Owner's Manual

General Information

This device complies with part 15 of FCC rules and with

RS-210 of Industry Canada. Operation is subject to the

following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference that may be

received including interference that may cause undesired

operation.

NOTE: Changes or modifications not expressly ap-

proved by the party responsible for compliance could

void the user’s authority to operate the equipment.

If your transmitter fails to operate from a normal dis-

tance, check for these two conditions.

1. Weak batteries in transmitter. The expected life of the

batteries is five years.

2. Closeness to a radiotransmitter, such as aradio station

tower, airport transmitter, militarybase, andsome mobile

or CB radios.

Programming Additional Transmitters

Vehicles will be shipped from the assembly plant with

two transmitters programmed only for that vehicle. A

total of eight transmitters can be programmed for a

vehicle. Additional transmitters can be programmed to

the vehicle by using a transmitter currently programmed

to the vehicle.

NOTE: When entering program mode using that trans-

mitter, all other programmed transmitters will be erased

and you will have to reprogram them for your vehicle.

Use thefollowing procedure to program additional trans-

mitters:

1. Enter your vehicle and close all doors.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25