Technical information

Enhanced Abort Recovery Screens
A prior attempt to flash the
NGC ETC engine control module on a
2003 DR 5.7L V8 vehicle,
was interrupted. Press YES if
you want to attempt abort
recovery or NO to decline. If
you press NO, you will lose
abort recovery data that was
saved earlier!
Pressing the “NO” key for the above screen causes the DRBIII® to prompt:
Are you sure you want to
erase the abort-recovery
data? Press YES to erase or
NO to keep the saved data
If you press “YES”, you will be forced to use the original abort recovery method. See the
original abort recovery screen below.
___________________________________________________________________________
Original Abort Recovery Screen
Could not determine engine
controller type. Please
select from list.
FCC
SBEC2
SBEC3
SBEC3A/SBEC3A+/SBEC3B
JTEC (98 and earlier)
JTEC+ (99 and later)
CUMMINS CM551/CM845/CM848
NGC
SIM70
Make Selection & Press Enter
1992 - 1999 PCM CONFIGURATION
YEAR/ MODEL PCM TYPE
92-95 All, 96-97 ZG, XJ 2.5 Diesel except 94 LH, 95
FJ/JA/J2/LH/PL/P1, 93-95 AA/AS
SBEC 2
94 LH, 93 AA/AS SBEC 2A
95 LH, 94-95 AA/AS SBEC 2B
95 FJ/F24S 2.5, JA, J2 SBEC 3
95 FJ/24S 2.0 DOHC, PL, P1 FCC
96-97 All except SR, Truck and Jeep, 97 FJ/JA/JX SBEC 3
-13- 18-037-05