2008 Town & Countr y 2008 OWNER’ S MANUAL 81-026-0817 First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
TABLE OF CONTENTS SECTION PAGE .............................................................3 1 1 INTRODUCTION 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4 UNDERSTANDING YOUR INSTRUMENT PANEL 5 STARTING AND OPERATING 6 WHAT TO DO IN EMERGENCIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .409 6 7 MAINTAINING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS m Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 m Vehicle Identification Number . . . . . . . . . . . . . . . 6 m How To Use This Manual . . . . . . . . . . . . . . . . . . 4 m Vehicle Modifications/Alterations . . . . . . . . . . . . 7 m Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a Warranty Information Booklet and various customer-oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is found on the left front corner of the instrument panel, visible through the windshield.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS m A Word About Your Keys . . . . . . . . . . . . . . . . . .12 m Remote Starting System — If Equipped . . . . . . . .27 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . .12 ▫ How To Use Remote Start . . . . . . . . . . . . . . . .28 m Sentry Keyt Immobilizer System . . . . . . . . . . . . .15 m Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 ▫ Replacement Keys . . . . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE m Sliding Side Door . . . . . . . . . . . . . . . . . . . . . . . .41 ▫ Power Sliding Side Door — If Equipped . . . . . .41 ▫ Sliding Side Door Child Protection Lock . . . . . .45 m Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 ▫ Power Liftgate — If Equipped . . . . . . . . . . . . .48 m Storage Bin Safety Warning . . . . . . . . . . . . . . . . .51 ▫ Safety Warnings . . . . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE m Rear Seat Delete Feature (Commercial Vehicles Only) — If Equipped . . . . .89 ▫ Restraining Infants And Small Children With Seat Delete Feature (Commercial Vehicles Only) . .90 m Engine Break-In Recommendations . . . . . . . . . . .92 11 m Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 ▫ Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Remote Keyless Entry (RKE) transmitter with integrated ignition Key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided key into the ignition switch with either side up. Wireless Ignition Node (WIN) The Wireless Ignition Node (WIN) operates similar to an ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Integrated Ignition Key The integrated ignition key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and a valet key, which stores in the rear of the transmitter. 2 The valet key allows for entry into the vehicle should the battery in the vehicle or the transmitter go dead. The valet key is also for locking the glove box. You can keep the valet key with you when valet parking.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Tip Start Feature 1. Do not press the accelerator pedal during this process. 2. Insert the integrated ignition key into the ignition switch. 3. Turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run and will disengage automatically when the engine begins running. Ignition Key Removal Place the gear selector lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder If you open the driver’s door with the integrated ignition key in the ignition, a chime will sound to remind you to remove the key. NOTE: The Key-In-Ignition reminder only sounds when the integrated ignition key is placed in the OFF or ACC position. SENTRY KEYT IMMOBILIZER SYSTEM The Sentry Keyt Immobilizer system prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • The Sentry Keyt Immobilizer system is not compatible with aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. • Exxon/Mobil Speedpass™, additional RKE transmitters, or any other transponder-equipped components on the same key chain will not cause a fault unless the additional part is physically held against the transmitter being used to start the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 programming a blank transmitter to the vehicle electronics. A blank transmitter is one that has never been programmed. After 10 seconds, a chime will sound and the Vehicle Security Light will begin to flash. Turn the ignition switch to the OFF position and remove the second key. NOTE: When having the Sentry Keyt Immobilizer system serviced, bring all vehicle RKE transmitters with you to the authorized dealer. 3.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the system’s memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be reprogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be reprogrammed. General Information The Sentry Keyt system complies with FCC rules Part 15 and with RSS-210 of Industry Canada.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Arming The System Remove the key from the ignition switch and either press a power door lock switch while the driver or passenger door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter. After all the doors are locked and closed the Vehicle Security Light in the instrument cluster will flash rapidly to signal that the system is arming.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE previously described arming sequences has occurred, the system will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm the system. If the Security Alarm System is armed and the battery becomes disconnected, the system will remain armed when the battery is reconnected; the exterior lights will flash, the horn will sound, and the ignition will not start the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE KEYLESS ENTRY (RKE) — IF EQUIPPED This system allows you to lock or unlock the doors and liftgate, and activate the PANIC alarm, optional power liftgate, left power sliding door, and right power sliding door from distances up to about 23 ft (7 m) using a hand-held radio RKE transmitter. The RKE transmitter need not be pointed at the vehicle to activate the system.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE liftgate, left power sliding door, or right power sliding door. Other options of the system allow you to turn ON/OFF the Sound Horn with Remote Lock and Flash Lights with Remote Key LOCK features. To UNLOCK Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice to unlock all doors and liftgate. The illuminated entry system also turns on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, the Remote UNLOCK feature can be enabled or disabled by performing the following procedure: Sound Horn With Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. 1. Perform this operation while standing outside the vehicle. If desired, the Sound Horn with Remote Key Lock feature can be turned on and off by performing the following procedure: 2.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The PANIC Alarm To turn the PANIC Alarm feature ON or OFF, press and hold the PANIC button on the RKE transmitter for at least one second and release. When the PANIC Alarm is on, the headlights and park lights will flash, the horn will pulse on and off and the interior lights will turn on. If the button is pushed while the liftgate is being power closed, the liftgate will reverse to the full open position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Open/Close Power Right Power Sliding Door — If Equipped Press the Right Power Sliding Door button twice on the RKE transmitter within five seconds to Open/Close Power Right Power Sliding Door. If the button on the RKE transmitter is pushed while the door is being power closed, the door will reverse to the full open position.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Programming Additional RKE Transmitters Refer to Sentry Keyt Immobilizer System “Customer Key Programming.” If you do not have a programmed RKE transmitter, contact your authorized dealer for details. Replacing the RKE Transmitter Battery The recommended replacement battery is one CR2032 battery. NOTE: Perchlorate Material — special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/perchlorate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. If your RKE transmitter fails to operate from a normal distance, check for these two conditions. 1. A weak battery in the RKE transmitter.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Use Remote Start All of the following conditions must be met before the engine will Remote Start: To Enter Remote Start Mode • Gear shift lever in PARK • Doors closed • Hood closed • Trunk closed • HAZARD switch off • BRAKE switch inactive (brake pedal not pressed) • Ignition key removed from ignition switch • Battery at an acceptable charge level, and • RKE PANIC button not pressed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE honk twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15 minute cycle. NOTE: • If your power door locks were unlocked, Remote Start will automatically LOCK the doors. • The park lights will turn on and remain on during Remote Start mode. • For security, power window and power sunroof operation (if so equipped) are disabled when the vehicle is in the Remote Start mode.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), the message “Insert Key/ Turn To Run” will flash in the EVIC until you insert the key. Once inserted, the message “Turn To Run” will flash in the EVIC until you turn the key to run. Cancel Remote Start Remote Starting will also cancel if any of the following occur: • The engine stalls or RPM exceeds 2500. • Any engine warning telltale lights come on. • The hood is opened.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS MANUAL DOOR LOCKS Lock the doors by pushing down on the lock plungers on each door trim panel. If the lock plunger is down when you shut the door, the door will lock. Therefore, make sure the keys are not inside the vehicle before closing the door.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key and from the ignition lock, and lock your vehicle. Do not leave unattended children in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries and death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE chime will sound if the key is in the ignition switch and a door is open, as a reminder to remove the key. 33 Lock Doors Automatically — If Equipped If the Lock Doors Automatically feature is enabled, your door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Place the key into the ignition. 4. Within 15 seconds cycle the ignition key from the OFF position to the ON/RUN position a minimum of four times, ending in the OFF position (do not start the engine). 5. Within 30 seconds, press the driver’s door lock switch in the lock direction. 6. A single chime will be heard to indicate the feature has been disabled. 7. To reactivate this feature, repeat the above steps.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Unlock Doors Automatically On Exit feature can be enabled or disabled by performing the following procedure: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt. (Fastening the seat belt will cancel any chimes that may be confusing during this programming procedure.) 3. Insert the key into the ignition switch. 4.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS POWER VENT WINDOWS — IF EQUIPPED Switches on the driver’s door trim panel let the driver operate the two vent windows from the driver’s seat. POWER WINDOWS You can control all windows using switches on the driver’s door trim panel. The switches will operate only when the ignition switch is in the ON or ACC position and during power accessory delay.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver’s Master Power Window Switches 37 Power Window Lockout Switch — If Equipped The driver may lock out all power windows by depressing the bar switch just below the power window switches.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE and locks and unlocks all doors. The switch will operate only when the ignition switch is in the ON or ACC position and during power accessory delay. Sliding Side Door Power Window Switch There is a single switch on each sliding side door which operates the sliding side door window. The switches will operate only when the ignition switch is in the ON or ACC position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The sliding door windows do not fully open, stopping several inches above the window sill. Auto Down Feature — If Equipped The left and right front window switches may be equipped with an auto down feature. Press the window switch past the detent, release, and the window will go down automatically. 39 Auto Up Feature With Anti–Pinch Protection — If Equipped The left front window switch may be equipped with an Auto Up feature.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Any impact due to rough road conditions may trigger the auto reverse function unexpectedly during autoclose. If this happens, pull the switch lightly to the first detent and hold to close window manually. WARNING! There is no anti-pinch protection when the window is almost closed. To avoid personal injury be sure to clear your arms, hands, fingers and all objects from the window path before closing.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SLIDING SIDE DOOR The sliding door may be opened from the inside or the outside. Pull outward on exterior handle to open the sliding door. The sliding door inside handle functions by rocking forward and back. Rocking the handle backwards opens the door and rocking forward releases the hold open latch in order to close the door. To keep your door operating properly, observe the following guidelines: • Always open the door smoothly.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are also power sliding side door switches located on the trim panel just in front of the power sliding door for the rear seat passengers. Pressing the switch once will open the power sliding door. When the door is fully open pressing the switch a second time will close the door. NOTE: The power sliding side door must be unlocked before the power sliding door switches will operate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 If the inside or outside door handles are used while the power sliding side door is activated, the power sliding door feature will be canceled and the door must be opened or closed manually. • If the power sliding side door is not in the full open or close position, it will fully open when a power sliding door switch is pressed. To close the door, wait until it is fully open and then press the switch again.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Sliding Side Door Open Flash The left and right exterior hazard lights will flash for 12 seconds when either sliding door is opened. This will alert other drivers in the area that passenger(s) could be entering or exiting the vehicle. Power Sliding Side Door Master Lock Switch The power sliding side doors may also be opened by pressing the switches on the overhead console or the switches located on the trim panel just in front of the sliding door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Sliding Side Door Child Protection Lock To provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a child protection door lock system. NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Engage The Child Protection Door Lock 1. Open the sliding side door. 2. Slide the child lock control inward (toward the vehicle) to engage the Child Protection Door Lock. Child Protection Door Lock 3. Repeat Steps 1 and 2 on the opposite sliding door. NOTE: • After engaging the Child Protection Door Lock, always test the door from the inside to make certain it is in the desired position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Avoid trapping anyone in the vehicle in a collision. Remember that the sliding doors can only be opened from the outside door handle or the switches located on the trim panel just in front of the power sliding door when the child protection locks are engaged. 47 To Disengage The Child Protection Door Lock 1. Open the sliding side door. 2. Slide the child lock control outward (away from the vehicle) to disengage the Child Protection Door Lock. 3.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To open the liftgate, depress the liftgate release handle located on the underside of the license plate bar and pull the liftgate open with one fluid motion. If the liftgate is locked and is not equipped with the power liftgate feature, pressing the button on the RKE transmitter will result in the liftgate becoming unlocked for 30 seconds allowing you to manually access the liftgate area.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power liftgate may also be opened and closed by pressing the button located on the front overhead console. The power liftgate may be closed by pressing the button, located in the upper left trim in the liftgate opening. Pushing once will only close the liftgate. This button cannot be used to open the liftgate.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear. Make sure the liftgate is closed and latched before driving away. NOTE: • If anything obstructs the power liftgate while it is closing or opening, the liftgate will automatically reverse to the closed or open position, provided it meets sufficient resistance. • There are also pinch sensors attached to the side of the liftgate opening.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the power liftgate encounters multiple obstructions within the same cycle, the system will automatically stop and must be opened or closed manually. WARNING! • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! CAUTION! In an accident, serious injury could result if the seat storage bin covers are not properly latched. The storage bin cover must be flat and locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. • DO NOT drive the vehicle with the storage bin covers open. • Keep the storage bin covers closed and latched while the vehicle is in motion. • DO NOT use a storage bin latch as a tie down.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Storage Bin Cover Emergency Release Strap — If Equipped As a security measure, your vehicle may be built with a Storage Bin Cover Emergency Release strap built into the storage bin cover latching mechanism.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark strap attached to the storage bin cover latching mechanism. Reinstalling Storage Bin Cover Emergency Release Strap If the storage bin cover strap disengages from the latch, it can be reinstalled by inserting the loose end of the strap into the latch mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for all seating positions • Pretensioning and load-limiting retractors for the front seat belts • Advanced multistage driver and new active-vent front passenger airbags • An energy-absorbing steering column and steering wheel • Knee Bolsters/Blockers for front seat occupants • Front seat belt retractors incorporate pretens
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly. Buckle up even though you are an excellent driver, even on short trips. Someone on the road may be a poor driver and cause a collision that includes you.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! WARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly. Never use a lap/shoulder belt or lap belt for more than one person, no matter what their size. Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click”. A belt that is worn under your arm is very dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly. Removing Slack From Belt 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job as well. In a collision it could even cut into you. Be sure the belt is straight. If you can’t straighten a belt in your vehicle, take it to your authorized dealer and have it fixed. 5.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Pull the strap down and secure the small latch plate of the lap belt into the small buckle until you hear a “click”. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. When the belt is long enough to fit, insert the large latch plate into the buckle until you hear a “click” The retractor will withdraw any slack in the belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When To Use The Automatic Locking Mode Use The Automatic Locking Mode anytime a child safety seat is installed in a passenger seating position. Children 12 years old and younger should be properly restrained in the rear seat whenever possible. How To Use The Automatic Locking Mode 1. Buckle the combination lap/shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System (BeltAlertT) If the occupied driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), BeltAlertt will alert the driver to buckle the seat belt. The driver should also instruct all other occupants to buckle their seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Turn the ignition switch to the OFF position. A single chime will sound to signify that you have successfully completed the programming. BeltAlertt can be reactivated by repeating this procedure. NOTE: Although BeltAlertt has been deactivated, the Seat Belt Warning Light will continue to illuminate while the driver’s seat belt remains unbuckled. Seat Belts and Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancies.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) - Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the airbag covers. window.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Seat Belt Reminder Light • Knee Impact Bolster • Front Seat Belt Retractor Pretensioners • Front Seat Track Position Sensors • Supplemental Seat Side Airbag Inflatable Curtains (SABIC) — If Equipped • Front Seat Side-mounted (Thorax) Airbags — If Equipped Front Seat Airbag Features The front airbag system has dual-stage driver and front passenger airbags.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front Passenger Airbag Special Features A new active venting front passenger airbag is designed to reduce the risk of occupants who may be out of position by the use of active vents positioned on each side of the airbag.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not put anything on or around the airbag covers or attempt to open them manually. You may damage the airbags and you could be injured because the airbag inflation capability may be compromised. The protective covers for the airbag cushions are designed to open only when the airbags are inflating.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! If your vehicle is equipped with left and right Side Airbag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the side curtain airbag is located should remain free from any obstructions. Airbags inflate in moderate to high speed impacts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE child restraints or belt-positioning booster seats should ride properly buckled up in the rear seat. Never allow children to slide the shoulder belt behind them or under their arm. If a child from 1 to 12 years old must ride in the front passenger seat because the vehicle is crowded, move the seat as far back as possible, and use the proper child restraint. Refer to the section on Child Restraints.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Being too close to the steering wheel or instrument panel during front airbag deployment could cause serious injury. Airbags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Side airbags also need room to inflate. Do not lean against the door. Sit upright in the center of the seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the AIRBAG warning light will turn off. If the ORC detects a malfunction in any part of the system, it turns on the AIRBAG warning light, either momentarily or continuously. A single chime will sound if the light comes on again after initial start up. It also includes diagnostics that will illuminate the instrument cluster AIRBAG warning light if a malfunction is noted. The diagnostics also record the nature of the malfunction.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped The ORC deploys the SABIC during collision with other vehicles and during collisions where the impact is confined to a particular area of the vehicle — such as collisions with poles, trees or similar objects. It will deploy the SABIC only on the impact side of the vehicle. NOTE: The ORC does detect and protect for rollover when equipped with SABIC airbags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abrasions and/or skin reddening to the driver and front passenger as the airbags deploy and unfold. The abrasions are similar to friction rope burns or those you might get sliding along a carpet or gymnasium floor. They are not caused by contact with chemicals. They are not permanent and normally heal quickly.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Light You will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the system immediately. 77 located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the fuse is good. • The light comes on and remains on while driving.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Under certain circumstances, EDR data may not be recorded (e.g., loss of battery power). In conjunction with other data gathered during a complete accident investigation, the electronic data may be used by DaimlerChrysler Corporation and others to learn more about the possible causes of crashes and associated injuries in order to assess and improve vehicle performance.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Requested by police under a legal warrant. • Impact acceleration and angle 4. Otherwise required by law.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Integrated Child Seat — If Equipped Operating instructions for the second row bench seat with Integrated Child Seat are included with the seat. If the instructions are not with the seat or in the Owner’s Manual Package, replacement instruction can be obtained. To obtain Integrated Child Seat replacement instructions: Refer to Publication Order Forms at the back of this manual and specify publication number 81–016–8050.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, an unrestrained child, even a tiny baby, can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the child’s size.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a front passenger airbag. An airbag deployment could cause severe injury or death to infants in this position. • Rearward-facing child seats and infant carriers must NEVER be used while the second row Swivel ’n Go seats are in the rearward-facing position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE shoulder belt. (Some booster seats are equipped with a front shield and are held in the vehicle by the lap portion.) Children Too Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the lap/shoulder belt in a rear seat. • Make sure that the child is upright in the seat.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Here are some tips on getting the most out of your child restraint: • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The passenger seat belts are equipped with cinching latch plates, which are designed to keep the lap portion tight around the child restraint so that it is not necessary to use a locking clip. Pulling up on the shoulder portion of the lap/shoulder belt will tighten the belt. The cinching latch plate will keep the belt tight, however, any seat belt system will loosen with time, so check the belt occasionally and pull it tight if necessary.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE located in the rear surface of the seatback. In addition, all third row fold-in-floor seats are equipped with a child restraint tether anchor at the center seating position. Rear Seat Tether Strap Mounting LATCH Anchorages When using the tether anchorages in the outboard seating positions, ensure that the strap is routed underneath the top of the seatback and the head restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Child restraint systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the seatback tether anchorage have been available for some time.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle. Installing the Child Restraint System We urge that you carefully follow the directions of the manufacturer when installing your child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts. REAR SEAT DELETE FEATURE (COMMERCIAL VEHICLES ONLY) — IF EQUIPPED Commercial cargo vehicles are not designed for use as a family vehicle and are not intended for carrying children in the front passenger seat.
