Owner`s manual

Remove the pouch containing the scissors jack, jack

handle, and tools.

Spare Tire Removal

For vehicles equipped with Stow ’n Go seating, the spare

tire is stowed inside a protective cover located under the

center of the vehicle by means of a cable winch mecha-

nism. The “spare tire drive” nut is located on the floor,

under a plastic cap at the front of the floor console.

NOTE: The base console, if equipped, must be removed

to raise and lower the spare tire. Refer to “Console

Features” in Section 3 for the console removal procedure.

The tool pouch contains three pieces and can be as-

sembled into a spare tire hook; to remove the compact

spare tire/cover assembly from under the vehicle, or a

Winch “T” Handle; to raise/lower the compact spare

tire/cover assembly.

Jack And Tool Location

WHAT TO DO IN EMERGENCIES 413