User Guide

To Remove The Seats

• Remove any obstructions from the floor behind the seat, and stow the third row

seat.

• Pull up on the release bar located at the bottom front edge of the swivel seat.

• From behind the seat, lift up on the rear of the seat cushion while pulling the seat

in a rearward direction.

• Remove the seat from the vehicle through the liftgate. Rollers are part of the seat

frame and will ease the removal process.

• Lower the release handle located at the bottom front edge of the seat.

THIRD ROW POWER RECLINER

• The power recline feature, located on the side of the seat cushion, adjusts the

seatback angle forward/rearward for occupant comfort.

Third Row Power Seat Switch

• A one-touch power folding seat switch is

located in the left rear trim panel as part

of a switch bank.

• Left and right third row seats can be folded

individually or together. The third row

power folding seats adjust to multiple

positions.

• The switch is only functional when the

liftgate is open and the vehicle is in PARK.

NOTE:

• Disconnect the center shoulder belt from the small buckle and lower the head

restraints before attempting to fold/stow the power third row seats.

• To abort seat operation while the seat is in motion, press a different seat position

selector switch to stop the seat. Once the seat stops moving, then the desired

position can be selected.

• The third row power seat system includes obstacle detection for safe operation.

When the system detects an obstacle, the motors will stop and reverse the motion

a short distance to move the seat away from the obstacle. Should this occur,

remove the obstacle and press the button again for the desired position.

• Refer to your Owner’s Manual on the DVD for manual third row seat folding

instructions.

OPERATING YOUR VEHICLE