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Rearward-facing infant restraints must never be secured in the passenger seat of a vehicle with a passenger airbag. In an accident a passenger airbag may deploy causing severe injury or death to infants riding in rearward-facing infant restraints.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Children more than 40 lbs (18 kg) should be secured in the passenger seat in a child restraint or beltpositioning booster seat with the seat adjusted to the rear most position. Older children who do not use child restraints or belt-positioning booster seats should ride properly buckled in the passenger seat with the seat adjusted to the rear most position. Never allow children to slide the shoulder belt behind them or under their arm.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! The vehicle tether anchor is designed to be used with a child restraint only. It should not be used for any other purpose. Before use, inspect the tether anchor strap for nicks, abrasions, discoloration, and loose threads. If these or any other condition that might effect the performance of the strap is observed, DO NOT USE. Personal injury may result. Contact your authorized DaimlerChrysler dealership for a replacement part.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the break-in and not interpreted as an indication of difficulty. SAFETY TIPS SAFETY CHECKS YOU SHOULD MAKE INSIDE THE VEHICLE Seat Belts Inspect the belt system periodically checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE PERIODIC SAFETY CHECKS YOU SHOULD MAKE OUTSIDE THE VEHICLE Tires Examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect tread and sidewall for cuts or cracks. Check wheel nuts for tightness, and tires (including spare) for proper pressure. Lights Have someone observe the operation of exterior lights while you work the controls.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 WARNING! If you are required to drive with the deck lid / liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 3 m Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 ▫ Advanced Phone Connectivity . . . . . . . . . . . . 120 ▫ Manual Rear View Day/Night Mirror — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 100 ▫ Things You Should Know About Your UConnectt System . . . . . . . . . . . . . . . . . . . . 122 ▫ Exterior Mirrors . . . . . . . . . . . . . . . . . . . . . . 101 ▫ General Information . . . . . . . . . . . . . . .
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE m Driver Memory Seat — If Equipped . . . . . . . . . 153 m Adjustable Pedals — If Equipped . . . . . . . . . . . 175 ▫ Setting Memory Positions And Linking RKE Transmitter To Memory . . . . . . . . . . . . . . . . . 154 m Electronic Speed Control — If Equipped . . . . . . 177 m To Open And Close The Hood . . . . . . . . . . . . . 156 ▫ Hood Safety Switch — If Equipped . . . . . . . . 158 m Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 m Electrical Power Outlets — If Equipped . . . . . . . 193 ▫ Door Trim Panel Storage . . . . . . . . . . . . . . . . 207 ▫ Power Inverter — If Equipped . . . . . . . . . . . . 194 ▫ Driver Seatback Storage — If Equipped . . . . . . 208 ▫ Electrical Outlet Use With Engine Off . . . . . . . 196 ▫ Second Row Floor Storage Bins — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 209 m Sun Screens— If Equipped . . . . . . . . . . . . . . . .
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Manual Rear View Day/Night Mirror — If Equipped Adjust the mirror to center on the view through the rear window. A two point pivot system allows for horizontal and vertical adjustment of the mirror. Manual Rearview Mirror Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjusted while set in the day position (toward windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights turn on automatically. Closing the mirror cover turns off the lights. EXTERIOR MIRRORS Side View Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Side View Manual Folding Mirrors All exterior mirrors are hinged and may be moved either forward or rearward to resist damage. The hinges have three detent positions; full forward, full rearward, and normal. Driver’s Auto-Dimming Side View Mirror — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn this feature on or off by pressing the button at the base of the Rearview Mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 mirrors. Press the switch to the Left or Right for mirror selection. Press the mirror select switch again to guard against accidentally moving a mirror position. The mirror selection will also automatically turn off after 30 seconds. 3 Power Folding Mirror Switch Both mirrors will always move together and will fold anytime the button is pressed. The ignition switch does not have to be in the ON position.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Select a mirror and press one of the four arrows for the direction you want the mirror to move. Driver’s power mirror preselected positions can be controlled by the optional Driver Memory Seat Feature. Refer to “Driver Memory Seat — If Equipped” in Section 3 of this manual. HANDS-FREE COMMUNICATION (UConnectT) — IF EQUIPPED NOTE: The sales code RER, REN and REU radios contain an integrated Hands-Free Communication (UConnectt) system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE UConnectt allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The UConnectt phonebook enables you to store up to 32 names, with four numbers per name. Each language has a separate 32-name phonebook accessible only in that language. This system is driven through your Bluetootht “Hands-Free profile” cellular phone.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The UConnectt system can be used with any Hands-Free Profile certified Bluetootht cellular phone. See the UConnectt website for supported phones. If your cellular phone supports a different profile (e.g., Headset Profile) you may not be able to use any UConnectt features. Refer to your cellular service provider or the phone manufacturer for details.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the combined form voice command 9Phonebook New Entry,9 or you can break the combined form command into two voice commands: 9Phonebook9 and 9New Entry.9 Please remember, the UConnectt system works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, after the beep, say 9Pair a Phone9 and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your cellular phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. • For identification purposes, you will be prompted to give the UConnectt system a name for your cellular phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE user from dialing an invalid combination of numbers. For example, in the U.S., 234-567-890 is nine digits long, which is not a valid U.S. phone number - the closest valid phone number has 10 digits. • The UConnectt system will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by Saying a Name 109 you can say 9John Doe,9 where John Doe is a previously stored name entry in the UConnectt phonebook.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say the name of the new entry. Use of long names helps the voice recognition and it is recommended. For example, say 9Robert Smith9 or 9Robert9 instead of 9Bob.9 • When prompted, enter the number designation (e.g., 9Home,9 9Work,9 9Mobile,9 or 9Pager9). This will allow you to store multiple numbers for each phonebook entry, if desired. • When prompted, recite the phone number for the phonebook entry that you are adding.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Some phones cannot send phonebook entries if they are already connected to any system via Bluetootht, and you may see a message on the phone display that the Bluetootht link is busy. In this case, the user must first disconnect or drop the Bluetootht connection to the UConnectt system, and then send the address book entry via Bluetootht. Please see your phone Owner’s Manual for specific instructions on how to drop the Bluetootht connection.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete Entries in the UConnectt Phonebook NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook Delete.9 • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE List All Names in the UConnectt Phonebook • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook List Names.9 • The UConnectt system will play the names of all the phonebook entries. • To call one of the names in the list, press the “Voice Recognition” button during the playing of the desired name, and say 9Call.9 NOTE: The user can also exercise 9Edit9 or 9Delete9 operations at this point.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the PHONE button to place the current call on hold and answer the incoming call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Three-Way Calling To initiate three-way calling, press the “Voice Recognition” button while a call is in progress, and make a second phone call, as described under 9Making a Second Call While Current Call in Progress.9 After the second call has established, press and hold the PHONE button until you hear a double beep, indicating that the two calls have been joined into one conference call.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the ignition key is switched to OFF, a call can continue on the UConnectt system for a certain duration, after which the call is automatically transferred from the UConnectt system to the mobile phone. • An active call is automatically transferred to the mobile phone after the ignition key is switched to OFF. UConnectT System Features Language Selection To change the language that the UConnectt system is using: • Press the PHONE button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the 9Ready9 prompt and the following beep, say 9Emergency9 and the UConnectt system will instruct the paired cellular phone to call the emergency number. This feature is supported in the U.S., Canada, and Mexico. NOTE: The emergency number dialed is based on the country where the vehicle is purchased (911 for the U.S. and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE certain companies, which time out a little too soon to work properly with the UConnectt system. Voice Mail Calling To learn how to access your voice mail, refer to 9Working with Automated Systems.9 Working with Automated Systems This method is used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated telephone system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • You may not hear all of the tones due to cellular phone network configurations; this is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature. Barge In - Overriding Prompts The “Voice Recognition” button can be used when you wish to skip part of a prompt and issue your voice recognition command immediately.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE dialing a number with your paired Bluetootht cellular phone, the audio will be played through your vehicle’s audio system. The UConnectt system will work the same as if you dial the number using voice recognition. NOTE: Certain brands of mobile phones do not send the dial ring to the UConnectt system to play it on the vehicle audio system, so you will not hear it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Connect or Disconnect Link Between the UConnectt System and Cellular Phone Your cellular phone can be paired with many different electronic devices, but can only be actively 9connected9 with one electronic device at a time. If you would like to connect or disconnect the Bluetootht connection between a UConnectt paired cellular phone and the UConnectt system, follow the instructions described in your cellular phone User’s Manual.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone call. If the selected phone is not available, the UConnectt system will return to using the highest priority phone present in or near (approximately within 30 ft [9 m]) the vehicle. Delete UConnectt Paired Cellular Phones • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Setup Phone Pairing.9 • At the next prompt, say 9Delete9 and follow the prompts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Repeat the words and phrases when prompted by the UConnectt system. For best results, the Voice Training session should be completed when the vehicle is parked with the engine running, all windows closed, and the blower fan switched OFF. • Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. This procedure may be repeated with a new user. The system will adapt to the last trained voice only.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say 9Send.9 • Storing names in the phonebook when the vehicle is not in motion is recommended. • It is not recommended to store similar sounding names in the UConnectt phonebook. • The UConnectt phonebook nametag recognition rate is optimized for the person who stored the name in the phonebook.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnectt system. • Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromised with the convertible top down. 125 Bluetootht Communication Link Cellular phones have been found to lose connection to the UConnectt system.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 3
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 129 3
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call UConnectt Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. 131 SEATS Seats are a primary part of the Occupant Restraint (protection) System of the vehicle.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Front And Second Row Seat Adjuster The adjusting bar is located under the front of the seat. Pull the bar up and move the seat to the desired position. Release the bar to lock the seat into position. Using body pressure, move forward and rearward on the seat to be sure the seat adjusters have latched. WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 CAUTION! DO NOT place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Driver Power Seat Switch 1 - Bottom Control 2 - Seatback Control Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped This feature heats the front driver and passenger seats. The controls for front heated seats are located on the center instrument panel area. The switch indicator lights will show when the HIGH or LOW heat is ON. Press the switch once to choose HIGH (two lights), press it a second time to choose LOW (one light), press it a third time for No Heat (no lights).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. DO NOT place anything on the seat that insulates against heat, such as a blanket or cushion.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE seatback to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched. Manual Reclining Seat Control WARNING! DO NOT ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar Adjust Lever — If Equipped The lumbar adjustment handle is located on the outboard side of the seat. To increase the support, rotate the handle down. To decrease the support, rotate the handle upwards. 137 Stow ’n Go Seating — If Equipped On vehicles equipped with Stow ’n Go seating, the second and third row seats may be folded into the floor for convenient storage. To Fold Second Row Seats 1. Move the front seat fully forward. 2.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Slide the storage bin locking mechanism to the 9unlocked9 position and then pull up on the storage bin latch to open the cover.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Pull up on the seatback recliner lever located on the outboard side of the seat and fold the seatback down. To assure the seatback is latched in the folded position, additional downward pressure on the seatback may be required when folding. 139 5. Pull rearward on the release strap located at the rear of the seat and tumble the seat forward into the storage bin. 3 Second Row Seat Release Strap 6.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. To Unfold Second Row Seats 1. Slide the storage bin locking mechanism to the 9unlocked9 position and then pull up on the storage bin latch to open the cover. 2. Pull up on the handle to lift the seat out of the storage bin and push the seat rearward to latch the seat anchors.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull up on the seatback recliner lever located on the outboard side of the seat, to return the seatback to its full upright position. 141 Second Row Bench Seat — If Equipped While the bench seat does not stow in the floor, it is removable for added cargo space. Rollers integrated into the seat frame ease removal through the rear. Floor storage compartments are still available with the bench seat.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power recline feature, located on the side of the seat cushion, adjusts the seatback angle forward/rearward for occupant comfort Remote Third Row Power Seat Switch— If Equipped A One-Touch Third Row Power Folding Seat switch is located in the left rear trim panel as part of a switch-bank. Third Row Power Seat Switch One Touch Folding Seat Third Row The rear switch bank allows multiple power folding and unfolding positions for the third row seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Left and right third row seats can be folded individually or together. The One Touch Third Row Power Folding Seat adjusts to the following positions using the switch bank located on the left rear trim panel: 143 NOTE: The Third Row Power Seat system includes obstacle detection for safe operation. When the system detects an obstacle, the motors will stop and reverse the motion for a brief period.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull release strap marked “2” to release the anchors. To Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 2. Pull release strap marked “1” to unlock the recliner. 3. Pulling strap “3” releases the seatback to return to its full upright position. 4. Adjust the head restraint to the desired position. WARNING! Folding Third Row Seat Strap 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tailgate Mode 1. Pull release strap “2”, then pull release strap “3” to rotate the entire seat rearward. 145 2. To restore the seat to its upright position, lift up on the seatback and push forward until the anchors latch. WARNING! To avoid serious injury or death, NEVER operate the vehicle with occupants in the third row seat while in the tailgate mode.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To return the seat to its upright position, push rearward on the seatback until it latches. Always ensure that it is fully latched. WARNING! In the event of a collision you could be injured if the seat is not fully latched. Swivel ’n Go Seating — If Equipped Premium second row Swivel ’n Go Seating features include: • A table that installs between the second and third row seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • A side storage pocket that will accommodate a phone or hand-held game • Seats are removable 147 To swivel the seat: Pull the lower handle on the outboard side of the seat and push the side of the seatback to begin rotation. Once the seat begins to rotate, the handle may be released. The seat locks in position once reaching the forward or rearward positions only. Seatbacks fold forward on an angle, not flat.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Failure to comply with the following conditions could result in serious injury or even death. • NEVER place any child seat or infant carrier in the Swivel ’n Go seat while it is in the rearward facing position. • The swivel seat should be locked in the forward position when using any child seat or infant carriers, with the vehicle in motion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Electrical contacts for the available heated seats automatically disengage or engage as the seat is removed or installed. The contacts slide past each other as the seat is rolled to and from the strikers. 149 Swivel ’n Go Seating Table — If Equipped The Swivel ’n Go Seating Table consists of an easily assembled post and top. When reinstalling the seat, make certain to lower the release handle to ensure the seat is latched securely.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The table and leg are stored beneath the floor when not in use. To install the table follow these steps: 3. Remove the pole and table top by loosening the hook and loop straps. 1. Swivel the second row seats so they are facing the rear. 4. Insert pole into base by aligning the lock button into notch of the base. 2. Open the floor storage cover in front of the second row seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Twist the pole in a clockwise rotation until it stops. Note: You will hear an audible “click” when the lock button engages the base. 6. Place the table top over the installed pole aligning with the mating feature of the underside of the table top. Apply pressure on the table top and press downward. Note: You will hear an audible “click” when the table latch engages the pole.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To separate the table top from the pole, follow these steps: 3. While pulling on the latch, pull upward to remove the table top from the pole. 1. Locate the release latch on the underside of the table top. NOTE: The table top should be removed from the leg prior to removing the leg from its mounting base. 4. Locate the release button on the pole. Press the release button firmly to activate the release from the base. 5.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all rear seats and some front seats. The floor supports the partial weight of the bagged goods.