, then adjust the sunroof opening to minimize the buffeting. To unlatch the trunk lid from outside the vehicle, press and release the TRUNK button on the RKE transmitter two times.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 TRUNK SAFETY WARNING WARNING! 2 Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in the trunk, children can die from suffocation or heat stroke.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Advanced Front Air Bags for driver and front passen- • All seat belt systems (except the driver’s) include ger Automatic Locking Retractors (ALRs), which lock the seat belt webbing into position by extending the belt • Supplemental Active Head Restraints (AHR) located all the way out and then adjusting the belt to the on top of the front seats (integrated into the head desired length to restrain a child seat or secure a large restraint) — if equipped item i
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 NOTE: The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on the severity and type of collision. secured in the rear seat in child restraints or beltpositioning booster seats. Older children who do not use child restraints or belt-positioning booster seats should ride properly buckled up in the rear seat.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between you and the door. 5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under ⴖIf You Need Assistanceⴖ. WARNING! • Relying on the air bags alone could lead to more severe injuries in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Buckle up even though you are an excellent driver, even conditions. However, in an accident the belt will lock and on short trips. Someone on the road may be a poor driver reduce your risk of striking the inside of the vehicle or and cause an accident that includes you. This can happen being thrown out. far away from home or on your own street. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in an accident.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Wearing your belt in the wrong place could make your injuries in an accident much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too. • Two people should never be belted into a single seat belt. People belted together can crash into one another in an accident, hurting one another badly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in an accident, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during an accident.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in an accident. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt will not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Rear Seat Belts The shoulder belt anchorages of the rear three-point belts are nonadjustable for outboard and center rear passengers on sedans. The center belt is mounted to the rear shelf panel and exits through a bezel in the panel.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE anytime a child safety seat is installed in a seating position that has a belt with this feature. Children 12 years old and under should always be properly restrained in the rear seat. How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of an accident. These devices may improve the performance of the seat belt by assuring that the belt is tight about the occupant early in an accident. Pretensioners work for all size occupants, including those in child restraints.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! 53 1. Grasp the deployed AHR from the rear seat. All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 3 — Final Downward Movement To Engage Locking Mechanism 1 — Downward Movement 2 — Rearward Movement 4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Enhanced Seat Belt Use Reminder System (BeltAlert姞) BeltAlert威 is a feature intended to remind the driver to fasten their seat belt. This feature is active whenever the ignition is on. If the driver is unbelted, the Seat Belt Reminder Light will turn on and remain on until the driver seat belt is fastened. BeltAlert威 triggers within 60 seconds of vehicle speed over 5 mph (8 km/h).
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE BeltAlert威 will be reactivated if the driver’s seat belt is 2. Turn the ignition switch to the ON/RUN position and unbuckled for more than 10 seconds and the vehicle wait for the Seat Belt Reminder Light to turn off. speed is greater than 5 mph (8 km/h). 3. Unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds, ending with the seat BeltAlert姞 Programming belt buckled.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 NOTE: Although BeltAlert威 has been deactivated, the extender should be used only if the existing belt is not Seat Belt Reminder Light will continue to illuminate long enough. When it is not required, remove the extender, and store it. while the driver’s seat belt remains unbuckled. Seat Belts And Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE instrument panel, above the glove compartment. The The Advanced Front Air Bags have a multistage inflator words SRS AIRBAG are embossed on the air bag covers. design. This allows the air bag to have different rates of inflation that are based on the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 vehicle is equipped with SABIC, they are located above • Air Bag Warning Light the side windows. The trim covering the side air bags is • Steering Wheel and Column labeled SRS AIRBAG. • Instrument Panel This vehicle is equipped with Supplemental SeatMounted Side Air Bags (SAB) to provide enhanced • Knee Impact Bolster protection for an occupant during a side impact. The • Driver Advanced Front Air Bag SABs are located in the outboard side of the front seats.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags. This system provides output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), which may receive information from the front impact sensors. The first stage inflator is triggered immediately during an impact that requires air bag deployment.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Seat-Mounted Side Air Bags (SAB) Supplemental Seat-Mounted Side Air Bags may provide enhanced protection to help protect an occupant during a side impact. The Supplemental Seat-Mounted Side Air Bag is marked with an air bag label sewn into the outboard side of the front seats. Supplemental Seat-Mounted Side Air Bag Label 61 When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each air bag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for sideimpact head injuries. The SABIC air bags deploy downward, covering both windows on the impact side.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system includes side impact sensors that are calibrated to deploy the side air bags during impacts that require air bag occupant protection. WARNING! • If your vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front Air Bags work with the knee bolsters to provide improved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection. Air Bag Deployment Sensors And Controls Advanced Front Air Bags are designed to provide additional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Also, the ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Air Bag Warning Light will turn off.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating SAB exits through the seat seam into the space between the occupant and the door. The SAB fully inflate in about 10 milliseconds.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System In the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether to have the Enhanced Accident Response System perform the following functions: • • • • NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 bag inflation. These airborne particles may irritate the Maintaining Your Air Bag System skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation • Modifications to any part of the air bag system continues, see your doctor. If these particles settle on could cause it to fail when you need it.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat including your trim cover and cushion needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. WARNING! In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Small Children 73 WARNING! • Safety experts recommend that children ride Rearward-facing child seats must never be used in rearward-facing in the vehicle until they are at least the front seat of a vehicle with a front passenger air one year old and weigh at least 20 lbs (9 kg). Two types bag. An air bag deployment could cause severe of child restraints can be used rearward-facing: infant injury or death to infants in this position.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the vehicle’s seat belts properly. If the child cannot sit Here are some tips on getting the most out of your with knees bent over the vehicle’s cushion while the child restraints: child’s back is against the seatback, then the child should • Children who are large enough to wear the shoulder use a belt-positioning booster seat. The child and booster belt comfortably, and whose legs are long enough to seat are held in the vehicle by the lap/shoulder belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Carefully follow the instructions that come with the restraint. If you install the restraint improperly, it may not work when you need it. 75 around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secure, try a different seating position. • All passenger seating positions contain automatic • Buckle the child into the seat according to the child locking retractors.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors and Tether for CHildren (LATCH) Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tether for CHildren. The LATCH system provides for the installation of the child restraint without using the vehicle seat belt. All rear seating positions have lower anchorages that are capable of accommodating LATCH-compatible child seats having flexible, webbingmounted lower attachments.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 have tether straps, and you are urged to take advantage of all of the available attachments provided with your child restraint in any vehicle. Rear Seat LATCH Anchors Because the lower anchorages are to be introduced to passenger carrying vehicles over a period of years, child restraint systems having attachments for those anchorages will continue to have features for installation in vehicles using the lap or lap/shoulder belt.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In addition, there are tether strap anchorages Installing The LATCH-Compatible Child Restraint behind each rear seating position located in the System We urge you to carefully follow the directions of the panel between the rear seatback and the rear manufacturer when installing your child restraint. Not all window. These tether strap anchorages are child restraint systems will be installed as described here. under a plastic cover with this symbol on it.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE of the seat cover material. Then, rotate the tether anchorage cover directly behind the seat where you are placing the child restraint and attach the tether strap to the anchorage, being careful to route the tether strap to provide the most direct path between the anchor and the child restraint.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If 1. Rotate the cover over the anchor directly behind the your vehicle is equipped with adjustable rear head seat where you are placing the child restraint. restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Installing Child Restraints Using The Vehicle Seat Belts The seat belts in the passenger seating positions are equipped with an Automatic Locking Retractor to secure a Child Restraint System (CRS).
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE retracts, you will hear a ratcheting sound. This indicates insert the latch plate into the buckle again. If you still can’t make the child restraint secure, try a different the safety belt is now in the Automatic Locking mode. seating position. 2. Finally, pull on any excess webbing to tighten the lap portion around the child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. 83 While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS Exhaust Gas Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 If you are required to drive with the trunk/liftgate open, Safety Checks You Should Make Inside The make sure that all windows are closed and the climate Vehicle control BLOWER switch is set at high speed. DO NOT Seat Belts use the recirculation mode. Inspect the belt system periodically, checking for cuts, The best protection against carbon monoxide entry into frays, and loose parts.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly installed, if not equipped from the factory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 䡵 Uconnect™ Phone — If Equipped . . . . . . . . . . . 97 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 93 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 99 ▫ Automatic Dimming Mirror — If Equipped . . . 94 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . 107 ▫ Power Mirrors . . . . . . . . . . . . . . . . . . . . . . .
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Voice Command — If Equipped . . . . . . . . . . . 127 ▫ Fold-Flat Passenger Seatback . . . . . . . . . . . . 142 ▫ Voice Command System Operation . . . . . . . . 127 ▫ Folding Rear Seat . . . . . . . . . . . . . . . . . . . . 143 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 128 ▫ Folding Rear Seat Center Armrest . . . . . . . . 144 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . 132 䡵 To Open And Close The Hood . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 ▫ Fog Lights — If Equipped . . . . . . . . . . . . . . 150 ▫ To Set A Desired Speed . . . . . . . . . . . . . . . . 159 ▫ Daytime Running Lights — If Equipped . . . . 150 ▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . 159 ▫ Lights On Reminder . . . . . . . . . . . . . . . . . . 150 ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . 159 ▫ Instrument Panel Dimmer . . . . . . . . . . . . . . 151 ▫ To Vary The Speed Setting . . . . . .
