2011 200 2011 OWNER’S MANUAL Chrysler Group LLC 11C41-126-AA First Edition 200 CONVERTIBLE Printed in U.S.A. 291697.ps 11C41-126-AA Chrysler 1" gutter 09/17/2010 16:27:50 2011 200 2011 OWNER’S MANUAL Chrysler Group LLC 11C41-126-AA First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents.
INTRODUCTION 5
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 18 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ To Disarm The System . . . . . . . . . . . . . . . . . 19 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . 14 䡵 Illuminated Entry — If Equipped . . . . . . . . . . . 20 䡵 Sentry Key威 . . . . . . . . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Remote Open Window Feature — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 25 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 25 ▫ Programming Additional Transmitters . . . . . . 25 ▫ Battery Replacement . . . . . . . . . . . . . . . . . . . 25 ▫ General Information . . . . . . . . . . . . . . . . . . . 26 䡵 Remote Starting System — If Equipped . . . . . . . 27 ▫ How To Use Remote Start . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Enhanced Seat Belt Use Reminder System (BeltAlert威) . . . . . . . . . . . . . . . . . . . . . . . . . 54 ▫ BeltAlert威 Programming . . . . . . . . . . . . . . . . 54 ▫ Seat Belts And Pregnant Women . . . . . . . . . . 55 ▫ Seat Belt Extender . . . . . . . . . . . . . . . . . . . . . 55 ▫ Supplemental Restraint System (SRS) — Air Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 ▫ Air Bag Deployment Sensors And Controls . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dealer for these numbers and keep them in a safe place. You can insert the double-sided keys into the locks with either side up. Vehicle Key Ignition Key Removal Place the shift lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to warn you that this safety feature is inoperable. The engine can be started and stopped, but the key cannot be removed until you obtain service.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The time for this feature is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/ Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 The system uses ignition keys, which have an embedded electronic chip (transponder), to prevent unauthorized vehicle operation. Therefore, only keys that are programmed to the vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if someone uses an invalid key to start the engine. an invalid key to start the engine. Either of these conditions will result in the engine being shut off after two seconds.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! The Sentry Key威 Immobilizer system is not compatible with some after-market remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. authorized dealer or by using the Customer Key Programming procedure. This procedure consists of programming a blank key to the vehicle electronics. A blank key is one which has never been programmed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After ten seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. 17 Repeat this procedure to program up to eight keys. If you do not have a programmed Sentry Key威 contact your authorized dealer for details.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE VEHICLE SECURITY ALARM — IF EQUIPPED The Vehicle Security Alarm monitors the doors and trunk for unauthorized entry and ignition switch for unauthorized operation. While the Vehicle Security Alarm is armed, interior switches for door locks and decklid release are disabled. To Arm The System 1. Remove the keys from the ignition switch and get out of the vehicle. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 NOTE: • The Vehicle Security Alarm remains armed during • During the 16-second arming period, if a door is trunk entry. Pressing the trunk button will not disarm opened or the ignition switch is turned to ON/RUN, the Vehicle Security Alarm. If someone enters the the Vehicle Security Alarm will automatically disarm. vehicle through the trunk and opens any door, the alarm will sound.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Tamper Alert If the alarm was triggered, but the warning signals have • The front courtesy overhead console and door courtimed out, the park and taillights flash three times, and tesy lights do not turn on if the dimmer control is in the horn will chirp three times, when unlocking the the ⬙Dome ON⬙ position (extreme top position). vehicle with a valid RKE transmitter to alert the driver.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • Inserting the key into the ignition switch disables all To Unlock The Doors Press and release the UNLOCK button on the RKE buttons on the RKE transmitter. transmitter once to unlock the driver’s door or twice to unlock both doors. The turn signal lights will flash to acknowledge the unlock signal. The Illuminated Entry system (if equipped) will also turn on.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the inside the vehicle will activate the Vehicle Security Alarm following procedure: System. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the UN1. Press and hold the LOCK button on a programmed LOCK button to deactivate the Vehicle Security Alarm RKE transmitter for at least four seconds, but not longer System. than 10 seconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the Opening a door with the Vehicle Security Alarm actifollowing procedure: vated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm System. 1. Press and hold the UNLOCK button on a programmed RKE transmitter for at least four seconds, but not longer Illuminated Approach — If Equipped than 10 seconds.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn With Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. This feature can be turned on or off. To change the current setting, proceed as follows: • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 The Panic Alarm will stay on for three minutes unless To Unlatch The Trunk Press the TRUNK button on the RKE transmitter two you turn it off by pressing the PANIC button a second time or if the vehicle speed is 5 mph (8 km/h) or greater. times to unlatch the trunk. Remote Open Window Feature — If Equipped This feature allows you to remotely lower both door and rear quarter windows at the same time.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not touch the battery terminals that are on the back 2. Remove and replace the battery. Avoid touching the housing or the printed circuit board. new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with 1. With the RKE transmitter buttons facing down, use a rubbing alcohol. flat blade tool to pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If your RKE transmitter fails to operate from a normal • Obstructions between the vehicle and the Key Fob distance, check for these two conditions: may reduce this range. 1. Weak battery in the RKE transmitter. The expected life How To Use Remote Start All of the following conditions must be met before the of a battery is five years. engine will remote start: 2.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • System not disabled from previous remote start event Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped • Vehicle theft alarm not active The following messages will display in the EVIC if the vehicle fails to remote start or exits remote start premaWARNING! turely: • Do not start or run an engine in a closed garage or • Remote Start Aborted — Door Ajar confined area.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode Press and release the REMOTE START button on the RKE transmitter twice within five seconds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: To avoid unintentional shut downs, the system will disable the one-time press of the remote start button for two seconds after receiving a valid remote start request. To Exit Remote Start Mode And Drive The Vehicle Before the end of the 15 minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Door Locks — If Equipped When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The Automatic Door Locks feature can be enabled or disabled by your authorized dealer. See your authorized dealer for programming. 6. The vehicle speed is 0 mph (0 km/h).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 3. Press the power door UNLOCK switch to unlock the doors. 4. A single chime will indicate the completion of the programming. 2 NOTE: This feature will not be functional until the vehicle has been driven and the shift lever returned to the PARK position. 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • If a fluttering noise is heard from the rear seat belts while driving with the windows down, safely bring the vehicle to a stop and buckle the rear seat belts over the empty seats. This will keep tension on the seat belts and remove the fluttering condition. WARNING! Never leave children in a vehicle, with the keys in the ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 will remain active for 45 seconds after the ignition switch 1. Lowering all four windows to the full open position. is turned to the LOCK position. Opening either door will 2. Press and hold the Power Top Switch in the Close cancel this feature. direction. Once the Power Top becomes fully closed, all For vehicles equipped with EVIC, the power window four windows will start closing. switches will remain active for up to 10 minutes after the 3.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE window control, press and release the window LOCK Wind Buffeting Wind buffeting can be described as the perception of button again (setting it in the up position). pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with one window down in certain open or partially open positions. This is a normal occurrence and can be minimized.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The trunk release button on the dash will be disabled if the vehicle is locked by pressing the power door lock switch or by pressing the LOCK button on the Remote Keyless Entry (RKE) transmitter. The trunk release button will be enabled when the veTrunk Release hicle is unlocked by the RKE or if the Button key is inserted into the ignition and turned to ON/RUN or START.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE TRUNK SAFETY WARNING WARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in the trunk, children can die from suffocation or heat stroke.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Advanced Front Air Bags for driver and front passenger 39 all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat • Supplemental Active Head Restraints (AHR) located on top of the front seats (integrated into the head Please pay close attention to the information in this section.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the ride properly buckled up in the rear seat. Never allow risk of harm from a deploying air bag: children to slide the shoulder belt behind them or under their arm. 1. Children 12 years old and under should always ride buckled up in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between you and the door. 5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under ⴖIf You Need Assistanceⴖ. WARNING! • Relying on the air bags alone could lead to more severe injuries in a collision.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Buckle up even though you are an excellent driver, even normal conditions. However, in an accident, the belt will on short trips. Someone on the road may be a poor driver lock and reduce the risk of you striking the inside of the and cause an accident that includes you. This can happen vehicle or being thrown out. far away from home or on your own street.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Wearing your belt in the wrong place could make your injuries in an accident much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too. • Two people should never be belted into a single seat belt. People belted together can crash into one another in an accident, hurting one another badly.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in an accident, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during an accident.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in an accident. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt will not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Position the latch plate as close as possible to the anchor point. Driver N/A ALR Center N/A N/A 47 Passenger ALR ALR First Row 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, Second Row grasp and twist the belt webbing 180° to create a fold that • N/A — Not Applicable begins immediately above the latch plate. • ALR — Automatic Locking Retractor 3. Slide the latch plate upward over the folded webbing.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically prelocked. The belt will still retract to remove any slack in the shoulder belt. The Automatic Locking Mode is available on all passenger-seating positions with a combination lap/shoulder belt. Use the Automatic Locking Mode anytime a child safety seat is installed in a seating position that has a belt with this feature.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Energy Management Feature This vehicle has a safety belt system with an Energy Management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on accident. This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner. This feature is designed to help reduce the belt force acting on the occupant’s chest.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Active Head Restraints (AHR) — If Equipped These head restraints are passive, deployable components, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspection of the head restraint. The head restraint will be split in two halves, with the front half being soft foam and trim, the back half being decorative plastic.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 CAUTION! All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident. NOTE: For more information on properly adjusting and positioning the head restraint, refer to “Adjusting Active Head Restraints” in “Understanding The Features Of Your Vehicle”.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 2. Position the hands on the top of the deployed AHR at a comfortable position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 2 3 — Final Downward Movement To Engage Locking Mechanism AHR In Reset Position 4. The AHR front soft foam and trim half should lock NOTE: • If you have difficulties or problems resetting the into the back decorative plastic half. Active Head Restraints, see an authorized dealer. • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System (BeltAlert姞) BeltAlert威 is a feature intended to remind the driver to fasten their seatbelt. This feature is active whenever the ignition is on. If the driver is unbelted, the Seat Belt Reminder Light will turn on and remain on until the driver seatbelt is fastened.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 2. Turn the ignition switch to the ON/RUN position (do Seat Belts And Pregnant Women not start the engine), and wait for the Seat Belt Reminder We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is Light to turn off. the best way to keep the baby safe. 3. Unbuckle and then re-buckle the driver’s seat belt three times, ending with the seat belt buckled.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Using a seat belt extender when not needed can increase the risk of injury in an accident. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 The Advanced Front Air Bags have a multistage inflator NOTE: design. This allows the air bag to have different rates of • Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. inflation that are based on the severity and type of collision. • After any accident, the vehicle should be taken to an authorized dealer immediately.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Seat-Mounted Side Air Bags (SAB) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat Track Position Sensors • Supplemental Active Head Restraint for Driver and Front Passenger Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Seat-Mounted Side Air Bags (SAB) Supplemental Seat-Mounted Side Air Bags may provide enhanced protection to help protect an occupant during a side impact. The Supplemental Seat-Mounted Side Air Bag is marked with an air bag label sewn into the outboard side of the front seats. 59 When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front Air Bags work with the knee bolsters to provide improved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection. Air Bag Deployment Sensors And Controls Advanced Front Air Bags are designed to provide additional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Also, the ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Air Bag Warning Light will turn off.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating SAB exits through the seat seam into the space between the occupant and the door. The SAB fully inflate in about 10 milliseconds.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you do have a collision, which deploys the air bags, any or all of the following may occur: throat irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instructions for cleaning. • The nylon air bag material may sometimes cause abrasions and/or skin reddening to the driver and front passenger as the air bags deploy and unfold.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Air Bag System 65 WARNING! (Continued) WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light You will want to have the air bags ready to inflate for your protection in a collision. The Air Bag Warning Light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components. While the air bag system is designed to be maintenance free. If any of the following occurs, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Whether or not the driver and passenger safety belts To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the child’s size.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Rearward-facing child seats must never be used in the front seat of a vehicle with a front passenger air bag. An air bag deployment could cause severe injury or death to infants in this position. Older Children And Child Restraints Children who weigh more than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. WARNING! (Continued) • A rearward-facing child restraint should only be used in a rear seat. A rearward-facing child restraint in the front seat may be struck by a deploying passenger air bag, which may cause severe or fatal injury to the infant.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE you make sure that you can install the child restraint in the vehicle where you will use it, before you buy it. • The restraint must be appropriate for your child’s weight and height. Check the label on the restraint for weight and height limits. 71 WARNING! When your child restraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Do not leave it loose in the vehicle.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH-compatible child restraints in adjacent rear seating positions, you can use the LATCH anchors or the vehicle’s seat belts. If your child restraints are not LATCH-compatible, you can only install the child restraints using the vehicle’s seat belts. For typical installation instructions, refer to “Installing The LATCHCompatible Child Restraint System”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 have tether straps, and you are urged to take advantage Installing The LATCH-Compatible Child Restraint of all of the available attachments provided with your System We urge you to carefully follow the directions of the child restraint in any vehicle. manufacturer when installing your child restraint. Not all NOTE: When using the LATCH attaching system to child restraint systems will be installed as described here.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE tether anchors are underneath access covers in the carpet the access cover on the carpet covering the back of the covering the back of the seat where you see this symbol. seat and attach the tether strap hook to the anchor. Be careful to route the tether strap to provide the most direct Many, but not all, restraint systems will be equipped with path between the anchor and the child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Remind all children in the vehicle that the seat belts are seat belts are designed to keep the lap portion of the seat not toys and should not be played with, and never leave belt tight around the child restraint so that it is not your child unattended in the vehicle. necessary to use a locking clip. The ALR will make a ratcheting noise if you extract the entire belt from the WARNING! retractor and then allow the belt to retract into the retractor.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing a Child Restraint with an ALR: several times to shorten it. Insert the latch plate into the buckle with the release button facing out. 1. To install a child restraint with ALR, first, pull enough of the seat belt webbing from the retractor to route it • If the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, disconnect through the belt path of the child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 4. Open the access cover (C) on the carpet covering the back of the seat and attach the tether strap hook (D) to the anchor. 2 Child Tether Access Port Cover 3. Push the tether strap and hook (B) through the access port and down into the trunk. Child Tether Anchor NOTE: Route the tether strap to provide the most direct 5. Remove slack in the tether strap according to the child path from the child seat to the anchor. restraint manufacturer’s instructions.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Transporting Pets Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in an accident.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of difficulty. SAFETY TIPS Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 a collision if they have been damaged (i.e., bent retractor, Floor Mat Safety Information torn webbing, etc.). If there is any question regarding belt Always use floor mats designed to fit the footwell of your vehicle. Use only floor mats that leave the pedal area or retractor condition, replace the belt.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle. • Never put floor mats or other floor coverings on top of already installed floor mats. Additional floor mats and other coverings will reduce the size of the pedal area and interfere with the pedals.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Periodic Safety Checks You Should Make Outside The Vehicle Door Latches Check for positive closing, latching, and locking. Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Convertible Top Operation . . . . . . . . . . . . . . . . 89 ▫ Power Convertible Top Usage Precautions . . . . 90 ▫ Cargo Shield . . . . . . . . . . . . . . . . . . . . . . . . 94 ▫ Power Convertible Top Controls . . . . . . . . . . . 96 ▫ Lowering The Power Convertible Top . . . . . . . 96 ▫ Raising The Power Convertible Top . . . . . . . . 97 ▫ Wind Stop — If Equipped . . . . . . . . . . . . . . .