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Memory Positions And Linking RKE Transmitter To Memory 5. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). NOTE: Each time the SET(S) button and a numbered button (1 or 2) are pressed, you erase the memory settings for that button and store a new one. 6. Turn the ignition switch to the OFF position and remove the key. 1. Insert the ignition key and turn the ignition switch to the ON position. 7.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 10. Insert the ignition key and turn the ignition switch to the ON position. 11. Select 9Remote Linked to Memory9 in the Electronic Vehicle Information Center (EVIC) and enter 9Yes9 or select 9No9 from the EVIC and enter 9Yes9. Refer to the Customer Programmable features in the Electronic Vehicle Information Center (EVIC) section for more information. 12.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Disable A RKE Transmitter Linked to Memory 1. Turn the ignition switch to the OFF position and remove the key. 2. Press and release Memory Button 1. The system will recall any memory settings stored in position 1. Wait for the system to complete the memory recall before continuing to step 3. 3. Press and release the memory SET(S) button located on the driver’s door. A chime will sound signaling that you are in the memory set mode. 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 3 Hood Release Front View Hood Safety Catch Use the hood prop rod to secure the hood in the open position.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 12 in (30 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. You could have a collision. Be sure all hood latches are fully latched before driving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS All of the lights, except the hazard warning lights, headlamp high beams and flash to pass, are controlled by switches to the left of the steering column on the instrument panel. 159 Interior Lighting Interior lights are turned on when a door or liftgate is opened, the keyless entry transmitter is activated, or when the dimmer control is moved to the extreme top.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dome Light Positions Rotate the dimmer control completely upward to the second detent (extreme top position) to turn on the interior lights, except the front reading/ courtesy lights. The interior lights will remain on when the dimmer control is in this position. Interior Lighting Defeat (Off) Rotate the dimmer control to the off position (extreme bottom). The interior lights will remain off when the doors or liftgate are open.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE HALO Lights — If Equipped Halo Lights are strategically-placed, soft lighting that helps to illuminate specific areas to aid the occupants in locating specific features while driving at night. To activate the Halo lights, push in on the Halo switch located below the dimmer control. Pressing the switch in a second time, will turn the Halo lights off. Exterior Lights Parking Lights Turn the headlight switch knob to the first detent to turn the park lights on.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns your headlights on or off based on ambient light levels. To turn the system on, turn the headlight switch to the extreme counterclockwise position aligning the indicator with the “A” on the headlight switch. When the system is on, the Headlight Time Delay feature is also on. This means your headlights will stay on for up to 90 seconds after you turn the ignition switch OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights On with Wipers — If Equipped If your vehicle is equipped with Automatic Headlights it also has this customer programmable feature. When your headlights are in the automatic mode, and the engine is running, the headlights will automatically turn on when the wiper system is on. Headlight Delay — If Equipped This feature provides the safety of headlight illumination for up to 90 seconds after exiting your vehicle.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Fog Lights — If Equipped To activate the front fog lights, turn on the park lights or the low beam headlights and push in the headlight switch control knob. Pressing the headlight switch control knob in a second time, will turn the front fog lights off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE MULTIFUNCTION LEVER The multifunction control lever is located on the left side of the steering column. The Multifunction Lever assembly controls: • Turn Signals • Headlight Low and High Beams 165 If either indicator flashes at a rapid rate, check for a defective outside turn signal light bulb. If one of the indicators fails to light when the lever is moved, it would suggest that the indicator light is defective.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signal Auto-Mode Tap the multifunction control lever once and the turn signal (left or right) will flash three times, and automatically turn off. Turn Signal Warning If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for about 1 mi (1.6 km) with the turn signals on, a chime will sound to alert the driver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE the multifunction lever inward to the second detent will cause the washers to spray for a maximum of 10 seconds, or until the lever is released, and the wipers will cycle three times. NOTE: If the multifunction lever is depressed while in the delay range, the wipers will operate for several seconds after the lever is released, and then resume the intermittent interval previously selected.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Headlight Low/High Beam Select Switch and Flash-to-Pass Headlight Low/High Beam Select Switch When the headlights are turned on, pushing the lever assembly toward the instrument panel will switch from low beams to high beams. Pulling back to the neutral position returns to low beam headlights. Flash-to-Pass (Optical Horn) You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN — IF EQUIPPED To tilt the column, pull the small lever downward (located on the steering column and below the steering wheel) to the open position. You may then position the steering wheel up or down, as desired. Pull the small lever upward to the closed position to lock the steering wheel firmly in place. 3 WARNING! Tilting the steering column while the vehicle is moving is dangerous.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR PARK ASSIST SYSTEM — IF EQUIPPED The Rear Park Assist System provides visual and audible indications of the distance between the rear fascia and the detected obstacle when backing up. When backing up the driver should also use the inside rearview and outside mirrors. The Rear Park Assist System will remember the last system state (enabled or disabled) from the last ignition cycle when the ignition is changed to the RUN/ON position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Park Assist Warning Display The Rear Park Assist Warning Display, located in the headliner near the liftgate glass, provides both visual and audible warnings to indicate the distance between the rear fascia and the detected obstacle. 171 When the ignition switch is turned to the RUN/ON position, the warning display will turn on all of its LEDs for about one second.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DISPLAY LED 1st LED 2nd LED 3rd LED 4th LED 5th LED 6th LED 7th LED PARK ASSIST WARNING DISPLAY DISTANCES OBSTACLE DISTANCE FROM: REAR CENTER REAR CORNERS REAR CENTER 78.7 in (200 cm) Yellow 51.1 in (130 cm) Yellow 45.2 in (115 cm) Yellow 31.5 in (80 cm) 39.3 in (100 cm) Yellow 25.5 in (65 cm) 33.5 in (85 cm) Yellow 20 in (50 cm) 27.6 in (70 cm) Yellow 16 in (40 cm) 19.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 WARNING! CAUTION! Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Ensure that the rear bumper is free of dirt and debris to keep the system operating properly. (Customer Programmable Features)” under “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual. • Jackhammers, large trucks, and other vibrations could affect the performance of the system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE If (SERVICE PARK ASSIST SYSTEM( appears in the Electronic Vehicle Information Center (EVIC), after making sure the rear bumper is clean, please see your authorized dealer. Should this wrench symbol display with the letter P next to it, your Park Sense System needs servicing. Contact your authorized dealer.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the button forward to move the pedals forward (toward the front of the vehicle). Press the button rearward to move the pedals rearward (toward the driver). • The pedals can be adjusted with the ignition OFF. • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Control System is ON.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). 177 Activating Electronic Speed Control Push the ON/OFF button (located in the end of the lever) once and the CRUISE indicator light (located in the message window of the odometer) will illuminate showing the electronic speed control system is on.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Electronic Speed Control at a Desired Speed When the vehicle has reached the desired speed, press the SET lever downward and then release. Lift your foot off the accelerator and the vehicle will operate at the selected speed. Deactivating Electronic Speed Control A soft tap on the brake pedal or pulling the lever CANCEL toward you, will deactivate the speed control without erasing the set speed memory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Electronic Speed Control system has been designed to shut down if multiple speed control switch functions are operated simultaneously in order to ensure proper operation. If this occurs, the system can be reactivated by pushing the speed control switch ON/ OFF button and resetting the desired vehicle SET speed. Accelerating To Pass Depress the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLES Front Overhead Console — If Equipped Two versions of the overhead console are available. The base front overhead console models feature fixed incandescent courtesy/reading lights, flip-down sunglass storage and conversation mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy/Interior Lighting At the forward end of the console are two courtesy lights (standard dome light has two buttons). The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry, the lights will also turn on when the unlock button on the transmitter is pressed. The courtesy lights also function as reading lights. Press in on each lens to turn these lights on while inside the vehicle.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Courtesy/Reading Lights — If Equipped The overhead console had two sets of courtesy lights. The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry, the lights will also turn on when the unlock button on the transmitter is pressed. Overhead Compartment Features 1 2 3 4 1 1 — DVD — Rear HVAC — Interior Lights — Storage If equipped, otherwise storage.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Lighting - If Equipped” under “Lighting” in “Understanding The Features Of Your Vehicle” in Section 3. GARAGE DOOR OPENER — IF EQUIPPED HomeLinkt replaces up to three remote controls (handheld transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The HomeLinkt unit operates off your vehicle’s battery.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Your vehicle should be parked outside of the garage when programming. Begin Programming 1. Turn the ignition switch to the ON/RUN position. 2. Hold the battery side of the hand-held transmitter away from the HomeLinkt button you wish to program. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLinkt button you wish to program while keeping the indicator light in view. 3.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the indicator light stays on constantly, programming is complete and the garage door (or device) should activate when the HomeLinkt button is pressed. If the indicator light blinks rapidly for two seconds, and then turns to a constant light, proceed to Step 5 “Programming A Rolling Code System.” 5. Programming A Rolling Code System At the garage door opener motor (in the garage), locate the “Learn” or “Training” button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Firmly press and release the “Learn” or “Training” button. The name and color of the button may vary by manufacturer. NOTE: There are 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7. Return to the vehicle and press the programmed HomeLinkt button twice (holding the button for two seconds each time). If the device is plugged in and activates, programming is complete.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GATE OPERATOR/CANADIAN PROGRAMMING Canadian radio frequency laws require transmitter signals to time-out (or quit) after several seconds of transmission – which may not be long enough for HomeLinkt to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to time-out in the same manner.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 TROUBLESHOOTING TIPS If you are having trouble programming HomeLinkt, here are some of the most common solutions: 2. This device must accept any interference that may be received including interference that may cause undesired operation. • Replace the battery in the original transmitter. NOTE: The transmitter has been tested and it complies with FCC and IC rules.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Sunroof Operation Opening the Sunroof Manually Press the switch rearward and hold, and the sunroof will open automatically from any position. The sunroof will open fully, then stop automatically. During this operation, any release of the sunroof switch will stop the sunroof. WARNING! In an accident, there is greater risk of being thrown from a vehicle with an open sunroof. You could also be seriously injured or killed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. Express-Open Press the switch rearward and release, and the sunroof will open automatically from any position. The sunroof will open fully, then stop automatically. This is called Express-Open.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ignition OFF Operation The power sunroof switch will remain active for 10 minutes after the ignition switch is turned OFF. Opening either front door will cancel this feature. Auto-Express with Anti–Pinch Protection During express closing, anytime an obstacle that restricts glass movement is detected, the motor will stop and reverse travel to avoid pinching the object. Auto Express will stop and reverse travel up to three times in succession.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLETS — IF EQUIPPED Two 12 volt power outlets are located in the center lower instrument panel next to the open storage bin. The upper outlet is controlled by the ignition switch and the lower outlet is connected directly to the battery. The upper outlet will also operate a conventional cigar lighter unit (if equipped with an optional Smoker’s Package).
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED A 110 volt, 150 watt inverter outlet (if equipped) converts DC current to AC current and is located on the left rear trim panel immediately behind the second row left passenger seat. This outlet can be used to power small appliances and electronics. The Power Inverter switch is located near the center of the instrument panel below the two 12 volt power outlets.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • When the Inverter Switch is pressed, there will be a delay of approximately one second before the inverter status indicator turns ON. The status indicator of the AC power inverter indicates whether the inverter is producing AC power. • Due to built-in overload protection the inverter will shut down if the power rating is exceeded. 195 WARNING! To Avoid Serious Injury or Death: • Do not use a Three–Prong Adaptor.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL OUTLET USE WITH ENGINE OFF CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will degrade the battery even more quickly.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Gently pull up on the tab to raise the sun screen. Continue pulling the sun screen until the tab is near the top of the window. 3 Sun Screen Extended Sun Screen Attaching To Retainer Clips Once the screen is completely to the top of the window, extend the top bar of the sun screen over the two hooks attached to the top of the window. To lower the sun screen, gently lift the tab upwards to disengage the hooks and feed the screen back into the base sill.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUP HOLDERS AND CONVENIENCE TRAY DRAWER There are nine cup holders in the interior. Two cup holders in the center front instrument panel, four in the floor consoles and three more are located in the third row quarter trim panel. All liners are removable for cleaning. Pull the flexible liner from the cup holder drawer or tray; starting at one edge to ease removal. Refer to “Cleaning The Instrument Panel Cup Holders” in Section 7.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Bottle Holders There are four bottle holders located in the interior. One bottle holder is molded into each front interior door trim panels, and one bottle holder is molded into each side sliding interior door trim panel. Each holder accommodates up to 20 oz. (.6 L) size plastic bottles. Two outboard mesh pockets on intermediate seating. The mesh pockets are flexible enough to hold juice boxes, toys, games or MP3 players, etc.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONSOLE FEATURES There are two consoles available: Basic and Premium. Basic Console Basic Console features consist of the following: • The Basic Console is removable from the vehicle for additional floor space by removing the cap at the console base. • The basic console profile allows vehicle occupants to easily pass through the first row to the second. • Four cup holders can accept extra large size beverage cups or 20 oz (.6 L) plastic bottles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Remove The Basic Floor Console • Remove the front anchor cup plug and clip. • Slide the console base forward while lifting slightly to clear the rear load floor hook. • Remove the console. 201 WARNING! In an accident, serious injury could result if the removable floor console is not properly installed. Always be sure the removable floor console is fully latched.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Top Tray Storage • Upper Storage Bin can hold nine regular or 18 thin CD’s or other items • Large Console Center Storage will store headphones for the available rear DVD entertainment system or other items • 12–Volt DC Power Outlet provides continuous power inside the console for cell phones or other electronics. • Rear Occupant Accessible • Multiple Adjustments • Removable from vehicle for additional floor space.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE can easily be removed for cleaning. The cup holders will also accommodate large size cups and 20 oz (.6 L) bottles. 203 Position 2 shows the raised storage tray revealing a large storage area below. Position 1 shows the console closed with four cup holders and a convenient storage tray.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dual Storage Bins Position 3 shows the top portion of the console in a rearward position. This is accomplished by lifting the upper most latch at the front of the console. This provides easy access to the storage area below and provides two of the four cup holders for the second row passengers. Position 4 shows the complete console in its rearmost position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Remove The Premium Floor Console • Pull up on the bottom release handle in the front of the console • Lift the rear of the console up several inches • Pull rearward to disengage from floor and remove console To reinstall the console: • Position the console at a slight angle (rear slightly higher than the front • Slide the console forward into the floor bracket 205 • Rotate the rear of the console down until it is resting on the floor bracket • Push down on th
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Glove Compartments There are both upper and lower glove compartments. Upper Glove Compartment To open the upper compartment (1), press inward on the release button (2). The door will spring open about one in (2.54 cm). Manually lift the front edge of the door upward, until fully opened, and the detent is engaged.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Lower Glove Compartment To open the lower compartment (4) pull out on the release handle (3). The lower compartment handle is also equipped with a lock. Door Trim Panel Storage 3 Front Door Storage Both interior front door panels have multiple pockets for storage.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sliding Side Door Bottle Holder Both sliding doors have a bottle holder molded right into the trim. Sliding Door Bottle Holder Driver Seatback Storage — If Equipped The Driver’s Seat Back has a Primary Storage Pocket on all models and an optional Secondary Mesh Pocket.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Second Row Floor Storage Bins — If Equipped The Second Row Seat Storage Bins are located on the floor in front of the second row seats. The area below the floor covers can be used for storage when the second row seat is in the upright position. 209 Pull up on the storage bin latch to open the cover. Slide the storage bin locking mechanism to the 9unlocked9 position to allow greater access to the storage bin.
