Technical information

2005 PCM CONFIGURATION
YEAR/MODEL PCM TYPE
CS, DR, JR, KJ, PL, PT, RG, RS, TJ NGC3
PT (BUX) 1.6 SIM70
PT 2.2 Diesel, RG 2.5/2.8 Diesel EDC15-C5
KJ 2.8 Diesel EDC16
ZB and SRT - 10 JTEC +
DH 5.9 Diesel Cummins CM848
ZH ME 2.8 Bosch
ST-22 MMC - Melco
2006 PCM CONFIGURATION
YEAR/MODEL PCM TYPE
DR, JR, KJ, PL, PT, RG, RS, TJ NGC3
CS NGC3A
PT (BUX) 1.6L SIM70
KJ 2.8 Diesel, PT 2.2 Diesel, RG 2.5/2.8 Diesel EDC15-C5
ZB and SRT - 10 JTEC +
DH 5.9 Diesel Cummins CM848
ZH ME 2.8 Bosch
ST-22 MMC - Melco
The TCM Configuration Tables apply to vehicles that use an EATX/NGC/AW4 controller.
Applications using the PCM module (JTEC/SBEC) for assisting transmission shifting or
TCC operation are not listed since the transmissions are not fully electronic.
1992 - 2000 TCM CONFIGURATION
YEAR/MODEL TCM TYPE
92 All FWD except BB EATX*
93-95 All FWD (only LH is flash capable) EATX 2**
96-97 All FWD EATX 3
98-00 All FWD except PL EATX 3A
92-00 XJ 4.0 AW4
99-00 AN, DN, WJ/WG 4.7 EATX 4***
* EATX controllers (89-92) are NOT flash programmable, all supersede to EATX 2.
** EATX 2 controllers need CH5500 for flash reprogramming.
18-037-05 -16-