User manual
Studio Force V 12 / T 12 / D 12 / D XT 12 User Manual 7 V1.3 March 2015
www.chroma
-
q.com
Display Mode:
The LCD is backlit when you access the menus. This will turn off when left undisturbed for 5 seconds.
Control Modes:
Grouping
-
--
-
The Studio Force V 12 / T 12 / D 12 / D XT 12 consist of 2 LED engines with 24 white LEDs each. The two engines
can be controlled as a one group “All” or as two separate groups “Duo”.
Studio Force D 12, D XT 12 & T 12:
8 channels
(Dim8x) 1 control channel directly affecting the intensity of 6 LEDs per engine.
2 channels
(FxDim) 1 control channel directly affecting the intensity of all the LEDs and 1 control channel for
intensity effects.
2 channels
(Dim2x) 1 control channel directly affecting the intensity of 24 LEDs per engine.
1 channel (Dim1x) 1 control channel directly affecting the intensity of all the LEDs.
1 channel (Look Select) 1 control channel directly selecting scenes from the look store.
Studio Force V 12:
8 channels
(WWWW) 1 control channel directly affecting the intensity of 6 LEDs per engine.
3 channels
(sWWCW) 1 control channel for intensity effects, the 2
nd
control channel directly affecting the intensity of
all warm white LEDs and the 3
rd
channel directly affecting the intensity of all cold white LEDs.
2 channels
(WW/CW) 1 control channel directly affecting the intensity of all warm white LEDs and the 2
nd
control
channel directly affecting the intensity of all cold white LEDs.
2 channels
(CTI) 1 control channel for Colour Temperature adjustment and the 2
nd
control channel for Intensity
level.
1 channel (Look Select) 1 control channel directly selecting scenes from the look store.
Other Control Modes (Both Models):
Internal FX engine:
integrated in the software is an internal Fx engine with variable parameters to create an unlimited amount of
unique lighting effects.
Master Standalone
– assigns the unit to be the Master unit where standalone control options are set.
Slave Standalone
–
assigns the unit to be the Slave unit and follows the control options assigned to the Master unit.
Manual
–
gives manual control for the Intensity level (Studio Force D 12, D XT 12 & T 12), and Intensity and Colour
Temperature (Studio Force V 12)
Control Menu
Use the push buttons (up/down arrows) to scroll through the control menu options:
Home / DMX Address