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! In an accident, serious injury could result if the seat storage bin covers are not properly latched. • DO NOT drive the vehicle with the storage bin covers open. To remove the console use the following procedure: 1. Open the console lid and remove the storage tray. 2. Pull up on the release handle located inside the floor console, and slide the console rearward to disengage from the floor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Pull up on the console to be sure it is firmly attached. 211 WARNING! In an accident, serious injury could result if the removable floor console is not properly installed. Always be sure the removable floor console is fully latched.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Compartment Storage Your vehicle is equipped with open storage areas located in each rear trim panel. Coat Hooks Coat hooks are located along the headliner for the second and third row seating positions. The coat hook load limit is 10 lbs (4.5 kg). Exceeding the recommended load limit can cause the coat hooks to break or disengage from the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The liftgate sill plate has a raised line with the statement “Load To This Line”. This line indicates how far rearward cargo can be placed without interfering with liftgate closing. 213 ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and siderails are designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars.
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Attempt to move the crossbar again to ensure that it has properly locked into position. NOTE: To help control wind noise when installing the crossbars make sure the arrows marked on the underside of the crossbars are facing the front of the vehicle. When the crossbars are not in use, the front crossbar should be fastened just forward of the middle support and the rear crossbar should be fastened at the rearmost position of the side rails.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 CAUTION! WARNING! • Long loads which extend over the windshield, such as wood panels or surfboards, or loads with large frontal area should be secured to both the front and rear of the vehicle. Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack.
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UMBRELLA HOLDER An umbrella holder has been conveniently molded into the left front door entry scuff molding. LOAD-LEVELING SYSTEM — IF EQUIPPED The automatic load-leveling system will provide a level riding vehicle under most passenger and cargo loading conditions. A hydraulic pump contained within the shock absorbers raises the rear of the vehicle to the correct height. It takes approximately 1 mile (1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 WARNING! Do not install the load-leveling system on vehicles that are not equipped with Anti-Lock Brakes. Vehicles without Anti-Lock Brakes (ABS) have a heightsensing proportioning valve. Installing a leveling system will render this system ineffective, inappropriately reducing rear brake pressure, resulting in increased stopping distances. You could have a serious accident.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS m Instrument Panels And Controls . . . . . . . . . . . . 223 ▫ Compass/Temperature Display . . . . . . . . . . . 241 m Base Instrument Cluster . . . . . . . . . . . . . . . . . . 224 m Electronic Vehicle Information Center (EVIC) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 m Premium Instrument Cluster . . . . . . . . . . . . . . . 225 m Instrument Cluster Descriptions . . . . . . . . . . . .
220 UNDERSTANDING YOUR INSTRUMENT PANEL m Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . 254 ▫ Operating Instructions - Radio Mode . . . . . . . 254 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video) . . . . 262 ▫ Notes On Playing MP3/WMA Files . . . . . . . . 264 ▫ List Button (Disc Mode For MP3/WMA Play) . . . . . . . . . . 267 ▫ Info Button (Disc Mode For MP3/WMA Play) . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL m Sales Code RER — Multimedia System — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 221 ▫ Operating Instructions - Satellite Mode . . . . . . 290 ▫ Operating Instructions — Satellite Radio . . . . . 286 ▫ Operating Instructions - Hands-Free Phone (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . 293 ▫ Operating Instructions — Hands-Free Communication (UConnectt) (If Equipped) . . .
222 UNDERSTANDING YOUR INSTRUMENT PANEL m Radio Operation And Cellular Phones . . . . . . . . 300 ▫ Summer Operation . . . . . . . . . . . . . . . . . . . . 319 m Remote Sound System Controls — If Equipped . . 300 ▫ Winter Operation . . . . . . . . . . . . . . . . . . . . . 319 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . . 301 ▫ Vacation/Storage . . . . . . . . . . . . . . . . . . . . . 320 ▫ CD Player . . . . . . . . . . . . . . . . . . . . . . . . . . 301 ▫ Window Fogging . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 223 INSTRUMENT PANELS AND CONTROLS 4 1 2 3 4 5 - Air Vents - Instrument Cluster - Gear Selector Lever - Radio - Analog Clock 6 - Upper Glove Compartment 7 - Lower Glove Compartment 8 - Climate Controls 9 - Storage or DVD— If Equipped 10 - Cup Holders 11 - Storage Bin 12 - Power Supply 12V 13 - Hazard Switch 14 - Ignition Switch 15 - Dimmer Switch 16 - Head Light Switch 17 - Power Inverter Switch
224 UNDERSTANDING YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 225 PREMIUM INSTRUMENT CLUSTER 4
226 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Low Fuel Light When the fuel level reaches approximately 2.0 gals (7.8 L) this light will turn on and remain on until fuel is added. 3. Electronic Throttle Control (ETC.) Light This light informs you of a problem with the Electronic Throttle Control system.
UNDERSTANDING YOUR INSTRUMENT PANEL 5. Tire Pressure Monitoring Telltale Lamp — If Equipped Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.
228 UNDERSTANDING YOUR INSTRUMENT PANEL as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. NOTE: Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 For additional information on Tire Pressures, refer to Section 5 — Starting and Operating, “Tire Inflation Pressures” of this manual. chime will sound for four minutes. After the chime turns off, the engine will still be critically hot until the light turns off. 6. Oil Pressure Warning Light This light shows low engine oil pressure. The light should turn on momentarily when the engine is started.
230 UNDERSTANDING YOUR INSTRUMENT PANEL turned to the “ON” position. They should go out with the engine running. If the “ESP/BAS Warning Lamp” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible. 11.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 Vehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electronic Brake Force Distribution (EBD). In the event of an EBD failure, the Brake Warning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. 12.
232 UNDERSTANDING YOUR INSTRUMENT PANEL brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer. 14. Electronic Stability Program (ESP) Indicator Light/Traction Control System (TCS) Indicator Light If this indicator light flashes during acceleration, apply as little throttle as possible. While driving, ease up on the accelerator.
UNDERSTANDING YOUR INSTRUMENT PANEL 233 19. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors engine and automatic transmission control systems. The light will illuminate when the key is in the ON position before engine start. If the bulb does not come on when turning the key from OFF to ON, have the condition checked promptly. 20.
234 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads “H“, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, and you hear continuous chimes, turn the engine off immediately, and call your authorized dealership for service. A hot engine cooling system is dangerous.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 To reset a message display (gATE, gASCAP, noFUSE, CHAngE OIL, LoCOOL, LoWASH), push and hold the button until the display resets (approximately two seconds). 24. Odometer Display Area When the appropriate conditions exist, the following odometer messages will display: Trip/Odometer Display Reset Button — Premium Cluster CHAngE OIL . . . . . . . . . . . . . . . Oil Change Required CRUISE. . . . . . . . . . . . . . . . . . . . . Cruise Control On door . . . . . . .
236 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Some of the above warnings will be displayed in the Compass Mini-Trip Computer / Electronic Vehicle Information Center Display Area under the Speedometer. Refer to” Compass Mini-Trip Computer (CMTC) — If Equipped”, later in this section for more information. CHAngE OIL Your vehicle is equipped with an engine oil change indicator system.
UNDERSTANDING YOUR INSTRUMENT PANEL U.S. federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. Therefore, if the odometer reading is changed during repair or replacement, be sure to keep a record of the reading before and after the service so that the correct mileage can be determined. The trip odometer shows individual trip mileage.
238 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the Electronic Vehicle Information Center (EVIC) display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 28. Fuel Door Reminder The arrow in this symbol is a reminder that the Fuel Filler Door is located on the left side of the vehicle. Compass Mini-Trip Computer (CMTC) Odometer Displays When the appropriate conditions exist, the following odometer messages will display: COMPASS MINI-TRIP COMPUTER (CMTC) — IF EQUIPPED CHAngE OIL . . . . . . . . . . . . . . . Oil Change Required CRUISE . . . . . . . . . . . . . . . . . . . . . . Cruise Activated door . . . . . . . .
240 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Mini-Trip Computer (CMTC) Reset Buttons CMTC Reset Button Press the left reset button located on the instrument cluster to scroll through the sub menus (i.e., Trip Functions: AVG Fuel Economy, DTE, Elapsed Time, and Units). To reset the display shown, turn the ignition switch to the ON position, then press and hold the reset button for approximately two seconds. When the appropriate conditions exist, the following odometer messages will display: NE.
UNDERSTANDING YOUR INSTRUMENT PANEL Compass Mini-Trip Computer (CMTC) Trip Odometer (ODO) This display shows the distance traveled since the last reset. Press and release the right button located on the instrument cluster to switch from odometer, to trip A or trip B. Press and hold the right button while the odometer/trip odometer is displayed to reset. Trip A Shows the total distance traveled for Trip A since the last reset. Trip B Shows the total distance traveled for Trip B since the last reset.
242 UNDERSTANDING YOUR INSTRUMENT PANEL To Set the Variance NOTE: Refer to the “Compass Variance Map” in the following “Electronic Vehicle Information Center (EVIC)” section for your Zone Value. Start the engine, and leave the transmission gear selector lever in the PARK position. Press and hold (approximately ten seconds) the CMTC reset button until the current variance zone number is displayed. To change the zone, press and release the CMTC reset button to increment the variance one step.
UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED • Compass display NOTE: The compass on your vehicle is self-calibrating, eliminating the need to manually calibrate the compass. • Trip computer functions The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the instrument cluster.
244 UNDERSTANDING YOUR INSTRUMENT PANEL Press the STEP button to scroll through sub menus (i.e. Trip Functions, Avg. Fuel Economy, DTE, Elapsed Time, and Units.
UNDERSTANDING YOUR INSTRUMENT PANEL • Left Rear Turn Signal Light Out • Right Front Turn Signal Light Out • Right Rear Turn Signal Light Out • Park Assist Disabled • Service Park Assist System • Personal Settings Not Available – Vehicle Not in Park Oil Change Required Your vehicle is equipped with an engine oil change indicator system.
246 UNDERSTANDING YOUR INSTRUMENT PANEL TRIP FUNCTIONS Press and release the MENU button until one of the following Trip Functions displays in the EVIC: determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. Press the STEP button to scroll through all the Trip Computer functions.
UNDERSTANDING YOUR INSTRUMENT PANEL Display Units of Measure in: To make your selection, press and release the STEP button until “US” or “METRIC” appears. To Reset The Display Reset will only occur while a resettable function is being displayed. Press and release the RESET button once to clear the resettable function being displayed.
248 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press the STEP button until “Calibrate Compass” is displayed in the EVIC. 4. Press and release the RESET button to start the calibration. The “CAL” indicator will be displayed in the EVIC. 5. Complete one or more 360° turns (in an area free from large metal or metallic objects) until the CAL indicator turns off. The compass will now function normally. Compass Variance Compass Variance is the difference between magnetic North and Geographic North.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 1. Turn the ignition switch ON. 2. Press and hold the compass button for approximately two seconds. 3. Press the STEP button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4. Press and release STEP button until the proper variance zone is selected according to the map. 5. Press and release the compass button to exit.
250 UNDERSTANDING YOUR INSTRUMENT PANEL Press and release the MENU button until Personal Settings displays in the EVIC. Use the Step button to display one of the following choices: Language When in this display you may select one of five languages for all display nomenclature, including the trip functions and the navigation system (if equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the remote keyless entry LOCK button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature. To make your selection, press and release the RESET button until ON or OFF appears.
252 UNDERSTANDING YOUR INSTRUMENT PANEL when exiting the vehicle. To make your selection, press and release the RESET button until 0, 30, 60, or 90 appears. Turn Headlights On with Remote Key Unlock When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the remote keyless entry transmitter. To make your selection, press and release the RESET button until OFF, 30 sec., 60 sec., or 90 sec. appears.
UNDERSTANDING YOUR INSTRUMENT PANEL you understand and save you concern about these “apparent” malfunctions, you must understand a point or two about the transmission and reception of radio signals. Two Types of Signals There are two basic types of radio signals: 1. AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary. 2. FM or Frequency Modulation, in which the frequency of the wave is varied to carry the sound.
254 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the On/Volume control knob to turn on the radio. Press the control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL Voice Recognition Button (UConnectt Hands-Free Phone) — If Equipped Press this button to operate the Hands-Free Phone (UConnectt) feature (if equipped). Refer to “Hands-Free Communication (UConnectt)” in Section 3. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped With UConnect” message will display on the radio screen.
256 UNDERSTANDING YOUR INSTRUMENT PANEL The clock can also be set by pressing the SETUP button and selecting the “SET HOME CLOCK” entry. Once in this display follow the above procedure, starting at Step 2. Setting the Tone, Balance, and Fade Push the rotary Tune/Scroll control knob and BASS will display. Turn the Tune/Scroll control knob to the right or left to increase or decrease the bass tones. INFO Button Press the INFO button for an RDS station (one with call letters displayed).
UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary Tune/Scroll control knob a fifth time and FADE will display. Turn the Tune/Scroll control knob to the left or right to adjust the sound level between the front and rear speakers. Push the rotary Tune/Scroll control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds.
258 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 16-Digit Character Display R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode.
UNDERSTANDING YOUR INSTRUMENT PANEL • DISC Play/Pause - You can toggle between playing the DVD and pausing the DVD by pushing the SELECT button (if equipped). • DVD Play Options - Selecting the DVD Play Options will display the following: • Subtitle – Repeatedly pressing SELECT will switch subtitles to different subtitle languages that are available on the disc (if equipped). • Audio Stream – Repeatedly pressing SELECT will switch to different audio languages (if supported on the disc) (if equipped).
260 UNDERSTANDING YOUR INSTRUMENT PANEL Menu Language — If Equipped Subtitle Language — If Equipped Selecting this item will allow the user to choose the default startup DVD menu language (effective only if language supported by disc). If you want to select a language not listed, then scroll down and select 9other.9 Enter the four-digit country code using the Tune/Scroll control knob to scroll up and down to select the number and then push to select.
UNDERSTANDING YOUR INSTRUMENT PANEL Aspect Ratio — If Equipped Selecting this item allows you to choose between wide screen, pan scan, and letter box. AutoPlay — If Equipped When this is set to On and a DVD video is inserted, it will bypass the DVD menu screen and automatically play the movie. In some rare cases, the DVD player may not auto-play the main title. In such cases, use the MENU button on the remote control to select desired title to play.
262 UNDERSTANDING YOUR INSTRUMENT PANEL Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}. DISC Button Pressing the DISC button will allow you to switch from AM/FM modes to Disc modes.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Radio display will show 9LOADING DISC9 when the disc is loading and “READING DISC” when the radio is reading the disc. Press and hold the EJECT button for five seconds and all CDs will be ejected from the radio. CAUTION! SEEK Button (CD MODE) Press the right SEEK button for the next selection on the CD.
264 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released, or RW or another CD button is pressed. The RW (Rewind) button works in a similar manner. AM or FM Button (CD MODE) Switches the radio to the Radio mode. Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however, acceptable MP3/WMA file recording media and formats are limited.
UNDERSTANDING YOUR INSTRUMENT PANEL Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3/ WMA files). Discs created with an option such as 9keep disc open after writing9 are most likely multisession discs. The use of multisession for CD audio or MP3/ WMA playback may result in longer disc loading times.
266 UNDERSTANDING YOUR INSTRUMENT PANEL WMA File Format WMA Specification WMA Sampling Frequency (kHz) Bit Rate (kbps) 44.1 and 48 48, 64, 96, 128, 160, 192 VBR ID3 Tag information for artist, song title, and album title are supported for ID3 version 1 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pro files are not supported. Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the Tune/Scroll control knob. Selecting a folder by pressing the Tune/Scroll control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
268 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. Operating Instructions — Voice Recognition System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in Section 3. For UConnectt “Voice Recognition System (VR)” refer to “Hands-Free Communication (UConnectt)” in Section 3. TIME Button (Auxiliary Mode) Press the TIME button to change the display from elapsed playing time to time of day.