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Power Sunroof — If Equipped . . . . . . . . . . . . 167 䡵 Cigar Lighter And Ash Receiver — If Equipped . . . . . . . . . . . . . . . . . ▫ Opening Sunroof — Express . . . . . . . . . . . . 168 䡵 Cupholders . . . . . . . . . . . . . . . . . ▫ Opening Sunroof — Manual Mode . . . . . . . . 168 ▫ Front Seat Cupholders . . . . . . . . ▫ Closing Sunroof — Express . . . . . . . . . . . . . 168 ▫ Rear Cupholders . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. 3 Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Power Mirrors The power mirror controls are located on the driver’s door trim panel. 3 Mirror Directions Power Mirror Switch To adjust a mirror, turn the control wand toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. When you are finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting Sideview Mirrors Exterior Mirrors Folding Feature All exterior mirrors are hinged and may be moved either Outside Mirror — Driver Side forward or rearward to resist damage. The hinges have Adjust the outside mirror to center on the adjacent lane of three detent positions: full forward, full rearward and traffic, with a slight overlap of the view obtained on the normal. inside mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect™ Phone. NOTE: The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth威 “Hands-Free Profile”, Version 0.96 or higher. See the Uconnect™ website for supported phones. For Uconnect™ customer support, visit the following websites: • www.chrysler.com/uconnect Illuminated Vanity Mirror • www.dodge.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect™ Phone is driven through your Bluetooth威 “Hands-Free Profile” mobile phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Voice Command Button Actual button location may vary with the radio. The individual buttons are described in the “Operation” section. Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice command “Phonebook New Entry”, or you can break the compound form command into two voice commands: “Phonebook” and “New Entry”. Please remember, the Uconnect™ Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, after the beep, say “Pair a Device” and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. 101 phone to use if multiple mobile phones are in the vehicle at the same time.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios. may appear in the display of certain radios. Call By Saying A Name Add Names To Your Uconnect™ Phonebook • Press the NOTE: Adding names to the Uconnect™ Phonebook is recommended when the vehicle is not in motion. button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • When prompted, enter the number designation (e.g., “Home”, “Work”, “Mobile”, or “Other”). This will allow you to store multiple numbers for each phonebook entry, if desired. Phonebook Download – Automatic Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect™ Phone automatically downloads names (text names) and number entries from your mobile phone’s • When prompted, recite the phone number for the phonebook.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Edit Uconnect™ Phonebook Entries loaded, there may be a short delay before the latest NOTE: downloaded names can be used. Until then, if avail• Editing names in the phonebook is recommended able, the previously downloaded phonebook is availwhen the vehicle is not in motion. able for use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 After you are finished editing an entry in the phonebook, • After you enter the Phonebook Delete menu, you will you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete. You can either say the name of a phonebook to the main menu.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete/Erase “All” Uconnect™ Phonebook Entries List All Names In The Uconnect™ Phonebook • Press the • Press the button to begin. button to begin. • After the “Ready” prompt and the following beep, say • After the “Ready” prompt and the following beep, say “Phonebook Erase All”. “Phonebook List Names”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phone Call Features The following features can be accessed through the Uconnect™ Phone if the feature(s) are available on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Uconnect™ Phone. Check with your mobile service provider for the features that you have.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Making A Second Call While Current Call Is In Progress To make a second call while you are currently on a call, press the button and say “Dial” or “Call” followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer to “Conference Call” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Termination To end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is cell phone-dependent. To bring the call back from hold, press button until you hear a single beep. and hold the Redial • Press the button to begin.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone Features Emergency Assistance If you are in an emergency and the mobile phone is reachable: Language Selection To change the language that the Uconnect™ Phone is using: • Pick up the phone and manually dial the emergency number for your area. • Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Canada and 060 for Mexico). The number dialed may Towing Assistance not be applicable with the available mobile service and If you need towing assistance: area. • Press the button to begin. • If supported, this number may be programmable on • After the “Ready” prompt and the following beep, say button and some systems. To do this, press the “Towing Assistance”. say “Setup”, followed by “Emergency”.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When calling a number with your Uconnect™ Phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can press the button and say the sequence you wish to enter, followed by the word “Send”. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can Voice Mail Calling button and say, “3 7 4 6 # Send”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 The Uconnect™ Phone will then send the corresponding Turning Confirmation Prompts ON/OFF phone number associated with the phonebook entry, as Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ tones over the phone. Phone will not repeat a phone number before you dial it). NOTE: • You may not hear all of the tones due to mobile phone • Press the button to begin. network configurations. This is normal.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using The Mobile Phone Keypad You can dial a phone number with your mobile phone keypad and still use the Uconnect™ Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth威 mobile phone, the audio will be played through your vehicle’s audio system. The Uconnect™ Phone will work the same as if you dial the number using Voice Command.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 from your Uconnect™ Phone paired mobile phone to the • When prompted, say “List Phones”. button Uconnect™ Phone or vice versa, press the • The Uconnect™ Phone will play the phone names of and say “Transfer Call”. all paired mobile phones in order from the highest to the lowest priority.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone call. If the selected phone is not available, the Uconnect™ Phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Things You Should Know About Your Uconnect™ Phone Uconnect™ Phone Tutorial To hear a brief tutorial of the system features, press the button and say “Uconnect™ Tutorial.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 You can either press the Uconnect™ Phone button to Voice Command restore the factory setting or repeat the words and • For best performance, adjust the rearview mirror to phrases when prompted by the Uconnect™ Phone. For provide at least 1⁄2 in (1 cm) gap between the overhead best results, the Voice Training session should be comconsole (if equipped) and the mirror.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, • dry weather condition. • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • You can say “O” (letter “O”) for “0” (zero). • Even though the system is designed for users speaking in North American English, French, and Spanish ac- • Even though international dialing for most number combinations is supported, some shortcut dialing cents, the system may not always work for some.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. 119 SMS Uconnect™ Phone can read or send new messages on your phone. Read Messages: • Performance, such as audio clarity, echo, and loudness If you receive a new text message while your phone is to a large degree rely on the phone and network, and connected to Uconnect™ Phone, an announcement will not the Uconnect™ Phone.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Where are you? Send Messages: You can send messages using Uconnect™ Phone. To send 4. I need more direction. a new message: 5. L O L • Press the button. 6. Why • After the “Ready” prompt and the following beep, say 7. I love you “SMS Send” or “Send Message.” • You can either say the message you wish to send or say 8. Call me “List Messages.” There are 20 preset messages. 9. Call me later button while the 10.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming messages. • Press the button. • After the “Ready” prompt and the following beep, say “Setup, SMS Incoming Message Announcement,” you will then be given a choice to change it.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 3
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) 125 Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 3
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no other pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winbutton, listen dows are closed, and the heater/air conditioning fan is options, press the Voice Command set to low. for the beep, and say your command. button while the Pressing the Voice Command system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 2. Say a command (e.g., “Help”). Radio AM To switch to the AM band, say “AM” or “Radio AM”. In 3. Use the ON/OFF VOLUME rotary knob to adjust the this mode, you may say the following commands: volume to a comfortable level while the Voice Command system is speaking. Please note the volume setting for • “Frequency #” (to change the frequency) Voice Command is different than the audio system.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Disc To switch to the disc mode, say “Disc”. In this mode, you may say the following commands: Satellite Radio • “Track” (#) (to change the track) To switch to satellite radio mode, say “Sat” or “Satellite Radio”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE − “Continue” (to continue recording) • “Switch to system setup” − “Delete” (to delete the recording) • “Change to setup” 131 • “Play Memos” (to play previously recorded memos) • “Main menu setup” or — During the playback you may press the Voice • “Switch to setup” button to stop playing memos.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the rear of the seat switch, the seat will move in the direction of the switch. Release the switch when the desired position is reached. Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select HIGH-level heating. Press the switch a second time to select LOW-level heating. Press the switch a third time to shut the heating elements OFF. NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. When the HIGH-level setting is selected, the heater will provide a boosted heat level during the first four minutes of operation. Then, the heat output will drop to the normal HIGH-level.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull the bar upward to move the seat forward or rearManual Front Seat Adjustment The manual seat adjustment bar is at the front of the seat, ward. Release the bar once the seat is in the position near the floor. desired. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched. WARNING! Adjusting a seat while the vehicle is moving is dangerous.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 3 Manual Seat Height Adjustment Lever Reclining Seats The recliner control is located on the side of the seat. To recline, lean forward slightly before lifting the lever, then lean back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision. 139 identified by any markings, only through visual inspection of the head restraint.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint. For comfort the Active Head Restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Active Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Restraint during sudden stops. Failure to follow this warning could cause personal injury if the Active Head Restraint is deployed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 The hard seatback features a work surface and a molded When returning the rear seatback to the upright position, be sure the seatback is latched. rim for retaining items stored on the seatback panel. 3 Fold-Flat Front Passenger Seat Folding Rear Seat To provide additional storage area, the rear seatback can be folded forward. Pull on the loops shown in the picture to fold down either or both seatbacks.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The rear cargo area of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children. They could be seriously injured in a collision. Children should be seated and using the proper restraint system. Folding Rear Seat Center Armrest The rear seat is equipped with a folding armrest with cupholders.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. 145 2. Then lift the secondary latch located under the front edge of the hood, near the center and raise the hood. 1. Pull the hood release lever located under the left side of the instrument panel.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the left underside of the hood. CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. WARNING! Be sure the hood is fully latched before driving your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 passing light, fog lights, instrument panel light dimming Headlights And Parking Lights and turn signals. The multifunction lever is located on Turn the end of the multifunction lever to the first detent for parking light operation. Turn to the second detent for the left side of the steering column. headlight operation.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE With the engine running and the multifunction lever in Automatic Headlights — If Equipped Turning the end of the multifunction lever to the third the AUTO position, the headlights will turn on and turn detent (AUTO), will activate the automatic headlight off based on the surrounding light levels. system. Headlight Time Delay There is also a feature that delays turning off the vehicle lights for 30, 60 or 90 seconds after the ignition switch is turned OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam. Pull the lever toward you, to switch the headlights back to low beam.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights — If Equipped The front fog light switch is on the multifunction lever. To activate the front fog lights, turn on the parking lights or the low beam headlights and pull out the end of the multifunction lever. NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the front fog lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. 3 Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the parking lights or headlights are on.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle. They will not turn off automatically. Interior lighting also comes on when a door is opened or the dimmer control is turned fully upward, past the second detent. There is a second light located midway back in the headliner.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 3 Windshield Wiper/Washer Lever Changing Wiper Speeds Rotate the end of the lever to the LO position for NOTE: The wipers will automatically return to the park low-speed wiper operation, or to the HI position for position if you turn the ignition switch OFF while they high-speed wiper operation. are operating. The wipers will resume operation when you turn the ignition switch to the ON position again.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 NOTE: The wiper delay times depend on vehicle speed. If you activate the washer while the wiper control is in If the vehicle is moving less than 10 mph (16 km/h), the off position, the wipers will operate for two wipe cycles and then turn off. delay times will be doubled. Windshield Washers To use the washer, pull the windshield wiper/washer control lever toward you and hold it for as long as washer spray is desired.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature Push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 located below the steering wheel at the end of the outward or push it inward as desired. To lock the steering steering column. column in position, pull the lever upward until fully engaged. WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your vehicle.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Electronic Speed Control buttons are located on the the same time. If this occurs, the Electronic Speed Control right side of the steering wheel. System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. To Activate Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Set A Desired Speed Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed. 159 To Vary The Speed Setting When the Electronic Speed Control is set, you can increase speed by pushing the RES (+) button.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Accelerate For Passing Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Using Electronic Speed Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 WARNING! HomeLink威 Buttons NOTE: HomeLink威 is disabled when the Vehicle Security Alarm is active. • Your motorized door or gate will open and close while you are training the universal transceiver. Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink姞 Place the handheld transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink威 button you wish to program while keeping the indicator light in view. Before You Begin If you have not trained any of the HomeLink威 buttons, erase all channels before you begin training. 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After training a HomeLink威 channel, if the garage door does not operate with HomeLink威 and the garage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to Step 5 “Programming A Rolling Code System.” This can usually be found where the hanging antenna wire is attached to the garage door opener motor. It is NOT the button normally used to open and close the door. 3 4.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Firmly press and release the LEARN or TRAINING Gate Operator/Canadian Programming button. The name and color of the button may vary by Canadian radio frequency laws require transmitter signals to time-out (or quit) after several seconds of transmanufacturer. mission – which may not be long enough for HomeLink威 NOTE: You have 30 seconds in which to initiate the next to pick up the signal during programming.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 If you unplugged the device for training, plug it back in 2. Press and hold the desired HomeLink威 button until the indicator light begins to flash after 20 seconds. Do not at this time. release the button. Then proceed with Step 4 under “Programming 3. Without releasing the button, proceed with ProgramHomeLink威,” earlier in this section. ming HomeLink威 Step 2 and follow all remaining steps.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Troubleshooting Tips General Information If you are having trouble programming HomeLink威, here This device complies with FCC rules Part 15 and Industry are some of the most common solutions: Canada RSS-210. Operation is subject to the following two conditions: • Replace the battery in the original transmitter. 1. This device may not cause harmful interference. • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The sunroof controls are mounted between the dome/ reading lights. Power Sunroof Switch 167 WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express Press the switch rearward and release it within one-half second and the sunroof will open automatically from any position. The sunroof will open fully and stop automatically. This is called “Express Open”. During Express Open operation, any movement of the sunroof switch will stop the sunroof. position. The sunroof will close fully and stop automatically. This is called “Express Close”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: Pinch protection is disabled while the switch is Wind Buffeting Wind buffeting can be described as the perception of pressed. pressure on the ears or a helicopter-type sound in the Venting Sunroof — Express ears. Your vehicle may exhibit wind buffeting with the Press and release the Vent button within one half second windows down, or the sunroof (if so equipped) is in and the sunroof will open to the vent position.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ignition Off Operation For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power sunroof switch will remain active for 45 seconds after the ignition switch is turned OFF. Opening either front door will cancel this feature. ELECTRICAL POWER OUTLETS There are two 12 Volt (13 Amp) electrical power outlets on this vehicle. Both of the power outlets are protected by a fuse.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 3 Instrument Panel Power Outlet Center Console There is a power outlet located on the inside of the center NOTE: To ensure proper operation a MOPAR威 knob console. This power outlet is powered directly from the and element must be used. battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your warranty.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 WARNING! CAUTION! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED An optional ash receiver is available from your authorized dealer and will fit in the center console front cupholder. The optional ash receiver also comes with a cigar lighter that can be used with the power outlets. Refer to “Power Outlets” in “Understanding the Features of Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 3 Rear Cupholders Rear Seat Bottle Holder There are built-in bottle holders located in both rear door trim panels. Rear Bottle Holder WARNING! If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE CONSOLE FEATURES The center console is located between the front driver Glovebox Storage Compartment and passenger seats. The center console armrest slides The glovebox storage compartment is located on the right forward from design position to provide added user side of the instrument panel. To open the glovebox, pull comfort.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 3 Center Console Storage Console Detail Dual Storage Bins 1 — Release Top Compartment The center console contains both an upper and lower 2 — Release Bottom Compartment storage bin. Lifting a latch at the front of the hinged The lower bin can be accessed directly, without first armrest provides access to these storage areas. exposing the upper bin, by operating the right latch with the armrest down. The first storage bin can be used to hold smaller items.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The lower storage bin includes a molded-in coin holder, room for CD’s, DVD’s, and a power outlet that allows a cellular phone to recharge while concealed. NOTE: • A notch in the side of the console base under the armrest will also allow use of cellular phone while still plugged into the power outlet and with the armrest latched down. WARNING! Do not operate this vehicle with a console compartment lid in the open position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 WARNING! WARNING! (Continued) • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous projectile in a sudden stop or collision. Ski Pass-Through There is a ski pass-through door located behind the rear seat armrest that allows longer items, such as snow skis, to be stored in the rear cargo area. Lower the armrest and pull downward on the latch to open the ski pass-through door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 10 minutes. For an additional five minutes of operation, press the button a second time.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 186 ▫ Oil Change Required — If Equipped . . . . . . 206 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 187 ▫ Trip Functions . . . . . . . . . . . . . . . . . . . . . . 207 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 188 ▫ Display Units In . . . . . . . . . . . . . . . . . . . . . 208 䡵 Mini-Trip Computer — If Equipped . . . . . . . . 201 ▫ Tire Psi . . . . . . . . . . . .