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Uconnect™ Phone — If Equipped . . . . . . . . . . . 111 䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . 113 ▫ Power Seats . . . . . . . . . . . . . . . . . . . . . . . . 147 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . 120 ▫ Heated Seats — If Equipped . . . . . . . . . . . . 148 ▫ Uconnect™ Phone Features . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Headlights With Wipers (Available With 䡵 Windshield Wipers And Washers . . . . . Automatic Headlights Only) . . . . . . . . . . . . 159 ▫ Intermittent Wiper System . . . . . . . . . ▫ Headlight Time Delay — If Equipped . . . . . . 159 ▫ Mist Feature . . . . . . . . . . . . . . . . . . . ▫ Instrument Panel Dimmer . . . . . . . . . . . . . . 160 ▫ Headlights With Wipers ▫ Fog Lights — If Equipped . . . . . . . . . . . . . .
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Accelerate For Passing . . . . . . . . . . . . . . 171 䡵 Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . . 182 䡵 Garage Door Opener — If Equipped . . . . . . . . 172 ▫ Front Seat Cupholder . . . . . . . . . . . . . . . . . 182 ▫ Programming HomeLink威 . . . . . . . . . . . . . . 173 ▫ Rear Seat Cupholders . . . . . . . . . . . . . . . . . 182 ▫ Gate Operator/Canadian Programming . . . . 176 䡵 Storage . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONVERTIBLE TOP OPERATION CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: • Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force water past the weather strips. • Remove any standing water from the top and dry the surface before opening it.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When operating the power convertible top, the trunk lid Power Convertible Top Usage Precautions will pivot at the rear of the vehicle, swing open by the NOTE: rear window, and then pivot backward. This allows room • The convertible top will not operate unless the vehicle for the top to retract into or unfold from its stowage area is stationary, the cargo shield is positioned correctly, in the trunk. and the trunk lid is closed and latched.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Opening and closing the top consecutively without the engine running may run the battery down. • If a fluttering noise is heard from the rear seat belts while driving with the top down, safely bring the vehicle to a stop and buckle the rear seat belts over the empty seats. This will keep tension on the seat belts and remove the fluttering condition. CAUTION! • Correctly position the cargo shield in the trunk before stowing the top.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) CAUTION! • Never attempt to lower a frozen convertible top. Wait until the top is thawed before lowering it into the stowage compartment. Lowering a cloth top at temperatures below 32°F (0°C) should be avoided. • Make sure the convertible top is dry before lowering it into the stowage compartment. Lowering the top when damp, wet, or dirty can cause stains, mildew, and damage to the inside of your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Always close the top when leaving your vehicle so as not to leave the interior exposed to potentially damaging outdoor conditions. • Do not leave the top lowered for several weeks at a time. Close it occasionally to prevent discoloration in the folds of the fabric and to allow the creases to smooth out. This is especially important if the top was stowed when not completely dry.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • When using the power top switch on the instrument panel, if potential danger exists while lowering the top, release the switch immediately to interrupt the operation. • When using the power top switch on the instrument panel, if potential danger exists while raising the top, release the switch immediately to interrupt the operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 forward onto the horizontal panel, then grasp both panels and lift them to the forward, upright position in the trunk. 3 Cargo Shield Positioning The Cargo Shield For Cargo Storage To maximize the storage space in the trunk, the cargo shield can be stowed in the forward portion of the trunk.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Convertible Top Controls Lowering the Power Convertible Top The power top switch is located on the front of the center Using The Power Top Switch console. NOTE: The power top switch will operate when the There is also a power top button on the Remote Keyless ignition switch is turned to the ON or ACC position and Entry (RKE) transmitter for remotely lowering the power when in the power accessory delay. convertible top.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using The Remote Keyless Entry Transmitter 97 Raising The Power Convertible Top NOTE: Steps 1 – 3 must be performed within five Using The Power Top Switch seconds. NOTE: The power top switch will operate when the 1. Press and release the UNLOCK button on the RKE ignition switch is turned to the ON or ACC position and when in the power accessory delay. transmitter.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manually Closing the power convertible top manually is a complicated and physically demanding procedure, and it requires a special tool to do so. In the event that you experience a malfunction when operating the power convertible top: Wind Stop — If Equipped The Wind Stop installs in the backseat area of the vehicle. The Wind Stop will not interfere with power top operation. Therefore, it can remain installed when the top is up.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 NOTE: The frames must lie flat on each other in order to 4. Pivot the small frame (1) away from the large frame (2) snap them together. until the pivot lock (3) engages to lock the two frames in an L shape.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Unfold both stems at the rear of the large frame. 6. Align and insert the stems into the slot in each trim panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 7. Align the pins at the front of the large frame with the Removing And Storing The Wind Stop hole in each trim panel. Slide the pins outward until fully Reverse the installation procedure to remove, fold, and store the Wind Stop. However, note the following before extended into each hole. doing so: Disengage the pivot lock (1) to fold the small frame flat onto the large frame. Disengage the frame lock (2) to disconnect the small frame from the large frame.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Convertible Top Operation And Warning Messages When the appropriate conditions exist, the PTCM displays various power convertible top operation and warning messages in the Electronic Vehicle Information Center (EVIC) – if equipped, or in the Odometer for vehicles not equipped with the EVIC.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC EVIC Message〫 Message Display Time〫 SECURE CARGO SHIELD 9 sec. CONVERT- Until OpIBLE TOP eration is NOT SEComplete CURED Odometer Message (< 5 mph [8 km/h]) 〫〫 SET CARGO SHIELD Odometer Message Display Time〫〫 TOP nOT SECUrE Until Operation is Complete Display Scrolls for 9 sec.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC EVIC Message〫 Message Display Time〫 SPEED 9 sec. TOO HIGH TRUNK AJAR Continuous Odometer Message (< 5 mph [8 km/h]) 〫〫 SPEED TOO HIGH Odometer Message Display Time〫〫 DECK Continuous Display Scrolls for 9 sec. Odometer Message (> 5 mph [8 km/h]) 〫〫 TOP DECK Odometer Chime Message Display Time〫〫 Condition Operator Action Required 6 sec. Single Chime The Top Will Not Operate Unless the Vehicle is Stationary.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC EVIC Message〫 Message Display Time〫 CONVERTIBLE TOP MALFUNCTION CONVERTIBLE TOP MALFUNCTION 6 sec. Until Fault is No Longer Detected or Repaired Odometer Message (< 5 mph [8 km/h]) 〫〫 TOP FAIL Odometer Message Display Time〫〫 Display Scrolls for 6 Seconds Odometer Message (> 5 mph [8 km/h]) 〫〫 TOP TOP FAIL Display TOP Scrolls until Fault is No Longer Detected or Repaired 〫 If so equipped. 〫〫 For vehicles not equipped with the EVIC.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 〫〫〫 The PTCM will lockout the power convertible top system if the vehicle charging system is malfunctioning, or the battery is run down, or the hydraulic pump is overheating. In addition, the system prohibits lowering the top when ambient temperature is at 0°F (-18°C) or lower and raising the top when ambient temperature is below -40°F (-40°C).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Bypass Mode (To Raise The Top Only) This procedure is only to be used to raise the top when the top cannot be returned to the UP (raised) position by pressing the POWER TOP switch or is in a position in which the vehicle cannot be driven. Please follow these emergency bypass instructions to return the top to the UP (raised) position.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors To receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. Power Mirrors The power mirror switch is located on the driver’s door trim. A rotary knob selects the left mirror, right mirror or off position. NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting a mirror, move the knob in the same Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This direction you want the mirror to move. When finished, feature is activated whenever you turn on the rear return the knob to the center “O” (Off) position to guard window defroster. Refer to “Rear Window Features” in against accidentally moving a mirror position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect™ Phone. NOTE: The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth威 “Hands-Free Profile”, Version 0.96 or higher. See the Uconnect™ website for supported phones. For Uconnect™ customer support, visit the following websites: • www.chrysler.com/uconnect Vanity Mirror • www.dodge.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect™ Phone is driven through your Bluetooth威 “Hands-Free Profile” mobile phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Voice Command Button Actual button location may vary with the radio. The individual buttons are described in the “Operation” section. Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice command “Phonebook New Entry”, or you can break the compound form command into two voice commands: “Phonebook” and “New Entry”. Please remember, the Uconnect™ Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, after the beep, say “Pair a Device” and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. 115 phone to use if multiple mobile phones are in the vehicle at the same time.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios. may appear in the display of certain radios. Call By Saying A Name Add Names To Your Uconnect™ Phonebook • Press the NOTE: Adding names to the Uconnect™ Phonebook is recommended when the vehicle is not in motion. button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • When prompted, enter the number designation (e.g., “Home”, “Work”, “Mobile”, or “Other”). This will allow you to store multiple numbers for each phonebook entry, if desired. Phonebook Download – Automatic Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect™ Phone automatically downloads names (text names) and number entries from your mobile phone’s • When prompted, recite the phone number for the phonebook.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Edit Uconnect™ Phonebook Entries loaded, there may be a short delay before the latest NOTE: downloaded names can be used. Until then, if avail• Editing names in the phonebook is recommended able, the previously downloaded phonebook is availwhen the vehicle is not in motion. able for use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 After you are finished editing an entry in the phonebook, • After you enter the Phonebook Delete menu, you will you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete. You can either say the name of a phonebook to the main menu.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete/Erase “All” Uconnect™ Phonebook Entries • Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook Erase All”. • After the “Ready” prompt and the following beep, say “Phonebook List Names”. • The Uconnect™ Phone will play the names of all the phonebook entries, including the downloaded phonebook entries, if available.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Uconnect™ Phone. Check with your mobile service provider for the features that you have.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place/Retrieve A Call From Hold To put a call on hold, press the button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the button until you hear a single beep. Three-Way Calling To initiate three-way calling, press the button while a call is in progress, and make a second phone call, as described under “Making a Second Call While Current Call is in Progress”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 • After the “Ready” prompt and the following beep, say • After the ignition key is switched to OFF, a call can “Redial”. continue on the Uconnect™ Phone for a certain duration, after which the call is automatically transferred • The Uconnect™ Phone will call the last number that from the Uconnect™ Phone to the mobile phone. was dialed from your mobile phone.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting one of the languages, all prompts and • After the “Ready” prompt and the following beep, say voice commands will be in that language. “Emergency” and the Uconnect™ Phone will instruct the paired mobile phone to call the emergency numNOTE: After every Uconnect™ Phone language change ber. This feature is supported in the U.S., Canada, and operation, only the language-specific 32-name phoneMexico. book is usable.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To use your Uconnect™ Phone System in an emergency, your mobile phone must be: • turned on, • paired to the Uconnect™ System, • and have network coverage. 125 Mexico City in Mexico). Please refer to the 24-Hour “Towing Assistance” coverage details on the DVD in the Warranty Information Booklet and the 24-Hour Towing Assistance references. • If supported, this number may be programmable on some systems.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE is also to be used for navigating through an automated Working With Automated Systems This method is used in instances where one generally has customer service center menu structure, and to leave a to press numbers on the mobile phone keypad while number on a pager. navigating through an automated telephone system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Barge In — Overriding Prompts The “Voice Command” button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “Would you like to pair a phone, clear a...,” you button and say, “Pair a Phone” to could press the select that option without having to listen to the rest of the voice prompt.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect™ Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio. • Following the beep, say “Mute off”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Uconnect™ Phone System, follow the instructions de- Select Another Mobile Phone This feature allows you to select and start using another scribed in your mobile phone User’s Manual. phone paired with the Uconnect™ Phone. List Paired Mobile Phone Names • Press the button to begin. button to begin.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say Phone Voice Training feature may be used. To enter this training mode, follow one of the two following proce“Setup Phone Pairing”. dures: • At the next prompt, say “Delete” and follow the From outside the Uconnect™ Phone mode (e.g., from prompts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 This procedure may be repeated with a new user. The • Speak normally, without pausing, just as you would system will adapt to the last trained voice only. speak to a person sitting a few feet/meters away from you. Reset • Make sure that no one other than you is speaking button. • press the during a Voice Command period. • After the “Ready” prompt, and the following beep, say • Performance is maximized under: “Setup”, then “Reset”.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When navigating through an automated system such • In a convertible vehicle, system performance may be as voice mail, or when sending a page, at the end of compromised with the convertible top down. speaking the digit string, make sure to say “Send”. Far End Audio Performance • Storing names in the phonebook when the vehicle is • Audio quality is maximized under: not in motion is recommended.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • Performance, such as audio clarity, echo, and loudness Read Messages: to a large degree rely on the phone and network, and If you receive a new text message while your phone is connected to Uconnect™ Phone, an announcement will not the Uconnect™ Phone. be made to notify you that you have a new text message. • Echo at the phone far end can sometimes be reduced If you wish to hear the new message: by lowering the in-vehicle audio volume. • Press the button.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List of Preset Messages: Send Messages: You can send messages using Uconnect™ Phone. To send 1. Yes a new message: 2. No • Press the button. 3. Where are you? • After the “Ready” prompt and the following beep, say 4. I need more direction. “SMS Send” or “Send Message.” • You can either say the message you wish to send or say 5. L O L “List Messages.” There are 20 preset messages. 6. Why button while the To send a message, press the 7.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 13. I’ll be late 14. Are you there yet? 15. Where are we meeting? 16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 135 • After the “Ready” prompt and the following beep, say “Setup, SMS Incoming Message Announcement,” you will then be given a choice to change it. Bluetooth威 Communication Link Mobile phones have been found to lose connection to the Uconnect™ Phone.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 3
