User manual

Color One 100 User Manual 12 V1.2 September 2014
www.chroma
-
q.com
4-Technical
In this mode,
•
Software Version is displayed
•
DMX Data (value) for each LED circuit/colour are displayed
•
Internal temperature is displayed
•
The fixture can be set to 4 frequency options. The LED scan rate can be synchronised with the video
camera to avoid a flickering effect.
Frequency options:
750 Hz 1500 Hz 3000 Hz 6000 Hz
•
Calibration data for each LED circuit/colour are displayed
To display the Software Version,
1. From the Main Menu, press Up
UpUp
Up or Down
DownDown
Down to access 4-Technical
2. Press Enter
EnterEnter
Enter, the display shows the Software Version
To display DMX Data,
1. From the Main Menu, press Up
UpUp
Up or Down
DownDown
Down to access 4-Technical
2. Press Enter
EnterEnter
Enter, Up
UpUp
Up or Down
DownDown
Down and select DMX Data
3. Press Enter
EnterEnter
Enter, the display shows the DMX channel values
To display the temperature of the LED Engine in the fixture,
1. From the Main Menu, press Up
UpUp
Up or Down
DownDown
Down to access 4-Technical
2. Press Enter
EnterEnter
Enter, Up
UpUp
Up or Down
DownDown
Down and select Temperature
3. Press Enter
EnterEnter
Enter, the display shows the LED Engine Temperature
To set the Frequency,
1. From the Main Menu, press Up
UpUp
Up or Down
DownDown
Down to access 4-Technical
2. Press Enter
EnterEnter
Enter, Up
UpUp
Up or Down
DownDown
Down and select PWM Frequency
3. Press Enter
EnterEnter
Enter, Up
UpUp
Up or Down
DownDown
Down and select a frequency option
4. Press Enter
EnterEnter
Enter to save
The display shows Done and returns 4-Technical and then Main Menu.
To display the Calibration data,
1. From the Main Menu
Main MenuMain Menu
Main Menu, press Up
UpUp
Up or Down
DownDown
Down to access 4-Technical
2. Press Enter
EnterEnter
Enter, Up
UpUp
Up or Down
DownDown
Down and select Calibration
3. Calibration data of each LED circuit/color are displayed