184 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Media Center 230 (REQ) — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . 215 䡵 Media Center 730N/430/430N (RHR/RER/ RBZ/RHB) CD/DVD/HDD/NAV — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 234 ▫ Operating Instructions - Radio Mode . . . . . . 216 ▫ Operating Instructions (Voice Command System) — If Equipped . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Media Center 130 With Satellite Radio (Sales Code RES+RSC). . . . . . . . . . . . . . . . . . . 243 ▫ Operating Instructions — Radio Mode . . . . . 244 ▫ Operation Instructions — CD Mode For CD And MP3 Audio Play . . . . . . . . . . . . . . . . . 249 ▫ Notes On Playing MP3 Files . . . . . . . . . . . . 251 ▫ List Button (CD Mode For MP3 Play) . . . . . . 254 ▫ Info Button (CD Mode For MP3 Play) . . . . . . 254 ▫ Uconnect™ Multimedia (Satellite Radio) — If Equipped . .
186 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 5 — Air Outlet — Side Window Demister Outlet — Instrument Cluster — Ignition Switch — Analog Clock 6 — Radio 7 — Passenger Airbag 8 — Glove Compartment 9 — Heated Seat Switch – If Equipped 10 — Hazard Switch 11 — Storage Compartment 12 — Climate Control 13 — Trunk Release Button 14 — Power Outlet
UNDERSTANDING YOUR INSTRUMENT PANEL 187 INSTRUMENT CLUSTER 4
188 UNDERSTANDING YOUR INSTRUMENT PANEL removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant temperaas a supplement to the radiator and aids in removing heat ture. Any reading below the red area of the gauge shows from the engine cooling system. that the engine cooling system is operating properly.
UNDERSTANDING YOUR INSTRUMENT PANEL 189 If jump starting is required, refer to “Jump Starting 5. Low Fuel Light When the fuel level drops to approximately 2.0 gal- Procedures” in “What To Do In Emergencies”. lons (7.6 Liters), the fuel symbol will light and a 7. Airbag Warning Light single chime will sound. This light will turn on for four to eight seconds NOTE: This light will remain on until a minimum of as a bulb check when the ignition switch is first turned to ON/RUN.
190 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to “Occupant 10. Engine Temperature Warning Light Restraints” in “Things To Know Before Starting Your This light warns of an overheated engine condition. If the engine is critically hot, a warning chime Vehicle” for further information. will sound 10 times. After the chime turns off, the 9. Oil Pressure Warning Light engine will still be critically hot until the light goes out. This light indicates low engine oil pressure.
UNDERSTANDING YOUR INSTRUMENT PANEL 191 The light will remain on until the cause is corrected. In the event of an EBD failure, the Brake Warning Light will turn on along with the ABS Light. Immediate repair NOTE: The light may flash momentarily during sharp to the ABS system is required. cornering maneuvers which change fluid level conditions. The vehicle should have service performed, and The operation of the Brake Warning Light can be checked the brake fluid level checked.
192 UNDERSTANDING YOUR INSTRUMENT PANEL been driven. If your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a 13.
UNDERSTANDING YOUR INSTRUMENT PANEL 193 Vehicle Odometer Messages LoW tirE When the appropriate conditions exist, the odometer will When the appropriate condition exists, the odometer display the following messages: display will toggle between LoW and tirE for three cycles. door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Door Ajar HOTOIL dECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trunk Ajar When this message is displayed there is a transmission LoW tirE. . . . . . . . . .
194 UNDERSTANDING YOUR INSTRUMENT PANEL tighten the fuel filler cap properly and press the odometer reset button to turn off the “gASCAP” message. (Refer to “Onboard Diagnostic System — OBDII” in “Maintaining Your Vehicle” for further information). If the problem continues, the message will appear the next time the vehicle is started. See your authorized dealer service center as soon as possible. To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 17. Electronic Throttle Control (ETC) Indicator Light 15. Cruise Indicator — If Equipped This indicator shows that the Electronic Speed This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a Control System is ON. problem is detected, the light will come on 16. Odometer/Trip Odometer Reset Button while the engine is running.
196 UNDERSTANDING YOUR INSTRUMENT PANEL 22. Vehicle Security Light — If Equipped 18. Park/Headlight ON Indicator — If Equipped This indicator will illuminate when the park This light will flash rapidly for approximately 16 seconds when the alarm system is arming. lights or headlights are turned on. The light will begin to flash slowly indicating that the system is armed. The light will stop flashing when the vehicle is disarmed. 19. Electronic Stability Control (ESC) OFF Indicator Light — If Equipped 23.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 If the ABS light is on, the brake system should be serviced cycles, and the vehicle has been driven several miles as soon as possible to restore the benefit of Anti-Lock (kilometers) at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the Brakes. problem diagnosed and corrected. The ABS warning light should be checked frequently to assure that it is operating properly.
198 UNDERSTANDING YOUR INSTRUMENT PANEL 25. Tire Pressure Monitoring Telltale Light Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.
UNDERSTANDING YOUR INSTRUMENT PANEL 199 alternate tires or wheels on the vehicle that prevent the 26. Malfunction Indicator Light (MIL) TPMS from functioning properly.
200 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Prolonged driving with the MIL on could cause damage to the engine control system. It also could affect fuel economy and drivability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! If the Transmission Temperature Warning Light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. 201 MINI-TRIP COMPUTER — IF EQUIPPED The Mini-Trip Computer is located in the instrument cluster and features a driver-interactive trip information and temperature display.
202 UNDERSTANDING YOUR INSTRUMENT PANEL Control Buttons RESET Button To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel. The following displays can be reset or changed: • Trip A • Trip B Trip Odometer (ODO) This display shows the distance traveled since the last reset. Press and release the STEP button on the instrument cluster to switch from odometer, to Trip A or Trip B.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 The EVIC consists of the following: ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) – IF EQUIPPED • Compass Heading Display (N, S, E, W, NE, NW, SE, The Electronic Vehicle Information Center (EVIC) feaSW) tures a driver-interactive display that is located in the • Mileage (Avg/MPG) instrument cluster. • Miles To Empty • Low Tire Information (Tire Pressure Monitor System (TPMS) Displays) — if equipped • Timer • Units • System Warnings (Door Ajar, etc.
204 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by pressing the following buttons on the instrument panel switch bank located below the climate controls: Press and release the MENU button to advance the display to each of the EVIC Main Menu features. Upon reaching the last item in the MENU Main Menu the EVIC will advance to the first Button item in the Main Menu with the next MENU button press and release.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 Press and release the SELECT Button to accept • Right Rear Turn Signal Lamp Out (with a single a selection. The SELECT Button also resets chime) various Trip Functions.
206 UNDERSTANDING YOUR INSTRUMENT PANEL • Remote start aborted — Fuel low • Remote start disabled — System fault • Oil Change Required (with a single chime) indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 The Trip Functions mode displays the following informaTrip Functions Press and release the MENU button until one of the tion: following Trip Functions displays in the EVIC: • ECO (Fuel Saver Indicator) — If Equipped The ECO indicator will illuminate in the EVIC display.
208 UNDERSTANDING YOUR INSTRUMENT PANEL • Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the SELECT button. • Elapsed Time Shows the total elapsed time of travel since the last reset. Elapsed time will increment when the ignition switch is in the ON or START position.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Tire PSI Compass Display Press and release the MENU button until ⬙Tire PSI⬙ is The compass heading indicates the direction highlighted in the EVIC. Press and release the SELECT the vehicle is facing. Press and release the button and one of the following will be displayed: compass button to display one of eight compass heading and the outside tempera• If tire pressure is OK for all tires a vehicle ICON is COMPASS ture.
210 UNDERSTANDING YOUR INSTRUMENT PANEL one or more 360–degree turns (in an area free from large 3. Press and release the DOWN button until “Calibrate metal or metallic objects) until the CAL indicator in the Compass Yes” displays in the EVIC. EVIC turns off. The compass will now function normally. 4. Press and release the SELECT button and the “CAL” NOTE: A good calibration requires a level surface and indicator will quit flashing. an environment free from large metallic objects such as 5.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Magnetic and battery powered devices, (such as cell phones, iPod’s, radar detectors, PDA’s and laptops) should be kept away from the top of the instrument panel. This is where the compass module is located and such devices may interfere and cause false compass readings. 211 1. Turn the ignition switch to the ON position. Leave the shift lever in PARK. 2. Press and release the MENU button until “Personal Settings” displays in the EVIC. 3.
212 UNDERSTANDING YOUR INSTRUMENT PANEL Personal Settings (Customer-Programmable Features) Personal Settings allows the driver to set and recall features when the automatic transaxle is in PARK. Auto Unlock on Exit When ON is selected and the transaxle is in the PARK or NEUTRAL position, all doors will unlock when the driver’s door is opened. To make your selection, press the SELECT button until ON or OFF appears.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 Sound Horn with Lock When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This feature may be selected with or without the Flash Lights with Lock feature. To make your selection, press and release the SELECT button until ON or OFF appears.
