User manual

Color One 100 User Manual 6 V1.2 September 2014
www.chroma
-
q.com
2.3 Mounting
The Color One 100 is
built with a dual yoke system
for
floor mounting and overhead hanging
applications.
Secure the fixture with a safety bond when hung. A provision for a fixing hold is built into the fixture.
2.4 Optics
The Color One 100 is
built with
an
optical lens
that
provide
s
a
fully homogenised
beam angle of ap
proximately ~
20
°
.
2.5 Control
The Color One 100 is controlled remotely via ANSI E1.11 USITT DMX512-A protocol or can operate as a standalone unit with
the wireless IR Remote. The control functions can be accessed through the LCD display at the rear of the fixture with 4 push
buttons.
Back Arrow (Enter) Stores the menu choice
Up Arrow Increases (+) the mode level or value
Down Arrow Decreases (-) the mode level or value
Exit Back to the previous menu
Power-Up Display:
On power-up, the display shows the Brand, Model Name and Software Version for 5 seconds then goes on to show the Main
Menu. The Main Menu shows:
•
Model Name
•
DMX Status
•
DMX Address
•
Set Control Personality (Mode)
•
Number of Assigned Channels