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) 139 Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 3
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no other pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winbutton, listen dows are closed, and the heater/air conditioning fan is options, press the Voice Command set to low. for the beep, and say your command. button while the Pressing the Voice Command system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 2. Say a command (e.g., “Help”). Radio AM To switch to the AM band, say “AM” or “Radio AM”. In 3. Use the ON/OFF VOLUME rotary knob to adjust the this mode, you may say the following commands: volume to a comfortable level while the Voice Command system is speaking. Please note the volume setting for • “Frequency #” (to change the frequency) Voice Command is different than the audio system.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Disc To switch to the disc mode, say “Disc”. In this mode, you may say the following commands: Satellite Radio • “Track” (#) (to change the track) To switch to satellite radio mode, say “Sat” or “Satellite Radio”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE − “Continue” (to continue recording) • “Switch to system setup” − “Delete” (to delete the recording) • “Change to setup” 145 • “Play Memos” (to play previously recorded memos) • “Main menu setup” or — During the playback you may press the Voice • “Switch to setup” button to stop playing memos.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect™ vehicle. Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seats The power seat switch is on the outboard side of the seat near the floor. Use the switch to move the seat up, down, forward, rearward, or to tilt the seat. 147 Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position is reached.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE If HIGH-level heating is selected, the system automatically switches to LOW-level heating and turns one indicator light OFF after a maximum of 60 minutes of continuous operation. It will turn the heater and the remaining indicator light OFF after a maximum of 45 minutes of continuous operation. If LOW-level heating is selected, the system automatically turns the heater and the indicator light OFF after a maximum of 45 minutes of continuous operation.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then lean back to the position desired and release the lever. To return the seatback to its normal upright position, lean forward and lift the lever. Release the lever once the seatback is in the upright position. Seatback Adjustment WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Easy Entry System The Easy Entry lever is located on upper seat belt anchor cover. 3 Lumbar Support Easy Entry Lever Pull the lever upward to move the seat and seatback forward.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When returning the seat to its normal position, the memory feature restores the seat position and seatback recline position to their current settings. On the driver seat, pull the lever upward to move the seatback forward. When returning the seatback to its normal position the memory feature restores the seatback recline position to its current setting.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 3 Push Button For comfort the Active Head Restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull outward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of a collision and could result in serious injury or death. • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Move to the outside of the vehicle and lift the secondary latch underneath the center front edge of the hood and raise the hood. Hood Prop Rod Hole Location Before closing the hood, make sure to stow the prop rod in its proper location. Hood Safety Catch Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. 157 lights, turn signal lights, instrument panel lights, instrument panel light dimming, interior lights and fog lights (if equipped). 3 WARNING! Be sure the hood is fully latched before driving your vehicle.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights And Parking Lights Turn the end of the multifunction lever to the first detent for parking light operation. Turn the end of the lever to the second detent for headlight operation. Lights-On Reminder If the headlights or parking lights are on after the ignition is turned to the LOCK position, a chime will sound to alert the driver when the driver’s door is opened.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights With Wipers (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the parking lights or headlights are on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Daytime Running Lights — If Equipped The high beam headlights will turn on as Daytime Running Lights (DRL) and operate at lower intensity whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is released and the shift lever is in any position except PARK. NOTE: The Daytime Running Lights will turn off automatically when a turn signal is in operation and turn on again when the turn signal is not operating.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Lights Two courtesy/reading lights are located in the bottom of the rearview mirror. You can turn these lights on and off from the switches in the mirror or from the dimmer control in the multifunction lever. These lights are also controlled automatically by the Illuminated Entry System. Courtesy/Reading Light Switches 163 A courtesy light is also found in the rear of the center console.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer control lever is located on the right side of the steering column. Changing Wiper Speeds NOTE: The wipers will automatically return to the “Park” position if you turn the ignition switch OFF while they are operating.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with defroster before and during windshield washer use. NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights With Wipers (Available With Auto Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever (on the left side of the steering column) is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column. To unlock the steering column, push the lever downward. To tilt the steering column, move the steering wheel upward or downward as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE System can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button vehicle set speed. and release. Release the accelerator and the vehicle will To Activate operate at the selected speed. Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 decrease until the button is released. Release the button To Resume Speed To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release. Resume can be used at any speed will be established. above 20 mph (32 km/h). Pressing the SET (-) button once will result in a 1 mph (2 km/h) decrease in set speed.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so The HomeLink威 buttons that are located in the headliner it may be preferable to drive without Electronic Speed or sun visor designate the three different HomeLink威 Control. channels. WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Your motorized door or gate will open and close while you are training the universal transceiver. Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place the handheld transmitter 1 to 3 in (3 to 8 cm) away • After training a HomeLink威 channel, if the garage from the HomeLink威 button you wish to program while door does not operate with HomeLink威 and the gakeeping the indicator light in view. rage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 This can usually be found where the hanging antenna 6. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor. It is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer. door. NOTE: You have 30 seconds in which to initiate the next step after the LEARN button has been pressed. 7.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming Canadian radio frequency laws require transmitter signals to time-out (or quit) after several seconds of transmission – which may not be long enough for HomeLink威 to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to time-out in the same manner. transmitter every two seconds until HomeLink威 has successfully accepted the frequency signal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 The HomeLink威 Universal Transceiver is disabled when Reprogramming A Single HomeLink姞 Button To reprogram a channel that has been previously trained, the Vehicle Security Alarm is active. follow these steps: Troubleshooting Tips If you are having trouble programming HomeLink威, here 1. Turn the ignition switch to the ON/RUN position. are some of the most common solutions: 2.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. ELECTRICAL POWER OUTLETS There are two 12 Volt (13 Amp) electrical power outlets on this vehicle. Both of the power outlets are protected by a fuse. NOTE: Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 3 Instrument Panel Power Outlet The center console power outlet is powered directly from the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Seat Cupholder The cupholder in the center console will accommodate either two large size cups or two 20 oz. (.5 L) bottles or cans. The one-piece insert can be removed easily for cleaning. An optional removable ashtray may be located in one of the cupholders. Rear Seat Cupholders Cupholders for the rear seat occupants are located in the armrests. Each cupholder is capable of holding up to a 20 oz. (.5 L) bottle or can.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 WARNING! If containers of hot liquid are place in the cupholder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury. 3 STORAGE Glove Box Storage Compartment The glove box storage compartment is located on the right side of the instrument panel. To open the glove box, pull outward on the latch handle located on the front of Glove Box Storage Compartment the glove box.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE is also equipped with an electrical power outlet. Refer to “Power Outlets” in “Understanding The Feature of Your Vehicle” for further information. Center Console Storage The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also conCenter Console Two separate storage compartments are also located tains a 12 Volt power outlet.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 NOTE: • A notch in the front of the console base allows for use of a cellular phone while it is plugged into the power outlet with the armrest latched down. CARGO AREA FEATURES The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous projectile in a sudden stop or collision. Ski Pass-Through There is a ski pass-through door located behind the rear seat armrest that allows longer items, such as snow skis, to be stored in the rear cargo area. Lower the armrest and pull downward on the latch to open the ski pass-through door.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 10 minutes. For an additional five minutes of operation, press the button a second time.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 192 ▫ Trip Functions . . . . . . . . . . . . . . . . . . . . . . 214 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 193 ▫ Compass Display . . . . . . . . . . . . . . . . . . . . 216 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 194 ▫ Personal Settings (Customer-Programmable Features) . . . . . . . 218 䡵 Mini-Trip Computer — If Equipped . . . . . . . . 208 ▫ Control Buttons .
190 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video) . . . 230 ▫ Notes On Playing MP3/WMA Files . . . . . . . 232 ▫ List Button (Disc Mode For MP3/WMA Play) . . . . . . . . . 235 ▫ Info Button (Disc Mode For MP3/WMA Play) . . . . . . . . . 235 ▫ Uconnect™ Multimedia (Satellite Radio) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . 237 䡵 Media Center 730N/430/430N (RHR/RER/ RBZ/RHB) CD/DVD/HDD/NAV — If Equipped . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 191 ▫ Uconnect™ Multimedia (Satellite Radio) — 䡵 Steering Wheel Audio Controls — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . 262 If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 273 䡵 iPod威/USB/MP3 Control — If Equipped . . . . . 266 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . 274 ▫ Connecting The iPod威 Or External USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 ▫ CD Player . . . . . . . . . . . .
192 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 5 — Air Outlet — Side Window Demister Outlet — Instrument Cluster — Ignition Switch — Analog Clock 6 — Radio 7 — Passenger Airbag 8 — Glove Compartment 9 — Heated Seat Switch – If Equipped 10 — Hazard Switch 11 — Storage Compartment 12 — Climate Control 13 — Trunk Release Button 14 — Power Outlet
UNDERSTANDING YOUR INSTRUMENT PANEL 193 INSTRUMENT CLUSTER 4
194 UNDERSTANDING YOUR INSTRUMENT PANEL removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant temperaas a supplement to the radiator and aids in removing heat ture. Any reading below the red area of the gauge shows from the engine cooling system. that the engine cooling system is operating properly.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 If jump starting is required, refer to “Jump Starting 5. Low Fuel Light When the fuel level drops to approximately 2.0 gal- Procedures” in “What To Do In Emergencies”. lons (7.6 Liters), the fuel symbol will light and a 7. Air Bag Warning Light single chime will sound. This light will turn on for four to eight seconds NOTE: This light will remain on until a minimum of as a bulb check when the ignition switch is first turned to ON/RUN.