214 UNDERSTANDING YOUR INSTRUMENT PANEL Opening either front vehicle door will cancel this feature. Display ECO — If Equipped To make your selection, press the SELECT button until The “ECO” message is located in the EVIC, this message can be turned on or off. To make your selection, press and Off, 45 sec., 5 min., or 10 min. appears. release the SELECT button until “ON” or “OFF” appears. Illumin.
UNDERSTANDING YOUR INSTRUMENT PANEL SETTING THE ANALOG CLOCK 215 MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. 4 To set the analog clock, located at the top center of the instrument panel, press and hold the button in until the setting is correct. The clock will adjust slowly at first and then quicker the longer the button is held.
216 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio. to seek up and the left switch to seek down. The radio Power Switch/Volume Control (Rotary) will remain tuned to the new station until you make Push the ON/VOLUME control knob to turn on the another selection. Holding either button will bypass radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 If your vehicle is not equipped with or this feature is not Clock Setting Procedure available on your vehicle, a “Not Equipped With 1. Press and hold the TIME button until the hours blink. Uconnect Phone” message will display on the radio 2. Adjust the hours by turning the right side TUNE/ screen. SCROLL control knob. Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature 3.
218 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones.
UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
220 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 • Angle – Repeatedly pressing SELECT will change • Set Home Clock - Pressing the SELECT button allows the viewing angle if supported by the DVD disc (if you to set the clock. Turn the TUNE/SCROLL control equipped). knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the minutes. NOTE: Press the TUNE/SCROLL control knob again to save • The available selections for each of the above entries changes. varies depending upon the disc.
222 UNDERSTANDING YOUR INSTRUMENT PANEL Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting ⬙other.⬙ Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number and then push to select.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-preferred settings. AM and FM Buttons Press the buttons to select AM or FM mode. SET Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET button.
224 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play, DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the DVD disc does not match the region code for the radio DVD player, it will not play the disc. Customers may take their vehicle to an authorized dealer to change the region code of the player a maximum of five times.
UNDERSTANDING YOUR INSTRUMENT PANEL Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙EJECTING DISC⬙ when the disc is being ejected and prompt the user to remove the disc. 225 SCAN Button (CD MODE) Press the SCAN button to scan through each track on the CD currently playing.
226 UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however, acceptable • Maximum number of directory levels: 8 MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the • Maximum number of files: 255 following restrictions.
UNDERSTANDING YOUR INSTRUMENT PANEL If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. MPEG Specification Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.MP3/WMA extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3/WMA and will not play the file. MPEG-1 Audio Layer 3 48, 44.
228 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to ⬙elapsed time⬙ display. 229 SCAN Button (Auxiliary Mode) No function. Operation Instructions - Auxiliary Mode EJECT Button (Auxiliary Mode) The auxiliary (AUX) jack is an audio input jack which No function.
230 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Voice Command System (If Equipped) For the radio, Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details. Macrovision This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Sirius service is not available in Hawaii and has limited coverage in Alaska. System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account.
232 UNDERSTANDING YOUR INSTRUMENT PANEL placed within the line of sight of the antenna will cause decreased performance. Larger luggage items such as bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly on or above the antenna. Operating Instructions - Uconnect™ Multimedia (Satellite) Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if available). Also, pressing and holding the INFO button for an additional three seconds will make the radio display the Song Title all of the time (press and hold again to return to normal display). 233 or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected.
234 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within five seconds after pressing the SET button, the channel will continue to play but will not be stored into pushbutton memory.
UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 (SALES CODE RES) 235 Operating Instructions — Radio Mode NOTE: The radio sales code is located on the lower right NOTE: The ignition switch must be in the ON or ACC side of the radio faceplate. position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
236 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 Push the rotary TUNE/SCROLL control knob a second AM/FM Button time and MID will display. Turn the TUNE/SCROLL Press the buttons to select either AM or FM mode. control knob to the right or left to increase or decrease the SET/RND Button — To Set the Pushbutton mid-range tones. Memory Push the rotary TUNE/SCROLL control knob a third When you are receiving a station that you wish to time and TREBLE will display.
238 UNDERSTANDING YOUR INSTRUMENT PANEL and 12 FM stations to be stored into pushbutton memory. • This radio is capable of playing compact discs (CD), The stations stored in SET 2 memory can be selected by recordable compact discs (CD-R), rewritable compact pressing the pushbutton twice. discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Every time a preset button is used, a corresponding Inserting Compact Disc(s) button number will display.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
240 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Press and hold the FF (Fast Forward) button and the CD player will begin to fast forward until FF is released, or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner. Notes on Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restrictions. AM/FM Button Press the button to select either AM or FM mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of • Maximum number of folders. (The radio display of file multisession for CD audio or MP3 playback may result in names and folder names is limited. For large numbers longer disc loading times. of files and/or folders, the radio may be unable to display the file name and folder name, and will assign Supported MP3 File Formats a number instead.
242 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
244 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio. to seek up and the left switch to seek down. The radio Power Switch/Volume Control (Rotary) will remain tuned to the new station until you make Push the ON/VOLUME control knob to turn on the another selection. Holding either button will bypass radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 3. After adjusting the hours, press the right side TUNE/ Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature SCROLL control knob to set the minutes. The minutes (if equipped). Refer to “Uconnect™ Phone” in “Under- will begin to blink. standing The Features If Your Vehicle”. 4. Adjust the minutes using the right side TUNE/ If your vehicle is not equipped with or this feature is not SCROLL control knob.
246 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones.
UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
248 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather hours, press the TUNE/SCROLL control knob to set the minutes. The minutes will begin to blink. Adjust the minutes using the right side TUNE/SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency AM/FM Button station with the same selected Music Type name.
UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice.
250 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. If you have ejected a disc and have not removed it within CAUTION! 10 seconds, it will be reloaded.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 the current selection. Pressing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Press this button while the CD is playing to activate Random Play. This feature plays the selections on the CD and MP3 modes. compact disc in random order to provide an interesting TIME Button change of pace. Press this button to change the display from a large CD playing time display to a small CD playing time display.
252 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Medium Formats (File Systems) • Maximum number of characters in file/folder names: The medium formats supported by the radio are ISO 9660 • Level 1: 12 (including a separator ⬙.⬙ and a threeLevel 1 and Level 2 and includes the Joliet extension. character extension) When reading discs recorded using formats other than • Level 2: 31 (including a separator ⬙.
UNDERSTANDING YOUR INSTRUMENT PANEL When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kHz) MPEG-1 Audio Layer 3 48, 44.1, 32 MPEG-2 Audio Layer 3 24, 22.
254 UNDERSTANDING YOUR INSTRUMENT PANEL To increase the speed of disc loading, it is recommended Press the INFO button once more to return to ⬙elapsed to use CD-R media and single-session discs. To create a time⬙ priority mode. single-session disc, enable the “Disc at Once” option Press and hold the INFO button for three seconds or before writing to the disc. more and the radio will display song titles for each file.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 is not loud enough, turn the device’s volume up. If the System Activation AUX audio sounds distorted, turn the device’s volume Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio down. service that is included with the factory-installed satellite TIME Button (Auxiliary Mode) radio system in your vehicle. Sirius will supply a welPress this button to change the display to time of day.
256 UNDERSTANDING YOUR INSTRUMENT PANEL To access the ESN/SID, refer to the following steps: ESN/SID Access With the ignition switch in the ON/RUN or ACC position and the radio on, press the SETUP button and scroll using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Operating Instructions - Uconnect™ Multimedia (Satellite) Mode INFO Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if availNOTE: The ignition switch must be in the ON/RUN or able). Also, pressing and holding the INFO button for an ACC position to operate the radio.
258 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number.
UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory. The channels stored in SET 2 memory can be selected by pressing the pushbutton twice.
260 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • If the radio has a USB port, refer to the appropriate Uconnect™ Multimedia radio User’s Manual for iPod威 or external USB device support capability. • Connecting an iPod威 or consumer electronic audio device to the AUX port located in the radio faceplate, plays media, but does not use the iPod威 /MP3 control feature to control the connected device.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 NOTE: If the audio device battery is completely discharged, it may not communicate with the iPod威/USB/ MP3 control system until a minimum charge is attained. Leaving the audio device connected to the iPod威/USB/ MP3 control system may charge it to the required level.
262 UNDERSTANDING YOUR INSTRUMENT PANEL • Turning it counterclockwise (backward) by one • While a track is playing, press the INFO button to see click, will jump to the previous track in the list or the associated metadata (artist, track title, album, etc.) press the VR button and say ⬙Previous Track⬙ for that track. Pressing the INFO button again jumps to the next screen of data for that track.
UNDERSTANDING YOUR INSTRUMENT PANEL • RND button (available on sales code RES radio only): Pressing this button toggles between Shuffle ON and Shuffle OFF modes for the iPod威 or external USB device, or press the VR button and say ⬙Shuffle ON⬙ or ⬙Shuffle Off⬙. If the RND icon is showing on the radio display, then the shuffle mode is ON. List Or Browse Mode During Play mode, pressing any of the buttons described below, will bring up List mode.
264 UNDERSTANDING YOUR INSTRUMENT PANEL • Preset 5 – Audiobooks • Preset 6 – Podcasts • Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • To exit List mode without selecting a track, press the same PRESET button again to go back to Play mode. • LIST button: The LIST button will display the top level menu of the iPod威 or external USB device.
UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! Do not plug in or remove the iPod威 or external USB device while driving. Failure to follow this warning could result in an accident. 265 system. Seven devices can be paired to the Uconnect™ phone system, but just one can be selected and played. Selecting Different Audio Device 1. Press PHONE button to begin. 2. After the ⬙Ready⬙ prompt and the following beep, say Bluetooth Streaming Audio (BTSA) ⬙Setup⬙, then ⬙Select Audio Devices⬙.
266 UNDERSTANDING YOUR INSTRUMENT PANEL Browse The remote sound system controls are located on the rear Browsing is not available on a BTSA device. Only the surface of the steering wheel, at the three and nine current song that is playing will display info. o’clock positions. STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The right-hand rocker switch has a pushbutton in the center, and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 Radio Operation CD/DVD DISC MAINTENANCE Pressing the top of the switch will SEEK up for the next To keep a CD/DVD in good condition, take the following listenable station, and pressing the bottom of the switch precautions: will SEEK down for the next listenable station. 1. Handle the disc by its edge; avoid touching the The button located in the center of the left-hand switch surface. will tune to the next preset station that you have pro2.
268 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particu- Manual Heating And Air Conditioning lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. RADIO OPERATION AND MOBILE PHONES Under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from your radio.
UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control Rotate this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position. There are four blower speeds. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left in the “O” (Off) position.
270 UNDERSTANDING YOUR INSTRUMENT PANEL Mode Control (Air Direction) Rotate this control to choose from several patterns of air distribution. You can select either a primary mode as identified by the symbols on the control, or a blend of two of these modes. The closer the setting is to a particular symbol, the more air distribution you receive from that mode. Bi-Level Air is directed through the panel and floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 Recirculation Control Air is directed through the floor, defrost, and side Pressing the Recirculation Control button will temporarily put the system in recirculation window demist outlets. This setting works best in mode. This can be used when outside condicold or snowy conditions that require extra heat to tions such as smoke, odors, dust, or high the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield.
