new vehicle Instrution Manual

• The “DELAY” symbol will flash to indicate that the
feature as been disabled.
This feature may be enabled using the following proce-
dure:
• Press and hold the Heated Rear Window and Auto HI
buttons for 5 seconds.
• The “DELAY” symbol will flash to indicate that the
feature as been enabled.
Power Button
This button turns the entire system ON/OFF. When the
system is turned on it will return to the previous settings.
Dual/Single Zone Operation
When ⬙DUAL⬙ is displayed in the ATC control unit, the
driver and passenger air outlet temperatures can be
individually adjusted from the two independent ⬙TEMP⬙
buttons. When a front seat passenger is not present,
pressing the ⬙DUAL⬙ button will disable the passenger’s
infrared sensor and control the entire system based only
on the driver’s temperature setting. The outside tempera-
ture will replace the passenger’s temperature setting in
the display. Pressing the ⬙DUAL⬙ button a second time or
adjusting the passenger’s ⬙TEMP⬙ button will reactivate
the passenger’s infrared sensor and return the system to
dual independent temperature operation.
Manual Operation
This system offers a full complement of manual override
features. The indicator light in both the ⬙AUTO HI⬙ or
⬙AUTO LO⬙ buttons will turn off when the system is
being used in the manual mode. The fan speed, airflow
distribution, and outside air/recirculated air can be
manually adjusted.
NOTE: Each of these features can be operate indepen-
dently from each other. If any one feature is controlled
manually, the remaining features will continue to operate
automatically.
UNDERSTANDING YOUR INSTRUMENT PANEL 197
4