User Guide

TURN SIGNAL/WIPER/WASHER/HIGH BEAM LEVER

Turn Signal/Lane Change Assist

• Tap the lever up or down once and the turn signal (right or left) will flash three

times and automatically turn off.

• Vehicles equipped with Blind Spot Monitoring may be programmed to add a visual

alert when signaling a lane change; refer to your Owner’s Manual on the DVD for

operation.

Front Wipers

Intermittent, Low And High Operation

• Rotate the end of the lever to the first d etent position for one of five intermittent

settings, the second detent for low wiper operation and the third detent for high

wiper operation.

Rain Sensing Wipers

• This feature senses moisture on the vehicle’s windshield and automatically

activates the wipers for the driver when the switch is in the intermittent positions.

Refer to Programmable Features in Getting Started for further details.

Mist

• Push the end of the lever inward to the first detent when a single wipe is desired.

Washer Operation

• Push the end of the lever inward to the second detent and hold for as long as spray

is desired.

Rear Wiper

• Rotate the center portion of the lever forward to the first detent for rear wiper

operation.

OPERATING YOUR VEHICLE