User manual

Color Force User Manual 8 V1.7 November 2013
www.chroma
-
q.com
Color Force 48
Color Force 48Color Force 48
Color Force 48
Mode
ModeMode
Mode Group
GroupGroup
Group Ch
ChCh
Ch Description
DescriptionDescription
Description
1 Variable 31 7fx + 8 x HSI -or-
7fx + 8 x RGB(A) with Ch5 @ Full & Ch2 as Intensity Master
2 Cell 24 8 x HSI
3 Cell 24 8 x RGB (with *Magic Amber)
4 Cell 32 8 x RGBA
5 Cell 33 1s + 8 x RGBI (with *Magic Amber)
6 All 9 6fx + HSI -or-
6fx + RGB(A) with Ch4 @ Full & Ch1 as Intensity Master
7 All 3 1 x HSI
8 All 3 1 x RGB (with *Magic Amber)
9 All 4 1 x RGBA
10 All 5 1s + RGBI (with *Magic Amber)
11 1 Look Select
12 Master stand-alone
13 Slave stand-alone
When DMX is Lost
When DMX is Lost When DMX is Lost
When DMX is Lost
If DMX is not detected various output options can be selected in this mode:
Off will snap to off
Hold will hold the last valid DMX state
Look 1-31 will snap to the Look of your choice
Look Store
Look StoreLook Store
Look Store
The Color Force has 31 internal preset FX Looks for stand-alone operation, 1-23 are pre-programmed.
To replay a Look in stand-alone operation,
1. In “Look Store”, select a Look.
2. Press Enter for 2 seconds to save.
To replay a Look with a DMX console,
1. Set the fixture to “Control Mode 11”.
2. Use the DMX console with the assigned channel to playback the various looks stored. (1-31 looks in 1
single channel)
Note:
Note:Note:
Note: DMX has priority over internal Looks.
Looks can be recorded to the internal flash memory by users and will be preserved on power down. However,
looks will be returned to default setting if Reset is performed. There are two ways to record a look:
Simple, with
Simple, with Simple, with
Simple, with DMX console:
DMX console:DMX console:
DMX console:
1. Set the Color Force to the desired Control Mode.
2. Use a DMX console to adjust channel levels and create the desired look or effect.
3. Go to “Look Store” and select the Look number where the created Look will be stored.
4. Press Enter for 2 seconds to save the Look.
A
AA
Advanced, stand
dvanced, standdvanced, stand
dvanced, stand-
--
-alone
alonealone
alone:
::
: (DMX is unplugged)
1. In “Look Store”, select a Look.
2. Press Enter to access the memory data. The data is presented as two numbers separated by a letter “c”.