Owner's Manual

To enter the vehicle while the engine is running during a

remote start, you must first unlock the vehicle using the

UNLOCK button on the (RKE) transmitter. Then, prior to

the end of the 15-minute cycle, insert the key into the

ignition switch and turn the switch to the ON position,

otherwise the engine will cancel remote start and auto-

matically turn off.

Remote start willalso cancel if any ofthe followingoccur:

•

If the engine stalls or RPM exceeds 2500

•

Any engine warning lamps come on

•

The hood is opened

•

The hazard switch is pressed

•

The transmission is moved out of PARK

The vehicle can be started remotely up to a maximum of

two times. The vehicle is also allowed a maximum of one

failed start,where the remote start sequencewas initiated

but the engine stopped cranking without starting. After

either of these conditions,or if the SecurityAlarm System

is alarming or if the PANIC button was pressed, the

vehicle must be reset by inserting a valid key into the

ignition and moving it to the RUN position, then back to

LOCK.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29