272 UNDERSTANDING YOUR INSTRUMENT PANEL • The A/C will engage automatically to prevent fogging Air Conditioning Control Press this button to engage the Air when the recirculation button is pressed and the mode Conditioning. A light will illuminate control is set to panel or Bi-Level. when the Air Conditioning system is • Recirculated air is not allowed in Floor, Mix or Defrost engaged. Rotating the dial left into the modes.
UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Temperature Control (ATC) — If Equipped 273 Automatic Operation The Automatic Temperature Control system automatically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger. Operation of the system is quite simple. 1. Turn the Mode Control knob (on the right) and the Blower Control knob (on the left) to AUTO. NOTE: The AUTO position performs best for front seat occupants only.
274 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Dial in the temperature you would NOTE: like the system to maintain by rotating • The temperature setting can be adjusted at anytime without affecting automatic operation. the Temperature Control knob. Once the comfort level is selected, the sys• Pressing the Air Conditioning Control button while in tem will maintain that level automatiAUTO mode will cause the LED in the control button cally using the heating system. Should to flash three times and then turn off.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 • While operating in AUTO, the system will not automatically sense the presence of fog, mist or ice on the windshield. The defrost mode must be manually selected to clear the windshield and side glass. Manual Operation This system offers a full complement of manual override features, which consist of Blower Preferred Automatic, Mode Preferred Automatic, or Blower and Mode Preferred Automatic.
276 UNDERSTANDING YOUR INSTRUMENT PANEL
UNDERSTANDING YOUR INSTRUMENT PANEL 277 The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets. • Panel Air is directed through the outlets in the instrument • Mix Air is directed through the floor, defrost, and side panel. These outlets can be adjusted to direct airflow.
278 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control Press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this button a second time to turn OFF the air conditioning. An LED in the button illuminates when manual compressor operation is selected. • Recirculation Control The system will automatically control recirculation.
UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
280 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather.
UNDERSTANDING YOUR INSTRUMENT PANEL 281 Control Setting Suggestions for Various Weather Conditions 4
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 288 䡵 Automatic Transmission . . . . . . . . . . . . . . . . . 292 ▫ Automatic Transmission . . . . . . . . . . . . . . . 288 ▫ Automatic Transmission Ignition Interlock Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 293 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 288 ▫ Extreme Cold Weather (Below –20°F Or ⫺29°C) . . . . . . . . . . . . . . . 289 ▫ If Engine Fails To Start . . . .
284 STARTING AND OPERATING ▫ General Information . . . . . . . . . . . . . . . . . . 299 ▫ Traction Control System (TCS) . . . . . . . . . . . 309 䡵 Driving On Slippery Surfaces . . . . . . . . . . . . . 300 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . 310 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . 300 ▫ Hill Start Assist (HSA) – If Equipped . . . . . . 311 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 ▫ Electronic Stability Control (ESC) . . .
STARTING AND OPERATING 285 ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . 327 䡵 Tire Rotation Recommendations . . . . . . . . . . . 336 ▫ Radial-Ply Tires . . . . . . . . . . . . . . . . . . . . . 329 䡵 Tire Pressure Monitor System (TPMS) . . . . . . . 337 ▫ Spare Tire Matching Original Equipped Tire And Wheel – If Equipped . . . . . . . . . . . . . . 330 ▫ Base System . . . . . . . . . . . . . . . . . . . . . . . . 339 ▫ Compact Spare Tire – If Equipped . . . . . . . .
286 STARTING AND OPERATING 䡵 Flexible Fuel (3.6L Engine Only) — 䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 350 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . ▫ E-85 General Information . . . . . . . . . . . . . . . 350 ▫ Loose Filler Cap Message . . . . . . . . ▫ Ethanol Fuel (E-85) . . . . . . . . . . . . . . . . . . . 351 䡵 Vehicle Loading . . . . . . . . . . . . . . . . ▫ Fuel Requirements . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 287 ▫ Trailer Towing Weights 䡵 Recreational Towing (Maximum Trailer Weight Ratings) . . . . . . . . 362 (Behind Motorhome, Etc.) . . . . . . . . . . . . . . . . 369 ▫ Trailer And Tongue Weight . . . . . . . . . . . . . 363 ▫ Towing Requirements . . . . . . . . . . . . . . . . . 364 ▫ Towing This Vehicle Behind Another Vehicle . . . . . . . . . . . . . . . . 369 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . .
288 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the keys in the ignition.
STARTING AND OPERATING 289 For vehicles equipped with Tip Start (Six-Speed Trans- If Engine Fails To Start mission), turn the ignition switch to the START position WARNING! and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage auto• Never pour fuel or other flammable liquids into matically when the engine is running.
290 STARTING AND OPERATING Without Tip Start If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” procedures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded.
STARTING AND OPERATING CAUTION! To prevent damage to the starter, wait 10 to 15 seconds before trying again. 291 The engine block heater cord is bundled under the hood between the headlight assembly and the Totally Integrated Power Module (Fuse Box) on the driver’s side of the vehicle. The engine block heater must be plugged in at least one After Starting hour to have an adequate warning effect on the engine. The idle speed will automatically decrease as the engine warms up.
292 STARTING AND OPERATING AUTOMATIC TRANSMISSION NOTE: You MUST press and hold the brake pedal down while shifting the shift lever out of PARK. CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift the shift lever into PARK only after the vehicle has come to a complete stop. • Shift the shift lever into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
STARTING AND OPERATING WARNING! (Continued) • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the vehicle into PARK, remove the key from the ignition, and apply the parking brake. Once the key is removed from the ignition, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
294 STARTING AND OPERATING Brake/Transmission Interlock System This vehicle is equipped with a Brake Transmission Shift Interlock System (BTSI) that holds the shift lever in the PARK position when the ignition switch is in the LOCK position. To move the shift lever out of the PARK position, the ignition switch must be turned to the ON or START position (engine running or not) and the brake pedal must be pressed.
STARTING AND OPERATING When parking on a flat surface, place the shift lever into the PARK position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
296 STARTING AND OPERATING NEUTRAL This range is used when vehicle is standing for prolonged periods with engine running. Engine may be started in this range. Set the parking brake and shift the transmission into PARK if you must leave the vehicle. WARNING! Do not coast in NEUTRAL and never turn off the ignition switch to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision.
STARTING AND OPERATING DRIVE 3 — Four-Speed Transmission This range eliminates shifts into fourth gear. The transmission will operate normally in first and second gear. Shifts into third gear may be delayed to provide second gear operation at higher speeds.
298 STARTING AND OPERATING In the event of a momentary problem, the transmission AUTOSTICK姞 — IF EQUIPPED can be reset to regain all forward gears by performing the AutoStick威 is a driver-interactive feature providing manual shift control, giving you more control of the following steps: vehicle. AutoStick威 allows you to maximize engine brak1. Stop the vehicle. ing, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system can 2. Shift the shift lever into PARK.
STARTING AND OPERATING 299 NOTE: In AutoStick威 mode, the transmission will only • Avoid using speed control when AutoStick威 is enshift up or down when the driver moves the shift lever to gaged. the right (+) or left (-). • The transmission will automatically shift up when maximum engine speed is reached while AutoStick威 is AutoStick威 is deactivated when the shift lever is moved engaged. from the AutoStick (+/-) position into the DRIVE position.
300 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Acceleration Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the front (driving) wheels. WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels.
STARTING AND OPERATING DRIVING THROUGH WATER Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising Water WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly.
302 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
STARTING AND OPERATING POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers.
304 STARTING AND OPERATING Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized dealer. CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components.
STARTING AND OPERATING The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible. To release the parking brake, pull the lever up slightly, press the center button, then lower the lever completely. 305 When the parking brake is applied with the ignition switch ON, the “Brake Warning Light” in the instrument cluster will illuminate.
306 STARTING AND OPERATING make it difficult to move the shift lever out of PARK. The parking brake should always be applied whenever the driver is not in the vehicle. WARNING! • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
STARTING AND OPERATING ANTI-LOCK BRAKE SYSTEM (ABS) The Anti-Lock Brake System (ABS) provides increased vehicle stability and brake performance under most braking conditions. The system operates with a separate computer to modulate the hydraulic pressure to prevent wheel lock-up and avoid skidding on slippery surfaces. WARNING! • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer.
308 STARTING AND OPERATING service is required. However, the conventional brake properly. This self check occurs each time the vehicle is system will continue to operate normally if the “Brake started and accelerated past 7 mph (11 km/h). Warning Light” is not on. ABS is activated during braking under certain road or If the “Anti-Lock Brake Warning Light” is on, the brake stopping conditions.
STARTING AND OPERATING WARNING! The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals. 309 together to enhance vehicle stability and control in various driving conditions and are commonly referred to as ESC.
310 STARTING AND OPERATING spinning faster than the other, the system will apply the reduce brake pedal pressure unless braking is no longer brake of the spinning wheel. This will allow more engine desired. Once the brake pedal is released, the BAS is torque to be applied to the wheel that is not spinning. deactivated. This feature remains active even if TCS and ESC are in WARNING! the “Partial Off” mode. Refer to “Electronic Stability Control (ESC)” in this section of this manual.
STARTING AND OPERATING 311 Hill Start Assist (HSA) – If Equipped The HSA system is designed to assist the driver in launching a vehicle on an incline. HSA will maintain the level of brake pressure the driver inputs for a short duration once the driver takes his foot off of the brake pedal. If the driver does not apply the throttle during this short duration, the system will release brake pressure and the vehicle will roll down the incline.
312 STARTING AND OPERATING The system will only work if the intended direction of the 3. Apply the parking brake. vehicle and vehicle gear match. For example, if the intended 4. Start the engine. direction is forward up a hill and the vehicle is in DRIVE 5. Release the clutch pedal. and the activation criteria are met, HSA will activate. The system will work in REVERSE and all forward gears, 6. Rotate the steering wheel one-half turn to the left. and will not activate if the vehicle is placed in 7.
STARTING AND OPERATING 313 EVIC Equipped Vehicles • Over-steer - when the vehicle is turning more than HSA is a Customer Programmable Feature on a EVIC appropriate for the steering wheel position. equipped vehicle. If you wish to turn off the HSA feature, • Under-steer - when the vehicle is turning less than refer to “Electronic Vehicle Information Center (EVIC)/ appropriate for the steering wheel position. Customer Programmable Features” in “Understanding Your Instrument Panel” for further information.
314 STARTING AND OPERATING reduction. This mode is intended to be used if the vehicle ESC Operating Modes All ESC equipped vehicles can choose the following ESC is in deep snow, sand, or gravel conditions and more wheel spin than ESC would normally allow is required to operating modes: gain traction. ESC On This is the normal operating mode for ESC. Whenever the vehicle is started the ESC system will be in this mode. This mode should be used for almost all driving situations.
STARTING AND OPERATING 315 To turn ESC on again, momentarily press the “ESC Off” ESC Activation/Malfunction Indicator Light And switch. This will restore the normal “ESC On” mode of ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator operation. Light” in the instrument cluster will come on WARNING! when the ignition switch is turned to the ON position. It should go out with the engine In partial ESC mode, the engine power reduction running.
316 STARTING AND OPERATING Malfunction Indicator Light” begins to flash during ac- TIRE SAFETY INFORMATION celeration, ease up on the accelerator and apply as little Tire Markings throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. NOTE: • The “ESC Activation/Malfunction Indicator Light” and the “ESC OFF Indicator Light” come on momentarily each time the ignition switch is turned ON.
STARTING AND OPERATING 317 NOTE: • LT (Light Truck) - Metric tire sizing is based on U.S. • P (Passenger) - Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric design standards. P-Metric tires have the letter “P” tires is the same as for P-Metric tires except for the molded into the sidewall preceding the size designaletters “LT” that are molded into the sidewall precedtion. Example: P215/65R15 95H. ing the size designation. Example: LT235/85R16.