196 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to “Occupant 10. Engine Temperature Warning Light Restraints” in “Things To Know Before Starting Your This light warns of an overheated engine condition. As temperatures rise and the gauge apVehicle” for further information. proaches H, this indicator will illuminate and a 9. Oil Pressure Warning Light single chime will sound after reaching a set threshold. This light indicates low engine oil pressure.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 If brake failure is indicated, immediate repair is neces11. Brake Warning Light This light monitors various brake functions, sary. including brake fluid level and parking brake WARNING! application. If the brake light turns on it may indicate that the parking brake is applied, that Driving a vehicle with the brake light on is dangerthe brake fluid level is low, or that there is a problem with ous. Part of the brake system may have failed.
198 UNDERSTANDING YOUR INSTRUMENT PANEL The operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately three seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. 13.
UNDERSTANDING YOUR INSTRUMENT PANEL 199 reading before the repair/service, so that you can be sure Vehicle Odometer Messages that it is properly reset, or that the door jamb sticker is When the appropriate conditions exist, the odometer will accurate if the odometer must be reset at zero. display the following messages: The two trip odometers show individual trip mileage. To door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Door Ajar switch from odometer to trip odometers, press and dECK . .
200 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the instrument cluster is equipped with the optional Electronic Vehicle Information Center (EVIC), then all warnings including ”Low Tire,” “Door Ajar” and “Trunk Ajar” will only display in the EVIC. (Refer to “Electronic Vehicle Information Center (EVIC)” for specific messages). HOTOIL When this message is displayed there is a transmission over-temperature condition.
UNDERSTANDING YOUR INSTRUMENT PANEL 201 the problem continues, the message will appear the next the oil change indicator system (after performing the time the vehicle is started. See your authorized dealer scheduled maintenance) perform the following procedure: service center as soon as possible. 1. Turn the ignition switch to the ON/RUN position CHANgE OIL Your vehicle is equipped with an engine oil change (do not start the engine). indicator system. The “CHAngE OIL” message will flash 2.
202 UNDERSTANDING YOUR INSTRUMENT PANEL 17. Electronic Throttle Control (ETC) Indicator Light 15. Cruise Indicator — If Equipped This indicator shows that the Electronic Speed This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a Control System is ON. problem is detected, the light will come on 16. Odometer/Trip Odometer Reset Button while the engine is running.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 21. Front Fog Light Indicator — If Equipped 18. Park/Headlight ON Indicator — If Equipped This indicator will illuminate when the park This indicator will illuminate when the front fog lights are on. lights or headlights are turned on. 22. Vehicle Security Light — If Equipped This light will flash rapidly for approximately 19. Electronic Stability Control (ESC) OFF Indicator 16 seconds when the alarm system is arming.
204 UNDERSTANDING YOUR INSTRUMENT PANEL the conventional brake system will continue to operate engine running. If the “ESC Activation/Malfunction Innormally provided that the BRAKE warning light is not dicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC on. system.
UNDERSTANDING YOUR INSTRUMENT PANEL • The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive following the maneuver that caused the ESC activation. 205 As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.
206 UNDERSTANDING YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a TPMS CAUTION! malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is The TPMS has been optimized for the original combined with the low tire pressure telltale. When the equipment tires and wheels.
UNDERSTANDING YOUR INSTRUMENT PANEL the bulb does not come on when turning the key from LOCK to ON/RUN, have the condition checked promptly. Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the light after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing.
208 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Continuous driving with the Transmission Temperature Warning Light illuminated will eventually cause severe transmission damage or transmission failure. WARNING! If the Transmission Temperature Warning Light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. 29.
UNDERSTANDING YOUR INSTRUMENT PANEL Control Buttons 209 RESET Button To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel. The following displays can be reset or changed: • Trip A • Trip B Trip Odometer (ODO) This display shows the distance traveled since the last reset. Press and release the STEP button on the instrument cluster to switch from odometer, to Trip A or Trip B.
210 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC consists of the following: ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) – IF EQUIPPED • System Status The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the • Vehicle Information Warning Message Displays instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: 211 Press and release the MENU button to advance the display to Trip Functions or Personal Settings or to return to the default System Status MENU display. Button Press and release the DOWN button to advance the display through the various Trip Functions or Personal Settings.
212 UNDERSTANDING YOUR INSTRUMENT PANEL SELECT Button Press and release the SELECT Button to accept • RKE (Remote Keyless Entry) Battery Low (with a a selection. The SELECT Button also resets single chime) various Trip Functions.
UNDERSTANDING YOUR INSTRUMENT PANEL • Remote start aborted — Fuel low • Remote start disabled — System fault • Convertible Top Not Secured (with a single chime) • Convertible Top Complete (with a single chime) • Secure Cargo Shield (with a single chime) • Speed Too High (with a single chime) • Convertible Top Malfunction (with a single chime) 213 Oil Change Required — If Equipped Your vehicle is equipped with an engine oil change indicator system.
214 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Fully depress the accelerator pedal slowly three times Press and release the DOWN button to advance the display through the Trip Functions. within 10 seconds. 3. Turn the ignition switch to the LOCK position.
UNDERSTANDING YOUR INSTRUMENT PANEL • Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the SELECT button. 215 • Elapsed Time Shows the total elapsed time of travel since the last reset. Elapsed time will increment when the ignition switch is in the ON or START position.
216 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display The compass heading indicates the direction the vehicle is facing. Press and release the compass button to display one of eight COMPASS compass heading and the outside temperature. Button one or more 360° turns (in an area free from large metal or metallic objects) until the CAL indicator in the EVIC turns off. The compass will now function normally.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 4. Press and release the SELECT Button and the CAL indicator will quit flashing. 5. Drive the vehicle slowly, completing one or more circles (in an area free from large metal or metallic objects) until the CAL indicator turns off. The compass will now function normally. Compass Variance Compass Variance is the difference between magnetic North and Geographic North.
218 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press and release the DOWN button until “Compass Press and release the MENU button until “Personal Variance” and the current Variance Value displays in the Settings” displays in the EVIC. EVIC. Press and release the DOWN button to display the 4.
UNDERSTANDING YOUR INSTRUMENT PANEL RKE Unlock When Driver Door 1st Press is selected, only the driver’s door will unlock on the first press of the Remote Keyless Entry (RKE) transmitter UNLOCK button. When Driver Door 1st Press is selected, you must press of the RKE transmitter UNLOCK button twice to unlock the passenger’s doors. When All Doors 1st Press is selected, all of the doors will unlock on the first press of the RKE transmitter UNLOCK button.
220 UNDERSTANDING YOUR INSTRUMENT PANEL off if they were turned on by this feature. To make your Illumin. Approach selection, press the SELECT button until ON or OFF When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are appears. unlocked with the remote keyless entry transmitter. To NOTE: Turning the headlights on during the daytime make your selection, press the SELECT button until causes the instrument panel lights to dim.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Display Units In SETTING THE ANALOG CLOCK The EVIC and odometer can be changed between English and Metric units of measure. To make your selection, press and release the SELECT button until “ENGLISH” or “METRIC” appears. Calibrate Compass Refer to “Compass Display” for more information. 4 Compass Variance Refer to “Compass Display” for more information.
222 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate. Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped With Uconnect Phone” message will display on the radio screen.
224 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure INFO Button Press the INFO button for an RDS station (one with call 1. Press and hold the TIME button until the hours blink. letters displayed). The radio will return a Radio Text 2. Adjust the hours by turning the right side TUNE/ message broadcast from an FM station (FM mode only). SCROLL control knob. RW/FF 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be sePush the rotary TUNE/SCROLL control knob a third lected.
226 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Information Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk 16-Digit Character Display Inform Jazz News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R & B Sports Talk Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will b
UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote control to scroll up and down the menu (if equipped). 227 • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped).
228 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Home Clock - Pressing the SELECT button allows you to set the clock. Turn the TUNE/SCROLL control knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the minutes. Press the TUNE/SCROLL control knob again to save changes. Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc).
UNDERSTANDING YOUR INSTRUMENT PANEL Audio DRC — If Equipped Selecting this item allows you to limit maximum audio dynamic range. The default is set to ⬙High,⬙ and under this setting, dialogues will play at 11 db higher than if the setting is ⬙Normal.⬙ 229 NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective.
230 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton position to operate the radio. with the corresponding number (1-6) where the LOAD Button — Loading Compact Disc(s) CD was loaded and the disc will unload and Press the LOAD button and the pushbutton with the move to the entrance for easy removal.
232 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (CD MODE) Notes On Playing MP3/WMA Files Press the SCAN button to scan through each track on the The radio can play MP3/WMA files; however, acceptable CD currently playing. MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the TIME Button (CD MODE) following restrictions. Press this button to change the display from a large CD playing time display to a small CD playing time display.
UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 233 If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files • Maximum number of characters in file/folder names: named with the *.
234 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48 160, 128, 144, 112, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 WMA Specification Sampling Frequency (kHz) Bit Rate (kbps) 44.1 and 48 48, 64, 96, 128, 160, 192 VBR WMA Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files).
236 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. Operating Instructions — Voice Command System (If Equipped) For the radio, Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details.
UNDERSTANDING YOUR INSTRUMENT PANEL Macrovision This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. 237 Radio.
238 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Serial Number/Sirius Identification Selecting Uconnect™ Multimedia (Satellite) Mode Press the SAT button until ⬙SAT⬙ appears in the display. A Number (ESN/SID) Please have the following information available when CD may remain in the radio while in the Satellite radio calling: mode. 1. The Electronic Serial Number/Sirius Identification Satellite Antenna To ensure optimum reception, do not place items on the Number (ESN/SID).
UNDERSTANDING YOUR INSTRUMENT PANEL 239 • Dense tree coverage may interrupt reception in the SCAN Button Pressing the SCAN button causes the tuner to search for form of short audio mutes. the next channel, pausing for eight seconds before con• Driving under wide bridges or along tall buildings can tinuing to the next. To stop the search, press the SCAN cause intermittent reception. button a second time. • Placing objects over or too close to the antenna can INFO Button cause signal blockage.
240 UNDERSTANDING YOUR INSTRUMENT PANEL TUNE Control (Rotary) SETUP Button Turn the rotary TUNE/SCROLL control knob clockwise Pressing the SETUP button allows you to select the to increase or counterclockwise to decrease the channel. following items: MUSIC TYPE Button • Display Sirius ID number — Press the AUDIO/ Pressing this button once will turn on the Music Type SELECT button to display the Sirius ID number. This mode for five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory. The channels stored in SET 2 memory can be selected by pressing the pushbutton twice.
242 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 (SALES CODE RES) Operating Instructions — Radio Mode NOTE: The radio sales code is located on the lower right NOTE: The ignition switch must be in the ON or ACC side of the radio faceplate. position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. 243 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5.
244 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second AM/FM Button time and MID will display. Turn the TUNE/SCROLL Press the buttons to select either AM or FM mode. control knob to the right or left to increase or decrease the SET/RND Button — To Set the Pushbutton mid-range tones. Memory Push the rotary TUNE/SCROLL control knob a third When you are receiving a station that you wish to time and TREBLE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 and 12 FM stations to be stored into pushbutton memory. • This radio is capable of playing compact discs (CD), The stations stored in SET 2 memory can be selected by recordable compact discs (CD-R), rewritable compact pressing the pushbutton twice. discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Every time a preset button is used, a corresponding Inserting Compact Disc(s) button number will display.
246 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • The RES Media Center is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 RW/FF Press and hold the FF (Fast Forward) button and the CD player will begin to fast forward until FF is released, or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner. Notes on Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restrictions. AM/FM Button Press the button to select either AM or FM mode.
248 UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of • Maximum number of folders. (The radio display of file multisession for CD audio or MP3 playback may result in names and folder names is limited. For large numbers longer disc loading times. of files and/or folders, the radio may be unable to display the file name and folder name, and will assign Supported MP3 File Formats a number instead.
UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 249 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
250 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection. Holding either button will bypass position to operate the radio. stations without stopping until you release it.
252 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, press the right side TUNE/ Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature SCROLL control knob to set the minutes. The minutes (if equipped). Refer to “Uconnect™ Phone” in “Under- will begin to blink. standing The Features If Your Vehicle”. 4. Adjust the minutes using the right side TUNE/ If your vehicle is not equipped with or this feature is not SCROLL control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones.
254 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Soft Rhythm and Blues Sports Talk Top 40 Weather 16-Digit Character Display Soft R&B Sports Talk Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode.
256 UNDERSTANDING YOUR INSTRUMENT PANEL window. Select the button (1–6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not be stored into pushbutton memory. You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window.
UNDERSTANDING YOUR INSTRUMENT PANEL Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display. If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded. 257 CAUTION! (Continued) • Do not use adhesive labels. These labels can peel away and jam the player mechanism.