UNDERSTANDING YOUR INSTRUMENT PANEL Dolbyt Manufactured under license from Dolbyt Laboratories. 9Dolbyt9 and the double-D symbol are trademarks of Dolbyt Laboratories. 269 SALES CODE RES — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Macrovision This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
270 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the On/Volume control knob to turn on the radio. Push the On/Volume control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped With UConnect” message will display on the radio screen. Phone Button (UConnectt Hands-Free Phone) — If Equipped Press this button to operate the Hands-Free Phone (UConnectt) feature (if equipped). Refer to “Hands-Free Communication (UConnectt)” in Section 3.
272 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). Push the rotary Tune/Scroll control knob a second time and MID will display. Turn the Tune/Scroll control knob to the right or left to increase or decrease the mid-range tones.
UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the Tune/Scroll control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
274 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Sports Talk Top 40 Weather 16-Digit Character Display Sports Talk Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode.
UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice.
276 UNDERSTANDING YOUR INSTRUMENT PANEL begin to play when you insert the disc. The display will show the disc number, the track number, and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. EJECT Button - Ejecting a CD Press the EJECT button to eject the CD.
UNDERSTANDING YOUR INSTRUMENT PANEL the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD, MP3 modes. SCAN Button Press the SCAN button to scan through each track on the CD currently playing. TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF Press the RW button to stop the CD at the beginning of the current CD track/title.
278 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Media (Disc Types) The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file normally.
UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported.
280 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to 9elapsed time9 display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the AUX button will change the mode to auxiliary device if the AUX jack is connected.
282 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REN — MULTIMEDIA SYSTEM — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN Multimedia system contains a radio, CD/DVD player, USB port, a 20-gigabyte hard drive (HDD), and a “JukeBox” (virtual CD changer). Sirius Satellite Radio is optional. The 6.5 in (16.5 cm) touch screen allows for easy menu selection. A 20-gigabyte HDD allows uploads of music and photos from CDs or through the USB port.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Voice Recognition System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in Section 3. For Hands Free Phone Communication (UConnectt) “Voice Recognition System (VR),” refer to “Hands-Free Communication (UConnectt)” in Section 3. Operating Instructions — Hands-Free Communication (UConnectT) (If Equipped) Refer to “Hands-Free Communication (UConnectt)” in Section 3. Clock Setting Procedure Setting the Clock 1.
284 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. Touch the screen where the words “Show Time if Radio is Off” are displayed to change the current setting. 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” Touch the screen where the words “Daylight Savings” are displayed to change the current setting.
UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RER — MULTIMEDIA SYSTEM — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The RER Multimedia system contains a radio, Sirius Satellite Radio player, navigation system, CD/DVD player, USB port, 20-gigabyte hard drive (HDD), and the UConnectt Hands-Free Bluetootht cellular system.
286 UNDERSTANDING YOUR INSTRUMENT PANEL Other special features include direct tune, music type selections, traffic messaging (optional), easy store presets, parental lockout for VESt (if equipped), backup camera display for vehicles equipped with a backup camera, and on some models, a dual display screen operation. Refer to your “Navigation User’s Manual” for detailed operating instructions.
UNDERSTANDING YOUR INSTRUMENT PANEL 4. Touch the screen where the words “Set Time Zone” are displayed. The time zone selection menu will appear on the screen. 5. Select a time zone by touching the screen where your selection appears. If you do not see a time zone that you want to select, touch the screen where the word “Page” is displayed to view additional time zones in the menu. Changing Daylight Savings Time When selected, this feature will display the time of day in daylight savings time.
288 UNDERSTANDING YOUR INSTRUMENT PANEL 4. To move the hour forward, touch the screen where the word “Hour” with the arrow pointing upward is displayed. To move the hour backward, touch the screen where the word “Hour” with the arrow pointing downward is displayed. 5. To move the minute forward, touch the screen where the word “Min” with the arrow pointing upward is displayed. To move the minute backward, touch the screen where the word “Min” with the arrow pointing downward is displayed. 6.
UNDERSTANDING YOUR INSTRUMENT PANEL System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account at no additional charge. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.
290 UNDERSTANDING YOUR INSTRUMENT PANEL Next, turn the knob surrounding the joystick in the center of the radio to scroll to Subscription, and then press and release the joystick. All of the ESNs that apply to your vehicle will display. Selecting Satellite Mode Press the SAT button until 9SAT9 appears in the display. A CD may remain in the radio while in the Satellite radio mode.
UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before continuing to the next.
292 UNDERSTANDING YOUR INSTRUMENT PANEL or turning the Tune/Scroll control knob within five seconds will allow the program format type to be selected. Pressing the MUSIC TYPE button again will close the MUSIC TYPE screen. Once closed, seek up, seek down, and scan will no longer be based on your selection. Toggle the MUSIC TYPE button again to select the music type.
UNDERSTANDING YOUR INSTRUMENT PANEL selected within five seconds after pressing the SET button, the channel will continue to play but will not be stored into pushbutton memory. You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory.
294 UNDERSTANDING YOUR INSTRUMENT PANEL This feature allows you to plug an iPodt mobile digital device into the vehicle’s sound system through a connector (UCI connector) using an optional connection cable (available through MOPARt). See your authorized dealer for details. Using this feature, • the iPodt audio can be played on the vehicle’s sound system, providing metadata (Track Title, Artist, Album, etc.) information display on radio.
UNDERSTANDING YOUR INSTRUMENT PANEL Play Mode When switched to UCI mode the iPodt will be in Play mode. In Play mode, you may use the following buttons on the radio faceplate to control the iPodt and display data: Tune/Scroll Knob Use the Tune/Scroll knob to go to the next or previous track. The Tune/Scroll knob functions similar to the scroll wheel on the iPodt mobile digital device. Turning it clockwise (forward) by one click while playing a track skips to the next track.
296 UNDERSTANDING YOUR INSTRUMENT PANEL previous track in the list; if you press this button at any other time in the current track it will go back to the beginning of the track. If the right (up) button is pressed during Play mode, it will go to the next track in the list. INFO Button Press the INFO button while a track is playing to see the information (Track Title, Artist, Album, etc.) for that track. Each press of the INFO button will take you to the next screen of data for that track.
UNDERSTANDING YOUR INSTRUMENT PANEL 297 Tune/Scroll Knob In the List mode, the Tune/Scroll knob functions in a similar manner as the scroll wheel on the iPodt. Radio Preset Buttons In the List mode, the radio preset buttons are used as shortcuts to the following lists on the iPodt device. Turning the Tune/Scroll knob clockwise (forward) and counterclockwise (backward) scrolls through lists, displaying the track detail on the radio display.
298 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button Pressing the LIST button will take to the top level menu of the iPodt. This takes you to the same top level menu as on your iPodt. Turn the Tune/Scroll knob to list the top menu item you wish to select and then press the Tune/Scroll knob. This will take you to the next sub menu list item of the iPodt and you can follow the same steps to go to the desired track in that list. Not all iPodt sub menu levels are available on this system.
UNDERSTANDING YOUR INSTRUMENT PANEL VIDEO ENTERTAINMENT SYSTEM (VEST) — IF EQUIPPED The optional VESt (Video Entertainment System) is available with: • One or two video screens • Nine different medias to choose from in each screen (AM, FM, Sirius Radio, DVD1, DVD2, Hard Drive Jukebox, AUX in radio, AUX1, AUX2). The LCD screen(s) are located in the overhead compartment console.
300 UNDERSTANDING YOUR INSTRUMENT PANEL RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being ON in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL decrease the volume. Pressing the center button changes the operation of the radio from AM to FM or Tape to CD mode depending on which radio is in the vehicle. The left-hand rocker switch has a push button in the center. The function of the left-hand switch is different depending on which mode you are in.
302 UNDERSTANDING YOUR INSTRUMENT PANEL 2. If a disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper, paper CD labels, or tape to the disc; avoid scratching a disc. 4. Do not use solvents such as benzine, thinner, cleaners, or antistatic sprays. 5. Store a disc in its case after playing. 6. Do not expose a disc to direct sunlight. 7. Do not store a disc where temperatures may become too high. 8.
UNDERSTANDING YOUR INSTRUMENT PANEL 303 Front Blower Control There are four blower speeds. Use this control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the off position. Manual HVAC Controls Temperature Control Use this control to regulate the temperature of the air inside the passenger compartment.
304 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C condenser (located in front of the radiator), for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduce airflow to the condenser, reducing air conditioning performance.
UNDERSTANDING YOUR INSTRUMENT PANEL MIX Mode Air is directed through the floor, defrost and side window demist outlets. This setting works best in cold or snowy conditions that require extra heat at the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield. DEFROST Mode Air is directed through the windshield and side window demist outlets. Use DEFROST mode with maximum blower and temperature settings for best windshield and side window defrosting.
306 UNDERSTANDING YOUR INSTRUMENT PANEL • In cold or damp weather, the use of the RECIRCULATION mode will cause windows to fog on the inside because of moisture build-up inside the vehicle. For maximum defogging, select the Outside Air position. • In order to prevent fogging, when the recirculation button is pressed and the mode control is set to PANEL the A/C will engage automatically. • The A/C can be deselected manually without disturbing the mode control selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 307 MAX A/C For maximum cooling use the A/C and RECIRCULATION mode buttons at the same time. Three Zone Basic Temperature Control — If Equipped With the Three Zone Basic Temperature Control System, each front seat occupant can independently control the Heating, Ventilation, and Air Conditioning (HVAC) operations coming from the outlets on their side of the vehicle.
308 UNDERSTANDING YOUR INSTRUMENT PANEL The Three Zone Basic Temperature Control bottom panel controls rear Heating, Ventilation, and Air Conditioning (HVAC) operations. The primary control for the rear blower is on the front climate control unit located on the instrument panel. The front climate control unit has five positions, off, rear, and a range of blower speeds.
UNDERSTANDING YOUR INSTRUMENT PANEL 309 Only when the front control for the rear blower is in the RR position do the second seat occupants have control of the rear blower speed. The rear blower control, located in the rear overhead console has an off position and a range of blower speeds. This allows the second seat occupants to control the volume of air circulated in the rear of the vehicle.
310 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Temperature Control When the blower knob on the front climate control unit is set to any position other than RR , the rear temperature selection follows the setting of the rear temperature control knob on the front climate control unit. The rear mode selection follows the setting of the rear mode control knob. control is in FLOOR, DEFROST, or MIX modes, airflow will be directed out of the rear floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL AUTOMATIC TEMPERATURE CONTROL (ATC) — IF EQUIPPED • Front Three Zone ATC allows both the driver and front occupant and rear seat occupants to select individual comfort settings • Occupants in the vehicle select AUTO mode operation and a comfort temperature setting, using rotary knobs on the control unit. • The system provides set-and-forget operation for optimum comfort and convenience. • The system can be controlled manually if desired.
312 UNDERSTANDING YOUR INSTRUMENT PANEL Below the automatic control, the system selects the appropriate mode (airflow outlets) and fan speed.
UNDERSTANDING YOUR INSTRUMENT PANEL Operation of the system is quite simple. 1. Press the AUTO button and the word AUTO will illuminate in the front ATC display, along with three temperatures for Driver’s, Passenger, and Rear seats. The system will then automatically regulate the amount of airflow. 2. Next, adjust the temperature you would like the system to maintain by adjusting the driver’s, passenger, and rear seat rotary temperature knobs.
314 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Operation This system offers a full complement of manual override features. The AUTO symbol in the front ATC display will be turned off when the system is being used in the manual mode. NOTE: Each of these features operate independently from each other. If any one feature is controlled manually, the remaining features will continue to operate automatically.
UNDERSTANDING YOUR INSTRUMENT PANEL FLOOR Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. MIX Mode Air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keeping the windshield clear. DEFROST Mode Air comes from the windshield and side window demist outlets.
316 UNDERSTANDING YOUR INSTRUMENT PANEL a second time to turn off the RECIRCULATION mode LED and allow outside air into the vehicle. NOTE: In cold weather, use of the RECIRCULATION mode may lead to excessive window fogging. The RECIRCULATION mode is not allowed in the FLOOR, MIX and DEFROST modes to improve window clearing operation. Recirculation will be disabled automatically if these modes are selected. Recirculation will be disabled automatically if these modes are selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 317 Operation of the rear system is quite simple. 1. Press the REAR LOCK button on the front ATC control unit. This turns off the REAR LOCK icon in the rear temperature knob. 2. Rotate the Rear Blower, Rear Temperature and the Rear Mode Control knobs to suit your comfort needs. 3. ATC is selected by adjusting the rear blower knob counterclockwise to AUTO.
318 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to provide comfort as quickly as possible. • The temperature can be displayed in U.S. or Metric by selecting the US/M customer programmable feature. Refer to ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED, Personal Settings (Customer Programmable Features) in Section 4 of this manual.
UNDERSTANDING YOUR INSTRUMENT PANEL When rear controls are locked by the front system, the LOCK symbol on the temperature knob is illuminated and any rear overhead adjustments are ignored. Rear Mode Control AUTO Mode The rear system automatically maintains the correct mode and comfort level desired by the rear seat occupants. FLOOR Mode Air comes from the floor outlets. BI-LEVEL Mode Air comes from both the headliner outlets and the floor outlets.
320 UNDERSTANDING YOUR INSTRUMENT PANEL “Maintenance Procedures”, of this manual for proper coolant selection. Use of the air RECIRCULATION mode during winter months is not recommended because it may cause window fogging. VACATION/STORAGE Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting.
UNDERSTANDING YOUR INSTRUMENT PANEL OPERATING TIPS 321 A/C AIR FILTER — IF EQUIPPED On vehicles equipped with Automatic Temperature Control (ATC), the climate control system filters out dust and pollen from the air. Refer to Section 7 “Air Conditioning” for filter replacement instructions. ELECTRIC REAR WINDOW DEFROSTER — IF EQUIPPED Press this button (located on your front climate control) to turn on the rear window defroster and the optional heated mirrors. A light will show that the defroster is on.
322 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: You may turn off the heated mirror feature at anytime by pressing the rear window defogger switch a second time. CAUTION! To avoid damaging the electrical conductors of the rear window defroster, do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window. Labels can be peeled off after soaking with warm water.
STARTING AND OPERATING CONTENTS m Starting Procedures . . . . . . . . . . . . . . . . . . . . . 326 m Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . 339 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 327 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . . 340 m Engine Block Heater — If Equipped . . . . . . . . . 329 m Electronic Brake Control Systems . . . . . . . . . . . . 342 m Automatic Transmission . . . . . . . . . . . . . . . . . .
324 STARTING AND OPERATING m Driving Through Water . . . . . . . . . . . . . . . . . . 349 m Fuel Requirements . . . . . . . . . . . . . . . . . . . . . . 379 ▫ Flowing/Rising Water . . . . . . . . . . . . . . . . . . 349 ▫ 3.3L & 3.8L Gasoline Engine . . . . . . . . . . . . . . 379 m Tire Safety Information . . . . . . . . . . . . . . . . . . . 351 ▫ 4.0L Gasoline Engine . . . . . . . . . . . . . . . . . . . 379 ▫ Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . 351 m Adding Fuel . .
STARTING AND OPERATING 325 ▫ Cruising Range . . . . . . . . . . . . . . . . . . . . . . . 389 m Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . 394 ▫ Replacement Parts . . . . . . . . . . . . . . . . . . . . . 389 ▫ Common Towing Definitions . . . . . . . . . . . . . 394 ▫ Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 389 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . . 405 m Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . . .
326 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • NEVER leave unattended children alone in a vehicle. Leaving children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition.
STARTING AND OPERATING Automatic Transmission The gear selector lever must be in the NEUTRAL or PARK position before you can start the engine. Depress the brake pedal before shifting into any driving gear. Normal Starting (Above 32°F/0°C) 1. DO NOT depress the accelerator. 2. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages.
328 STARTING AND OPERATING If The Engine Fails To Start WARNING! • NEVER pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • DO NOT attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
STARTING AND OPERATING If the engine shows no sign of starting after two 15– second intervals of cranking with the accelerator pedal held to the floor, the “Normal Starting” procedure should be repeated. After Starting The idle speed will automatically decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather.
330 STARTING AND OPERATING AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift the gear selector lever into PARK only after the vehicle has come to a complete stop. • Do not shift the gear selector lever from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting the gear selector lever into any gear, make sure your foot is firmly on the brake pedal.
STARTING AND OPERATING while the ignition switch is in the ON position. Always press the brake pedal first before moving the gear selector lever out of PARK. Automatic Transmission Ignition Interlock System For electrical system malfunctions, there is an override for the interlock system. In order to override this system, remove the cover located to the top right of the gear selector lever in the instrument panel.