318 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
STARTING AND OPERATING 319 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
320 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING 321 Tire Terminology And Definitions Term B-Pillar Cold Tire Pressure Maximum Inflation Pressure Recommended Inflation Pressure Tire Placard Definition The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.
322 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar.
STARTING AND OPERATING This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. 323 axles must not be exceeded. For further information on GAWRs, vehicle loading, and trailer towing, refer to “Vehicle Loading” in this section.
324 STARTING AND OPERATING 3. Subtract the combined weight of the driver and pas- NOTE: • The following table shows examples on how to calcusengers from XXX lbs or XXX kg. late total load, cargo/luggage, and towing capacities 4. The resulting figure equals the available amount of of your vehicle with varying seating configurations cargo and luggage load capacity. For example, if “XXX” and number and size of occupants.
STARTING AND OPERATING 325
326 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement.
328 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
STARTING AND OPERATING 329 loading may be required for high-speed vehicle opera- Radial-Ply Tires tion. Refer to original equipment or an authorized tire WARNING! dealer for recommended safe operating speeds, loading and cold tire inflation pressures. Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle WARNING! poorly. The instability could cause a collision. AlHigh speed driving with your vehicle under maxiways use radial ply tires in sets of four.
330 STARTING AND OPERATING Do not install more than one non-matching temporary Spare Tire Matching Original Equipped Tire and use spare tire/wheel on the vehicle at any given time. Wheel – If Equipped The spare tire of your vehicle is equivalent in look and CAUTION! function as the original equipment tire and wheel found on the front or rear axle of your vehicle. This spare tire Because of the reduced ground clearance, do not take may be used in the tire rotation for your vehicle.
STARTING AND OPERATING 331 Since this tire has limited tread life the original equip- Full Size Spare – If Equipped ment tire should be repaired (or replaced) and reinstalled The full size spare is for temporary emergency use only. This tire may look like the original equipped tire on the on your vehicle at the first opportunity. front or rear axle of your vehicle, but it is not. This spare Do not install a wheel cover or attempt to mount a tire may have limited tread life.
332 STARTING AND OPERATING your original equipment tire, replace (or repair) the Tire Spinning original equipment tire and reinstall on the vehicle at the When stuck in mud, sand, snow, or icy conditions, do not spin your vehicle’s wheels faster than 30 mph (48 km/h) first opportunity. or for longer than 30 seconds continuously without WARNING! stopping. Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling.
STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. 333 These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced.
334 STARTING AND OPERATING Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline. Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure.
STARTING AND OPERATING WARNING! (Continued) • Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control. CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer readings. 335 SNOW TIRES Some areas of the country require the use of snow tires during the winter. All season tires can be identified by the M+S designation on the tire sidewall.
336 STARTING AND OPERATING poorer than that of non-studded tires. Some states pro- The suggested rotation method is the “rearward cross” hibit studded tires; therefore, local laws should be shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be checked before using these tire types. reversed.
STARTING AND OPERATING 337 TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The TPM System will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.
338 STARTING AND OPERATING For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 23 psi (158 kPa). This tire pressure is sufficiently low enough to turn ON the “Tire Pressure Monitoring Telltale Light.
STARTING AND OPERATING 339 NOTE: • Seasonal temperature changes will affect tire pressure, • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance, or to provide warning of a tire the tire. failure or condition. Base System • The TPMS should not be used as a tire pressure gauge The Tire Pressure Monitor System (TPMS) uses wireless while adjusting your tire pressure.
340 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster, a ⬙LOW TIRE⬙ message will be displayed for a minimum of five seconds and a chime will sound when tire pressure is low in one or more of the four active road tires.
STARTING AND OPERATING 341 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically and the “Tire Pressure Monitoring Telltale Light” will turn OFF, as long no tire pressure is below the low-pressure warning limit in 2. If you install the compact spare tire in place of a road any of the four active road tires.
342 STARTING AND OPERATING The TPMS consists of the following components: • Receiver Module • Four Tire Pressure Monitoring Sensors • Three Trigger Modules (mounted in three of the four wheel-wells) • Various Tire Pressure Monitoring System Messages, which display in the Electronic Vehicle Information Center (EVIC) • Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster and a chime will
STARTING AND OPERATING 343 Should this occur, you should stop as soon as possible, display dashes (- -) in place of the pressure value to and inflate all tires with low pressure (those flashing in indicate which sensor is not being received. the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
344 STARTING AND OPERATING The EVIC will also display a ⬙CHECK TPM SYSTEM⬙ message for a minimum of five seconds when a system fault related to an incorrect sensor location fault is detected. In this case, the ⬙CHECK TPM SYSTEM⬙ message is then followed with a graphic display with pressure values still shown. This indicates that the pressure values are still being received from the TPM sensors but they may not be located in the correct vehicle position. 1.
STARTING AND OPERATING 345 Monitoring Telltale Light” will remain ON, a chime will 5. Once you repair or replace the original road tire, and sound, and the EVIC will still display a flashing pressure reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically. In addition, the value in the graphic display. “Tire Pressure Monitoring Telltale Light” will turn OFF 3.
346 STARTING AND OPERATING The tire pressure sensors are covered under one of the as hard starting, stalling, and hesitations. If you experifollowing licenses: ence these symptoms, try another brand of gasoline before considering service for the vehicle. United States . . . . . . . . . . . . . . . . . . . KR5S18002015B Over 40 auto manufacturers worldwide have issued and Canada. . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 347 The manufacturer supports the use of reformulated gasoline. Properly blended reformulated gasoline will provide excellent performance and durability of engine and fuel system components. Problems that result from using gasoline containing Methanol or gasoline containing more than 10% Ethanol are not the responsibility of the manufacturer and may not be covered under warranty. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as Ethanol.
348 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle. The MMT content E-85 perform the following: of gasoline may not be indicated on the gasoline pump, • change the engine oil and oil filter therefore, you should ask your gasoline retailer whether the gasoline contains MMT.
STARTING AND OPERATING Fuel System Cautions 349 CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat.
350 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
STARTING AND OPERATING the other sections of this manual for information on features that are common between Flexible Fuel and gasoline-only powered vehicles. 351 CAUTION! Only vehicles with the E-85 fuel filler door label can operate on E-85. Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. WARNING! E-85 Fuel Cap Ethanol vapors are extremely flammable and could cause serious personal injury.
352 STARTING AND OPERATING NOTE: Fuel Requirements Your vehicle will operate on both unleaded gasoline with • When the ambient temperature is above 90° F (32° C), an octane rating of 87, or E-85 fuel, or any mixture of you may experience hard starting and rough idle these two. For best results, a refueling pattern that following start up even if the above recommendations alternates between E-85 and unleaded gasoline should be are followed. avoided.
STARTING AND OPERATING requirements of Material Standard MS-6395. MS-6395 contains additional requirements, developed during extensive fleet testing, to provide additional protection to Chrysler Group LLC engines. Use MOPAR威 or an equivalent oil meeting the specification MS-6395. Starting The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C).
354 STARTING AND OPERATING Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability. ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle. If the gas cap is lost or Fuel Filler Door damaged, be sure the replacement cap is for use with this After removing the gas cap, place the gas cap tether cable vehicle.
STARTING AND OPERATING 355 CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on. • To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. When the fuel nozzle “clicks” or shuts off, the fuel tank is full.
356 STARTING AND OPERATING Loose Filler Cap Message If the vehicles diagnostic system determines that the fuel • Never add fuel when the engine is running. This is filler cap in loose, improperly installed, or damaged, a in violation of most state and federal fire regula- “gASCAP” message will be displayed in the instrument tions and doing so may cause the MIL to turn on. cluster. Tighten the gas cap until a “clicking” sound is • A fire may result if gasoline is pumped into a heard.
STARTING AND OPERATING VEHICLE LOADING 357 The bar code allows a computer scanner to read the Vehicle Identification Number (VIN). Vehicle Certification Label Your vehicle has a certification label attached to the rear Gross Vehicle Weight Rating (GVWR) of the driver’s door. The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo. The total load The label contains the following information: must be limited so that you do not exceed the GVWR.
358 STARTING AND OPERATING Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GAWR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation. Weigh it on a commercial scale to ensure that it is not over the GVWR.
STARTING AND OPERATING 359 To maintain warranty coverage, follow the requirements Gross Trailer Weight (GTW) and recommendations in this manual concerning ve- The GTW is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or temhicles used for trailer towing. porary) loaded in or on the trailer in its ⬙loaded and If you have any questions or concerns after reviewing ready for operation⬙ condition.
360 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting and Operating” for further information. WARNING! It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded.
STARTING AND OPERATING Weight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the truck. These kinds of hitches are the most popular on the market today and they are commonly used to tow small- and mediumsized trailers. 361 Trailer Hitch Classification Definitions Class Max.
362 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum Trailer Weight Ratings Max. GTW Max. Trailer Tongue Wt. Engine/Transmission Max. Frontal Area (Gross Trailer Wt.) (See Note 1) 2.4L/Auto See Note 2 1,000 lbs (450 kg) 100 lbs (45 kg) 3.6L/Auto 22 sq.ft. (2.0 sq.m) 2,000 lbs (900 kg) 200 lbs (90 kg) Refer to local laws for maximum trailer towing speeds.
STARTING AND OPERATING 363 CAUTION! Towing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme conditions. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
364 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to “Tire Safety Information/Tire and Loading Information Placard” in “Starting and Operating” for the maximum combined weight of occupants and cargo for your vehicle.
STARTING AND OPERATING WARNING! 365 WARNING! (Continued) Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and that it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision.
366 STARTING AND OPERATING WARNING! (Continued) 3. GAWR 4. Trailer tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve 10% of trailer tongue weight as a percentage of total trailer weight). • Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tires – General Information” in “Starting and Operating” for information on tread wear indicators and for proper inspection procedure.
STARTING AND OPERATING • An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. • Trailer brakes are recommended for trailers over 1,000 lbs (450 kg) and required for trailers in excess of 2,000 lbs (907 kg).
368 STARTING AND OPERATING If you REGULARLY TOW a trailer for more than 45 minutes of continuous operation, then change the automatic transmission fluid and filter according to the interval specified for “police, taxi, fleet, or frequent trailer towing.” Refer to the “Maintenance Schedule” for the proper Make sure all trailer and vehicle lights are working maintenance intervals. properly — including hazard flashers.
STARTING AND OPERATING 369 • Use speed control in flat terrain and with light loads to RECREATIONAL TOWING maximize fuel efficiency. (BEHIND MOTORHOME, ETC.) Cooling System Towing This Vehicle Behind Another Vehicle To reduce potential for engine and transmission over- Recreational towing is not allowed. heating, take the following actions: • City Driving When stopped for short periods of time, shift the transmission into NEUTRAL and increase engine idle speed. • Highway Driving Reduce speed.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 372 䡵 Jump-Starting . . . . . . . . . . . . . . . . . . . . . . . . 381 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 372 ▫ Preparations For Jump-Start . . . . . . . . . . . . . 382 ▫ Engine Oil Overheating (2.4L Engine Only) — If Equipped . . . . . . . . 373 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . 384 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 374 ▫ Jack Location . .
372 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional • On the highways — Slow down.
WHAT TO DO IN EMERGENCIES 373 NOTE: There are steps that you can take to slow down Engine Oil Overheating (2.4L Engine Only) — an impending overheat condition: If Equipped During sustained high-speed driving or trailer tow up • If your air conditioner (A/C) is on, turn it off. The A/C long grades on a hot day, the engine oil temperature may system adds heat to the engine cooling system and become too hot. If this happens, the “HOTOIL” message turning the A/C off can help remove this heat.
