User Guide

• Block both the front and rear of the wheel

diagonally opposite of the jacking position.

For example, if changing the right front tire,

block the left rear wheel.

NOTE: Passengers should not remain in the

vehicle when the vehicle is being jacked.

Jacking And Tire Changing Instructions

• Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack

screw counterclockwise to loosen the lug wrench, and remove the wrench from the jack

assembly.

NOTE: The jack handle attaches to the side of the jack with two attachment points. When the jack

is partially expanded, the tension between the two attachment points holds the jack handle in place.

• Loosen (but do not remove) the wheel lug nuts by turning them counterclockwise one turn

while the wheel is still on the ground.

• Assemble the jack and jacking tools. Connect the jack handle driver to the extension, then to

the lug wrench.

WHAT TO DO IN EMERGENCIES