User manual

Color Block 2 Plus User Manual 15 V2.2 October 2013
www.chroma
-
q.com
8. Repeat steps 4 to 7 for each channel.
Time Triggers
Time TriggersTime Triggers
Time Triggers
The PSU05B/PSU30 has real time triggering of the internal Looks.
1. Scroll the wheel and select “Time Trigger”
2. Press Enter
3. Press Enter to toggle between Day, Hour (24), Minutes and Look to be triggered
4. Scroll the wheel to adjust the setting
5. Press Enter for 2 seconds to save.
By default Time Triggers occurs on all 7 days unless specified. The triggers will only be activated when the
feature “When DMX is Lost” is set to Trig.
Set Day and Time
Set Day and TimeSet Day and Time
Set Day and Time
To set the Day and Time,
1. Scroll the wheel and select “Set Day and Time”
2. Press Enter to toggle between Day, Hour (24) and Minutes,
3. Scroll the wheel to adjust the settings
4. Press Enter for 2 seconds to save.
Display Backlight (Displ. Backlight)
Display Backlight (Displ. Backlight)Display Backlight (Displ. Backlight)
Display Backlight (Displ. Backlight)
The LED display can be set to go off after 5 seconds of no activity.
To set the Display backlight,
1. Scroll the wheel and select “Displ. Backlight”
2. Press Enter
3. Scroll wheel to On (permanently) or Off (after 5 seconds)
4. Press Enter for 2 seconds to save.
Reset to Default
Reset to DefaultReset to Default
Reset to Default
To reset all menu items to the factory default,
1. Scroll the wheel to select “Reset to Default”
2. Press Enter for 2 seconds until the screen shows “resetting”
The control menu items are reset to factory default settings:
DMX address 001
Control Mode 1 (67 or 367 channels FxHSI)
When DMX is Lost Hold
Look Store Default
Display On
Frequency 360
System CB2
System
SystemSystem
System
The PSU05B/PSU30 can be set to operate for the Color Block DB4 system (CB1) and the Color Block 2 system
(CB2).
1. Scroll the wheel and select “System”
2. Press Enter
3. Scroll the wheel and select CB1 or CB2
4. Press Enter for 2 seconds to save.
Frequency
FrequencyFrequency
Frequency
The PSU05B/PSU30 has four frequency settings available - 360, 600, 1200, 2400. This allows for the LED scan
rate to be synchronised with the video camera and avoid a flickering effect.
To set the frequency,
1. Scroll the wheel and select “Frequency”
2. Press Enter