258 UNDERSTANDING YOUR INSTRUMENT PANEL A disc can be ejected with the radio and ignition OFF. RW/FF Press and hold FF (Fast Forward) and the CD player will NOTE: Ejecting with the ignition OFF is not allowed on begin to fast forward until FF is released or RW or convertible or soft-top models (if equipped). another CD button is pressed. The RW (Reverse) button SEEK Button works in a similar manner. Press the right SEEK button for the next selection on the AM/FM Button CD.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 Notes On Playing MP3 Files • Maximum number of files: 255 The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited. For large numbers writing MP3 files, pay attention to the following restricof files and/or folders, the radio may be unable to tions.
260 UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
262 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to ⬙elapsed time⬙ display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. TIME Button (Auxiliary Mode) Press this button to change the display to time of day.
UNDERSTANDING YOUR INSTRUMENT PANEL radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at www.siriuscanada.ca for Canadian residents. 263 using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display.
264 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will • The vehicle is parked in an underground parking remain tuned to the new channel until you make another structure or under a physical obstacle. selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type function is active, the radio will be tuned to the next RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons channel with the same selected Music Type name.
266 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within five seconds after pressing the SET button, the channel will continue to play but will not be stored into pushbutton memory.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 This feature allows an iPod威 or external USB device to be Connecting The iPod姞 Or External USB Device plugged into the USB port, located in the center of the Use the connection cable to connect an iPod威 or external USB device to the vehicle’s USB connector port which is instrument panel below the climate controls. located in the center of the instrument panel below the iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威 climate controls. and iPhone威 devices.
268 UNDERSTANDING YOUR INSTRUMENT PANEL Once the audio device is connected and synchronized to • The audio device can be controlled using the radio the vehicle’s iPod威/USB/MP3 control system (iPod威 or buttons to Play, Browse, and List the iPod威 contents.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 mode. In Play mode, the following buttons on the radio • A single press backward << RW or forward FF >> will faceplate may be used to control the iPod威 or external jump backward or forward respectively, for five USB device and display data: seconds. • Use the TUNE control knob to select the next or • Use the << SEEK and SEEK >> buttons to jump to the previous track. previous or next track.
270 UNDERSTANDING YOUR INSTRUMENT PANEL • Press the SCAN button to use iPod威/USB/MP3 device scan mode, which will play the first 10 seconds of each track in the current list and then forward to the next song. To stop SCAN mode and start playing the desired track, when it is playing the track, press the SCAN button again. During Scan mode, pressing the << SEEK and SEEK >> buttons will select the previous and next tracks.
UNDERSTANDING YOUR INSTRUMENT PANEL • During all List modes, the iPod威 displays all lists in “wrap-around” mode. So if the track is at the bottom of the list, just turn the wheel backward (counterclockwise) to get to the track faster. • In List mode, the radio PRESET buttons are used as shortcuts to the following lists on the iPod威 or external USB device.
272 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • Leaving the iPod威 or external USB device (or any supported device) anywhere in the vehicle in extreme heat or cold can alter the operation or damage the device. Follow the device manufacturer’s guidelines. • Placing items on the iPod威 or external USB device, or connections to the iPod威 or external USB device in the vehicle, can cause damage to the device and/or to the connectors.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 2. After the ⬙Ready⬙ prompt and the following beep, say STEERING WHEEL AUDIO CONTROLS — IF ⬙Setup⬙, then ⬙Select Audio Devices⬙. EQUIPPED 3. Say the name of the audio device or ask the Uconnect™ phone system to list audio devices. Next Track Use the SEEK UP button, or press the VR button on the radio and say “Next Track” to jump to the next track music on your cellular phone.
274 UNDERSTANDING YOUR INSTRUMENT PANEL The right-hand rocker switch has a pushbutton in the center, and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume. Pressing the bottom of the rocker switch will decrease the volume. Pressing the center button changes the operation of the radio from AM to FM, or to CD mode, depending on which radio is in the vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 NOTE: If you experience difficulty in playing a particuCD/DVD DISC MAINTENANCE To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known 1. Handle the disc by its edge; avoid touching the good disc before considering disc player service. surface. 2.
276 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Heating And Air Conditioning Blower Control Rotate this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position. There are four blower speeds. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left in the “O” (Off) position.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 Temperature Control Mode Control (Air Direction) Rotate this control to regulate the temRotate this control to choose from sevperature of the air inside the passenger eral patterns of air distribution. You compartment. Rotating the dial left can select either a primary mode as into the blue area of the scale indicates identified by the symbols on the concooler temperatures, while rotating trol, or a blend of two of these modes.
278 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: For all settings, except full cold or full hot, there Defrost is a difference in temperature between the upper and Air is directed through the windshield and side window demist outlets. Use this mode with maxilower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but mum blower and temperature settings for best windshield and side window defrosting. cool conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL the LED in the control button to illuminate. After ten minutes, the system will return to normal mode function and the LED will turn off. 279 several times then go out. Recirculation will be disabled automatically is these modes are selected. • The A/C can be deselected manually without disturbing the mode control selection.
280 UNDERSTANDING YOUR INSTRUMENT PANEL • MAX A/C Automatic Temperature Control (ATC) — If For maximum cooling use the A/C and recirculation Equipped buttons at the same time. • ECONOMY MODE If economy mode is desired, press the A/C button to turn OFF the indicator light and the A/C compressor. Then, move the temperature control to the desired temperature.
UNDERSTANDING YOUR INSTRUMENT PANEL 281 the desired comfort level require air conditioning, the Automatic Operation The Automatic Temperature Control system automati- system will automatically make the adjustment. cally maintains the climate in the cabin of the vehicle at You will experience the greatest efficiency by simply the comfort levels desired by the driver and passenger. allowing the system to function automatically. Selecting Operation of the system is quite simple.
282 UNDERSTANDING YOUR INSTRUMENT PANEL • If your air conditioning performance seems lower than expected, check the front of the A/C condenser located in front of the radiator for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduce airflow to the condenser, reducing air conditioning performance.
UNDERSTANDING YOUR INSTRUMENT PANEL 283
284 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets. • Panel Air is directed through the outlets in the instrument • Mix Air is directed through the floor, defrost, and side panel. These outlets can be adjusted to direct airflow.
UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control Press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this button a second time to turn OFF the air conditioning. An LED in the button illuminates when manual compressor operation is selected. • Recirculation Control The system will automatically control recirculation.
286 UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather. NOTE: Recirculate without A/C should not be used for long periods as fogging may occur.
288 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 294 䡵 Automatic Transmission . . . . . . . . . . . . . . . . . 297 ▫ Automatic Transmission . . . . . . . . . . . . . . . 294 ▫ Automatic Transmission Ignition Interlock Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 294 ▫ Extreme Cold Weather (Below –20°F Or ⫺29°C) . . . . . . . . . . . . . . . 295 ▫ If Engine Fails To Start . . . .
290 STARTING AND OPERATING ▫ General Information . . . . . . . . . . . . . . . . . . 305 ▫ Traction Control System (TCS) . . . . . . . . . . . 315 䡵 Driving On Slippery Surfaces . . . . . . . . . . . . . 306 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . 316 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . 306 ▫ Hill Start Assist (HSA) – If Equipped . . . . . . 317 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . 306 ▫ Electronic Stability Control (ESC) . . .
STARTING AND OPERATING 291 ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . 333 䡵 Tire Rotation Recommendations . . . . . . . . . . . 342 ▫ Radial-Ply Tires . . . . . . . . . . . . . . . . . . . . . 335 䡵 Tire Pressure Monitor System (TPMS) . . . . . . . 343 ▫ Spare Tire Matching Original Equipped Tire And Wheel – If Equipped . . . . . . . . . . . . . . 336 ▫ Base System . . . . . . . . . . . . . . . . . . . . . . . . 346 ▫ Compact Spare Tire – If Equipped . . . . . . . .
292 STARTING AND OPERATING 䡵 Flexible Fuel (3.6L Engine Only) — 䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 357 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . ▫ E-85 General Information . . . . . . . . . . . . . . . 357 ▫ Loose Filler Cap Message . . . . . . . . ▫ Ethanol Fuel (E-85) . . . . . . . . . . . . . . . . . . . 358 䡵 Vehicle Loading . . . . . . . . . . . . . . . . ▫ Fuel Requirements . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 293 ▫ Trailer Towing Weights 䡵 Recreational Towing (Maximum Trailer Weight Ratings) . . . . . . . . 369 (Behind Motorhome, Etc.) . . . . . . . . . . . . . . . . 376 ▫ Trailer And Tongue Weight . . . . . . . . . . . . . 370 ▫ Towing Requirements . . . . . . . . . . . . . . . . . 371 ▫ Towing This Vehicle Behind Another Vehicle . . . . . . . . . . . . . . . . 376 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . .
294 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
STARTING AND OPERATING 295 For vehicles equipped with Tip Start (Six-Speed Trans- If Engine Fails To Start mission), turn the ignition switch to the START position WARNING! and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage auto• Never pour fuel or other flammable liquids into matically when the engine is running.
296 STARTING AND OPERATING Without Tip Start If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” procedures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded.
STARTING AND OPERATING 297 CAUTION! The engine block heater must be plugged in at least one hour to have an adequate warning effect on the engine. To prevent damage to the starter, wait 10 to 15 seconds before trying again. WARNING! After Starting The idle speed will automatically decrease as the engine warms up. Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution.
298 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Shift the shift lever into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift the shift lever from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting the shift lever into any gear, make sure your foot is firmly on the brake pedal.
STARTING AND OPERATING WARNING! (Continued) • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the vehicle into PARK, remove the key from the ignition, and apply the parking brake. Once the key is removed from the ignition, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
300 STARTING AND OPERATING Brake/Transmission Interlock System This vehicle is equipped with a Brake Transmission Shift Interlock System (BTSI) that holds the shift lever in the PARK position when the ignition switch is in the LOCK position. To move the shift lever out of the PARK position, the ignition switch must be turned to the ON or START position (engine running or not) and the brake pedal must be pressed.
STARTING AND OPERATING When parking on a flat surface, place the shift lever into the PARK position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
302 STARTING AND OPERATING NEUTRAL This range is used when vehicle is standing for prolonged periods with engine running. Engine may be started in this range. Set the parking brake and shift the transmission into PARK if you must leave the vehicle. WARNING! Do not coast in NEUTRAL and never turn off the ignition switch to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision.
STARTING AND OPERATING DRIVE 3 — Four-Speed Transmission This range eliminates shifts into fourth gear. The transmission will operate normally in first and second gear. Shifts into third gear may be delayed to provide second gear operation at higher speeds.
304 STARTING AND OPERATING In the event of a momentary problem, the transmission AUTOSTICK姞 — IF EQUIPPED can be reset to regain all forward gears by performing the AutoStick威 is a driver-interactive feature providing manual shift control, giving you more control of the following steps: vehicle. AutoStick威 allows you to maximize engine brak1. Stop the vehicle. ing, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system can 2. Shift the shift lever into PARK.
STARTING AND OPERATING 305 NOTE: In AutoStick威 mode, the transmission will only • Avoid using speed control when AutoStick威 is enshift up or down when the driver moves the shift lever to gaged. the right (+) or left (-), or as described below. • The transmission will automatically shift up when maximum engine speed is reached while AutoStick威 is AutoStick威 is deactivated when the shift lever is moved engaged. from the AutoStick (+/-) position into the DRIVE position.
306 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Acceleration Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the front (driving) wheels. WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels.
STARTING AND OPERATING DRIVING THROUGH WATER Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising Water WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly.
308 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
STARTING AND OPERATING POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers.
310 STARTING AND OPERATING checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized dealer. CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the New Vehicle Limited Warranty.
STARTING AND OPERATING 311 NOTE: • When the parking brake is applied and the transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied. It does not show the degree of brake application.
312 STARTING AND OPERATING WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
STARTING AND OPERATING ANTI-LOCK BRAKE SYSTEM (ABS) The Anti-Lock Brake System (ABS) provides increased vehicle stability and brake performance under most braking conditions. The system operates with a separate computer to modulate the hydraulic pressure to prevent wheel lock-up and avoid skidding on slippery surfaces. WARNING! • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer.
314 STARTING AND OPERATING service is required. However, the conventional brake properly. This self check occurs each time the vehicle is system will continue to operate normally if the “Brake started and accelerated past 7 mph (11 km/h). Warning Light” is not on. ABS is activated during braking under certain road or If the “Anti-Lock Brake Warning Light” is on, the brake stopping conditions.
STARTING AND OPERATING WARNING! The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals. 315 together to enhance vehicle stability and control in various driving conditions and are commonly referred to as ESC.
316 STARTING AND OPERATING spinning faster than the other, the system will apply the reduce brake pedal pressure unless braking is no longer brake of the spinning wheel. This will allow more engine desired. Once the brake pedal is released, the BAS is torque to be applied to the wheel that is not spinning. deactivated. This feature remains active even if TCS and ESC are in WARNING! the “Partial Off” mode. Refer to “Electronic Stability Control (ESC)” in this section of this manual.