332 STARTING AND OPERATING the instrument cluster will display transmission gear selection as 6, 5, 4, 3, 2, 1 for six-speed and 4, 3, 2, 1 for four-speed transmissions. Gear Ranges DO NOT race the engine when shifting the gear selector lever from PARK or NEUTRAL positions into another gear range. PARK Shifting the gear selector lever in PARK supplements the parking brake by locking the transmission. The engine can be started in this gear. Never attempt to use PARK while vehicle is in motion.
STARTING AND OPERATING WARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the gear selector lever into PARK, remove the key from the ignition, and apply the parking brake. Once the key is removed from the ignition, the transmission gear selector lever is locked in the PARK position, securing the vehicle against unwanted movement.
334 STARTING AND OPERATING CAUTION! WARNING! Before moving the gear selector lever out of PARK, you must turn the ignition from LOCK/OFF to ON so the steering wheel and gear selector lever are released. Otherwise, damage to the steering column or gear selector lever could result. Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions.
STARTING AND OPERATING using the “5” range will improve performance and extend transmission life by reducing excessive shifting and heat build-up. DRIVE — Four-Speed Transmission This range should be used for most city and highway driving. It provides the smoothest upshifts, downshifts, and best fuel economy. However, select the “3” range when frequent transmission shifting occurs while using the DRIVE range, such as when operating the vehicle under heavy loading conditions, (i.e.
336 STARTING AND OPERATING Switching from ERS to D-Mode (Drive) can be done at any vehicle speed. To shift from “Drive” mode to “ERS” mode, move gear selector lever to the left (-) once. The current gear will be maintained as the top gear. To disable ERS, simply press and hold the gear selector lever to the right (+) until “D” is displayed in the instrument cluster odometer. WARNING! Do not downshift for additional engine braking on a slippery surface.
STARTING AND OPERATING Reset Mode - Electronic Transmission The transmission is monitored electronically for abnormal conditions. If a condition is detected that could cause damage, the transmission automatically shifts into 2nd gear (3rd gear for six-speed). The transmission remains in 2nd gear (3rd gear for six-speed) despite the forward gear selected. PARK, REVERSE, and NEUTRAL will continue to operate.
338 STARTING AND OPERATING selector lever in the PARK position. To release the parking brake, depress the emergency break pedal a second time and let your foot up as you feel the brake disengage. before placing the gear selector lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the gear selector lever out of PARK. WARNING! • Always fully apply the parking brake when leaving your vehicle, or it may roll and cause damage or injury.
STARTING AND OPERATING WARNING! NEVER leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle When parking on a hill, turn the front wheels toward the curb on a downhill grade, and away from the curb on an uphill grade.
340 STARTING AND OPERATING WARNING! • Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You wouldn’t have your full braking capacity in an emergency. • Driving a vehicle with the brake light on is dangerous. A significant decrease in braking performance or vehicle stability during braking may occur.
STARTING AND OPERATING • A slight drop or fall away of the brake pedal at the end of the stop. WARNING! • The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals.
342 STARTING AND OPERATING Anti-Lock Brake Light The ABS light monitors the Anti-Lock System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on.
STARTING AND OPERATING spinning faster than the other, the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. This feature remains active even if the ESP is in the “Partial Off” mode. The Traction Control System (TCS) Indicator Light, located in the instrument cluster, starts to flash as soon as the tires lose traction and the wheels begin to spin. This indicates that the TCS is active.
344 STARTING AND OPERATING Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. The BAS complements the Anti-Lock Brake System (ABS). Applying the brakes very quickly results in the best BAS assistance.
STARTING AND OPERATING Electronic Stability Program (ESP) This system enhances directional control and stability of the vehicle under various driving conditions. ESP corrects for over/under steering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the over/under steer condition. Engine power may also be reduced to help the vehicle maintain the desired path.
346 STARTING AND OPERATING gain traction. To turn ESP on again, momentarily depress the ESP OFF switch. This will restore the normal ESP ON mode of operation. NOTE: To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand or gravel, it may be desirable to switch to the Partial OFF mode by pressing the ESP OFF switch. Once the situation requiring ESP to be switched to the Partial OFF mode is overcome, turn ESP back on by momentarily depressing the ESP OFF switch.
STARTING AND OPERATING POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers.
348 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES ACCELERATION Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the front wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the front (driving) wheels. WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have an accident.
STARTING AND OPERATING DRIVING THROUGH WATER Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising Water WARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly.
350 STARTING AND OPERATING CAUTION! WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings 351 • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter 9P9 is absent from this tire size designation. Example: 215/65R15 96H. • LT (Light Truck) - Metric tire sizing is based on U.S. design standards.
352 STARTING AND OPERATING Tire Sizing Chart P Tire Sizing Chart Passenger Car tire size based on U.S. design standards (....blank....( Passenger Car tire based on European design standards LT Light Truck tire based on U.S. design standards T Temporary spare tire 31 215 65 Overall diameter in inches (in) Section width in millimeters (mm) Aspect Ratio of section height to section width of tire, written in percent (%) 10.
STARTING AND OPERATING H 353 Tire Sizing Chart A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) (....blank....
354 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING Tire Loading and Tire Pressure 355 Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side B-Pillar.
356 STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard and in the “Vehicle Loading” section of this manual.
STARTING AND OPERATING amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
358 STARTING AND OPERATING
STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle. Three primary areas are affected by improper tire pressure: 359 1.
360 STARTING AND OPERATING WARNING! •Unequal tire pressures can cause steering problems. You could lose control of your vehicle. •Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. 3. Ride Comfort and Vehicle Stability— Proper tire inflation contributes to a comfortable ride. Over-inflation produces a jarring and uncomfortable ride.
STARTING AND OPERATING The pressure should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pressure. DO NOT make a visual judgement when determining proper inflation. Radial tires may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap (if equipped).
362 STARTING AND OPERATING Tire Pressures for High-Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation.
STARTING AND OPERATING 363 vehicle only. Since this tire has limited tread life, the original tire should be repaired (or replaced) and reinstalled at the first opportunity. DO NOT install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare. WARNING! DO NOT install more than one compact spare tire/wheel on the vehicle at any given time. • Temporary use spare tires are for emergency use only.
364 STARTING AND OPERATING Limited-Use Spare Tire — If Equipped The limited-use spare tire is for temporary emergency use on your vehicle. This tire is identified by a limiteduse spare tire warning label located on the limited use spare tire and wheel assembly. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not. Installation of this limited use spare tire affects vehicle handling.
STARTING AND OPERATING Tire Spinning When stuck in mud, sand, snow, or ice conditions, DO NOT spin your vehicle’s wheels faster than 30 mph (48 km/h) or continuously for longer than 30 seconds without stopping when you are stuck. 365 Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. Refer to “Freeing A Stuck Vehicle” in Section 6 of this manual for additional information.
366 STARTING AND OPERATING Many states have laws requiring tire replacement at this point. Tire Life The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an accident resulting in serious injury or death.
STARTING AND OPERATING 367 WARNING! CAUTION! • DO NOT use a tire, wheel size or rating other than that Replacing original tires with tires of a different size may result in false speedometer and odometer readings. specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle.
368 STARTING AND OPERATING Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-ofbalance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications. Chains must be the proper size for the vehicle, as recommended by the chain manufacturer. NOTE: Do not use tire chains on a compact spare tire.
STARTING AND OPERATING Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufacture suggest a maximum speed. This notice applies to all chain traction devices, including link and cable (radial) chains. SNOW TIRES Some areas of the country require the use of snow tires during Winter. Standard tires are of the all-season type and satisfy this requirement as indicated by the M+S designation on the tire sidewall.
370 STARTING AND OPERATING The suggested rotation method is the “forward-cross” shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure based on the cold inflation tire pressure requirements found on the tire placard located on the driver’s-side B-pillar. The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease.
STARTING AND OPERATING increased to the recommended cold tire placard pressure in order for the TPMS warning lamp to be turned off. The system will automatically update and the TPMS warning lamp will extinguish once the updated tire pressures have been received. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information. For example, your vehicle may have a recommended cold (parked for more than three hours) tire pressure of 35 psi (241 kPa).
372 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the TPMS SENSOR. NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure.
STARTING AND OPERATING The Basic TPMS consists of the following components: • Receiver Module • Four Wheel Sensors • TPMS Telltale Warning Light The TPMS Telltale Warning Light will illuminate in the instrument cluster, and an audible chime will be activated when one or more of the four active road tire pressures are low.
374 STARTING AND OPERATING 3. Accumulation of excessive snow and/or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPMS sensors. NOTE: 1. The compact spare tire (if equipped) does not have a TPMS sensor. Therefore the TPMS will not monitor the pressure in the compact spare tire. 2.
STARTING AND OPERATING NOTE: It is particularly important to regularly check and maintain proper tire pressure in all the tires. The Premium TPMS consists of the following components: • Receiver Module 375 pressures are low. In addition, the EVIC will display one or more Low Pressure messages (Left Front, Left Rear, Right Front, Right Rear) for three seconds, and a graphic display of the pressure value(s) with the low tire(s) flashing.
376 STARTING AND OPERATING Should a low tire condition occur on any of the four active road tire(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold tire pressure value. The system will automatically update, the graphic display of the pressure value(s) will stop flashing, and the TPMS Telltale Warning Light will extinguish once the updated tire pressure(s) have been received.
STARTING AND OPERATING will not be present, and a pressure value will be displayed instead of dashes. A system fault can occur by any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Accumulation of excessive snow and/or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5.
378 STARTING AND OPERATING 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically. In addition, the TPMS Telltale Warning Light will turn off and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long no tire pressure is below the low pressure warning limit in any of the four active road tires.
STARTING AND OPERATING FUEL REQUIREMENTS 3.3L & 3.8L Gasoline Engine All engines are designed to meet all emissions regulations and provide excellent fuel economy and performance when using high-quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended. Under normal conditions, the use of premium gasoline will not provide a benefit over high-quality regular gasolines, and in some circumstances may result in poorer performance. 4.
380 STARTING AND OPERATING Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifications (the World Wide Fuel Charter, WWFC) to define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle. The manufacturer recommends the use of gasolines that meet the WWFC specifications if they are available.
STARTING AND OPERATING 381 manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol. It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane.
382 STARTING AND OPERATING Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emission control system. • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat.
STARTING AND OPERATING Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. • To prevent carbon monoxide poisoning DO NOT inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. • NEVER run the engine in a closed area, such as a garage, and NEVER sit in a parked vehicle with the engine running for an extended period.
384 STARTING AND OPERATING CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let impurities into the fuel system and may cause the Malfunction Indicator Light (MIL) to turn on due to fuel vapors escaping from the system. CAUTION! To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. NOTE: When the fuel nozzle “clicks” or shuts off, the fuel tank is full.
STARTING AND OPERATING NOTE: • Tighten the fuel filler cap until you hear a “clicking” sound. This is an indication that the fuel filler cap is properly tightened. • If the gas cap is not tightened properly, the Malfunction Indicator Light may come on. Be sure the gas cap is tightened every time the vehicle is refueled. WARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling.
386 STARTING AND OPERATING FLEXIBLE FUEL — 3.3L ENGINES ONLY E-85 General Information The information in this section is for Flexible Fuel Vehicles (FFV) only. These vehicles can be identified by the unique fuel filler door label that states: Ethanol (E-85) or Unleaded Gasoline Only. This section only covers those subjects that are unique to these vehicles.
STARTING AND OPERATING CAUTION! Only vehicles with the E-85 Decal and/or fuel filler door label can operate on E-85. 387 ETHANOL FUEL (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smoking materials lit in or near the vehicle when removing the fuel filler tube cap (gas cap) or filling the tank.
388 STARTING AND OPERATING For best results, a refueling pattern that alternates between E-85 and unleaded gasoline should be avoided. When you do switch fuels, it is recommended that: Observing these precautions will avoid possible hard starting and/or significant deterioration in driveability during warm up. Selection Of Engine Oil For Flexible Fuel Vehicles (FFV) E-85 and Gasoline Vehicles FFV vehicles operated on E85 require specially formulated engine oils.
STARTING AND OPERATING increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up. Cruising Range Because E-85 fuel contains less energy per gallon than gasoline, you will experience an increase in fuel consumption. You can expect your MPG and your driving range to decrease by about 30% compared to gasoline operation.
390 STARTING AND OPERATING VEHICLE LOADING As required by National Highway Traffic Safety Administration Regulations, your vehicle has a certification label affixed to the driver’s side door or pillar. Vehicle Certification Label Your vehicle has a Vehicle Certification Label attached to the driver’s door pillar.
STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR.
392 STARTING AND OPERATING Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GAWR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation. Weigh it on a commercial scale to ensure that it is not over the GVWR. Figure out the weight on the front and rear of the vehicle separately.
STARTING AND OPERATING 393 CAUTION! Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could cause you to lose control. Also overloading can shorten the life of your vehicle. 5 A loaded vehicle is shown in the illustration. Note that neither the GVWR or the GAWR capacities have been exceeded.
394 STARTING AND OPERATING A loaded vehicle is shown in the above table. Note that neither the GVWR nor the GAWR capacities have been exceeded. Common Towing Definitions The following trailer towing-related definitions will assist you in understanding the following information: NOTE: Refer to the “Vehicle Certification Label” attached to the rear of the driver’s door for your vehicle’s GVWR and GAWR’s. This table is only an example.
STARTING AND OPERATING Gross Combination Weight Rating (GCWR) The gross combination weight rating (GCWR) is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings include a 68 kg (150 lbs) allowance for the presence of a driver). Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR.
396 STARTING AND OPERATING hitch is the most popular on the market today and is commonly used to tow small- and medium-sized trailers. Weight-Distributing Hitch A weight-distributing system works by applying leverage through spring (load) bars. They are typically used for heavier loads to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer’s axle(s).
STARTING AND OPERATING 397 5 Weight Distributing Hitch System Improper Adjustment of Weight Distributing System
398 STARTING AND OPERATING Trailer Hitch Classifications Your vehicle may be factory-equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package. See an authorized dealer for package content. The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
STARTING AND OPERATING 399 Trailer Towing Weights (Maximum Trailer Weight Ratings) The Trailer Towing Weights Chart provides the maximum trailer weight ratings towable for a given drivetrain. Engine/Transaxle GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross Trailer Wt.) Max. Tongue Wt. Up to 2 persons & Luggage 180 lbs (82 kg) 1,800 lbs (816 kg) 3.3L, 3.8L and 4.0L / 3 to 5 persons & Luggage 1,350 135 lbs (61 kg) 7,000 lbs (3 175 kg) 22 sq ft (2.
400 STARTING AND OPERATING Trailer and Trailer Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to severely sway side-to-side, which will cause loss of control of the vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer accidents.
STARTING AND OPERATING Consider the following items when computing the weight on the rear axle of the vehicle: • Trailer tongue weight • Weight of any other type of cargo/luggage or equipment put in or on your vehicle • Weight of the driver and all passengers NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle.
402 STARTING AND OPERATING WARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have an accident.
STARTING AND OPERATING 4. Trailer tongue weight rating for that trailer hitch. (This requirement may limit the ability to always achieve the 10% to 15% range of trailer tongue weight as a percentage of total trailer weight.) Towing Requirements — Tires • Do not attempt to tow a trailer while using a compact spare tire. • Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.
404 STARTING AND OPERATING CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. WARNING! Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident.
STARTING AND OPERATING 405 5 Four-Pin Connector Seven-Pin Connector Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic.
406 STARTING AND OPERATING Towing Tips — Automatic Transmission The DRIVE gear can be selected when towing. However, if frequent shifting occurs while in DRIVE, move the gear selector lever into third gear (with four-speed transmission) or fifth gear (with six-speed transmission).
STARTING AND OPERATING Towing Tips — Cooling System To reduce potential for engine and transmission overheating, take the following actions: • City Driving When stopped for short periods of time, put transmission gear selector lever in NEUTRAL but do not increase engine idle speed. • Highway Driving Reduce speed. • Air Conditioning Turn off temporarily. • Refer to Cooling System Operating information in the Maintenance section of this manual for more information.
WHAT TO DO IN EMERGENCIES CONTENTS m Hazard Warning Flasher . . . . . . . . . . . . . . . . . . 410 m Jump-Starting Procedure . . . . . . . . . . . . . . . . . . 424 m If Your Engine Overheats . . . . . . . . . . . . . . . . . 410 m Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . 426 m Jacking And Tire Changing . . . . . . . . . . . . . . . . 412 m Towing A Disabled Vehicle . . . . . . . . . . . . . . . . 427 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . .
410 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the radio. To engage the Hazard Warning Flashers, depress the switch on the instrument panel. When the Hazard Warning Switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Push the switch a second time to turn off the flashers.
WHAT TO DO IN EMERGENCIES the fan control to High. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately, and call for service.
412 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • The jack is designed to use as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes.
WHAT TO DO IN EMERGENCIES 413 Spare Tire Removal For vehicles equipped with Stow ’n Go seating, the spare tire is stowed inside a protective cover located under the center of the vehicle by means of a cable winch mechanism. The “spare tire drive” nut is located on the floor, under a plastic cap at the front of the floor console. NOTE: The base console, if equipped, must be removed to raise and lower the spare tire. Refer to “Console Features” in Section 3, for the console removal procedure.
414 WHAT TO DO IN EMERGENCIES Preparations For Jacking Park the vehicle on a firm level surface, avoid ice or slippery areas, set the parking brake and place the gear selector in PARK. Turn OFF the ignition. • Turn on the Hazard Warning Flasher. • Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. • Passengers should not remain in the vehicle when the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES Jacking Instructions 415 WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: Jack Warning Label • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic transmission in park; a manual transmission in reverse.
416 WHAT TO DO IN EMERGENCIES WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic.
WHAT TO DO IN EMERGENCIES 3. Assemble the winch handle extensions to form the Spare Tire Hook and pull the compact spare tire/cover assembly from under the vehicle. WARNING! 417 NOTE: If either front tire is flat, it may be necessary to jack up the vehicle to remove the compact spare tire/ cover assembly from under the vehicle. Refer to jack engagement locations in the following steps for proper jack placement. Getting under a jacked-up vehicle is dangerous.
418 WHAT TO DO IN EMERGENCIES 4. When the compact spare tire/cover assembly is clear of the vehicle, stand the tire/cover assembly upright and remove the wheel spacer by squeezing the two retaining tabs together. 5. There are two jack engagement locations on each side of the vehicle body. These locations are on the sill flange of the vehicle body. NOTE: Rear jack location is between a pair of downstanding tabs on the sill flange of the vehicle body.
WHAT TO DO IN EMERGENCIES 419 6 Jack Location
420 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 5. Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location.
WHAT TO DO IN EMERGENCIES 10. Lower the vehicle by turning the jack screw to the left. 11. Finish tightening the lug nuts. Push down on the wrench while tightening for increased leverage. Alternate lug nuts until each nut has been tightened twice. Correct wheel nut tightness is 95 ft lbs (130 N·m). If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station. 12. Lower the jack to its fully-closed position.
422 WHAT TO DO IN EMERGENCIES of operation, and after each time a tire is changed, to allow the wheel nuts to become properly set. All nuts should first be firmly seated against the wheel. The nuts should then be tightened to recommended torque. Tighten the nuts to final torque in increments. Progress around the bolt circle, tightening the nut opposite to the nut just previously tightened until final torque is achieved. Recommended torque is 95 ft lbs (130 N·m).
WHAT TO DO IN EMERGENCIES 2. Assemble the winch handle extensions to form the Spare Tire Hook and pull the wheel spacer from under the vehicle. 3. Turn the compact spare tire so that the valve stem is down and place the tire into the spare tire cover assembly. Slide the wheel spacer through the center of the wheel and spare tire cover assembly so that the two retainer tabs snap out and engage the spare tire cover on the opposite side.
424 WHAT TO DO IN EMERGENCIES CAUTION! For vehicles equipped with Stow ’n Go seating, the Winch Mechanism is designed specifically to stow a COMPACT Spare Tire ONLY. Do not attempt to use the Winch to stow the Full Size ’Flat’ Tire, or any other Full Size Tire. Vehicle damage may result. JUMP-STARTING PROCEDURE WARNING! • • • • • • DO NOT attempt to push or tow the vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
WHAT TO DO IN EMERGENCIES When jump-starting, proceed as follows: 1. Wear eye protection and remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. 425 WARNING! DO NOT permit vehicles to touch each other as this could establish a ground connection and personal injury could result. 2. When a boost is provided by a battery in another vehicle, park that vehicle within booster cable reach and without letting the vehicles touch.
426 WHAT TO DO IN EMERGENCIES 6. Start the engine in the vehicle which has the booster battery, let the engine idle a few minutes, then start the engine in the vehicle with the discharged battery. 7. When removing the jumper cables, reverse the above sequence exactly. Be careful of the moving belts and fan.
WHAT TO DO IN EMERGENCIES 427 CAUTION! CAUTION! Racing the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 35 mph (55 km/h). • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result.
428 WHAT TO DO IN EMERGENCIES CAUTION! • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and transmission may result. • If the vehicle being towed requires steering, the ignition switch must be in the OFF position, not in the LOCK or ACC positions. If it is necessary to use the accessories while being towed (wipers, defrosters, etc.), the key must be in the ON position, not the ACC position. Make certain the transmission remains in NEUTRAL.
MAINTAINING YOUR VEHICLE CONTENTS m 3.3L Engine Compartment . . . . . . . . . . . . . . . . 432 m Maintenance Procedures . . . . . . . . . . . . . . . . . . 439 m 3.8L Engine Compartment . . . . . . . . . . . . . . . . 433 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 439 m 4.0L Engine Compartment . . . . . . . . . . . . . . . . 434 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . . 442 m Onboard Diagnostic System — OBD II . . . . . . . . 435 ▫ Drive Belt . . . . . . .
430 MAINTAINING YOUR VEHICLE ▫ Power Steering — Fluid Check . . . . . . . . . . . . 451 ▫ Front Suspension — Ball Joints . . . . . . . . . . . . 451 ▫ Steering Shaft Seal . . . . . . . . . . . . . . . . . . . . 451 ▫ Drive Shaft Universal Joints . . . . . . . . . . . . . . 452 ▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . . 452 ▫ Windshield Wiper Blades . . . . . . . . . . . . . . . . 452 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . . . 454 ▫ Hoses And Vacuum/Vapor Harnesses . .
MAINTAINING YOUR VEHICLE 431 ▫ Fog Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 483 m Fluids And Capacities . . . . . . . . . . . . . . . . . . . 486 ▫ Rear Tail, Stop, Turn Signal, Side Marker And Backup Lights . . . . . . . . . . . . . . . . . . . . 484 m Fluids, Lubricants And Genuine Parts . . . . . . . . 487 ▫ Center High-Mounted Stop Light (CHMSL) . . . 485 ▫ License Light . . . . . . . . . . . . . . . . . . . . . . . . 485 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . .
432 MAINTAINING YOUR VEHICLE 3.
MAINTAINING YOUR VEHICLE 433 3.
434 MAINTAINING YOUR VEHICLE 4.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
436 MAINTAINING YOUR VEHICLE Loose Fuel Filler Cap Message — gASCAP Should the “Loose Fuel Filler Cap” or “gASCAP” message appear, there may be a problem in the evaporative system. Before taking the vehicle into an authorized dealer, check first to see if the fuel filler cap is possibly loose, improperly installed, or damaged. A loose fuel filler cap message will be displayed in the instrument cluster. Tighten the gas cap until a 9clicking9 sound is heard.
MAINTAINING YOUR VEHICLE This vehicle has a simple ignition key-actuated test, which you can use prior to going to the test station. To check if this vehicle’s OBD II system is ready, you must do the following: 1. Insert the ignition key into the ignition switch. 2. Turn the ignition to the ON position, but do not crank or start the engine. 3. If you crank or start the engine, you will have to start this test over. 4.
438 MAINTAINING YOUR VEHICLE serviced before going to the I/M station. The I/M station can fail the vehicle because the MIL is on with the engine running. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. REPLACEMENT PARTS Use of genuine Mopart parts for normal/scheduled maintenance and repairs is highly recommended to ensure the designed performance.
MAINTAINING YOUR VEHICLE MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there are fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance. However, if a malfunction of these items does occur, it could adversely affect the engine or vehicle performance.
440 MAINTAINING YOUR VEHICLE Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” in Section 8 of this manual for information on this system. NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, whichever occurs first. Engine Oil Dipstick CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure.
MAINTAINING YOUR VEHICLE American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. Engine Oil Viscosity (SAE Grade) — 3.3L & 3.8L Gasoline Engines SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy.
442 MAINTAINING YOUR VEHICLE Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed. Materials Added to Engine Oil The manufacture strongly recommends against the addition of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered product and its performance may be impaired by supplemental additives.
MAINTAINING YOUR VEHICLE DRIVE BELT At the mileage indicated in the maintenance schedule, replace the drive belt with a new drive belt. NOTE: The drive belt must be routed correctly to ensure proper drive function. SPARK PLUGS Spark plugs must fire properly to assure engine performance and emission control. New plugs should be installed at the specified mileage. The entire set should be replaced if there is any malfunction due to a faulty spark plug.
444 MAINTAINING YOUR VEHICLE CATALYTIC CONVERTER The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device. Under normal operating conditions, the catalytic converter will not require maintenance. However, it is important to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage.
MAINTAINING YOUR VEHICLE WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine operation, a scorching odor may indicate severe and abnormal catalyst overheating.
446 MAINTAINING YOUR VEHICLE Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts.
MAINTAINING YOUR VEHICLE 447 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post.
448 MAINTAINING YOUR VEHICLE AIR CONDITIONER MAINTENANCE For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a system performance check. Drive belt tension should also be checked at this time. WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system.
MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by an authorized dealer or other an authorized service facility using recovery and recycling equipment.
450 MAINTAINING YOUR VEHICLE 4. Disengage the two retaining tabs that secure the filter cover to the HVAC housing and remove the cover. 6. Install the A/C Air Filter with the arrow on the filter pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover. CAUTION! The A/C Air Filter is labeled with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. 7.
MAINTAINING YOUR VEHICLE POWER STEERING — FLUID CHECK Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized DaimlerChrysler Dealership.
452 MAINTAINING YOUR VEHICLE DRIVE SHAFT UNIVERSAL JOINTS Your vehicle has constant velocity universal joints. Periodic lubrication of these joints is not required. However, the joint boots should be inspected for external leakage or damage when other maintenance is performed. If leakage or damage is evident, the universal joint boot and grease should be replaced immediately. Continued operation could result in failure of the universal joint due to water and dirt contamination of the grease.
MAINTAINING YOUR VEHICLE Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. Windshield and Rear Window Washers The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the engine compartment and should be checked for fluid level at regular intervals.
454 MAINTAINING YOUR VEHICLE COOLING SYSTEM WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. Cooling System — Drain, Flush and Refill The system should be drained, flushed, and refilled at the intervals shown in the “Maintenance Schedule” in Section 8 of this manual. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals.
456 MAINTAINING YOUR VEHICLE Adding Coolant Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to five years or 102,000 mi (170 000 km) before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) coolant.
MAINTAINING YOUR VEHICLE WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle.
458 MAINTAINING YOUR VEHICLE When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points To Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the front of the engine compartment.
MAINTAINING YOUR VEHICLE • Do not change the thermostat for summer or winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions. HOSES AND VACUUM/VAPOR HARNESSES Inspect surfaces of hoses and nylon tubing for evidence of heat and mechanical damage.
460 MAINTAINING YOUR VEHICLE BRAKES In order to assure brake system performance, all brake system components should be inspected periodically. Suggested service intervals can be found in the Maintenance Schedules. WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
MAINTAINING YOUR VEHICLE NOTE: Inspection of brake hoses should be performed whenever the brake system is serviced and every engine oil change. Inspect hydraulic brake hoses for surface cracking, scuffing, or worn spots. If there is any evidence of cracking, scuffing, or worn spots, the hose should be replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failure. WARNING! Worn brake hoses can burst and cause brake failure. You could have an accident.
462 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Do not allow petroleum base fluid to contaminate the brake fluid — all brake seal components could be damaged causing partial or complete brake failure.
MAINTAINING YOUR VEHICLE All six speed transaxles are equipped with a capped dipstick tube, it is sealed and should not be tampered with. Your authorized dealer has the necessary tools to ensure that the fluid level is set properly. Selection of Lubricant It is important that the proper lubricant is used in the transaxle to assure optimum transaxle performance. Use only manufacturer’s recommended transaxle fluid; refer to Fluids, Lubricants and Genuine Parts for correct fluid type.
464 MAINTAINING YOUR VEHICLE Fluid Level Check — 3.3L Engine with Four-Speed Automatic Transaxle — If Equipped The dipstick is located just behind the radiator, lower right side. To properly check the automatic transaxle fluid level, the following procedure must be used: 1. The vehicle must be on level ground. 2. The engine should be running at curb idle speed for a minimum of 60 seconds. 3. Fully apply parking brake. 4.
MAINTAINING YOUR VEHICLE If the fluid level indicates low, add sufficient fluid to bring to the proper level. CAUTION! Do not overfill. Dirt and water in the transaxle can cause serious damage. To prevent dirt and water from entering the transaxle after checking or replenishing fluid, make certain that the dipstick cap is reseated properly. Fluid and Filter Changes Refer to the “Maintenance Schedule” in Section 8 of this manual for the recommended transaxle fluid and filter change intervals.
466 MAINTAINING YOUR VEHICLE trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and underbody protection.
MAINTAINING YOUR VEHICLE • Avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month.
468 MAINTAINING YOUR VEHICLE Wheel and Wheel Trim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels should be cleaned regularly with a mild soap and water to prevent corrosion. To remove heavy soil and/or excessive brake dust, use Mopart Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only Mopart or equivalent is recommended. Do not use oven cleaner.
MAINTAINING YOUR VEHICLE soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean your leather upholstery. Application of a leather conditioner is not required to maintain the original condition. WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
470 MAINTAINING YOUR VEHICLE 2. To maintain the high gloss shine, apply a scratch and swirl remover onto a damp cloth and apply to door applique. Rub the applique with a firm pressure then buff lightly with a clean cotton cloth until a high gloss shine is achieved. Cleaning Headlights Your vehicle has plastic headlights that are lightweight and less susceptible to stone breakage than glass headlights.
MAINTAINING YOUR VEHICLE 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye or clean the seatbelts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the seat belts need cleaning, use a mild soap solution or lukewarm water.
472 MAINTAINING YOUR VEHICLE Installation Place the liner into the cupholder drawer and press the liner into place so that the retention tabs seat into the corresponding openings in the drawer. FUSES/TOTALLY INTEGRATED POWER MODULE (TIPM) The Totally Integrated Power Module (TIPM) is located in the engine compartment near the battery. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed or embossed on the inside of the cover.
MAINTAINING YOUR VEHICLE The numbers inside the TIPM cover correspond to the following table.