374 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
WHAT TO DO IN EMERGENCIES 375 WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on the Hazard Warning flashers. 3. Set the parking brake. 4. Place the shift lever into PARK (automatic transmission) or REVERSE (manual transmission). Spare Tire and Jack Stowage Preparations For Jacking 1. Park the vehicle on a firm, level surface.
376 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES WARNING! (Continued) • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. Jack Warning Label 377 CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle.
378 WHAT TO DO IN EMERGENCIES NOTE: The jack handle attaches to the side of the jack 2. Loosen, but do not remove, the wheel nuts by turning with two attachment points. When the jack is partially them to the left one turn while the wheel is still on the expanded, the tension between the two attachment ground. points holds the jack handle in place. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3.
WHAT TO DO IN EMERGENCIES 379 3. There is a front and rear jacking location on each side of the vehicle. 6 Rear Jacking Location Front Jacking Location 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. Do not raise the vehicle until you are sure the jack is securely engaged.
380 WHAT TO DO IN EMERGENCIES WARNING! CAUTION! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench.
WHAT TO DO IN EMERGENCIES each nut has been tightened twice. The correct wheel nut torque is 100 ft lbs (135 N·m). If you doubt that you have tightened the nuts correctly, have them checked with a torque wrench by your authorized dealer or at a service station. 381 WARNING! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immediately. 9. Remove the wheel blocks and lower the jack until it is free.
382 WHAT TO DO IN EMERGENCIES CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. Preparations For Jump-Start The battery in your vehicle is located between the left front headlight assembly and the left front wheel splash shield.
WHAT TO DO IN EMERGENCIES WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
384 WHAT TO DO IN EMERGENCIES WARNING! 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery.
WHAT TO DO IN EMERGENCIES 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. 385 10. Reinstall the protective cover over the remote positive (+) battery post of the discharged vehicle.
386 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE and REVERSE. Using minimal accelerator pedal pressure to maintain the rocking motion, without spinning the wheels, is most effective. CAUTION! Racing the engine or spinning the wheels may lead to transmission overheating and failure.
WHAT TO DO IN EMERGENCIES WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed.
388 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE Towing Condition Flat Tow Wheels OFF the Ground NONE ALL MODELS If transmission is operable: • Trans in NEUTRAL Wheel Lift Or Dolly Tow Flatbed Rear Front ALL • 25 mph (40 km/h)max speed • 15 mi (24 km) max distance OK BEST METHOD Proper towing or lifting equipment is required to prevent If you must use the accessories (wipers, defrosters, etc.) damage to your vehicle.
WHAT TO DO IN EMERGENCIES CAUTION! • Do not use sling type equipment when towing. Damage to the fascia will occur. • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and transmission may result.
390 WHAT TO DO IN EMERGENCIES If the transmission is not operable, or the vehicle must be towed faster than 25 mph (40 km/h) or farther than 15 mi (24 km), it must be towed with the front wheels OFF the ground (using a flatbed truck, towing dolly, or wheel lift equipment with the front wheels raised). CAUTION! Towing faster than 25 mph (40 km/h) or farther than 15 mi (24 km) with front wheels on the ground can cause severe damage to the transmission.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.4L . . . . . . . . . . . . . 393 䡵 Maintenance Procedures . . . . . . . . . . . . . . . . . 398 䡵 Engine Compartment — 3.6L . . . . . . . . . . . . . 394 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 399 䡵 Onboard Diagnostic System — OBD II . . . . . . 395 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 402 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 395 ▫ Engine Air Cleaner Filter . . . . . . . . . .
392 MAINTAINING YOUR VEHICLE ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . 409 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 434 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . 409 ▫ High Intensity Discharge Headlamps (HID) . . . . . . . . . . . . . . . . . . . . 434 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . 412 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 417 ▫ Automatic Transmission . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 393 ENGINE COMPARTMENT — 2.
394 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
396 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the “Malfunction Indicator Light (MIL).” Resolving the problem will turn the MIL light off. Normally, the OBD II system will be ready. The OBD II system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacement.
MAINTAINING YOUR VEHICLE 397 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a. The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
398 MAINTAINING YOUR VEHICLE DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
400 MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill cap is replaced and tightened after adding oil.
MAINTAINING YOUR VEHICLE CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty. 401 Lubricants which do not have both the engine oil certification mark and the correct SAE viscosity grade number should not be used. Engine Oil Viscosity (SAE Grade) – 3.6L Engine SAE 5W-30 engine oil is preferred for all operating temperatures.
402 MAINTAINING YOUR VEHICLE Lubricants which do not have both, the engine oil certi- Disposing Of Used Engine Oil And Oil Filters fication mark and the correct SAE viscosity grade num- Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, ber should not be used. indiscriminately discarded, can present a problem to the Synthetic Engine Oils environment.
MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
404 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components. Such damage is not covered by the New Vehicle Limited Warranty.
406 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a air conditioning refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. The A/C Air Filter is located in the fresh air inlet behind the glove box.
MAINTAINING YOUR VEHICLE 407 CAUTION! The A/C Air Filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8. Reinstall the glove box door dampener and glove box. A/C Air Filter Replacement 6. Remove the A/C Air Filter by pulling it straight out of the housing. 7. Install the A/C Air Filter with the arrow on the filter pointing toward the floor.
408 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring.
MAINTAINING YOUR VEHICLE Adding Washer Fluid The fluid reservoir for the windshield washers is located in the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water. WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you.
410 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information. • A hot exhaust system can start a fire if you park over materials that can burn.
MAINTAINING YOUR VEHICLE 411 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
412 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE Selection Of Coolant Use only the manufacturer’s recommended coolant. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. CAUTION! • Mixing of engine coolant (antifreeze) other than specified HOAT engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
414 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid Please note that it is the owner’s responsibility to mainOrganic Additive Technology (HOAT) engine coolant tain the proper level of protection against freezing according to the temperatures occurring in the area where (antifreeze). When adding engine coolant (antifreeze): the vehicle is operated.
MAINTAINING YOUR VEHICLE WARNING! 415 rules for your community. To prevent ingestion by animals or children, do not store ethylene glycol based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution.
416 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for engine coolant (antifreeze) freeze point or replacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. 417 WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
418 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Fluid level can be expected to fall as the brake pads wear. Brake fluid level should be checked when pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed.
MAINTAINING YOUR VEHICLE 419 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure. This could result in a collision.
420 MAINTAINING YOUR VEHICLE Selection Of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only the manufacturer’s recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid.
MAINTAINING YOUR VEHICLE 421 6. Remove the dipstick and determine if the fluid is hot Fluid Level Check – 2.4L Engine Use the following procedure to check the automatic or cold. Hot fluid is approximately 180° F (82° C), which transmission fluid level properly: is the normal operating temperature after the vehicle is driven at least 15 miles (24 km). Hot fluid cannot be held 1. Park the vehicle on level ground. comfortably between the fingertips. Cold fluid is at a 2.
422 MAINTAINING YOUR VEHICLE CAUTION! • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will require more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. • Dirt and water in the transmission can cause serious damage.
MAINTAINING YOUR VEHICLE 423 hot or cold weather and other extreme conditions will Washing have an adverse effect on paint, metal trim, and under• Wash your vehicle regularly. Always wash your vebody protection. hicle in the shade using MOPAR威 Car Wash or equivalent, or a mild car wash soap, and rinse the panels The following maintenance recommendations will enable completely with clear water. you to obtain maximum benefit from the corrosion resistance built into your vehicle.
424 MAINTAINING YOUR VEHICLE CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner.
MAINTAINING YOUR VEHICLE Wheel And Wheel Trim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. To remove heavy soil and/or excessive brake dust, use MOPAR威 Wheel Cleaner or equivalent or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only MOPAR威 or equivalent is recommended. Do not use oven cleaner.
426 MAINTAINING YOUR VEHICLE • For grease stains, apply MOPAR威 Multi-Purpose if absolutely necessary. Do not use harsh cleaners or Cleaner or equivalent to a clean, damp cloth and Armor All威. Use MOPAR威 Total Clean or equivalent to remove the stain. Use a fresh, damp towel to remove clean vinyl upholstery. soap residue. Cleaning Leather Upholstery • Do not use any harsh solvents or any other form of MOPAR威 Total Clean or equivalent is specifically recommended for leather upholstery.
MAINTAINING YOUR VEHICLE WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Glass Surfaces All glass surfaces should be cleaned on a regular basis with MOPAR威 Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the inside rear window equipped with electric defrosters or the right rear quarter window equipped with the radio antenna.
428 MAINTAINING YOUR VEHICLE Replace the belts if they appear frayed or worn or if the Installation Align the liner in the cupholder and press down firmly. buckles do not work properly. Cleaning Center Console Cupholders Removal Grab the rubber portion of the cupholder and lift upward. FUSES Totally Integrated Power Module The Totally Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses.
MAINTAINING YOUR VEHICLE Cartridge Fuse Mini Fuse 3 — 10 Amp Red 4 — 5 — 6 — Cavity Totally Integrated Power Module Cavity 1 2 Cartridge Fuse 40 Amp Green — Mini Fuse Description 7 — — Power Top Module – If Equipped 8 — 20 Amp Yellow AWD Module 10 Amp Red 20 Amp Yellow 10 Amp Red 30 Amp Green 30 Amp Green 429 Description Center High Mounted Stop Light (CHMSL)/Brake Switch Ignition Switch Trailer Tow – If Equipped Power Mirror Switch/Climate Controls Ignition Off Draw (IOD) Sense
430 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse 9 40 Amp Green 10 11 12 — — — 13 — 14 — Mini Fuse 20 Amp Yellow 15 Amp Lt Blue 20 Amp Yellow 20 Amp Yellow 10 Amp Red Description Battery Feed – Power Seats – If Equipped/ PZEV Air Pump – If Equipped Instrument Panel/ Power Locks/Interior Lights Selectable Power Outlet (Inside Center Arm Rest) Cavity 15 Cartridge Fuse 40 Amp Green Mini Fuse — 16 — 15 Amp Lt.
MAINTAINING YOUR VEHICLE Cartridge Fuse Mini Fuse 22 — 10 Amp Red 23 — 24 — 25 — 10 Amp Red — 15 Amp Lt. Blue Cavity 26 15 Amp Lt.
432 MAINTAINING YOUR VEHICLE Cavity 32 33 34 Cartridge Fuse 30 Amp Pink — 30 Amp Pink Mini Fuse — 10 Amp Red — Description Auto Shutdown (ASD) Relay 1 Switch Bank/ Diagnostic Link Connector/ Powertrain Control Module (PCM) Anti-Lock Brakes (ABS) Module – If Equipped/Electronic Stability Control (ESC) Module – If Equipped Cavity Cartridge Fuse Mini Fuse 35 40 Amp Green — 36 30 Amp Pink — 37 — 25 Amp Natural Description Anti-Lock Brakes (ABS) Module – If Equipped/Electronic Stability C
MAINTAINING YOUR VEHICLE CAUTION! • When installing the Totally Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Totally Integrated Power Module, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating.