STARTING AND OPERATING 317 Hill Start Assist (HSA) – If Equipped The HSA system is designed to assist the driver in launching a vehicle on an incline. HSA will maintain the level of brake pressure the driver inputs for a short duration once the driver takes his foot off of the brake pedal. If the driver does not apply the throttle during this short duration, the system will release brake pressure and the vehicle will roll down the incline.
318 STARTING AND OPERATING The system will only work if the intended direction of the 3. Apply the parking brake. vehicle and vehicle gear match. For example, if the 4. Start the engine. intended direction is forward up a hill and the vehicle is in DRIVE and the activation criteria are met, HSA will 5. Release the clutch pedal. activate. 6. Rotate the steering wheel one-half turn to the left. The system will work in REVERSE and all forward gears, 7.
STARTING AND OPERATING 319 EVIC Equipped Vehicles • Over-steer - when the vehicle is turning more than HSA is a Customer Programmable Feature on a EVIC appropriate for the steering wheel position. equipped vehicle. If you wish to turn off the HSA feature, • Under-steer - when the vehicle is turning less than refer to “Electronic Vehicle Information Center (EVIC)/ appropriate for the steering wheel position. Customer Programmable Features” in “Understanding Your Instrument Panel” for further information.
320 STARTING AND OPERATING reduction. This mode is intended to be used if the vehicle ESC Operating Modes All ESC equipped vehicles can choose the following ESC is in deep snow, sand, or gravel conditions and more wheel spin than ESC would normally allow is required to operating modes: gain traction. ESC On This is the normal operating mode for ESC. Whenever the vehicle is started the ESC system will be in this mode. This mode should be used for almost all driving situations.
STARTING AND OPERATING 321 To turn ESC on again, momentarily press the “ESC Off” ESC Activation/Malfunction Indicator Light And switch. This will restore the normal “ESC On” mode of ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator operation. Light” in the instrument cluster will come on WARNING! when the ignition switch is turned to the ON position. It should go out with the engine In partial ESC mode, the engine power reduction running.
322 STARTING AND OPERATING Malfunction Indicator Light” begins to flash during ac- TIRE SAFETY INFORMATION celeration, ease up on the accelerator and apply as little Tire Markings throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. NOTE: • The “ESC Activation/Malfunction Indicator Light” and the “ESC OFF Indicator Light” come on momentarily each time the ignition switch is turned ON.
STARTING AND OPERATING NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa• tion. Example: P215/65R15 95H. 323 tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the size designation. Example: LT235/85R16. Temporary spare tires are high-pressure compact spares designed for temporary emergency use only.
324 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
STARTING AND OPERATING 325 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
326 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING 327 Tire Terminology And Definitions Term B-Pillar Cold Tire Pressure Maximum Inflation Pressure Recommended Inflation Pressure Tire Placard Definition The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.
328 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar.
STARTING AND OPERATING This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. 329 axles must not be exceeded. For further information on GAWRs, vehicle loading, and trailer towing, refer to “Vehicle Loading” in this section.
330 STARTING AND OPERATING 3. Subtract the combined weight of the driver and pas- NOTE: • The following table shows examples on how to calcusengers from XXX lbs or XXX kg. late total load, cargo/luggage, and towing capacities 4. The resulting figure equals the available amount of of your vehicle with varying seating configurations cargo and luggage load capacity. For example, if “XXX” and number and size of occupants.
STARTING AND OPERATING 331
332 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement.
334 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
STARTING AND OPERATING 335 Tire Pressures For High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
336 STARTING AND OPERATING Do not install more than one non-matching temporary Spare Tire Matching Original Equipped Tire and use spare tire/wheel on the vehicle at any given time. Wheel – If Equipped The spare tire of your vehicle is equivalent in look and CAUTION! function as the original equipment tire and wheel found on the front or rear axle of your vehicle. This spare tire Because of the reduced ground clearance, do not take may be used in the tire rotation for your vehicle.
STARTING AND OPERATING T, S = Temporary Spare Tire Since this tire has limited tread life the original equipment tire should be repaired (or replaced) and reinstalled on your vehicle at the first opportunity. Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare.
338 STARTING AND OPERATING your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity. WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel.
STARTING AND OPERATING 339 Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more than 30 seconds continuously when you are stuck, and do not let anyone near a spinning wheel, no matter what the speed.
340 STARTING AND OPERATING Life Of Tire Replacement Tires The service life of a tire is dependent upon varying The tires on your new vehicle provide a balance of many factors including but not limited to: characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure.
STARTING AND OPERATING 341 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
342 STARTING AND OPERATING poorer than that of non-studded tires. Some states proSNOW TIRES Some areas of the country require the use of snow tires hibit studded tires; therefore, local laws should be during the winter. All season tires can be identified by the checked before using these tire types. M+S designation on the tire sidewall.
STARTING AND OPERATING The suggested rotation method is the “rearward cross” shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be reversed. Tire Rotation 343 TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.5°C).
344 STARTING AND OPERATING The TPM System will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The TPM System will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure.
STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
346 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will and the TPMS will monitor the actual tire pressure in illuminate in the instrument cluster, a ⬙LOW TIRE⬙ the tire.
STARTING AND OPERATING Check TPMS Warning The “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and then remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. The “Tire Pressure Monitoring Telltale Light” will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 347 5.
348 STARTING AND OPERATING 4. For each subsequent ignition key cycle, a chime will NOTE: It is particularly important for you to check the sound and the “Tire Pressure Monitoring Telltale Light” tire pressure in all of the tires on your vehicle monthly will flash on and off for 75 seconds and then remain on and to maintain the proper pressure. solid. The TPMS consists of the following components: 5.
STARTING AND OPERATING 349 Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires. In addition, the Electronic Vehicle Information Center (EVIC) will display a graphic showing the pressure values of each tire with the low tire pressure values flashing.
350 STARTING AND OPERATING Should this occur, you should stop as soon as possible, display dashes (- -) in place of the pressure value to and inflate all tires with low pressure (those flashing in indicate which sensor is not being received. the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
STARTING AND OPERATING 351 The EVIC will also display a ⬙CHECK TPM SYSTEM⬙ message for a minimum of five seconds when a system fault related to an incorrect sensor location fault is detected. In this case, the ⬙CHECK TPM SYSTEM⬙ message is then followed with a graphic display with pressure values still shown. This indicates that the pressure values are still being received from the TPM sensors but they may not be located in the correct vehicle position. 1.
352 STARTING AND OPERATING Monitoring Telltale Light” will remain ON, a chime will 5. Once you repair or replace the original road tire, and sound, and the EVIC will still display a flashing pressure reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically. In addition, the value in the graphic display. “Tire Pressure Monitoring Telltale Light” will turn OFF 3.
STARTING AND OPERATING 353 The tire pressure sensors are covered under one of the as hard starting, stalling, and hesitations. If you experifollowing licenses: ence these symptoms, try another brand of gasoline before considering service for the vehicle. United States . . . . . . . . . . . . . . . . . . . KR5S18002015B Over 40 auto manufacturers worldwide have issued and Canada. . . . . . . . . . . . . . . . . . . . . . . .
354 STARTING AND OPERATING The manufacturer supports the use of reformulated gasoline. Properly blended reformulated gasoline will provide excellent performance and durability of engine and fuel system components. Problems that result from using gasoline containing Methanol or gasoline containing more than 10% Ethanol are not the responsibility of the manufacturer and may not be covered under warranty. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as Ethanol.
STARTING AND OPERATING 355 To fix a Non-FFV vehicle inadvertently fueled once with therefore, you should ask your gasoline retailer whether the gasoline contains MMT. It is even more important to E-85 perform the following: look for gasoline without MMT in Canada, because MMT • change the engine oil and oil filter can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and Califor• disconnect and reconnect the battery nia reformulated gasoline.
356 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat.
STARTING AND OPERATING Carbon Monoxide Warnings 357 WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
358 STARTING AND OPERATING the other sections of this manual for information on features that are common between Flexible Fuel and gasoline-only powered vehicles. CAUTION! Only vehicles with the E-85 fuel filler door label can operate on E-85. Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. WARNING! E-85 Fuel Cap Ethanol vapors are extremely flammable and could cause serious personal injury.
STARTING AND OPERATING 359 NOTE: Fuel Requirements Your vehicle will operate on both unleaded gasoline with • When the ambient temperature is above 90° F (32° C), an octane rating of 87, or E-85 fuel, or any mixture of you may experience hard starting and rough idle these two. For best results, a refueling pattern that following start up even if the above recommendations alternates between E-85 and unleaded gasoline should be are followed. avoided.
360 STARTING AND OPERATING requirements of Material Standard MS-6395. MS-6395 contains additional requirements, developed during extensive fleet testing, to provide additional protection to Chrysler Group LLC engines. Use MOPAR威 or an equivalent oil meeting the specification MS-6395. Starting The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C).
STARTING AND OPERATING 361 Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability. ADDING FUEL 5 Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.
362 STARTING AND OPERATING After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door. This keeps the gas cap suspended away from and protects the vehicle’s surface. CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on.
STARTING AND OPERATING 363 Loose Filler Cap Message If the vehicles diagnostic system determines that the fuel • Never add fuel when the engine is running. This is filler cap in loose, improperly installed, or damaged, a in violation of most state and federal fire regula- “gASCAP” message will be displayed in the instrument tions and doing so may cause the MIL to turn on. cluster. Tighten the gas cap until a “clicking” sound is • A fire may result if gasoline is pumped into a heard.
364 STARTING AND OPERATING The label contains the following information: • Name of manufacturer • Month and year of manufacture • Gross Vehicle Weight Rating (GVWR) • Gross Axle Weight Rating (GAWR) front • Gross Axle Weight Rating (GAWR) rear • Vehicle Identification Number (VIN) • Type of Vehicle • Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the Vehicle Identification Number (VIN).
STARTING AND OPERATING Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GAWR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation. Weigh it on a commercial scale to insure that it is not over the GVWR.
366 STARTING AND OPERATING To maintain warranty coverage, follow the requirements Gross Trailer Weight (GTW) and recommendations in this manual concerning ve- The GTW is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or temhicles used for trailer towing. porary) loaded in or on the trailer in its ⬙loaded and If you have any questions or concerns after reviewing ready for operation⬙ condition.
STARTING AND OPERATING Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting and Operating” for further information. WARNING! It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded.
368 STARTING AND OPERATING Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Refer to the Trailer Towing Weights (Maximum Trailer Weight Ratings) chart for the Max. GTW towable for your given drivetrain. Trailer Hitch Classification Definitions Class Max.
STARTING AND OPERATING 369 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum Trailer Weight Ratings Max. GTW Max. Trailer Tongue Wt. Engine/Transmission Max. Frontal Area (Gross Trailer Wt.) (See Note 1) 2.4L/Auto See Note 2 1,000 lbs (450 kg) 100 lbs (45 kg) 3.6L/Auto 22 sq.ft. (2.0 sq.m) 2,000 lbs (900 kg) 200 lbs (90 kg) Refer to local laws for maximum trailer towing speeds.
370 STARTING AND OPERATING CAUTION! Towing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme conditions. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to “Tire Safety Information/Tire and Loading Information Placard” in “Starting and Operating” for the maximum combined weight of occupants and cargo for your vehicle.
372 STARTING AND OPERATING WARNING! WARNING! (Continued) Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and that it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision.
STARTING AND OPERATING WARNING! (Continued) 3. GAWR 4. Trailer tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve 10% of trailer tongue weight as a percentage of total trailer weight). 373 • Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tires – General Information” in “Starting and Operating” for information on tread wear indicators and for proper inspection procedure.
374 STARTING AND OPERATING • An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. • Trailer brakes are recommended for trailers over 1,000 lbs (450 kg) and required for trailers in excess of 2,000 lbs (907 kg).
STARTING AND OPERATING 375 If you REGULARLY TOW a trailer for more than 45 minutes of continuous operation, then change the automatic transmission fluid and filter according to the interval specified for “police, taxi, fleet, or frequent trailer towing.” Refer to the “Maintenance Schedule” for the proper Make sure all trailer and vehicle lights are working maintenance intervals. properly — including hazard flashers.
376 STARTING AND OPERATING • Use speed control in flat terrain and with light loads to RECREATIONAL TOWING maximize fuel efficiency. (BEHIND MOTORHOME, ETC.) Cooling System Towing This Vehicle Behind Another Vehicle To reduce potential for engine and transmission over- Recreational towing is not allowed. heating, take the following actions: • City Driving When stopped for short periods of time, shift the transmission into NEUTRAL and increase engine idle speed. • Highway Driving Reduce speed.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 378 ▫ Road Tire Installation . . . . . . . . . . . . . . . . . 388 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 378 䡵 Jump-Starting . . . . . . . . . . . . . . . . . . . . . . . . 390 ▫ Engine Oil Overheating — 2.4L Engine Only (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . 379 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 380 ▫ Jack Location . . . . . . . . . . . . . . . . .
