User manual

Color Block 2 Plus User Manual 9 V2.2 October 2013
www.chroma
-
q.com
The Color Block 2 Plus fixture is supplied with an integral M10 clinch nuts at
each end. These can be used to attach the Color Block 2 fixture to a standard
hook clamp.
Note:
Note:Note:
Note: damage may occur if the bolt is too long. (M10x16 maximum)
b.
b.b.
b. Batten bracket kit for up to five fixtures
Batten bracket kit for up to five fixturesBatten bracket kit for up to five fixtures
Batten bracket kit for up to five fixtures
The batten bracket set is supplied as a pair of brackets with fibre washers and thumb wheels.
The batten bracket set can be used for floor mounting (see photo), direct wall mounting and
truss mounting when used in conjunction with hook clamps or half couplers.
c.
c.c.
c. Yoke kit for single fixture
Yoke kit for single fixtureYoke kit for single fixture
Yoke kit for single fixture
The yoke kit for single fixture is supplied as a yoke bracket with fibre washers and thumb wheels.
The yoke kit can be used for floor mounting (see photo), direct wall mounting and truss mounting when used in conjunction with
hook clamps or half couplers.
d.
d.d.
d. Dual mode yoke kit for single fixture
Dual mode yoke kit for single fixtureDual mode yoke kit for single fixture
Dual mode yoke kit for single fixture
The dual mode yoke kit for single fixture is supplied with fibre washers and thumb wheels. The dual mode yoke combines the
function of the single yoke and the batten bracket.