User`s manual

13
GBGB
GBGB
GB
The Out 2 reset will be made when the logic input
will be closed.
For other details see paragraph
"5.7 Timer"5.7 Timer
"5.7 Timer"5.7 Timer
"5.7 Timer
modes description".modes description".
modes description".modes description".
modes description".
Timer mode 6 [P22 = 10]Timer mode 6 [P22 = 10]
Timer mode 6 [P22 = 10]Timer mode 6 [P22 = 10]
Timer mode 6 [P22 = 10]
The instrument starts in "Power OFF" mode and it
remains in "Power OFF" mode until the contact is
closed.
When the contact has been opened the instrument
operate as follows:
- it starts the control using SP set point.
- it starts the time count down
- it energizes the Output 2
Notes:Notes:
Notes:Notes:
Notes:
1) The guarantee soak function can be applied to
this timer mode (see P28 parameter)
2) The transfer from "Power OFF" mode to
AUTOMATIC mode starts the "Soft start" and the
"alarm masking" functions (if programmed).
When the time count is equal to 0 the instrument
comes back to the "Power OFF" mode and the
output 2 will be reset.
For other details see paragraph
"5.7 Timer"5.7 Timer
"5.7 Timer"5.7 Timer
"5.7 Timer
modes description".modes description".
modes description".modes description".
modes description".
Timer mode 7 [P22 = 11]Timer mode 7 [P22 = 11]
Timer mode 7 [P22 = 11]Timer mode 7 [P22 = 11]
Timer mode 7 [P22 = 11]
The instrument starts in "Power OFF" mode and it
remains in "Power OFF" mode until a transfer from
open to close of the logic input is detected.
When the instrument detects the transfer from
contact open to close it starts the control using
SP set point and starts the time count down.
Notes:Notes:
Notes:Notes:
Notes:
1) The guarantee soak function can be applied to
this timer mode (see P28 parameter)
2) The transfer from "Power OFF" mode to
AUTOMATIC mode starts the "Soft start" and the
"alarm masking" functions (if programmed).
When the time count is equal to 0 the instrument
comes back to the "Power OFF" mode .
For other details see paragraph
"5.7 Timer"5.7 Timer
"5.7 Timer"5.7 Timer
"5.7 Timer
modes description".modes description".
modes description".modes description".
modes description".
P23 = Alarm 2 configurationP23 = Alarm 2 configuration
P23 = Alarm 2 configurationP23 = Alarm 2 configuration
P23 = Alarm 2 configuration
P23 is skipped when P22 is equal to 0
If P22 = 1 or 3
H.A.H.A.
H.A.H.A.
H.A. =
High alarm with automatic reset
L.A.L.A.
L.A.L.A.
L.A. = Low alarm with automatic reset
H.L.H.L.
H.L.H.L.
H.L. = High alarm with manual reset
L.L.L.L.
L.L.L.L.
L.L. = Low alarm with manual reset
If P22 = 2:
H.A.H.A.
H.A.H.A.
H.A. =
out of band with automatic reset
L.A.L.A.
L.A.L.A.
L.A. = in band with automatic reset
H.L.H.L.
H.L.H.L.
H.L. = out of band with manual reset
L.L.L.L.
L.L.L.L.
L.L. = in band with manual reset
P24 = Alarm 2 actionP24 = Alarm 2 action
P24 = Alarm 2 actionP24 = Alarm 2 action
P24 = Alarm 2 action
P24 is available when P22 is 1, 2 or 3.
rEUrEU
rEUrEU
rEU = reverse (relay de-energized in alarm
condition)
dirdir
dirdir
dir = direct (relay energized in alarm condition)
P25 = Stand-by of the alarm 2P25 = Stand-by of the alarm 2
P25 = Stand-by of the alarm 2P25 = Stand-by of the alarm 2
P25 = Stand-by of the alarm 2
P25 is available when P5 is 1, 2 or 3.
OFFOFF
OFFOFF
OFF = stand-by disabled
ONON
ONON
ON = stand-by enabled
1601-03-1-CX.pmd 13/01/2004, 10.4213