Installation manual

PVT-MCT10A-EN Page | 38
7.4 Junction Boxes
The Chromasun Junction Boxes were designed to simplify installation of Chromasun HT System.
A Chromasun Junction Box connects an MCT String to the Chromasun SFC. This makes it so that
bare wire can be used for the homeruns. The wire is connected to the junction panel inside of
the Chromasun SFC. The bare wire is then run inside of an appropriate conduit specified in the
design layout. The bare wire terminates in the string end Chromasun Junction box. Then the
MCT-HT panel connects to the Chromasun Junction Box with a PDV interconnect.