User manual

Color Block PSU-30 User Manual 16 V2.0 September 2012
www.chroma
-
q.com
Note: Due to the higher levels of leakage current of the PSU-30 it is important that the XLR4 cables used are manufactured
only to the specification detailed above. It is also important that the cables are not coupled or uncoupled whilst the PSU is
powered and that the PSU is correctly grounded.
DMX - XLR5
Pin 1 = ground/shield, pin 2 = control minus, pin 3 = control plus, pins 4 and 5 are not used.
SYNC - RJ45
Used to synchronise the FX running on multiple PSU-30s. A straight wired RJ45 patch cable is suitable to connect units (not
a crossover cable).
Note: The SYNC connector on the PSU-30 is not using Ethernet.