378 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional • On the highways — slow down.
WHAT TO DO IN EMERGENCIES 379 CAUTION! WARNING! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. Turn off the air conditioning and wait until the pointer drops back into the normal range. If the pointer remains on the H (red) mark for more than a minute, turn the engine off immediately and call for service.
380 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
WHAT TO DO IN EMERGENCIES 381 WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on the Hazard Warning flashers. 3. Set the parking brake. 4. Place the shift lever into PARK (automatic transmission) or REVERSE (manual transmission). Spare Tire and Jack Stowage Preparations For Jacking 1. Park the vehicle on a firm, level surface.
382 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. 383 CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle.
384 WHAT TO DO IN EMERGENCIES NOTE: The jack handle attaches to the side of the jack 2. Loosen, but do not remove, the wheel nuts by turning with two attachment points. When the jack is partially them to the left one turn while the wheel is still on the expanded, the tension between the two attachment ground. points holds the jack handle in place. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3. 3.
WHAT TO DO IN EMERGENCIES 385 6 Front Jacking Location Rear Jacking Location 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. Do not raise the vehicle until you are sure the jack is securely engaged.
386 WHAT TO DO IN EMERGENCIES WARNING! CAUTION! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench.
WHAT TO DO IN EMERGENCIES WARNING! • To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. • To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. 7. Lower the vehicle by turning the jack screw to the left. 8. Finish tightening the nuts. Push down on the wrench while at the end of the handle for increased leverage.
388 WHAT TO DO IN EMERGENCIES Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem. Install the lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts.
WHAT TO DO IN EMERGENCIES 389 3. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover. 6. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened twice. The correct tightness of each lug nut is 100 ft/lbs (135 N·m).
390 WHAT TO DO IN EMERGENCIES WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are properly seated against the wheel. JUMP-STARTING If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in 3.
WHAT TO DO IN EMERGENCIES 391 CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. Preparations For Jump-Start The battery in your vehicle is located between the left front headlight assembly and the left front wheel splash shield.
392 WHAT TO DO IN EMERGENCIES WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
WHAT TO DO IN EMERGENCIES 393 WARNING! 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery.
394 WHAT TO DO IN EMERGENCIES 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. 10. Reinstall the protective cover over the remote positive (+) battery post of the discharged vehicle.
WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE and REVERSE. Using minimal accelerator pedal pressure to maintain the rocking motion, without spinning the wheels, is most effective. CAUTION! Racing the engine or spinning the wheels may lead to transmission overheating and failure.
396 WHAT TO DO IN EMERGENCIES WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed.
WHAT TO DO IN EMERGENCIES 397 TOWING A DISABLED VEHICLE Towing Condition Flat Tow Wheels OFF the Ground NONE ALL MODELS If transmission is operable: • Trans in NEUTRAL Wheel Lift Or Dolly Tow Flatbed Rear Front ALL • 25 mph (40 km/h)max speed • 15 mi (24 km) max distance OK BEST METHOD Proper towing or lifting equipment is required to prevent If you must use the accessories (wipers, defrosters, etc.) damage to your vehicle.
398 WHAT TO DO IN EMERGENCIES CAUTION! • Do not use sling type equipment when towing. Damage to the fascia will occur. • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and transmission may result.
WHAT TO DO IN EMERGENCIES CAUTION! Towing faster than 25 mph (40 km/h) or farther than 15 mi (24 km) with front wheels on the ground can cause severe damage to the transmission. Such damage is not covered by the New Vehicle Limited Warranty. Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flatbed towing is the preferred towing method. However, if a flatbed towing vehicle is not available, wheel lift towing equipment may be used.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.4L . . . . . . . . . . . . . 403 䡵 Maintenance Procedures . . . . . . . . . . . . . . . . . 408 䡵 Engine Compartment — 3.6L . . . . . . . . . . . . . 404 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 409 䡵 Onboard Diagnostic System — OBD II . . . . . . 405 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 412 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 405 ▫ Engine Air Cleaner Filter . . . . . . . . . .
402 MAINTAINING YOUR VEHICLE ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . 419 䡵 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . 446 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . 419 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 447 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . 422 ▫ Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . 447 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 427 ▫ Front Turn Signal . . . . .
MAINTAINING YOUR VEHICLE 403 ENGINE COMPARTMENT — 2.
404 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
406 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the “Malfunction Indicator Light (MIL).” Resolving the problem will turn the MIL light off. Normally, the OBD II system will be ready. The OBD II system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacement.
MAINTAINING YOUR VEHICLE 407 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a. The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
408 MAINTAINING YOUR VEHICLE your vehicle. Refer to these Service Manuals before MAINTENANCE PROCEDURES The pages that follow contain the required maintenance attempting any procedure yourself. services determined by the engineers who designed your NOTE: Intentional tampering with emissions control vehicle. systems may void your warranty and could result in civil Besides those maintenance items specified in the fixed penalties being assessed against you.
MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
410 MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill cap is replaced and tightened after adding oil.
MAINTAINING YOUR VEHICLE CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty. 411 Lubricants which do not have both the engine oil certification mark and the correct SAE viscosity grade number should not be used. Engine Oil Viscosity (SAE Grade) – 3.6L Engine SAE 5W-30 engine oil is preferred for all operating temperatures.
412 MAINTAINING YOUR VEHICLE Lubricants which do not have both, the engine oil certi- station, or governmental agency for advice on how and fication mark and the correct SAE viscosity grade num- where used oil and oil filters can be safely discarded in your area. ber should not be used. Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed.
MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
414 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components. Such damage is not covered by the New Vehicle Limited Warranty.
416 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a air conditioning refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. The A/C Air Filter is located in the fresh air inlet behind the glove box.
MAINTAINING YOUR VEHICLE 417 CAUTION! The A/C Air Filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8. Reinstall the glove box door dampener and glove box. A/C Air Filter Replacement 6. Remove the A/C Air Filter by pulling it straight out of the housing. 7. Install the A/C Air Filter with the arrow on the filter pointing toward the floor.
418 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring.
MAINTAINING YOUR VEHICLE Adding Washer Fluid The fluid reservoir for the windshield washers is located in the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water. WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you.
420 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information. • A hot exhaust system can start a fire if you park over materials that can burn.
MAINTAINING YOUR VEHICLE 421 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
422 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE Selection Of Coolant Use only the manufacturer’s recommended coolant. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. CAUTION! • Mixing of engine coolant (antifreeze) other than specified HOAT engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
424 MAINTAINING YOUR VEHICLE replacement. To prevent reducing this extended maintenance period, it is important that you use the same engine coolant (antifreeze) throughout the life of your vehicle. (antifreeze) solution. The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system.
MAINTAINING YOUR VEHICLE WARNING! 425 rules for your community. To prevent ingestion by animals or children, do not store ethylene glycol based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution.
426 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for engine coolant (antifreeze) freeze point or replacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. 427 WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
428 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Fluid level can be expected to fall as the brake pads wear. Brake fluid level should be checked when pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed.
MAINTAINING YOUR VEHICLE 429 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure. This could result in a collision.
430 MAINTAINING YOUR VEHICLE Parts” in “Maintaining Your Vehicle” for further information. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid. CAUTION! Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than the manufacturer’s recommended fluid will require more frequent fluid and filter changes.
MAINTAINING YOUR VEHICLE 431 driven at least 15 miles (24 km). Hot fluid cannot be held Fluid Level Check – 2.4L Engine Use the following procedure to check the automatic comfortably between the fingertips. Cold fluid is at a transmission fluid level properly: temperature below 80° F (27° C). 1. Park the vehicle on level ground. 2. Run the engine at curb idle speed for a minimum of 60 seconds. 3. Apply the parking brake fully. 4.
432 MAINTAINING YOUR VEHICLE CAUTION! • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. • Dirt and water in the transmission can cause serious damage.
MAINTAINING YOUR VEHICLE 433 hot or cold weather and other extreme conditions will Washing have an adverse effect on paint, metal trim, and under• Wash your vehicle regularly. Always wash your vebody protection. hicle in the shade using MOPAR威 Car Wash or equivalent, or a mild car wash soap, and rinse the panels The following maintenance recommendations will enable completely with clear water. you to obtain maximum benefit from the corrosion resistance built into your vehicle.
434 MAINTAINING YOUR VEHICLE CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner.
MAINTAINING YOUR VEHICLE Wheel And Wheel Trim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. To remove heavy soil and/or excessive brake dust, use MOPAR威 Wheel Cleaner or equivalent or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only MOPAR威 or equivalent is recommended. Do not use oven cleaner.
436 MAINTAINING YOUR VEHICLE • For grease stains, apply MOPAR威 Multi-Purpose if absolutely necessary. Do not use harsh cleaners or Cleaner or equivalent to a clean, damp cloth and Armor All威. Use MOPAR威 Total Clean or equivalent to remove the stain. Use a fresh, damp towel to remove clean vinyl upholstery. soap residue. Cleaning Leather Upholstery • Do not use any harsh solvents or any other form of MOPAR威 Total Clean or equivalent is specifically recommended for leather upholstery.
MAINTAINING YOUR VEHICLE WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Glass Surfaces All glass surfaces should be cleaned on a regular basis with MOPAR威 Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the inside rear window equipped with electric defrosters or the right rear quarter window equipped with the radio antenna.
438 MAINTAINING YOUR VEHICLE Replace the belts if they appear frayed or worn or if the Convertible Top Care buckles do not work properly. Cleaning Center Console Cupholders Removal Grab the rubber portion of the cupholder and lift upward. Cleaning Soak the rubber cupholder liner in a mixture of medium hot tap water and one teaspoon of mild liquid dish soap. Let soak for approximately one hour. After one hour pull the liner from the water and dip it back into the water about six times.
MAINTAINING YOUR VEHICLE 439 Immediate removal of any contaminant is recommended. Regular washing of the top will enhance its life and appearance, and make successive cleanings easier. Do not subject the top to excessive heat. Frequently vacuum the top and storage compartment. General Cleaning Careful vacuuming of the top before washing is helpful in removing dust and other foreign particles. Wash in partial shade instead of direct sun. Wet the entire vehicle before washing the top.
440 MAINTAINING YOUR VEHICLE the top fabric and to prevent streaking on painted and chrome surfaces. Allow the top to dry before lowering. Vacuuming the top with a wet/dry shop vacuum will decrease the top’s drying time, ensure removal of all dirt, and delete streaks in the material. Multiple cleanings may be necessary to remove stubborn stains. If stains persist, contact your local dealership for further suggestions.
MAINTAINING YOUR VEHICLE 441 FUSES Totally Integrated Power Module The Totally Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover. Refer to the graphic below for FUSES/TIPM location.
442 MAINTAINING YOUR VEHICLE Cartridge Fuse Mini Fuse 3 — 10 Amp Red 4 — 5 — Cavity 6 — 7 — 8 — 10 Amp Red 20 Amp Yellow 10 Amp Red 30 Amp Green 30 Amp Green Description Center High Mounted Stop Light (CHMSL)/Brake Switch Ignition Switch Trailer Tow – If Equipped Power Mirror Switch/Climate Controls Ignition Off Draw (IOD) Sense 1 Ignition Off Draw (IOD) Sense 2 Cavity Cartridge Fuse Mini Fuse 9 40 Amp Green 10 — 20 Amp Yellow 11 — 15 Amp Lt Blue 12 — 13 — 14 — 20 Amp Ye
MAINTAINING YOUR VEHICLE Cavity 15 16 Cartridge Fuse 40 Amp Green — Mini Fuse — 15 Amp Lt. Blue 17 — 10 Amp Red 18 40 Amp Green — 19 — 20 — 21 — 20 Amp Yellow 15 Amp Lt. Blue 10 Amp Red Description Cartridge Fuse Mini Fuse 22 — 10 Amp Red 23 — 24 — 25 — 10 Amp Red 26 — 15 Amp Lt.
444 MAINTAINING YOUR VEHICLE Cavity 27 28 Cartridge Fuse — — Mini Fuse 10 Amp Red 10 Amp Red 29 — — 30 — 20 Amp Yellow 31 — 10 Amp Red Description Ignition Run – Occupant Classification Module (OCM)/ Occupant Restraint Controller (ORC) Ignition Run — Occupant Classification Module (OCM)/ Occupant Restraint Controller (ORC) Hot Car (No Fuse Required) Ignition Run – Heated Seats – If Equipped Headlamp Washer – If Equipped Cavity 32 Cartridge Fuse 30 Amp Pink Mini Fuse — 33 — 10 Amp Re
MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini Fuse 35 40 Amp Green — 36 30 Amp Pink — 37 — 25 Amp Natural Description Anti-Lock Brakes (ABS) Module – If Equipped/Electronic Stability Control (ESC) Module – If Equipped Passenger Door Module (PDM)/Driver Door Module (DDM) Power Top Module – If Equipped 445 CAUTION! • When installing the Totally Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched.