474 MAINTAINING YOUR VEHICLE Cartridge Cavity Fuse J18 20 Amp Yellow J19 60 Amp Yellow J20 30 Amp Pink J21 20 Amp Yellow J22 25 Amp Natural M1 — M2 — FUSES/TIPM Mini Description Fuse — Powertrain Control Module (PCM) Trans Range — Radiator Fan — Front Wiper LO/HI — Front/Rear Washer — Sunroof Module 15 Amp Center High Mounted Blue Stop Light (CHMSL)/ Brake Switch 20 Amp Trailer Lighting Yellow FUSES/TIPM Cartridge Mini Cavity Description Fuse Fuse M3 — 20 Amp — Yellow M4 — 10 Amp Trailer Tow Red
MAINTAINING YOUR VEHICLE FUSES/TIPM Cartridge Mini Cavity Description Fuse Fuse M10 — 20 Amp Ignition Off Draw — VeYellow hicle Entertainment System (IOD-VES), Satellite Digital Audio Receiver (SDARS), DVD, HandsFree Module (HFM), Universal Garage Door Opener (UGDO), Vanity Lamp (VANITY LP) M11 — 10 Amp (Ignition Off Draw) IODRed HVAC/ATC, MW SENSR, Underhood Lamp (UH LMP) M12 — 30 Amp Amplifier (AMP) Green 475 FUSES/TIPM Cartridge Mini Cavity Description Fuse Fuse M13 — 20 Amp Ignition Off Draw— Yellow
476 MAINTAINING YOUR VEHICLE FUSES/TIPM Cartridge Mini Cavity Description Fuse Fuse M15 — 20 Amp COL MOD, IR SNS, Yellow Heater Ventilation, Air Conditioning/Automatic Temperature Control (HVAC/ATC), Rear View Mirror (RR VW MIR), Cabin Compartment Node (CCN), Transfer Case Switch (T-CASE SW), RUN/ST, Multi-Function Control Switch (MULTIFTCN SW), Tire Pressure Monitor (TPM), Glow Plug Module (GLW PLG MOD) — Export Diesel Only FUSES/TIPM Cartridge Mini Cavity Description Fuse Fuse M16 — 10 Amp Occupant Res
MAINTAINING YOUR VEHICLE FUSES/TIPM Cartridge Mini Cavity Description Fuse Fuse M21 — 20 Amp Auto Shut Down (ASD Yellow #3) M22 — 10 Amp Right Horn (RT HORN Red (HI/LOW) M23 — 10 Amp Left Horn (LT HORN Red (HI/LOW) M24 — 25 Amp Rear Wiper (REAR Natural WIPER) M25 — 20 Amp Fuel Pump (FUEL PUMP), Yellow Diesel Lift Pump (DSL LIFT PUMP) — Export Only M26 — 10 Amp Power Mirror Switch Red (PWR MIRR SW), Driver Window Switch (DRVR WIND SW) 477 FUSES/TIPM Cartridge Mini Cavity Description Fuse Fuse M27 — 10 Amp
478 MAINTAINING YOUR VEHICLE FUSES/TIPM Cartridge Mini Cavity Description Fuse Fuse M32 — 10 Amp Occupant Restraint ConRed troller (ORC), TT EUROPE M33 — 10 Amp Next Generation ControlRed ler (NGC), Global Powertrain Engine Controller (GPEC) M34 — 10 Amp Park Assist (PRK ASST), Red Heater Ventilation, Air Conditioning Module (HVAC MOD), Headlamp Wash (HDLP WASH), Compass (COMPAS) M35 — 10 Amp Heated Mirrors Red M36 — 20 Amp Power Outlet #3 (BATT) Yellow FUSES/TIPM Cartridge Mini Cavity Description Fuse F
MAINTAINING YOUR VEHICLE CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
480 MAINTAINING YOUR VEHICLE REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Center & Rear Dome Light . . . . . . . . . . . . . . . . . . 578 Center & Rear Reading Lights . . . . . . . . . . . . . . . 578 Front Door Courtesy Light . . . . . . . . . . . . . . . . . . 578 Front Header Reading Lights — If Equipped . . . . . 578 Instrument Cluster Lights . . . . . . . . . . . . . . . . . PC74 Liftgate Light(s). . . . . . . . . . . . . . . . . . . . . . . . . . 578 Overhead Console Reading Lights .
MAINTAINING YOUR VEHICLE BULB REPLACEMENT High Intensity Discharge Headlights (HID) — If Equipped The headlights are a type of high voltage discharge tube. High voltage can remain in the circuit even with the headlight switch off and the key removed. Because of this, you should not attempt to service a headlight bulb yourself. If a headlight bulb fails, take your vehicle to an authorized dealer for service.
482 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 5. Reconnect the wiring connector to bulb. Front Park/Turn Signal and Side Marker Lights 1. Raise the hood to access the rear of the headlight housing. 2. Twist the turn signal socket and remove from the headlight housing, then pull the bulb out. 3.
MAINTAINING YOUR VEHICLE Fog Lights NOTE: Access to the fog light bulb is from the rear of the fascia. On the left rear side of the fascia, remove the push pin and lower the hinged access door on the air dam. 1. From behind the bumper fascia, or the access panel on the air dam, twist the bulb counterclockwise, and remove bulb. 483 CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
484 MAINTAINING YOUR VEHICLE Rear Tail, Stop, Turn Signal, Side Marker and Backup Lights 1. Raise the liftgate. 2. Remove the tail light assembly by removing the two screws from the inboard side. Use a fiber stick or similar tool to gently pry the light on the outboard side to disengage the two ball studs. Removing Tail Light Assembly NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint.
MAINTAINING YOUR VEHICLE 3. Twist the socket and remove form the light assembly. 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and reattach the light assembly. Center High-Mounted Stop Light (CHMSL) The CHMSL uses LED lights that are not serviceable separately. The CHMSL must be replaced as an assembly, see your authorized Dealer. 485 License Light The light for the license plate light is located under the tailgate light bar and above the license plate. 1.
486 MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES FLUIDS AND CAPACITIES U.S. Metric Fuel (approximate) All Engines 20 Gals 76 L Engine Oil with Filter 3.3L and 3.8L (SAE 5W-20 API Certified) 5.0 Qts 4.7 L 4.0L (SAE 10W-30 API Certified) 5.5 Qts 5.2 L Cooling System 3 3.3L, 3.8L and 4.0L (Use Mopart Antifreeze/Coolant Five Year/ 13.4 Qts 12.6 L 100,000 Mile Formula or equivalent.) 3 Includes heater and coolant recovery bottle filled to MAX level. Add 2.9 Qts (2.
MAINTAINING YOUR VEHICLE 487 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine FLUIDS, LUBRICANTS AND GENUINE PARTS — ENGINE Component Fluids, Lubricants and Genuine Parts Coolant Mopart Antifreeze/Coolant Five Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Oil – 3.3L, 3.8L Use API Certified SAE 5W-20 engine oil. Refer to your oil filler cap for correct SAE grade, meeting DaimlerChrysler Material Standard MS-6395. Oil – 4.0L Use API Certified SAE 10W-30 engine oil.
488 MAINTAINING YOUR VEHICLE Chassis FLUIDS, LUBRICANTS AND GENUINE PARTS — CHASSIS Fluids, Lubricants and Genuine Parts Mopart ATF+4 Automatic Transmission Fluid Mopart DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
MAINTENANCE SCHEDULES CONTENTS m Emissions Control System Maintenance . . . . . . . 490 m Maintenance Schedule . . . . . . . . . . . . . . . . . . . 490 ▫ Required Maintenance Intervals . . . . . . . . . . .
M A I N T E N A N C E 490 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emissions Control System. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 mi (10 000 km) or six months, whichever comes first.
M A I N T E N A N C E S C H E D U L E S 8 492 MAINTENANCE SCHEDULES Once A Month At Each Oil Change • Check tire pressure and look for unusual wear or damage. • Change the engine oil filter. • Inspect the battery and clean and tighten the terminals as required. • Check the fluid levels of coolant reservoir, brake master cylinder, power steering and transmission and add as needed. • Check all lights and other electrical items for correct operation. • Inspect the brake hoses and lines.
MAINTENANCE SCHEDULES 493 M Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the engine oil and engine oil filter. Rotate Tires. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter, replace if necessary. Inspect the brake linings, replace if necessary. Replace the air conditioning filter. Inspect the CV Joints.
M 494 MAINTENANCE SCHEDULES A I N T E N Maintenance Items A N Change the automatic transmission fluid & filter if C using your vehicle for any of the following: police, E taxi, fleet or frequent trailer towing. S C H E D U L E S 8 Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Inspect and replace PCV valve if necessary. † Flush and replace the engine coolant. Replace the ignition cables on 3.3L, 3.8L engines. Replace the spark plugs on 3.3L, 3.8L, 4.
MAINTENANCE SCHEDULES WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS m Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . 499 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . . 501 ▫ Prepare For The Appointment . . . . . . . . . . . . 499 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . . 501 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 499 m Warranty Information (U.S. Vehicles Only) . . . . .
498 IF YOU NEED CONSUMER ASSISTANCE m Publication Order Forms . . . . . . . . . . . . . . . . . . 504 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . 505 m Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 505 ▫ Temperature Grades . . . . . . . . . . . . . . . . . . . 506 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
500 IF YOU NEED CONSUMER ASSISTANCE high quality service. The manufacturer’s authorized dealers have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner. • Owner’s telephone number (home and office) This is why you should always talk to an authorized dealer’s service manager first. Most matters can be resolved with this process.
IF YOU NEED CONSUMER ASSISTANCE In Mexico contact: Av. Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P. 05109 Mexico, D. F. In Mexico City: 5081-4568 Outside Mexico City: 1-800-505-1300 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its Customer Center.
502 IF YOU NEED CONSUMER ASSISTANCE Contract, and you require service after the manufacturer’s New Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in those documents. We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience.
IF YOU NEED CONSUMER ASSISTANCE MOPART PARTS Mopart fluids, lubricants, parts, and accessories are available from an authorized dealer. They will help keep the vehicle operating at its best. REPORTING SAFETY DEFECTS In The 50 United States And Washington, D.C. If you believe that your vehicle has a defect that could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying the manufacturer.
504 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is required when ordering manuals (no P.O. Boxes).
IF YOU NEED CONSUMER ASSISTANCE Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1143 (Canada) Or Visit us on the Worldwide Web at: • www.techauthority.com DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle.
506 IF YOU NEED CONSUMER ASSISTANCE WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10
508 INDEX Adding Engine Coolant (Antifreeze) . . . . . . . . . . 456 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 383 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 453 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 381 Adjustable Pedals . . . . . . . . . . . . . . . . . . . . . . . 175 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 443 Air Conditioner Maintenance . . . . . . . . . . . . . . . 448 Air Conditioning . . . . . . . . . . . . . . .
INDEX Automatic Dimming Mirror . . . . . . . . . . . . . . . . 100 Automatic Door Locks . . . . . . . . . . . . . . . . . . . 33,34 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 162 Automatic Temperature Control (ATC) . . . . . . . . . 311 Automatic Transaxle . . . . . . . . . . . . . . . . . . . . . . 330 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . . . 463 Fluid Level Check . . . . . . . . . . . . . . . . . . . . . . 463 Interlock System . . . . . . . . . . . . . . . . . . .
510 INDEX Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339,460 Brake/Transmission Interlock . . . . . . . . . . . . . . . 330 Break-In Recommendations, New Vehicle . . . . . . . . 92 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . 481 Bulbs, Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 Calibration, Compass . . . . . . . . . . . . . . . . . . 242,247 Capacities, Fluid . . . . . . . . . . . . . . . . . . . . . . . . 486 Caps, Filler Fuel . . . . . . .
INDEX Coin Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 Cold Weather Operation . . . . . . . . . . . . . . . . . . . 327 Compact Disc (CD) Maintenance . . . . . . . . . . . . . 301 Compact Spare Tire . . . . . . . . . . . . . . . . . . . . . . 362 Compass . . . . . . . . . . . . . . . . . . . . . . . . 239,242,247 Compass Calibration . . . . . . . . . . . . . . . . . . 242,247 Compass Variance . . . . . . . . . . . . . . . . . . . . 241,248 Computer, Trip/Travel . . . . . . . . . . . .
512 INDEX Digital Video Disc (DVD) Player . . . . . . . . . . 282,285 Dimmer Control . . . . . . . . . . . . . . . . . . . . . . . . 160 Dimmer Switch, Headlight . . . . . . . . . . . . . . . . . 168 Dipsticks Automatic Transaxle . . . . . . . . . . . . . . . . . . . . 463 Automatic Transmission . . . . . . . . . . . . . . . . . 464 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . 439 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . 427 Disposal Antifreeze (Engine Coolant) . .
INDEX Emission Control System Maintenance . . . . . . 436,490 Engine . . . . . . . . . . . . . . . . . . . . . . . . 92,432,433,434 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 443 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . . 329 Break-In Recommendations . . . . . . . . . . . . . . . . 92 Checking Oil Level . . . . . . . . . . . . . . . . . . . . . 439 Compartment . . . . . . . . . . . . . . . . . . . . . . 433,434 Coolant (Antifreeze) . . . . . . . . . . . . . . . . .
514 INDEX Flashers Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . 410 Turn Signal . . . . . . . . . . . . . . . . . . . . . 229,482,484 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Flat Tire Stowage . . . . . . . . . . . . . . . . . . . . . . . . 421 Flexible Fuel Vehicles Cruising Range . . . . . . . . . . . . . . . . . . . . . . . . 389 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 Fuel Requirements . . . . . . . . . . . . . . . . . .
INDEX Requirements . . . . . . . . . . . . . . . . . . . . . . 379,486 System Hoses . . . . . . . . . . . . . . . . . . . . . . . . . 459 Tank Capacity . . . . . . . . . . . . . . . . . . . . . . . . 486 Fuel, Flexible . . . . . . . . . . . . . See Flexible Fuel Vehicles Fuel System Caution . . . . . . . . . . . . . . . . . . . . . 382 Fueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
516 INDEX Passing . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing . . . . . . . . . . . . . . . . . . . . . . . . . Time Delay . . . . . . . . . . . . . . . . . . . . . . . Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . Heater, Engine Block . . . . . . . . . . . . . . . . . . High Beam/Low Beam Select (Dimmer) Switch Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . .
INDEX Key, Sentry (Immobilizer) Key-In Reminder . . . . . . Keyless Entry System . . . Keys . . . . . . . . . . . . . . Knee Bolster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 15 21 12 67 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . 56 LATCH (Lower Anchors and Tether for CHildren) . . . . . . .
518 INDEX Interior . . . . . . . . . . . . . . . . . . . . . . . . . . 159,160 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485 Lights On Reminder . . . . . . . . . . . . . . . . . . . . 164 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 Malfunction Indicator (Check Engine) . . . . . . . . 233 Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 229 Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161,482 Passing . . . . . . . . . . . .
INDEX Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 504 Map/Reading Lights . . . . . . . . . . . . . . . . . . . . . 181 Memory Feature (Memory Seat) . . . . . . . . . . . . . 153 Memory Seat . . . . . . . . . . . . . . . . . . . . . . . . 104,153 Mini-Trip Computer . . . . . . . . . . . . . . . . . . . 239,246 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Automatic Dimming . . . . . . . . . . . . . . . . . . . . 100 Electric Remote . . . . . . . . . . . . .
520 INDEX Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . 441,486 Onboard Diagnostic System . . . . . . . . . . . . . . 435,436 Opener, Garage Door (HomeLinkt) . . . . . . . . . . . 183 Outside Rearview Mirrors . . . . . . . . . . . . . . . 100,101 Overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . 334,335 Overhead Console . . . . . . . . . . . . . . . . . . . . . . . 180 Overhead Travel Information Center . . .
INDEX Power Steering Fluid . . . . . . . . . . . . . . . . . . . . . 488 Pregnant Women and Seat Belts . . . . . . . . . . . . . . 65 Preparation for Jacking . . . . . . . . . . . . . . . . . . . . 414 Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Programmable Electronic Features . . . . . . . . . . . . 249 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 362 Radiator Cap (Coolant Pressure Cap) . . . . . . . 455,456 Radio Broadcast Signals . . . . .
522 INDEX Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 369 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 93 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 94 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 503 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 51 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 351 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Satellite Radio . . . .
INDEX Sentry Key Programming . . . . . . . . . . . . . . . . . . . 17 Sentry Key Replacement . . . . . . . . . . . . . . . . . . . 16 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 499 Service Contract . . . . . . . . . . . . . . . . . . . . . . . . . 501 Service Engine Soon Light (Malfunction Indicator) . . . . . . . . . . . . . . . . . . . . 233 Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 504 Setting the Clock . . . . . . . . . . . . . . . .
524 INDEX Storing Your Vehicle . . . . . . . . . . . . . . . . . . . . . . 479 Stow 8n Go (Fold in Floor) Seats . . . . . . . . . . . . . 137 Sun Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 Sunglasses Storage . . . . . . . . . . . . . . . . . . . . . . . 181 Sunroof Maintenance . . . . . . . . . . . . . . . . . . . . . 192 Supplemental Restraint System - Airbag . . . . . . . . 66 Swivel 8n Go Seats . . . . . . . . . . . . . . . . . . . . . . . 146 Synthetic Engine Oil . . . . . .
INDEX Replacement . . . . . . . . . . . . . . . . . . . . . . . . . 366 Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 351,359 Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . 369 Spare Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . 413 Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . .
526 INDEX Transmitter, Remote Keyless Entry (RKE) . . . . . . . . 21 Transporting Pets . . . . . . . . . . . . . . . . . . . . . . . . 88 Tread Wear Indicators . . . . . . . . . . . . . . . . . . . . 365 Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . 239 Trip Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 236 Turn Signals . . . . . . . . . . . . . . . . . . . 165,229,482,484 UCI Connector . . . . . . . . . . . . . . . . . . . . . . . . . 293 UConnect™ (Hands-Free Phone) .
INDEX Wheel and Wheel Trim . . . . . . . . . . . . . . . . . . . . 468 Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 468 Wheel Bearings . . . . . . . . . . . . . . . . . . . . . . . . . 465 Wheel Nut Torque . . . . . . . . . . . . . . . . . . . . . . . 421 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 40,192 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 320 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Power . . . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2008 Town & Countr y 2008 OWNER’ S MANUAL 81-026-0817 Third Edition Printed in U.S.A.