434 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS LIGHT BULBS – Exterior Bulb No. All the inside bulbs are brass or glass wedge base. Bi-Halogen Headlamp . . . . . . . . . . . . . . . . . . . . HIR2 Aluminum base bulbs are not approved and should not (Serviced at Authorized Dealer) be used for replacement. Front Turn Signal Lamp. . . . . . . . . . . . . . . . 3157NAK Front Park Lamp . . LED (Serviced at Authorized Dealer) LIGHT BULBS – Interior Bulb No. Front Fog Lamp . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 435 this, you should not attempt to service a headlamp bulb Front Turn Signal yourself. If a headlamp bulb fails, take your vehicle to 1. Raise and prop open the hood. an authorized dealer for service. 2. Rotate the bulb’s electrical connector one-quarter turn WARNING! counterclockwise and remove it from the headlamp housing. A transient high tension occurs at the bulb sockets of HID headlamps when the headlamp switch is turned 3.
436 MAINTAINING YOUR VEHICLE 1. Rotate the bulb’s electrical connector one-quarter turn Backup Lamps counterclockwise and remove it from the fog lamp hous1. Open the trunk and gently pull back the trunk liner ing. behind the tail lamp. 2. Remove the bulb from the connector socket and install 2. Remove the two plastic wing nuts from the tail lamp the replacement bulb. housing. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
MAINTAINING YOUR VEHICLE 437 3. Grasp the tail lamp and pull firmly outward pushing 4. Twist and remove socket from lamp. on the studs from inside to disengage the lamp housing. 5. Remove bulb from socket and replace. NOTE: Placing a small flat head screwdriver or similar License Plate Lamp tool between the lamp outboard ball stud and plastic grommet from inside the trunk can assist in lamp re- 1.
438 MAINTAINING YOUR VEHICLE FLUID CAPACITIES U.S. Fuel (Approximate) All Engines — (Except 2.4L PZEV) 16.9 Gallons 2.4L PZEV (Partial Zero Emissions Vehicle) 18.5 Gallons Engine Oil with Filter 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 3.6L Engine (SAE 5W-30, API Certified) 6 Quarts Cooling System* 2.4L Engine (MOPAR威 Antifreeze/Coolant 5 7.7 Quarts Year/100,000 Mile Formula or equivalent) 3.6L Engine (MOPAR威 Antifreeze/Coolant 5 11.
MAINTAINING YOUR VEHICLE 439 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 2.4L Engine Engine Oil – 3.6L Engine Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade.
440 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. MOPAR威 Power Steering Fluid +4, MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product.
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 442 ▫ Required Maintenance Intervals . . . . . . . . . .
M A I N T E N A N C E 442 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done S anytime a malfunction is suspected.
MAINTENANCE SCHEDULES 443 M • Change your engine oil more often if you drive your At Each Stop For Fuel vehicle off-road for an extended period of time. • Check the engine oil level about five minutes after a • Under no circumstances should oil change intervals fully warmed engine is shut off. Checking the oil level exceed 8,000 miles (13 000 km) or six months, whichwhile the vehicle is on level ground will improve the ever comes first. accuracy of the oil level reading.
M A I N T E N A N C E 444 MAINTENANCE SCHEDULES Once A Month • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required. • Check the fluid levels of coolant reservoir, brake master cylinder, and transmission and add as needed. S C H • Check all lights and other electrical items for correct E operation.
MAINTENANCE SCHEDULES 8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 445 M 16,000 Miles (26,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 446 MAINTENANCE SCHEDULES A I 24,000 Miles (39,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 24,000 miles (39 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule 48,000 Miles (78,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center 447 M Date Dealer Code ❏ Change the engine oil and engine oil filter.
M 448 MAINTENANCE SCHEDULES A I 56,000 Miles (91,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 56,000 miles (91 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 72,000 Miles (117,000 km) or 54 Months Maintenance Service Schedule 80,000 Miles (130,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
M 450 MAINTENANCE SCHEDULES A I 88,000 Miles (143,000 km) or N T 66 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 88,000 miles (143 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 104,000 Miles (169,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ Flush and replace the engine coolant at 104,000 miles (169 000 km) or 60 months whichever comes first.
M 452 MAINTENANCE SCHEDULES A I 120,000 Miles (195,000 km) or N T 90 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 120,000 miles (195 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system. ❏ Change the automatic transmission fluid and filter(s). ❏ Replace the accessory drive belt(s).
MAINTENANCE SCHEDULES 136,000 Miles (221,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 136,000 miles (221 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 453 M 144,000 Miles (234,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 454 MAINTENANCE SCHEDULES A I 152,000 Miles (247,000 km) or N T 114 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 152,000 miles (247 000 km).
MAINTENANCE SCHEDULES † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 461 ▫ Prepare For The Appointment . . . . . . . . . . . 459 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 461 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 459 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
458 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 465 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 465 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 465 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 459 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
460 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 Auburn Hills, MI 48321–8004 solved with this process. Phone: (800) 247–9753 • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center P.O. Box 1621 ship. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
462 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 463 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
464 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC vemaintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. 465 significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
466 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
468 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . 304 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . 307 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 413 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 354 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 409 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 348 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 403 Air Conditioner Maintenance . . . . . . . . . .
INDEX 469 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 Belts, Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Body Mechanism Lubrication . . . . . . . . . . . . . . . 407 Brake Assist System . . . . . . . . . . . . . . . . . . . . . . 310 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . 417 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . . 307 Fluid Check . . . . . . . . . . . . . . . . . . . . . 417,440 Master Cylinder . . . . . . . . .
470 INDEX Capacities, Fluid . . . . . . . . . . . . . . . . . . . . . . . . 438 Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . 393,401 Power Steering . . . . . . . . . . . . . . . . . . . . . . 304 Radiator (Coolant Pressure) . . . . . . . . . . . . . 414 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423 Carbon Monoxide Warning . . . . . . . . . . . . . . . 84,350 Cellular Phone . . . . . . . . .
INDEX Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 461 Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 414 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 412 Adding Coolant (Antifreeze) . . . . . . . . . . . . . 413 Coolant Capacity . . . . . . . . . . . . . . . . . . . . . 438 Coolant Level . . . . . . . . . . . . . . . . . . . . 412,415 Disposal of Used Coolant . . . . . . . . . . . . . . . 415 Drain, Flush, and Refill . . . . . . . . . . . . . . . .
472 INDEX Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . . 300 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 403 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . 291 Through Flowing, Rising, or Shallow Break-In Recommendations . . . . . . . . . . . . . . 83 Standing Water . . . . . . . . . . . . . . . . . . . . . . 301 Checking Oil Level . . . . . . . . . . . . . . . . . . . 399 E-85 Fuel .
INDEX 473 Filters Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 403 Air Conditioning . . . . . . . . . . . . . . . . . . 280,406 Automatic Transaxle . . . . . . . . . . . . . . . . . . 422 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . 402,439 Engine Oil Disposal . . . . . . . . . . . . . . . . . . . 402 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372 Hazard Warning . . . . . . . . .
474 INDEX Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 438 Fluid Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Fluid Level Checks Automatic Transaxle . . . . . . . . . . . . . . . 421,422 Brake . . . . . . . . . . . . . . . . . . . . . . . . . . 417,440 Cooling System . . . . . . . . . . . . . . . . . . . . . . 412 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 399 Power Steering . . . . . . . . . . . . . . . . . . . 304,440 Fluids . . . . . . . . .
INDEX Gasoline, Clean Air . . . . . . . . . . . . . . . . . . . . . . 346 Gasoline, Reformulated . . . . . . . . . . . . . . . . . . . 346 Gauges Coolant Temperature . . . . . . . . . . . . . . . . . . 188 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 192 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 192 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . 294 Gear Select Lever Override . . . . .
476 INDEX Hitches Trailer Towing . HomeLink® (Garage Hood Prop . . . . . . Hood Release . . . . ................... Door Opener) Transmitter ................... ................... .. . .. .. . . . . 361 160 146 145 Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ignition Key Removal . . . . . . . . . . . . . . . . . . . . .
INDEX Lane Change and Turn Signals . . . . . . . . . . . 196,436 Lane Change Assist . . . . . . . . . . . . . . . . . . . . . . 149 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . 43 LATCH (Lower Anchors and Tether for CHildren) . . . . . . . 78 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . 346 Leaks, Fluid . . . . . . . . . . . . .
478 INDEX Theft Alarm (Security Alarm) . . . . . . . . . . . . 196 Tire Pressure Monitoring (TPMS) . . . . . . . 198,337 Traction Control . . . . . . . . . . . . . . . . . . . . . 315 Turn Signal . . . . . . . . . . . . . . 87,148,196,435,436 Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 Warning (Instrument Cluster Description) . . . 188 Loading Vehicle . . . . . . . . . . . . . . . . . . . . . . 357,358 Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . 358 Tires . . . .
INDEX MTBE/ETBE . . . . . . . . . . . . . . . . . . . . . . . . . . . 347 New Vehicle Break-In Period . . . . . . . . . . . . . . . . 83 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . 64,68 Occupant Restraints (Sedan) . . . . . . . . . 39,61,62,64,67 Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . . . 346 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . 192,195 Oil Change Indicator . . . . . . . . . . . .
480 INDEX Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . 212 Pets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Phone, Cellular . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Phone, Hands-Free (Uconnect™) . . . . . . . . . . . . . . 97 Placard, Tire and Loading Information . . . . . . . . . 322 Power Deck Lid Release . . . . . . . . . . . . . . . . . . . . . 38 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . 31 Mirrors . . . . . . . . . . .
INDEX Remote Control Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . 20 Security Alarm . . . . . . . . . . . . . . . . . . . . . . . 18 Remote Keyless Entry (RKE) . . . . . . . . . . . . . . . . . 20 Remote Keyless Entry (Sedan) . . . . . . . . . . . . . . . 20 Remote Sound System (Radio) Controls . . . . . . . . 266 Remote Starting System . . . . . . . . . . . . . . . . . . . . 27 Remote Trunk Release . . . . . . . . . . . . . . . . . . . . . 38 Replacement Bulbs . . . . . . . . . . . . . . .
482 INDEX Pretensioners . . . . . . . . . . . . . . . . . . . . . . . . 51 Rear Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . 189 Untwisting Procedure . . . . . . . . . . . . . . . . . . 47 Seat Belts (Sedan) . . . . . . . . . . . . . . . . . . . . . . . . 39 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . 136 Cleaning . . . . . . . . . . . .
INDEX Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288 Engine Fails to Start . . . . . . . . . . . . . . . . . . 289 Starting and Operating . . . . . . . . . . . . . . . . . . . . 288 Starting Procedures . . . . . . . . . . . . . . . . . . . . . . 288 Steering Power . . . . . . . . . . . . . . . . . . . . . . . . . . 303,304 Tilt Column . . . . . . . . . . . . . . . . . . . . . . . . 156 Wheel, Tilt . . . . . . . . . . . . . . . . . . . . . . . . .
484 INDEX Compact Spare . . . . . . . . . . . . . . . . . . . . . . 330 General Information . . . . . . . . . . . . . . . . . . 326 High Speed . . . . . . . . . . . . . . . . . . . . . . . . . 328 Inflation Pressures . . . . . . . . . . . . . . . . . . . . 327 Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . 333 Load Capacity . . . . . . . . . . . . . . . . . . . . 322,323 Pressure Monitor System (TPMS) . . . . . . . . .
INDEX Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 419 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 292 Overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . 296 Selection of Lubricant . . . . . . . . . . . . . . . . . 440 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 Transmitter Battery Service (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . .
486 INDEX Vehicle Theft Alarm (Security Alarm) . . . . . . . . . . 18 Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 425 Viscosity, Engine Oil . . . . . . . . . . . . . . . . . . . . . . 401 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 37,169 Voice Recognition System (VR) . . . . . . . . . . . . . . 127 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 280 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Power . . . . . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 11C41-126-AF Sixth Edition Printed in U.S.A.