446 MAINTAINING YOUR VEHICLE VEHICLE STORAGE REPLACEMENT BULBS If you will not be using your vehicle for more than All the inside bulbs are brass or glass wedge base. 21 days, you may want to take steps to preserve your Aluminum base bulbs are not approved and should not battery. be used for replacement. • Disengage the mini-fuse in the Power Distribution LIGHT BULBS – Interior Bulb No. Center labeled IOD (Ignition Off-Draw). Front Courtesy/Reading Lamp . . . . . . . . . .
MAINTAINING YOUR VEHICLE LIGHT BULBS – Exterior Bulb No. Bi-Halogen Headlamp . . . . . . . . . . . . . . . . . . . . HIR2 (Serviced at Authorized Dealer) Front Turn Signal Lamp . . . . . . . . . . . . . . . . . 3457AK Front Park Lamp . . LED (Serviced at Authorized Dealer) Front Fog Lamp . . . . . . . . . . . . . . . . . . . . . . . . . H11 Center High Mounted Stop (CHMSL) Lamp . . . . . LED (Serviced at Authorized Dealer) Rear Tail/Stop/Turn Lamp . . . . . . . . . . . . . . . . .
448 MAINTAINING YOUR VEHICLE 3. Rotate bulb and connector one-quarter turn and pull 4. Pull the bulb out of the socket and replace the bulb. outward from assembly. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. 5. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Reinsert the bulb and socket assembly and rotate clockwise one-quarter turn to secure.
MAINTAINING YOUR VEHICLE Front Turn Signal 1. Raise and prop open the hood. 449 1. Rotate the bulb’s electrical connector one-quarter turn counterclockwise and remove it from the fog lamp housing. 2. Rotate the bulb’s electrical connector one-quarter turn 2. Remove the bulb from the connector socket and install counterclockwise and remove it from the headlamp the replacement bulb. housing. 3. Remove the bulb from the connector socket and install the replacement bulb. 4.
450 MAINTAINING YOUR VEHICLE NOTE: Placing a small flat head screwdriver or similar 1. Open the trunk and gently pull back the trunk liner tool between the lamp outboard ball stud and plastic grommet from inside the trunk can assist in lamp rebehind the tail lamp. moval. 2. Remove the two plastic wing nuts from the tail lamp housing. Backup Lamps 4. Twist and remove socket from lamp. 3. Grasp the tail lamp and pull firmly outward pushing 5. Remove bulb from socket and replace.
MAINTAINING YOUR VEHICLE License Plate Lamp 1. Using a small screwdriver, press inward the locking tab on the side of the lamp assembly and pull down on the lamp assembly for removal. FLUID CAPACITIES 451 2. Pull bulb from socket, replace, and reinstall the lamp assembly into place ensuring the locking tab is secure. U.S. Fuel (Approximate) All Engines — (Except 2.4L PZEV) 16.9 Gallons 2.4L PZEV (Partial Zero Emissions Vehicle) 18.5 Gallons Engine Oil with Filter 2.
452 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 2.4L Engine Engine Oil – 3.6L Engine Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade.
MAINTAINING YOUR VEHICLE 453 Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. MOPAR威 Power Steering Fluid +4, MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product.
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 456 ▫ Required Maintenance Intervals . . . . . . . . . .
M A I N T E N A N C E 456 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done S anytime a malfunction is suspected.
MAINTENANCE SCHEDULES 457 M Your authorized dealer will reset the oil change indicator At Each Stop For Fuel message after completing the scheduled oil change. If a • Check the engine oil level about five minutes after a scheduled oil change is performed by someone other fully warmed engine is shut off.
M A I N T E N A N C E 458 MAINTENANCE SCHEDULES Once A Month • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required. • Check the fluid levels of coolant reservoir, brake master cylinder, and transmission and add as needed. S C H • Check all lights and other electrical items for correct E operation.
MAINTENANCE SCHEDULES 8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 459 M 16,000 Miles (26,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 460 MAINTENANCE SCHEDULES A I 24,000 Miles (39,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 24,000 miles (39 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule 48,000 Miles (78,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center 461 M Date Dealer Code ❏ Change the engine oil and engine oil filter.
M 462 MAINTENANCE SCHEDULES A I 56,000 Miles (91,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 56,000 miles (91 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 72,000 Miles (117,000 km) or 54 Months Maintenance Service Schedule 80,000 Miles (130,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
M 464 MAINTENANCE SCHEDULES A I 88,000 Miles (143,000 km) or N T 66 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 88,000 miles (143 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 104,000 Miles (169,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ Replace the spark plugs (2.4L PZEV Engine Only). ❏ Flush and replace engine coolant at 104,000 miles (169,00 km) or 60 months (whichever occurs first).
M 466 MAINTENANCE SCHEDULES A I 120,000 Miles (195,000 km) or N T 90 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 120,000 miles (195 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system. ❏ Change the automatic transmission fluid and filter(s). ❏ Replace the accessory drive belt(s).
MAINTENANCE SCHEDULES 136,000 Miles (221,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 136,000 miles (221 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 467 M 144,000 Miles (234,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 468 MAINTENANCE SCHEDULES A I 152,000 Miles (247,000 km) or N T 114 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 152,000 miles (247 000 km).
MAINTENANCE SCHEDULES † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 475 ▫ Prepare For The Appointment . . . . . . . . . . . 473 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 475 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 473 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
472 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 479 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 479 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 479 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 473 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
474 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 Auburn Hills, MI 48321–8004 solved with this process. Phone: (800) 247–9753 • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center P.O. Box 1621 ship. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
476 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 477 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
478 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC vemaintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. 479 significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
480 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
482 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . 310 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . 313 Accessory Delay, Power . . . . . . . . . . . . . . . . . . . . 12 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 423 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 419 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Automatic Door Locks . . . . . . . . . . . . . . . . . . . . . 32 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 158 Automatic Oil Change Indicator . . . . . . . . . . 201,213 Automatic Temperature Control (ATC) . . . . . . . . . 280 Automatic Transaxle . . . . . . . . . . . . . . . . 294,297,429 Adding Fluid . . . . . . . . . . . . . . . . . . 431,432,453 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 Fluid and Filter Changes . . . . . . . . . . . . . . .
484 INDEX Calibration, Compass . . . . . . . . . . . . . . . . . . . . . 216 Capacities, Fluid . . . . . . . . . . . . . . . . . . . . . . . . 451 Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . 403,411 Power Steering . . . . . . . . . . . . . . . . . . . . . . 309 Radiator (Coolant Pressure) . . . . . . . . . . . . . 424 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Console, Floor . . . . . . . . . . . . . . . . . . . . . . . . . . 183 Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 475 Convertible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Convertible Top . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 424 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 422 Adding Coolant (Antifreeze) . . . . . . . . . . . . . 423 Coolant Capacity . . . . . . . .
486 INDEX Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . 425 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 412 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . 32 Door Opener, Garage . . . . . . . . . . . . . . . . . . . . . 172 Driver’s Seat Back Tilt . . . . . . . . . . . . . . . . . . . . 151 Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . .
INDEX Flooded, Starting . . . . . . . . . . . . . . . . . . . . . 295 Fuel Requirements . . . . . . . . . . . . . . . . . 353,451 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 390 Oil . . . . . . . . . . . . . . . . . . . . . . . . . 409,451,452 Oil Change Interval . . . . . . . . . . . . . 201,213,410 Oil Filler Cap . . . . . . . . . . . . . . . . . . . . 403,411 Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . 412 Oil Filter Disposal . . . . . . . . . . . . . . . . . . . .
488 INDEX Fuel Requirements . . . . . . . . . . . . . . . . . 357,359 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 361 Replacement Parts . . . . . . . . . . . . . . . . . . . . 360 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 360 Flooded Engine Starting . . . . . . . . . . . . . . . . . . . 295 Floor Console . . . . . . . . . . . . . . . . . . . . . . . . . . 183 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 451 Fluid Leaks . . . . . . . . . . . . . .
INDEX Garage Door Opener (HomeLink®) . . . . . . . . . . . 172 Gas Cap (Fuel Filler Cap) . . . . . . . . . . . . 361,363,405 Gasoline, Clean Air . . . . . . . . . . . . . . . . . . . . . . 353 Gasoline, Reformulated . . . . . . . . . . . . . . . . . . . 353 Gauges Coolant Temperature . . . . . . . . . . . . . . . . . . 194 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 198 Tachometer . . . . . . . . . . . . . . . . . . . . .
490 INDEX Heated Mirrors . . . . . . . . . . . . . . . . . . . . . . Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . Heater, Engine Block . . . . . . . . . . . . . . . . . . High Beam/Low Beam Select (Dimmer) Switch Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . Holder, Cup . . . . . . . . . . . . . . . . . . . . . . . . HomeLink® (Garage Door Opener) Transmitter Hood Prop . . . . . . . . . . . . . . . . . . . . .
INDEX Key, Sentry (Immobilizer) Keyless Entry System . . . Keys . . . . . . . . . . . . . . Knee Bolster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 20 12 56 Lane Change and Turn Signals . . . . . . . . . 162,203,450 Lane Change Assist . . . . . . . . . . . . . . . . . . . . . . 162 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . .
492 INDEX High Beam/Low Beam Select . . . . . . . . . . . . 162 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . 20 Instrument Cluster . . . . . . . . . . . . . . . . . . . 157 Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451 Lights On Reminder . . . . . . . . . . . . . . . . . . 158 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Malfunction Indicator (Check Engine) . . . . . .
INDEX Malfunction Indicator Light (Check Engine) . . 206,406 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 477 Map/Reading Lights . . . . . . . . . . . . . . . . . . . . . 163 Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . 427 Memory Feature (Memory Seat) . . . . . . . . . . . . . 151 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354 Mini-Trip Computer . . . . . . . . . . . . . . . . . . . 208,214 Mirrors . . . . . . . . . . . . . . . . . . . . . . . .
494 INDEX Filter Disposal . . . . . . . . . . . . . . . . . . . . . . . 412 Identification Logo . . . . . . . . . . . . . . . . . . . 410 Materials Added to . . . . . . . . . . . . . . . . . . . 412 Recommendation . . . . . . . . . . . . . . . . . . 410,451 Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . 412 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . 411,451 Onboard Diagnostic System . . . . . . . . . . . . . . 405,406 Opener, Garage Door (HomeLink®) . . . . . . . . . . .
INDEX 495 Remote Control Programming Transmitters (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . 20 Security Alarm . . . . . . . . . . . . . . . . . . . . . . . 18 Starting System . . . . . . . . . . . . . . . . . . . . . . . 27 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 335 Remote Keyless Entry (RKE) . . . . . . . . . . . . . . . . . 20 Radiator Cap (Coolant Pressure Cap) . . . . . . . . . . 424 Remote Sound System (Radio) Controls . . . . . . . .
496 INDEX Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 80 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 83 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 476 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 322 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 80 Satellite Radio Antenna . . . . . . . . . . . . . . . . . 238,263 Schedule, Maintenance . . . .
INDEX Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 477 Setting the Clock . . . . . . . . . . . . . . . . 221,224,243,252 Settings, Personal . . . . . . . . . . . . . . . . . . . . . . . . 218 Shift Lever Override . . . . . . . . . . . . . . . . . . . . . . 396 Shifting Automatic Transaxle . . . . . . . . . . . . . . . . . . 297 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Side Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
498 INDEX Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 Taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 Telescoping Steering Column . . . . . . . . . . . . . . . 168 Temperature Control, Automatic (ATC) . . . . . . . . 280 Temperature Gauge, Engine Coolant . . . . . . . 194,379 Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 71 Theft Alarm (Security Alarm) . . . . . . . . . . . . . . . . 18 Theft System (Security Alarm) . . . . . . . . . . .
INDEX To Open Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Tongue Weight/Trailer Weight . . . . . . . . . . . . . . 370 Tonneau Cover . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365 24-Hour Towing Assistance . . . . . . . . . . . . . 125 Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . 397 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369 Recreational . . . . . . . . . . . . . . . . .
500 INDEX Vehicle Identification Number (VIN) . . . . . . . . . . . . 6 Vehicle Loading . . . . . . . . . . . . . . . . . . . 329,363,365 Vehicle Modifications/Alterations . . . . . . . . . . . . . . 7 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . 286,446 Vehicle Theft Alarm (Security Alarm) . . . . . . . . . . 18 Viscosity, Engine Oil . . . . . . . . . . . . . . . . . . . . . . 411 UCI Connector . . . . . . . . . . . . . . . . . . . . . . . . . 266 Voice Recognition System (VR) . . . . .
INDEX Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 435 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 287 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Windshield Defroster . . . . . . . . . . . . . . . . 81,278,284 Windshield Washers . . . . . . . . . . . . . . . . . . . 164,167 Fluid . . . . . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 11C27-126-AD Fourth Edition Printed in U.S.A.
