User manual
Color Block 2 Plus User Manual 13 V2.2 October 2013
www.chroma
-
q.com
Internal FX engine:
Internal FX engine: Internal FX engine:
Internal FX engine:
Modes 1, 4, and 7 incorporate a comprehensive internal FX engine with seven variable parameters to create an unlimited amount
of unique lighting effects.
* Magic Amber is the term used for the unit's ability to bring in Amber when mixing only RGB
Control Menu
Control MenuControl Menu
Control Menu
1. Use the wheel to scroll through the control menu options.
2. Press Enter to select a menu option.
3. Press Enter for 2 seconds to save and the screen goes back to Home.
4. Or press Exit to exit without saving.
Main Menu
Main MenuMain Menu
Main Menu
/ DMX Address
/ DMX Address/ DMX Address
/ DMX Address
To set the DMX start address of the PSU-05B/PSU-30,
1. Press Enter
2. Scroll the wheel to adjust DMX start address
3. Press Enter for 2 seconds to save
The screen goes back to Home with the new start address.
Control Mode
Control Mode Control Mode
Control Mode
The PSU05B/PSU30 can be set to operate in 16 DMX controlled modes for the Color Block 2 Plus system (CB2 -
Go to “System” and select “CB2”).
3 grouping options are available (single-grouped, block-grouped, all-grouped) with 5 control options: FxHSI, HSI,
RGB (with *Magic Amber), RGBA, RGBI (with *Magic Amber), pre-programmed looks and standalone effects.
Refer to the list below for details.
Mode
ModeMode
Mode
Group
GroupGroup
Group
Ch
ChCh
Ch
PSU05B
PSU05BPSU05B
PSU05B
System: CB2
System: CB2System: CB2
System: CB2
Ch
ChCh
Ch
PSU30
PSU30PSU30
PSU30
System: CB2
System: CB2System: CB2
System: CB2
1
Variable 67 7FX + 20 x HSI 367 7FX + 120 x HSI
2 Single 60 20 x HSI 360 120 x HSI
3 Single 60 20 x RGB (with *Magic Amber) 360 120 x RGB (with *Magic Amber)
4 Block 21 6FX + 5 x HSI 96 6FX + 30 x HSI
5 Block 15 5 x HSI 90 30 x HSI
6 Block 15 5 x RGB (with *Magic Amber) 90 30 x RGB (with *Magic Amber)
7 All 9 6FX + HSI 9 6FX + HSI
8 All 3 1 x HSI 3 HSI
9 All 3 1 x RGB (with *Magic Amber) 3 RGB (with *Magic Amber)
10 Single 80 20 x RGBA 480 120 x RGBA
11 Single 80 20 x RGBI (with *Magic Amber) 480 120 x RGBI (with *Magic Amber)
12 Block 20 5 x RGBA 120 30 x RGBA
13 Block 20 5 x RGBI (with *Magic Amber) 120 30 x RGBI (with *Magic Amber)
14 All 4 RGBA 4 RGBA
15 All 4 RGBI (with *Magic Amber) 4 RGBI (with *Magic Amber)
16 Any 1 Look Select 1 Look Select
When D
When DWhen D
When DMX is Lost
MX is Lost MX is Lost
MX is Lost
If DMX is not detected various output options can be selected:
To select the output option,
1. Scroll the wheel to select “When DMX is Lost”
2. Press Enter
Off Snaps to Off
Hold Holds the last valid DMX state
Trig Defaults to Time Trigger operation
Look 1-31
Snaps to the selected Look